Use of calculators in IB DP examinations 2024 – version 1.

This document should be read in conjunction with the “Conduct of examinations booklet 2024” and the
“Calculators guidance for examinations booklet 2024”; both are available on the Programme Resource
Centre.

We provide examples of calculators which are permitted for use in IB examinations and those which are
prohibited. This list will be updated as and when necessary. It should be noted that these are not
exhaustive nor definitive lists and teachers should check other models are within policy.

A calculator will not be permitted for IB DP examinations if:

• it does not meet the minimum requirements for calculators for that subject;
• it includes functionality that is unique to the prohibited calculators listed in this document, most
predominately CAS functions;
• it includes additional elements, for example third-party applications or student generated notes, which
are not removed (via a reset) or blocked (via an examination mode).

Schools should ensure that all calculators used in examinations comply with the regulations.

Examples of permitted calculators

Texas TI 84 Plus – all models TI-83 Plus

Instruments
TI-Nspire (non-CAS models) All TI-Nspire models
must be updated to the
• TI-Nspire CX II / CX II-T (OS version 5.4 or higher)
• TI-Nspire CX (OS version 4.5.5) latest Operating System
(OS) as indicated.
TI-Nspire (selected CAS models)
All TI-Nspire models
with CAS mode disabled
must be placed in
• TI-Nspire CX II CAS (OS version 5.4 or higher) “Press-to-Test” mode
• TI-Nspire CX II-T CAS (OS version 5.4 or higher) with the correct features
• TI-Nspire CX II-C CAS (OS version 5.4 or higher) blocked (see list below).
NumWorks NumWorks calculator (OS version 18.1.0 or higher) with IB exam mode activated
Hewlett HP Prime updated to the latest firmware in “Exam Mode”, with the correct features
Packard blocked (see list below)
Casio FX-9860GII / FX-9860GII SD / FX-9860G AU PLUS updated to the latest operating
system for IB examinations in “Examination Mode (for IB)”
FX-9750GIII / FX-9860GIII / Graph 35+ EII updated to the latest operating system for IB
examinations in “Examination Mode (for IB)”
FX-CG50 / FX-CG50AU / FX-CG20 / Graph 90+E updated to the latest operating system
for IB examinations in “Examination Mode (for IB)”

See “Necessary actions with permitted calculators” below for guidance on ensuring these devices meet
requirements.

Version 1.0
Prohibited calculators

The following models are not allowed in examinations under any circumstances.

Texas Instruments TI Voyage 200 (all versions) TI 89 (all versions)

Older CAS models:
• TI-Nspire CX CAS
• TI-Nspire CAS
TI-Nspire models that are not updated to the latest operating system
Hewlett Packard HP 38-95 (all versions)
Casio Classpad (all versions) / FX CG500 Graph 100
FX 2.0 (all versions) FX 9970 (all versions)
Devices with an “Examination Mode” that are not updated to the latest operating
system

Notes:
• Any devices with unrestricted/student accessible WiFi functionality are not permitted.
• Other calculators which have advantageous features that do not appear on any of the permitted
models and/or have functionality that is exclusive to the prohibited calculators (and not blocked
during the examination) are not allowed.
• Students may not use or store data/notes, programs or flash (ROM) applications (Apps) in their
calculators that may assist them in an examination by removing the need to recall facts or
formulae.

Version 1.0
Necessary actions with permitted calculators

Casio

FX-CG50 / FX-CG20 / FX 9860GIII / FX 9750GIII / FX 9860GII / FX 9860GII SD / FX

9860G AU PLUS / Graph 35+ EII / Graph 90+E (and some older iterations of these
devices)

Ensure, via the Casio website, that your device has the latest operating system.

https://edu.casio.com/download_service/download/ib/

The “Examination Mode (for IB)” functionality must be engaged immediately before the examination and
continue for the duration of the examination. If done earlier, a student must not have access to the
calculator between the time it is put into “Exam Mode” and the examination.

Please refer to the manual on how to engage this mode. If your device has multiple examination modes,
ensure the “for IB” mode is implemented.

All recommended Casio calculators

Initialize/reset all memory.

NumWorks – IB exam mode

Navigate to the settings menu on the device and change the country to “International”. Returning to the
settings menu, choose “Test mode”, then “Exam mode” and finally “Activate IB exam mode”.

The IB exam mode must be engaged immediately before the examination and continue for the duration of
the examination. If done earlier, a student must not have access to the calculator between the time it is put
into “IB exam mode” and the examination.

Version 1.0
HP Prime “Exam Mode” configurations
Note: Students must upgrade their Prime to the latest firmware to use the “Exam Mode” properly. Primes
which have not been updated and put into the correct “Exam Mode” are not allowed in the examinations.
Primes must be put into “Exam Mode” immediately before the examination. If done earlier, a student must
not have access to the calculator between the time it is put into “Exam Mode” and the examination. Further
details about “Exam Mode” can be found on the HP website.

