Data Sheet : Induction Motor

s Champion Series
Motor Type : 1SE0 130-4NA86
Number of Phases 3
Rated Output kW 5.5
Rated Voltage V 415
Rated Current A 11 Reference Standard IS:12615
Rated Speed rev/min 1449 Enclosure IS:4691 IP55
Rated Frequency Hz 50 Cooling IS:6362 IC411
Rated Torque 3.7 kgf.m / 36 Nm Duty S1
100% load % 87.7 Type 1XB0 132
Efficiency : 75% load % 87.7 Terminal Terminal Size M5
50% load % 87.2 Box No. of Terminals 6
100% load % 0.83 Data Max. Cable
Power Factor : 75% load % 0.77 Section mm² 2R 3½C 16mm²
50% load % 0.66 Drive End 6208ZZ
Insulation Class F Non-Drive End 6208ZZ
Bearing
Temperature rise (Res.method) K 70
Data
Lubrication Pre-Lubricated
Life L10 hrs. # 50,000
Locked rotor Hot (s) 8 Lifting eyebolt IS:4190 M10
withstand time Cold (s) 16 Motor weight (approx.) kg 57
Stator connection DELTA GD² (4x MI) kgf.m² 0.0676
Rotor
Rotor Class KL16 Weight kg 22.6
Construction IS:2253 IMB35
Ratio of starting
current to the 100% voltage 6.0 Frame designation 132S
rated current 80% voltage 4.5
Ambient Temperature °C 50
Ratio of starting Voltage Variation % ± 10
torque to the 100% voltage 2.3 Frequency variation % ±5
rated torque 80% voltage 1.3 Combined Voltage &
Frequency variation % 10
Ratio of Breakdown # For directly coupled drives
torque to the 100% voltage 2.8
rated torque 80% voltage 1.7 Data subject to tolerance as per IS:12615.

Remarks : Unique Identification Code: UIC-1822374 <--- This code must match with the one on Characteristic Curves Sheet.

KALWA, INDIA Reference Document Printed & Checked : Release Date

Department : I DT LD P LV-Motors MTR 2.6-181ab Date : 18.12.2012 Aug '2011
Format Reference No.: MTR 7.1-006

Program Name:Documentation_Program_IE_V3_2R
 s Characteristic Curves
Unique Identification Code: UIC-1822374 <--- This code must match with the one on the Data Sheet.

Motor Type : 1SE0 130-4NA86 Voltage : 415V Rated Speed : 1449 rev/min
Output : 5.5 kW Frequency : 50Hz Rated Torque : 3.7 kgf.m / 36 Nm
Rated Current: 11A

% Load FL ¾FL ½FL Locked Rtr Curr 6 x Rated

Efficiency 87.7% 87.7% 87.2% LRWT HOT 8s
Power Factor 0.83 0.77 0.66 LRWT COLD 16 s

D A T A S U B J E C T T O T O L E R A N C E A S P E R I S : 1 2 6 1 5.

Efficiency & PF Curves Current Vs Load Curve

1 12
0.9 10
0.8
8

Current in A
0.7
Eff, PF

6
0.6
4
0.5
0.4 2

0.3 0
40 50 60 70 80 90 100 40 50 60 70 80 90 100
Load (% of rated output) Load (% of rated output)

Effy PF Current

Values other than those at FL, ¾FL and ½FL are only indicative. Do not extrapolate to No-load.

Speed Torque Curve Locked Rotor Withstand Curve

[Applicable for operation of motors on Grid Supply only.] [Applicable for operation of motors on Grid Supply only.]

300 100000

250
10000
Torque (% of rated)

200
1000
Time (s)

150

100
100

50 10

0
0 20 40 60 80 100 1
0 1 2 3 4 5 6 7
Speed (% of synchronous)
Current (times the rated)

Torque at 100%Vr Torque at 80% Vr Hot Cold

KALWA, INDIA Reference Document Printed & Checked : Release Date

Department : I DT LD P LV-Motors MTR 2.6-181ab Date : 18.12.2012 Aug '2011

Program Name: Documentation_Program_IE_V3_2R