BERM WIDTH VARIES ( 1000 MIN.

)
80 x 60 x 2.2 DIA. HANDRAILING
GALVANIZED AND PVC ( SEE STD. DRG. NO. C2103 )
COATED DOUBLE TWISTED
WIRE MESH 50 THICK MASONRY FACING ON 50 MIN. THICK CEMENT MORTAR 200
( SET IN 1 : 3 CEMENT / SAND ), OR 75 THICK CONCRETE APRON,
AS SPECIFIED; ALL TO BE OMITTED IF THIS AREA IS SPRAYED CONCRETE

1000
EXTENT OF WIRE MESH SHALL
BRUSHED FINISH OR AS BE 1 500 OR BERM WIDTH
75 THICK OTHERWISE DIRECTED 25 x 25
WHICHEVER IS THE LESSER
CONCRETE SLAB CHAMFER
25 x 25
150 CHAMFER
A252 MESH

200

300
100
FINISHED SLOPE

50
0
PROFILE
20

FIXING
0

50
300
PIN 1
10

MIN.
H/ 2 POLYTHENE SHEET

E
NON-BIODEGRADABLE
EROSION CONTROL MAT
2
H/

POLYTHENE
50 MIN. THICK SHEET DETAILS OF BERM

B
CEMENT MORTAR
WITH HANDRAILING

15
T H T

2
H/
U-CHANNELS CONSTRUCTED

B
ON BERM
T H T

80 x 60 x 2.2 DIA. GALVANIZED AND PVC

COATED DOUBLE TWISTED WIRE MESH HALF-ROUND CHANNEL
NON-BIODEGRADABLE
EROSION CONTROL MAT
FINISHED NOTES:
SLOPE
PROFILE 1. ALL DIMENSIONS ARE IN MILLIMETRES.
50
0

2. ALL CONCRETE TO BE GRADE 20 / 20.

20

FIXING
0

3. CONCRETE SURFACE FINISH SHALL BE

PIN 50 THICK MASONRY FACING ON 50 MIN. THICK CLASS U2, F2 OR BRUSHED FINISH
CEMENT MORTAR ( SET IN 1 : 3 CEMENT / SAND ), AS DIRECTED.
50 MIN. THICK
OR 75 THICK CONCRETE APRON, AS SPECIFIED;
CEMENT MORTAR
ALL TO BE OMITTED IF THIS AREA IS SPRAYED 4. SPACING OF EXPANSION JOINT IN
CONCRETE CHANNELS, BERM SLABS AND APRONS
TO BE 10 METRES MAXIMUM, SEE STD.
D

DRG. NO. C2413 FOR DETAILS.

15
E

50

5. JOINTS FOR CHANNELS, BERM SLABS,

0
MIN.

APRONS AND WALLS, ETC. TO BE

H/ 2

ON THE SAME ALIGNMENT.

80 x 60 x 2.2 DIA. GALVANIZED
50 DIA. PVC PIPES AND PVC COATED DOUBLE 6. FOR DIMENSIONS T, H, & B, SEE TABLE
2
H/

AT 1500 c / c WITH TWISTED WIRE MESH BELOW.

20

FALL OF 1 ON 3 NON-BIODEGRADABLE
0

7. BIODEGRADABLE EROSION CONTROL MAT IF

WHERE D>600 EROSION CONTROL MAT REQUIRED, SEE STD. DRG. NO. C2511/1E.

8. CONCRETE TO BE COLOURED AS SPECIFIED.

T H T
FIXING PIN
9. CONCRETE U-CHANNEL CAN BE CAST IN-SITU
50 MIN. THICK OR PRECAST CONCRETE SUBJECT TO THE
ENGINEER’S AGREEMENT ON THE DETAILS.
CEMENT MORTAR
10. DETAILS OF EROSION CONTROL MAT AND
U-CHANNELS NOT CONSTRUCTED WESH MESH ON BERM. (SEE STD DRG. NO.
C2511/1E)
ON BERM
I MINOR AMENDMENT. Original Signed 07.2018
NOMINAL SIZE THICKNESS OF MASONRY
T B REINFORCEMENT Original Signed 01.2005
H
H FACING AMENDED.

G MINOR AMENDMENT. Original Signed 01.2004

300 80 100 A252 MESH PLACED F GENERAL REVISION. Original Signed 12.2002
CENTRALLY AND T=100
E DRAWING TITLE AMENDED. Original Signed 11.2001
375 - 600 100 150 WHEN E>650
D MINOR AMENDMENT. Original Signed 08.2001
A252 MESH PLACED C 150 x 100 UPSTAND ADDED AT BERM. Original Signed 6.99
675 - 900 125 175
CENTRALLY B MINOR AMENDMENTS. Original Signed 3.94
REF. REVISION SIGNATURE DATE

DETAILS OF HALF-ROUND CIVIL ENGINEERING AND

DEVELOPMENT DEPARTMENT
AND U-CHANNELS ( TYPE A - SCALE 1 : 25 DRAWING NO.
WITH MASONRY APRON ) DATE JAN 1991 C2409I
¤V¶u⁄{ We Engineer Hong Kong’s Development