Ordering Number: EP94E

DVD-ROM/R/RW and
CD-ROM/R/RW Devices
'05-01

TOKYO OFFICE
Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Telephone: 81-(0)3-3837-6339, 6340, 6342, Facsimile: 81-(0)3-3837-6377

●SANYO Electric Co.,Ltd. Semiconductor Company Homepage

URL: http://www.semic.sanyo.co.jp/index_e.htm

This catalog provides information as of January, 2005.

Specifications and information herein are subject to change without notice.

Printed in Japan / January 2005 3k OTE

Y
CONTENTS

es,
DVD-ROM/R/RW and CD-ROM/R/RW Devices

Best Solution

02 Chip Set Solutions:

Collections of SANYO’s Perfected Technologies

04 SANYO Technologies Underpinning DVD-ROM/R/RW

and CD-ROM/R/RW Drive Development

Chipsets

06 DVD-Dual System Chipsets

we have
Devices

08 Single-Chip DVD-Dual System ICs

that Support ATAPI (IDE)

Chipsets

10 CD-R/RW System Chipsets

SANYO has the Technology and Devices Required Devices

by DVD -ROM/R/RW and CD-ROM/R/RW Products 52× Playback, 52× Write

12 CD-R/RW Encoder and Decoder ICs

SANYO has developed DVD-Dual system-on-chip ICs that integrate Chipsets

DVD-ROM decoder and DVD-R/RW encoder on the same chip based
16 CD-ROM System Chipsets
on SANYO technologies refined through extensive experience
developing CD-ROM and CD-R/RW ICs. Devices

SANYO is committed to early support of the latest recording Decoder ICs for 48× ATAPI (IDE)
18 CD-ROM Drives
technologies, such as its and DVD-R/RW
Decoder ICs for 40× ATAPI (IDE)
technologies, to assist our customers development of their optical disc 20 CD-ROM Drives

products.
21 Front-End Processors

22 32-Bit RISC Microcontrollers

LC67 Series

24 8-Bit Flash Microcontrollers

LC87 Series

26 Flash Microcontrollers
with On-Chip USB Interface Engine

28 PC-Related Motor Driver ICs

14

15

■ Any and all SANYO products described or contained herein do not have equipment. To verify symptoms and states that cannot be evaluated in an ■ No part of this publication may be reproduced or transmitted in any form or by any Notes on Package Types and Naming
specifications that can handle applications that require extremely high levels of independent device, the customer should always evaluate and test devices mounted means, electronic or mechanical, including photocopying and recording, or any The package names used in this documentation are designed to indicate rough classification of the
packages used, and do not necessarily indicate the formal name of each individual package.
reliability, such as life-support systems, aircraft's control systems, or other in the customer's products or equipment. information storage or retrieval system, or otherwise, without the prior written Refer to the delivery specifications document for the particular product for the package dimensions
applications whose failure can be reasonably expected to result in serious physical permission of SANYO Electric Co., Ltd. figure and the formal name of the package.
■ SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products.
and/or material damage. Consult with your SANYO representative nearest you
However, any and all semiconductor products fail with some probability. It is ■ Any and all information described or contained herein are subject to change without
before using any SANYO products described or contained herein in such A separate manufacturing license based on the DVD standards is required when creating a new DVD
possible that these probabilistic failures could give rise to accidents or events that notice due to product/technology improvement, etc. When designing equipment, system product.
applications.
could endanger human lives, that could give rise to smoke or fire, or that could refer to the “Delivery Specification” for the SANYO product that you intend to use.
■ SANYO assumes no responsibility for equipment failures that result from using cause damage to other property. When designing equipment, adopt safety Flash products are licensed from Silicon Storage Technology, Inc., (USA), and manufactured and
■ Information (including circuit diagrams and circuit parameters) herein is for example
products at values that exceed, even momentarily, rated values (such as maximum measures so that these kinds of accidents or events cannot occur. Such measures sold by SANYO Electric Co., Ltd.
only ; it is not guaranteed for volume production. SANYO believes information herein
ratings, operating condition ranges, or other parameters) listed in products include but are not limited to protective circuits and error prevention circuits for safe
is accurate and reliable, but no guarantees are made or implied regarding its use or
specifications of any and all SANYO products described or contained herein. design, redundant design, and structural design.
any infringements of intellectual property rights or other rights of third parties. , , and are trademarks or registered trademarks of
■ Specifications of any and all SANYO products described or contained herein ■ In the event that any or all SANYO products(including technical data, services) SANYO Electric Co., Ltd.
stipulate the performance, characteristics, and functions of the described products in described or contained herein are controlled under any of applicable local export stands for Proof against Buffer UnderRuN Error, not for proof against burning.
the independent state, and are not guarantees of the performance, characteristics, control laws and regulations, such products must not be exported without obtaining
and functions of the described products as mounted in the customer's products or the export license from the authorities concerned in accordance with the above law.
 BS est
Innovative spirit giving birth to new trends

Chip Set Solutions:

Collections of SANYO’s Perfected Technologies
Optical disc drives have flourished with the growth of multimedia. This explosive growth has brought with
it demand for increased performance, new functionality, and greater ease of use. SANYO responds with
chip set solutions consisting of all the necessary devices based on the company’s unique technology.
olution
Extensive Lineup to Support User Needs P.28

Single-Chip Solutions that Support P.06 Motor Driver ICs

DVD-ROM and DVD±R/RW
Offering custom-specification products
DVD-Dual System ICs tailored to users’ needs
SANYO provides an extensive lineup of ICs that include ● High-output, high-gain actuator drivers
SANYO DSP cores and servo firmware to flexibly support ● Loading motor drivers using low-saturation vertical PNP
DVD, CD-ROM, and CD-R/RW media. ● Spindle motor drivers providing precise rotation
● Spindle and actuator drivers integrated on a single chip
DVD-Dual ICs
DVD±R/RW: 12× write speed, DVD-ROM 16× playback
CD-R/RW/ROM: 48×/32×/48× speeds
LC897491 P.08

DVD±R/RW: 16× write speed, 16× DVD-ROM playback Large-Capacity On-Chip Flash Memory
CD-R/RW/ROM: 52×/32×/52× speeds P.24

LC897492 P.08 Flash Microcontrollers

The on-board programming and software data storage
functions give these microcontrollers a degree of flexibility that
is unthinkable with mask ROM microcontrollers.

8-bit flash microcontroller

Built-in 128 Kbytes of flash EEPROM
Includes SANYO's BURN-Proof Technology P.12
High-Speed Playback and Write
LC87F5JC8A P.24
CD-R/RW Encoder & Decoder
Built-in 128 Kbytes of flash EEPROM
All necessary functions for CD-R/RW drive integrated
on a single chip to achieve the system simplification
● Support for high-speed reads and writes
LC87F5CC8A P.24

● Broad host interface support

● Built-in intelligent functions LC87F5DC8A P.24

Complete compatibility with ATAPI standards

32-bit RISC Microcontroller
52× playback and 52× writes
On-chip 512 Kbytes flash EEPROM
LC898095 P.12
LC67F5104A P.22

Chipset
Solutions
Built-in USB interface 8-bit flash microcontroller
On-chip 128 Kbytes flash EEPROM
LC87F16C8A
On-chip 128 Kbytes flash EEPROM

LC87F10C8A
P.27

P.27

Flash products are licensed from Silicon Storage Technology, Inc., (USA), and manufactured and sold by SANYO Electric Co., Ltd.

