3/11/24, 2:55 PM View Form

HOSSAIN CONSTRUCTION (PVT) LTD

Bill of Quantities

Bill of Quantities

Total
Unit Price Unit Price Total Price
Item Price
Item Measurement
Group Code (if Description of Item Quantity
no. Unit In figures In Words In Figures
any) In Words
(BDT) (BDT) (BDT)
(BDT)

''Site development/ Improvement by carted earth or dredged

Three
sand, sandy silt (free from any organic, foreign,
Crore
environmental hazardous substances) carried by head or
Six Eighty-
truck or any other means including cost of cutting or by
PART-A-i : SITE Hundred Nine Lakh
dredging of sand, sandy silt, all; including local carrying,
1 DEVELOPMENT 1 Cum 56400.000 690.001 and Ninety 38916056.400 Sixteen
placing the earth/sand, sandy silt in the designated area,
WORKS point Zero Thousand
maintaining slopes, breaking lumps, levelling and dressing in
Zero One AND Fifty-
layers up to finished level etc. all complete as per direction
Six point
and accepted by the engineer in charge.
Four
a) By other method/ means than dredgeing.''

Five Five
PART-A-i : SITE
Hundred Thousand
2 DEVELOPMENT 1.2 b) By dredging including necessary systems thereof. Cum 10.000 500.001 5000.010
point Zero point Zero
WORKS
Zero One One

One Crore
Eleven
Mechanical compaction of earth beyond plinth area, required
One Lakh
for pre-approved specific engineering purpose in 150 mm
Hundred Sixty-
layers including levelling, watering and consolidation each
PART-A-i : SITE and Seven
layer with chain dozer, grader, roller etc. to achieve minimum
3 DEVELOPMENT 2 Cum 56400.000 198.001 Ninety- 11167256.400 Thousand
dry density of 95% with optimum moisture content (modified
WORKS Eight point Two
proctor test) up to finished level all complete and accepted by
Zero Zero Hundred
the engineer-in-charge subjected to submission of the
One and Fifty-
method statement.
Six point
Four

''Earth work in excavation in all kinds of soil for foundation

trenches including layout, providing center lines, local bench-
mark pillars, levelling, ramming and preparing the base,
fixing bamboo spikes and marking layout with chalk powder,
Thirty-One
providing necessary tools and plants, protecting and
PART-A-ii : SITE Thousand
maintaining the trench dry etc., stacking, cleaning the
DEVELOPMENT Five
excavated earth at a safe distance out of the area enclosed Eighteen
WORKS ( Hundred
4 1 by the layout etc. all complete and accepted by the Engineer- Sqm 1750.000 18.001 point Zero 31501.750
EARTHWORK IN and One
in-charge, subject to submit method statement of carrying out Zero One
EXCAVATION OF point
excavation work to the Engineer-in-charge for approval.
POND) Seven
However, engineer's approval shall not relieve the contractor
Five
of his responsibilities and obligations under the contract.
a) Layout and marking for earthwork in excavation in
foundation accepted by the Engineer-in-charge. [Plinth area
of the structure shall be considered for measurement]''

Six Lakh
''Earthwork in excavation of pond of any dimension in all
Fifty-Five
PART-A-ii : SITE kinds of soil including cutting up to required depth including
Two Thousand
DEVELOPMENT bailing out water and throwing on the embankment, breaking
Hundred Two
WORKS ( clods, ramming and leveling, dressing in 225 mm layer with
5 2.a Cum 2730.000 240.001 and Forty 655202.730 Hundred
EARTHWORK IN maintaining the side slopes and level of both pond and the
point Zero and Two
EXCAVATION OF embankment as per design and accepted by the Engineer-in-
Zero One point
POND) charge.
Seven
a) For initial lead of 30 m and lift of 1.5 m''
Three

One Lakh
PART-A-ii : SITE
Two Thirty
DEVELOPMENT
Hundred Thousand
WORKS ( b) Added for each additional lift of 0.3 m beyond 1.5 m and
6 2.b Cum 545.000 240.001 and Forty 130800.545 Eight
EARTHWORK IN up to 3 m (Depth of 1.8 m)
point Zero Hundred
EXCAVATION OF
Zero One point Five
POND)
Four Five

One Lakh
PART-A-ii : SITE
Two Thirty
DEVELOPMENT
Hundred Thousand
WORKS ( c) Added for each additional lift of 0.3 m beyond 1.5 m and
7 2.c Cum 545.000 240.001 and Forty 130800.545 Eight
EARTHWORK IN up to 3 m (Depth of 2.1 m)
point Zero Hundred
EXCAVATION OF
Zero One point Five
POND)
Four Five

One Lakh
PART-A-ii : SITE Thirty-Six
Two
DEVELOPMENT Thousand
Hundred
WORKS ( d) Added for each additional lift of 0.3 m beyond 1.5 m and Two
8 2.d Cum 545.000 250.001 and Fifty 136250.545
EARTHWORK IN up to 3 m (Depth of 2.4 m) Hundred
point Zero
EXCAVATION OF and Fifty
Zero One
POND) point Five
Four Five

One Lakh
PART-A-ii : SITE
Two Fifty-Two
DEVELOPMENT
Hundred Thousand
WORKS ( e) Added for each additional lift of 0.3 m beyond 1.5 m and
9 2.e Cum 545.000 280.001 and Eighty 152600.545 Six
EARTHWORK IN up to 3 m (Depth of 2.7 m)
point Zero Hundred
EXCAVATION OF
Zero One point Five
POND)
Four Five

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 1/80
3/11/24, 2:55 PM View Form
One Lakh
PART-A-ii : SITE
Two Fifty-Two
DEVELOPMENT
Hundred Thousand
WORKS ( f) Added for each additional lift of 0.3 m beyond 1.5 m and up
10 2.f Cum 545.000 280.001 and Eighty 152600.545 Six
EARTHWORK IN to 3 m (Depth of 3.0 m)
point Zero Hundred
EXCAVATION OF
Zero One point Five
POND)
Four Five

PART-A-ii : SITE One Lakh

Two
DEVELOPMENT Fifty-Eight
Hundred
WORKS ( g) Added for each additional lift of 0.3 m beyond 3 m and up Thousand
11 2.g Cum 545.000 290.001 and Ninety 158050.545
EARTHWORK IN to 4.5 m (Depth of 3.3 m) AND Fifty
point Zero
EXCAVATION OF point Five
Zero One
POND) Four Five

One Lakh
PART-A-ii : SITE Sixty-
DEVELOPMENT Three Three
WORKS ( h) Added for each additional lift of 0.3 m beyond 3 m and up Hundred Thousand
12 2.h Cum 545.000 300.001 163500.545
EARTHWORK IN to 4.5 m (Depth of 3.6 m) point Zero Five
EXCAVATION OF Zero One Hundred
POND) point Five
Four Five

PART-A-ii : SITE Thirty-Six

DEVELOPMENT Three Thousand
WORKS ( i) Added for each additional lift of 0.3 m beyond 3 m and up Hundred Six
13 2.i Cum 122.000 300.001 36600.122
EARTHWORK IN to 4.5 m (Depth of 3.9 m) point Zero Hundred
EXCAVATION OF Zero One point One
POND) Two Two

Two Lakh
Forty-Four
PART-A-ii : SITE
Cleaning and disposing of excavated earth from the Seven Thousand
DEVELOPMENT
construction site by truck or by any other means to a place Hundred Five
WORKS (
14 3 within 30 km radius of the city or town area including loading Cum 335.000 730.001 and Thirty 244550.335 Hundred
EARTHWORK IN
& unloading at both ends, leveling and dressing the carried point Zero and Fifty
EXCAVATION OF
earth etc. complete and accepted by the Engineer-in-charge. Zero One point
POND)
Three
Three Five

Twelve
Earth filling in foundation/ side slope trenches and plinth in
PART-A-ii : SITE Lakh
150 mm layer with earth available within 90 m of the building
DEVELOPMENT Two Sixty-Eight
site to achive minimum dry density of 95% with optimum
WORKS ( Hundred Thousand
15 4 moisture content (Modified proctor test) including carrying Cum 6340.000 200.001 1268006.340
EARTHWORK IN point Zero AND Six
watering, leveling, dressing and compacting to a specified
EXCAVATION OF Zero One point
percentage Each layer up to finished level etc. all complete
POND) Three
and accepted by Engineer-in-charge.
Four

Four Four
PART-A-ii : SITE
Hundred Thousand
DEVELOPMENT Bailing out water by 1 cusec electricity operated pump
and Seven
WORKS ( including hire charge of pump, fuel, operator, spares and
16 5 Per Hour 10.000 474.001 Seventy- 4740.010 Hundred
EARTHWORK IN maintenance etc. all complete and accepted by the Engineer-
Four point and Forty
EXCAVATION OF in-charge.
Zero Zero point Zero
POND)
One One

Providing layout and carry over PWD bench-mark (BM) at Twenty-

site from nearby BM pillar, property lines, existing ground Eight
level (EGL), formation ground level (FGL), highest flood Thousand
PART-B-i : Twenty
levels (HFL), plinth levels (PL), mean sea level (MSL), setting Two
17 BOUNDARY WALL 1 Sqm 1410.000 20.001 point Zero 28201.410
and marking all pillars, marker, pegs etc. showing and Hundred
( CIVIL WORKS) Zero One
maintaining reduced levels (RL's) including locating, and One
establishing, protecting all public utilities within the premise point Four
of work and finally all to be presented in black and white. One

Mobilization and cleaning site before commencing actual

physical work and during contract period and demobilization
after completion of the works under contract to be accepted Two Lakh
by the Engineer-in-charge. This work shall also cover Ninety-
cleaning and clearing, cutting or filling, dressing the project Three
Two
area on and in the ground to an extent that all the events of Thousand
PART-B-i : Hundred
works of the project can be executed smoothly in a working Two
18 BOUNDARY WALL 2 Sqm 1410.000 208.001 and Eight 293281.410
environment with a particular attention on safety and security Hundred
( CIVIL WORKS) point Zero
in all respects, and to stockpile the end outcome to a place and
Zero One
for disposal agreed by the Engineer-in-charge, where, Eighty-
payments are to be based on ground area determined by the One point
Engineer-in-charge and be proportionate to the percentage Four One
progress of work under contract as a whole in all respects
and approved by the Engineer-in-charge.

''Earth work in excavation in all kinds of soil for foundation

trenches including layout, providing center lines, local bench-
mark pillars, levelling, ramming and preparing the base,
fixing bamboo spikes and marking layout with chalk powder, Twenty-
providing necessary tools and plants, protecting and Six
maintaining the trench dry etc., stacking, cleaning the Thousand
PART-B-i : excavated earth at a safe distance out of the area enclosed Nineteen Seven
19 BOUNDARY WALL 3.a by the layout etc. all complete and accepted by the Engineer- Sqm 1410.000 19.001 point Zero 26791.410 Hundred
( CIVIL WORKS) in-charge, subject to submit method statement of carrying out Zero One and
excavation work to the Engineer-in-charge for approval. Ninety-
However, engineer's approval shall not relieve the contractor One point
of his responsibilities and obligations under the contract. Four One
a) Layout and marking for earthwork in excavation in
foundation accepted by the Engineer-in-charge. [Plinth area
of the structure shall be considered for measurement]''

One Lakh
Sixty-Four
One
Thousand
PART-B-i : Hundred
Earthwork in excavation in foundation trenches up to 1.5 m Eight
20 BOUNDARY WALL 3.b cum 1030.000 160.001 and Sixty 164801.030
depth and maximum 10 m lead Hundred
( CIVIL WORKS) point Zero
and One
Zero One
point Zero
Three

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 2/80
3/11/24, 2:55 PM View Form
One Lakh
Four Twenty-
Hundred Two
PART-B-i :
Bailing out of trapped water caused by inundation or rain, by and Thousand
21 BOUNDARY WALL 4 hour 260.000 470.001 122200.260
pump from foundation trenches. Seventy Two
( CIVIL WORKS)
point Zero Hundred
Zero One point Two
Six

Earth filling in foundation trenches and plinth in 150 mm layer

One Lakh
with earth available within 90 m of the building site to achive
Two Twenty-
PART-B-i : minimum dry density of 95% with optimum moisture content
Hundred Four
22 BOUNDARY WALL 5 (Modified proctor test) including carrying watering, leveling, cum 620.000 200.001 124000.620
point Zero Thousand
( CIVIL WORKS) dressing and compacting to a specified percentage each
Zero One point Six
layer up to finished level etc. all complete and accepted by
Two
Engineer-in-charge.

