Scribd
Upload
25 views

Manual Crates Washing Machine For 80-100 E1-E3 Crates/ H Steam

The document describes a manual crates washing machine that can wash 80-100 plastic E1-E3 crates per hour using steam heating. It is made of stainless steel and has adjustable nozzles, automatic detergent dosing, heated water circulation, air drying, and optional upgrades like drum filters or thermal disinfection.

Uploaded by

Kyriakos Michalaki
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

Manual Crates Washing Machine For 80-100 E1-E3 Crates/ H Steam

The document describes a manual crates washing machine that can wash 80-100 plastic E1-E3 crates per hour using steam heating. It is made of stainless steel and has adjustable nozzles, automatic detergent dosing, heated water circulation, air drying, and optional upgrades like drum filters or thermal disinfection.

Uploaded by

Kyriakos Michalaki
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Manual crates washing machine

for 80-100 E1-E3 crates/ h


steam

Art.-Nr.: 1.577.01

Manual crates washing machine for 80-100 E1-E3 crates/h steam

The machine is a pass-through washing machine designed for cleaning of E1-E3 plastic crates. It is made entirely of
stainless steel, 1.4301 DIN (AISI 304) grade with permission for contact with food according to the standard. The
washing is performed by means of a centrifugal pump and adjustable nozzles. The automatic dosing of the detergent is a
standard integration. Washing is performed with water circulation in a closed filtered cycle. General water supply is
used for rinsing. The tank is equipped with manually cleaned filter (drum filter- option) for catching bigger particulars.
The water (cleaning agent) for washing is heated by means of electric heaters or a steam injector. The desired water
temperature for washing can be adjusted between 30-60°C via a thermostat. General water supply is used for rinsing.
The water used during the rinsing process is afterwards led away into the main tank and thus the water inside is
constantly refreshed. The air-blasting is performed by nozzles of the air-blade type, supplied by centrifugal fans. The
crates are transported, placed transversely with their bottoms up. The gear motor is equipped with sliding connector to
prevent eventual injuries to the personnel from the transport chain. The control panel can be mounted either on the left
or on the right side of the machine in accordance with the customer requirements

Options:
- Automatic system for detergent filling and dosing ( with concentration measurement)
- Flange Ø150 for plugging to steam offtake
- sucking – flange, fan, control;
- Chemical disinfection- including disinfectant in the rinse
- Thermal disinfection (additional rinsing section)- hot water 82°C is provided from the customer;
- safety switches;
- drum filter in the pre-washing zone.
It is possible to produce non-standard equipment depending on the customers’ needs and requirements.
Art.-Nr.: 1.577.01

Technical data:
performance: 80 – 100 crates/ h
heating system: 3- 12 bar/ 135°C
power: 2 kW
power supply: 400V- 50 Hz
nozzles: 18 pcs
tank: 150 L
pumps performance: 1.5 kW 10 m³/h 2.5 bar
pressure on on let: 3 bar
weigth: 250 kg
drive: Manual drive
dimensions (L x W x H): 2.990 x 1.050 x 1.620 mm

You might also like