CD home

Ermeto Original
Rotary fittings
CD home

Rotary fittings

Visual index EO rotary fittings

DG 101 DG 102-R DG 102-M

p. P6 p. P7 p. P8

EO 24° cone end / Male BSPP thread – Male metric thread –

EO 24° cone end ED-seal (ISO 1179) / EO 24° cone end ED-seal (ISO 9974) / EO 24° cone end
DG 103 DG 104-R DG 104-M
p. P9 p. P10 p. P11

EO 24° cone end / Male BSPP thread – Male metric thread –

EO 24° cone end ED-seal (ISO 1179) / EO 24° cone end ED-seal (ISO 9974) / EO 24° cone end
DG 105 DG 106-R DG 106-M
p. P12 p. P13 p. P14

EO 24° cone end / Male BSPP thread – Male metric thread –

EO 24° cone end ED-seal (ISO 1179) / EO 24° cone end ED-seal (ISO 9974) / EO 24° cone end
DG 107 DG 108
p. P15 p. P16

EO 24° cone end / EO 24° cone end /

EO 24° cone end EO 24° cone end
DVGE-R DVGE-M
p. P17 p. P18

Male BSPP thread – Male metric thread –

ED-seal / EO 24° cone end ED-seal / EO 24° cone end
DVWE-R DVWE-M
p. P19 p. P20

Male BSPP thread – Male metric thread –

ED-seal / EO 24° cone end ED-seal / EO 24° cone end

P2 Catalogue 4100-5/UK
CD home

Rotary fittings

DG Ball bearing rotary fittings

for working pressures up to 250 bar. Low starting torque. Favourable pressure/RPM ratio

Application: Construction systems:

Connecting a fixed point to a rotating, swinging or moving 8 different versions with one rotational axis. Multiaxial
machine part via hoses. rotary couplings on request. Tube connections according
To prevent torsion and to avoid small hose radius. to DIN 2353, series S.
Maximum working pressure 250 bar (peak pressure)
Flow media: Male stud sealing by Eolastic seals of NBR.
Male stud with metric parallel or BSPP thread.
Hydraulic oils and lubricants on mineral oil base.
Also for hydraulic fluids HETG and HEES.
Not suitable for corrosive and HFC-fluids or gases.
Assembly instructions:
The life of a rotary fitting depends considerably on a
Construction: stress-free line connection. Therefore the direct connec-
tion with tubes is to be avoided.
Compact, maintenance-free construction, service-proved. For connection of hoses the use of swivel nut fittings (DIN
Combined ball and plain bearing with constant lubrication. 3865) is recommended.
Low starting torque. Wear-resistant annular piston seal- We recommend short, straight hose lines (free hose
ings. length approx. 5 x hose O.D.). Thus shocks, vibrations etc.
are absorbed.
Materials:
Casing, body nut of steel, annular piston sealing: POM
(e. g. Delrin)/FKM (e. g. Viton). Eolastic sealing: NBR
(e. g. Perbunan), also available in FKM.

Surface:
Zinc-plated with yellow chromated (A3C).

Nominal temperatures:
–25° C up to +80° C.

Warehousing:
Ball bearing rotary fittings can be stocked for 6 months.
Warehousing up to 1 year is possible with storage condi-
tions acc. to DIN 7716.

Chart 1
P
Number of Tube DN Nominal Permissible number of revolutios (rpm.) under a working pressure of Initial torque at
revolutions O.D. diameter (mm) 25 bar 64 bar 100 bar 160 bar 250 bar 250 bar/Nm

and starting 6
5,0 1500 750 400 200 85 0.08
8
torques:
12
9,5 800 400 200 100 45 0.24
16
20
16,0 300 150 75 38 15 0.8
25
30
26,0 200 100 50 25 10 2.0
38

P3 Catalogue 4100-5/UK
CD home

Rotary fittings

DG Ball bearing rotary fittings

9 6 2 1

DN

7 8 4 5 3

9 ring piston
8 intermediate ring
7 rubber spring
6 base
5 pivot
4 ball
3 top
2 raceway
1 dust seal
position specification

P4 Catalogue 4100-5/UK
CD home

Rotary fittings

Plain bearing rotary fittings

for slow rotating, swinging or moving machine parts up to 40 bar (series L) or up to 100 bar (series S).

Application: Nominal temperature:

Connecting a fixed point to a rotating, swinging or moving For sealings of NBR:
machine part via hoses. –35° C up to +100° C.
To prevent torsion and to avoid small hose radius. For sealings of FKM:
–25° C up to +120° C.
Flow media:
Hydraulic oils and lubricants on mineral oil base.
Also for hydraulic fluids HETG and HEES.
Not suitable for corrosive and HFC-fluids or gases.

