Company name: Awt

Created by: Abdallah Mahmoud

Phone: 01277839266
Email: [email protected]
Date: 16/02/2023
Qty. Description
1 CR 95-3 A-F-A-E-HQQE

Note! Product picture may differ from actual product

Product No.: On request

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base
are in cast iron – all other wetted parts are in stainless steel. The Grundfos cartridge shaft seal ensures high
reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe
connection is via DIN flanges.

The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition
(CED) process.
CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint
particles as a thin, well-controlled layer on the surface.
An integral part of the process is a pretreatment.
The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.

Pump
A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means of two coupling
guards. The long coupling makes it possible to replace the shaft seal without removing the motor from the pump.

The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plug and vent
screw.

Printed from Grundfos Product Centre [2023.06.005] 1/7

 Company name: Awt
Created by: Abdallah Mahmoud
Phone: 01277839266
Email: [email protected]
Date: 16/02/2023
Qty. Description
1 The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system.
This seal type is assembled in a cartridge unit which makes replacement safe and easy.
Due to the balancing, this seal type is suitable for high-pressure applications.
The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump
shaft and shaft seal.
Seal faces:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing
offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a PEEK neck ring
offering improved sealing and high efficiency. The impellers have smooth surfaces, and the shape of the blades
ensure a high efficiency.

The base is made of cast iron and mounted on a separate cast-iron base plate.
Both the inlet and the outlet side of the base have two pressure gauge tappings.
The pump is secured to the foundation by four bolts through the base plate.
The flanges are fastened to the base by means of locking rings.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor is
flange-mounted with free-hole flange (FF).
Motor-mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The protection
reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the automatic reset
cannot cause accidents. The motors must be connected to a motor-protective circuit breaker according to local
regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any duty point.
Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos Product Center.
Technical data

Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

Printed from Grundfos Product Centre [2023.06.005] 2/7

 Company name: Awt
Created by: Abdallah Mahmoud
Phone: 01277839266
Email: [email protected]
Date: 16/02/2023
Qty. Description
1 Technical:
Pump speed on which pump data are based: 2960 rpm
Rated flow: 95 m³/h
Rated head: 69.3 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals: CE,EAC,UKCA,SEPRO
Approvals for drinking water: ACS
Curve tolerance: ISO9906:2012 3B

Materials:
Base: Ductile cast iron
EN 1563 EN-GJS-500-7
ASTM A536-84 65-45-12
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: WC/WC
Support bearing: Graflon
Material certified according to: European standards

Installation:
t max amb: 60 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
Type of connection: DIN
Size of inlet connection: DN 100
Size of outlet connection: DN 100
Pressure rating for connection: PN 16
Flange size for motor: FF300

Electrical data:
Motor standard: IEC
Motor type: 180MB
IE Efficiency class: IE3
Rated power - P2: 22 kW
Power (P2) required by pump: 22 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415D/660-690Y V
Rated current: 39.5/22.8 A
Starting current: 830 %
Cos phi - power factor: 0.90-0.90
Rated speed: 2950 rpm
IE efficiency: IE3 92,7%
Motor efficiency at full load: 92.7-92.7 %
Motor efficiency at 3/4 load: 93.7 %
Motor efficiency at 1/2 load: 94.4 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 85U17530

Controls:
Frequency converter: NONE

Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 239 kg

Printed from Grundfos Product Centre [2023.06.005] 3/7

 Company name: Awt
Created by: Abdallah Mahmoud
Phone: 01277839266
Email: [email protected]
Date: 16/02/2023
Qty. Description
1 Gross weight: 303 kg
Shipping volume: 1.14 m³
Danish VVS No.: 386030030
Finnish LVI No.: 4925537
Thrust handling device: N
Country of origin: DK
Custom tariff no.: 84137000

