Scribd
Upload
592 views

DeltaV Installation Procedure PDF

Uploaded by

Syed Hameed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
592 views

DeltaV Installation Procedure PDF

Uploaded by

Syed Hameed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

2016

INDIA GLYCOLS LIMITED - KASHIPUR

By-Sudhakar Dhapare (Emerson Process management)

DeltaV System Installation


Procedure for DeltaV Version R5.1

[SYSTEM INSTALLATION PROCEDURE]


TBW plant DeltaV DCS system upgradation for R5.1 system installation procedure. This document
will guide for System setup after Windows 7 installation till completion of DeltaV workstation
configuration.
Setting Up Network binding Order:
Go to Control Panel Network and Internet  Network Connections.
Use shortcut ‘Alt’ & ‘T’A Advanced  Advance settings.

Select following sequence if you have only two network LAN cards:
DeltaVSecondery – DeltaVPrimary

Select following sequence if you have only three network LAN cards:
DeltaVSecondery – PlantLan - DeltaVPrimary

Page 2 of 17
DeltaV R5.1 Installation
1. Install Windows 7 which should be inline with DeltaV Operating system guidelines.
2. After completion of Windows 7 installation 100% start with DeltaV R5.1 installation Disk-1.
3. Insert Disk in DVD drive.
4. Run the Deltav installation setup.

Page 3 of 17
5. System will start to load files & it will ask for reboot. Click on ‘Yes’ to reboot system.

Page 4 of 17
6. Login in to the system. After reboot setup will continue automatically.

7. System will continue to load files & it will ask for reboot. Click on ‘Yes’ to reboot system.

Page 5 of 17
8. After reboot system will continue to install further required components like Internet
Explorer 11.

Page 6 of 17
9. System will continue to load files & it will ask for reboot. Click on ‘Yes’ to reboot system.

10. After reboot system will continue to install further required components.

Page 7 of 17
11. After installing pre installation components automatically; further DeltaV system will start to
install DeltaV 10.3.5. Click on ‘Next’.

12. Select ‘Yes’ for Licence Agreement.

Page 8 of 17
13. Select appropriate work station type.
a. For Professional Plus : Tick on Professional Plus
b. For Operator Station: Tick on 3rd option, ‘Local Professional-Operator-Base-
Maintenance’.

14. Setup Type recommended is on ‘D’ drive. Select ‘Typical (DVData on D drive)’

Page 9 of 17
15. Click on Next.

16. Click On ‘Yes’

Page 10 of 17
17. DeltaV installation will start & during this we cannot terminate this setup till completion.
Further setup will be continue till the disk completion.

18. Insert Disk-2 in DVD drive & click on ‘Next’

Page 11 of 17
19. This will mention Disk release date. Click on ‘Ok’

20. Now setup will apply Microsoft OS Hotfixes. Click on ‘Yes’. This will take 3 to 4 hrs. No any
manual intervention will be required after this step.

21. After completion of Disk-2 reboot the system.

Page 12 of 17
DeltaV Workstation configuration
Procedure
1. Remove All network cables from the station which work station configuration is to
be run.

2. Open DeltaV Workstation Configuration

3. Click On ‘Next’.

Page 13 of 17
4. Select Appropriate Workstation type. Then Click On ‘Next’.

For ProPlus Station For Work Stations

2. Click ‘Next’ for ProPluse station.


For Other stations Click On ‘Browse’. Go in to folder where Workstation
configuration file is kept. Open this .cfg file. *Not applicable for ProPlus station.
Setup will continue automatically for ProPlus*

For ProPlus Station For Work Stations

Page 14 of 17
3. Select appropriate Workstation to be configured. *Not applicable for ProPlus
station. Setup will continue automatically for ProPlus*

4. Select appropriate Network card & assign it appropriately.

Page 15 of 17
5. Setup will continue further.

6. Click on ‘Ok’. This will logoff the system. We need to log on again.

7. Give server password. It should be of minimum 8 digit password.

Page 16 of 17
8. After password Workstation configuration completion massage will be displayed on
screen.

9. Connect workstation in ProPlus Network.


10. Open DeltaV explorer in ProPlus station.
11. Yellow Trangle will be displayed on this workstation, Download the workstation
from ProPlus station.
12. After downloading the workstation Yellow triangle will be disappear & system will
be ready for use.

Page 17 of 17

You might also like