IS IP Network Requirement Summary

The Aiphone IS Series has components that are capable of working on an IP network. The IP enabled door stations are
the IS-IPDV and IS-IPDVF. The IP enabled master station is the IS-IPMV, and the PC master station is the IS-SOFT.
There are also optional control units, the IS-IPC and the IS-CCU, that can connect several non-IP stations to a network to
reduce the number of IP addresses required. This is a summary of the requirements from an IT perspective.

Network Hardware
The IS IP devices require a wired connection to a network, but after that point there is flexibility on the choice of hardware
and media. Some requirements to keep in mind are:
• PoE is recommended for the IS-IPDV, IS-IPDVF, and IS-IPMV. The IS-SOFT, PC master station software, can be
installed on a computer using a wired, Wireless G, or Wireless N connection.
• Enterprise networks require Layer 3 switches or routers to route IGMP data. When there are multiple VLANs or
routing between IS devices on separate subnets, the network must route IGMP data or several features will not work.
• Global systems require NAT routers at each Site. If these devices will connect via the internet, each Site will need to
have a Host and each Host will need to be behind a NAT configured router (see page 2 for more details).

Network Layout
A network design can be as simple as a PoE switch or it could be an enterprise network with several routers and layer 3
switches connecting buildings in a campus. After configuring a system like this, some features (like unit scans, video, and
paging) may require additional configuration steps on the networking hardware before they will function as intended. Sites
requiring more than 32 stations can use the IS-IPC control units with IS hardwire products (IS-CCU, IS-MV, IS-DV) to
reduce the number of IP addresses required.

Example network
VLAN1 VLAN2
192.168.1.1 /24 192.168.2.1 /24

Layer 3 Switch

IS-IPDV IS-IPMV IS-IPMV IS-SOFT

CLIENT HOST CLIENT CLIENT
192.168.1.20 /24 192.168.1.40 /24 192.168.2.21 /24 192.168.2.22 /24
Host Unit IP: 192.168.1.40 System name: Enterprise Host Unit IP: 192.168.1.40 Host Unit IP: 192.168.1.40
Connection Port: 5060 Connection Port: 5060 Connection Port: 5060 Connection Port: 5060
Conn. Password: aiphone Conn. Password: aiphone Conn. Password: aiphone Conn. Password: aiphone

Multicasts: Searches, Video, Paging and Chimes

The IS system uses Multicasts to efficiently send video and paging announcements to many group members. Networks
that use multiple subnets will typically require additional work beyond setting up subnets, VLANs, and routing between
subnets. Multicasts are capable of being routed, but are not routed by default on any typical Layer 3 switch or router.

Multicast packets can be routed using PIM (Protocol Independent Multicast). Deciding which protocol and which method
to use for a particular network layout and configuring that method is beyond the scope of this document. Please refer to
the documentation of the layer 3 switch or router or the manufacturer for instructions.

Networks that cannot route Multicasts should use a Global System configuration (see page 2 for more details).
 Sites in a Global System

There are a variety of reasons why a Global System configuration should be implemented. These include:
• Exceeding the 32 IP address limit for a Site, (1 Host and 31 Clients)
• Devices using separate internet connections that are not connected by a VPN
• Some portion of the network hardware does not support IGMP routing, such as a fiber link, a VPN, or a router

Example Global System

NAT Router #1 NAT Router #2

Local IP Global IP Global IP Local IP
192.168.1.1 /24 100.1.1.1 200.2.2.2 10.2.2.1 /24

Internet

IS-IPDV IS-IPMV IS-IPMV IS-SOFT

CLIENT HOST HOST CLIENT
192.168.1.20 /24 192.168.1.40 /24 10.2.2.40 /24 10.2.2.41 /24
Host Unit IP: 192.168.1.40 System name: Enterprise-A System name: Enterprise-B Host Unit IP: 10.2.2.40
Connection Port: 5060 Connection Port: 5060 Connection Port: 5060 Connection Port: 5060
Conn. Password: aiphone Conn. Password: aiphone Conn. Password: aiphone Conn. Password: aiphone

Global IP address 100.1.1.1 Global IP address 200.2.2.2

(Network settings: common) (Network settings: common)

Ports

Each Host will have a unique list of ports to be forwarded, depending on the composition of the system. When a Site has
been completely programmed, go to IP unit registration and click the Port forwarding setting button to see what ports
will be required for the Site. The example Site Enterprise-A is shown below.

• 1 connection port, for establishing

Site to Site connections as well as
local connections
• 7 common ports for Site to Site calling
• 1 port for each door to receive audio
• 2 ports for each master to receive
video and audio
• Up to 7 ports for each IS-IPC, for
various functions

Support

If you have questions, please contact Aiphone Technical Support at (800) 692-0200 and select Technical Support
(option 1), then select the IP Support queue (option 2).

Aiphone Corporation
1700 130th Ave. NE Bellevue, WA 98005
Ph: (800) 692-0200 Fax: (425) 455-0071
www.aiphone.com [email protected]
 Pre-installation IS Network Information Sheet
Host Unit Settings (A host unit must be a physical device, such as a IS-IPDV, IS-IPDVF, IS-IPMV, or IS-IPC)
Network setting: Individual
System name: (1-24 alphanumeric characters)

DHCP used: (Y/N) - Aiphone recommends using a Static address, or DHCP reservation.
Static IP address: . . . Default is 192.168.0.39
Subnet Mask: . . .
Default Gateway: . . .
Primary DNS Server:
Secondary DNS Server:
MAC Address: : : : : : Found on actual device.
Unit name: (0-24 alphanumeric characters)
Web (Interface access) port: 443 (Not Adjustable)
Connection Port: (1024-65535) Default is 5060.
Connection Password: (1-16 alphanumeric characters)
Default password is aiphone

Network setting: Common

UPnP used: (Y/N)
Global (WAN) IP address: Global (WAN) IP address must be static.
Connection Port global (WAN): Set in Individual Network Setting window.
System data port: 43998 / 43999 (Not Adjustable)
43998 used for system check and clock synchronization
43999 used for system boot control
IP unit search multicast address: 239.197.40.41 (Not Adjustable) - Used to identify a unit on the network.
IP unit search multicast port: 41900 (Not Adjustable) - Used to identify a unit on the network.
Multicast address:
1: . . . Default is 239.0.1.1
2: . . . Default is 239.0.1.2
3: . . . Default is 239.0.1.3
4: . . . Default is 239.0.1.4
5: . . . Default is 239.0.1.5
Multicast address 1 is used for paging between sites, 2 used for paging in site, 3 used for chime in a site,
requires the IS-IPC to be host, 4 used for in site video, 5 used for remote site video.
Audio/video port: - (1024 - 65535) - Default is 50800 - 50814

Email setting:
Email source address:
SMTP server:
SMTP server port: 1-65535
Email log in ID: Required field
Email password: Required field
 Pre-installation IS Network Information Sheet
Administrator setting:

Administrator ID: (1-16 alphanumeric characters) - Default is aiphone

Password: (1-16 alphanumeric characters) - Default is aiphone

*Bandwidth = 8Mbps per active session with video set at highest quality.

Client settings:

# Unit Name MAC Address IP Address ID Password

1
2
3
4
5
6
7
8
9
10
11
12
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31