02 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 03

 BS est
SANYO’s ASSP differentiation in both multi-function and performance

SANYO Technologies Underpinning DVD-ROM/R/RW

and CD-ROM/R/RW Drive Development
Functionality and performance of optical disc drives are improved by acceleration technology, recording
control technology by the write strategy circuit and ATIP circuits, and by digital servo technology.
Integration levels are increasing even further due to even higher precision fabrication technologies, and
olution
continuing research for the development of optical disc drives including DVDs, such as enhancing the
variety of different host interface functions.

Constituent Technologies

Single-Chip Solutions Moving Choice of

Optical Disc Drives Forward Higher Integration Host Interface
Based upon the CD-ROM decoders achieved by the unique advanced technology,
SANYO has developed ICs supporting a full complement of host interfaces. At the
same time, it developed chipset solutions combining such functions as CD
decoders, servo ICs, and the encoders required for writable versions of CD/CD- ● Promoting ● ATAPI
ROM technology. single-chip solutions
Now that the industry is shifting to DVD-ROM, we continue to answer the need for ● SCSI
● CD-ROM decoder
streamlined optical disc drive designs with single-chip solutions building upon + host interface ● USB
these core optical disc drive technologies and using precision fabrication of such + CD/CD-ROM encoder
ASIC macros as memory, analog-to-digital converters, digital-to-analog converters, + DVD-ROM decoder
and phased locked loops. + DVD encoder
+ CD decoder

Boosting the Functionality and

Performance of Optical Disc Drives Recording
Control Technology
Higher rotational speeds
●SANYO digital signal processing technology now offers realtime error
correction for playback speeds high.
●SANYO servo technology provides precision control over disc speed. ● Write strategy circuits
● ATIP circuits
Recording control
●SANYO has boosted the performance of the ATIP servo, write strategy
circuit, and other components of the recording control system.

Host interfaces
●SANYO is promoting improved transfer speeds at the same time as
supporting diversifying host interfaces.
Higher Rotational
Speeds Servo Technology
Large-capacity on-chip flash memory
●Includes an even larger flash memory system to support the
increasingly complex firmware required for combo drive.
● CD-ROM playback : 52× speed ● Automatic adjustment
● CD-R/RW writing : 52× speed
● Faster access
● DVD recording
SANYO is applying these advances to enhancing the
functionality and performance of DVD-ROM drives as well.

04 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 05

 Chip
Responding to Diversifying Optical Disc Drive Product Concepts

DVD-Dual System Chipsets

SANYO has now developed DVD-Dual ICs that integrate on a single chip both SANYO's unique CD
technologies refined through extensive experience with dedicated CD-ROM and CD-R/RW ICs as well as
DVD-ROM decoder and DVD-R/RW encoder functions.
These ICs support our customers' optical disc drive development efforts.
Sets
DVD-ROM/R/RW Drive System

16 to 64 Mbits DDRAM/
Disc SDRAM SDRAM

Analog interface
Mechanism
Video out

Pickup DVD-ROM/R/RW A/D and Audio out

SF-DB10 (H/H) encoder/decoder ATAPI (IDE) interface DVD AC3/MPEG2 D/A converters
RF analog
LC897491 audio/video stream audio/video
SF-DB20 (Slim) front end encoder/decoder
LC897492 encoder/ Video in
Laser drivers
8 Mbits FLASH decoder
P.8
Audio in

BD
Actuator

k
Sled motor Drivers P.28 to P.29

lociagram
Motor For slim applications (notebook PCs) (5 V systems) XTAL XTAL
Dedicated spindle driver LV8280T 33 MHz
System ICs 4ch LV8210W
5ch LV8211T
Spindle motor 6ch LV8212T
Motor For half-height drives (desktop PCs) (12 V systems)
Dedicated spindle drivers LB11995H
LB11680H
System ICs 6ch LV8232M
Loading motor LV8233M
Motor 7ch LV8230M
LV8231M
Micro- IEEE1394 Digital audio/
BTL 4ch LA6541NH Flash ROM
controller UDF2.0 video interface
LA6548NH
5ch LA6565
Tilt LA6566
driver
6ch LA6261
LA6590
Flash products are licensed from Silicon Storage Technology, Inc., (USA), and manufactured and sold by SANYO Electric Co., Ltd.

and are registered trademarks of SANYO Electric Co., Ltd.

stands for Proof against Buffer UnderRuN Error, not for proof against burning.

06 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 07

 D
Single-Chip DVD-ROM and DVD±R/RW Solutions

Single-Chip DVD-Dual System ICs

that Support ATAPI (IDE)
evices
Demand from the rapidly expanding DVD market for a shift to DVD-Dual, which promises more stable operation and
higher recording speeds, is increasing. To respond to these needs, SANYO has now developed the LC897491 12×-
speed DVD-Dual drive signal-processing IC. SANYO is also now developing the LC897492, which will feature 16×
speed. These products incorporate 8 Mbits of flash memory, and require no external flash memory. Since either of
these products in conjunction with an RF amplifier can implement all of the signal processing unique to DVD-Dual
drives with just two chips, they can support significant simplification of end product designs.

DVD-Dual System ICs that provide 8 Mbits of built-in flash memory

and support DVD-ROM/±R/RW and CD-R/RW
LC897491/LC897492 Block Diagram
LC897491
LC897492 Diff RF
signals
SLC
CD/DVD DVD
DVD Input-Write
DRAM address/data
arbiter bus
shared with CD-R
Memory interface
Jitter read read data Buffering
ReadChan write to
DVD Record and Playback Functions Meas channel
DVD IF
EFM+Demod memory
read Clk Block DVD mode
CAPA
CAPA address arbiter
● DVD-ROM playback at up to 16× speed ● Supports the T/40 write strategy resolution 16 Mbits

controller
SDRAM
DVD RAM Demod & Dec pointer
timings Frame Sync Sector/ (or 64 Mbits)
ID Unbuffering
● DVD±R/RW recording: Up to 12× speed (LC897491) ● 2K/32K/0 link support (DVD-R/RW) Fe,TE,FG
detection/ block ECC read from
SDRAM
D Servo protection ID reg dec memory CD mode
Up to 16× speed (LC897492) ● Lossless linking support (DVD+R/RW) CPU and arbiter
motor CTLs
● DVD-ROM clock generation PLL (read channel) ● Blank area detection function (unrecorded area detection) Defect Blk/Set Rdy IRQ
● DVD-ROM playback ECC/EDC decoder and bit ● Recording can be started from arbitrary positions in 1 BCA in
Servo EFM to
descrambler clock cycle units referenced to LPP/data. Clock CD-R/RW BCA
IDE bus
decoder BCAIRQ Host ATAPI Host
XTAl
● DVD±R/RW wobble and LPP recording clock generation ● Encoded data arbitrary position setting function in 1 clock 33.8688 MHz Master DVD ECC(PI/PO)
I/F Interface