Tube O.D. DN
Nominal diameter
06L 06S 4
Male thread 08L 08S 5
10L 10S 6
12L 12S 8
DN

15L 14S 16S 10

18L 22L 20S 25S 16
28L 30S 22
Safety nut
35L 43L 38S 25
Thrust bearing disc
Guide fitting
Eolastic sealing
O-ring
Spiral teflon ring

Construction: Number of revolutions:

Compact, maintenance-free construction, service-proved.
Series L
Tube O.D. 6 8 10 12 15 18 22 28 35
Materials:
Permiss. no.
Casing, body nut and progressive ring of steel. Sealing of rpm 28 28 21 17 13 10 10 7 7
NBR (Perbunan), on request of FKM (Viton). Series S
Plain bearing rotary fittings are not available in stainless Tube O.D. 6 8 10 12 14 16 20 25 30 38
steel or brass.
Permiss. no
rpm 11 11 9 7 5 5 4 4 3 3
Surface:
Zinc-plated with yellow chromate (A3C).
Assembly instruction:
P
Construction-system: The life of a rotary fitting depends considerably on a
Series L, tube O. D. 6 to 35 mm, working pressure (PN): stress-free line connection. Therefore the direct connec-
40 bar tion with tubes is to be avoided.
Series S, tube O. D. 6 to 38 mm, working pressure (PN): For connection of hoses use of swivel nut connections
100 bar (DIN 3865) is recommended.
Tube connection according to DIN 2353, ISO 8434-1. We recommend short, straight hose lines (free hose
Male stud with metric thread and BSP thread. length approx. 5 × hose O. D.). Thus shocks, vibrations etc.
Sealing of male stud by Eolastic-seals. are absorbed.

P5 Catalogue 4100-5/UK
CD home

Rotary fittings

DG 101 Straight ball bearing rotary union

EO 24° cone end / EO 24° cone end

X2) Axis

D1

Series 5 DN L1 L2 L3 S1 S2 S3
Weight
g/1 piece Order code* A3C1)
S4 ) 06 5.0 61 47 76 22.0 17 17.0 113 DG101/06SOMD Pressure rating see chart 1
08 5.0 61 47 76 22.0 17 19.0 118 DG101/08SOMD Pressure rating see chart 1
12 9.5 72 57 89 30.0 24 24.0 258 DG101/12SOMD Pressure rating see chart 1
16 9.5 74 57 93 30.0 27 30.0 264 DG101/16SOMD Pressure rating see chart 1
20 16.0 92 71 114 41.0 36 36.0 578 DG101/20SOMD Pressure rating see chart 1
25 16.0 96 72 120 41.0 41 46.0 652 DG101/25SOMD Pressure rating see chart 1
30 26.0 109 82 135 60.0 46 50.0 1321 DG101/30SOMD Pressure rating see chart 1
38 26.0 114 82 143 60.0 55 60.0 1509 DG101/38SOMD Pressure rating see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG101/06SOMDA3C VIT
surface required.

P6 Catalogue 4100-5/UK
CD home

Rotary fittings

DG 102-R Straight male stud ball bearing rotary union

Male BSPP thread – ED-seal (ISO 1179) / EO 24° cone end

X1) Axis
X2) Eolastic-sealing

D1

Series 5 T1 DN D3 L1 L2 L3 L4 S1 S2 S3
Weight
g/1 piece Order code* A3C1)
S4) 06 G 1/4 A 5.0 19 49 42.0 12 57.0 22 17 17 110 DG102/06SROMD Pressure ratings see chart 1
08 G 1/4 A 5.0 19 49 42.0 12 57.0 22 17 19 116 DG102/08SROMD Pressure ratings see chart 1
12 G 3/8 A 9.5 22 60 52.5 12 69.0 30 24 24 243 DG102/12SROMD Pressure ratings see chart 1
16 G 1/2 A 9.5 27 60 51.5 14 70.0 30 27 30 256 DG102/16SROMD Pressure ratings see chart 1
20 G 3/4 A 16.0 32 76 65.5 16 87.5 41 36 36 558 DG102/20SROMD Pressure ratings see chart 1
25 G1A 16.0 40 78 66.0 18 90.5 41 41 46 853 DG102/25SROMD Pressure ratings see chart 1
30 G 1 1/4 A 26.0 50 89 75.5 20 102.0 60 46 50 1312 DG102/30SROMD Pressure ratings see chart 1
38 G 1 1/2 A 26.0 55 92 76.0 22 107.0 60 55 60 1494 DG102/38SROMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG102/06SROMDA3C VIT/NBR
surface required.

