AMDLA4530Q AUTOMOTIVE MOLDED INDUCTOR

LLC

Request Samples Check Inventory

FEATURES
• AEC-Q200 Qualified AEC-Q200

• Shielded construction
QUALIFIED

ISO
• Soft saturation 9001:2015

• Low DCR per cubic mm

CERTIFIED

• Designed for switching frequencies between Pb

100KHz-2MHz
ROHS
COMPLIANT

ELECTRICAL SPECIFICATIONS @ 25°C GENERAL

DC RESISTANCE
SPECIFICATIONS
INDUCTANCE TOLERANCE IRMS ISAT
PART NUMBER*
(uH) (%) (A) (A)
(mΩ)
TYPE Operating Temperature:
TYP MAX -55°C to +155°C with (40°C rise) Irms
AMDLA4530Q-R10NT 0.10 30 32 32 1.8 2.1 Lead Frame current.
AMDLA4530Q-R12NT 0.12 30 30 30 2.0 2.3 Lead Frame
AMDLA4530Q-R22MT 0.22 20 18 17 2.8 3.2 Lead Frame
Maximum Part Temperature: +155°C
AMDLA4530Q-R35MT 0.35 20 16.5 15 4.6 5.1 Lead Frame Components Storage Temperature:
AMDLA4530Q-R47MT 0.47 20 16 11 5.5 6.4 Lead Frame -55°C to +125°C
AMDLA4530Q-R68MT 0.68 20 12 9.0 7.0 8.4 Lead Frame Tape and Reel Packaging
AMDLA4530Q-1R0MT 1.0 20 8.5 8.5 12.8 13.8 Lead Frame
Temperature: -55°C to +80°C
AMDLA4530Q-1R2MT 1.2 20 7.2 7.6 14 16 Lead Frame
AMDLA4530Q-1R5MT 1.5 20 6.6 6.3 16 21 Lead Frame MSL: Level 1
AMDLA4530Q-2R2MT 2.2 20 6.0 5.7 23 27.6 Lead Frame
AMDLA4530Q-3R3MT 3.3 20 5.5 5.0 30 36 Lead Frame
AMDLA4530Q-4R7MT 4.7 20 5.0 4.0 43 52 Lead Frame MATERIALS
* Please refer to Part Identification section Core: Metal Alloy
Test Conditions
Wire: Copper
Inductance: 100 kHz, 1 V, 0 Adc Terminal: Tin Plating
Humidity Range: 85 ± 2% RH Ink: Black
Temperature Rise Current: Current measured at Δ T of 40°C
Saturation Current: Current measured at Δ L of 30%

PRODUCT DIMENSIONS
PART BUILDER 4.9 ± 0.30 1.0 ± 0.3

1.5 ± 0.2
AMDLA4530Q 1R0 M T
4.7 ± 0.2

Series Inductance* Tol. 1 Packaging 2

1. Tolerance: M = 20% 2. Packaging: B = Bulk Top View Bottom View

N = 30% T = Tape and Reel (1,000pcs/reel)

2.8 ± 0.2

*Refer to Electrical Specification table

Front View Side View

RECOMMENDED LANDING PATTERN

5.5
1.8

2.5
Dimensions: mm

LLC Revised 05/01/20

AMDLA4530Q AUTOMOTIVE MOLDED INDUCTOR
™

LLC

RECOMMENDED REFLOW PROFILE

3
Tp
Tp Critical Zone

Ramp Up
TL to Tp

TL
TSMAX TL
Temperature

TSMIN

Ramp Down
Preheat

1 2
25
t 25˚C to Peak

Time

ZONE DESCRIPTION TEMPERATURE TIMES

Tsmin ~ Tsmax
1 Preheat 60 ~ 180 sec.
150°C ~ 200°C
TL
2 Reflow 60 ~ 150 sec.
217°C
TP
3 Peak Heat 10 sec. MAX
260°C

LLC Revised 05/01/20

AMDLA4530Q AUTOMOTIVE MOLDED INDUCTOR
™

LLC

PACKAGING
Tape and Reel: 1,000
Units per Carton: 8,000
T&R per Carton: 8
Weight per Carton: 7.9 kg
Weight per Unit: 0.34 g
Carton Dimensions: 410 x 325 x 415 mm

TYPE A B C D
13” x 16 mm 16.4 +2/-0 100.0 ± 2.0 13.0 +0.5/-0.2 330.0

B0 A0 K0 P W F T D
5.3 ± 0.1 5.0 ± 0.1 3.3 ± 0.1 12.0 ± 0.1 16.0 ± 0.3 5.5 ± 0.1 0.35 ± 0.05 1.5 ± 0.1
Dimensions: mm

This product is commercial off-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent
medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result
in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for
more information.

™ Headquarters:
5101 Hidden Creek Ln Spicewood TX 78669
LLC
Phone: 512-371-6159 | Fax: 512-351-8858
Revised 05/01/20