Write data to Media

PLL cycle units referenced to LPP/data. Clock PLL Master
clock
encoder/

Sector/frame
Master decoder

Offset address
Blank/data
● DVD±R/RW ECC/EDC encoder and bit scrambler ● BCA read
clock Gen
CPU
IRQs
CD-R/RW clock CSS
● DVD-R/RW LPP decoder (prerecorded data read) ● DVD multiblock transfer and reception functions
Write Clock PLL
DVD Bit scrambler
CD/DVD &
● DVD+R/RW ADIP decoder (prerecorded data read) ● CSS support, bus scrambler, DVD-MAC (used by CPRM)
Write Chan write DVD EDC From SLC
clock Gen channel encoder/decoder
DVD wobble clock Digital From CD-R/RW
● DVD±R/RW header (ID, CPR_MAI) generation and zero ● 2×-speed DVD-ROM reading
DVD+/-R/RW
Wobble+LPP jitter write clock PLL
DVD LPP LPP/PDIP meter
padding functions PLL IRQ
D servo
Blank DVD ID generator
Sector/ &
detection
-R/RW Lpp frame Encoder zero padding
CD-R/RW Demod & Dec IRQ Menory
CD wobble copy/fill
ATIP Demod Write timing
CD Record and Playback Functions & decoder +R/RW ADIP generator
Demod & Dec Page Reg
● CD-R/RW/ROM: 48×/32×/48× speeds (LC897491) ● Support for CD-R high-density recording technology Defect list search
52×/32×/52× speeds (LC897492) (HD-BURN) ATIP Address to CD-R/RW Endec
EFM+
CPU Direct
Memory Access IRQ
data DVD EFM+
● CD-ROM data and subcode data encoding and decoding CD

L
Selector
modulator

CD audio DAC
CD/DVD-R/RW audio
CD-R/RW output
● BURN-Proof technology Smpl pulses
CRC/ROPC
write strategy
+ROPC timing Write strategy
Wait EFM
CDR CIRC+CDROM
generator IRQs IRQs
Write data logic Endec
● CD analog audio output and digital audio output EFM data

C
laser CTL Megacell
delay unit
interfaces
● Batch transfer and multiblock transfer and reception
Endec/servo
functions Serial I/O A/D I/O Port 4*Timer SRAM 80251 CPU core
register bus
● Supports the T/32 write strategy resolution
Flash ROM

897491 B
Shared Functions

lockDiagram
● ATAP PIO: 16.6 MB/s, multiword DMA: 16.6 MB/s, Ultra ● Crystal oscillator: 33.8688 MHz
DMA: 33 MB/s and 66 MB/s ● Package: LQFP256
● Up to 128 Mbits of external SDRAM ● Power supply: I/O: 3.3 V, internal: 2.5 V
● Internal flash memory: 8 Mbits
● On-chip CPU

and are registered trademarks of SANYO Electric Co., Ltd.

stands for Proof against Buffer UnderRuN Error, not for proof against burning.

08 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 09

 Chip
SANYO responds to diversifying product concepts for optical disc drives.

CD-R/RW System Chipsets

Chip sets that achieve significant simplifications in the recoding system by

providing ATIP decoding and CLV servo functions and a write strategy circuit.
Sets
Memory

Disc

Mechanism CD-R/RW system core block

Pickup Front-end
Feed motor Spindle motor ATAPI (IDE) interface
SF-W36 processor
Codec

B
PC

Optimized

lock
recording L
Drivers P.28 to P.29
For slim applications (notebook PCs) (5 V systems) R
Dedicated spindle driver LV8280T
System ICs 4ch LV8210W

Diagram
CD-Mech. control
5ch LV8211T
1-chip flash microcontrollers Digital servo
6ch LV8212T
P.24
For half-height drives (desktop PCs) (12 V systems)
LC87F5JC8A
Dedicated spindle drivers LB11995H
LB11680H LC87F5CC8A
System ICs 6ch LV8232M LC87F5DC8A
LV8233M
LV8230M Flash
7ch 32-bit RISC microcontroller CPU
LV8231M memory
P.22
BTL 4ch LA6541NH LC67F5104A
LA6548NH
5ch LA6565 LC898095 P.12
LA6566
6ch LA6261
LA6590
Flash products are licensed from Silicon Storage Technology, Inc., (USA), and manufactured and sold by SANYO Electric Co., Ltd.

is a registered trademark of SANYO Electric Co., Ltd.

stands for Proof against Buffer UnderRuN Error, not for proof against burning.

10 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 11

 D
Includes SANYO's BURN-Proof® Technology –– High-Speed Playback and Write Performance

52× Playback, 52× Write

CD-R/RW Encoder and Decoder ICs
evices
ICs that achieve significant simplifications in CD-R/RW drives by integrating all the functions required for
write operations, including ATIP servo functions, digital servo functions, an ATAPI interface circuit, on a
single chip.

ATAPI Interface 52× Playback,

52× Write CD-R/RW Encoder and Decoder IC

BD
LC898095 LC898095
RAM
Functions
●CD-ROM decoding and encoding functions
●CD decoding and encoding functions
●Subcode decoding and encoding functions
●ATIP demodulating/decoding functions *12
Write
strategy
&
Link-position
Data bus[0:7] Data bus[0:15] Address bus[0:21]

lock
*10
●Pit and wobble CLV servo functions ●Write strategy function (CD-R/RW) ATIPSYNC ATIP/CLV servo

●ATAPI interface (includes the register block)

●CAV-audio function
●BURN-Proof technology
●CAV recording functions
*1 Digital
servo
Sub-code I/F
de-interleave/interleave
iagram
& Address generator
●CD-TEXT support ●Buffer RAM mapping function *2 CIRC
EnDec Sub-code ECC
●Built-in CPU(80251) ●Package: LQFP256
Address generator

CAV-Audio *13
DAC
Features
●ECC and EDC correction/addition for CD-ROM data ●Multiblock transfer function (Function which automatically CD-DSP I/F De-scramble &
buffering
●Decoding and encoding for subcode data sends multiple blocks at once.) & SYNC
detector Address generator
●Servo control implemented in a digital servo system ● The flash ROM access time can be changed with
configuration settings. Each block
ECC & EDC bus control
●CLV/CAV servo control using ATIP data
●Register-based CPU that features registers that can be Address generator signal
●ATIP decoding function and CRC check function accessed in byte, word, and double-word units.
*3
●A random EFM signal can be output for PCA use. ● Source code compatible with the Intel 8051, full HOST *4 IDE I/F Block Bus *8
*5 arbiter External
compatibility with the Intel 80251. based HISIDE
●A high-precision write strategy signal can be output & *9 buffer
(supports 52×-speed CD-R and 24×-speed CD-RW) DRAM DRAM
●High-speed instruction fetch using 16-bit fetch, page
controller
● Buffer RAM can be accessed by the built-in mode fetch, and prefetch operations. Data output input I/F
microcontroller through the LC898095. Address generator
●General-purpose 7-input 8-bit A/D converter and 6-input
●Built-in ATAPI interface (with Ultra DMA modes 0, 1, and 8-bit D/A converter Microcontroller