P7 Catalogue 4100-5/UK
CD home

Rotary fittings

DG 102-M Straight male stud ball bearing rotary union

Male metric thread – ED-seal (ISO 9974) / EO 24° cone end

X1) Axis
X2) Eolastic-sealing

D1

Series 5 T1 DN D3 L1 L2 L3 L4 S1 S2 S3
Weight
g/1 piece Order code* A3C1)
S4) 06 M 14 × 1.5 5.0 19 49 42.0 12 57.0 22 17 17 112 DG102/06SMOMD Pressure ratings see chart 1
08 M 14 ×1.5 5.0 19 49 42.0 12 57.0 22 17 19 113 DG102/08SMOMD Pressure ratings see chart 1
12 M 18 × 1.5 9.5 24 60 52.5 12 69.0 30 24 24 245 DG102/12SMOMD Pressure ratings see chart 1
16 M 22 × 1.5 9.5 27 60 51.5 14 70.0 30 27 30 259 DG102/16SMOMD Pressure ratings see chart 1
20 M 27 × 2 16.0 32 76 65.5 16 87.5 41 36 36 558 DG102/20SMOMD Pressure ratings see chart 1
25 M 33 × 2 16.0 40 78 66.0 18 90.5 41 41 46 637 DG102/25SMOMD Pressure ratings see chart 1
30 M 42 × 2 26.0 50 89 75.5 20 102.0 60 46 50 1316 DG102/30SMOMD Pressure ratings see chart 1
38 M 48 × 2 26.0 55 92 76.0 22 107.0 60 55 60 1491 DG102/38SMOMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG102/06SMOMDA3C VIT/NBR
surface required.

P8 Catalogue 4100-5/UK
CD home

Rotary fittings

DG 103 Elbow ball bearing rotary union

EO 24° cone end / EO 24° cone end

X2) Axis

D1

Series 5 DN L1 L2 L3 L4 L5 L6 S1 S2 S3
Weight
g/1 piece Order code* A3C1)
S4) 06 5.0 51.5 59.0 23 16.0 44.5 16.0 22 17 17 134 DG103/06SOMD Pressure ratings see chart 1
08 5.0 51.5 59.0 24 17.0 44.5 17.0 22 17 19 141 DG103/08SOMD Pressure ratings see chart 1
12 9.5 63.0 72.0 29 21.5 55.5 21.5 30 22 24 296 DG103/12SOMD Pressure ratings see chart 1
16 9.5 63.0 73.0 33 24.5 54.5 24.5 30 22 30 298 DG103/16SOMD Pressure ratings see chart 1
20 16.0 83.0 94.5 37 26.5 72.5 26.5 41 36 36 772 DG103/20SOMD Pressure ratings see chart 1
25 16.0 83.0 95.5 42 30.0 71.0 30.0 41 36 46 803 DG103/25SOMD Pressure ratings see chart 1
30 26.0 102.5 116.0 49 35.5 89.0 35.5 60 50 50 1722 DG103/30SOMD Pressure ratings see chart 1
38 26.0 102.5 117.0 57 41.0 86.5 41.0 60 50 60 1931 DG103/38SOMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG101/06SOMDA3C VIT
surface required.

P9 Catalogue 4100-5/UK
CD home

Rotary fittings

DG 104-R Elbow male stud ball bearing rotary union

Male BSPP thread – ED-seal (ISO 1179) / EO 24° cone end

X1) Axis
X2) Eolastic-sealing

D1

Series 5 T1 DN D3 L1 L2 L3 L4 L6 S1 S2 S3
Weight
g/1 piece Order code* A3C1)
4
S) 06 G 1/4 A 05 19 23 16.0 39.5 12 31 22 17 17 131 DG104/06SROMD Pressure ratings see chart 1
08 G 1/4 A 05 19 24 17.0 39.5 12 32 22 17 19 135 DG104/08SROMD Pressure ratings see chart 1
12 G 3/8 A 10 22 29 21.5 51.0 12 38 30 22 24 284 DG104/12SROMD Pressure ratings see chart 1
16 G 1/2 A 10 27 33 24.5 49.0 14 43 30 22 30 284 DG104/16SROMD Pressure ratings see chart 1
20 G 3/4 A 16 32 37 26.5 67.0 16 48 41 36 36 752 DG104/20SROMD Pressure ratings see chart 1
25 G1A 16 40 42 30.0 65.0 18 54 41 36 46 789 DG104/25SROMD Pressure ratings see chart 1
30 G 1 1/4 A 26 50 49 35.5 82.5 20 62 60 50 50 1713 DG104/30SROMD Pressure ratings see chart 1
38 G 1 1/2 A 26 55 57 41.0 80.5 22 72 60 50 60 1915 DG104/38SROMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG104/06SROMDA3C VIT/NBR
surface required.

