Scribd
Upload
30 views

Lecture 9

Uploaded by

harsh garg
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Lecture 9

Uploaded by

harsh garg
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

ME-461, Manufacturing

Technology, Lecture 9
Instructor: Shantanu Bhattacharya
GVMM Chair and Professor
Department of Mechanical Engineering
Indian Institute of Technology Kanpur
Email: [email protected]
Tel: 05122596056
Feature Recognition In Computer Aided Process Planning
• Capp systems usually serve as a link between CAD and CAM.
• However, it is only a partial link, because most of the existing CAD/drafting
systems do not provide part feature information, which is essential data for
CAPP.
• CAPP systems do not understand the three dimensional geometry of the
designed parts for CAD systems in terms of their engineering meaning related
to manufacturing and assembly.
• This is commonly referred to as the feature recognition problem.
• For example the object shown in the solid geometry tree given below
represents a block primitive and a cylinder primitive combined by a Boolean
operator .
• The shape and dimension of the object are
uniquely defined by this scheme.
•However, some useful higher level information
such as whether the hole is a blind hole or a
through hole is not provided.
•This kind of information, defined in terms of
feature, is essential to process planning.
Feature recognition in computer aided process
planning
• From an engineering point of view, features are
regarded as generic shapes of objects with which
engineers associate certain attributes and knowledge
useful in reasoning about or describing the products.
• A generic part feature recognition system should be
able to:
1. Extract design information of a part drawn from a
CAD database.
2. Identify all surface of the part.
3. Recognize, reason about, and interpret these
surfaces in terms of part features.
Part feature recognition approaches
• A number of approaches to part feature recognition for
rotational as well as prismatic parts have been developed such
as syntactic pattern recognition, geometry decomposition,
expert system rule logic, graph based and set rhetoric out of
which Graph based approach will be explored here.
Graph based approach:
This usually consists of three basic steps:
•STEP1: Generating graph based representation of the object to be
recognized.
•STEP2: Defining part features.
•STEP3: Matching features in the graph representation.

1. In the first step, an object is represented by graph. This step is necessary because the
data extracted from the database are usually in the form of boundary representation
and are not directly usable for feature recognition.
2. In order to recognize a feature, the information regarding the type of face adjacency
and relationships between the sets of faces should be expressed explicitly.
3. To facilitate the recognition process the AAG (attributed adjacency graph) method is
used.
Definition of Attributed Adjacency Graph
• An AAG can be defined as a graph G = (N,A,T), where N is the
set of nodes, A is the set of arcs, and T is the set of attributes
to arcs in A such that:
• For every face f in F, there exists a unique node n in N.
• For every edge e in E, there exists a unique arc a in A,
connecting nodes ni to nj corresponding to face fi and face fj
which share the common edge e.
• Every arc a in A is assigned an attribute t, where:

t = 0 if the faces sharing the edge form a concave angle [inside


edge]
t= 1 if the faces sharing the edge form a convex angle [ outside
edge]
Definition of Attributed Adjacency Graph
• The AAG is represented in the computer in the
form of a matrix, which is defined as follows:
Definition of part features

• To achieve feature recognition, we first need to


define the feature precisely- that is , what shape
we think is a feature.
• Generally, we can define any shape as a feature;
however, only those that have manufacturing
meanings should be defined.
• Six commonly used features in manufacturing
are the step, slot, three side pocket, four side
pocket, pocket (or blind hole), and through hole.
Defining
features
Matching the feature
• After steps 1 and 2, the problem of recognizing machining features in part
changes to the problem of recognizing AAG subgraphs that represent the
features in the complete AAG graph representing the part.
• The problem of searching of subgraphs in a larger graphs is a subgraph
isomorphism problem and is computationally exhaustive and as such there
are no polynomial algorithms to do this.
• An algorithm that can be an alternative to isomorphism can be based on
the following observation: A face that is adjacent to all its neighboring faces
with convex angle (270 deg.) does not form part of a feature.
• This observation is used as a basis of separating the original graph into
subgraphs that could correspond to features.
• The separation is done by deleting some nodes of the graph. The delete
node rule is as follows:
If (all incident arcs of a node have attribute “1”)
Then (delete this node (and all the incident arcs at the node) from AAG)
• Because an AAG is represented in the form of a matrix in the program, the
delete node rule actually deletes rows and columns that represent the
nodes in the matrix.
Problem
• It is easy for the human to see that the part shown below has
a slot and a pocket feature. In this example, however, we
simulate the computer to apply the feature recognition
algorithm discussed earlier. We therefore, want to solve the
following:
(a)Develop the AAG of the object.
(b) Give the matrix representation of the AAG.
(c)Recognize the features in this object.
Solution
(a)The AAG is first developed as
shown below

(1) (4)
(7) (8) (9)
(2) (3) For the purpose of inputting the
(5) (6) (14) (10) AAG graph into the computer,
we have to convert the graph
(12) (11) into the matrix form. The matrix
(13)
(15) representation of AAG is given as
follows:

(4) (1)

(5)

(3) (2) (11) (12) (13)


Solution
Problem
• For the object shown below, use the graph based feature
recognition approach to achieve the following:
1. Develop the AAG of the object.
2. Give the matrix representation of AAG.
3. Recognize the features in this object

You might also like