Fifteen
Thousand
Supplying and laying of single layer polythene sheet
PART-B-i : Forty point Two
weighing one kilogram per 6.5 square meter in floor or any
23 BOUNDARY WALL 6 Sqm 380.000 40.001 Zero Zero 15200.380 Hundred
where below cement concrete complete in all respect and
( CIVIL WORKS) One point
accepted by Engineer-in-charge.
Three
Eight

''Lean / blinding concrete (1:3:6) in foundation or in floor with

cement, sand (F.M. 1.2) and picked jhama brick chips Nine Two Lakh
including breaking of chips, screening, mixing, laying, Thousand Eighty
PART-B-i : compacting to required level and curing for at least 7 days Three Thousand
24 BOUNDARY WALL 7 including the supply of water, electricity, costs of tools & cum 30.000 9360.001 Hundred 280800.030 Eight
( CIVIL WORKS) plants and other charges etc. all complete and accepted by and Sixty Hundred
the Engineer-in-charge.(Cement: CEM-II/B-M) point Zero point Zero
a) Lean / blinding concrete in foundation (1:3:6) with cement, Zero One Three
brick chips and sand of F.M. 1.2''

Brick works with first class bricks with cement sand (F.M. 1.2) Forty-Six
mortar (1:4) in exterior walls including filling the interstices Lakh
Ten
with mortar, raking out joints, cleaning and socking the bricks Sixty-Four
Thousand
at least for 24 hours before use and washing of sand, Thousand
PART-B-i : AND
necessary scaffolding, curing at least for 7 days etc. all Eight
25 BOUNDARY WALL 8 cum 462.000 10097.001 Ninety- 4664814.462
complete including cost of water, electricity and other Hundred
( CIVIL WORKS) Seven
charges (measurement to given as 250 mm width for one and
point Zero
brick length and 375 mm for one brick and a half brick length) Fourteen
Zero One
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M) point Four
i) Ground floor Six Two

''125 mm brick works with first class bricks with cement sand
(F.M. 1.2) mortar (1:4) and making bond with connected walls One
Fourteen
including necessary scaffolding, raking out joints, cleaning Thousand
Thousand
PART-B-i : and soaking the bricks for at least 24 hours before use and Four
AND
26 BOUNDARY WALL 9 washing of sand, curing at least for 7 days in all floors Sqm 10.000 1408.001 Hundred 14080.010
Eighty
( CIVIL WORKS) including cost of water, electricity and other charges etc. all and Eight
point Zero
complete and accepted by the Engineer-in-charge. (Cement: point Zero
One
CEM-II/B-M) Zero One
i) Ground floor''

Pre-cast pile made in reinforced cement concrete with

minimum cement content relates to mix ratio 1:1.25:2.5
having minimum f'cr = 38.5 Mpa, and satisfying specified
compressive strength f?c = 30 Mpa at 28 days on standard
cylinders as per standard practice of Code ACI/BNBC/ASTM
& cement conforming to BDS EN-197-1- CEM-I (52.5 N) /
ASTM-C 150 Type ? I, best quality coarse sand (F.M.2.2), 20
mm down well graded crushed stone chips conforming to
ASTM C-33, mixing in standard mixture machine and fed by
Twenty Fifty-Nine
PART-B-i : standard measuring boxes, including all related works like
Thousand Lakh point
27 BOUNDARY WALL 10 screening through proper sieves, cleaning and washing, Cum 295.000 20000.001 5900000.295
point Zero Two Nine
( CIVIL WORKS) centering and placing reinforcement cages in position,
Zero One Five
casting, compacting by vibrators and tapered rods as where
necessary, curing for 28 days etc. cost of water, electricity
and other charges, providing fitting and fixing pile shoe in
position, tools, plants & equipments, mobilization,
demobilization, labour, test of materials and concrete etc. all
complete as per design, drawing and accepted by the
Engineer-in-charge. (Rate is excluding the cost of
reinforcement and its fabrication, binding, welding and
placing)

Cost of bed preparation including one layer brick flat soling Ninety-
with first class/picked jhama bricks including preparation of Eight
bed and filling the interstices with local sand, leveling etc. Three Thousand
complete and accepted by the Engineer-in-charge, Minimum Hundred One
PART-B-i : 12 mm thick cement sand (F.M. 1.2) plaster with neat cement and Hundred
28 BOUNDARY WALL 11 finishing with cement (1:4) including washing of sand, Sqm 303.000 324.001 Twenty- 98172.303 and
( CIVIL WORKS) finishing the edges and corners and curing at least for 7 Four point Seventy-
days, cost of water, electricity, scaffolding and other charges Zero Zero Two point
etc. all complete in all respect and accepted by the Engineer- One Three
in-charge (Cement: CEM-II/B-M) and polythene as separator Zero
between pile layers during casting concrete Three

Four Lakh
Centering and shuttering, including strutting, propping etc.
Twenty-
(The formwork must be rigid enough both in and out of plane,
Four Seven
to make the concrete surface true to the designed shape and
PART-B-i : Hundred Thousand
size by using necessary MS sheets of minimum 18 BWG,
29 BOUNDARY WALL 12 Sqm 1045.000 409.001 and Nine 427406.045 Four
angles of minimum size 1.5 x 1.5 x 3/16'' for sides,angles of
( CIVIL WORKS) point Zero Hundred
minimum size 1 x 1 x 3/16'' for frames , 1.5'' x 3/16'' flat bars
Zero One and Six
etc.) and removal of form for precast pile (The formwork is
point Zero
considered for two sides and front shuttering of the pile)
Four Five

30 PART-B-i : 13 Pre-cast pile shoe making & supplying pre-fabricated frustum Each 346.000 3326.001 Three 1150796.346 Eleven
BOUNDARY WALL of square cone having four sides and a toe made of 6 mm Thousand Lakh Fifty
( CIVIL WORKS) thick ASTM A36 complied MS steel plate jointed by line Three Thousand
welding, 4 nos 12 mm dia deformed MS bar jointed by line Hundred Seven
welding with MS plate along the four edges of shoe aligning and Hundred
the corner main bar of the pile and 1-12mm dia bar to fix with Twenty- and
and perpendicular to shoe toe plate aligning centre of pile, Six point Ninety-Six

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 3/80
3/11/24, 2:55 PM View Form
including cutting, shaping, sizing of MS plate and bar, all Zero Zero point
complete as per design & drawing and accepted by the One Three
Engineer-in-charge. Four Six

One Lakh One Lakh

Eighty-Six Eighty-Six
Thousand Thousand
PART-B-i :
Mobilization and demobilzation of automatic diesel hammer Per set per Five Five
31 BOUNDARY WALL 14 1.000 186508.001 186508.001
mounted complete rig set. site Hundred Hundred
( CIVIL WORKS)
and Eight and Eight
point Zero point Zero
Zero One Zero One

Thirty-
Three
Driving 300 mm x 300 mm & 350 mm x 350 mm size pre-cast
Lakh Eight
pile by rig fitted with automatic diesel operated hammer. Nine
Thousand
Before commencing driving operation by rig fitted with Hundred
PART-B-i : Six
automatic diesel operated hammer, contractor shall submit and
32 BOUNDARY WALL 15 Meter 3620.000 914.001 3308683.620 Hundred
method statement for carrying out the operation including Fourteen
( CIVIL WORKS) and
sequence of driving to the Engineer-in-charge for approval. point Zero
Eighty-
However, engineer's approval shall not relieve the contractor Zero One
Three
of his responsibilities and obligations under contract.
point Six
Two

Labour for breaking head of hardened cast in situ bored

pile/pre-cast pile up to a required length by any means but
Three
without damaging the rest and removing the dismantled
Thousand Thirty-Five
materials such as concrete to a safe distance including
Five Thousand
scraps and cleaning concrete from steel/M.S. rods,
PART-B-i : Hundred Nine
straightening and bending of pile bars, preparation and
33 BOUNDARY WALL 16 Cum 10.000 3595.001 and 35950.010 Hundred
making platform where necessary, carrying, all sorts of
( CIVIL WORKS) Ninety- and Fifty
handling, stacking the same properly after clearing, leveling
Five point point Zero
and dressing the situ and clearing the bed etc. complete in all
Zero Zero One
respect and accepted by the Engineer-in-charge.
One
(Measurement will be given for the actual pile head volume
to be broken)

''Reinforced cement concrete works with minimum cement

content relates to mix ratio 1:1.5:3 having maximum water
cement ratio = 0.40 and minimum f'cr = 33.5 MPa, satisfying
a specified compressive strength f?c = 25 MPa at 28 days on
standard cylinders as per standard practice of Code
ACI/BNBC/ASTM, Cement conforming to BDS EN-197-1-
CEM-I, 52.5N (52.5 MPa) / ASTM-C 150 Type ? I, best
quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and
20 mm down well graded stone chips conforming to ASTM C-
Thirty-One
33 (Aggregate grading as per table shown in technical
Lakh
specification), conducting necessary tests, making and Eighteen
PART-B-i : Fourteen
placing shutter in position and maintaining true to plumb, Thousand
34 BOUNDARY WALL 17.1.a Cum 173.000 18000.001 3114000.173 Thousand
making shutter water-tight properly, placing reinforcement in point Zero
( CIVIL WORKS) point One
position; mixing with standard mixer machine with hopper, Zero One
Seven
fed by standard measuring boxes, casting in forms,
Three
compacting by vibrator machine and curing at least for 28
days, removing centering-shuttering after specified time
approved; including cost of water, electricity, other charges
etc. all complete, approved and accepted by the Engineer-in-
charge. (Rate is excluding laboratory test fees, the cost of
reinforcement and its fabrication, placing, binding etc. and
the cost of shuttering & centering)
a) Individual & combined footing
1) Casting''

Three
''2) FORM WORK (Steel) Centering and shuttering, including Five
Lakh Fifty-
strutting, propping etc. (The formwork must be rigid enough Hundred
Five
PART-B-i : both in and out of plane, to make the concrete surface true to and
Thousand
35 BOUNDARY WALL 17.2.a the designed shape and size by using necessary MS sheets Sqm 610.000 582.001 Eighty- 355020.610
AND
( CIVIL WORKS) of minimum 16 BWG, angles of minimum size 40 mm x 40 Two point
Twenty
mm x 5 mm, flat bars etc.) and removal of form for: Zero Zero
point Six
a) Individual & combined footing'' One
One

Twenty-
Eighteen Nine Lakh
PART-B-i :
''Foundation Beam Thousand Sixteen
36 BOUNDARY WALL 17.1.b Cum 162.000 18000.001 2916000.162
1) Casting'' point Zero Thousand
( CIVIL WORKS)
Zero One point One
Six Two

Seven
Lakh Fifty-
Four
Four
Hundred
Thousand
PART-B-i : and
Two
37 BOUNDARY WALL 17.2.b 2) Form Work/Shuttering (steel) Sqm 1530.000 493.001 Ninety- 754291.530
Hundred
( CIVIL WORKS) Three
and
point Zero
Ninety-
Zero One
One point
Five Three

Forty-One
Lakh
Eighteen
PART-B-i : ''Pedestals, column, RCC Wall etc. Seventy-
Thousand
38 BOUNDARY WALL 17.1.c 1) Casting Cum 232.000 18000.001 4176000.232 Six
point Zero
( CIVIL WORKS) i) Gr floor'' Thousand
Zero One
point Two
Three Two

39 PART-B-i : 17.2.c ''2) Form Work/Shuttering (steel) Sqm 2695.000 522.001 Five 1406792.695 Fourteen
BOUNDARY WALL i) Gr floor'' Hundred Lakh Six
( CIVIL WORKS) and Thousand
Twenty- Seven
Two point Hundred
Zero Zero and
One Ninety-
Two point

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 4/80
3/11/24, 2:55 PM View Form
Six Nine
Five

Testing work of concrete cylinder [From BUET (BRTC), Four

KUET (CRTS), RUET (DCE), SUST (CRTC) & DUET (DCE)] Thousand
Nineteen
size 150mm dia and 300mm hight for testing compressive Eight
Thousand
PART-B-i : strength in the laboratory approved by the Engineer including Hundred
Five
40 BOUNDARY WALL 18 making cylinder using steel mould, curing the cylinder to the Set 4.000 4875.001 and 19500.004
Hundred
( CIVIL WORKS) laboratory payment of the testing fees etc. complete as per Seventy-
point Zero
direction of the Engineer in charge. (Payment should be Five point
Zero Four
made for the cylinders tested whoes strenght attain the Zero Zero
specified strength of the concrete.) One

''Supplying, fabrication and fixing to detail as per design :

ribbed or deformed bar reinforcement (excluding laboratory
test fees) for Reinforced concrete, produced and marked in
accordance with BDS ISO 6935-2:2016 (or standard
subsequently released from BSTI) including straightening
and cleaning rust, if any, bending and binding in position with
supply of G.I. wires,conducting necessary laboratory tests One Crore
etc. (excluding splices or laps) complete in all respect and Fifty-
One Lakh
accepted by the Engineer-in-charge (Measurement shall be Seven
Twenty-
PART-B-i : recorded only on standard mass per unit length of bars, while Lakh
Two
41 BOUNDARY WALL 19 dia of bars exceeds its standard) Ton 129.000 122000.001 15738000.129 Thirty-
Thousand
( CIVIL WORKS) Grade 400 (B400DWR / B420DWR: complying BDS ISO Eight
point Zero
6935-2:2016 / ASTM A615) ribbed or deformed bar produced Thousand
Zero One
and marked according to Bangladesh standard, with point One
minimum yield strength, fy (ReH)= 400 MPa but fy not Two Nine
exceeding 480 MPa and whatever is the actual yield strength
within allowable limit as per BNBC/ ACI 318, the ratio of
ultimate tensile strength fu to yield strength fy, shall be at
least 1.25 and minimum elongation after fracture and
minimum total elongation at maximum force is 17% and 8%
respectively: i) Ground floor''

''WH: Providing weep holes in Brick masonry/ Plain/

Reinforced concrete retaining wall, abutment, wing/ return Three
Six
wall, with 50 - 100 mm dia PVC pipe extending through the Lakh
Hundred
full width of structure with slope 1V : 20H towards draining Seven
PART-B-i : and
face including hand packing of 0.85 cum pervious backfill Hundred
42 BOUNDARY WALL 20 each 480.000 626.651 Twenty- 300792.480
material (40mm - 63mm sized 1st class/picked brick) and
( CIVIL WORKS) Six point
wrapped in filter fabric in the back of each weep hole etc. all Ninety-
Six Five
compete as per direction of the E-I-C. Two point
One
[Cost of PVC pipe is included in this item and shall not be Four Eight
paid separately.]''

