8 7 6 5 4 3 2 1

ITEM QTY UNIT DESCRIPTION SIZE MATERIAL SPEC MATERIAL DRAWING NUMBER UNIT WEIGHT
NUMBER WEIGHT UNIT
1 1 EA HEAD SHAFT ASSEMBLY ZX11890774 10292806-DWK 24,000 KG
2 1 EA TAIL SHAFT ASSEMBLY ZX11881516 10291890-DWK 16,089 KG
3 1 EA SHAFT AND ROLLER ASSEMBLY ZX11892187 10292943-DWK 3,478 KG
4 72 EA SHAFT AND ROLLER ASSEMBLY ZX11890352 10292545-DWK 2,936 KG
5 56 EA TPH AND PH SHAFT AND ROLLER ASSEMBLY ZX11890354 10292729-DWK 2,966 KG
F 6 5 EA DEAD PLATE ASSEMBLY ZX11899257 10293884-DWK 969 KG F
7 258 EA SPACER BLOCK ,FOR SUPPORT SHAFT BEARING ZX11192060 5-84357 31 KG
8 258 EA SHIM SET ,FOR SUPPORT SHAFT BEARING ZX11192101 5-84357 7.0 KG
9 2 EA SHIM SET ,FOR TAILSHAFT BEARING ZX11192102 5-84357 46 KG
10 2 EA SHIM SET ,FOR HEADSHAFT BEARING ZX11192103 5-84357 54 KG
11 129 EA PILLOW BLOCK BEARING - FIXED ZX11901369 236314-VDG 68 KG
12 129 EA PILLOW BLOCK BEARING - FREE ZX11901370 236315-VDG 68 KG
13 1 EA GEAR BOX , C.7542 TRAVELING GRATE-LH ZX11904627 236312-VDG 6,000 KG
14 1 EA GEAR BOX , C.7542 TRAVELING GRATE-RH ZX11899428 236313-VDG 6,000 KG
15 4 EA PIN - TORQUE ARM MOUNTING ZX11909179 10295073-DWK 23 KG
16 4 EA TORQUE ARM KEEPER PLATE ZX11909195 10295083-DWK 0.50 KG
17 2 EA PLATE - TORQUE ARM MOUNTING ZX11909182 10295076-DWK 71 KG
18 2 EA PLATE - TORQUE ARM MOUNTING ZX11909192 10295081-DWK 71 KG
19 2 EA WELDMENT - TORQUE ARM MOUNTING BASE ZX11909194 10295082-DWK 85 KG
20 2 EA SHAFT BRUSH SEAL ZX11909210 236180-VDG 0.00 KG
21 256 EA SHAFT BRUSH SEAL ZX11826286 236057-VDG 0.00 KG
22 35 EA SEALING COMPOUND 732, WHITE, 10.1 OZ PA 777002939 N11477783 0.29 KG
23 8 EA BOLT, HEXAGONAL ISO4014-M48X260-8.8-UNPL ST 8.8 UNPLTD MM0338026 4.6 KG
24 8 EA NUT, HEXAGONAL ISO4032-M48-8-UNPLTD 8 UNPLTD 04-096625 04-096617-01 0.97 KG
25 16 EA WASHER, PLAIN ISO7089-48-200HV-UNPLTD ST 200HV UNPLTD MM0343801 0.19 KG
E 26 8 EA BOLT, HEXAGONAL ISO4014-M56X320-8.8-UNP ISO898-1 8.8 UNPLTD 04-128770 1.00 KG E
27 8 EA NUT, HEXAGONAL ISO4032-M56-10-UNPLTD ST 10 UNPLTD N01563257 0.90 KG
28 16 EA WASHER, PLAIN ISO7089-56-300HV-UNPLTD STEEL 300HV UNPLTD 04-123696 1.00 KG
29 8 EA SCREW, HEXAGONAL ISO4017-M36X130-8.8-UNP ST 8.8 UNPLTD MM0428990 1.5 KG
30 8 EA NUT, HEXAGONAL, THIN ISO4035-M36-04-UNP UNPLTD 04-112148 04-109408-01 0.25 KG
31 2064 EA NUT, HEXAGONAL ISO4032-M12-8-UNPLTD ST 8 UNPLTD 04-121260 04-121255-01 0.02 KG
32 2064 EA WASHER, PLAIN ISO7093-12-200HV-CS-UNPLTD CARBON STEEL UNPLTD MM0413723 0.04 KG
33 1024 EA BOLT, HEXAGONAL ISO4014-M24X200-8.8-UNP ST 8.8 UNPLTD 1003725211 0.80 KG
34 1032 EA NUT, HEXAGONAL ISO4032-M24-8-UNPLTD ST 8 UNPLTD 04-121263 04-121255-01 0.12 KG
35 2064 EA WASHER, PLAIN ISO7089-24-200HV-UNPLTD ST 200HV UNPLTD MM0355501 0.07 KG
36 24 EA BOLT, HEXAGONAL ISO4014-M16X55-8.8-UNPLT ISO898-1 8.8 UNPLTD 65-611-196-308 0.00 KG
37 24 EA NUT, HEXAGONAL ISO4032-M16-8-UNPLTD ST 8 UNPLTD 04-121261 04-121255-01 0.03 KG
38 24 EA WASHER, PLAIN ISO7089-16-200HV-UNPLTD ST 200HV UNPLTD SA984327 0.01 KG
39 8 EA SCREW, HEXAGONAL ISO4017-M16X40-8.8-UNP ST 8.8 UNPLTD 65-611-101-141 0.09 KG
40 8 EA WASHER SPRING DIN127-B16-FST-FLZNNC ST FLZNNC MM0454190 0.09 KG
41 8 EA BOLT, HEXAGONAL ISO4014-M24X140-8.8-UNP ST 8.8 UNPLTD 1003725169 0.58 KG
42 8 EA WASHER, PLAIN ISO7089-24-200HV-UNPLTD ST 200HV UNPLTD MM0355501 0.07 KG
43 8 EA NUT, HEXAGONAL ISO4032-M24-8-UNPLTD ST 8 UNPLTD 04-121263 04-121255-01 0.12 KG
44 8 EA BOLT, HEXAGONAL ISO4014-M24X220-8.8-UNPL ST 8.8 UNPLTD 1003705218 0.85 KG
45 1 EA SPEED SENSOR RING ASSEMBLY ZX11923344 10296625-DWK 8.5 KG
D 46 4 EA NUT, HEXAGONAL, THIN ISO4035-M100-8-A3A 8 A3A SC3020652 0.00 KG D
47 2 EA PLATE WASHER ZX11928783 10297070-DWK 1.8 KG
48 2 EA RUBBER SPACER ZX11930578 10297195-DWK 0.10 KG
49 2 EA RUBBER SPACER ZX11930779 10297239-DWK 0.10 KG
50 1 EA DEAD PLATE ASSEMBLY DISCHARGE ZONE ZX11928784 10297019-DWK 2,420 KG

