EBM55 Spec1v00
EBM55 Spec1v00
ETHER ELECTRONICS
Product Features:
Bluetooth Spec. V2.0+EDR Compliant Class 2 type Output Power Support Firmware Upgrade USB 1.1 and UART Host Interface Multi-Configurable I2S, PCM or SPDIF Interface Integrated Battery Charger Integrated Microphone bias Integrated LED Driver Built in 16-bit Stereo Codec- 95dB SNR for DAC Factory configurable to either 1.8V or 3.3V supply. Supports up to 32Mbits of External Flash Memory (16Mbits Typical Requirement) Enhanced Audibility and Noise Cancellation Support for 802.11 Co-existence Size: 21mm x 13.5 mm x 2.35mm Weight: TBD
Bluetooth-Qualified
CSR, BC57E687C
EBM55
April 2011
Product Description:
The EMB55 Module is a Class 2 Bluetooth sub-system using BlueCore5-Multimedia External chipset from leading Bluetooth chipset supplier Cambridge Silicon Radio. EMB55 Module interfaces to 8Mbit of external Flash memory When used with the CSR Bluetooth software stack, it provides a fully compliant Bluetooth system to v2.0+EDR of the specification for data and voice communications The module and device firmware is fully compliant with the Bluetooth specification v2.0+EDR
Applications:
Hands-free Car Kit Stereo Headset AV Headphones Echo Cancellation High Performance Mono Headsets Analogue and USB Multimedia Dongles Wireless Speakers
Document History
Revision 1.00 Date 18 NOV 10 Change reason Original publication of this documents
Table 1
ETHER DIGITAL http://www.etherdigital.com.cn 86-755-29112920 -1Copy right 2010, ETHER ELECTRONICS
EBM55
ETHER ELECTRONICS
Order Information
Type number EBM55 Description External antenna Without Firmware External antenna EBM55-XXXX Firmware version XXXX Contact sales for more detail XXXX Version 1.0
Table 2
Specifications:
Operating Frequency Band Bluetooth Specification Output Power Class Operating Voltage Host Interface Audio Interface Flash Memory Size Dimension 2.4GHz ~ 2.48GHz unlicensed ISM band V2.0+EDR Class 2 1.8V / 3.3V USB 1.1 or UART PCM, I2S, SPDIF 16Mbits, supports up to 32Mbits 21mm (L) x 13.5 (W) mm x 2.35mm (H)
Table 3
Electrical Characteristics
Absolute Maximum Rating Storage Temperature Supply Voltage, (VDD_CHG)
Min Max
-40C -0.3V
+85C +6.5V
Recommended Operating Conditions Operating Temperature Range Supply Voltage, (VDD_BAT) Supply Voltage, (VDD_CHG)
Min
Max
Power Consumption SCO Connection HV3 (30ms interval sniff mode) SCO Connection HV1 ACL Data Transfer 115.2Kbps UART no traffic(Master) ACL Data Transfer 115.2Kbps UART no traffic(Slave) ACL Data Transfer 721Kbps USB Standby
ETHER DIGITAL http://www.etherdigital.com.cn 86-755-29112920 -2-
Units mA mA mA mA mA mA
Average
EBM55
CODEC Microphone inputs and ADC/channel DAC and loudspeaker driver, no signal/channel Digital audio processing subsystem VDD_BAT = 4.2V; f = 2.45GHz; T=20C mA mA mA
ETHER ELECTRONICS
Table 4
RF Characteristics
Receiver Sensitivity at 0.1% BER Maximum Receiver Signal C/I Co-Channel Adjacent Channel Selectivity C/I 1MHz 2nd Adjacent Channel Selectivity C/I 2MHz 3rd Adjacent Channel Selectivity C/I >3MHz Image Rejection C/I VDD_BAT = 4.2V; f = 2.45GHz; T=20C Units dBm dBm dB dB dB dB dB Min Typ Max Bluetooth Spec -70 -20 11 0 -30 -40 -9
Table 5
Transmitter RF Output Power RF Power Control Range RF Power Range Control Resolution 20dB Bandwidth for Modulated Carrier 2nd Adjacent Channel Power (+/- 2MHz) 3rd Adjacent Channel Power (+/- 3MHz) VDD_BAT = 4.2V; f = 2.45GHz; T=20C Units dBm dB dB KHz dBc dBc Min Typ Max Bluetooth Spec -6 to +4 > 16 <1000 -20 -40