Fifteen
Minimum 12 mm thick cement sand (F.M. 1.2) plaster with Lakh
Three
neat cement finishing to plinth wall with cement (1:4) up to Seventy-
Hundred
150 mm below ground level including washing of sand, Three
PART-B-i : and
finishing the edges and corners and curing at least for 7 Thousand
43 BOUNDARY WALL 21 Sqm 4130.000 381.001 Eighty- 1573534.130
days, cost of water, electricity, scaffolding and other charges Five
( CIVIL WORKS) One point
etc. all complete in all respect as per drawing and accepted Hundred
Zero Zero
by the Engineer-in-charge. (Cement: CEM-II/B-M) i) Ground and Thirty-
One
Floor Four point
One Three

Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:4) One Lakh
Three
with fresh cement to both inner-and outer surface of wall, Thirty-Two
Hundred
PART-B-i : finishing the corner and edges including washing of sand, Thousand
and
44 BOUNDARY WALL 22 cleaning the surface, curing at least for 7 days, cost of water, Sqm 420.000 315.001 132300.420 Three
Fifteen
( CIVIL WORKS) electricity, scaffolding and other charges etc. all complete in Hundred
point Zero
all respect as per drawing and accepted by the Engineer-in- point Four
Zero One
charge. (Cement: CEM-II/B-M) i) Ground floor Two

Three
Minimum 6 mm thick cement sand (F.M. 1.2) plaster (1:4) Lakh
with fresh cement to ceiling, R.C.C. columns, beams, surface Eighty-
of stair case, sunshades, cornices, railings, drop wall, Three Eight
PART-B-i : louvers, fins and finishing the corners and edges including Hundred Thousand
45 BOUNDARY WALL 23 washing of sand, cleaning the surface, curing at least for 7 Sqm 1290.000 301.001 and One 388291.290 Two
( CIVIL WORKS) days, cost of water, electricity, scaffolding and other charges point Zero Hundred
etc. all complete in all respect as per drawing and accepted Zero One and
by the Engineer-in-charge. (Cement: CEM-II/B-M) i) Ground Ninety-
floor One point
Two Nine

Exterior premium acrylic emulsion paint of approved best

quality and color with high performance against dirt picking
tendency and efflorosence resistence properties along with
water resisting properties and resistance properties against
fungi, fading and flaking from authorized local agent of the
One Lakh
manufacturer in a sealed container; applying to exterior
Two Eighty-
surface with surface preparation including cleaning drying,
Hundred Seven
making free from dirt, grease, wax, removing all chalked and
PART-B-i : and Thousand
scaled materials, fungus, mending good the surface defects
46 BOUNDARY WALL 24 Sqm 630.000 298.001 Ninety- 187740.630 Seven
using sand paper and necessary scaffolding; applying
( CIVIL WORKS) Eight point Hundred
necessary exterior sealer of specified brand on prepared
Zero Zero and Forty
surface; then applying necessary exterior putty of specified
One point Six
brand for levelling, spot filling, crack filling and cutting by
Three
sand paper/zero water paper; finally applying 2 coats of
exterior emulsion paint spreading by brush/roller/spray &
necessary scaffolding etc. upto desired finishing, elapsing
specified time for drying or recoating; all complete in all floors
and accepted by the Engineer-in-charge.

Thirty-
Supply, fabrication and installation of hot rolled structural
Nine Lakh
grade steel pipe and tube of any thickness conforming to Two
PART-B-i : Sixty
ASTM A283 with a minimum yield strength of 275 MPa, Hundred
47 BOUNDARY WALL 25 Kg 19800.000 200.001 3960019.800 Thousand
including the cost of testing, application of red/grey-oxide point Zero
( CIVIL WORKS) AND
primer etc. (up to level-4) all complete as per drawing, Zero One
Nineteen
specification and direction of Engineer-in-charge.
point Eight

48 PART-B-i : 26 Supply, fabrication and installation of built-up sections i.e. Kg 1400.000 137.001 One 191801.400 One Lakh
BOUNDARY WALL columns, beams, rafters, bracings, struts etc. (up to level-4) Hundred Ninety-
( CIVIL WORKS) from steel plates conforming to ASTM A572, with a minimum and Thirty- One
yield strength of 345 MPa, including the cost of testing of Seven Thousand

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 5/80
3/11/24, 2:55 PM View Form
plates, applicaton of red/ grey-oxide primer etc. all complete point Zero Eight
as per drawing, specification and direction of Engineer-in- Zero One Hundred
charge. and One
point Four

Twenty-
Supply, fabrication and installation of hot rolled structural One Four Lakh
grade steel channel and angle in roof truss or any form of Hundred Thirty-One
PART-B-i : structure of any thickness conforming to ASTM A36 with a and Thousand
49 BOUNDARY WALL 27 minimum yield strength of 250 MPa, including the cost of Kg 18850.000 129.001 Twenty- 2431668.850 Six
( CIVIL WORKS) testing, application of red/grey-oxide primer etc. (up to level- Nine point Hundred
4) all complete as per drawing, specification and direction of Zero Zero and Sixty-
Engineer-in-charge. One Eight point
Eight Five

Three
Supply and fixing of galvanized anchor bolts of variable dia Lakh
One
for rigid frame conforming to ASTM F1554 Grade 55, Thirty-
Hundred
Galvanized to A153, Class C or equivalent with minimum Four
PART-B-i : and
yield strength of 380 MPa, manual of steel construction by Thousand
50 BOUNDARY WALL 28 Kg 1740.000 192.001 Ninety- 334081.740
American Institute of Steel Construction (AISC) etc. including AND
( CIVIL WORKS) Two point
the cost of washer & bolts, material testing etc. all complete Eighty-
Zero Zero
as per drawing, specification and direction of the Engineer-in- One point
One
charge. Seven
Four

Supply and pouring of non-shrink grout to steel column One Lakh

Three
PART-B-i : bases conforming to ASTM C 109 having compressive Fifty
Lakh point
51 BOUNDARY WALL 29 strength not less than 45 MPa, including the cost of shutter Cum 2.000 150000.001 Thousand 300000.002
Zero Zero
( CIVIL WORKS) and necessary accessories, all complete as per drawing, point Zero
Two
specification and direction of Engineer-in-charge. Zero One

Premium Synthetic Enamel paint of approved best quality

and colour delivered from authorized local agent of the
manufacturer(Berger robbialac supergloss synthetic Three
enamel/Elite lucky seven/ Asian apcolipe premium paint or Lakh Sixty
equivalent brand) in a sealed container, having highly water Thousand
PART-B-i : Nine point
resistant, high bondibilty, flexiblity property; using specified Four
52 BOUNDARY WALL 30 Kg 40050.000 9.001 Zero Zero 360490.050
brand thinner applying to metallic surface by spray in two Hundred
( CIVIL WORKS) One
coats over single coat anti-corrosive coating including and Ninety
cleaning drying, making free from dirt, grease, wax, removing point Zero
all chalked and scaled materials, all complete in all floors Five
accepted by the Engineer-in-charge. (payment shall be made
on strucutral steel weight basis)

Supplying, fitting and fixing Chain-link fencing of mesh 50

mm x 50 mm, BWG-12 is a type of woven fence usually
made from galvanized or linear low-density polyethylene-
coated steel wire in boundary wall fixed with outer frame 50 Ten Lakh
mm x 50 mm x 5mm MS angle, horizontally 40 mm x 40 mm Nine Thirty-Six
x 5mm MS angle and diagonally 25 mm x 25 mm x 5mm MS Hundred Thousand
PART-B-i :
angle placed after cutting as per required measurement. All and Thirty- Seven
53 BOUNDARY WALL 31 Sqm 1110.000 934.001 1036741.110
members were fixed in position by welding, finishing with two Four point Hundred
( CIVIL WORKS)
coats of painting with synthetic enamel paint over a coat of Zero Zero and Forty-
anti-corrosive paint etc. including cost of wire mesh, One One point
electricity, tools and plants, workshop charges, carriage of One One
the same. All complete as per drawing and design and
accepted by the Engineer-in-charge. (Rate is excluding the
cost of painting)

''Concealed conduit point wiring (BYM) (without switch):

Concealed conduit wiring for following point looping at the
switch board with earth terminal with 1C-2x1.5 sqmm PVC
insulated and sheathed stranded cable (BYM) & same size
PVC insulated ECC (BYA) (Green / White color) including
circuit wiring with IC-2x2.5 sqmm PVC insulated and
sheathed stranded cable (BYM) & same size PVC insulated
ECC (BYA) Green / White color through PVC conduit (one
conduit from switch board to common point on ceiling is
One Seventy-
considered to draw 3 pair of cable ) of reputed manufacturer
Thousand Five
of minimum 25 mm dia & 1.5 mm wall thickness complete
PART-B-ii : Two Thousand
with 18 SWG GP sheet / PVC switch board & pull box with
BOUNDARY WALL Hundred Six
54 1 3mm thick ebonite sheet cover, without switch, fixing Point 60.000 1261.001 75660.060
( ELECTRICAL and Sixty- Hundred
materials etc.(without switch) as required including mending
WORKS) One point and Sixty
the damages good. All electrical contacts shall be of brass /
Zero Zero point Zero
copper connected through connector or soldering (no twisting
One Six
shall be allowed) and cables shall be manufactured and
tested according to relevant IEC / BDS / BS / VDE standards
and as per detailed specification mentioned in Annexure-1.
The work shall be carried out as per direction & approval of
the Engineer.
Cable manufacturer(s) must have valid test certificate (within
last seven years ) from internationally accrediated laboratory
(like CPRI, KEMA etc) accepted / approved by the Engineer.
1.1) Light/ exhaust or wall bracket fan point''

''Concealed wiring (BYM): Concealed conduit wiring with

following PVC insulated and sheathed stranded cable (BYM)
& PVC insulated Green / White coloured ECC wire (BYA)
through PVC conduit of reputed manufacturer complete with
18 SWG GP sheet and pull box with 3mm thick ebonite sheet
cover, fixing materials etc. as required including mending the
damages good. All electrical contacts shall be of brass /
Two
copper connected through connector or soldering ( no Five Lakh
PART-B-ii : Hundred
twisting shall be allowed) and cables shall be manufactured Twenty-
BOUNDARY WALL and Sixty-
55 2 and tested according to relevant IEC / BDS / BS / VDE Rm 2000.000 261.001 522002.000 Two
( ELECTRICAL One point
standards and as per detailed specification mentioned in Thousand
WORKS) Zero Zero
Annexure-1. The work shall be carried out as per direction & AND Two
One
approval of the Engineer.
Cable manufacturer(s) must have valid test certificate (within
last seven years) from internationally accrediated laboratory
(like CPRI, KEMA etc) accepted / approved by the Engineer.
2.1) 1C-2x2.5sqmm (BYM) cable with 2.5sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 16 mm having
wall thickness of 1.5 mm''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 6/80
3/11/24, 2:55 PM View Form
''Concealed wiring (NYY) (through PVC conduit): Concealed
conduit wiring with the following PVC insulated and sheathed
stranded cable (NYY) / XLPE insulated and PVC sheathed
stranded cable (2XY) & PVC insulated Green / Yellow bi-
colour ECC wire (BYA) through PVC conduit of reputed
manufacturer complete with fixing materials other
accessories etc. as required including mending the damages
Five
good. All electrical contacts shall be of brass / copper
Hundred
PART-B-ii : connected through connector or soldering (no twisting shall Two Lakh
and
BOUNDARY WALL be allowed) and cables shall be manufactured and tested Sixty-Four
56 3 Rm 500.000 528.001 Twenty- 264000.500
( ELECTRICAL according to IEC / BS / VDE standards along with relevant Thousand
Eight point
WORKS) BDS standard as per detailed specification mentioned in point Five
Zero Zero
Annexure-1. The work shall be carried out as per direction &
One
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge.
a) 1C-4x2.5 sqmm (NYY / 2XY) with 2.5 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 30 mm having
wall thickness of 1.9 mm.''