C C

B B

BASE LINE

CLASSIFICATION: RESTRICTED
A ANG2-07-ME-DE-05-17-10046-01
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, ANGLES ARE IN TITLE PROJECT No. EQUIPMENT No.
DEGREES AND DECIMALS OF A DEGREE, AND TOLERANCES ARE PER TABLE BELOW. 02 RELEASED HOLD, ADDED ITEMS 46 THRU 50, ITEM 6 WAS QTY OF 6 DEJ2 JMP1 2021-11-11 Metso Minerals Industries, Inc. DRN: AJM
C.007542
DIMENSION LENGTH 0 TO 150 TO 800 TO 2300 TO 6000 & Pyro Processing DATE: 2021-02-04
ABOVE TO INCLUSIVE 150 800 2300 6000 UP 01 INITIAL RELEASE AJM JMP1 2021-10-01 UPPER CHAIN SUPPORT ASSEMBLY MATERIAL No.: ZX11887726
2715 Pleasant Valley Rd.
MACHINE TOLERANCE ± 0.1 0.5 1.3 2.5 3.3 York, PA 17402 USA FOR 5664 WIDE TRAVELING GRATE CKD: MDM1 MATERIAL Spec.:

FABRICATION TOLERANCE ± 1 2 3 4 6 DATE: 2021-09-03 MATERIAL Wt.: 469,758 Wt. Unit: KG

THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO METSO OUTOTEC CORPORATION​ SCALE: 1:125 For Construction
HOLE TRUE POSITION ∅ 1.5 OR ITS SUBSIDIARIES (“METSO OUTOTEC”) AND IS PROTECTED BY TRADE SECRET, COPYRIGHT
AND/OR OTHER LAWS. ​
CUSTOMER: JINDAL STEEL AND POWER LTD APPD: JMP1 ANSI DRAWING NO SHEET REV

DO NOT SCALE THIRD ANGLE

REV DESCRIPTION OF REVISION BY APPD DATE IT MAY NOT BE ACCESSED, USED, COPIED OR DISCLOSED WITHOUT THE WRITTEN CONSENT OF
LOCATION: ANGUL, ODISHA, INDIA DATE: 2021-10-01 F 10292283-DWK 1 02
PROJECTION METSO OUTOTEC. ALL RIGHTS RESERVED.© 2021 OF 3

8 7 6 5 4 3 2 1