Compass® Controller Spare Parts Leaflet

NGH Passenger 10-AAA25300AK

Interface August 10, 2022 / Page 1 of 12

SERVICE ENGINEERING
This document does not contain any Otis Elevator Company
technical data subject to EAR or ITAR Bloomfield, Connecticut USA
Unpublished Work—© Otis Elevator Co.; 2022
 10-AAA25300AK History
Leaflet Description
The Compass® controller enclosure contains the group dispatcher board and software, along with the network
components required to communicate to the input devices located throughout the building. The controller can
be installed in the machine room floor or wall or in the hoistway off the rail. The controller is connected to the
car controllers via the RS422 ring or CAN bus. Arrangements of the controller are used to supply extra power
and Ethernet connections.

Leaflet Revisions
Subject Matter
Date Revised Reason for Revision
Expert
July 14, 2010 Bennie Murah New SPL
pp 3, 4 swap ref. nos.. pp 3–5 part AAA621AN21
April 20, 2011 Bennie Murah
supersedes AAA621AN10 and added GoEntry®
September 17, 2014 Bennie Murah Added support for AAA25300AK13 & AK14 (pp. 4 and 10)
September 14, 2016 Peter Depaola Updated to include ABA vintage information
November 20, 2019 Paul Stranieri Updated to include ABA25300AK17-23 (pp. 6, 7, and 8)
August 10, 2022 Paul Stranieri Updated to include ACA25300AK24 on new p. 12

Related Drawings
Drawing No. Title Drawing No. Title
AAA639CV
Passenger Interface Touch
AAA29501H AAA639DS NGH Passenger Interface Keypad
Screen Keypad
XAA23505A
AAA29501G
XAA23505B Passenger Interface Touchpad AAA29501AA Passenger Interface Touch Screen
XAA23505C
NGH Passenger Interface, XAA23505D Passenger Interface Pedestal small /
AAA29000AG
System Level XAA23505E large

Related Documents
Document ID Title
SPL 40-AAA29000AG NGH Passenger Interface, System Level SPL
SPL 10-AAA25300Y NGH Passenger Interface, Redirector
SPL 10-AAA25300S NGH Passenger Interface, 4-Port Pit Box

Subject Matter Expert

Name Department
Paul Stranieri Otis Engineering Center, Farmington

About Spare Parts Leaflets…

This document lists the lowest replaceable units (LRUs) for the standard version of the product. The LRUs are chosen by a team of
Otis associates representing engineering and manufacturing.
While goal of this document is to make parts identification as easy as possible, the document cannot be all-inclusive. Elevator and
escalator contracts classified as “special” or “custom” are not addressed here. For such contracts, please refer to specified information,
the contract folder, TIPs, Field Education Articles, Construction Letters, etc. for further information.
If you have any suggestions about this document, please contact the subject matter expert listed on this page.

Page 2 August 10, 2022 This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
 7-Port Controller, A**25300AK1, 10-AAA25300AK
12-Port Controller, A**25300AK2

AAA25300AK ABA25300AK

REF. No. PART No. DESCRIPTION

AAA639DQ1
1 Computer, Layer-2 8-Port Ethernet Switch
AAA639DQ2
AAA639CS10
Computer, Server, 512 MB RAM (w/o compact flash)
AAA639CS14
2 (includes USB flash drive AAA640P2 & USB extension cable
AAA639CS16
AAA174CBV1)
AAA639CS17
EEPROM, 512K-Bit Serial (SPI bus), 8-Pin DIP (Blank),
3 AAA616NL31
See TIP 1.1.22.1-1
4 AAA375BR25 Fuse, 8A, Time Delay
5 AAA29502F2 Patch Panel Assembly, Single
JEA26807CBN23
--- PC Board, GECB/GPCB-IO (RS422 Ring), See NOTE 1
6 JFA26807CBN23
JHA26807CBN23 PC Board, GECB-V2/GPCB-IO (RS422 Ring), See NOTES 1 & 2
7 AAA621AN5 AAA621AN26 Power Supply, 5 V, 30W
AAA621AN18 AAA621AN33 Power Supply, 48 V, 100W ( 7-port A**25300AK1) See
8 NOTE 3
AAA621AN10
AAA621AN32 Power Supply, 48 V, 300W ( 12-port A**25300AK2)
AAA621AN21
NOTE 1: When replacing this PC board assembly, remove and retain the 8-pin socketed EEPROM (ref. 3) from the existing processor
board or your contract data will be lost.
NOTE 2: The GECB-V2 requires AAA31362CAD or later software. If required to load software, contact OSC Customer Service.
NOTE 3: When replacing the AAA vintage power supplies, order new mounting plate p/n AAA105RD2 in addition to the replacement
power supply.

