Scribd
Upload
31 views1 page

PTW in Working at Height

The document is a work at height permit template for contractors in Vietnamese. It outlines safety requirements before, during, and after work at heights above 2 meters, including identifying hazards, using protective equipment, inspecting lifting devices, and more.

Uploaded by

bach.pham0932719192
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views1 page

PTW in Working at Height

The document is a work at height permit template for contractors in Vietnamese. It outlines safety requirements before, during, and after work at heights above 2 meters, including identifying hazards, using protective equipment, inspecting lifting devices, and more.

Uploaded by

bach.pham0932719192
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Translated from Vietnamese to English - www.onlinedoctranslator.

com

WORK AT HEIGHT PERMIT


No.

(*) This form applies to all repair/maintenance work performed at a height above 2m or below that height but there are dangerous obstacles below.

Company/Contractor:

Staff Part:
Work location

Detailed CV description:

Begin: …….…../……./……..Time: ……… AM/PM Emergency information:

End: . . . ….…../……./……..Time: ……… AM/PM Tel: : (028)3877 6470- Ext: 213 or 214

Requirements before starting: This voucher is valid for a maximum of 1 working day.

Request Perform
Topic Action

Identify potential hazards and fences surrounding the area.

Employees are trained in labor safety knowledge and safe operation of equipment.

Work place Check the safety of equipment before operating.

Post warning signs in construction areas.


There must be safety measures to ensure the safety of people, materials, equipment and structures in the operating area of
lifting equipment.
Personal protective equipment Working staff are fully equipped with labor protection equipment (gloves, masks, belts, etc.)

Device Lifting equipment must be inspected initially and periodically during use by a competent authority.
Cashew staff
Lifting equipment operators must receive specialized training and training and be issued a labor safety card.
control lifting equipment

Other

Requirements during work


Request Perform
Topic Action

Ensure adequate lighting and other safety requirements for lifting, moving loads, etc.

Work place Arrange enough people in the work area for each lifting device. At least 2 people when there is no general protection
People performing work at height must be equipped with safety belts or protective nets below; work is not allowed
without wearing a safety belt.
The person performing the work must ensure the safety of the equipment when the work does not continue (turn off the circuit breaker, lower the
When interrupted
elevator, etc.)
Public supervision
Continuously check the work area to ensure employees/Contractors comply with the above requirements

Other

Requirements upon completion:


Request Perform
Topic Action

Work area Move equipment out of work area.


job Clean the work area, remove original equipment and covers.

Move obstacles
End
Keep accident records, if any

Confirm work authorization


Date/
Parties involved Action Name Signature

Monitor the area The measures listed above can control possible hazards.
Contractors/ Work can only begin when all necessary safety measures have been taken and a supervisor is
Staff present.
RKW safety
The measures listed above can control possible hazards.
monitor

Confirm CV completion
Date/
Parties involved Action Name Signature

Fulfill the above requirements.


Contractor/Employee
RKW safety
Fulfill the above requirements.
monitor
Head of Department/Director
Fulfill the above requirements.
close to the area

P10/SAFETY/F3-Rev.01 Page 1

You might also like