''SURFACE WIRING (BYM) (THROUGH PVC CONDUIT):

Surface conduit wiring with the following PVC insulated and
sheathed cable (BYM) & Green / Yellow bi-colour PVC
insulated ECC wire (BYA) through PVC conduit of reputed
manufacturer complete with 18 SWG GP sheet pull box with
3 mm thick ebonite sheet cover, fixing materials, other
accessories etc. as required including mending the damages
One
good. All electrical contacts shall be of brass / copper Nine
Hundred
PART-B-ii : connected through connector or soldering (no twisting shall Thousand
and
BOUNDARY WALL be allowed) and cables shall be manufactured and tested Six
57 4.1 Rm 50.000 192.001 Ninety- 9600.050
( ELECTRICAL according to IEC / BS / VDE standards along with relevant, Hundred
Two point
WORKS) BDS standard as per detailed specification mentioned in point Zero
Zero Zero
Annexure-1. The work shall be carried out as per direction & Five
One
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge.
4.1) 1C-2x1.5 sqmm (BYM) cable with 1.5 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 20 mm having
wall thickness of 1.5 mm''

Two
Thirteen
PART-B-ii : Hundred
1C-2x2.5sqmm (BYM) cable with 2.5 sqmm (BYA) ECC wire Thousand
BOUNDARY WALL and Sixty-
58 4.2 through PVC pipe of minimum inner dia 25 mm having wall Rm 50.000 261.001 13050.050 AND Fifty
( ELECTRICAL One point
thickness of 1.7 mm point Zero
WORKS) Zero Zero
Five
One

Three Sixteen
PART-B-ii : Hundred Thousand
1C-2x4.0 sqmm (BYM) cable with 4 sqmm (BYA) ECC wire
BOUNDARY WALL and Thirty- Nine
59 4.3 through PVC pipe of minimum inner dia 25 mm having wall Rm 50.000 338.001 16900.050
( ELECTRICAL Eight point Hundred
thickness of 1.7 mm
WORKS) Zero Zero point Zero
One Five

Twenty-
Four
One
PART-B-ii : Hundred
1C-2x6.0 sqmm (BYM) cable with 6 sqmm (BYA) ECC wire Thousand
BOUNDARY WALL and Thirty-
60 4.4 through PVC pipe of minimum inner dia 25 mm having wall Rm 50.000 436.001 21800.050 Eight
( ELECTRICAL Six point
thickness of 1.7 mm Hundred
WORKS) Zero Zero
point Zero
One
Five

''SURFACE WIRING (NYY) (THROUGH PVC CONDUIT) :

Surface conduit wiring with the following PVC insulated and
sheathed stranded cable (NYY) / XLPE insulated and PVC
sheathed stranded cable (2XY) & PVC insulated Green /
Yellow bi-colour , ECC wire (BYA) through PVC conduit of
reputed manufacturer complete with fixing materials, other
accessories etc. as required including mending the damages One Two Lakh
good. All electrical contacts shall be of brass / copper Thousand Fifty-Six
PART-B-ii : connected through connector or soldering (no twisting shall Seven Thousand
BOUNDARY WALL be allowed) and cables shall be manufactured and tested Hundred Six
61 5 Rm 150.000 1711.001 256650.150
( ELECTRICAL according to IEC / BS / VDE standards along with relevant and Hundred
WORKS) BDS standard as per detailed specification mentioned in Eleven and Fifty
Annexure-1. The work shall be carried out as per direction & point Zero point One
approval of the Engineer In Charge. Cable manufacturer(s) Zero One Five
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge .
a) 1C-4x16sqmm (NYY / 2XY) with 16 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 40 mm having
wall thickness of 2.2 mm''

''UNIVERSAL COMBINED SWITCH SOCKET OUTLET

(SURFACE/CONCEALED TYPE):
Providing & fixing 250 volt single phase universal combined
One
switch socket outlet (surface / concealed type) Manufactured/
Thousand
Assembled and tested in accordance with IEC / VDE / NEMA Nine
Eight
PART-B-ii : / BS / JIS along with relevant BDS IEC standards mounted Hundred
Hundred
BOUNDARY WALL on required size 18 SWG galvanized plain sheet board / and Forty-
62 6 each 2.000 942.001 1884.002 and
( ELECTRICAL plastic board (self-extinguishing 650 degree centigrade) of Two point
Eighty-
WORKS) 76.2 mm. (3'''') depth. Sample to be approved by the Zero Zero
Four point
Engineer-in-charge.Manufacturer shall have certificate of One
Zero Zero
standard which they follow.
Two
i) 13 / 15 / 16 / 20 Amps.
Made in HONGKONG / MALAYSIA / SINGAPORE / S
KOREA / THAILAND''

63 PART-B-ii : 7.1 ''GANG SWITCH: each 5.000 218.001 Two 1090.005 One
BOUNDARY WALL Providing & fixing 250 volts. 5 / 6 amps (minimum) concealed Hundred Thousand
( ELECTRICAL type following switch / switch socket manufactured and and AND
WORKS) tested in accordance with relevant IEC / VDE / NEMA / BS / Eighteen Ninety
JIS standards mounted on required size 18 SWG galvanized point Zero point Zero
plain sheet / PVC board (Self-extinguishing 650oC) of 76.2 Zero One Zero Five
mm (3'''') depth. All electrical contacts shall be of brass /

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 7/80
3/11/24, 2:55 PM View Form
copper.
Made in HONGKONG / MALAYSIA / SINGAPORE / S
KOREA / THAILAND
7.1) One gang switch''

Two
Five Thousand
PART-B-ii : Hundred Five
BOUNDARY WALL and Hundred
64 7.2 Three gang switch each 5.000 514.001 2570.005
( ELECTRICAL Fourteen and
WORKS) point Zero Seventy
Zero One point Zero
Zero Five

Three
Seven Thousand
PART-B-ii : Hundred Eight
BOUNDARY WALL and Sixty- Hundred
65 7.3 Four gang switch each 5.000 763.001 3815.005
( ELECTRICAL Three and
WORKS) point Zero Fifteen
Zero One point Zero
Zero Five

''STREET LIGHT FITTINGS (LED):

Supply & fixing LED street light fittings of following
specifications:
Luminous efficacy: 100lm/w (minimum),
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :70≤Ra< 85
Driver: Should be of IEC standard such as
Thirteen Seven
MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or
Thousand Lakh
PART-B-ii : equivalent. LED chips :EPISTAR / OSRAM /
Two Ninety-
BOUNDARY WALL SIGNIFY(PHILIPS) / CREE / BRIDGELUX or equivalent.
66 8 each 60.000 13250.001 Hundred 795000.060 Five
( ELECTRICAL Colour temperature : 3500K-6500K (Warm-White)
and Fifty Thousand
WORKS) Material: Aluminium aloy
point Zero point Zero
Model & sample to be accepted / approved by the Engineer-
Zero One Six
in-charge (with 2 years warranty). Gloria Cat. No: GLST.1243
Energy+ EPSTL-18012
Cosmo Cat No. BDTCL- LSTLSMD-02
Asha Cat No. ACS-LSL 2313
or equivalent products of
SUNKO/Annyesha/SHWASH/Crescent or equivalent foreign
made. 150W''

CIRCUIT BREAKER (SPMCB): Providing & fixing on a Fifteen

Seven
PART-B-ii : prepared board 250 volt grade following single pole miniature Thousand
Hundred
BOUNDARY WALL circuit breaker (SPMCBS) having minimum breaking capacity Six
67 9.a each 20.000 780.001 and Eighty 15600.020
( ELECTRICAL 6-KA with thermal over-current and instantaneous Hundred
point Zero
WORKS) electromagnetic short circuit release provision. as per point Zero
Zero One
SPMCBS accepted / approved by the engineer. a) 10 Amps. Two

Three
Seven
PART-B-ii : Thousand
Hundred
BOUNDARY WALL Nine
68 9.b 16 Amps. each 5.000 780.001 and Eighty 3900.005
( ELECTRICAL Hundred
point Zero
WORKS) point Zero
Zero One
Zero Five

''TPMCB : Providing & fixing on a prepared board 500 volt

Four Four
grade following Triple pole miniature circuit Breaker (TPMCB)
PART-B-ii : Thousand Thousand
having minimum breaking capacity 6-KA /10 KA with thermal
BOUNDARY WALL AND AND
69 10.a over-current and instantaneous electromagnetic short circuit each 1.000 4030.001 4030.001
( ELECTRICAL Thirty Thirty
release provision.
WORKS) point Zero point Zero
TPMCB accepted / approved by the engineer.
Zero One Zero One
a) 10 Amps.''

''TPMCCB: Providing & fixing on a prepared board 500 volt Seven Seven
grade following triple-pole molded case circuit breaker Thousand Thousand
PART-B-ii : (TPMCCB) with thermal over-current and instantaneous Four Four
BOUNDARY WALL electromagnetic short circuit release provision, manufactured Hundred Hundred
70 11 each 1.000 7466.001 7466.001
( ELECTRICAL and tested in accordance with relevant IEC / VDE / NEMA / and Sixty- and Sixty-
WORKS) BS / JIS standards. Six point Six point
TPMCCB accepted / approved by the engineer. Zero Zero Zero Zero
a) 60 Amps. (minimum 10-KA)'' One One

Two Two
''BUS - BAR: Providing and fixing 500 V 3-phase bus-bar
Thousand Thousand
system assembled in prelaid board with porcelain insulators.
PART-B-ii : Five Five
There will be equal size holes on every bar at 0.5'''' interval
BOUNDARY WALL Hundred Hundred
71 12 and bar to bar gap shall be 2'''' - 3''''. each 1.000 2544.001 2544.001
( ELECTRICAL and Forty- and Forty-
a) 60 - 100 Amps. Copper flat bar (5 nos) : 4 nos 9''''
WORKS) Four point Four point
x1''''x3mm and 1 no 4''''x1''''x4mm for earthing mounted on
Zero Zero Zero Zero
insulator at both ends individually.''
One One

''BOARD: Supplying and fixing of almirah type 18 SWG metal

board of depth 228mm (6?) duly painted with powder coating
with epoxy polyester resin on all surfaces of board (gray / off-
white) having built in push type / suitable locking
Eighteen Eighteen
arrangement including metal bridges of suitable size for fixing
Thousand Thousand
PART-B-ii : of all electrical control devices complete with suitable
Seven Seven
BOUNDARY WALL anchoring arrangement in wall / column and keeping
72 13 Sqm 1.000 18780.001 Hundred 18780.001 Hundred
( ELECTRICAL provision for cable inlets and exits as required (only front
and Eighty and Eighty
WORKS) surface of the board will be considered for measurement).
point Zero point Zero
(Manufactured by RECO / NASCO / C&S or equivalent
Zero One Zero One
product of any other manufacturer) The front side of the
boards should be covered with required size tempered thick
fiber glass with rubber gaskets to observe the inside
arrangement. ''

''PVC PIPE :
Providing & laying of following PVC pipe (best quality PVC
PART-B-ii : pipe of reputed manufacturer) embedded in wall / column /
Fifty point Five
BOUNDARY WALL ceiling / floor etc. with all accessories, 18 SWG GP sheet pull
73 14.a Rm 100.000 50.001 Zero Zero 5000.100 Thousand
( ELECTRICAL box with 3 mm thick ebonite sheet cover, fixing materials etc.
One point One
WORKS) as required including mending the damages good.
a) Minimum inner dia 20 mm & minimum wall thickness 1.5
mm. ''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 8/80
3/11/24, 2:55 PM View Form
One Lakh
PART-B-ii : Sixty-
Thirty-
BOUNDARY WALL b) Minimum inner dia 25 mm & minimum wall thickness 1.7 Seven
74 14.b Rm 2000.000 67.001 134002.000 Four
( ELECTRICAL mm. point Zero
Thousand
WORKS) Zero One
AND Two

Providing layout and carry over PWD bench-mark (BM) at Four

site from nearby BM pillar, property lines, existing ground Thousand
level (EGL), formation ground level (FGL), highest flood Thirty- Six
PART-C-i : GATE
levels (HFL), plinth levels (PL), mean sea level (MSL), setting Three Hundred
75 HOUSE ( CIVIL 1 Sqm 140.000 33.001 4620.140
and marking all pillars, marker, pegs etc. showing and point Zero and
WORKS)
maintaining reduced levels (RL's) including locating, Zero One Twenty
establishing, protecting all public utilities within the premise point One
of work and finally all to be presented in black and white. Four

Mobilization and cleaning site before commencing actual

physical work and during contract period and demobilization
after completion of the works under contract to be accepted
by the Engineer-in-charge. This work shall also cover Thirty
cleaning and clearing, cutting or filling, dressing the project Two Thousand
area on and in the ground to an extent that all the events of Hundred Five
PART-C-i : GATE
works of the project can be executed smoothly in a working and Hundred
76 HOUSE ( CIVIL 2 Sqm 140.000 218.001 30520.140
environment with a particular attention on safety and security Eighteen and
WORKS)
in all respects, and to stockpile the end outcome to a place point Zero Twenty
for disposal agreed by the Engineer-in-charge, where, Zero One point One
payments are to be based on ground area determined by the Four
Engineer-in-charge and be proportionate to the percentage
progress of work under contract as a whole in all respects
and approved by the Engineer-in-charge.

