# This is a configuration file for Zabbix agent daemon (Unix)

# To get more information about Zabbix, visit http://www.zabbix.com

############ GENERAL PARAMETERS #################

### Option: PidFile

# Name of PID file.
#
# Mandatory: no
# Default:
# PidFile=/tmp/zabbix_agentd.pid

PidFile=/var/run/zabbix/zabbix_agentd.pid

### Option: LogType

# Specifies where log messages are written to:
# system - syslog
# file - file specified with LogFile parameter
# console - standard output
#
# Mandatory: no
# Default:
# LogType=file

### Option: LogFile

# Log file name for LogType 'file' parameter.
#
# Mandatory: no
# Default:
# LogFile=

LogFile=/var/log/zabbix/zabbix_agentd.log

### Option: LogFileSize

# Maximum size of log file in MB.
# 0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
# LogFileSize=1

LogFileSize=0

### Option: DebugLevel

# Specifies debug level:
# 0 - basic information about starting and stopping of Zabbix processes
# 1 - critical information
# 2 - error information
# 3 - warnings
# 4 - for debugging (produces lots of information)
# 5 - extended debugging (produces even more information)
#
# Mandatory: no
# Range: 0-5
# Default:
DebugLevel=4

### Option: SourceIP

# Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=

### Option: EnableRemoteCommands

# Whether remote commands from Zabbix server are allowed.
# 0 - not allowed
# 1 - allowed
#
# Mandatory: no
# Default:
# EnableRemoteCommands=0

### Option: LogRemoteCommands

# Enable logging of executed shell commands as warnings.
# 0 - disabled
# 1 - enabled
#
# Mandatory: no
# Default:
# LogRemoteCommands=0

##### Passive checks related

### Option: Server

# List of comma delimited IP addresses (or hostnames) of Zabbix servers.
# Incoming connections will be accepted only from the hosts listed here.
# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1',
'::ffff:127.0.0.1' are treated equally.
#
# Mandatory: no
# Default:
# Server=127.0.0.1

Server=127.0.0.1

### Option: ListenPort

# Agent will listen on this port for connections from the server.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# ListenPort=10050

### Option: ListenIP

# List of comma delimited IP addresses that the agent should listen on.
# First IP address is sent to Zabbix server if connecting to it to retrieve
list of active checks.
#
# Mandatory: no
# Default:
# ListenIP=127.0.0.1

### Option: StartAgents

# Number of pre-forked instances of zabbix_agentd that process passive checks.
# If set to 0, disables passive checks and the agent will not listen on any TCP
port.
#
# Mandatory: no
# Range: 0-100
# Default:
# StartAgents=3

##### Active checks related

### Option: ServerActive

# List of comma delimited IP:port (or hostname:port) pairs of Zabbix servers
for active checks.
# If port is not specified, default port is used.
# IPv6 addresses must be enclosed in square brackets if port for that host is
specified.
# If port is not specified, square brackets for IPv6 addresses are optional.
# If this parameter is not specified, active checks are disabled.
# Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
#
# Mandatory: no
# Default:
# ServerActive=

ServerActive=127.0.0.1

### Option: Hostname

# Unique, case sensitive hostname.
# Required for active checks and must match hostname as configured on the
server.
# Value is acquired from HostnameItem if undefined.
#
# Mandatory: no
# Default:
# Hostname=

Hostname=UbuntuMS

### Option: HostnameItem

# Item used for generating Hostname if it is undefined. Ignored if Hostname is
defined.
# Does not support UserParameters or aliases.
#
# Mandatory: no
# Default:
# HostnameItem=system.hostname

### Option: HostMetadata

# Optional parameter that defines host metadata.
# Host metadata is used at host auto-registration process.
# An agent will issue an error and not start if the value is over limit of 255
characters.
# If not defined, value will be acquired from HostMetadataItem.
#
# Mandatory: no
# Range: 0-255 characters
# Default:
# HostMetadata=

### Option: HostMetadataItem

# Optional parameter that defines an item used for getting host metadata.
# Host metadata is used at host auto-registration process.
# During an auto-registration request an agent will log a warning message if
# the value returned by specified item is over limit of 255 characters.
# This option is only used when HostMetadata is not defined.
#
# Mandatory: no
# Default:
# HostMetadataItem=

### Option: RefreshActiveChecks

# How often list of active checks is refreshed, in seconds.
#
# Mandatory: no
# Range: 60-3600
# Default:
# RefreshActiveChecks=120

### Option: BufferSend

# Do not keep data longer than N seconds in buffer.
#
# Mandatory: no
# Range: 1-3600
# Default:
# BufferSend=5

### Option: BufferSize

# Maximum number of values in a memory buffer. The agent will send
# all collected data to Zabbix Server or Proxy if the buffer is full.
#
# Mandatory: no
# Range: 2-65535
# Default:
# BufferSize=100

