Scribd
Upload
41 views

Double Monochromator

The document describes a double monochromator series from TriVista that offers high flexibility and unique capabilities for light research applications. It has two precision monochromators in series that can operate in additive or subtractive mode, and interchangeable triple grating turrets for flexibility.

Uploaded by

Tuấn Minh Phùng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views

Double Monochromator

The document describes a double monochromator series from TriVista that offers high flexibility and unique capabilities for light research applications. It has two precision monochromators in series that can operate in additive or subtractive mode, and interchangeable triple grating turrets for flexibility.

Uploaded by

Tuấn Minh Phùng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TriVista DM

Double Monochromator Series


Imaging Corrected Optics
Additive and Subtractive Dispersion
Interchangeable Triple Grating Turrets
High Flexibilty

0 20 40 60 80 100 120
-1
Raman Shift [rel. cm ]
TriVista DM
Double Monochromator Series

TriVista DM-Series Double Monochromators


Based on the highly successful SpectraPro® direct digital scanning monochromators and spectrographs, DM-Series
Double Monochromators offer unique capabilities for light research applications. They include two precision
SpectraPro monochromators used in series where the exit slit of the first monochromator stage is the entrance slit to
the second monochromator stage. The systems are able to work in an additive mode for increased dispersion and
exceptional stray light rejection and in subtractive mode to work as a tuneable bandpass filter. As a pre monochro-
mator at a TriVista Raman System the DM-55i and DM-77i has an excelent stray light rejection in subtractive mode.
Both stages are mounted to a rigid, common baseplate for exceptional stability.

System Diagram DM-33i


Triple Indexable Gratings
DM-Series double monochromators feature inter-
changeable triple grating turrets, allowing up to three
gratings to be installed at the same time and selected by
computer control. The operational range can be
increased by selecting gratings with different groove fre-
quencies. System throughput can be maximized by
selecting gratings with blaze efficiencies matched to the
specific wavelength region of interest.
Accessories, Gratings and System Solutions
S&I offers a complete selection of accessories for DM Double or Single Monochromator Operation
double monochromators, including light sources, detec-
DM-Series instruments can be operated as precision
tors, fiber optic probes, and sample chambers.
double monochromators or as independent high perfor-
Hundreds of different gratings are also available to help
mance single monochromators.
optimize each instrument for specific applications.

Additive and Subtractive Dispersion


DM-Series instruments can be simply switched by software selection between additive and subtractive Dispersion.

In additive mode the second stage re-disperses In subtractive mode the first and second stages
the light, increasing spectral dispersion while work as a tuneable bandpass filter to allow only the
further reducing stray light levels. desired portion of spectrum to pass through.

Spectroscopy & Imaging GmbH


Boerdestr. 1 www.s-and-i.eu phone +49-(0)2925-9768666
59581 Warstein [email protected] fax +49-(0)2925-9768675
Germany
TriVista DM
Double Monochromator Series

Specifications (With 1200grooves/mm Gratings)


Focal Lengths:
Model DM-33i: 2 X 300mm
Model DM-55i: 2 X 500mm
Model DM-77i: 2 X 750mm

Optical Systems:
Additive and Subtractive Double Czerny-Turner.
Imaging corrected optical systems for high throughput and multi-source input capabilities.

Scan Systems and Control:


Computer controlled direct digital scanning through USB 2.0

Entrance/Exit Slit Positions:


180° straight-through optical path is standard. 90°, or 90° + 180° optical paths optionally available.

Wavelength Range:
Mechanical Scanning Range: 0 to 1200 nm.
Operational Range: 200 nm to 1200 nm.
System throughput depends on gratings selected.
Total Operating Range: Deep UV to Infrared with selection of available gratings.

Stray Light Rejection:


10-9 or better

Aperture Ratios:
DM-33i: f/4
DM-55i: f/6.5
DM-77i: f/9.7

Drive Step Size:


0.0025nm (nom.)

Wavelength Reproducibility:
± 0.025 nm or better

Resolution (FWHM):
DM-33i: 0.05 nm
DM-55i: 0.03 nm
DM/77i: 0.02 nm

Reciprocal Linear Dispersion (nom.):


Note: Specifications are subject to change, February 2016

DM-33i: 1.35 nm/mm


DM-55i: 0.85 nm/mm
DM-77i: 0.55 nm/mm

Slit Assemblies:
Standard:
Entrance and exit slits are bilaterally adjustable via micrometer control from 10µm to 3mm. The intermediate
slit between the 2 stages is adjustable by computer control from 10µm to12mm In 1µm increments.
Option 1: Motorized bilateral entrance and exit slits adjustable by computer control from 10µm to 3mm.
Option 2: Motorized bilateral entrance and exit slits adjustable by computer control from 10µm to 12mm.

Specifications with 1200 grooves/mm holographic grating.


Resolution specified at 435.8 nm with 10µm wide x 4mm high slits.
Gratings other than 1200 grooves/mm will change resolution, dispersion and operating range.

Spectroscopy & Imaging GmbH


Boerdestr. 1 www.s-and-i.eu phone +49-(0)2925-9768666
59581 Warstein [email protected] fax +49-(0)2925-9768675
Germany

You might also like