Printed Pages : 3 Subject Code : EEC404

Paper Id 131225 Roll No.

BTECH
(SEM-IV ) THEORY EXAMINATION 2018-19
SIGNALS AND SYSTEMS
Time : 3 Hours Max. Marks : 100

Note : Be precise in your answer. In case of numerical problem assume data wherever not
provided

SECTION – A

1. Attempt any five parts of the following questions: 5×4=20

(a) Explain Time variance and static properties of a system.
(b) Write the condition for existence of DTFT.
(c) What is relationship between Fourier Transform and Laplace Transform?
www.aktuonline.com

(d) Find even and odd part of signal x (t) = 𝑒 u (t).

(e) Determine whether or not signal x (t) = cos sin is periodic .if periodic find

its fundamental period.

(f) Determine whether or not signal x (t) = cos (t+1) x (t) is causal and time variant.

SECTION B
2. Attempt any three parts of the following questions: 3×10=30

(a) When the input to an LTI system is 𝑥 (𝑛) = ( ) 𝑢(𝑛) + 2 𝑢(−𝑛 + 1) and the

corresponding 𝑦(𝑛) = 5. ( ) 𝑢 (𝑛) − 5. ( ) 𝑢(𝑛).

(i) Find the function H(z) of the system and its ROC.
(ii) Find the impulse response h(n) of the system.
(b) Find the continuous time Fourier transform of the Gate/Rectangular signal. Also plot
its magnitude response.
(c) Given 𝑥 (𝑡) = 5 𝑐𝑜𝑠 𝑡, 𝑦(𝑡) = 2 𝑒 , find the convolution of x(t) and y(t) using
Fourier transform.

http://www.aktuonline.com
 Printed Pages : 3 Subject Code : EEC404

( )
(d) A signal x (t) has the Laplace Transform X(s) = . Find the Laplace
( )
Transform of the following signal y (t) = x (2t - 1 ) u (2t -1).
(e) Determine the Z-Transform of following sequences with ROC

(i) x(n) = ;0≤n≤6

x(n) = 0 otherwise
(ii) x(n) = 𝑛 u(n) + nu(n)

SECTION C

3. Attempt any one parts of the following : 1×10=10

(a) (i) Determine the step response of the system described by difference
equation y (n) + 4y(n-1) + 4y(n-2) = x(n).
(ii) Find the response of the time invariant system with impulse
www.aktuonline.com

response h(n) = (1 , 2 , 1 , -1) to an input signal x(n) = ( 1 , 2 , 3 , 1)

by using Z-Transform.
(b) Suppose that x(t) = 𝑒 ( )
u(t-2) and h(t) is shown in Figure 1. Verify the
convolution property for this pair.

h(t)

-1 0 2 t

Figure 1

4. Attempt any one parts of the following : 1×10=10

(a) If 𝑋 (𝑠) = find x(t) for

( )( )

i). System is stable

ii). System is causal
iii). System is non causal

http://www.aktuonline.com
 Printed Pages : 3 Subject Code : EEC404

(b) For the discrete time system 𝑦(𝑛) = 𝑥(−𝑛 + 2) and𝑦(𝑛) = 𝑥(𝑛) + 𝑛. 𝑥(𝑛 + 1),
check whether the system is static or dynamic, linear or non-linear, shift invariant or
shift varying, causal or non-causal.
5. Attempt any one parts of the following : 1×10=10
(a) Determine the total response of the differential equation
𝑑 𝑦(𝑡) 𝑑𝑦(𝑡)
+3 + 2𝑦(𝑡) = 𝑥(𝑡)
𝑑𝑡 𝑑𝑡

Where y(0)=3, y’(0)=4, x(t)=4e-2t and t ≥ 0.

(b) Compute the Fourier transform of the following signals:
(1) 𝑥(𝑛) = 2 𝑢(−𝑛)
(2) 𝑥(𝑛) = ( ) 𝑢(𝑛 + 4).
www.aktuonline.com

6. Attempt any one parts of the following : 1×10=10

(a) Determine the inverse Z-transform using partial fraction method for
1
( )𝑧
𝑋(𝑧) = 4
1 1
1− 𝑧 1− 𝑧
2 4
(1) |𝑧| (2) |𝑧| (3) |𝑧|

(b) Given the relationship 𝑦(𝑡) = 𝑥(𝑡) ∗ ℎ(𝑡) and 𝑔(𝑡) = 𝑥(3𝑡) ∗ ℎ(3𝑡), and given that
X(t) has Fourier transform X(jω) and h(t) has Fourier transform H(jω). Use Fourier
transform properties to show that g(t) has the form 𝑔(𝑡) = 𝐴𝑦(𝐵𝑡). Determine the
value of A & B.
7. Attempt any one parts of the following : 1×10=10
(a) Compute the DTFT of 𝑥(𝑛) = (𝑏 sin 𝜔 𝑛) 𝑢(𝑛); 𝑏 1.
(b) (i) Determine output response of system h(n) = (1,0,1,0) for input x(n) = (1,2,3,4).
(ii) Give and explain the relation between S-plane and Z-plane.

http://www.aktuonline.com