P10 Catalogue 4100-5/UK

CD home

Rotary fittings

DG 104-M Elbow male stud ball bearing rotary union

Male metric thread – ED-seal (ISO 9974) / EO 24° cone end

X1) Axis
X2) Eolastic-sealing

D1

Series 5 T1 DN D3 L1 L2 L3 L4 L6 S1 S2 S3
Weight
g/1 piece Order code* A3C1)
4
S) 06 M 14 × 1.5 05 19 23 16.0 39.5 12 31 22 17 17 132 DG104/06SMOMD Pressure ratings see chart 1
08 M 14 × 1.5 05 19 24 17.0 39.5 12 32 22 17 19 136 DG104/08SMOMD Pressure ratings see chart 1
12 M 18 × 1.5 10 22 29 21.5 51.0 12 38 30 22 24 286 DG104/12SMOMD Pressure ratings see chart 1
16 M 22 × 1.5 10 27 33 24.5 49.0 14 43 30 22 30 287 DG104/16SMOMD Pressure ratings see chart 1
20 M 27 × 2 16 32 37 26.5 67.0 16 48 41 36 36 752 DG104/20SMOMD Pressure ratings see chart 1
25 M 33 × 2 16 40 42 30.0 65.0 18 54 41 36 46 788 DG104/25SMOMD Pressure ratings see chart 1
30 M 42 × 2 26 50 49 35.5 82.5 20 62 60 50 50 1717 DG104/30SMOMD Pressure ratings see chart 1
38 M 48 × 2 26 55 57 41.0 80.5 22 72 60 50 60 1913 DG104/38SMOMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG104/06SMOMDA3C VIT/NBR
surface required.

P11 Catalogue 4100-5/UK

CD home

Rotary fittings

DG 105 Double elbow ball bearing rotary union

EO 24° cone end / EO 24° cone end

X1) Axis

D1

Series 5 DN L1 L2 L3 L4 L5 L6 L7 L8 L9 S1 S2 S3
Weight
g/1 piece Order code* A3C1)
4
S) 12 9.5 39.5 26.5 43 21.5 38 81 53.0 24 22 24 29 50.5 384 DG105/12SOMD Pressure ratings see chart 1
16 9.5 39.5 25.5 44 24.5 43 87 53.0 30 22 24 33 52.5 377 DG105/16SOMD Pressure ratings see chart 1
20 16.0 56.5 39.5 61 26.5 48 109 76.0 36 36 32 37 71.5 1015 DG105/20SOMD Pressure ratings see chart 1
25 16.0 56.5 38.0 62 30.0 54 116 76.0 46 36 32 42 74.0 1034 DG105/25SOMD Pressure ratings see chart 1
30 26.0 65.0 44.5 71 35.5 62 133 92.5 50 50 50 49 84.5 2344 DG105/30SOMD Pressure ratings see chart 1
38 26.0 65.0 42.0 73 41.0 72 145 92.5 60 50 50 57 89.0 2485 DG105/38SOMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG105/12SOMDA3C VIT
surface required.

P12 Catalogue 4100-5/UK

CD home

Rotary fittings

DG 106-R Double elbow male stud ball bearing rotary union

Male BSPP thread – ED-seal (ISO 1179) / EO 24° cone end
(Adjustable at male thread axis, consisting of DG105 + EGE)

X1) Axis
X2) Eolastic-sealing

D1

Series 5 T1 DN D3 L1 L2 L3 L4 L6 L7 S1 S2 S3
Weight
S4 g/1 piece Order code* A3C1)
4
S) 12 G 3/8 A 5.0 24 34 26.5 53.0 12 55.5 99 24 22 24 22 484 DG106/12SROMD Pressure ratings see chart 1
16 G 1/2 A 9.5 27 34 25.5 53.0 14 61.5 105 24 24 30 27 547 DG106/16SROMD Pressure ratings see chart 1
20 G 3/4 A 16.0 32 50 39.5 76.0 16 69.5 131 36 32 36 32 1288 DG106/20SROMD Pressure ratings see chart 1
25 G1A 16.0 40 50 38.0 76.0 18 78.0 140 36 32 46 41 1528 DG106/25SROMD Pressure ratings see chart 1
30 G 1 1/4 A 26.0 50 58 44.5 92.5 20 86.5 158 50 50 50 50 3004 DG106/30SROMD Pressure ratings see chart 1
38 G 1 1/2 A 26.0 55 58 42.0 92.5 22 101.0 174 50 50 60 55 3419 DG106/38SROMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7. P

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG106/06SROMDA3C VIT/NBR
surface required.