''Earth work in excavation in all kinds of soil for foundation

trenches including layout, providing center lines, local bench-
mark pillars, levelling, ramming and preparing the base,
fixing bamboo spikes and marking layout with chalk powder,
providing necessary tools and plants, protecting and Two
maintaining the trench dry etc., stacking, cleaning the Thousand
PART-C-i : GATE excavated earth at a safe distance out of the area enclosed Nineteen Six
77 HOUSE ( CIVIL 3.a by the layout etc. all complete and accepted by the Engineer- Sqm 140.000 19.001 point Zero 2660.140 Hundred
WORKS) in-charge, subject to submit method statement of carrying out Zero One and Sixty
excavation work to the Engineer-in-charge for approval. point One
However, engineer's approval shall not relieve the contractor Four
of his responsibilities and obligations under the contract.
a) Layout and marking for earthwork in excavation in
foundation accepted by the Engineer-in-charge. [Plinth area
of the structure shall be considered for measurement]''

One Ten
Hundred Thousand
PART-C-i : GATE
Earthwork in excavation in foundation trenches up to 1.5 m and Sixty- AND
78 HOUSE ( CIVIL 3.b Cum 60.000 168.001 10080.060
depth and maximum 10 m lead Eight point Eighty
WORKS)
Zero Zero point Zero
One Six

One
Hundred Nine
PART-C-i : GATE and Hundred
Added rate for each additional 0.5 meter depth exceeding 1.5
79 HOUSE ( CIVIL 3.c Cum 5.000 198.001 Ninety- 990.005 and Ninety
meter to 2.0 meter Depth
WORKS) Eight point point Zero
Zero Zero Zero Five
One

Five
Four Thousand
Hundred Six
PART-C-i : GATE and Hundred
Bailing out of trapped water caused by inundation or rain, by
80 HOUSE ( CIVIL 4 hour 12.000 474.001 Seventy- 5688.012 and
pump from foundation trenches.
WORKS) Four point Eighty-
Zero Zero Eight point
One Zero One
Two

One
Sand filling in foundation trenches and plinth with sand Twelve
Thousand
having min. F.M. 1.2 in 150 mm in layers including leveling, Thousand
Two
PART-C-i : GATE watering and compaction to achieve minimum dry density of Nine
Hundred
81 HOUSE ( CIVIL 5 95% with optimum moisture content (Modified proctor test) Cum 10.000 1296.001 12960.010 Hundred
and
WORKS) by ramming each layer up to finished level as per design and Sixty
Ninety-Six
supplied by the design office only, all complete and accepted point Zero
point Zero
by the Engineer-in-charge. One
Zero One

Earth filling in foundation trenches and plinth in 150 mm layer Eight

with earth available within 90 m of the building site to achive Two Thousand
PART-C-i : GATE minimum dry density of 95% with optimum moisture content Hundred Two
82 HOUSE ( CIVIL 6 (Modified proctor test) including carrying watering, leveling, Cum 40.000 207.001 and Seven 8280.040 Hundred
WORKS) dressing and compacting to a specified percentage each point Zero and Eighty
layer up to finished level etc. all complete and accepted by Zero One point Zero
Engineer-in-charge. Four

Forty-Four
Six Thousand
One layer brick flat soling in foundation or in floor with first Hundred Five
PART-C-i : GATE
class/picked jhama bricks (BDS 208) including preparation of and Thirty- Hundred
83 HOUSE ( CIVIL 7 Sqm 70.000 636.001 44520.070
bed and filling the interstices with local sand, leveling etc. Six point and
WORKS)
complete and accepted by the Engineer-in-charge. Zero Zero Twenty
One point Zero
Seven

Two
Thousand
Supplying and laying of single layer polythene sheet Forty-
PART-C-i : GATE Three
weighing one kilogram per 6.5 square meter in floor or any Seven
84 HOUSE ( CIVIL 8 Sqm 50.000 47.001 2350.050 Hundred
where below cement concrete complete in all respect and point Zero
WORKS) and Fifty
accepted by Engineer-in-charge. Zero One
point Zero
Five

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 9/80
3/11/24, 2:55 PM View Form
''Lean / blinding concrete (1:3:6) in foundation or in floor with Four
Nine
cement, sand (F.M. 1.2) and picked jhama brick chips Thousand
Thousand
including breaking of chips, screening, mixing, laying, Six
Three
PART-C-i : GATE compacting to required level and curing for at least 7 days Hundred
Hundred
85 HOUSE ( CIVIL 9 including the supply of water, electricity, costs of tools & Cum 0.500 9362.001 4681.001 and
and Sixty-
WORKS) plants and other charges etc. all complete and accepted by Eighty-
Two point
the Engineer-in-charge.(Cement: CEM-II/B-M) One point
Zero Zero
a) Lean / blinding concrete in foundation (1:3:6) with cement, Zero Zero
One
brick chips and sand of F.M. 1.2'' One

''Mass concrete (1:2:4) in foundation or in floor with cement,

Ten Forty-One
sand (F.M. 1.2) and picked jhama brick chips including
Thousand Thousand
breaking of chips, screening, mixing, laying, compacting to
Four Eight
PART-C-i : GATE required level and curing for at least 7 days including the
Hundred Hundred
86 HOUSE ( CIVIL 10 supply of water, electricity, costs of tools & plants and other Cum 4.000 10458.001 41832.004
and Fifty- and Thirty-
WORKS) charges etc. all complete and accepted by Engineer-in-
Eight point Two point
charge. (Cement: CEM-II/B-M)
Zero Zero Zero Zero
a) Mass concrete in floor (1:2:4) with brick chips and local
One Four
sand of F.M. 1.2.''

Twenty-
Brick works with first class bricks with cement sand (F.M. 1.2) Nine Two
mortar (1:6) in foundation and plinth, filling the Thousand Thousand
PART-C-i : GATE joints/interstices fully with mortar, racking out the joints, One Eight
87 HOUSE ( CIVIL 11 cleaning and soaking the bricks at least for 24 hours before Cum 2.500 9140.001 Hundred 22850.003 Hundred
WORKS) use and curing at least for 7 days etc. all complete including and Forty and Fifty
cost of water, electricity and other charges and accepted by point Zero point Zero
the Engineer-in-charge. (Cement: CEM-II/B-M) Zero One Zero
Three

''Brick works with first class bricks with cement sand (F.M.
Two Lakh
1.2) mortar (1:4) in exterior walls including filling the
Ten Thirty-Two
interstices with mortar, raking out joints, cleaning and socking
Thousand Thousand
the bricks at least for 24 hours before use and washing of
PART-C-i : GATE AND Two
sand, necessary scaffolding, curing at least for 7 days etc. all
88 HOUSE ( CIVIL 12 Cum 23.000 10097.001 Ninety- 232231.023 Hundred
complete including cost of water, electricity and other
WORKS) Seven and Thirty-
charges (measurement to given as 250 mm width for one
point Zero One point
brick length and 375 mm for one brick and a half brick length)
Zero One Zero Two
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M)
Three
i) Ground floor''

''125 mm brick works with first class bricks with cement sand Twenty-
(F.M. 1.2) mortar (1:4) and making bond with connected walls One One
including necessary scaffolding, raking out joints, cleaning Thousand Thousand
PART-C-i : GATE and soaking the bricks for at least 24 hours before use and Four One
89 HOUSE ( CIVIL 13 washing of sand, curing at least for 7 days in all floors Sqm 15.000 1408.001 Hundred 21120.015 Hundred
WORKS) including cost of water, electricity and other charges etc. all and Eight and
complete and accepted by the Engineer-in-charge. (Cement: point Zero Twenty
CEM-II/B-M) Zero One point Zero
i) Ground floor'' One Five

Providing brick works for 200 mm x 50 mm facing in

superstructure with 200 mm x 50 mm x 50 mm machine
made hard pressed klinker facing red or maroon strips of Two Six Lakh
approved quality with 20 mm thick cement sand (F.M.1.2) Thousand Forty-Five
mortar (1:4), 10 mm thick cement mortar in adjacent sides Nine Thousand
PART-C-i : GATE
including racking out joints and cutting the bricks to required Hundred Four
90 HOUSE ( CIVIL 14 Sqm 220.000 2934.001 645480.220
sizes wherever necessary with high class recessed pointing, and Thirty- Hundred
WORKS)
cleaning and soaking the bricks for at least 24 hours before Four point and Eighty
use and washing of sand, necessary scaffolding, curing at Zero Zero point Two
least for 7 days for all floors up to 4th floor including cost of One Two
water, electricity and other charges etc. all complete and
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M)

''38 mm thick artificial patent stone (1:2:4) flooring with

cement, best quality coarse sand (50% quantity of Sylhet Thirty-
sand or coarse sand of equivalent F.M. 2.2 and 50% best Seven Three
quality local sand of FM 1.2) and 12 mm down well graded Hundred Thousand
PART-C-i : GATE
stone chips, laying the concrete in alternate panels, and Forty- Seven
91 HOUSE ( CIVIL 15 Sqm 45.000 749.001 33705.045
compacting and finishing the top with neat cement and curing Nine point Hundred
WORKS)
at least for 7 days in all floors including cost of water, Zero Zero and Five
electricity and other charges etc. all complete and accepted One point Zero
by the Engineer-in-charge. Cement: (CEM-II/B-M) Four Five
i) Ground floor''

''Reinforced cement concrete works with minimum cement

content relates to mix ratio 1:1.5:3 having maximum water
cement ratio = 0.40 and minimum f'cr = 33.5 MPa, satisfying
a specified compressive strength f?c = 25 MPa at 28 days on
standard cylinders as per standard practice of Code
ACI/BNBC/ASTM, Cement conforming to BDS EN-197-1-
CEM-I, 52.5N (52.5 MPa) / ASTM-C 150 Type ? I, best
quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and
20 mm down well graded stone chips conforming to ASTM C-
33 (Aggregate grading as per table shown in technical
specification), conducting necessary tests, making and Twenty Eighty
PART-C-i : GATE
placing shutter in position and maintaining true to plumb, Thousand Thousand
92 HOUSE ( CIVIL 16.1.a Cum 4.000 20000.001 80000.004
making shutter water-tight properly, placing reinforcement in point Zero point Zero
WORKS)
position; mixing with standard mixer machine with hopper, Zero One Zero Four
fed by standard measuring boxes, casting in forms,
compacting by vibrator machine and curing at least for 28
days, removing centering-shuttering after specified time
approved; including cost of water, electricity, other charges
etc. all complete, approved and accepted by the Engineer-in-
charge. (Rate is excluding laboratory test fees, the cost of
reinforcement and its fabrication, placing, binding etc. and
the cost of shuttering & centering)
a) Individual & combined footing
1) Casting''

93 PART-C-i : GATE 16.2.a ''2) FORM WORK (Steel) Sqm 19.000 582.001 Five 11058.019 Eleven
HOUSE ( CIVIL Centering and shuttering, including strutting, propping etc. Hundred Thousand
WORKS) (The formwork must be rigid enough both in and out of plane, and AND Fifty-
to make the concrete surface true to the designed shape and Eighty- Eight point
size by using necessary MS sheets of minimum 16 BWG, Two point Zero One
angles of minimum size 40 mm x 40 mm x 5 mm, flat bars Zero Zero Nine
One

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 10/80
3/11/24, 2:55 PM View Form
etc.) and removal of form for:
a) Individual & combined footing''

Twenty
PART-C-i : GATE One Lakh
''Foundation Beam Thousand
94 HOUSE ( CIVIL 16.1.b Cum 5.000 20000.001 100000.005 point Zero
1) Casting'' point Zero
WORKS) Zero Five
Zero One

Nineteen
Four
Thousand
Hundred
Seven
PART-C-i : GATE and
Hundred
95 HOUSE ( CIVIL 16.2.b 2) Form Work/Shuttering (steel) Sqm 40.000 493.001 Ninety- 19720.040
and
WORKS) Three
Twenty
point Zero
point Zero
Zero One
Four

Four Lakh
Twenty
PART-C-i : GATE ''Pedestals, column, RCC Wall etc. Twenty
Thousand
96 HOUSE ( CIVIL 16.1.c 1) Casting Cum 21.000 20000.001 420000.021 Thousand
point Zero
WORKS) i) Ground floor'' point Zero
Zero One
Two One

Seventy
Five
Thousand
Hundred
Four
PART-C-i : GATE and
''2) Form Work/Shuttering (steel) Hundred
97 HOUSE ( CIVIL 16.2.c Sqm 135.000 522.001 Twenty- 70470.135
i) Ground floor'' and
WORKS) Two point
Seventy
Zero Zero
point One
One
Three Five

Sixty
Twenty
PART-C-i : GATE ''Tee beam, L-beam and Rectangular beam Thousand
Thousand
98 HOUSE ( CIVIL 16.1.d 1) Casting Cum 3.000 20000.001 60000.003 point Zero
point Zero
WORKS) i) Ground floor'' Zero
Zero One
Three

Twelve
Five Thousand
Hundred Six
PART-C-i : GATE and Hundred
''2) Form Work/Shuttering (steel)
99 HOUSE ( CIVIL 16.2.d Sqm 22.000 574.001 Seventy- 12628.022 and
i) Ground floor''
WORKS) Four point Twenty-
Zero Zero Eight point
One Zero Two
Two

One Lakh
Twenty
PART-C-i : GATE ''Floor/ Roof Slab Twenty
Thousand
100 HOUSE ( CIVIL 16.1.e 1) Casting Cum 6.000 20000.001 120000.006 Thousand
point Zero
WORKS) i) Ground floor'' point Zero
Zero One
Zero Six

Twenty-
Five
Nine
Hundred
Thousand
PART-C-i : GATE and
''2) Form Work/ Shuttering (steel) Eight
101 HOUSE ( CIVIL 16.2.e Sqm 50.000 597.001 Ninety- 29850.050
i) Ground floor'' Hundred
WORKS) Seven
and Fifty
point Zero
point Zero
Zero One
Five

''Reinforced cement concrete works with minimum cement

content relates to mix ratio 1:2:4 having maximum water
cement ratio = 0.40 and minimum f'cr = 30.5 MPa, satisfying
a specified compressive strength f'c = 22 MPa at 28 days on
standard cylinders as per standard practice of Code
ACI/BNBC/ASTM, cement conforming to BDS EN-197-1-
CEM-I, 52.5N (52.5 MPa) / ASTM-C 150 Type ? I, best
quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and
20 mm down well graded stone chips conforming to ASTM C-
33 (Aggregate grading as per table shown in technical
specification), conducting necessary tests, making and
Twenty Twenty
PART-C-i : GATE placing shutter in position maintaining true to plumb, making
Thousand Thousand
102 HOUSE ( CIVIL 17.1.a shutter water-tight properly, placing reinforcement in position; Cum 1.000 20000.001 20000.001
point Zero point Zero
WORKS) mixing in standard mixer machine with hopper fed by
Zero One Zero One
standard measuring boxes, casting in forms, compacting by
vibrator machine and curing at least for 28 days, removing
centering-shuttering after specified time approved; including
cost of water, electricity,other charges etc. all complete,
approved and accepted by the Engineer-in-charge. (Rate is
excluding laboratory test fees, the cost of reinforcement and
its fabrication, placing, binding etc. and the cost of shuttering
& centering)
a) Tie beam and lintels
1) Casting
i) Ground floor''

