Scribd
Upload
31 views

Anybus X-Gateway - PROFINET-IO Device - Modbus RTU Slave

Uploaded by

helitonpiran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Anybus X-Gateway - PROFINET-IO Device - Modbus RTU Slave

Uploaded by

helitonpiran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

25/08/2023, 08:21 Anybus X-gateway – PROFINET-IO Device – Modbus RTU Slave

Anybus X-gateway – PROFINET-IO


Device – Modbus RTU Slave
The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their
connected devices between and PROFINET and Modbus RTU networks.

FAST COPYING OF I/O DATA


The X-gateways primary function is with the fast transfer of cyclic I/O data between the two
networks. This offloads your PLC from working with additional calculations. The gateway acts as a
Device on the PROFINET network and as a Slave on the Modbus RTU network. The data
transmission between the two networks is completely transparent with a maximum data capacity
of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!


The connection between the two networks is quickly set up in the Anybus Configuration Manager
software, included with the X-gateway. No programming skills are needed to set up the X-gateway.
As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

Features and benefits


 Fast copying of cyclic I/O data between PROFINET and Modbus RTU networks (10-15 ms)

Proven and tested with all PLC manufacturers
 Supports up to a maximum of 512 bytes of Input and Output data in each direction

Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
 Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included
Anybus OPC server
 Optional control status information added to I/O data for diagnostic purposes
 Robust stand-alone housing for use in harsh industrial environments
 Global free technical support and consultancy

PROFINET I/O Device/Slave interface


PROFINET IO Device/Slave settings can be made by importing the provided .GSDML file into engineering tool of the controlling PLC.

Complete PROFINET-IO Soft-Real-Time (RT) communication
 Max 512 bytes of Input and 512 bytes of Output data
 Up to 64 slots / 1 sub slot
 Cyclic data exchange (10 ms cycle time)

Acyclic Data exchange (Record Data Requests)
 Baud rate 100 Mbit/s
 Integrated FTP server provides easy file management using standard FTP clients
 Web server with dynamic data capability and Server Side Include (SSI) capability

Email client with dynamic data capability and Event-triggered email handling

TCP/IP Configuration via DCP (Discovery and Configuration Protocol)
 PROFINET uplink configuration via web interface or .GSDML file
 1x RJ45 network connector

https://www.anybus.com/products/gateway-index/anybus-xgateway/detail/anybus-x-gateway-profinet-io-device-modbus-rtu-slave 1/3
25/08/2023, 08:21 Anybus X-gateway – PROFINET-IO Device – Modbus RTU Slave

Modbus RTU Slave interface


Modbus RTU network address settings made via on-board configuration switches
 Complete Modbus RTU slave functionality
 Max 512 bytes of Input and 512 bytes of Output data
 Modbus diagnostics support

Configuration via on-board DIP switches

Modbus RTU baudrate 12-57,6 kbit/s
 1x D-sub 9-pin female network connector

TECHNICAL SPECIFICATIONS

Dimensions (L•W•H) 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"

Weight 400g or 0,880 lbs

Operating temperature -25 to +65 °C or -13 to +149 °F

Storage temperature -40 to +85 °C or -40 to +185 °F

Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector

Current consumption max. 400mA (Typical 200mA)

Enclosure material Aluminium and plastic

Installation position Vertical / Flat*

Galvanic isolation YES, on both BUS/Ethernet side

Mechanical rating IP20, NEMA rating 1

Mounting DIN-rail (EN 50022 standard)

I/O configuration via USB port with Anybus Configuration Manager software

Certifications CE, CULUS, RoHS

File Version Size Read online

Ordering information

Order Code AB7659

https://www.anybus.com/products/gateway-index/anybus-xgateway/detail/anybus-x-gateway-profinet-io-device-modbus-rtu-slave 2/3
25/08/2023, 08:21 Anybus X-gateway – PROFINET-IO Device – Modbus RTU Slave

Included components Gateway


Quick start documentation
USB configuration cable
Power supply not included

Configuration and Anybus OPC server software is available for download

3 year guarantee. For purchasing instructions and terms and conditions, see: How to buy

Copyright © 2020 HMS Industrial Networks - All rights reserved.

https://www.anybus.com/products/gateway-index/anybus-xgateway/detail/anybus-x-gateway-profinet-io-device-modbus-rtu-slave 3/3

You might also like