P13 Catalogue 4100-5/UK

CD home

Rotary fittings

DG 106-M Double elbow male stud ball bearing rotary union

Male metric thread – ED-seal (ISO 9974) / EO 24° cone end
(Adjustable at male thread axis, consisting of DG105 + EGE)

X1) Axis
X2) Eolastic-sealing

D1

Series 5 T1 DN D3 L1 L2 L3 L4 L6 L7 S1 S2 S3
Weight
S4 g/1 piece Order code* A3C1)
S)4
12 M 18 × 1.5 5.0 24 34 26.5 53.0 12 55.5 99 24 22 24 24 495 DG106/12SMOMD Pressure ratings see chart 1
16 M 22 × 1.5 9.5 27 34 25.5 53.0 14 61.5 105 24 24 30 27 551 DG106/16SMOMD Pressure ratings see chart 1
20 M 27 × 2 16.0 32 50 39.5 76.0 16 69.5 131 36 32 36 32 1289 DG106/20SMOMD Pressure ratings see chart 1
25 M 33 × 2 16.0 40 50 38.0 76.0 18 78.0 140 36 32 46 41 1532 DG106/25SMOMD Pressure ratings see chart 1
30 M 42 × 2 26.0 50 58 44.5 92.5 20 86.5 158 50 50 50 50 3007 DG106/30SMOMD Pressure ratings see chart 1
38 M 48 × 2 26.0 55 58 42.0 92.5 22 101.0 174 50 50 60 55 3441 DG106/38SMOMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG106/06SMOMDA3C VIT/NBR
surface required.

P14 Catalogue 4100-5/UK

CD home

Rotary fittings

DG 107 Straight bulkhead ball bearing rotary union

EO 24° cone end / EO 24° cone end

X1) Axis

D1

Series 5 DN T1 L1 L2 L3 L4 L5 L6 S1 S2 S3 S4
Weight
g/1 piece Order code* A3C1)
S)4
06 5.0 M 14 × 1.5 23 16.0 49 42.0 5 87 22 17 19 17 134 DG107/06SOMD Pressure ratings see chart 1
08 5.0 M 16 × 1.5 23 16.0 49 42.0 5 87 22 17 22 19 143 DG107/08SOMD Pressure ratings see chart 1
12 9.5 M 20 × 1.5 23 15.5 60 52.5 5 100 30 24 27 24 291 DG107/12SOMD Pressure ratings see chart 1
16 9.5 M 24 × 1.5 26 17.5 60 51.5 5 105 30 27 32 30 328 DG107/16SOMD Pressure ratings see chart 1
20 16.0 M 30 × 2 39 28.5 76 65.5 15 137 41 36 41 36 710 DG107/20SOMD Pressure ratings see chart 1
25 16.0 M 36 × 2 42 30.0 78 66.0 15 144 41 41 46 46 847 DG107/25SOMD Pressure ratings see chart 1
30 26.0 M 42 × 2 44 30.5 89 75.5 15 159 60 46 50 50 1533 DG107/30SOMD Pressure ratings see chart 1
38 26.0 M 52 × 2 47 31.0 92 76.0 15 168 60 55 65 60 1930 DG107/38SOMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
10
= PN (MPa)

Delivery without nut and ring. Information on ordering complete

P
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG107/06SOMDA3C VIT
surface required.

P15 Catalogue 4100-5/UK

CD home

Rotary fittings

DG 108 Elbow bulkhead ball bearing rotary union

EO 24° cone end / EO 24° cone end

X1) Axis

D1

Series 5 DN T1 L1 L2 L3 L4 L5 L6 L7 L8 S1 S2 S3
Weight
S4 g/1 piece Order code* A3C1)
S4) 06 5.0 M 14 × 1.5 23 16.0 23 16.0 5 39.5 31 70.0 22 17 19 17 154 DG108/06SOMD Pressure ratings see chart 1
08 5.0 M 16 × 1.5 23 16.0 23 17.0 5 39.5 32 70.0 22 17 22 19 166 DG108/08SOMD Pressure ratings see chart 1
12 9.5 M 20 × 1.5 23 15.5 29 21.5 5 51.0 38 83.0 30 22 27 24 333 DG108/12SOMD Pressure ratings see chart 1
16 9.5 M 24 × 1.5 26 17.5 33 24.5 5 49.0 43 85.0 30 22 32 30 354 DG108/16SOMD Pressure ratings see chart 1
20 16.0 M 30 × 2 39 28.5 37 26.5 15 67.0 48 117.5 41 36 41 36 904 DG108/20SOMD Pressure ratings see chart 1
25 16.0 M 36 × 2 42 30.0 42 30.0 15 65.0 54 119.5 41 36 46 46 999 DG108/25SOMD Pressure ratings see chart 1
30 26.0 M 42 × 2 44 30.5 49 35.5 15 82.5 62 140.0 60 50 50 50 1935 DG108/30SOMD Pressure ratings see chart 1
38 26.0 M 52 × 2 47 31.0 57 41.0 15 80.5 72 142.0 60 50 65 60 2351 DG108/38SOMD Pressure ratings see chart 1
1
) Pressure shown = item deliverable
4
) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
*Please add the suffixes Steel, zinc
below according to the material/ yellow plated A3C DG108/06SOMDA3C VIT
surface required.

