Scribd
Upload
80 views

Basic Electrical Engineering Lab 2

The document describes a laboratory experiment on series and parallel AC circuits. It provides instructions on building and comparing a series circuit and a parallel circuit using common electrical components like wires, light bulbs, switches and plugs. Safety procedures and assessment criteria are also outlined.

Uploaded by

Jomar Dacles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
80 views

Basic Electrical Engineering Lab 2

The document describes a laboratory experiment on series and parallel AC circuits. It provides instructions on building and comparing a series circuit and a parallel circuit using common electrical components like wires, light bulbs, switches and plugs. Safety procedures and assessment criteria are also outlined.

Uploaded by

Jomar Dacles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Republic of the Philippines

POLYTECHNIC UNIVERSITY OF THE


PHILIPPINES
Institute of Technology

LABORATORY 2

Series and Parallel AC Circuit


What is a Series Circuit?
A circuit is said to be connected in series when the same current flows through
all the components in the circuit. In such circuits, the current has only one path.
Let us consider household decorative string lights as an example of a series
circuit. This is nothing but a series of multiple tiny bulbs connected in series. If
one bulb fuses, all the bulbs in the series do not light up.

What is a Parallel Circuit?


A circuit is said to be parallel when the electric current has multiple paths to
flow through. The components that are a part of the parallel circuits will have a
constant voltage across all ends.

Purpose:
1. To observe and compare a series circuit and a parallel.

ASSESSMENT CRITERIA:
2. Safety procedures are followed.
3. Correct procedures for series and parallel
connections.
4. On-going checks of quality of work are undertaken in
accordance with instructions and requirements

CONDITION:
 Tools/Equipment
1. Safety Goggles
2. Safety Gloves
3. Combination Pliers
4. Long Nose Pliers
5. Side Cutting Pliers
6. Blade Cutter
7. Wire Stripper
8. Multi-meter Tester

Applied Electrical Engineering Technology


Republic of the Philippines
POLYTECHNIC UNIVERSITY OF THE
PHILIPPINES
Institute of Technology

Materials Size Quantity Image

Stranded Conductor 2 meters (Red)


(THHN) 2.0mm 2
2meters (Black)

Fit
Receptacle To 3 (pcs)
Bulb
Light Bulb Fit
(9watts, 4000K) To 3 (pcs)
Receptacle

Light Switch Refer


(Omni Brand) To 1 (pc)
Image

Electrical Male Plug Refer


(Omni Brand) To
Image 1 (pc)

Electrical Tape Refer


(Armak Brand) To 1 (pc)
Image

Prepared by:

Engr. Jomar J. Dacles, RME, REE, SO2

Applied Electrical Engineering Technology


Republic of the Philippines
POLYTECHNIC UNIVERSITY OF THE
PHILIPPINES
Institute of Technology
Procedures:

Applied Electrical Engineering Technology

You might also like