5 10 15 20 25 30 35 40 45 50 55 60 65 70 75

DATE NO CONTENT SIGN

A B C
A
~5 +
- 0.05 +
- 0.10 +
- 0.25
M 1
E ~ 15 +
- 0.07 +
- 0.20 +
- 0.35
N
D 2 ~ 50 +
- 0.10 +
- 0.30 -+ 0.50

User’s manual Safety Precautions CAUTION Safety Precautions Table of Contents ~ 150 +
- 0.18 +
- 0.55 +
- 0.90
Any changes or modifications in construction of this 3 +
This equipment has been tested and found to comply device which are not expressly approved by the party WARNING
~ 500 - 0.30 -+ 0.90 -+ 1.50
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
responsible for compliance could void the user's A violation of labeling regulations can Names of parts 6
authority to operate the equipment. cause serious injury or death
provide reasonable protection against harmful
interference in a residential installation.
CE WARNING
Changes and modifications not expressly approved by
Power on/off 7
This equipment generate, uses and can radiate radio
frequency energy and, if not installed and used in
the party responsible for compliance could void the
user's authority to operate the equipment.
Charging the battery 8
accordance with the instructions, may cause harmful It is desirable that it be installed and operated with at
5
interference to radio communications. However, there is least 20cm or more between the radiator and person’s Keep out of direct sunlight and away Do not place heavy objects on the Do not place containers of liquid
Cover Open method 9
from a heat source. product. on the product.
no guarantee that interference will not occur in a body(excluding extremities:hand,wrists,feet, and ankles)
particular installation. Inserting printing paper 9
If this equipment does cause harmful interference to
2200 STAND-BY
Description of LED Status
sprocket radio or television reception which can be determined
by turning the equipment off and on, the user is
EN Test Regulations
ETSI EN 300 328 V1.9.1 Do not spray water directly onto the Do not place the product in very low Do not attempt to disassemble, repair
Indicators
10

Direct Current
product when cleaning. temperatures. and remodel it for yourself.

encouraged to try to correct the interference by one or ETSI EN 301 489-1 V1.9.2
more of the following measures. ETSI EN 301 489-17 V2.2.1
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Components check 11
Reorient or relocate the receiving antenna.
FCC ID : 2AJJ9SNPRH-1603
Increase the separation between the equipment and
BATTERY WARNINGS Zink Smart Sheet 12
receiver. Do not drop or give it impact. Comply with rated (5V1A) voltage

1 Avoid contact with leaking or a damaged battery. and current.

Connect the equipment into an outlet on a circuit

2 Do not short battery teminals. Application Connection 13
different from that to which the receiver is connected. NOTICE
Consult the dealer or an experienced radio, TV
3 Adult supervision is recommended when product is
used by young children. A violation of labeling regulations
and Printing
technical for help. 4 Avoid areas of excessive heat or moisture. causes minor injury or damage to the - APP Connection
10 Only shielded interface cable should be used. 5 Do not disassemble the battery. product Android Connection
Finally, any changes or modifications to the equipment This product contains electrical or electronic ios Connection
by the user not expressly approved by the grantee or materials. The presence of these materials - Printing (both for Android & iOS)
manufacturer could void the users authority to operate may. if not disposed of properly, have - Setting (both for Android & iOS)
such equipment. potential adverse effects on the environment
This device complies with Part 15 of the FCC Rules.
and human health. Do not place the product in a hot or Keep out of the reach of children. Keep away from magnetic interference.
Product specifications 18
Presence of this label on the product means it should humid place.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
not be disposed of as unsorted waste and must be Items to check before 19
collected separately. As a consumer, you are responsible
(2) this device must accept any interference received, for ensuring that this product is disposed of properly. reporting a malfunction
including interference that may cause undesired
operation of this device. Do not place the product in a place
with humidity, dust and soot.
Wipe it with a dry cloth when cleaning.

2 3 4
6 7 8 9
Names of parts Power on/off Charging the battery Cover Open method Description of LED Status
15 Indicators
Push
Micro USB Port (only for charging) Top cover

Open
Push the
power button
Charge indicator LED Status indicator LED
Reset button Charging/operating status LED indicators
ON Press the power button for about 3 to 5 seconds.
OFF Press the power button for about 2 seconds. Charging Operating Current Details
This device has a built-in battery. Inserting printing paper status status status
Note indicator indicator
Make sure that the battery is charged fully before use.
20 When you turn on the power, the operating status Prepare the blue Smart Sheet and white printing paper Off
Turn on the power
LED indicator blinks for about 5 seconds. Average charging time: About 1 hour and 30 minutes to print.
after unpacking the photo printing paper pack.
Paper exit You can print it out when the blinking ends, Wait for print
and the LED is turned on white. Open the top cover and insert the Smart Sheet and
Checking charging status indicator Standby/ command. Turn off
printing paper as shown in the figure. On automatically after
Charging status indicator Description of status the set time.
Charging in progress Charging in The battery is
Charging completed progress being charged.
Charging in The battery is fully
completed charged.
Notice
Power off, image
The use of a non-standard charger can cause Operating/ transmission, image
malfunction and exception from the subjects of Flashing processing, printing,
warranty service. cooling standby
There may be the risk of electric shock during No paper, paper jam,
the process of charging, so please use with care. cancel operation,
25 Error/ cover open, low
Do not give abnormal impacts. Flashing battery, image not
supported, update
failure, etc.