LC898095
2 support) PLL & RAM access
●General-purpose I/O ports (24 ports) and LED drive ports XTALCK0
clock Address generator
●Supports 52×-speed decoding and 52×-speed encoding (2 ports) XTAL0 generator
(Operating frequency 33.8688 MHz) ●Provides a pin for command connection with the AFE
(This pin is also used for general-purpose serial data Each block
●Transfer rates: Up to 16.6 MB/s whenPIO mode used Microcontroller TEST0-4
(with IORDY), up to 33 MB/s when Ultra DMA used (with transfer.)
DMARQ). ●Supports stepping motors.
●CD main channel, C2 flag and subcode areas within
external buffer RAM can arbitrarily be set by the user.
●Batch transfer function (Function which sends CD main
*1 DSLB(PN96) to FR(PN123), AD0(PN127) to SPDO(PN142), *7 D0 to D7
channel, C2 flag, subcode, etc. all at once.) *8 IO0 to IO15
SHOCK(PN147) to PCK2(PN155)
*2 SUBSYNC *9 RA0 to RA9, RAS0, RAS1, RAS2, CAS0, CAS1, OE, UWE, LWE
*3 DD0 to DD15, DASP, PDIAG *10 WOBBLE, BIDATA, BICLK
*4 CS1FX, CS3FX, DA0 to DA2, DIOR, DIOW, DMACK *12 WRITE, SSP2/1, RAPC, WAPC, H11T0, LDH, TEST2/1, WDAT,
*5 DMARQ, HINTRQ, IOCS16, IORDY NWDAT, EFMG
*6 RD, WR, SUA0 to SUA7, CS *13 LOUT, ROUT

is a registered trademark of SANYO Electric Co., Ltd.

stands for Proof against Buffer UnderRuN Error, not for proof against burning.

12 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 13

 D
SANYO CD-R/RW Recording Technology

BURN-Proof and HD-BURN evices

High-Density CD-R Recording Technology

SANYO, the world-leader in high-speed recording CD-R/RW products, has developed a revolutionary
technology that solves the problem of buffer underrun errors during CD-R/RW recording. This technology HD-BURN is a high-density recording technology that allows 1.4 GB, twice the normal capacity, to
eliminates the previously intractable problem of write failures due to buffer underrun errors, and enables CD-R be stored on a single CD-R media. Discs created with the HD-BURN technology are highly
writes to be executed with complete dependability. compatible with existing DVD player technology, and can be read on most players simply by
Industry standardization of this technology is moving ahead, and it will be coming into wide use under the updating the firmware. HD-BURN technology, which responds to needs for greater flexibility and
name BURN (Buffer Under Run)-Proof. lower priced data recording, show great promise as a supplementary function for CD-R and DVD
recording systems.
In order to create a CD-DA/CD-ROM compatible disc, the CD-R must record receive data continuously on the
disc. If data transfer is interrupted for some reason, a buffer underrun error will occur, and the resulting disc will
not be readable by a CD-ROM drive.
The minimum pit length is reduced.
To 0.62 µm (from the earlier 0.83 µm in CDs)

Modulation efficiency is improved

Writes data at
twice the density
Accident Buffer New data Recovery
to CD-R/RW
underrun acquisition
Error correction efficiency is improved media.
Why do buffer underrun errors occur?
Because data transfer from the host PC is not
Recording uniform.
halt Retrace
processing If data transfer rate is slower than the recording
speed, as in the following cases, a buffer underrun
error will occur during recording. Comparison Minimum pit length Error correction code allocation
●When other application software is started
Write data Synchronization ●When a read error occurs on the data source CD-R media
storage processing
side
0.83 µm

Recording CD-R media recorded

Data waiting end with HD-BURN
PAUSE detection
SANYO Electric's Proposal 0.62 µm Data
Even if data transfer is temporarily interrupted Error correction code
(when a buffer underrun error occurs), recording
Recording can be carried out with no seam between the end
restart of the preceding data and the beginning of the
following data. Features of the HD-BURN Technology
1. Records twice the amount of data on standard commercial CD-R media.
2. Uses the CLV recording technique. In HD-BURN mode, the player writes at up to 36× speed (relative to
Features of BURN-Proof Function
normal speed CD-ROM), and reads at up to 80× speed.
1. A recording error does not occur, and data is guaranteed, in the event of a buffer underrun error
3. This IC includes the BURN-Proof function (see page 15) and prevents write errors due to buffer underrun.
2. CD-R recording is easily possible regardless of the personal computer environment
4. Includes DVD video format authoring functions, including file conversion from the DV format.
3. Multitasking can be carried out during CD-R/RW recording
5. Can write data to commercial CD-RW media at a CD-ROM speed of 24× in HD-BURN mode.
4. Failures of disc direct back-up from a CD-ROM drive to a CD-RW drive are greatly reduced
*: The HD-BURN function operates with the following CD-R writing application software: "B's GOLD" (BHA
Corporation) and "Nero" (Ahead Software).
, , and are registered trademarks of SANYO Electric Co., Ltd.
stands for Proof against Buffer UnderRuN Error, not for proof against burning.

14 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 15

 Chip
SANYO responds to diversifying product concepts for optical disc drives.

CD-ROM System Chipsets

Complete conformity to ATAPI-related standards. We have achieved high-speed CAV control

CD-ROM.
Sets

Mechanism
Disc

Pickup
Front-end
processors
CD-ROM system core block

ATAPI (IDE) interface

digital servo, ECC, 1M DRAM,
B lock
Diagram
L
LA9239T and microcontroller
Feed motor Spindle motor SF-P151N
LA9246T LC895330 P.18
SF-P151N1 R
LA9247T
P.21

Digital Servo
Flash
&
memory
CD-DSP

8-bit
Drivers P.28 to P.29 RISC
For slim applications (notebook PCs) (5 V systems) micro- 1M DRAM
Dedicated spindle driver LV8280T controller Memory
System ICs 4ch LV8210W CD-Mech. Control 4M DRAM
5ch LV8211T 1-chip flash microcontrollers
6ch LV8212T
P.24
For half-height drives (desktop PCs) (12 V systems)
Dedicated spindle drivers LB11995H LC87F5JC8A
ATAPI(IDE) I/F
LB11680H LC87F5CC8A CD-ROM decoder ATAPI(IDE) interface
System ICs 6ch LV8232M LC87F5DC8A P.20
LV8233M
7ch LV8230M LC895199K PC
LV8231M 32-bit RISC microcontroller
BTL 4ch LA6541NH P.22
LA6548NH LC67F5104A
5ch LA6565
LA6566
6ch LA6261
LA6590
Flash memory products are licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by SANYO Electoric Co., Ltd.

16 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 17

 D
High-Speed Readout and Data Transfer

Decoder ICs for 48× ATAPI (IDE)

CD-ROM Drives
evices
Only SANYO, the first to commercialize ICs combining CD-ROM decoding and error correction
functions, offers such a broad lineup covering so many needs.