P16 Catalogue 4100-5/UK

CD home

Rotary fittings

DVGE-R Straight male stud plain bearing rotary union

Male BSPP thread – ED-seal / EO 24° cone end

L8 larger than DIN 3852

X1) Eolastic-sealing chart page P21

D1

Series 5 T1 DN D3 L1 L2 L3 L5 L6 S1 S2 S3
Weight
g/1 piece Order code* A3C
PN (bar)1)
VIT
L3) 06 G 1/4 A 4.0 19 28.0 21.0 12 18.0 40 19 12 14 43 DVGE06LROMD 40 40
08 G 1/4 A 5.0 19 28.0 21.0 12 18.0 40 19 14 17 44 DVGE08LROMD 40 40
10 G 3/8 A 6.0 22 32.0 25.0 12 18.0 40 24 17 19 74 DVGE10LROMD 40 40
12 G 1/2 A 8.0 27 34.0 27.0 14 21.0 42 27 19 22 116 DVGE12LROMD 40 40
15 G 3/4 A 10.0 32 39.0 32.0 16 24.0 47 32 24 27 214 DVGE15LROMD 40 40
18 G1A 16.0 40 42.5 35.0 18 27.5 51 41 27 32 337 DVGE18LROMD 40 40
22 G1A 16.0 40 46.5 39.0 18 27.5 55 41 32 36 376 DVGE22LROMD 40 40
28 G 1 1/4 A 22.0 50 48.0 40.5 20 31.0 57 50 41 41 586 DVGE28LROMD 40 40
35 G 1 1/2 A 25.0 55 55.0 44.5 22 35.0 66 55 46 50 868 DVGE35LROMD 40 40
S4) 06 G 1/4 A 4.0 19 30.0 23.0 12 18.0 38 19 14 17 50 DVGE06SROMD 100 100
08 G 1/4 A 5.0 19 31.0 24.0 12 18.0 39 19 17 19 55 DVGE08SROMD 100 100
10 G 3/8 A 6.0 22 34.0 26.5 12 18.0 43 24 19 22 85 DVGE10SROMD 100 100
12 G 1/2 A 8.0 27 36.0 28.5 14 21.0 45 27 22 24 134 DVGE12SROMD 100 100
14 G 3/4 A 10.0 32 41.0 33.0 16 24.0 51 32 24 27 220 DVGE14SROMD 100 100
16 G 3/4 A 10.0 32 42.0 33.5 16 24.0 52 32 27 30 230 DVGE16SROMD 100 100
20 G1A 16.0 40 48.5 38.0 18 27.5 60 41 32 36 385 DVGE20SROMD 100 100
25 G1A 16.0 40 52.5 40.5 18 27.5 65 41 41 46 483 DVGE25SROMD 100 100
30 G 1 1/4 A 22.0 50 55.0 41.5 20 31.0 68 50 46 50 691 DVGE30SROMD 100 100
38 G 1 1/2 A 25.0 55 63.0 47.0 22 35.0 78 55 55 60 1080 DVGE38SROMD 100 100
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
10
= PN (MPa)

Delivery without nut and ring. Information on ordering complete

P
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
Steel, zinc
*Please add the suffixes yellow plated A3C DVGE06LROMDA3C NBR
below according to the material/
FKM (Viton) VITA3C DVGE06LROMDVITA3C
surface required.