''2) Form Work/Shuttering (steel)

Six
Centering and shuttering, including strutting, propping etc.
Five Thousand
(The formwork must be rigid enough both in and out of plane,
Hundred Five
PART-C-i : GATE to make the concrete surface true to the designed shape and
and Forty- Hundred
103 HOUSE ( CIVIL 17.2.a size by using necessary MS sheets of minimum 16 BWG, Sqm 12.000 543.001 6516.012
Three and
WORKS) angles of minimum size 40 mm x 40 mm x 5 mm, flat bars
point Zero Sixteen
etc.) and removal of form for:
Zero One point Zero
Tie beam and lintels
One Two
i) Ground floor''

Twenty Eighty
PART-C-i : GATE ''Cornice, false slab, railing, drop wall, parapet etc.
Thousand Thousand
104 HOUSE ( CIVIL 17.1.b 1) Casting Cum 4.000 20000.001 80000.004
point Zero point Zero
WORKS) i) Ground floor''
Zero One Zero Four

105 PART-C-i : GATE 17.2.b ''2) Form Work/Shuttering (steel) Sqm 70.000 541.001 Five 37870.070 Thirty-
HOUSE ( CIVIL Cornice, false slab, railing, drop wall, parapet etc. Hundred Seven
WORKS) i) Ground floor'' and Forty- Thousand
One point Eight

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 11/80
3/11/24, 2:55 PM View Form
Zero Zero Hundred
One and
Seventy
point Zero
Seven

Testing work of concrete cylinder [From BUET (BRTC), Four Four

KUET (CRTS), RUET (DCE), SUST (CRTC) & DUET (DCE)] Thousand Thousand
size 150mm dia and 300mm hight for testing compressive Eight Eight
PART-C-i : GATE strength in the laboratory approved by the Engineer including Hundred Hundred
106 HOUSE ( CIVIL 18 making cylinder using steel mould, curing the cylinder to the Set 1.000 4875.001 and 4875.001 and
WORKS) laboratory payment of the testing fees etc. complete as per Seventy- Seventy-
direction of the Engineer in charge. (Payment should be Five point Five point
made for the cylinders tested whoes strenght attain the Zero Zero Zero Zero
specified strength of the concrete.) One One

''Supplying, fabrication and fixing to detail as per design :

ribbed or deformed bar reinforcement (excluding laboratory
test fees) for Reinforced concrete, produced and marked in
accordance with BDS ISO 6935-2:2016 (or standard
subsequently released from BSTI) including straightening
and cleaning rust, if any, bending and binding in position with
supply of G.I. wires,conducting necessary laboratory tests
etc. (excluding splices or laps) complete in all respect and
One Lakh Seven
accepted by the Engineer-in-charge (Measurement shall be
Twenty- Lakh
PART-C-i : GATE recorded only on standard mass per unit length of bars, while
Two Thirty-Two
107 HOUSE ( CIVIL 19 dia of bars exceeds its standard) Ton 6.000 122000.001 732000.006
Thousand Thousand
WORKS) Grade 400 (B400DWR / B420DWR: complying BDS ISO
point Zero point Zero
6935-2:2016 / ASTM A615) ribbed or deformed bar produced
Zero One Zero Six
and marked according to Bangladesh standard, with
minimum yield strength, fy (ReH)= 400 MPa but fy not
exceeding 480 MPa and whatever is the actual yield strength
within allowable limit as per BNBC/ ACI 318, the ratio of
ultimate tensile strength fu to yield strength fy, shall be at
least 1.25 and minimum elongation after fracture and
minimum total elongation at maximum force is 17% and 8%
respectively: i) Ground floor''

Supply, fabrication, installation and taking out of 1.2 m hight

temprary safety fencing at diffrent floor during construction
Four Twenty-
work around the outer periphery of building or around the
Hundred One
punch in the floor slab for safety of the worker during
PART-C-i : GATE and Thousand
construction, which shall be made of 10mm dia MS Rod @
108 HOUSE ( CIVIL 20 Sqm 50.000 426.001 Twenty- 21300.050 Three
450mm C/C both way welded at each point togather with a
WORKS) Six point Hundred
12mm Dia MS Rod as top rail drilled anchored to the floor
Zero Zero point Zero
and sides as necessary all complete and accepted by the
One Five
Engineer-in-charge( Salvage materials shall be the
contractors property after completion of work.).

Minimum 12 mm thick cement sand (F.M. 1.2) plaster with Seventeen

Three
neat cement finishing to plinth wall with cement (1:4) up to Thousand
Hundred
150 mm below ground level including washing of sand, One
PART-C-i : GATE and
finishing the edges and corners and curing at least for 7 Hundred
109 HOUSE ( CIVIL 21 Sqm 45.000 381.001 Eighty- 17145.045
days, cost of water, electricity, scaffolding and other charges and Forty-
WORKS) One point
etc. all complete in all respect as per drawing and accepted Five point
Zero Zero
by the Engineer-in-charge. (Cement: CEM-II/B-M) a) Ground Zero Four
One
Floor Five

Sixty-
Seven
Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:4)
Three Thousand
with fresh cement to both inner-and outer surface of wall,
Hundred Seven
PART-C-i : GATE finishing the corner and edges including washing of sand,
and Hundred
110 HOUSE ( CIVIL 22 cleaning the surface, curing at least for 7 days, cost of water, Sqm 215.000 315.001 67725.215
Fifteen and
WORKS) electricity, scaffolding and other charges etc. all complete in
point Zero Twenty-
all respect as per drawing and accepted by the Engineer-in-
Zero One Five point
charge. (Cement: CEM-II/B-M) i) Ground floor
Two One
Five

Minimum 6 mm thick cement sand (F.M. 1.2) plaster (1:4)

with fresh cement to ceiling, R.C.C. columns, beams, surface
Ninety
of stair case, sunshades, cornices, railings, drop wall, Three
Thousand
PART-C-i : GATE louvers, fins and finishing the corners and edges including Hundred
Three
111 HOUSE ( CIVIL 23 washing of sand, cleaning the surface, curing at least for 7 Sqm 300.000 301.001 and One 90300.300
Hundred
WORKS) days, cost of water, electricity, scaffolding and other charges point Zero
point
etc. all complete in all respect as per drawing and accepted Zero One
Three
by the Engineer-in-charge. (Cement: CEM-II/B-M) i) Ground
floor

Reetha wash of approved quality by reeta fruit; ceramic

bricks and fair-faced surface preparation including cleaning,
Eighty-
drying, making free from dirt, grease, wax, removing all
Eight
chalked and scaled materials, fungus, mending good the Four
Thousand
PART-C-i : GATE surface defects using sand paper and necessary scaffolding; Hundred
Four
112 HOUSE ( CIVIL 24 applying 2 coats of reeta wash on exposed brick surface/fair Sqm 220.000 402.001 and Two 88440.220
Hundred
WORKS) face surface spreading by brush, 120 water paper, plastic point Zero
and Forty
brush, marking cloths & necessary required materials etc. up Zero One
point Two
to desired finishing, elapsing specified time for drying or
Two
recoating; all complete in all floors and accepted by the
Engineer-in-charge.

Silicon based water repellent of approved quality delivered

from authorized local agent of the manufacturer in a sealed One
container; surface preparation including cleaning, drying, Thousand
Two
making free from dirt, grease, wax, removing all chalked and Two
Hundred
PART-C-i : GATE scaled materials, fungus, mending good the surface defects Hundred
and Fifty-
113 HOUSE ( CIVIL 25 using sand paper and necessary scaffolding; applying 3 Sqm 5.000 257.001 1285.005 and
Seven
WORKS) coats of silicon based water repellent on exposed brick Eighty-
point Zero
surface/ fair face surface spreading by brush/roller/spray & Five point
Zero One
necessary scaffolding etc. upto desired finishing, elapsing Zero Zero
specified time for drying or recoating; all complete in all floors Five
and accepted by the Engineer-in-charge.

114 PART-C-i : GATE 26 Rule pointing to brick wall with cement sand (F.M. 1.2) mortar Sqm 220.000 239.001 Two 52580.220 Fifty-Two
HOUSE ( CIVIL (1:2) with fresh cement and raking out the joints, curing at Hundred Thousand
WORKS) least for 7 days, cost of water, electricity, scaffolding and and Thirty- Five
other charges etc. all complete in all respect as per drawing Nine point Hundred
and Eighty

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 12/80
3/11/24, 2:55 PM View Form
and accepted by the Engineer-in-charge. (Cement: CEM-II/B- Zero Zero point Two
M) One Two

''Supplying, fitting and fixing country made GP(Gress

Porcellanto) - glazed or unglazed homogeneous floor tiles Forty
One
complying BDS ISO 13006: 2015, water absorption ≤ 0.5%, Thousand
Thousand
modulus of rupture (MOR) ≥ 27 N/mm2, irrespective of color Two
Six
PART-C-i : GATE &/or design, with 20 mm thick cement sand (F.M. 1.2) mortar Hundred
Hundred
115 HOUSE ( CIVIL 27.a (1:4) base and raking out the joints with white cement Sqm 25.000 1611.001 40275.025 and
and
WORKS) including cutting and laying the tiles in proper way and Seventy-
Eleven
finishing with care etc. all complete and accepted by the Five point
point Zero
Engineer-in-charge. (Cement: CEM-II/B-M) Zero Two
Zero One
a) GP (homogeneous) 300 mm x 600 mm floor tiles Five
i) Ground floor''

One
Eight
Thousand
Thousand
Three
PART-C-i : GATE AND
''GP (homogeneous) 300 mm x 300 mm floor tiles Hundred
116 HOUSE ( CIVIL 27.b Sqm 6.000 1347.001 8082.006 Eighty-
i) Ground floor'' and Forty-
WORKS) Two point
Seven
Zero Zero
point Zero
Six
Zero One

''Supplying, fitting and fixing country made glazed wall tiles

complying BDS ISO 13006: 2015, irrespective of color &/or Forty-Six
One
design, with 20 mm thick cement sand (F.M. 1.2) mortar (1:3) Thousand
Thousand
base and raking out the joints with white cement including Seven
Eight
PART-C-i : GATE cutting, laying and hire charge of machine and finishing with Hundred
Hundred
117 HOUSE ( CIVIL 28 care etc. including cost of water, electricity and other charges Sqm 25.000 1869.001 46725.025 and
and Sixty-
WORKS) complete in all respect and accepted by the Engineer-in- Twenty-
Nine point
charge. (Cement: CEM-II/B-M) Five point
Zero Zero
Wall tiles more than 250 mm x 400 mm & less than or equal Zero Two
One
to 300 mm x 600 mm in sizes, Five
i) Ground floor''

Thirty-One
Three
''Labour cost for making moulding in marble stone/ Tiles as Thousand
Hundred
per architectural drawing including cutting, grinding, finishing, Nine
PART-C-i : GATE and
supplying necessary equipment etc. complete in all respect Hundred
118 HOUSE ( CIVIL 29 Rm 80.000 399.001 Ninety- 31920.080
and accepted by the Engineer in Charge. (Cement: CEM- and
WORKS) Nine point
II/B-M). Twenty
Zero Zero
a) 12 mm thick marble/ Tiles stone'' point Zero
One
Eight

''Supplying and making door and window frames (Chowkat)

Two Lakh
for all floors in/c wall side grove cutting, moulding by CNC
Fifty-Six Fifty-One
machine or any other means with matured seasoned wood of
Thousand Thousand
PART-C-i : GATE required size including painting two coats of coal tar to the
Eight Three
119 HOUSE ( CIVIL 30 surface in contact with wall, fitting and fixing in position etc. Cum 0.200 256840.001 51368.000
Hundred Hundred
WORKS) all complete and accepted by the Engineer-in-charge. (All
and Forty and Sixty-
sizes of wood are finished).
point Zero Eight
Frame made from seasoned Chattogram Teak
Zero One
Upto Size 0'-2.5'''' x 0'-6'''' (finished) ''

One
One Thousand
Supplying, fitting and fixing M.S. flat bar clamp of 150 mm x
Hundred Nine
PART-C-i : GATE 38 mm x 6 mm size having bifurcated ends to door and
and Thirty- Hundred
120 HOUSE ( CIVIL 31 window frames with necessary rowel plug, screws etc. each 15.000 131.001 1965.015
One point and Sixty-
WORKS) including cutting grooves in chowkat if necessary etc. all
Zero Zero Five point
complete and accepted by the Engineer-in-charge.
One Zero One
Five

''Supplying, fitting and fixing of 38 mm thick well matured

seasoned (moisture content should be between 12% to 16%)
Thirteen Fifty-
solid wood single leaf door shutter having stile section 100m
Thousand Three
x 38mm, top rail section 125mm x 38mm, lock rail section
Four Thousand
100mm x 38mm and bottom rail section 225mm x 38mm
PART-C-i : GATE Hundred Nine
(made from minimum 250mm wide plank) with 4nos 100mm
121 HOUSE ( CIVIL 32 Sqm 4.000 13499.001 and 53996.004 Hundred
long, 3mm thick hinge, 12mm dia 250mm long tower bolt,
WORKS) Ninety- and
12mm dia 200mm long socket bolt, 2nos 150mm long
Nine point Ninety-Six
handle, hinged cleats and buffer blocks. All complete in all
Zero Zero point Zero
floors and accepted by the Engineer-in-charge. (All sizes of
One Zero Four
wood are finished)
Chattogram Teak (SS Fittings)''