48× ATAPI (IDE) CD-ROM Decoder and CD-DSP IC with Built-in

B
Digital Servo and Microcontroller

LC895330
CD-DSP block
lock Diagram
●48× complete CAV possible ●Muting function that provides both zero-cross muting and Driver
●Frame synchronization signals are detected, protected soft muting. TDO, FDO
and interpolated, ensuring stable data readout. ●lndependent digital attenuators for the left and right SLDO, SPDO FG LC895330
●EFM signal is demodulated and converted to 8-bit symbol channels (8-bit precision). This attenuator function DRAM
data. provides both direct attenuation and soft attenuation. Data bus[0:7] Data bus[0:15] Address bus[0:18]

●After subcode Q signal is subjected to a CRC check, it is ●Bilingual support VCEC Sub-code I/F
*11 de-interleave
PLL
output to microprocessor via parallel I/O. ●Digital audio interface that supports both CLV and CAV
Address generator
●Performs the unscrambling and deinterleaving operations playback.
*1
that reorder the demodulated EFM signal to the stipulated ●Digital de-emphasis LA9239 *12
CD-DSP Sub-code ECC
order. ●8× oversampling and digital filtering *2
Address generator
●Detection, correction and flag processing of error signals ●Digital to analog converter (PWM output) *14
(C1: dual, C2: quadruple) *3 SRAM
Audio
●C2 flag is set after comparing C1 flag and C2 check circuit De-scramble &
FGCNT Buffering
results, and signal interpolation and muting is carried out
CD-DSP I/F Address generator
by the C2 flag. ZRESET Each block
& SYNC Bus control
Detector signal
ECC & EDC
CD-ROM decoder, ATAPI (IDE) I/F block HOST Merge Address generator
Bus
●ATAPI (IDE) interface ●CAV-audio function Arbiter
EXT10 CMDI Buffer
*4 &
DRAM
●1-Mbit EDO-DRAM ●Subcode P-W buffering function (No-ECC) and CD-TEXT ATAPI DRAM
*5
●CD main channel, C2 flag and subcode areas within on- support I/F controller
*6
chip buffer DRAM can arbitrarily be set by the user. ●Ultra DMA MODE 2, MODE 1, MODE 0 support
Each block Clock
●Batch transfer function (Function which sends CD main register *13
Data output input I/F generator
channel, C2 flag, subcode, etc. all at once.) Timer Decoder
Address generator XTALCK
●Multiblock transfer function (Function which automatically
*7
sends multiple blocks at once.) Each block XTAL

L89533
SW1 Microcontroller
Interrupt RAM access *10
SW2 controller
SW3 Micro- *8 Address generator *9

C
EXT11 controller
Microcontroller block ZOEZWEZOE
●Intel 8051 equivalent microcontroller ●Performs 16-bit calculations. 128K
FGCNT CMDI D0 to D7 EEPROM
●The built-in Intel 8051 equivalent core is, on average, ●Timer 0.1 circuits IOPORT 1.5K RAM
eight times faster than the original Intel 8051. ●Program download function for external flash memory 0 to 14 A0 to A16

*1 EFMIN, EFMIN2, PH, BH, FE, TE, TES, RREC *8 D0 to D7

*2 *9

0
RHLD, TSH, EQS, GHS, LDON, FBAL, TBAL, CRCERR/FLOCK, HFLO/WRQ/DIR/TLOCK, FSEQ,
●Package: LQFP176 TOFST, SGC FSX/LRCK/FV, EFLG/CK2/PRF, C2F/PCK, EFMOUT
*3 LOUT, ROUT, DOUT *10 TEST0 to TEST2
*4 DD0 to DD15, ZDASP, ZPDIAG *11 PCKISTF, PCKIFTP, PDO, POS1 to POS3, FR
*5 ZCS 1FX, ZCS 3FX, DA0 to DA2, ZDIOR, ZDIOW, *12 SLCO0 to SLCO3, JITC, DSLB, PHC, BHC
ZDMACK, ZHRST, CSEL *13 PLL1
*6 DMARQ, HINTRQ, ZIOCS16, IORDY *14 SLCIT1 to SLCIT2, AD1, VREF, CSS
*7 ZRD, ZWR, ZCS, MCK, SUA0 to SUA7

18 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 19

 D
High-Speed Readout and Data Transfer

Decoder ICs for 40× ATAPI (IDE)

CD-ROM Drives
evices
Only SANYO, the first to commercialize ICs combining CD-ROM decoding and error correction
functions, offers such a broad lineup covering so many needs.

Decoder IC for 40× ATAPI (IDE) CD-ROM Drives Front-End Processors

LC895199K LA9239T
Functions
LA9246T

LC 895199K
●CD-ROM ECC functions ●ATAPI(IDE) interface (register block and other
●Subcode reading functions components)
●CAV audio playback function
LA9247T
Features
Features ●RF amplifier (with AGC) ●TE amplifier (built-in VCA for balance adjustment)
●ATAPI (IDE) interface ●CD main channel, C2 flag and subcode areas within ●RF gain amplifier (supporting CD-RW disc playback) ●Servo signal VCA circuit
●40× capable EDO-DRAM (×16, 50 ns) used external buffer RAM can arbitrarily be set by the user.
●RF equalizer (7 modes) ●APC circuit (includes a laser power switching function)
16.6 Mbytes/s (with IORDY) ●Batch transfer function (Function which sends CD main
●RF hold function ●Sleep function
Operating frequency 33.8688 MHz channel, C2 flag, subcode, etc. all at once.)
●40× capable EDO-DRAM (×16, 35 ns) used ●Multiblock transfer function (Function which automatically
●PH/BH detection ●Supply voltage: 5 V, 3.3V (only for LA9247T)
16.6 Mbytes/s (without IORDY) sends multiple blocks at once.) ●FE amplifier (built-in VCA for balance adjustment) ●Package: TSSOP36
Operating frequency 33.8688 MHz
●24× capable EDO-DRAM (×16, 50 ns) used ●CAV-audio function
16.6 Mbytes/s (without IORDY) ●Subcode P-W buffering function (No-ECC) and CD-TEXT
Operating frequency 33.8688 MHz support LA9247T
●1 Mbits to 4 Mbits of DRAM can be connected as external
buffer RAM. ●Ultra DMA MODE 2, MODE 1, MODE 0 support
PH/BH
●Package: SQFP144
RF-AGC RF-EQ

CD-DSP
*1

EXCK
Data bus[0:7]
Sub-code I/F
RAM

10byte FIFO for SubQ

Address generator

CAV-audio control
Address generator
LC895199K
Data bus[0:15] Address bus[0:17]

*10
DAC
Pickup
CSS
amplifier

BAL-GUP
REFL VCA

FE VCA
REFL
amplifier

FE amplifier
DSP BD lock
iagram
BD
CD-DSP I/F De-scramble &
*2
& SYNC buffering
detector Address generator

lock
BAL-GUP TE VCA TE amplifier
Each block
bus control
ECC & EDC signal
ZRESET
Reset Address generator
controller
ZRSTCPU
HOST
*3
*4
*5

ZINT0
Each block
register
IDE I/F **1
based HISIDE
Bus
arbiter
&
DRAM
controller
*8
*9
External
buffer
DRAM
iagram APC

ZINT1 R0-R127 Data output input I/F

*6 Decoder
Micro-
controller *7
Address generator CD-ROM digital servo IC Series
*1 WFCK, SBSO, SCOR *7 D0 to D7
ZSWAIT Microcontroller
*2 BCK, SDATA, LRCK, C2PO *8 IO0 to IO15 Type number Recommended supply voltage Package DSP-I/F Pick-I/F CD-ROM speed
Each block RAM access
XTALCK Clock *3 DD0 to DD15, ZDASP, ZPDIAG *9 RA0 to RA8, ZRAS0, ZCAS0, ZOE, ZUWE, ZLWE
generator
Address generator LA9239T 5V TSSOP36 5V 5 V (A + C), (B + D) 48×
XTAL *4 ZCS1FX, ZCS3FX, DA0 to 2, ZDIOR, ZDIOW, *10 DBCK, DLRCK, DSDATA
& PLL
MCK3 ZDMACK, CSEL *11 IOP0 to IOP7 LA9246T 5V TSSOP36 5V 5 V (A + B + C + D) 48×
MCK *5 DMARQ, HINTRQ, ZIOCS16, IORDY, ZHRST **1 HISIDE(WD25C32) is made by WESTERN
*11
*6 ZRD, ZWR, SUA0 to 6, ZCS, CSCTRL DIGITAL. LA9247T 5 V, 3.3 V TSSOP36 3.3 V 5 V (A + B + C + D) 52×

