Scribd
Upload
30 views

Specification Sheet: Specifications TC10B

This document provides specifications for the Tamson Circulator 10 Litres model TC10B. It details key features such as a temperature range up to 200°C, precision temperature control to ±0.02°C, safety features including over-temperature protection, and optional accessories like a leveling platform and communication capabilities.

Uploaded by

Carlos Alberto Salazar Duque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Specification Sheet: Specifications TC10B

This document provides specifications for the Tamson Circulator 10 Litres model TC10B. It details key features such as a temperature range up to 200°C, precision temperature control to ±0.02°C, safety features including over-temperature protection, and optional accessories like a leveling platform and communication capabilities.

Uploaded by

Carlos Alberto Salazar Duque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Tamson Instruments

Specification sheet
Specifications TC10B
Tamson Circulator 10 Litres

Item Unit TC10B


P/N 00T0150
230V/50-60Hz
P/N 00T0155
115V/60Hz
Power [kW] 1.2
Used materials
Stainless steel
inside bath
Range ambient .. +200C
ambient.. +392F
Reading Standard C, F on request
Setting [°] 0.1
Stability ± [°C] Better than 0.02
Heating [kW] 1.1 (one heater)
Bath volume [L] 10
Pump pressure [mBar] 300 max
Pump cap. [L/min] 7.5 max
Opening [mm] 185 x 200 (round edge)
Depth bath [mm] 150
Completely stainless steel Length [mm] 440
Compact, small footprint Width [mm] 250
Auto tuning, high precision Height [mm] 440
Fluid level detection Weight [mm] 11
Easy to operate
CE Conforms to CE regulations
TC10B

General Safety
The TC10B can be used both as circulator or bath. The bath conforms to CE regulation. Further it is
The bath fluid is heated via a microprocessor equipped with multiple safety features in order to
controlled heating element. When working below guarantee safe around the clock operation. A
ambient temperature cooling fluid can be circulated mechanical safety thermostat protects the bath against
through the cooling to lower the bath temperature. high temperatures and will automatically reset itself
after switching the bath off and on again. The safety
The bath is equipped with fluid level detection. The thermostat can be set between ambient and +300°C.
microprocessor controlled heating with auto tune In case of over-temperature, electronics and motor are
function guarantees precise temperature control. switched-off. The pump motor is protected against
mechanical overload via a resettable fuse.
Span
The bath temperature can be set to a maximum of Temperature readout
200C (392F) in steps of 0.1degree. The overall Standard available in C, on request in F.
system accuracy is  0.02°C.
Pump
Accessories A pump circulates the bath content or provides
Top lid is included. external circulation. The pump pressure is 300 mBar
and maximum flow is 7 litres per minute with no
Options counter pressure.
P/N 03T0017 Leveling platform.
P/N 02T3025 RS232 communication.

Free TamCom® Program see www.tamson.com

Tamson Instruments bv 31 105 22 43 73 [email protected] www.tamson.com


Rev 1.1 - "17

You might also like