S.No.

Item Description Unit Qty Nos Total Qty Add on 10% Rate Total DSR-18 item no

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means

1 over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) CUM 18.787 2.000 37.573 41.331 181.85 7515.955062 2.6.1
including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5
m, as directed by Engineer-in-charge. All kinds of soil.

Providing and laying in position ready mixed plain cement concrete, using fly ash and
cement content as per approved design mix and manufactured in fully automatic
batching plant and transported to site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per mix design of specified grade for plain
cement concrete work, including pumping of R.M.C. from transit mixer to site of laying
and curing, excluding the cost of centering, shuttering and finishing, including cost of
2 curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard CUM 0.506 2.000 1.011 1.112 7598.7 8451.7680555 4.19.1.2
setting of concrete, improve workability without impairing strength and durability as
per direction of the Engineer-in-charge. Note : (1) Excess/less cement used than
specified in this item is payable/ recoverable separately. (2) Fly ash conforming to
grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456.
Uniform blending with cement is to be ensured in accordance with clauses 5.2 and
5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works upto plinth level: M-10
grade plain cement concrete (cement content considered @ 220 kg/cum)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
3 position and binding all complete upto plinth level. For Thermo-Mechanically Treated KGS 0.459 2.000 0.917 1.009 83.5 84251.5 5.22.6
bars of grade Fe-500D or more

Providing and laying in position ready mixed M-25 grade concrete for reinforced
cement concrete work, using cement content as per approved design mix,
manufactured in fully automatic batching plant and transported to site of work in
transit mixer for all leads, having continuous agitated mixer, manufactured as per
mix design of specified grade for reinforced cement concrete work, including
pumping of R.M.C. from transit mixer to site of laying , excluding the cost of
4 centering, shuttering finishing and reinforcement, including cost of admixtures in CUM 5.437 2.000 10.873 11.961 8398.65 100452.77561 5.37.1
recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength and durability as per direction of
the Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement
used as per design mix is payable/recoverable separately).
All works upto plinth level

ShutteringCentering and shuttering including strutting, propping etc. and removal of

5 form SQM 21.915 2.000 43.830 48.213 284.85 13733.47305 4.3.1
work for :
Foundations, footings, bases for columns

Demolishing R.C.C. work manually/ by mechanical means including stacking

6 of steel bars and disposal of unserviceable material within 50 metres lead as CUM 6.250 23.750 26.125 2534.7 66219.0375 15.3
per direction of Engineer - in- charge.

7 Dismantling of existing chain link fencing and fixing the same on new location with all SQM 10.000 1.000 10.000 11.000 1500 16500
bye works to complete

Total Amount Including GST 297124.50928

 Dimentions size A B C spacing No of bar Dia of bar Cutting length(mtr) Total Cutting Length(mtr) Specific weight(KG/M) Total weight(kg)
1500*1500*250 RAFT(1500*1500*250)
a a 150 1400 150 200 8 10 1.66 13.28 0.617 8.194
c b 150 1400 150 200 8 10 1.66 13.28 0.617 8.194
b c 150 1400 150 200 8 10 1.66 13.28 0.617 8.194
d d 150 1400 150 200 8 10 1.66 13.28 0.617 8.194
RAFT(1560*1500*250)
a 150 1460 150 200 8 10 1.72 13.76 0.617 8.490
b 150 1400 150 200 8 10 1.66 13.28 0.617 8.194
c 150 1400 150 200 8 10 1.66 13.28 0.617 8.194
d 150 1460 150 200 8 10 1.72 13.76 0.617 8.490

Column(1560*770) 1200 2400 200 20 nose 20 20 3.68 73.6 2.47 181.792

Binder
690 0 690 200 12 8 0.82 9.816 0.395 3.877
1480 1480 0 12 8 1.608 19.296 0.395 7.622
1452*320 1452 320 12 8 3.608 43.296 0.395 17.102
956*690 956 690 12 8 3.356 40.272 0.395 15.907
468*690 468 690 12 8 2.38 28.56 0.395 11.281
710*690 710 690 12 8 2.864 34.368 0.395 13.575

