0% found this document useful (0 votes)
68 views5 pages

Nuform Perimeter Safety Screen System (NFSS)

Nuform

Uploaded by

Jinxian Xu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
68 views5 pages

Nuform Perimeter Safety Screen System (NFSS)

Nuform

Uploaded by

Jinxian Xu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 5
NUFORM PERIMETER SAFETY SCREEN SYSTEM (NESS) mE Oe Seen ai at4 © NESS ; Hydraulic Lifting “The building is always enclosed and safe, falls and dropped, equipment can be eliminated.” in NUFORM SYSTEM The Formwork Spe Nuform Perimeter Safety Screen System (NFSS) Nuform Perimeter Safety Screen System (NFSS) High Safety & High Flexibility [Pearce cree] ‘System Specifications Nuform Perimeter Safety Screen System enclosure for safeguarding work on the construction floor. Allowable Load 50 KN (5 ton) Safety Screen is a system in which the entire unit is 7 structure-gulded at all times, even while lifting. Height of Concrete Casting 2.0m~ 5.0m Workers are protected from all climatic influences. Lifting Speed Am / Sminutes Safe lifting also possible in high winds. Lifting Method By Crane or Variable influence widths, for ideal adaptation to structure jeometry. ee Hydraulic Lifting Suitable for Floor Heights of between 2.50m and 5.0 m. The Nuform Perimeter Safety Screen System - guided it repositioning, either by crane or hydraulic. ‘Suspension Point Set-up for Floor Slab Suspension Point Set-up for Perimeter Gable Wall Cone Serew 87 Universal 4 Aditional Wimmer lining ' sling Sleeve “k" ct ame Sl { jessrenen | oe : P| fhitouecaer 8 | Univers cmting | Additional Timmers sees Bar 4713, 300mm Cone crew 87 Stop Anchor. 15/tlem Cast in St ‘anchor 15/ item Set-up for Universal Climbing ‘Cone 15.0 with Stop Anchor 15/11em | (ED rerrael) Cone 15.0 with Stop Anchor 15/11¢m (Wall Thickness 2 175-200mm) CCone Screw 7+) + Universal ‘Additional Trimmer: Climbing Sealing Sleeve "k” ‘ar 4713, 300mm cone iso, Universal climbing ngs Additional Trimmer. Cone 15.0, Bar A713, 300mm fy CCastin Stop Ancho: sche 67: 415/33¢m So Castn Sto ‘Rnchor 15/i3em Set-up for Universal Climbit Set-up for Universal Climbing ‘Cone 15.0 with Stop Anchor 15/13em ‘Cone 15.0 with Stop Anchor 15/13em {Slab Thickness 2 200-250mm) (Wall Thickness > 200~250mm) Cone Screw 87>) Universal ‘Additional Trimmer Climbing Sealing Sleeve "K" ‘Bar 4713, 300mm Cone 15.0 Universal Climbing Cone 15.0 Sealing Sleeve mu ‘Additional Trimmers is Bar 4713, 300mm Castin Stop Anchors 15/15em ‘one Serew 87 Ce costin top sup fr Universal Climbing AHO 5/16em Set-up for Universal Climbing cones wih Stop Aner 13) S6em Cone 15.0 wth Stop Anchor 16cm (Slab Thickness 2 250mm) {Wwal'Thickness 250mm) FLOOR SLAB MOUNT PERIMETER GABLE WALL MOUNT NUFORM NUFORM SYSTEM SYSTEM mork Spaciaitet on 02 The Formwork Specialist YWFLOOR LeveL Sy FLOOR LEVEL Tica. FLOOREIo«T vy Floor i | yFLOOR LeveL sy FLOOR LEVEL Step-1. ‘© Move the safety screen towards the suspension points. DN Syerem Step-2. © Safety screen suspended positio ‘© Prepare for construction of next floor. ‘© Prepare the positioning point. Qn. 03 Step-3. © Prepare suspension point. ‘© Mount the slab anchor unit & guide suspension shoe on the next floor, Fix the hydraulic system Step-4. Lift up the gap decking. ‘¢ The required cube compressive strength of the concrete at the time of loading > 15 N/mn ‘© Ready to climb. Yt ~¢_ Step-5. Step-6. ‘© Climbing is in progress © Climbing is completed. with 300mm hydraulic lift. © Dismount the slab anchor unit with ‘guide suspension shoe at the lowest floor: NUFORM B 04 Anchor Point cS Cone Screw 87 em M30x70L S Universal Climbing Cone 15.0 Sealing Sleeve “k” Cast-n Stop Anchor Dia. 15.0cm Position the next anchoring point before casting the slab Note: © Universal climbing cone are supplied with sealing sleeves, “K". ‘* Always screw the stop anchor into the universal cone until it is fully engage. ‘® Embed the universal climbing cone so that itis flush with concrete surface. ‘© Tie the stop anchor tightly to the reinforcements with binding wire. Never weld or heat tie rods - risk of fracture © Prevent the vibrator from touching the positioning point. © Protect the thread from soiling. Flexibility of Slab Anchor Unit Gulde suspension Shoe Shoe Adaptor Standard Slab Anchor Unit, (2/s00xS0x5 TFC 43015) Slab Anchor Unit Fix the standard slab anchor unit in to the universal climbing cone 15.0 with a cone screw B7 cm. Note © A tightening torque of 100 Nm (20kg assuming a ratchet length of approx. SOOmm) is sufficient. «© Ifthe cone screw B7 cm is tightened more than this, may cause damage the screw, the only tool allowed to be used is the reversible ratchet 3/4”. Suspension Point Fix the shoe adaptor into the end face of the standard slab anchor unit with a cone screw B7 cm ‘© Insert suspension shoe onto the shoe adaptor & insert the safety pin into the suspension shoe until itis fully engaged. ‘© Turn the safety pin downwards. The suspension shoe is now secured against accidental lft-out. ~+— _ By adjusting the upper screw of the anchor unit, the standard slab anchor unit can be moved back and front 222. up to 4mm, © Adjusting concrete construction mistake or straightness and etc, © Ithas been designed to be applied to a structure which has an angular change. he Formwork Specialist 05 Jaws Fully Opened ¢¢ Fully rotate and open jaws of suspension shoe. «Lift the safety screen by crane and guide it towards the suspension shoe. Stopper Vertical Profile Jaws Fully Opened Lower the safety screen onto the suspension pin. Vertical Profile Jaws Closin | in Progress ¢ Jaws of suspension shoe close in progress. Vertical Profile Jaws Fully Closed ¢ Jaws of suspension shoe fully closed. 06 WR NUFORM NUFORM SYSTEM ASIA PTE LTD 1403-01 Singapore 486113 Tel: +65 6214 9244 / 6214 9210 [email protected] Website: www.nuform.com.sg NUFORMSYSTEM (M) SDN BHD 07-1, lve, Empire Towe, NUFORM Empire Subang, Jalan 5 16/1 447500 Subang Jaya, Selangor Tel: +603 5611 3859 EE GtE Fax: +603 5613 3858 Email: enquiry @nuform.com.my alist

You might also like