Introduction

Editing/Creating a Preset
The GNX3 was designed to make sound processing easy and intuitive. Because the GNX3 provides both
Amp Modeling and Effects Processing, the editing functions are divided into two sections: the Amp/Cabinet
Modeling section and the Effects section. The GeNetX™ technology contained in the GNX3 lets you go
much further than mere Amp Modeling. GeNetX™ lets you create your own Amp/Cabinet HyperModel™
and store this custom creation to a User Amp/Cabinet location. When editing either the Amp/Cabinet
Modeling, or the Effects section, you must start with one of the User or Factory Presets. It is not possible to
start with a completely empty preset. The preset you begin with does not need to be in the location that
you intend to save it. To begin creating a HyperModel™ or just edit the effects, you must select a preset as
your starting point.

Amp/Cabinet Modeling
After selecting a preset, you can select the Amp Models or Cabinet Types for your preset. Amp/Cabinet
Modeling applies the tone of one of several vintage or modern Amp Models and Cabinet Types to your guitar
signal. The GNX3 includes accurate emulations of fifteen guitar Amp Models, four Bass Amp Models, one
Acoustic Guitar Simulation, and sixteen Speaker Cabinet Types.Your choices include:

Amp Models
DIRECT 1 - Turns the amp modeling off BLUES 12 - A sweet blues tone
blackfac 2 - Based on a ‘65 Fender Twin Reverb mdrngain 13 - Based on a Marshall JCM900
BOUTIQue 3 - Based on a Matchless DC30 FUZZ 14 - A vintage fuzz distortion
rectfied 4 - Based on a Mesa Dual Rectifier BASS MaN 15 - Based on a Fender Bassman
HOTROD 5 - Based on a Mesa Boogie Mark II C hiwattag 16- Based on a HiWatt 50 watt stack
tweeD 6 - Based on a ‘57 Fender Tweed Deluxe ACOUSTic 17 - A flat top acoustic guitar
britcmbo 7 - Based on a Vox AC30 top boost rockbass 18- Based on an Ampeg SVT
cleantub 8 - A clean tube combo setting mdrnbass 19- Based on an Ashdown ABM-C410H
britstck 9 - Based on a ‘78 Marshall Master Volume britbass 20- Based on a Trace-Elliot Commando
CRUNCH 10 - A nice crunchy tube amp combo EMPTY U1 to U9 - User HyperModel™ Locations
HI GAIN 11 - A high gain tube amp

Marshall® is a registered trademark of Marshall Amplification Plc. Vox® is a registered trademark of Korg UK. Fender, Matchless, HiWatt,
Ashdown, Ampeg,Trace-Elliot, Sunn, and Mesa Boogie, are trademarks of their respective companies and are in no way associated with
DigiTech.

Cabinet Types
direct 1- Turns the cabinet modeling off botq4X12 10
- Based on a Boutique 4x12
amer2X12 2 - Based on an American 2x12 amer4x10 11
- Based on a Bassman 4x10
BRit4X12 3 - Based on a British 4x12 65 1x12 12
- Based on a ‘65 Tweed 1x12
vntg4x12 4 - Based on a Vintage 30 4x12 Jazz1x15 13
- Based on a Fender Pro 1x15
BRit2X12 5 - Based on a British 2x12 bass1x15 14
- Based on an Ampeg Portaflex
twed1X12 6 - Based on an American 1x12 bass4x10 15
- Based on an Ashdown 4x10
blnd2X12 7 - Based on a Blonde 2x12 w/Tweeter
Fane4X12 8 - Based on a Fane 4x12 bass2x15 16 - Based on an Sunn 200S 2x15
grnb4X12 9 - Based on a Greenback 4x12 EMPTY U1 to U9 - User Locations

Editing Amp Models and Cabinet Types

Each GNX3 preset has a Green, Red, and Yellow (Warped) Amp Channel. The Green and Red Amp
Channels include individually selectable Amp Models, Cabinet Types, Gain, EQ, and Level settings.The
Speaker Cabinet’s resonant frequency can be selected. Once the Green and Red channel’s models are
selected, you can toggle channels instantly using the Amp Channel Footswitch (only when Stompbox
14