20 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 21

 D
Large-Capacity Integrated Flash Memory

32-Bit RISC Microcontrollers evices

These microcontrollers achieve performance and functionality improvements in optical disc drives with
recording technologies such as acceleration technologies and write strategy and ATIP circuits as well as
digital servo technologies. Furthermore, finer design rules mean that SANYO's system on chip and system
IC technologies are evolving even further.
SANYO is committed to continuing to invest in R&D to support further developments in DVD and other
optical disc drives

Large On-chip Flash EEPROM Capacity

Block Diagram
LC67
LC67 Series
Overview Main block Peripheral block

Watchdog timer
The LC67 Series products are multi-function high-speed The LC67 Series are particularly well suited for control of

Multiple timers
EXTnIRQ

Basic timer
(n:0 to 5)
single-chip 32-bit CMOS microcontrollers based on the PC peripherals, such as CD-R/RW and hard disk drives

HPIRQ
External bus DMA

UART
ARM7TDMI de facto industry standard CPU core. They

DMA

ADC
since they integrate, on the same chip, a wide range of interface controller controller

CSI
Multiple timers
feature large memory capacities of up to 4 Mbits of on-chip peripheral functions, including DMA controller, interrupt
Multiple timer 0
flash ROM and 128 Kbits of SRAM. These microcontrollers controller, serial interface, UART, 8-bit A/D converter, multi- 1 6 2 1 1 15 1 2 1 Multiple timer 1
allocate the last 16 KB of flash ROM as a dedicated boot function timer, watchdog timer, and power saving functions.
Plain timers Multiple timer 2
area to allow on-board downloading of data and code even They also provide an external memory space consisting of
Basic timer Multiple timer 3
when mounted in an end product. four independent 16 MB areas. Chip select can be applied Interrupt controller Watchdog timer Multiple timer 4

Target Applications Using

to each of these areas for independent control. 32-bit
RISC core
ARM7TDMI Peripheral system bus

Bus

LC67 Series
bridge
System manager Ports Serial interface
Main system bus A/D converter
Reset controller Port 0 Clocked serial
Port 1 interface
Oscillation system
Power save Port 2
Internal Internal RAM controller Port 3
flash ROM (16 Kbytes)
(512 Kbytes) Port 4
Port 5

Facsimile Digital Audio

Industry-standard Thumb
DSC CD-R/RW Printer core instruction set

LC67 Series
LC67F5106A LC67F5104A
Package TQFP100
Operating supply voltage Internal: 2.5 V, I/O, A/D converter: 3.3 V
Wide range of Simplified
Flash ROM 6 Mbits 4 Mbits third-party system
SRAM 256 Kbits 128 Kbits products structures
Maximum operating speed 18 MHz
Number of I/O pins 68 I/O pins, 8 input pins Development Environment
Number of interrupts External: 7, internal: 23 ●Flash writer: Ando AF-9708
Timers 16 bits × 5 channels (multifunction timer), 16 bits × 1 channel (basic timer) ●Emulator: Yokogawa Digital Computer Corporation ADVICE (PW920)
SIO One channel Sofia Systems Co., Ltd. UniSTAC
UART One channel
A/D converter Eight-channel 8-bit A/D converter
DMAC Two channels
Power saving function Sleep and standby modes and ARM7TDMI are the registered trademarks of ARM Limited.
The LC67 series products include flash memory technology licensed from Silicon Storage Technology, Inc. (USA).

22 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 23

 D
Large-Capacity Integrated Flash Memory

8-Bit Flash Microcontrollers evices

SANYO’s LC87 Series of 8-bit microcontrollers features a rich instruction set. A high-speed parallel
interface, serial I/O with automatic transfer, and high-speed computation make the LC87 microcontrollers
ideal for CD-ROM/R/RW drives and similar embedded control applications. The flash memory versions
support onboard rewriting of memory contents, providing flexibility that helps shorten development times
for application systems.

Built-in: 256 Kbytes of Flash EEPROM

LC87 Series LC87F5CC8A

Overview Choice of synchronous or asynchronous settings Onboard programming
Bus mode (Supports the IIC bus format.) Software controlled programming
The LC87 Series products are multifunction high-speed 8- The LC875 Series consists of single-chip microcontrollers 12×8-bit A/D converter 4 Kbytes of RAM
Asynchronous: UART 5 V single-voltage power supply programming
bit single-chip CMOS microcontrollers that provide a rich set with a broad range of the functionality necessary for real- Automatic serial data communication Programming in 128-byte units
of multiply and divide and 16-bit access instructions. They time equipment control systems: high speed CPU core, 3-channel SIO 128 KB flash memory
are based on the LC87 core, which features a 256K ROM, RAM, parallel interface, 8-bit analog-to-digital
LC87
core
program ROM space. The flash memory versions support converter, 16-bit timer/counters with input capture, 16-bit Parallel interface 9-channel timer
Capture function
Access to external memory and devices:
on-board rewriting of memory contents, providing flexibility timer/counters configurable for PWM output, clock timers, External pulse counter function
• Automatic CS, RD, and WR generation
that helps shorten development times for application watchdog timers, two 8-bit serial I/O channels with • Multiplexed and non-multiplexed modes System clock divider High-speed clock counter PWM output function
Toggle output function
systems. automatic transfer functions, asynchronous/synchronous • Three sets of chip select signals Built-in prescaler
serial I/O, 12-bit PWM, I/O ports, rich types of interrupt, and
standby modes of operation.
Operating suply Features
ROM RAM Delivery
Type Number voltage range Ports Interrupt Maximum A/D
[bits] [bits] VDD [V] Serial I/O format
Internal External number of timers converter
Features
* LC875J48C 48K × 8
●16 to 256 Kbytes of ROM ●Broad interrupt support Synchronus:
56K × 8 8 bits × 8
– 21 interrupt sources (7 external + 14 internal) and 10 * LC875J56C 2048 × 9 Two 8-bit channels with QFP64
●1024 to 8192 bytes of RAM 2.5 to 5.5 55 14 7 automatic transter support For realtime 8 bits × 11
TQFP64
vectors (LC87F52C8A) clock × 1
* LC875J64C 64K × 8 Asyncronous/syncronous:
●8-bit analog-to-digital converters with 12 channels – 3-level multiplexed interrupt support Two 8-bit channels
128K × 8 4096 × 9
● 16-bit timer/counter 0 with input capture and four ●Standby modes: HALT, HOLD, and clock HOLD * LC87F5JC8A (Flash)
operating modes LC875D48C 48K × 8
●High-speed operation *
Mode 0: Two 8-bit timers with 8-bit programmable
prescalers – Minimum cycle time: 0.3 µs (bus cycle 0.1 µs) * LC875D56C 56K × 8 2048 × 9

