PR-1 Series

Adjustable Pressure Reducing Regulator

pressure regulators
The PR-1 Series is a versatile pressure reducing Features & Specifications
regulator designed to fulfill a wide range of needs • Gas or liquid service
in instrumentation sample systems and other • 316L stainless steel, INCONEL®, PTFE, and
applications such as semiconductor processing Tefzel® (or optional main seat material choice)
gases. Many features of the PR-1 make it ideal for only in flow stream
a wide range of applications controlling pressures • Electropolished 316L body with better than 25 Ra
at low to moderate flows in gas or liquid service. diaphragm cavity surface finish
Stainless steel caps and adjusting screws prevent • Stainless steel cap with SS adjusting screw
atmospheric corrosion and maintain appearance. • Inlet pressures of up to 6000 psi
Enhanced internal body surface finish of better than • Adjustable outlet pressure ranges of 0–10, 0–25,
25 Ra plus electropolishing allows easier cleaning 0–50, 0–100, 0–250, 0–500, and 0–750 psig
and potentially less particle contamination in the • Operating temperatures of −40° F up to +500° F
flow stream. (−40° C up to +260° C)
Three different seat materials, three alternate orifice • 20 micron filters
sizes and 7 pressure control ranges with INCONEL® • Bubble-tight shutoff under most conditions
diaphragms offer the user a wide spectrum • Cv flow coefficients 0.025, 0.06, 0.20, and 0.50
of capabilities for pressure control with inlet (0.06 standard)
pressures up to 6000 psig and standard operating Options
temperatures up to 500° F (260° C). • Wetted materials of construction: MONEL®,
HASTELLOY®, Titanium and 6MO
• Panel mount (13⁄8˝ mounting hole)
• Special diaphragm assembly for water service
• SS inlet pressure gauges
• SS outlet pressure gauges
• Base-mounting brackets
• Captured vent
• Self-relieving

1
PR-1 Series To Order, contact your local Distributor Link below:
www.goreg.com/distributor/index.htm
Verify that your chosen part number is valid using the GO Wizards at
www.goreg.com/products/matrix/index.htm

How to Order
PR1 –
BODY MATERIAL OPTIONS
1 316L stainless steel, stainless A EB33
steel diaphragm B EB5
D Helium leak test
4 MONEL®, INCONEL® diaphragm E Pressure test certificate
5 HASTELLOY® B, INCONEL® F Certificate of Conformity
diaphragm G CMTR
6 HASTELLOY® C, INCONEL® S 70 Micron inlet filter screen for liquid app.
diaphragm 9 Sulfinert coating
7 Titanium, INCONEL® diaphragm CAP ASSEMBLY
B 6MO, INCONEL® diaphragm 1 Standard, stainless steel
C SS316L, INCONEL® diaphragm 4 Panel mount, stainless steel
7 Captured vent, stainless steel
PORT CONFIGURATION 8 Tamper-proof, stainless steel
A Standard J Captured vent, panel mount, stainless
For more port configurations steel
see page 33. DIAPHRAGM FACING/BACKING MATERIAL
1 PTFE/metal backing, standard
PROCESS PORT TYPES 6 Tefzel® ring/metal backing
(GAUGE PORT TYPES, IF SPECIFIED)
1 1⁄4˝ FNPT (1⁄4˝ FNPT gauge ports), standard DIAPHRAGM TYPE
4 3⁄8˝ FNPT (1⁄4˝ FNPT gauge ports) 1 Standard diaphragm
3 Self-relieving
SURFACE FINISH OF DIAPHRAGM CAVITY 7 Liquid Service
1 < 25 Ra, standard OUTLET RANGE
SEAT MATERIAL C 0–10 psig
D 0–25 psig
A Tefzel® E 0–50 psig
B CF PTFE G 0–100 psig
H PCTFE (formerly Kel-F® 81) I 0–250 psig
P PEEK™ High Temp Service, Metal Knob J 0–500 psig
Q PEEK™ Low Temp Service, Plastic Knob W 0–750 psig
FLOW COEFFICIENT (Cv)
3 0.06, standard
5 0.2
C 0.025
H 0.5
NOTE: Contact the factory for any additional requirements.

Maximum Temperature & Outline and Mounting Dimensions

Operating Inlet Pressures Panel mount option requires 1.390 (35.3mm) minimum
MAXIMUM MAXIMUM OPERATING INLET
SEAT MATERIAL TEMPERATURE* @ PRESSURE diameter panel cut out. 0.150 maximum panel thickness.
Tefzel® 150° F (66° C) @ 3600 psig (24.82 MPa)
Weight = 1.9 lbs (0.86 kg)
PCTFE
175° F (80° C) @ 6000 psig (41.37 MPa) 2.1 (53mm)
(formerly Kel-F® 81)
PEEK™ 500° F (260° C) @ 3600 psig (24.82 MPa)
PEEK™ 175° F (80° C) @ 6000 psig (41.37 MPa)
CF PTFE 175° F (80° C) @ 3600 psig (24.82 MPa)
* Temperatures in excess of 175° F (80° C) require a metal knob or
the tamper-proof option. STANDARD
VENT TO
ATMOSPHERE

4.15 (105mm)

Ø 2.12 (54mm)

1/4" NPT TYP

® ®
INCONEL and MONEL are registered trademarks of Special Metals Corporation.
Tefzel® is a registered trademark of the DuPont Company.
HASTELLOY® is a registered trademark of Haynes International, Inc. 0.75 (19mm)
Kel-F® is a registered trademark of 3M Company.
PEEK™ is a trademark of Victrex PLC.

10-32 UNF X 0.25 MIN

2 0.75 (19mm) FULL THDS (2X)