P17 Catalogue 4100-5/UK

CD home

Rotary fittings

DVGE-M Straight male stud plain bearing rotary union

Male metric thread – ED-seal / EO 24° cone end

L8 larger than DIN 3852

X1) Eolastic-sealing chart page P21

D1

Series 5 T1 DN D3 L1 L2 L3 L5 L6 S1 S2 S3
Weight
g/1 piece Order code* A3C
PN (bar)1)
VIT
L3) 06 M 14 × 1.5 4.0 19 27.0 20.0 12 18.0 27 19 12 14 44 DVGE06LMOMD 40 40
08 M 14 × 1.5 5.0 19 28.0 21.0 12 18.0 29 19 12 17 45 DVGE08LMOMD 40 40
10 M 18 × 1.5 6.0 24 33.0 26.0 12 18.0 30 24 14 19 87 DVGE10LMOMD 40 40
12 M 22 × 1.5 8.0 27 34.0 27.0 14 21.0 32 27 17 22 120 DVGE12LMOMD 40 40
15 M 27 × 2 10.0 32 40.0 33.0 16 24.0 36 32 19 27 215 DVGE15LMOMD 40 40
18 M 33 × 2 16.0 40 45.0 37.5 18 27.5 40 41 27 32 349 DVGE18LMOMD 40 40
22 M 33 × 2 16.0 40 47.0 39.5 18 27.5 44 41 27 36 383 DVGE22LMOMD 40 40
28 M 42 × 2 22.0 50 51.5 44.0 20 31.0 47 50 36 41 590 DVGE28LMOMD 40 40
35 M 48 × 2 25.0 55 64.5 54.0 22 35.0 56 55 41 50 876 DVGE35LMOMD 40 40
S4) 06 M 14 × 1.5 4.0 19 28.0 21.0 12 18.0 31 19 12 17 51 DVGE06SMOMD 100 100
08 M 14 × 1.5 5.0 19 29.0 22.0 12 18.0 32 19 14 19 56 DVGE08SMOMD 100 100
10 M 18 × 1.5 6.0 24 34.5 27.0 12 18.0 34 24 17 22 98 DVGE10SMOMD 100 100
12 M 22 × 1.5 8.0 27 35.5 28.0 14 21.0 38 27 17 24 139 DVGE12SMOMD 100 100
16 M 27 × 2 10.0 32 42.5 34.0 16 24.0 43 32 24 30 239 DVGE16SMOMD 100 100
20 M 33 × 2 16.0 40 50.0 39.5 18 27.5 48 41 27 36 385 DVGE20SMOMD 100 100
25 M 33 × 2 16.0 40 54.5 42.5 18 27.5 54 41 36 46 494 DVGE25SMOMD 100 100
30 M 42 × 2 22.0 50 61.5 48.0 20 31.0 62 50 41 50 695 DVGE30SMOMD 100 100
38 M 48 × 2 25.0 55 71.0 55.0 22 35.0 72 55 50 60 1088 DVGE38SMOMD 100 100
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
Steel, zinc
*Please add the suffixes yellow plated A3C DVGE06LMOMDA3C NBR
below according to the material/
FKM (Viton) VITA3C DVGE06LMOMDVITA3C
surface required.

P18 Catalogue 4100-5/UK

CD home

Rotary fittings

DVWE-R Elbow male stud plain bearing rotary union

Male BSPP thread – ED-seal / EO 24° cone end

L8 larger than DIN 3852

X1) Eolastic-sealing chart page P21

D1

Series 5 T1 DN D3 L1 L2 L3 L5 L6 L7 S1 S2 S3
Weight
g/1 piece Order code*
PN (bar)1)
A3C VIT
L3) 06 G 1/4 A 4 19 19 12.0 12 18.0 20.0 27 19 12 14 50 DVWE06LROMD 40 40
08 G 1/4 A 5 19 21 14.0 12 18.0 21.0 29 19 12 17 50 DVWE08LROMD 40 40
10 G 3/8 A 6 22 22 15.0 12 18.0 26.0 30 24 14 19 83 DVWE10LROMD 40 40
12 G 1/2 A 8 27 24 17.0 14 21.0 27.0 32 27 17 22 129 DVWE12LROMD 40 40
15 G 3/4 A 10 32 28 21.0 16 24.0 33.0 36 32 19 27 232 DVWE15LROMD 40 40
18 G1A 16 40 31 23.5 18 27.5 37.5 40 41 27 32 393 DVWE18LROMD 40 40
22 G1A 16 40 35 27.5 18 27.5 39.5 44 41 27 36 406 DVWE22LROMD 40 40
28 G 1 1/4 A 22 50 38 30.5 20 31.0 44.0 47 50 36 41 664 DVWE28LROMD 40 40
35 G 1 1/2 A 25 55 45 34.5 22 35.0 54.0 56 55 41 50 1005 DVWE35LROMD 40 40
S4) 06 G 1/4 A 4 19 23 16.0 12 18.0 21.0 31 19 12 17 58 DVWE06SROMD 100 100
08 G 1/4 A 5 19 24 17.0 12 18.0 22.0 32 19 14 19 65 DVWE08SROMD 100 100
10 G 3/8 A 6 22 25 17.5 12 18.0 27.0 34 24 17 22 103 DVWE10SROMD 100 100
12 G 1/2 A 8 27 29 21.5 14 21.0 28.0 38 27 17 24 152 DVWE12SROMD 100 100
14 G 3/4 A 10 32 30 22.0 16 24.0 33.0 40 32 19 27 236 DVWE14SROMD 100 100
16 G 3/4 A 10 32 33 24.5 16 24.0 34.0 43 32 24 30 276 DVWE16SROMD 100 100
20 G1A 16 40 37 26.5 18 27.5 39.5 48 41 27 36 415 DVWE20SROMD 100 100
25 G1A 16 40 42 30.0 18 27.5 42.5 54 41 36 46 569 DVWE25SROMD 100 100
30 G 1 1/4 A 22 50 49 35.5 20 31.0 48.0 62 50 41 50 886 DVWE30SROMD 100 100
38 G 1 1/2 A 25 55 57 41.0 22 35.0 55.0 72 55 50 60 1375 DVWE38SROMD 100 100 P
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
Steel, zinc
*Please add the suffixes yellow plated A3C DVWE06LROMDA3C NBR
below according to the material/
FKM (Viton) VIT DVWE06LROMDVITA3C
surface required.