''Supplying, fitting and fixing of aluminium sliding window as

per the U.S. Architectural Aluminium Manufacturer's
Association (AAMA) standard specification and BDS
1879:2014 having minimum 1.2 mm thick outer bottom (size
75.50 mm, 32mm,0.605 kg/m ), minimum 1.2 mm thick outer
top (size 75.50 mm, 28.50 mm0.705 kg/m), minimum 1.2 mm
thick shutter top (size 33 mm.26.80 mm,0.42 kg/m), minimum
1.2 mm thick shutter bottom (size 60mm, 24.40 mm,0.589
kg/m), minimum 1.2 mm thick outer side (size 75.50 Twenty-
Four
mm,19.90 mm,0.52 kg/m), minimum 1.2 mm thick shutter Seven
Thousand
lock (size 49.20 mm 25.80 mm,0.543 kg/m) and minimum 1.2 Thousand
Five
mm thick inter lock (size 34.40 mm, 32.13 mm,0.562 kg/m) Four
PART-C-i : GATE Hundred
sections all aluminium members will be anodized to Hundred
122 HOUSE ( CIVIL 33 Sqm 6.000 4583.001 and 27498.006
aluminium bronze/silver/ss/black colour with a coat not less and
WORKS) Eighty-
than 15 micrones in thickness or powder coated to any Ninety-
Three
colour with a coat not less than 25 micrones in thickness and Eight point
point Zero
density of 4 mg per square cm etc. including all accessories Zero Zero
Zero One
like sliding door key lock, sliding door wheel, sliding door Six
mohiar, sliding door neoprene, bolts and nuts including
sealants, keeping provision for fitting 5 mm thick glass
including labour charge for fitting of accessories, making
grooves and mending good damages, carriage, and
electricity complete in all respect as per drawing and
accepted by the Engineer-in-charge.
Size up to : 1500mm X 1400mm
Powder coated to any colour''

123 PART-C-i : GATE 34 ''Supplying, fitting and fixing in Aluminium door frames, Sqm 6.000 2879.001 Two 17274.006 Seventeen
HOUSE ( CIVIL windows, partitions and curtain wall distortion free glass of Thousand Thousand
WORKS) approved quality and shade including cost of fitting fixing all Eight Two
necessary accessories etc. complete in all respect as per Hundred Hundred

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 13/80
3/11/24, 2:55 PM View Form
drawing and accepted by the Engineer-in-charge. and and
6 mm thick clear tempered glass'' Seventy- Seventy-
Nine point Four point
Zero Zero Zero Zero
One Six

Supplying, fitting and fixing window grill made of 12 mm x 12

mm M.S. solid bar @ 100mm c/c with outer frame of 38 mm Two
x 6mm F.I. bar and 25 mm x 6 mm F.I. bar for clamp as per Thousand Sixteen
design including fabrication, welding, cost of electricity Eight Thousand
PART-C-i : GATE workshop charges, labour charges for fitting and fixing grills Hundred Nine
124 HOUSE ( CIVIL 35 in position, local carriage charges, cutting grooves, mending Sqm 6.000 2825.001 and 16950.006 Hundred
WORKS) good the damages, tools and plants, finished with anti- Twenty- and Fifty
corrosive painting (Red-Oxide) etc. complete for all floors Five point point Zero
approved and accepted by the Engineer-in-charge. (Total Zero Zero Zero Six
weight per sqm should be approx 19 kg and add or deduct @ One
Tk. 100.00 for each kg/sqm excess or less respectively)

Approved best quality and colour synthetic polyvinyl

distemper delivered from authorized local agent of the
manufacturer in a sealed container, applying to wall and
ceiling with surface preparation including cleaning drying,
Fifty-
making free from dirt, grease, wax, removing all chalked and
Two Three
scaled materials, fungus, mending good the surface defects
Hundred Thousand
PART-C-i : GATE using sand paper and necessary scaffolding; applying 1 coat
and Two
125 HOUSE ( CIVIL 36 of interior sealer of specified brand on prepared surface; then Sqm 250.000 213.001 53250.250
Thirteen Hundred
WORKS) applying 1 coat of interior putty of specified brand for
point Zero and Fifty
levelling, spot filling, crack filling and cutting by sand
Zero One point Two
paper/zero water paper; finally applying 2 coats of synthetic
Five
polyvinyl distemper spreading by brush/roller/spray &
necessary scaffolding etc. upto desired finishing, elapsing
specified time for drying or recoating; all complete in all floors
and accepted by the Engineer-in-charge.

Standard synthetic enamel paint of approved best quality and

colour delivered from authorized local agent of the
Two
manufacturer in a sealed container, having high water Sixteen
Hundred
resistance, high bondibility, flexibility property; using specified Thousand
PART-C-i : GATE and
brand thinner applying to metallic or wooden surface by AND
126 HOUSE ( CIVIL 37 Sqm 70.000 229.001 Twenty- 16030.070
brass/roller/spray in 2 coats over single coat anti-corrosive Thirty
WORKS) Nine point
coating including cleaning, drying, making free from dirt, point Zero
Zero Zero
grease, wax, removing all chalked and scaled materials, all Seven
One
complete in all floors and accepted by the Engineer-in-
charge.

Seven
Five Thousand
Premium French polishing to door and window frames,
Hundred Two
PART-C-i : GATE shutter and any other wooden surface by three coats over a
and Hundred
127 HOUSE ( CIVIL 38 coat of priming including putty, cleaning, finishing and Sqm 14.000 519.001 7266.014
Nineteen and Sixty-
WORKS) polishing with sand paper etc. all complete in all floors and
point Zero Six point
accepted by the Engineer-in-charge.
Zero One Zero One
Four

Standard Duco paint with approved best quality and colour Ten
delivered from authorized local agent of the manufacturer in Two Thousand
a sealed container, having high water resistance, high Thousand Four
PART-C-i : GATE bondibility, flexibility property; using specified brand thinner AND Hundred
128 HOUSE ( CIVIL 39 applying to metallic or wooden surface by brass/roller/spray Sqm 5.000 2099.001 Ninety- 10495.005 and
WORKS) machine in 2 coats over single coat primer coating including Nine point Ninety-
cleaning, drying, making free from dirt, grease, wax, Zero Zero Five point
removing all chalked and scaled materials, all complete in all One Zero Zero
floors and accepted by the Engineer-in-charge. Five

Lacquer Polish (China or equivalent) of Standard design of Two Ten

wooden surface Top coat, Thinner, Clear sealer, Color Thousand Thousand
pigment etc. complete from authorized local agent of the One Seven
PART-C-i : GATE
manufacturer in a sealed container, including paint spray Hundred Hundred
129 HOUSE ( CIVIL 40 Sqm 5.000 2143.001 10715.005
machine etc.including surface cleaning from dust, oil or dirt, and Forty- and
WORKS)
smoothening, finishing and polishing with sand paper and Three Fifteen
necessary tools, scaffolding, es etc. all complete in all floors point Zero point Zero
approved and accepted by the Engineer. Zero One Zero Five

Two
One Thousand
Thousand One
PART-C-i : GATE Supplying, fitting and fixing rim/ round door lock of approved
AND Fifty- Hundred
130 HOUSE ( CIVIL 41 quality including all necessary tools and accessories etc. all Each 2.000 1058.001 2116.002
Eight point and
WORKS) complete and accepted by the Engineer-in-charge.
Zero Zero Sixteen
One point Zero
Zero Two

Six
Three
Hundred
Supplying, fitting and fixing best quality heavy type 19 mm Hundred
PART-C-i : GATE and
dia and 300 mm long hasp bolt including cutting grooves in and Forty-
131 HOUSE ( CIVIL 42 Each 2.000 344.001 688.002 Eighty-
door shutter and frames, screws etc. all complete approved Four point
WORKS) Eight point
and accepted by the Engineer-in-charge. SS Hasp Bolt Zero Zero
Zero Zero
One
Two

Three Three
Hundred Hundred
Supplying, fitting and fixing of best quality magnetic door
PART-C-i : GATE and and
holder of approved quality including all necessary tools and
132 HOUSE ( CIVIL 43 Each 1.000 374.001 Seventy- 374.001 Seventy-
accessories all complete and accepted by the Engineer-in-
WORKS) Four point Four point
charge.
Zero Zero Zero Zero
One One

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 14/80
3/11/24, 2:55 PM View Form
''Manufacturing, supplying, fitting and fixing double leaf SS
Main gate made with 2mm thick 75mm x 75mm ss hollow
box as outer frame, 1.5 mm thick 50mm X 25mm ss hollow
Six Lakh
box as inner frame with 1.5 mm thick, 19 mm x 19 mm SS Twenty-
Fifty-
hollow box for fencing @75mm c/c, 900 mm Long 25mm dia Nine
Three
SS box handle, 350 mm long 20mm dia SS hatch bolt, Thousand
Thousand
150mm x 38mm hinge base plate, 50 mm x 8 mm S.S plate Seven
PART-C-i : GATE Nine
for bottom rail, 75 mm dia SS wheel, 6 mm thick 12'' x 13'' Hundred
133 HOUSE ( CIVIL 44 Sqm 22.000 29724.001 653928.022 Hundred
box SS 16 gauge plate for locking arangement, 100 mm x 10 and
WORKS) and
mm dia S.S. Rowel bolt, SS pad lock, fitting-fixing the gate by Twenty-
Twenty-
cutting hole and mending good the damages by pouring Four point
Eight point
concrete(1:2:4) into the holes and hoisting the gate in Zero Zero
Zero Two
position with necessary carriage,electrodes, curing, One
Two
polishing, finishing, etc.complete as per drawing and design
and accepted by the Engineer-in-charge.
For S.S. Grade A304''

Manufacturing, supplying, fitting, fixing of ordinary type M.S.

folding gate with 12mm x 12mm MS square solid bar and 25
mm x 25mm x 6 mm MS angle box frame and two nos outer
side fixed box post made with 40 mm x 40 mm x 6 mm angle
at both ends attached to column/wall side including locking Five Eleven
arrangement providing 38 mm x 38 mm x 6 mm M.S. angle Thousand Thousand
PART-C-i : GATE clamps fitted and fixed with the outer frame of the main gate, Six Two
134 HOUSE ( CIVIL 45 the clamp being embedded in R.C.C. or R.C.C. core pillar Sqm 2.000 5640.001 Hundred 11280.002 Hundred
WORKS) with cement concrete (1:2:4) in masonry including cutting and Forty and Eighty
holes and mending good the damages, finishing, curing etc. point Zero point Zero
including riveting, welding as and where necessary, painting Zero One Zero Two
two coats with approved quality of synthetic enamel paint
over a coat of priming of anti-corrosive paint etc. all complete
as per drawing, design and accepted by the Engineer-in-
charge. (Rate is excluding the cost of paint)

Reinforced Cement Concrete Pad (RC Pad) (f'c = 19 MPa,

minimum f'cr = 24 MPa in nominal mix 1 : 2 : 4) with 1/2'' Ten
Forty-One
Down Graded Picked Jhama Brick Chips, 50% of Medium Thousand
Thousand
Sand of FM 1.2 + 50% of Coarse Sand of FM 2.2 and Four
PART-C-i : GATE Seven
Ordinary Portland Cement ( OPC : CEM-I ) placing Hundred
135 HOUSE ( CIVIL 46 Cum 4.000 10435.001 41740.004 Hundred
reinforcement in position; mixing with standard mixer and Thirty-
WORKS) and Forty
machine with hopper, including cost of water, electricity and Five point
point Zero
other charges etc. all complete approved and accepted by Zero Zero
Zero Four
the Engineer. (Rate is excluded of the cost of One
Reinforcement). i) Ground floor roof

Three
Supplying, fitting, fixing, and installation of ornamental type Four
Lakh
M.S. mother board diagram shape of approve design and Thousand
Seventeen
shape with 50 mm x 25 mm M.S. box of 3 mm thickness and Eight
Thousand
PART-C-i : GATE 150 mm x 100 mm ring of 3 mm thickness are placed as per Hundred
Six
136 HOUSE ( CIVIL 47 drawing and design. including fabrication, riveting, welding as Sqm 65.000 4887.001 and 317655.065
Hundred
WORKS) and where necessary, painting 2 (two) coats with approved Eighty-
and Fifty-
best quality paint over a coat of anticorrosive painting etc. all Seven
Five point
complete as per drawing, design and accepted by the point Zero
Zero Six
Engineer-in-charge. (Rate is including the cost of paint). Zero One
Five

Supplying anti-termite chemicals named DURS BAN 20 EC / Twenty-

equivalent and mixing the same with pure water in required Three
proportion (For DURSBAN 20 EC I Liter in 19 liters of pure Thousand
Five
water) and spraying the emulsified mixture with hand sprayer One
PART-C-i : GATE Hundred
over both outside and inside back fill in foundation trenches Hundred
137 HOUSE ( CIVIL 48 Sqm 46.000 504.001 and Four 23184.046
@ 7.50 liters per sqm of the vertical surface area of the and
WORKS) point Zero
foundation wall accepted by the Engineer-in-charge. (The Eighty-
Zero One
maximum depth of the back fill to be treated is 500 mm. and Four point
the measurement for depth should not be given more than Zero Four
500 mm) Six

Trench treatment for protection against incoming termites to

the establishment through underground by making trench
Thirteen
around existing building /structures at a required depth of Three
Thousand
750 mm from existing level including supplying anti-termite Hundred
PART-C-i : GATE Seven
chemicals named DURS BAN 20 EC / equivalent preparing and Forty-
138 HOUSE ( CIVIL 49 Rm 40.000 344.001 13760.040 Hundred
the solution to be mixed with water in the ratio of chemical: Four point
WORKS) and Sixty
water = 1:19, applying the solution into trench with the help Zero Zero
point Zero
of a chemical sprayer in three layers and each layer follows a One
Four
250 mm thick back-fill in trench etc all complete and
accepted by the Engineer-in-charge.