The following options in “Exam Mode” mode must be ticked.

• Erase memory:
• Blink LED:

The following options in “Exam Mode” mode must be ticked and therefore blocked.
• PredX
• PredY
• Triangle Solver
• Linear Explorer
• Quadratic Explorer
• Trig Explorer
• Geometry
• Advanced Graphing
• User Apps
• Physics
• CAS
• Notes and Programs
• New Notes and Programs
• Vector
 CROSS
 DOT

The following screen shots show how to put the Prime into the correct “Exam Mode”.

Notes:

• “Timeout” must be set for at least the duration of the examination.

• When put in “Exam Mode”, the default angle setting can be set to “Degrees” or “Radians”
depending on student preference.

The approved exam mode for HP Prime can be found at www.hpcalcs.com/download.

Version 1.0
Version 1.0
TI Nspire / TI Nspire CX / TI Nspire CX II “Press to Test” configurations
Note: Nspires which have not been put into the correct “Press to Test” mode are not allowed in the
examinations. Nspires must be put into “Press to Test” mode immediately before the examination. If done
earlier, a student must not have access to the calculator between the time it is put into “Press to Test” mode
and the examination. Further details about “Press to Test” can be found on the TI website.

The following options in “Press to Test” mode must be ticked and therefore blocked.
• Limit geometry functions
• Disable function and conic grab and move, and disable change of equation form
• Disable vector functions, including eigenvectors and eigenvalues
• Disable “isPrime” function
• Disable differential equation functionality
• Disable 3D graphing
• Disable implicit graphing, conic templates, conic analysis, and geometric conics
The following options in “Press to Test” mode must be unticked and therefore allowed.
• Disable inequality graphing
• Limit trigonometric functions
• Disable logbx template and summation functions
• Disable Polynomial Root Finder and Simultaneous Equation Solver
• Disable Numerical Solver
• Disable Sliders

TI-Nspire (non-CAS models) TI-Npire (selected CAS models) When complete, Home screens
with CAS Mode off must appear as follows
• TI-Nspire CX II
• TI-Nspire CX II-T • TI-Nspire CX II CAS TI-Nspire (non-CAS models)
• TI-Nspire CX • TI-Nspire CX II-T CAS
• TI-Nspire • TI-Nspire CX II-C CAS

TI-Nspire (selected CAS models)

Screens will vary depending on

the selected model

Note: For some devices, an “Exact Arithmetic” mode can be turned on at this stage. This is permitted in
IB examinations, although it is not required. For IB GDC examinations the exact value or a 3 significant
figure approximation will be credited as correct. Unlike the “Angle Setting”, this “Exact Arithmetic” mode
cannot be changed once set.

Version 1.0
TI 83 plus / TI 84 plus permitted calculators
Do NOT use the integrated exam/test mode on these devices. This mode blocks important Apps
(for example PlySmlt2; see the list below). Instead:

1. Reset all RAM memory.

2. Reset Archive Vars (if applicable).

3. Remove all Flash (ROM) applications (Apps) except those listed below, where applicable.

App Menu Name Description

CBL/CBR Connectivity/set-up of CBL™ data collection system

(Other connectivity Apps for USB-type probes are also acceptable and do not need to
be removed.)
Chinese Chinese version of Catalog Help
CtlgHelp Catalog Help provides easy access to calculator function information
Dansk Danish language localizer—this App will translate all prompts, error messages and most
functions into Danish
Deutsch Language localizer—this App will translate all prompts, error messages and most
functions into German
EasyData Connectivity App for USB-type data collection probes
Español Language localizer—this App will translate all prompts, error messages and most
functions into Spanish
Finance Finance operations—part of the Operating System
Français Language localizer—this App will translate all prompts, error messages and most
functions into French
Italiano Language localizer—this App will translate all prompts, error messages and most
functions into Italian
Magyar Language localizer—this App will translate all prompts, error messages and most
functions into Hungarian
Nederlan Language localizer—this App will translate all prompts, error messages and most
functions into Dutch
Norsk Language localizer—this App will translate all prompts, error messages and most
functions into Norwegian

Polski Language localizer—this App will translate all prompts, error messages and most
functions into Polish
PolySmlt Combination of two programs, one that finds polynomial roots and one that finds
solutions to systems of equations. This version is an older version than PolySmlt2.
PlySmlt2 Combination of two programs, one that finds polynomial roots and one that finds
solutions to systems of equations
Portug Language localizer—this App will translate all prompts, error messages and most
functions into Portuguese
Suomi Language localizer—this App will translate all prompts, error messages and most
functions into Finnish
Svenska Language localizer—this App will translate all prompts, error messages and most
functions into Swedish
Transfrm Transform Graphing—this App allows users to increment a parameter in a function
whilst viewing the function; analogous to the sliders in the TI-Nspire models.

Version 1.0