P19 Catalogue 4100-5/UK

CD home

Rotary fittings

DVWE-M Elbow male stud plain bearing rotary union

Male metric thread – ED-seal / EO 24° cone end

L8 larger than DIN 3852

X1) Eolastic-sealing chart page P21

D1

Series 5 T1 DN D3 L1 L2 L3 L5 L6 L7 S1 S2 S3
Weight
g/1 piece Order code*
PN (bar)1)
A3C VIT
L3) 06 M 14 × 1.5 4.0 19 19 12.0 12 18.0 20.0 27 19 12 14 51 DVWE06LMOMD 40 40
08 M 14 × 1.5 5.0 19 21 14.0 12 18.0 21.0 29 19 12 17 51 DVWE08LMOMD 40 40
10 M 18 × 1.5 6.0 24 22 15.0 12 18.0 26.0 30 24 14 19 92 DVWE10LMOMD 40 40
12 M 22 × 1.5 8.0 27 24 17.0 14 21.0 27.0 32 27 17 22 160 DVWE12LMOMD 40 40
15 M 27 × 2 10.0 32 28 21.0 16 24.0 33.0 36 32 19 27 236 DVWE15LMOMD 40 40
18 M 33 × 2 16.0 40 31 23.5 18 27.5 37.5 40 41 27 32 405 DVWE18LMOMD 40 40
22 M 33 × 2 16.0 40 35 27.5 18 27.5 39.5 44 41 27 36 409 DVWE22LMOMD 40 40
28 M 42 × 2 22.0 50 38 30.5 20 31.0 44.0 47 50 36 41 660 DVWE28LMOMD 40 40
35 M 48 × 2 25.0 55 45 34.5 22 35.0 54.0 56 55 41 50 1012 DVWE35LMOMD 40 40
S4) 06 M 14 × 1.5 4.0 19 23 16.0 12 18.0 21.0 31 19 12 17 59 DVWE06SMOMD 100 100
08 M 14 × 1.5 5.0 19 24 17.0 12 18.0 22.0 32 19 14 19 66 DVWE08SMOMD 100 100
10 M 18 × 1.5 6.0 24 25 17.5 12 18.0 27.0 34 24 17 22 113 DVWE10SMOMD 100 100
12 M 22 × 1.5 8.0 27 29 21.5 14 21.0 28.0 38 27 17 24 153 DVWE12SMOMD 100 100
16 M 27 × 2 10.0 32 33 24.5 16 24.0 34.0 43 32 24 30 284 DVWE16SMOMD 100 100
20 M 33 × 2 16.0 40 37 26.5 18 27.5 39.5 48 41 27 36 427 DVWE20SMOMD 100 100
25 M 33 × 2 16.0 40 42 30.0 18 27.5 42.5 54 41 36 46 581 DVWE25SMOMD 100 100
30 M 42 × 2 22.0 50 49 35.5 20 31.0 48.0 62 50 41 50 898 DVWE30SMOMD 100 100
38 M 48 × 2 25.0 55 57 41.0 22 35.0 55.0 72 55 50 60 1373 DVWE38SMOMD 100 100
1
) Pressure shown = item deliverable
3
) L = light series; 4) S = heavy series
PN (bar)
= PN (MPa)
10
Delivery without nut and ring. Information on ordering complete
fittings or alternative sealing materials see page I7.

Order code suffixes

Material Suffix Example Standard sealing
surface material (no additonal.
and material suffix needed)
Steel, zinc
*Please add the suffixes yellow plated A3C DVWE06LMOMDA3C NBR
below according to the material/
FKM (Viton) A3C VIT DVWE06LMOMDVITA3C
surface required.

P20 Catalogue 4100-5/UK

CD home

Rotary fittings

Port tapping for plain bearing rotary fittings DVGE and DVWE

Port tapping form X

according to DIN 3852, part 1 and part 2
(for parallel male studs)

Thread d4 small a1 b1 L8 W
d1 +0.4 max min min
M 14 × 1.5 20 1.5 12 19.0 0.1
M 18 × 1.5 252) 2.0 12 19.0 0.1
M 22 × 1.5 28 2.5 14 22.0 0.1
M 27 × 2 33 2.5 16 25.0 0.2
M 33 × 2 412) 2.5 18 28.5 0.2
M 42 × 2 512) 2.5 20 32.0 0.2
M 48 × 2 56 2.5 22 36.0 0.2
G 1/4 A 202) 1.5 12 19.0 0.1
G 3/8 A 23 2.0 12 19.0 0.1
G 1/2 A 282) 2.5 14 22.0 0.1
G 3/4 A 33 2.5 16 25.0 0.2
G1A 412) 2.5 18 28.5 0.2
G 1 1/4 A 512) 2.5 20 32.0 0.2
G 1 1/2 A 56 2.5 22 36.0 0.2
1
) Not in DIN 3852
2
) Different from DIN 3852

P21 Catalogue 4100-5/UK