C

E
BOULDER (TYP.)
12' MIN.

TRICKLE
CHANNEL
REINFORCED
PIPE
GROUT SLAB

10:1 MAX
MAINTENANCE
ACCESS ROAD B B
OUTFLOW
INFLOW
RCP

D 2" MIN GAP D

(D50=12") TO DRAIN NON-REINFORCED
SOIL RIPRAP OUTFLOW FOREBAY GROUT INFLOW

6" REINFORCED
GROUT SLAB
TRICKLE
CHANNEL
3/4 D RCP C

FLARED
2" MIN GAP
ACCESS RAMP
FOREBAY PLAN GROUT TOEWALL END
A OUTFLOW TO DRAIN INFLOW A N.T.S.

10:1
CONSTRUCTED WITH SECTION
FOREBAY
FILL CONCRETE FINISHED GRADE
8" D50=12"
D D DEPRESS SLAB 6" BELOW 12' MIN.
SOIL-RIPRAP
PIPE INVERT (SLOPE AT 1:1)
ACCESS RAMP
ENERGY 6" MIN. REINFORCED GROUT SLAB
TRICKLE 2/3 D
DISSIPATION TOP OF TRICKLE
CHANNEL
WALL CHANNEL CURB INFLOW

PIPE
TRICKLE CHANNEL 8"

E
INVERT
6" MIN. CDOT CLASS
NON-REINFORCED A FILTER MATERIAL
GROUT TOE WALL TO BE FOREBAY PLAN
DESIGNED BY ENGINEER SECTION B N.T.S. FINISHED GRADE
N.T.S.
FLARED END SECTION (FES)
D50 = 12" 6" MIN
SOIL RIPRAP DEPRESS GROUT TO
TOP OF TRICKLE REINFORCED
DIRECT INTIAL OVERFLOWS IMPACT BOULDER
GROUT SLAB
FOREBAY PLAN GROUT DEPTH AS INTO TRICKLE CHANNEL CHANNEL CURB 6'
N.T.S. REQUIRED TO PROVIDE RCP
INFLOW
REQUIRED VOLUME
2" MIN.GAP TO
DRAIN FOREBAY
FOREBAY EDGE DEPRESS SLAB 6" BELOW
NON-REINFORCED 8"
BOULDER, TYP. TRICKLE FES (SLOPE AT 1:1)
GROUT TOEWALL,
CHANNEL 6" MIN CDOT CLASS
GROUT PROFILE TO BE DESIGNED
INVERT A FILTER MATERIAL
BY ENGINEER
D50 = 12" SOIL
RIPRAP ADJACENT
6" MIN. REINFORCED 6" MIN. CDOT CLASS TO LOW FLOW
GROUT SLAB A FILTER MATERIAL CHANNEL
SECTION D
N.T.S. DEPRESS GROUT TO
FINISHED SECTION C DIRECT INTIAL OVERFLOWS
CONCRETE WALL N.T.S. GROUT DEPTH AS REQUIRED TO
GRADE INTO TRICKLE CHANNEL
(BEYOND) PROVIDE REQUIRED VOLUME
ACCESS RAMP CONSTRUCTED
TOP OF TRICKLE
CHANNEL CURB
WITH FILL CONCRETE
(BEYOND) 4 MAX MEDB - BOULDER LINED FOREBAY FORM GROVES IN
2" MIN GAP GAP TO 1 N.T.S. 2" MIN GAP TO
RAMP FOR TRACTION
DRAIN FOREBAY RCP DRAIN FOREBAY
8" (MIN)
TRICKLE CHANNEL 2/3 D FOREBAY DESIGN NOTES: FOREBAY EDGE
INVERT
INFLOW 1. CONCRETE FOREBAY SHOWN INCLUDES ACCESS RAMP AS REQUIRED FOR STANDARD EDBS. BOULDER, TYP.
THIS DETAIL SHALL BE MODIFIED AS APPROPRIATE FOR MODIFIED EDBS, INCLUDING GROUT PROFILE
REMOVAL OF THE ACCESS RAMP.
GROUT
2. IT IS THE RESPONSIBILITY OF THE DESIGN ENGINEER TO SIZE FOREBAY AND OUTLET NOTCH 6" MIN REINFORCED
TRANSITION FROM HEIGHT 6" MIN CDOT CLASS
6" MIN CDOT CLASS GROUT SLAB
OF FOREBAY TO HEIGHT OF 8" (MIN) (GAP) IN ACCORDANCE WITH USDCM VOLUME 3. A FILTER MATERIAL
A FILTER MATERIAL
TRICKLE CHANNEL CURB DEPRESS CONCRETE 6" BELOW
RCP INVERT ELEVATION (SLOPE AT 1:1)
3. OUTLET NOTCH SHALL EXTEND TO BOTTOM ELEVATION OF FOREBAY TO ALLOW FOREBAY SECTION E
TO COMPLETELY DRAIN. N.T.S.

SECTION A
4. ALL CONCRETE SHALL BE REINFORCED, CAST-IN-PLACE AND DESIGNED BY A REGISTERED
PROFESSIONAL ENGINEER. THE ENGINEER SHALL DESIGN AND DETAIL CONCRETE
N.T.S.
THICKNESS, REBAR AND COLD JOINT CONNECTIONS (WHEN MULTIPLE CONCRETE POURS
EDB BOULDER LINED FOREBAY
N.T.S.
CONCRETE LINED FOREBAY ARE REQUIRED).
N.T.S.
5. ALL DIMENSIONS PROVIDED ON DETAILS SHALL BE CONSIDERED MINIMUMS.
PLOTTED:8/10/2020 4:23:37 PM

REFERENCE: SCALE: Standard Plan Revision

No. Date Description 6924 S. LIMA ST.
CENTENNIAL, CO 80112
PHONE (720) 874-6500
FOREBAY DETAILS SHEET
1 OF 1
www.arapahoegov.com