Design and Fabrication of Automatic Sand Separator: Ijarsct
Design and Fabrication of Automatic Sand Separator: Ijarsct
IJARSCT
International Journal of Advanced Research in Science, Communication and Technology (IJARSCT)
International Open-Access, Double-Blind, Peer-Reviewed, Refereed, Multidisciplinary Online Journal
Impact Factor: 7.53 Volume 4, Issue 2, April 2024
Abstract: Sand is essential for any type of construction. Different types of sand are required for different
constructions. For example, column, plaster, stairs. And this process takes a lot of labor and effort, so if you
want to build on a large scale, the traditional methods of separating sand are not suitable for us.as per the
survey, single filter machine is available in the market. In our experimental setup three different quality of
sand filtered in a single process. The strength of this setup is simulated in ANSYS also and by using our
experimental setup we reduce lebour cost and time. And increase working efficiency or working purpose
upto 35%. For this operation we used three types of filter frame and three different compartments. The
slider crank mechanism is used in this model.
REFERENCES
[1] S. K. Subramaniam; Siti Huziamah Binti; Yusmarinta Yusop; and A.Hamidon,“Machine efficiency and Man power
utilization on production lines.” 8th WSEAS Int. Conf.on electronics, hardware, wireless and Optical communication,
Jan 2008.
[2] V. M. Magar, B. S. Vilas, G. K. Sajan, and D. S. Shubhas, “Design and fabrication of multistage sand Separator and
filter,” GRD journal for engg. Vol. 2, may 2018.
[3] G. Kurnia, b. Yulianto, J. Jamari, and A. P. Bayuseno, “Evaluation in conceptual design of humal Powered sand
sieving machine,” E3S Web of conferences 125, 2019.
[4] Vijay Talodhikar et.al ,” Design And Fabrication Of Sand Separator”, International Journal for Research Trends and
Innovation”, Volume 7, Issue 5, 202
[5] Machine Design, Robert. L. Norton, Pearson Education Asia, 2001.
[6] Machine Design, A CAD Approach, Andrew Dimarogonas, John Wiley, Inc, 2001
[7] Design of machine elements by JBK Das and PL Srinivasamurthy, Sapna Book house, 2015.
[8] Ribbon blenders: A best practices guide by Charles Ross and son company.
[9] Bureau of Labor Statistics, U.S. Department of Labor, Occupational Outlook Handbook, 2012-13 Editions.
[10] Standard Classification for Cost Estimate Classification System, ASTM E2516-11.
[11] Bill of Materials. Inventory Interface. Gerald Drouillard, December 28, 2001. Retrieved June 7, 2011.
[12] Vatroslav grubisic, fatigue failure of automobile components, fraunhofer institute of reliability, 12th oct 2004.
Tokyo, pp. 01-37.
[13] A.K.Nachimuthu, 2014 "Analysis and optimizing connecting rod for weight and cost reduction", International
Journal of Research and Innovation in Engineering Technology.
[14] Ashok G.Ambekar, mechanism and machine theory, prentice-hall india, 2007, newdelhi, pp800-805.