Printed from Grundfos Product Centre [2023.06.005] 4/7

 Company name: Awt
Created by: Abdallah Mahmoud
Phone: 01277839266
Email: [email protected]
Date: 16/02/2023
H CR 95-3, 3*400 V, 50Hz eta
Description Value [m] [%]
General information:
100
Product name: CR 95-3 A-F-A-E-HQQE
90
Product No: On request 80
EAN number: On request
70
Technical:
Pump speed on which pump data are 60
2960 rpm
based:
50 100
Rated flow: 95 m³/h
40 80
Rated head: 69.3 m
Maximum head: 93.4 m 30 60

Stages: 3 20 40
Impellers: 3 10 20
Number of reduced-diameter impellers: 0
0 0
Low NPSH: N 0 20 40 60 80 100 Q [m³/h]
Pump orientation: Vertical Pumped liquid = Water
Liquid temperature during operation = 20 °C
Shaft seal arrangement: Single
Density = 998.2 kg/m³
Code for shaft seal: HQQE P NPSH
[kW] [m]
Approvals: CE,EAC,UKCA,SEPRO
25 25
P1
Approvals for drinking water: ACS
20 P2 20
Curve tolerance: ISO9906:2012 3B
Pump version: A
15 15
Model: A
Cooling: IC 411 10 10
Materials:
Base: Ductile cast iron 5 5

Base: EN 1563 EN-GJS-500-7

0 0
ASTM A536-84
380
419
220
180
150

140
40

275
225
100
350

18.5
x
4
900

4XG8
N/A
18
1/2

Base:
x

G 1/2

350
552

318
204

65-45-12 204
318
Impeller: Stainless steel
Impeller: EN 1.4301
Impeller: AISI 304
552

Material code: A
Code for rubber: E 350

Bearing: WC/WC G 1/2 G 1/2

Support bearing: Graflon

Material certified according to: European standards
900

Installation: 8 x 18

4 X G 1/2
t max amb: 60 °C N/A

4 x 18.5
Maximum operating pressure: 16 bar
150
180
220
140

40

Max pressure at stated temp: 16 bar / 120 °C 225 100

275 350
Type of connection: DIN 380 419

Size of inlet connection: DN 100

Size of outlet connection: DN 100
Pressure rating for connection: PN 16
Flange size for motor: FF300
+T +T +T
Connect code: F
Liquid:
Pumped liquid: Water
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE

Liquid temperature range: -20 .. 120 °C TO AMPLIFIER

RELAY
L1 L2 L3

Selected liquid temperature: 20 °C

THERMISTORS PTC ACCORDING TO DIN 44082

Density: 998.2 kg/m³

Electrical data: +T +T +T

Motor standard: IEC

Motor type: 180MB
IE Efficiency class: IE3 TO AMPLIFIER
RELAY

Rated power - P2: 22 kW L1 L2 L3

Printed from Grundfos Product Centre [2023.06.005] 5/7

 Company name: Awt
Created by: Abdallah Mahmoud
Phone: 01277839266
Email: [email protected]
Date: 16/02/2023

Description Value
Power (P2) required by pump: 22 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415D/660-690Y
V
Rated current: 39.5/22.8 A
Starting current: 830 %
Cos phi - power factor: 0.90-0.90
Rated speed: 2950 rpm
IE efficiency: IE3 92,7%
Motor efficiency at full load: 92.7-92.7 %
Motor efficiency at 3/4 load: 93.7 %
Motor efficiency at 1/2 load: 94.4 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Built-in motor protection: PTC
Motor No: 85U17530
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 239 kg
Gross weight: 303 kg
Shipping volume: 1.14 m³
Danish VVS No.: 386030030
Finnish LVI No.: 4925537
Thrust handling device: N
Country of origin: DK
Custom tariff no.: 84137000

Printed from Grundfos Product Centre [2023.06.005] 6/7

 Company name: Awt
Created by: Abdallah Mahmoud
Phone: 01277839266
Email: [email protected]
Date: 16/02/2023
Order Data:
Position Your pos. Product name Amount Product No Total
CR 95-3 1 On request Price on
request

Printed from Grundfos Product Centre [2023.06.005] 7/7