3.0
Table 6
Pin Configurations:
PIN NO. 1 2 3 4 5 6 7 8 9 10 AIO1 AIO0 RESET GND PIO9 PIO10 PIO11 PIO12 PIO13 PIO14 Bi-directional Bi-directional CMOS input with weak internal pull-up GND Bi-directional Bi-directional Bi-directional Bi-directional Bi-directional Bi-directional Programmable input/output line Programmable input/output line Reset if low. Input debounced so must be low for >5ms to cause a reset Ground Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line
-3Copy right 2010, ETHER ELECTRONICS
NAME
TYPE
FUNCTION
RE-MARK
EBM55
11 12 13 PIO15 GND VDD _IO VDD _IO 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 VDD_USB VDD_1.8V_O UT GND USB_DP USB_DN UART_RTS UART_CTS UART_RX UART_TX PCM_IN PCM_SYNC PCM_CLK PCM_OUT SPI_CSB SPI_MISO SPI_CLK SPI_MOSI VRE_IN VDD_BAT GND Bi-directional Bi-directional CMOS Output CMOS Input CMOS Input CMOS Output CMOS Input Bi-directional Bi-directional CMOS Output CMOS Input CMOS Output CMOS Input CMOS Input Analogue Battery terminal +ve Ground USB Data Plus USB Data Minus UART Request To Send (Active Low) UART Clear To Send (Active Low) UART Data Input (Active High) UART Data Output (Active High) Synchronous Data Input Synchronous Data Sync Synchronous Data Clock Synchronous Data Output Bi-directional GND Power Power Power Power Programmable Input/Output Line Ground +3.3V Supply Connect to Pin15 (VDD_1.8V_OUT) Positive supply for UART/USB ports +1.8V Supply Output
ETHER ELECTRONICS
Chip Select For Synchronous Serial Interface (Active Low) Serial Peripheral Interface Data Output Serial Peripheral Interface Clock Serial Peripheral Interface Data Input Take high to enable switch-mode regulator Lithium ion/polymer battery positive terminal. Battery charger output and input to switchmode regulator
33 34 35 36 37 38 39 40 41 42 43 44 45 46
GND VDD_CHG LED1 LED0 GND SPK_L_N SPK_L_P SPK_R_N SPK_R_P GND _S MIC_BIAS MIC_B_P MIC_B_N MIC_A_P
GND Charger input Open drain output Open drain output GND Analogue Analogue Analogue Analogue GND Analogue Analogue Analogue Analogue
Ground Lithium ion/polymer battery charger input LED Driver LED Driver Ground Speaker output negative, left Speaker output positive, left Speaker output negative, right Speaker output positive, right Audio Ground Microphone bias Microphone input positive, right Microphone input negative, right Microphone input positive, left
-4Copy right 2010, ETHER ELECTRONICS
EBM55
47 48 49 50 51 52 53 54 55 56 57 58 59 60 MIC_A_N GND PIO0 PIO1 PIO2 PIO3 GND RF-IN GND PIO4 PIO5 PIO6 PIO7 PIO8 Analogue GND Bi-directional Bi-directional Bi-directional Bi-directional GND RF GND Bi-directional Bi-directional Bi-directional Bi-directional Bi-directional Microphone input negative, left Ground Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Ground RF Interface Ground Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line
ETHER ELECTRONICS
Table 7
Document References
References Specifications of the Bluetooth System BlueCore5-Multimedia External Product Data Sheet Version V2.0+EDR, 04 November 2004 CS-101568-DSP4 Table 8
21.00 48 49 31 30
13.50
60 1 18
19
Top view
Bottom view
1.02
0.60
2.00
1.14 1.86
Pin dimension
ETHER DIGITAL http://www.etherdigital.com.cn 86-755-29112920 -5-
Side view
Copy right 2010, ETHER ELECTRONICS