Netscout University - Lab - How To Access The Sightline Graphical Interface
Netscout University - Lab - How To Access The Sightline Graphical Interface
Finished
First Steps
Lab Description
In this exercise, we'll learn how to access the Sightline graphical interface, and then we'll get
started and take a closer look at the UI navigation options available.
Duration:
20 minutes
Platform:
https://slvis1.ne.netscout.com/
Username:
NE186
Password:
Vafaseyu2!
⚠ Please ensure you read each step carefully before performing the required task in
the order described.
1. Connecting to Sightline
Username: NE186
Password: Vafaseyu2!
2 Once logged On, the My Sightline page should be displayed. Take a look at the
information displayed and answer the following question. What content if any is
https://cx.netscout.com/lab/462/EN 1/4
25/01/2023 12:12 Netscout University - Lab "First Steps"
3 Select the (+) Add Module button and modify your page as you wish. These
settings will only affect your user login account.
4 By using the top menu, browse to the page System > Status > Appliance
Status and answer the following questions:
5 You need to find the software version used on this deployment. Click on the
[+] icon next to the listed appliances to obtain more information.
Can you find the Sightline version used on the Leader
appliance?
6 By using the top menu, browse to the page System > Status > Routers to review
this deploymentand answer the following questions:
https://cx.netscout.com/lab/462/EN 2/4
25/01/2023 12:12 Netscout University - Lab "First Steps"
7
Finished Browse to the page Reports > Network > Dashboard. Then move to the tab called
Traffic.
Which BGP origin ASN sends most of the traffic into
this monitored network?
Which is the second highest utilized peer that you
exchange traffic with?
8 As flows received by Sightline don’t include any BGP information, how was Sightline
able to build these ASN graphs?
To illustrate, we will search the BGP information available on Sightline for an IP
address belonging to Google: 64.233.160.1
Using the menu and go to the page Explore > Routing > IPv4 Routing
Table
Under Filter 1, select less-specific-prefix and enter the value: 64.233.160.1
Click on Update
Check Solution
Well Done
You can click on the button below to report back to the trainer.
https://cx.netscout.com/lab/462/EN 3/4
25/01/2023 12:12 Netscout University - Lab "First Steps"
Finished
How would you rate this lab:
Tell us what do you think of this lab, and how it could be improved ?
Save
If you would like a copy of this lab select either the Print or the Save Page As
(Control-S) menu options from your browser’s dropdown menu. Need Help
https://cx.netscout.com/lab/462/EN 4/4