This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
August 10, 2022 Page 3
 10-AAA25300AK 23-Port Controllers, A**25300AK3-5
GoEntry® Controller, A**25300AK12

AAA25300AK ABA25300AK
REF.
PART No. DESCRIPTION
No.
AAA639CT1
1 AAA639EL2 Computer, 24-Port Ethernet Switch
AAA27076HK1
AAA639CR1
2 AAA639CR3 Computer, Fiber Optic Module ( A**25300AK4 & AK5)
See NOTE 1
AAA639CS10
Computer, Server, 512 MB RAM (w/o compact flash)
AAA639CS14
3 (includes USB flash drive AAA640P2 & USB extension cable
AAA639CS16
AAA174CBV1)
AAA639CS17
4 GAA176HY5 Connector, 5-Circuit ( A**25300AK5)
EEPROM, 512K-Bit Serial (SPI bus), 8-Pin DIP (Blank),
5 AAA616NL31
See TIP 1.1.22.1-1
6 AAA375BR25 Fuse, 8A, Time Delay
7 AAA29502F1 Patch Panel Assembly, Double
JEA26807CBN24 PC Board, GECB/GPCB-IO,
---
JFA26807CBN24 See NOTE 1 on p. 3
CAN Ring A**25300AK5
PC Board, GECB-V2/GPCB-IO,
--- JHA26807CBN24
See NOTES 1 and 2 on p. 3
8
JEA26807CBN23 PC Board, GECB/GPCB-IO,
---
JFA26807CBN23 See NOTE 1 on p. 3 RS422 A**25300AK3,
PC Board, GECB-V2/GPCB-IO Ring AK4 & AK12
--- JHA26807CBN23
See NOTES 1 and 2 on p. 3
AAA21700AM1 PC Board, SP14 ( GoEntry®, A**25300AK12)
9
JAA26807BLB1 PC Board, CBTB, CAN Terminator ( A**25300AK5)
AAA621AN10
10 AAA621AN32 Power Supply, 48 V, 300W
AAA621AN21 See NOTE 3 on p. 3
11 AAA621AN5 AAA621AN26 Power Supply, 5 V 30W
NOTE 1: If replacing p/n AAA639CR1, order upgrade kits AAA27076HK5 (fiber optic) and p/n AAA27076HK1
(switch).

Page 4 August 10, 2022 This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
 9-Port Controllers, A**25300AK14-16 10-AAA25300AK

AAA25300AK ABA25300AK
REF.
PART No. DESCRIPTION
No.
1 --- AAA29502F2 Assembly, Patch Panel, Single
--- AAA639EA7 Computer, Layer-3 Ethernet Switch ( A**25300AK14)
AAA639EA2
AAA639EA8 Computer, Layer-3 Ethernet Switch ( A**25300AK15, labeled “A”)
2 AAA27076HK2
AAA639EA3
AAA639EA9 Computer, Layer-3 Ethernet Switch ( A**25300AK16, labeled “B”)
AAA27076HK3
AAA639CS10 Computer, Server, 512 MB RAM (w/o compact flash) See NOTE 1
AAA639CS14 (includes USB flash drive AAA640P2 & USB extension cable
3
AAA639CS16 AAA174CBV1)
AAA639CS17
4 AAA375BR25 Fuse, 8A, Time Delay
AAA621AN10
5 AAA621AN32 Power Supply, 48V, 300W, See NOTE 3 on p. 3
AAA621AN21
NOTE 1: Server in box “A” must be setup with IP address 192.168.10.250.
Server in box “B” must be setup with IP address 192.168.20.250.

This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
August 10, 2022 Page 5
 10-AAA25300AK 12-Port Controllers, A**25300AK17-18

AAA25300AK ABA25300AK
REF.
PART No. DESCRIPTION
No.

1 --- AAA29502F1 Assembly, Patch Panel, Dual

--- AAA639EA12 Computer, Layer-3 Ethernet Switch ( A**25300AK17, labeled “A”)
2
--- AAA639EA13 Computer, Layer-3 Ethernet Switch ( A**25300AK18, labeled “B”)
Computer, Server, 512 MB RAM (w/o compact flash) See NOTE
3 --- AAA639CS17 (includes USB flash drive AAA640P2 & USB extension cable
AAA174CBV1)
4 --- AAA375BR25 Fuse, 8A, Time Delay
5 --- AAA621AN32 Power Supply, 48V, 300W

NOTE: Server in box “A” must be set up with IP address 192.168.30.250.

Server in box “B” must be set up with IP address 192.168.40.250.

