Scribd
Upload
66 views2 pages

Fuelpower Soot Remover 25 KG

FUELPOWER SOOT REMOVER 25 KG

Uploaded by

azzrizalz1470
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views2 pages

Fuelpower Soot Remover 25 KG

FUELPOWER SOOT REMOVER 25 KG

Uploaded by

azzrizalz1470
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Last updated: 15/03/2024 17:34:08

FUELPOWER SOOT REMOVER 25 KG


Product group: 650 Product number: 779115

Unitor™ FuelPower™ Soot Remover will keep your boiler free from soot and ash deposits. It will remove deposits in the
exhaust system in the boiler and keep it clean so intervals between cleaning can be extended.

Product information
If deposits are allowed to form on boiler heat exchangers, the loss of efficiency can be directly related to extra fuel consumption. A 1 mm deposit is
approximately equivalent to a 10% efficiency loss, a 3 mm deposit can reduce efficiency by up to 50%. The normal ignition temperature of soot is
around 600°C. This means that it is burned only in the hottest parts of the boiler or diesel exhaust systems. Due to the catalytic action of Unitor
FuelPower Soot Remover, the ignition temperature of the soot/deposit is reduced to less than 280°C. The carbon deposits are thus ignited, leaving
an easily removed ash. The use of Unitor FuelPower Soot Remover not only provides greater fuel efficiency, but also prevents acid formation in
areas where severe corrosion could result in expensive damage, i.e. heat exchangers, superheaters, economisers, exhaust paths/stacks.

Features
Reduces cold-end corrosion
Assists soot blowing
Keep boiler clean from soot and deposits

Benefits
Longer time between cleaning intervalls
Saves you money by improving heat transfer
Saves you money by increasing boiler efficiency

Specification
General Physical properties

Invent Hazard Material (IMO/EU) classification C-49 Appearance Blue green


Density [kg/m3] 1,2 - 1,4
Form Dry powder

Technical data

Not Compatible If moist, may attack mild steel, iron and aluminium

Documents
Soot Remover

Directions for use


Dosage and control FuelPower Soot Remover should be introduced to the boiler through a suitable port, preferably with a blower, ensuring that the powder is spread
through the flame path towards the back of the combustion chamber. For Diesel engines, inject FuelPower Soot Remover directly into the exhaust system upstream of the
area to be treated. FuelPower Soot Remover is preferably dosed using Unitor's Fixed Injector, product No. 572073 and/or Portable Injector, product No. 572065.

Steam Raised Boiler Fuel Dose Rate

(tons/hr) (tons/day) (kg/day)

Boiler
3 5.5 1.0
6 11 2.0
9 16 3.0
12 21 3.5
15 27 4.0
23 41 4.5
31 55 5.0
46 82 5.5
62 110 6.5

Related products
Accessories
572073
FIXED INJECTOR
572065
PORTABLE SOOT INJECTOR
Is frequently bought together with
673154
UNITOR EASYSHIP COMBINED TEST KIT
735748
UNITOR CATALYTIC FINES TEST KIT
778848
FUELPOWER SOOT REMOVER LIQUID PLUS 25LTR

This page is printed from:


https://www.wilhelmsen.com/product-catalogue/products/marine-chemicals/fuel-oil-chemicals/heavy-fuel-oil-treatment/fuelpower-soot-remover-25-kg/

You might also like