column(1250*500) 1200 2400 200 20nose 12 20 3.72 44.64 2.47 110.261

Binder

420 0 420 200 12 8 0.436 5.232 0.395 2.067

1170 1170 0 12 8 1.266 15.192 0.395 6.001
1170*420 1170 420 12 8 3.244 38.928 0.395 15.377
367*420 367 420 12 8 1.614 19.368 0.395 7.650
Total steel(KG) 458.655
MT 0.459
 RCC
RAFT L B H QTY Cum
1560*1500*250 1560 1500 250 1 0.585
1500*1500*250 1500 1500 250 1 0.5625
COLUMN
1560*770*2650 1560 770 2400 1 2.883
1250*500*2500 1250 500 2250 1 1.406
Total 5.437

PCC
Raft L B H QTY Cum
1560*1500*250 1635 1575 100 1 0.258
1500*1500*250 1575 1575 100 1 0.248
Total 0.506

EW
RAFT L B H QTY Cum
1560*1500*250 2160 2100 2100 1 9.526
1500*1500*250 2100 2100 2100 1 9.261
Total 18.787

Shuttering
RAFT L H QTY SQM
1560*1500*250 1560 250 1 1.53
1500*1500*250 1500 250 1 0.380
COLUMN
1560*770*2650 1560 2400 1 11.184
1250*500*2500 1250 2250 1 7.875
Total 20.969

Dismantle L B H QTY Cum

2500*2500*250 2500 2500 250 4 6.25
S.No. Item Description Unit Qty Rate

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas
(exceeding 30 cm in depth, 1.5 m in width as well as 10
1 CUM 41.331 181.85
sqm on plan) including getting out and disposal of
excavated earth lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge. All kinds of soil.

Providing and laying in position ready mixed plain

cement concrete, using fly ash and cement content as
per approved design mix and manufactured in fully
automatic batching plant and transported to site of
work in transit mixer for all leads, having continuous
agitated mixer, manufactured as per mix design of
specified grade for plain cement concrete work,
including pumping of R.M.C. from transit mixer to site of
laying and curing, excluding the cost of centering,
shuttering and finishing, including cost of curing,
admixtures in recommended proportions as per IS :
2 9103 to accelerate/ retard setting of concrete, improve CUM 1.112 7598.7
workability without impairing strength and durability as
per direction of the Engineer-in-charge. Note : (1)
Excess/less cement used than specified in this item is
payable/ recoverable separately. (2) Fly ash conforming
to grade I of IS 3812 (Part-1) only be used as part
replacement of OPC as per IS : 456. Uniform blending
with cement is to be ensured in accordance with clauses
5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and
RMC. All works upto plinth level: M-10 grade plain
cement concrete (cement content considered @ 220
kg/cum)

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and
3 KGS 1009.000 83.5
binding all complete upto plinth level. For Thermo-
Mechanically Treated bars of grade Fe-500D or more
 Providing and laying in position ready mixed M-25 grade
concrete for reinforced
cement concrete work, using cement content as per
approved design mix,
manufactured in fully automatic batching plant and
transported to site of work in
transit mixer for all leads, having continuous agitated
mixer, manufactured as per
mix design of specified grade for reinforced cement
concrete work, including
pumping of R.M.C. from transit mixer to site of laying ,
excluding the cost of
4 centering, shuttering finishing and reinforcement, CUM 11.961 8398.65
including cost of admixtures in
recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete,
improve workability without impairing strength and
durability as per direction of
the Engineer-in-charge.
(Note :- Cement content considered in this item is @
330 kg/cum.Excess/less cement
used as per design mix is payable/recoverable
separately).
All works upto plinth level

ShutteringCentering and shuttering including strutting,

propping etc. and removal of form
5 SQM 48.213 284.85
work for :
Foundations, footings, bases for columns

Demolishing R.C.C. work manually/ by mechanical

means including stacking
of steel bars and disposal of unserviceable material
6 CUM 26.125 2534.7
within 50 metres lead as
per direction of Engineer - in- charge.

Removal of existing chain link fencing and stacking at

the safe location as per direction by engineer/engineer
7 SQM 11.000 1500
in charge and fixing the same on new location with all
bye works to complete

Total Amount Including GST

 Total

7516.04235

8449.7544

84251.5
100456.2527

13733.47305

66219.0375

16500

297126.06