Page 6 August 10, 2022 This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
 12-Port Controllers, A**25300AK19-20 10-AAA25300AK

AAA25300AK ABA25300AK
REF.
PART No. DESCRIPTION
No.

1 --- AAA29502F1 Assembly Patch Panel, Dual

--- AAA639EA12 Computer, Layer-3 Ethernet Switch ( A**25300AK19, labeled “A”)
2
--- AAA639EA13 Computer, Layer-3 Ethernet Switch ( A**25300AK20, labeled “B”)
3 --- AAA375BR25 Fuse, 8A, Time Delay
4 --- GAA26800SG3 PCB Assembly, Server, See NOTE
5 --- AAA621AN32 Power Supply, 48V, 300W
6 --- AAA621AT27 Power Supply, 24V, 60W

NOTE: Server in box “A” must be set up with IP address 192.168.30.250.

Server in box “B” must be set up with IP address 192.168.40.250.

This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
August 10, 2022 Page 7
 10-AAA25300AK 9-Port Controllers, A**25300AK21-23

AAA25300AK ABA25300AK
REF.
PART No. DESCRIPTION
No.

1 AAA29502F2 Assembly, Patch Panel, Single

--- AAA639EA7 Computer, Layer-3 Ethernet Switch ( A**25300AK21)
2 --- AAA639EA8 Computer, Layer-3 Ethernet Switch ( A**25300AK22, labeled “A”)
--- AAA639EA9 Computer, Layer-3 Ethernet Switch ( A**25300AK23, labeled “B”)
3 --- AAA375BR25 Fuse, 8A, Time Delay
4 --- GAA26800SG3 PCB Assembly, Server, See NOTE
5 --- AAA621AN32 Power Supply, 48V, 300W
6 --- AAA621AT27 Power Supply, 24V, 60W

NOTE: Server in box “A” must be set up with IP address 192.168.10.250.

Server in box “B” must be set up with IP address 192.168.20.250.

Page 8 August 10, 2022 This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
 23-Port Auxiliary Controllers, 10-AAA25300AK
A**25300AK6, 7

AAA25300AK ABA25300AK

REF. No. PART No. DESCRIPTION

AAA639CT1
1 AAA639EL2 Computer, 24-Port Ethernet Switch
AAA27076HK1
AAA639CR1
2 AAA639CR3 Computer, Fiber Optic Module
See NOTE 1 on p. 4
3 AAA375BR25 Fuse, 8A, Time Delay
4 AAA29502F1 Patch Panel Assembly, Double
AAA621AN10
5 AAA621AN32 Power Supply, 48 V, 300 W, See NOTE 3 on p. 3
AAA621AN21

This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
August 10, 2022 Page 9
10-AAA25300AK 24-Port Expansion (Pit) Box
A**25300AK8–11

AAA25300AK ABA25300AK

REF. No. PART No. DESCRIPTION

AAA21305BJ1 Computer, 24-Port Ethernet Switch (modified for DC
1 AAA21305EZ2
AAA27076HK4 power)
AAA639CR1 Computer, Fiber Optic Module
2 AAA639CR3
See NOTE 1 on. p. 4 ( 24-port controller A**25300AK8 and AK10)
3 AAA29502F1 Patch Panel Assembly, Double ( A**25300AK3-12)

Page 10 August 10, 2022 This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
24-Port Expansion Box, A**25300AK13 10-AAA25300AK

AAA25300AK ABA25300AK

REF. No. PART No. DESCRIPTION

AAA639EA2
1 AAA639EA8 Computer, 24-Port Layer-3 Ethernet Switch
AAA27076HK2
2 AAA375BR25 Fuse, 8A, Time Delay

This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022
August 10, 2022 Page 11
 10-AAA25300AK 23-Port Controller, A**25300AK24

ACA25300AK
REF. No. PART No. DESCRIPTION
1 AAA639EL2 Computer, 24-Port Ethernet Switch
2 AAA639CR3 Computer, Fiber Optic Module (optional)
3 GAA26800SG3 Computer, Server
4 AAA616NL31 EEPROM, 512K-Bit Serial (SPI bus), 8-Pin DIP (Blank), See TIP 1.1.22.1-1
5 AAA375BR25 Fuse, 8A, Time Delay
6 AAA29502F1 Patch Panel Assembly, Double
PC Board, GECB/GPCB-IO,
7 JHA26807CBN19 CAN/RING
See NOTE 1 on p. 3
8 JAA26807BLB1 PC Board, CBTB, CAN Terminator (optional)
9 AAA621AN32 Power Supply, 48 V, 300W
10 AAA621AN47 Power Supply, 24 V 75W

Page 12 August 10, 2022 This document does not contain any technical data subject to EAR or ITAR
Unpublished Work—Otis Elevator Co., 2022