30

Components check Zink Smart Sheet Application Connection and <Printing (both for Android & iOS)>
Printing - ios Connection
1. Execute the HP sprocket App.
ZINK Smartsheet
® www.ZINK.com

<APP Connection> 1. Turn on the power of the device. 2. Select the designed photo on [ camera / instargram
Must Load! Barcode facing
バーコードを下にして必ず読み込ませてください ! 2. For Bluetooth connection, change the mode to / facebook / flickr / camera roll ] from Main screen.
装纸时需将此纸放于底部 読み込み時は用紙の１番下に入れてください - Android Connection “Turn on” [Bluetooth] from [Settings] of the device.
3. Select the Print button at the bottom line.
FROM ZINK IMAGING
3. Connect “HP sprocket (XX:XX)” in the searched list.
(MAC Address can be checked in the label inside
W888-0134B

the device.)
Features
Provide optimum image quality correction suitable
35 Print
for each printing paper pack
Remove foreign objects from printer head.

How to use
Eject automatically before printing out the paper
in initial output.
Poor quality and occurrence of horizontal lines can be
improved by repeatedly printing 2 to 3 times.
Zink photo paper USB Cable Recycle until the printing paper of each printing paper
pack is exhausted.

Notice
Optimum image quality cannot be guaranteed
when the Smart Sheet of each printing paper pack
is not used, or the bar code is damaged.
40 Long-term storage after opening the printing
Manual
paper pack can have a bad effect on printing
quality due to a discoloration or distortion of
printing paper.

11 12 13 14
16 17 18 19
症状
4. Begin printing when sending photo to printer on <Description for Setting> Product specifications Items to check before Problems Checklist

screen. Type Size reporting a malfunction This device requires the proper
White LED flashes temperature of (15~32°C) to
Function Description
Paper size 50 x 76 (mm) Problems Checklist and printed paper facilitate smooth printing
Errors Errors definition does not come out. operation. Thus, a greater
Type of supported PNG(2550x3300)JPEG(baseline) The power does Check to see if the battery is
Within a maximum of 10M Byte charged. warm-up time is required in
image file/size not turn on.
45 Battery Status Battery Gauge check Progressive JPEG not supported temperatures that are lower
Reboot the Bluetooth of the than ideal, and cooling times
Paper used ZINK Paper Bluetooth phone, or connect directly from Printed paper are greater when the temperature
Setting for Auto Power on/off
Auto OFF Paper storage Temperature : 20 ~ 25°C connection is not the Settings menu. comes out too late. is higher than ideal. Please wait
(none / 3mins / 5mins / 10mins) established. Try connecting in about 5 a moment to reach the proper
conditions Humidity : 40 ~ 55% RH
minutes after turning on the temperature.
Product operating Temperature : 5 ~ 40°C
Mac Address Mac Address power to the device. The image quality is somewhat
conditions Humidity : Less than 70% (35°C) The printed image
The paper is automatically degraded when editing the image
Optimal print Temperature : 15 ~ 32°C Printing paper ejected if you turn on the power quality differs
Firmware Version Firmware Version indication using Pomini App’s Edit menu.
conditions Humidity : Less than 70%(32°C) seems to be after turning it off. Print it after greatly from the
jammed. printing out the Smart Sheet 2 original image Print it again after printing out the
Hardware Version Hardware Version indication Power on/Standby/
<Setting (both for Android & iOS)> LED display Communication/Charge/Error/ to 3 times. quality. Smart Sheet 2 to 3 times.
Print/Update The printing paper should be The Smart Sheet within the same
Stopped during
pack with printing paper should
1. Select the Menu button on the top of the left screen
Communication Bluetooth 4.0 printing operation. stored in an environment with
low temperature/humidity. be used.
on Main. Do not fold or crumble the paper.
External connection Check to see if the image has the
2. Select the Devices menu. Micro USB port (charging only)
terminal Check the Auto Time Off value proper resolution (1280x2448) or
3. Do setting and checking for each functions on Devices Rated DC 5V / 1.0A within “Settings” -> “see more” higher.
USB power supply adapter (optional) The power turns of the App.(None, 3 minutes, COLOR CMYK
screen.
50 off automatically 5 minutes, 10 minutes) The printed image quality cannot
Normal operating after a certain be guaranteed in case you use PROCESS Offset Printing
DC 8V The operating status LED printing paper of other companies.
voltage period of time. flickering Red indicates there is MATERIAL
Use the original printing paper.
500mAh lithium ion no power remaining on the
Built-in battery (rechargeable) battery. In this case, charge the The above methods Turn on the power after pressing
Proper image battery with a dedicated adapter. do not resolve the the Reset Hole with a pointed
More than 1280 x 2448 pixel problems. object.
resolution The printed photo Print it again after printing out
Weight 186g shows a line. the Smart Sheet 2 to 3 times.
A slash mark (A line may appear in case
Android : 4.0 or higher appears in the
iOS : 5.1 or higher an impact is applied to the printer
Support App middle of the during the printing operation.)
(Support may not be provided photo.
version depending on the user’s Smart
phone version and environment.)
disconnect connect NO CODE MATERIAL TREATMENT Q'TY MODEL REMARK
※ Product design and specifications are subject to
change without notice.
DATE 2016.08.08
DRAWN DESIGN CHECK APPRO
TOL +
NAME MANUAL USER (Japan)
-
55
SCALE SIZE

A1 DWG NO GK07X0000100
UNIT m/m

DS Global. co., ltd.