Scribd
Upload
33 views

Lab02 Assignment&manul

The document verifies Thevenin's and Norton's theorems through circuit analysis and calculations. It also analyzes nodal analysis techniques and maximum power transfer in another circuit. Key steps and results are shown for both circuits.

Uploaded by

Mohamed Alahmady
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
33 views

Lab02 Assignment&manul

The document verifies Thevenin's and Norton's theorems through circuit analysis and calculations. It also analyzes nodal analysis techniques and maximum power transfer in another circuit. Key steps and results are shown for both circuits.

Uploaded by

Mohamed Alahmady
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

CND 101 - LAB [Handwritten Assignments 1]

Student name: Mohamed Khaled Alahmady


Student ID: v23010489
Thevenin’s and Norton’s theorems verification:
• Verify Thevenin and Norten Theorems
i. Vth

ii. IN

iii. Actual
iv. Thevenin Equivalent

v. Norton Equivalent

V across 𝑅𝐿 I in 𝑅𝑙
Original cct. 1.875𝑣 937.5µ
Thevenin's equivalent 1.875𝑣 937.5µ
Norton’s equivalent 1.875𝑣 937.5µ
• Nodal Analysis Techniques:
Vs1 Vs2 R1 R2 R3 R4 RL
Value 13v 5v 1.4k 2.9k 6.5k 9.5k 2.6k

𝑉1 𝑉2 𝑉𝐿
Calculated 8.6962552𝑣 13𝑣 5𝑣
Measured 8.696𝑣 13𝑣 5𝑣
Δ% −2.93𝑚% 0% 0%

𝐼1 𝐼2 𝐼3 𝐼4 𝐼𝑠1 𝐼𝑠2 𝐼𝐿
Calculated −2𝑚𝐴 1.484𝑚𝐴 568.654µ𝐴 915.395284µ𝐴 −3.48404993𝑚𝐴 2.56865465𝑚𝐴 2𝑚𝐴
Measured −2𝑚𝐴 1.484𝑚𝐴 568.7µ𝐴 915.4µ𝐴 −3.484𝑚𝐴 2.569𝑚𝐴 2𝑚𝐴
Δ% 0% 0% 8𝑚% 0.515𝑚% −1.415𝑚% 13𝑚% 0%

𝑃𝑉𝑠1 𝑃𝑉𝑠1 ∑ 𝑃𝑉𝑠𝑗


Calculated 45.2926𝑚𝑊 −12.84327325𝑚𝑊 32.44932675𝑚𝑊
Measured 45.292𝑚𝑊 −12.845𝑚𝑊 32.447𝑚𝑊
Δ% −1.324𝑚% 13.44𝑚% −7.17𝑚%

𝑃𝑅1 𝑃𝑅2 𝑃𝑅3 𝑃𝑅4 𝑃𝑅𝐿 ∑ 𝑃𝑅𝑗


Calculated 5.6𝑚𝑊 6.3865424𝑚𝑊2.1020572𝑚𝑊7.960776096𝑚𝑊 10.4𝑚𝑊 32.4493757𝑚𝑊
Measured 5.6𝑚 6.387𝑚 2.102𝑚 7.961𝑚 10.4𝑚 32.45𝑚
Δ% 0% 28.848𝑚% 2.7211𝑚% 2.81259𝑚% 0% 1.9239𝑚%
∑ 𝑃𝑉𝑠𝑗 ∑ 𝑃𝑅𝑗 %𝑂𝑢𝑡 𝑜𝑓 𝑏𝑎𝑙𝑎𝑛𝑐𝑒

Calculated 32.44932675𝑚𝑊 32.4493757𝑚𝑊 0.07𝑚%


Measured 32.447𝑚𝑊 32.45𝑚 4.62𝑚%

===================================================================================

Vs1 Vs2 R1 R2 R3 R4 RL
Value 13v 5v 2.4k 5.1k 8k 16k 3.6k

Same Previous Tables with different values, so no need to write them.


• Maximum Power Transfer Verification
Q: Did the maximum power transfer to the load when 𝑅𝐿 was equal to 𝑅𝑡ℎ ?
- Yes, max power occurs at 𝑅𝐿 = 𝑅𝑡ℎ = 6𝑘Ω

𝑅_𝐿 1𝑘 2𝑘 3𝑘 4𝑘 5𝑘 6𝑘 7𝑘 8𝑘 9𝑘 10𝑘
𝑃_𝑅𝐿 1.16𝑚𝑊 1.753𝑚𝑊 2.083𝑚𝑊 2.25𝑚𝑊 2.324𝑚𝑊 2.344𝑚𝑊 2.33𝑚𝑊 2.296𝑚𝑊 2.25𝑚𝑊 2.197𝑚𝑊

Assignment 2
- 𝑉𝑡ℎ = 73.6 − (−10) = 83.6𝑣
- 𝐼𝑁 = 5.6𝑚𝐴

𝑉𝑡ℎ
- 𝑅𝑡ℎ = = 16.2015 𝑘Ω
𝐼𝑡ℎ

- Actual Circuit

- Thevenin Circuit
- Norton Circuit

- Max Power
i. Occurs at 𝑅𝐿 = 𝑅𝑡ℎ = 16.2𝑘Ω

You might also like