Scribd
Upload
37 views

Soil Moisture Sensor Module

Uploaded by

vinoth Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
37 views

Soil Moisture Sensor Module

Uploaded by

vinoth Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Soil Moisture Sensor Module

Soil Moisture Sensor Module


Soil Moisture Sensor Module

This soil moisture sensor module is used to detect the moisture of the soil. It measures the
volumetric content of water inside the soil and gives us the moisture level as output. The module
has both digital and analog outputs and a potentiometer to adjust the threshold level.

Soil Moisture Sensor Module Pinout Configuration

Pin Name Description

VCC

The Vcc pin powers the module, typically with +5V

GND Power Supply Ground

DO Digital Out Pin for Digital Output.


AO Analog Out Pin for Analog Output

Soil Moisture Sensor Module Features & Specifications

 Operating Voltage: 3.3V to 5V DC


 Operating Current: 15mA
 Output Digital - 0V to 5V, Adjustable trigger level from preset
 Output Analog - 0V to 5V based on infrared radiation from fire flame falling on the sensor
 LEDs indicating output and power
 PCB Size: 3.2cm x 1.4cm
 LM393 based design
 Easy to use with Microcontrollers or even with normal Digital/Analog IC
 Small, cheap and easily available

Alternate Sensor Modules: IR Sensor Module, LDR Sensor Module, Flame Sensor
Module, TP4056A Li-ion Battery Charging/Discharging Module, DS3231 RTC Module, TMC2209
Stepper Motor Driver Module, DRV8825 Stepper Motor Driver Module, A4988 Stepper Motor
Driver Module, NEO-6MV2 GPS Module, Joystick Module, EM18 - RFID Reader Module, ADXL335
Accelerometer Module, HMC5883L Magnetometer Module

Related Components: LM393 Comparator IC, 10K Potentiometer, Capacitor

Brief about Soil Moisture Sensor Module

This Moisture sensor module consists of a Moisture sensor, Resistors, Capacitor, Potentiometer,
Comparator LM393 IC, Power and Status LED in an integrated circuit.
LM393 IC

LM393 Comparator IC is used as a voltage comparator in this Moisture sensor module. Pin 2 of
LM393 is connected to Preset (10KΩ Pot) while pin 3 is connected to Moisture sensor pin. The
comparator IC will compare the threshold voltage set using the preset (pin2) and the sensor pin
(pin3).

Moisture Sensor

The moisture sensor consists of two probes that are used to detect the moisture of the soil. The
moisture sensor probes are coated with immersion gold that protects Nickel from oxidation. These
two probes are used to pass the current through the soil and then the sensor reads the resistance
to get the moisture values.

Preset (Trimmer pot)

Using the onboard preset you can adjust the threshold (sensitivity) of the digital output.

How to Use Soil Moisture Sensor Module

Moisture sensor module consists of four pins i.e. VCC, GND, DO, AO. Digital out pin is connected to
the output pin of LM393 comparator IC while the analog pin is connected to Moisture sensor. The
internal Circuit diagram of the Moisture sensor module is given below.
Using a Moisture sensor module with a microcontroller is very easy. Connect the Analog/Digital
Output pin of the module to the Analog/Digital pin of Microcontroller. Connect VCC and GND pins
to 5V and GND pins of Microcontroller. After that insert the probe inside the soil. When there is
more water presented in the soil, it will conduct more electricity that means resistance will be low
and the moisture level will be high.

Applications of Soil Moisture Sensor

 Gardening
 Irrigation Systems
 Used in Controlled Environments

You might also like