Scribd
Upload
33 views5 pages

Part A Final Lalit

The document describes a micro project proposal on the superposition theorem. The proposal outlines the benefits of studying the theorem, which allows analyzing circuits with multiple voltage or current sources by considering each source individually. It lists course outcomes addressed, the proposed methodology of applying the theorem to a circuit, and an action plan with tasks and team member responsibilities.

Uploaded by

digi mitra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
33 views5 pages

Part A Final Lalit

The document describes a micro project proposal on the superposition theorem. The proposal outlines the benefits of studying the theorem, which allows analyzing circuits with multiple voltage or current sources by considering each source individually. It lists course outcomes addressed, the proposed methodology of applying the theorem to a circuit, and an action plan with tasks and team member responsibilities.

Uploaded by

digi mitra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

GOVERNMENT POLYTECHNIC GONDIA


(1242)

Department Of Electronics and


Telecommunication Engineering
Micro Project Proposal
On

“ SUPERPOSITION THEOREM ”
Prepared By
Enrollment No. Name
2212420286 LALIT SAHARE
2212420321 TANISHK HATEKAR
2212420315 ARJUN PACHE
2212420298 KUNAL THAKRE

Under the Guidance of


Mr .R. M. Devtare sir

Submitted To

Maharashtra State Board of Technical Education,


Mumbai (Autonomous) (ISO-9001-2008) (ISO/IEC
27001:2013)

1
Annexure – I

PART A – Micro-Project Proposal

“SUPERPOSITION THEOREM”

1.0 Benefits of the Micro-Project

Superposition theorem states that in any linear, bilateral network where more
than one source is present, the response across any element in the circuit is the sum of
the responses obtained from each source considered separately. In contrast, all other
sources are replaced by their internal resistance.

Aim of the Micro-Project

The superposition theorem is a circuit analysis theorem used to solve the network
where two or more sources are present and connected.. In any linear and bilateral
network or circuit having multiple independent sources, the response of an element
will be equal to the algebraic sum of the responses of that element by considering one
source at a time. To calculate the individual contribution of each source in a circuit, the
other source must be replaced or removed without affecting the final result. This is
done by replacing the voltage source with a short circuit. While removing a voltage
source, its value is set to zero. When removing a current source, its value is set to
infinite. This is done by replacing the current source with an open circuit.

2.0 Course Outcomes Addressed

 Use the Principle of Circuit analysis to check the functionality.


 Determine the Current through given branch & Voltage across the given element
Of circuit by applying Superposition theorem.

2
3.0 Proposed Methodology

 The first step is to select one among the multiple sources present in the
bilateral network. Among the various sources in the circuit, any one of the
sources can be considered first.
 Except for the selected source, all the sources must be replaced by their
internal impedance.
 Using a network simplification approach, evaluate the current flowing
through or the voltage drop across a particular element in the network.
 The same considering a single source is repeated for all the other sources in
the circuit.
 Upon obtaining the respective response for individual source, perform the
summation of all responses to get the overall voltage drop or current
through the circuit element.

4.0 Action Plan

S. Details of activity Planned Planned Name of Responsible


No Start Finish Team Members
date date
1 Starting the Micro Project LALIT SAHARE
TANISHK HATEKAR
ARJUN PACHE
KUNAL THAKRE
2 We Collect the Data On Type Of ARJUN PACHE
Survey KUNAL THAKRE
3 Planning Layout of Micro- LALIT SAHARE
Project TANISHK HATEKAR

4 To Study the Passive TANISHK HATEKAR


Components and Collect ARJUN PACHE
Manufactural Specification.
5 Prepared Final Micro project LALIT SAHARE
Report KUNAL THAKRE

3
5.0 Resources Required

S. No. Name of Specifications Qty Remarks


Resource/material
1 Tech Knowledge Book ECN 1 Per batch

2 Internet Wikipedia 1 Per batch

 Name of Team Member With Sign.

Enrollment Name Sign


No.

LALIT SAHARE
2212420286

2212 TANISHK HATEKAR


420321

22124203 ARJUN PACHE


15

22124202 KUNAL THAKRE


98

**********************************

Thank You

4
5

You might also like