Scribd
Upload
2K views

Construction Method Statement Replacement of Gutter

The document outlines the procedures for replacing existing gutters, including removing the old gutters, inspecting for damage, installing new gutters, testing the new system, and cleaning up. Safety precautions like PPE and fall protection are also described.

Uploaded by

Jomar Bienes
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Construction Method Statement Replacement of Gutter

The document outlines the procedures for replacing existing gutters, including removing the old gutters, inspecting for damage, installing new gutters, testing the new system, and cleaning up. Safety precautions like PPE and fall protection are also described.

Uploaded by

Jomar Bienes
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Construction Method Statement: Replacement of Existing Gutter

I. Introduction

This method statement outlines the procedures and safety measures to be followed during the
replacement of the existing gutter at BKI Studio and Single Detached Houses. The work will be carried out
in compliance with relevant health and safety regulations and industry best practices.

II. Scope of Work:

The scope of work includes the following tasks:

- Removal of existing guttering

- Inspection of the fascia and soffit for any damage or deterioration

- Installation of new guttering system

- Testing and commissioning of the new guttering system

- Site cleanup and disposal of waste materials

III. Materials and Equipment

- New guttering system

- Ladder or scaffolding

- Personal Protective Equipment (PPE) including safety helmets, gloves, and harnesses

- Hand tools (e.g., screwdrivers, wrenches)

- Power tools (e.g., drills)

- Sealant and adhesive

- Waste disposal containers

IV. Health and Safety Precautions

- All personnel involved in the work must undergo a safety induction.

- Adequate PPE must be worn at all times.

- Ensure that the work area is cordoned off and warning signs are displayed to prevent unauthorized
access.
- Use of appropriate fall protection measures when working at height.

- Regular inspection of tools and equipment to ensure they are in safe working condition.

V. Methodology

1. Site Preparation:

- Erect safety barriers around the work area.

- Set up ladders or scaffolding to access the guttering.

- Ensure all necessary materials and equipment are readily available.

2. Removal of Existing Guttering:

- Carefully remove the existing guttering, taking care to avoid damage to the fascia and soffit.

- Dispose of old guttering in accordance with local waste disposal regulations.

3. Inspection:

- Inspect the fascia and soffit for any signs of damage or decay.

- Make any necessary repairs before proceeding with the installation of the new guttering.

4. Installation of New Guttering:

- Measure and cut the new guttering to the required lengths.

- Install brackets at regular intervals along the fascia to support the guttering.

- Attach the guttering to the brackets using screws or clips.

- Ensure that the guttering has the correct fall to allow for proper drainage.

- Seal joints and connections with appropriate sealant to prevent leaks.

5. Testing and Commissioning:

- Run water through the guttering system to check for leaks or blockages.

- Make any necessary adjustments to ensure proper drainage.


6. Site Cleanup:

- Remove all debris and waste materials from the site.

- Dispose of waste in accordance with local regulations.

- Leave the site in a clean and tidy condition.

VI. Quality Assurance

- Regular inspections will be conducted throughout the project to ensure that work is being carried
out to the required standards.

- Any defects or deviations from the specifications will be rectified promptly.

VII. Conclusion

This method statement outlines the procedures to be followed during the replacement of the existing
guttering. Adherence to these procedures will help ensure the safe and successful completion of the
project.

You might also like