### Option: MaxLinesPerSecond

# Maximum number of new lines the agent will send per second to Zabbix Server
# or Proxy processing 'log' and 'logrt' active checks.
# The provided value will be overridden by the parameter 'maxlines',
# provided in 'log' or 'logrt' item keys.
#
# Mandatory: no
# Range: 1-1000
# Default:
# MaxLinesPerSecond=20

############ ADVANCED PARAMETERS #################

### Option: Alias

# Sets an alias for an item key. It can be used to substitute long and complex
item key with a smaller and simpler one.
# Multiple Alias parameters may be present. Multiple parameters with the same
Alias key are not allowed.
# Different Alias keys may reference the same item key.
# For example, to retrieve the ID of user 'zabbix':
# Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
# Now shorthand key zabbix.userid may be used to retrieve data.
# Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
#
# Mandatory: no
# Range:
# Default:

### Option: Timeout

# Spend no more than Timeout seconds on processing
#
# Mandatory: no
# Range: 1-30
# Default:
# Timeout=3

### Option: AllowRoot

# Allow the agent to run as 'root'. If disabled and the agent is started by
'root', the agent
# will try to switch to the user specified by the User configuration option
instead.
# Has no effect if started under a regular user.
# 0 - do not allow
# 1 - allow
#
# Mandatory: no
# Default:
# AllowRoot=0

### Option: User

# Drop privileges to a specific, existing user on the system.
# Only has effect if run as 'root' and AllowRoot is disabled.
#
# Mandatory: no
# Default:
# User=zabbix

### Option: Include

# You may include individual files or all files in a directory in the
configuration file.
# Installing Zabbix will create include directory in /usr/local/etc, unless
modified during the compile time.
#
# Mandatory: no
# Default:
# Include=

Include=/etc/zabbix/zabbix_agentd.d/*.conf

# Include=/usr/local/etc/zabbix_agentd.userparams.conf
# Include=/usr/local/etc/zabbix_agentd.conf.d/
# Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf

####### USER-DEFINED MONITORED PARAMETERS #######

### Option: UnsafeUserParameters

# Allow all characters to be passed in arguments to user-defined parameters.
# The following characters are not allowed:
# \ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @
# Additionally, newline characters are not allowed.
# 0 - do not allow
# 1 - allow
#
# Mandatory: no
# Range: 0-1
# Default:
# UnsafeUserParameters=0

### Option: UserParameter

# User-defined parameter to monitor. There can be several user-defined
parameters.
# Format: UserParameter=<key>,<shell command>
# See 'zabbix_agentd' directory for examples.
#
# Mandatory: no
# Default:
# UserParameter=

####### LOADABLE MODULES #######

### Option: LoadModulePath

# Full path to location of agent modules.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
# LoadModulePath=${libdir}/modules

### Option: LoadModule

# Module to load at agent startup. Modules are used to extend functionality of
the agent.
# Format: LoadModule=<module.so>
# The modules must be located in directory specified by LoadModulePath.
# It is allowed to include multiple LoadModule parameters.
#
# Mandatory: no
# Default:
# LoadModule=

####### TLS-RELATED PARAMETERS #######

### Option: TLSConnect

# How the agent should connect to server or proxy. Used for active checks.
# Only one value can be specified:
# unencrypted - connect without encryption
# psk - connect using TLS and a pre-shared key
# cert - connect using TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for
'unencrypted' connection)
# Default:
TLSConnect=psk

### Option: TLSAccept

# What incoming connections to accept.
# Multiple values can be specified, separated by comma:
# unencrypted - accept connections without encryption
# psk - accept connections secured with TLS and a pre-shared key
# cert - accept connections secured with TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for
'unencrypted' connection)
# Default:
TLSAccept=psk

### Option: TLSCAFile

# Full pathname of a file containing the top-level CA(s) certificates for
# peer certificate verification.
#
# Mandatory: no
# Default:
# TLSCAFile=

### Option: TLSCRLFile

# Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
# TLSCRLFile=

### Option: TLSServerCertIssuer

# Allowed server certificate issuer.
#
# Mandatory: no
# Default:
# TLSServerCertIssuer=

### Option: TLSServerCertSubject

# Allowed server certificate subject.
#
# Mandatory: no
# Default:
# TLSServerCertSubject=

### Option: TLSCertFile

# Full pathname of a file containing the agent certificate or certificate
chain.
#
# Mandatory: no
# Default:
# TLSCertFile=

### Option: TLSKeyFile

# Full pathname of a file containing the agent private key.
#
# Mandatory: no
# Default:
# TLSKeyFile=

### Option: TLSPSKIdentity

# Unique, case sensitive string used to identify the pre-shared key.
#
# Mandatory: no
# Default:
TLSPSKIdentity=PSK 001

### Option: TLSPSKFile

# Full pathname of a file containing the pre-shared key.
#
# Mandatory: no
# Default:
TLSPSKFile=/etc/zabbix/zabbix_agentd.psk