Mode 1: 8-bit timer with 8-bit programmable prescaler – Bit manipulation instruction cycle for registers and
* LC875D64C 64K × 8
plus 8-bit counter RAM: 0.3 µs Synchronus:
Two 8-bit channels with 8 bits × 8 QFP80
LC875D72B 72K × 8 automatic transter support For realtime 8 bits × 15 (14 × 14)
Mode 2: 16-bit timer with 8-bit programmable prescaler ●Highly orthogonal instruction set (LC87 Series) * 2.5 to 5.5 71 14 8
(14 × 20)
Asyncronous/syncronous: clock × 1
Mode 3: 16-bit counter – Powerful multiply/divide instructions: 24 × 16, 24/16, 16 * LC875D80B 80K × 8 Three 8-bit channels TQFP80

× 8, 16/8 4096 × 9
●16-bit timer/counter 1 with four operating modes LC875D96B 96K × 8
Mode 0: 8-bit timer plus 8-bit timer/counter – Additional 16-bit instructions *
Mode 1: Two 8-bit PWM outputs 128K × 8
●Support for additional ROM * LC87F5DC8A (Flash)
Mode 2: 16-bit timer/counter – The LC87 core supports up to 256 Kbytes of program ✩ LC875BH4A 176K × 8
Mode 3: 16-bit timer with PWM output from lower ROM, 64 Kbytes of RAM for calculations and stack, Synchronus:
8 bits ✩ LC875BJ0A 192K × 8 Three 8-bit channels with 8 bits × 8
and 16 Mbytes for data memory. 4096 × 9 2.5 to 6.0 89 19 7 automatic transter support For realtime 8 bits × 12
QFP100
TQFP100
●Four 8-bit timers with 6-bit programmable prescalers ●On-board programming ✩ LC875BM2A 224K × 8
Asyncronous/syncronous:
Two 8-bit channels
clock × 1

●14-bit clock timer – The flash ROM versions in the LC87 Series permit with bus support
✩ LC875BP4A 256K × 8
rewriting of the on-board ROM with a single power
●Watchdog timer (requires external RC circuit) * LC875C48C 48K × 8
supply even after the chip has been mounted on the
●Two 8-bit serial I/O channels with automatic transfer

LC87
circuit board. * LC875C56C 56K × 8 2048 × 9
function for up to 32 bytes
– Two 8-bit baud rate generators * LC875C64C 64K × 8 Synchronus:
Two 8-bit channels with 8 bits × 8 QFP100
– Maximum clock of 4/3 tCYC automatic transter support For realtime 8 bits × 15
* LC875C72B 72K × 8 2.5 to 5.5 89 14 8 TQFP100
Asyncronous/syncronous: clock × 1
●One 8-bit synchronous/asynchronous SIO channel Three 8-bit channels
* LC875C80B 80K × 8
– Asynchronous clock: 8 to 2048 tCYC 4096 × 9
– Synchronous clock: 2 to 512 tCYC *: The products presented in this section are representative * LC875C96B 96K × 8

●Two 12-bit PWM outputs examples. 128K × 8

* LC87F5CC8A (Flash)
●Remote control receive circuit For further details, refer to SANYO's microcontroller ✩: New product *: Under development
catalogs and the data sheets for the individual products.
Flash memory products are licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by SANYO Electric Co.,Ltd.

24 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 25

 D
Large-capacity Flash Memory and Conformance with the USB 1.1 Standard

Flash Microcontrollers
with On-Chip USB Interface Engine
evices
These microcontrollers feature the ability to reload software while installed in the end product by
downloading over a USB interface using SANYO’s flash memory onboard programming system and a USB
interface that conforms to version 1.1 of the USB standard. These microcontrollers also provide on-chip
USB regulator and system clock PLL circuits for reduced parts counts in end products.

Overview
USB Version 1.1 Compliant 128 Kbytes Flash Microcontroller
The LC87 series are a line of products that feature an on- programming, self-programming in 128-byte units, USB port
chip USB interface engine.
● Full-speed models: LC87F10C8A, LC87F16C8A
voltage 3.3 V regulator circuit, large-capacity FIFO, and
other features.
LC87F16C8A
This series includes models that feature onboard ●The LC87F10C8A features on-chip debugger support Features
●ROM: 131,072 × 8 bits (flash memory) ●USB: 9 endpoints
●RAM: 8,192 × 9 bits ●Instruction execution time: 250 ns (at 12 MHz)
Features ● Timers: Two 16-bit (each usable as two 8-bit) ●12-channel A/D converter
programmable timers, four 8-bit programmable timers, ●Watchdog timer
●Built-in USB interface engine ●Built-in PWM ports (2 to 4 ports) one base timer.
● Built-in flash program ROM allows programs to be ●One or two powerful 16-bit timer circuits that can be used ●Noise exclusion circuit for remote control signal reception
●I/O: 50 pins (excluding the PWM outputs and filter ports)
reloaded. as two 8-bit timers. ●Interrupts: 29 sources, 10 vector locations

L
●PWM ports: Two 12-bit PWM + one 16-bit PWM (usable

F
●Programs can be updated from a personal computer using ●Clock counter divider (uses an external 32 kHz crystal as two 8-bit PWM) outputs. ●Supply voltage (oprerating range): 2.7 to 5.5 V.

C
the USB interface. oscillator)

A
*: Control is shared with the timer control. ●Packages: SQFP64, QFP64
●Extensive lineup including the LC87F1XXX and LC8715 ●Powerful 10-level interrupt function supports 29 sources
Series full-speed versions
● The USB data area (FIFO buffer) is mapped to the
microcontroller RAM area.
●Minimum instruction execution time: 250 ns (at 12MHz)
●High-speed multiply and divide instructions: For example,
a 16 bit × 8 bit multiply takes 5 tCYC.
●Noise rejection circuit for remote control signal reception
●Watchdog timer (uses an external RC circuit)
87 16C8
●12-channel 8-bit A/D converter

Operating suply Other functions

ROM RAM Ports Delivery
Type number
[bits] [bits]
voltage range
Pins
Interrupt
Serial I/O
Maximum
number of
A/D Endpoints
format
USB Version 1.1 Compliant 128 Kbytes Flash Microcontroller
VDD [V] Internal External converter
timers

128K × 8
Synchronus:
8-bit channel × 2 with
automatic transter support 8 bits × 8
QFP48
LC87F10C8A
✩ LC87F16C8A 8192 × 9 2.7 to 3.6 39 Asyncronous/syncronous: 9
(Flash) SQFP48
8-bit channel × 1 with bus Features
support 8 bits × 8
22 9
Synchronus:
For realtime
clock × 1
●ROM: 131,072 × 8 bits (flash memory) ●Instruction execution time: 250 ns (at 12 MHz)
8-bit channel × 3 with
128K × 8
✩ LC87F10C8A
(Flash)
8192 × 9 2.7 to 3.6 55 automatic transter support
Asyncronous/syncronous: 8 bits × 8 9
QFP64
SQFP64
●RAM: 8,192 × 9 bits ● SIO:4 channels (synchronus: three 8-bit channels,
8-bit channel × 1 with bus asynchronus/synchronus: one 8-bit channel)
support ● Timers: Two 16-bit (each usable as two 8-bit)
✩: New product programmable timers, four 8-bit programmable timers, ●12-channel A/D converter
one base timer. ●Watchdog timer
● I/O: 55 pins (excluding the PWM outputs and filter ●Noise rejection circuit for remote control signal reception
ports)(usable as two 8-bit PWM)
*:Control is shared with the timer control ●Supply voltage (operating range): 2.7 to 3.6V.

