Scribd
Upload
69 views1 page

Astm A743 Cf8m

Uploaded by

akdrnl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

Astm A743 Cf8m

Uploaded by

akdrnl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Material ‐ ASTM A743 CF8M

Standard Specification for Castings, Iron‐Chromium‐Nickel, Corrosion Resistant, for


General Application
Group ‐ Ferrous Stainless Steel Alloys
Sub Group ‐ ASTM A743 / A743M Casting, Iron‐Chromium‐Nickel, corrosion Resistant Casting, for General
Applicaton
Application ‐ Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry ‐ Casting
Chemical Composition Heat Treatment
Carbon C% 0.080 max.
Silicon Si % 2.000 max.
Manganese Mn % 1.500 max.
Phosphorus P% 0.040 max. Solution Annealing
Sulphur S% 0.040 max.
Chromium Cr % 18.000 ‐ 21.000
Nickel Ni % 9.000 ‐ 12.000
Molybdenum Mo % 2.000 ‐ 3.000
Iron Fe % Balance Mechanical Properties
‐ ‐ ‐ Tensile Strength in Mpa 485 min.
‐ ‐ ‐ Yield Strength in Mpa 205 min.
‐ ‐ ‐ Elongation in % 30 min.
‐ ‐ ‐ Reduction of Area in % ‐
‐ ‐ ‐ Hardness in BHN ‐
‐ ‐ ‐ Impact in Joule ‐

Cross Reference Table


Material Standard Country Grade Belong to the Industry
316 AISI USA Bar, Wire, Strip, Plate, Sheet and Forging
1.4409 DIN Germany Casting
1.4409 EN European Union Casting
316 S 17 BS British Wire for Cold Forged Fasteners
SUS 316 JIS Japan Hot Rolled Equal Leg Angles
03CH17N14M3 GOST Russia Pipes, Fittings, Bar, Sheet and Forging
ASTM A 351 CF8M ASTM USA Casting

Further any inquiry to discuss with Gravity Cast Pvt. Ltd. – Gravity Group of Companies team member Call
on +918469160029, or email [email protected]

All information in our data sheets and website is indicative only and is not intended to be a substitute for the full specification from which it is extracted. It is intended to
provide typical values to allow comparison between metal alloy option rather than a definitive statement of mechanical performance or suitability for a particular
application as these will vary with temperature, product type and product application. It is presented apart from contractual obligations and does not constitute any
guarantee of properties or of processing or application possibilities in individual cases. Our warranties and liabilities are stated exclusively in our terms of business.

ONE STOP SOLUTION FOR METAL PARTS

You might also like