ARC433A51/A53/A63

ARC433A51/A53/A63 Controller Quick User Guide

*ARC433A53 offers
both horizontal &
vertical swing.

Display Screen 1.

ON/OFF 2.
Setpoint TEMP Selection 3. 9. HOME LEAVE
10. POWERFUL
FAN 4. *ARC433A63
SWING 5.* does not have the
MODE Selection button 6. SENSOR or the
SWING features
11. SENSOR
CANCEL 7. 12. QUIET
13. ON / OFF Timer buttons
14. Clock button
Batteries 8. 15. RESET button
Note: For effective operation, this controller should be
pointed at the infrared receiver on the indoor unit. The 16. TIMER setting button
maximum distance for communication is 23ft (7m). ARC433A51

FUNCTIONS FEATURES
1. DISPLAY SCREEN: Displays current system settings and 9. HOME LEAVE: When selected, you can either operate
setpoint temperature. your system to your preferred setpoint temperature and
2. ON/OFF: To switch the system on and off. airflow rate or use the function for energy saving when you
3. TEMP: Setpoint temperature can be adjusted with the are not occupying the room served by the unit. To set
up/down arrows. C:64-90°F, H:50-86°F HOME LEAVE, push the button and make sure the HOME
4. FAN: Five levels of airflow and automatic are LEAVE icon is displayed. Then set the setpoint
temperature and airflow to your desired settings to ensure
available for selection. If Automatic is selected, the that HOME LEAVE mode operates your system with the
fan speed automatically changes according to the designated conditions.
difference from setpont temperature to room temperature. 10. POWERFUL: Select to provide maximum Cooling or Heat-
5. SWING: Use to oscillate the vertical louvers, ing for 20 minutes, thus delivering rapid cooling or heating
providing a varying air distribution pattern. You can use for immediate comfort results. During this operation,
this button by selecting/deselecting to position the louvers setpoint temperature or airflow settings are not adjustable.
in the desired position also. 11. SENSOR: Selecting starts the Intelligent Eye feature that
detects human movement. When no movement is
For the ARC433A53 only: Use to oscillate the
detected for 20 minutes, temperature setback/setup
horizontal louvers, providing a varying air distribution
pattern. You can use this button by selecting/deselecting (+/- 3.6°F) is enabled providing energy savings. This
to set the louvers in the desired position also. feature can be cancelled by pushing the SENSOR button
6. MODE Selection button: MODE icons indicate current again.
operation mode. Push the mode button to select from: 12. QUIET: Selecting lowers the Fan Speed of the Outdoor
Unit, thus lowering its sound level. This can be useful
during hours of sleep. Press again to cancel.
13. ON/OFF TIMER OPERATION: Check that the clock is
AUTO: Auto changeover − Cooling and Heating switch correct, and then press OFF. Press the TIMER setting
automatically to maintain the desired setpoint temperature. button (increments of 10) until the time setting reaches the
DRY: Cooling Operation − Unit operates to minimize setting you want. Press OFF again and the TIMER lamp
temperature change but reduces room humidity levels. lights.
COOL: Cooling Operation − To the desired setpoint 14. Clock Button: To set the clock, press the clock button,
temperature. and [0:00] is displayed. Press the TIMER setting button to
HEAT: Heating Operation − To the desired setpoint tem- set the clock to the present time. Then press the Clock
peraure. button again.
FAN: Fan only operation (Room air is circulated). 15. RESET button: Resets icon that alerts you to clean the air
7. CANCEL: Press to cancel Timer settings. filter.
8. Battery compartment: Push down on casing to expose 16. TIMER SETTING BUTTON: Used to set the Timer to the
batteries. (2 x AAA type) desired condition.
QUG-ARC433A51/A53/A63-10/08