L F
●PWM ports: Two 12-bit PWM + one 16-bit PWM ●Packages: TQFP64, QFP64

C
●USB: 9 endpoints

*: The products presented in this section are representative examples.

For further details, refer to SANYO's microcontroller catalogs and the data sheets for the individual products.
87 10C8A
Flash memory products are licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by SANYO Electric Co., Ltd.

26 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 27

 D
Extensive Lineup Supports Diverse User Needs

PC-Related Motor Driver ICs evices

SANYO small, precise motor driver ICs, gaining high marks in a wide range of fields.
SANYO’s CD-ROM system expertise makes it possible to provide custom-specification motor driver ICs
fast, using the company’s accumulated CAD technology, comprehensive process menu, and latest circuit
technology.

Single-Chip Spindle Motor Driver + Actuator Driver Products

High-output, high-gain Spindle motor drivers Supply voltage Output Allowable
power Functions and features
current
Field Type number Package Control Drive Motor Io max dissipation Drive type
actuator drivers providing precise rotation system system system
VDD(V) VCC(V) VM(V) (A)
Pd max
(W)
Hall
device FG TSD
Notes

Single phase Four driver channels. Spindle: Direct PWM drive, voltage control, and built-in current limiter.
LV8210W SQFP48 4.5 to 5.5 1.0 — or 3 phases ▲ Actuators: Channels 1 to 3 are PWM BTL drivers.

Five driver channels. Spindle: Direct PWM drive, voltage control, and built-in current limiter.
Spindle Slim ✩ LV8211T TQFP64J 4.5 to 5.5 1.3 —
Single phase
and 3 phases ▲
Actuators: Channels 1 and 2 are PWM BTL drivers, channels 3 and 4 are current feedback,
Actuator Drivers Motor Drivers PWM PWM drive, built-in current limiter.
sensorless Six driver channels. Spindle: Direct PWM drive, voltage control, and built-in current limiter.
Single phase
✩ LV8212T TQFP64J 4.5 to 5.5 1.3 — and 3 phases ▲
Actuators: Channels 1 to 3 are PWM BTL drivers, channels 4 and 5 are current feedback,
4chBTL LA6541NH PWM drive, built-in current limiter.

LA6548NH LB11995H Seven driver channels. Spindle: Direct PWM drive, voltage control, and built-in current
Single phase limiter.
5chBTL LA6565 LB11680H ✽ LV8230M 4.0 to 5.5 4.0 to 14.0 1.5 — or 3 phases ▲ Actuators: Three BTL driver channels and 2 sled and 1 loading driver channels are current
feedback, PWM drive, built-in current limiter.

LA6566 LV8280T Single phase

Seven driver channels. Spindle: Direct PWM drive,
limiter.
voltage control, and built-in current
✽ LV8231M 4.0 to 5.5 4.0 to 14.0 1.5 — PWM or 3 phases ▲ Actuators: Four BTL driver channels and 2 sled driver channels are current feedback, PWM
6chBTL LA6261 Half- drive, built-in current limiter.
height
LA6590 ✽ LV8232M 4.0 to 5.0 4.0 to 14.0 1.5 — PWM Single phase
▲
Six driver channels. Spindle: Direct PWM drive, voltage control, and built-in current limiter.
Actuators: Two BTL driver channels and 2 sled and 1 loading driver channels are current
sensorless or 3 phases feedback, PWM drive, built-in current limiter.

Single phase ▲ Six driver channels. Spindle: Direct PWM drive, voltage control, and built-in current limiter.
✽ LV8233M 4.0 to 5.0 4.0 to 14.0 1.5 — PWM Actuators: Three BTL driver channels and 2 sled driver channels are current feedback, PWM
or 3 phases drive, built-in current limiter.

▲ : Available ✩ : New product ✽ : Under development

Actuator Drivers
PWM VDD Circuit configuration Output voltage Built-in reg (External PNP-TR)
Field Type number Package Circuits Op-amp Notes
Using low-saturation Single-chip direct PWM spindle input max. CH1 CH2 CH3 CH4 CH5 CH6
Low Setting
saturation function
Setting Output Reset
voltage on/off circuit
vertical PNP transistors motor driver + actuator driver Circuit type BTL
HSOP28H — 4 14.0 Power supply✽1 VS1 — — — — — 5.0V — ▲ • Inverted Darlington output
LA6541NH DIP30SDLP
Mute MUTE
Circuit type BTL
HSOP28H — 4 14.0 Power supply✽1 ▲
Loading Spindle + LA6548NH
DIP30SDLP
VCC — — — — — 3.3V — • Inverted Darlington output
Mute MUTE
Motor Drivers Actuator Driver Circuit type OPE AMP + BTL H-bridge • Low saturation voltage
LA6565 HSOP36R ▲ 5 14.0 Power supply✽1 VCC1 VCC2 — ▲ ▲ ▲ ▲ — — output
LV8210W LV8231M Mute MUTE1 MUTE2 — • Settable regulator voltage
LB1938T LV8211T LV8232M BTL
—
Circuit type BTL H-bridge
LB1930M LV8212T LV8233M LA6566 HSOP36R ▲ 5 14.0 Power supply✽1 VCC1 VCC2 — ▲ ▲ — — — — • Low saturation voltage
output
Mute MUTE —
LV8230M Circuit type BTL H-bridge
— 6 14.0 Power supply✽1 — CH5.6 — 3.3V — — • BTL inverted Darlington
LA6261 HSOP36R VCC1 VCC2 oniy output
✩: New product ✽: Under development Mute MUTE —
Circuit type BTL
▲ 6 14.0 Power supply✽1 ▲ — ▲ — — — • Low saturation voltage
✽ LA6590 HSSOP48R VCCP1 VCCP2 output
Mute MUTE1 MUTE2 MUTE34 MUTE56

M IC
▲ : Available *1 : Power supply : Output stage power supply

Spindle Motor Drivers

otor
Supply voltage Output Allowable
power Functions and features
current
Field Type number Package Control Drive Motor I max dissipation Drive type Hall
O Pd max Notes
device FG TSD
system system system
VDD(V) VCC(V) VM(V) (A) (W)
LB11995H HSOP28H 4 to 13.6 1.3 ★1.9 Current linear Single phase •Switchable between FG3 pulse and single pulse operation
•Two-mode current limiter
Half-height
LB11680H HSOP28H 4.5 to 5.5 8 to 14 1.3 2.0 Direct PWM Single phase ▲ •Direct PWM drive • Voltage control • Built-in current limiter
PWM Single phase
Slim LV8280T TSSOP30 4.5 to 5.5 1.0 — sensorless or 3 phases •Soft switching

Driver
▲ : Available ★ : Printed circuit board included

28 DVD-ROM/R/RW and CD-ROM/R/RW Devices DVD-ROM/R/RW and CD-ROM/R/RW Devices 29