Anti termite treatment of all wooden doorframes, window One Seven

frames, wood paneling etc. by using DURS BAN 20 EC / Hundred Hundred
PART-C-i : GATE equivalent emulsion in the ratio of 1 liter. DURS BAN 20 EC and and
139 HOUSE ( CIVIL 50 + 19 liters of Kerosene oil suitable for wood, plywood, Sqm 4.000 194.001 Ninety- 776.004 Seventy-
WORKS) particle board, hard board etc. on both surfaces by brush on Four point Six point
both surfaces by brush-on-method etc. complete and Zero Zero Zero Zero
accepted by the Engineer-in-charge. One Four

Anti-termite treatment of electric telephone wiring system by

Three One
inserting a plugging materials (cotton, foam etc.) soaked in
Hundred Thousand
anti-termite chemical DURS BAN 20 EC / equivalent to an
PART-C-i : GATE and Six
electric switch board point for all floors and spraying the
140 HOUSE ( CIVIL 51 Per Board 5.000 326.001 Twenty- 1630.005 Hundred
emulsion (to be mixed at the ratio of 1 liters DURS BAN 20
WORKS) Six point and Thirty
EC + 19 liter of water) to the casings and grooving of electric
Zero Zero point Zero
wirings, telephone cables utility pipes etc. for all floors etc.
One Zero Five
complete and accepted by the Engineer-in-charge.

Five Lakh
Supply, fabrication and installation of built-up sections i.e.
One Thirty-
columns, beams, rafters, bracings, struts etc. (up to level-4)
Hundred Four
PART-C-i : GATE from steel plates conforming to ASTM A572, with a minimum
and Thirty- Thousand
141 HOUSE ( CIVIL 52 yield strength of 345 MPa, including the cost of testing of Kg 3900.000 137.001 534303.900
Seven Three
WORKS) plates, applicaton of red/ grey-oxide primer etc. all complete
point Zero Hundred
as per drawing, specification and direction of Engineer-in-
Zero One and Three
charge.
point Nine

142 PART-C-i : GATE 53 Supply and fixing of connection bolts of variable diameter Kg 40.000 361.001 Three 14440.040 Fourteen
HOUSE ( CIVIL with nut and washer according to ''ASTM A325 Type 1 or Hundred Thousand
WORKS) equivalent? with Fu =720 Mpa, including the cost of testing of and Sixty- Four
One point Hundred

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 15/80
3/11/24, 2:55 PM View Form
bolts, all complete as per drawing, specification and direction Zero Zero and Forty
of Engineer-In-Charge. One point Zero
Four

Premium Synthetic Enamel paint of approved best quality

and colour delivered from authorized local agent of the
manufacturer(Berger robbialac supergloss synthetic enamel/
Fifty-Nine
Elite lucky seven/ Asian apcolipe premium paint or equivalent
Thousand
brand) in a sealed container, having highly water resistant,
PART-C-i : GATE Fifteen One
high bondibilty, flexiblity property; using specified brand
143 HOUSE ( CIVIL 54 Kg 3940.000 15.001 point Zero 59103.940 Hundred
thinner applying to metallic surface by spray in two coats
WORKS) Zero One and Three
over single coat anti-corrosive coating including cleaning
point Nine
drying, making free from dirt, grease, wax, removing all
Four
chalked and scaled materials, all complete in all floors
accepted by the Engineer-in-charge. (payment shall be made
on strucutral steel weight basis)

PART-C-i : GATE Five Lakh Five Lakh

Special Painting work in main gate. all complete as per
144 HOUSE ( CIVIL 55 Job 1.000 500000.001 point Zero 500000.001 point Zero
drawing, direction of Architect and Engineer-In-Charge.
WORKS) Zero One Zero One

''Supplying, fitting and fixing of Bangladesh pattern, long pan

with foot-rest.

The sanitary ware shall conform BDS1162:2014. The glaze

shall be thoroughly fused to body. The minimum thickness of
body at any section shall be 5 mm. When assembled
together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes
or defects in excess of those listed in BDS standard. The
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the
Two Two
glaze. There shall be no crazing and no stain on the ware.
Thousand Thousand
The materials used for making glaze shall not contain lead
PART-C-ii : GATE Seven Seven
compound. In case of certain coloring oxides used for
HOUSE Hundred Hundred
145 1 making colored glaze, the lead content, if any, shall not Each 1.000 2736.001 2736.001
(SANITARY and Thirty- and Thirty-
exceed 5 percent of the weight of the glaze materials.
WORKS) Six point Six point
Appliances shall be clearly and indelibly marked at a
Zero Zero Zero Zero
prominent place, visible even after the appliances are
One One
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure should be placed in position preparing the base of

pan with cement mortar (1:4) and with wire mesh or rods, if
necessary in all floors including making holes wherever
required and mending good the damages and fitting, fixing,
finishing etc. complete with all necessary fittings and
connections approved and accepted by the Engineer- in-
charge.

Approx. 540 X 460 X 290 mm size, minimum 13.5 kg of

weight''

''Supplying, fitting and fixing of European type glazed

porcelain low-down.

The sanitary ware shall conform BDS1162:2014. The glaze

shall be thoroughly fused to body. The minimum thickness of
body at any section shall be 5 mm. When assembled
together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes
or defects in excess of those listed in BDS standard. The
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the
glaze. There shall be no crazing and no stain on the ware. Four Four
PART-C-ii : GATE The materials used for making glaze shall not contain lead Thousand Thousand
HOUSE compound. In case of certain coloring oxides used for AND AND
146 2 Each 1.000 4017.001 4017.001
(SANITARY making colored glaze, the lead content, if any, shall not Seventeen Seventeen
WORKS) exceed 5 percent of the weight of the glaze materials. point Zero point Zero
Appliances shall be clearly and indelibly marked at a Zero One Zero One
prominent place, visible even after the appliances are
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure shoild be placed on walls or directly over water

closet by necessary accessories, rowel plugs, making holes
wherever required and mending good the damages and
fitting, fixing & finishing etc. complete with all necessary
fittings and connections approved and accepted by the
Engineer- in- charge.

Approx. 490 X 190 X 345 mm size, minimum 11.00 kg of

weight''

147 PART-C-ii : GATE 3 ''Supplying of country made glazed vitreous W/H wash basin Each 1.000 8443.001 Eight 8443.001 Eight
HOUSE of any color including pedestal. Thousand Thousand
(SANITARY Four Four
WORKS) The sanitary ware shall conform BDS1162:2014. The glaze Hundred Hundred
shall be thoroughly fused to body. The minimum thickness of and Forty- and Forty-
body at any section shall be 5 mm. When assembled Three Three
together and when examined from a distance of 60 cm, the point Zero point Zero
outer surface shall not show to the unaided eye, blemishes Zero One Zero One
or defects in excess of those listed in BDS standard. The
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 16/80
3/11/24, 2:55 PM View Form
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the
glaze. There shall be no crazing and no stain on the ware.
The materials used for making glaze shall not contain lead
compound. In case of certain coloring oxides used for
making colored glaze, the lead content, if any, shall not
exceed 5 percent of the weight of the glaze materials.
Appliances shall be clearly and indelibly marked at a
prominent place, visible even after the appliances are
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure should be placed in position with heavy type C.I.

Brackets. 30 mm dia PVC waste water pipe with brass
coupling (not exceeding 750 mm in length), basin waste with
chain plug including making holes in walls and floors and
fitting with wall, screws and mending good the damages,
finishing etc. all complete approved and accepted by the
Engineer-in-charge.

Approx. 525 x 415 mm, minimum weight 27.4 kg''

Two Two
''Supplying, fitting and fixing of 5 mm thick unframed super
Thousand Thousand
PART-C-ii : GATE quality double coated mirror with all necessary fitting
Five Five
HOUSE including making holes in walls and mending good the
148 4 Each 1.000 2590.001 Hundred 2590.001 Hundred
(SANITARY damages with cement mortar (1:4) etc. all complete
and Ninety and Ninety
WORKS) approved and accepted by the Engineer-in-charge.
point Zero point Zero
Local Mirror, 5 mm thickness''
Zero One Zero One

One One
Supplying, fitting and fixing of super quality 600 mm x 125
Thousand Thousand
PART-C-ii : GATE mm coloured glass (plate) shelf having 5 mm thickness with
Eight Eight
HOUSE fancy C.P. brackets, screws and frames including making
149 5 Each 1.000 1830.001 Hundred 1830.001 Hundred
(SANITARY holes in walls and mending good the damages with cement
and Thirty and Thirty
WORKS) mortar (1:4) etc. all complete approved and accepted by the
point Zero point Zero
Engineer- in- charge.
Zero One Zero One

''Supplying, fitting and fixing of country made best quality Seven Seven
PART-C-ii : GATE towel rail/ ring/ shelf minimum 20 mm in dia with C.P. holder Hundred Hundred
HOUSE including making holes in walls and mending good the and and
150 6 Each 1.000 718.001 718.001
(SANITARY damages with cement mortar (1:4) etc. all complete Eighteen Eighteen
WORKS) approved and accepted by the Engineer- in- charge. point Zero point Zero
600 mm long C.P. single towel rail'' Zero One Zero One

Five Five
''Supplying, fitting and fixing of best quality toilet paper holder
PART-C-ii : GATE Hundred Hundred
of standard size including making holes in walls and mending
HOUSE and Sixty- and Sixty-
151 7 good the damages with cement mortar (1:4) etc. all complete Each 1.000 563.001 563.001
(SANITARY Three Three
approved and accepted by the Engineer- in- charge.
WORKS) point Zero point Zero
Stainless steel toilet paper holder''
Zero One Zero One

One
Six
Thousand
''Supplying, fitting and fixing of standard size country made Hundred
PART-C-ii : GATE Two
soap tray including making holes in walls and mending good and
HOUSE Hundred
152 8 the damages with cement mortar (1:4) etc. all complete Each 2.000 628.001 Twenty- 1256.002
(SANITARY and Fifty-
approved and accepted by the Engineer- in- charge. Eight point
WORKS) Six point
Stainless steel soap tray '' Zero Zero
Zero Zero
One
Two

Three
''Supplying, fitting and fixing of floor grating net in traps or in Six
Hundred
PART-C-ii : GATE drains including making holes in walls/floors and mending Hundred
and
HOUSE good the damages with cement mortar (1:4) etc. all complete and Fifty-
153 9.a Each 2.000 328.001 Twenty- 656.002
(SANITARY approved and accepted by the Engineer- in- charge. of Six point
Eight point
WORKS) following type Zero Zero
Zero Zero
a) Approx. 100~125 mm dia stainless steel floor grating net'' Two
One

One
Five
Thousand
PART-C-ii : GATE Hundred
One
HOUSE b) 125 mm dia convex cast iron grating on rain water down and Fifty-
154 9.b Each 2.000 555.001 1110.002 Hundred
(SANITARY pipe (roof top) Five point
and Ten
WORKS) Zero Zero
point Zero
One
Zero Two

Fifteen
Supplying, fitting and fixing of 100 mm inside diameter & wall Nine Thousand
thickness 2.7 mm - 3.4 mm best quality uPVC rain water Hundred Eight
PART-C-ii : GATE
down pipe fitting, fixed in position with head and shoes, and Hundred
HOUSE
155 10 bends, min.20 mm width F.I. Bar clamp and nails, and Rm 16.000 993.001 Ninety- 15888.016 and
(SANITARY
including all accessories such as round grating/domed roof Three Eighty-
WORKS)
grating, bands, sockets approved and accepted by the point Zero Eight point
Engineer- in- charge. Zero One Zero One
Six

''Supplying different inside dia best quality uPVC soil, waste

and ventilation pipe having specific gravity 1.35 - 1.45, wall Seven
thickness 2.5 mm - 3.0 mm, and other physical, chemical, Five Thousand
PART-C-ii : GATE themal, fire resistivity properties etc. as per BSTI approved Hundred Three
HOUSE manufacturer standards or ASTM, BS/ISO/IS standards and Sixty- Hundred
156 11.a Rm 13.000 564.001 7332.013
(SANITARY fitting and fixing in position with sockets, bends, of uPVC Four point and Thirty-
WORKS) Pipe with all accessories such as Round grating /domed roof Zero Zero Two point
grating bands, sockets etc. approved and accepted by the One Zero One
Engineer- in- charge. Three
a) 50 mm inside dia wall thickness 2.5 mm - 3.0 mm''

157 PART-C-ii : GATE 11.b b) 100 mm inside dia wall thickness 3.4 mm - 4.0 mm Rm 40.000 881.001 Eight 35240.040 Thirty-Five
HOUSE Hundred Thousand
(SANITARY and Two
WORKS) Eighty- Hundred
One point and Forty

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 17/80
3/11/24, 2:55 PM View Form
Zero Zero point Zero
One Four

''Supplying different inside dia best quality CPVC pressure

Four
pipe for water supply having specific gravity 1.35 - 1.45, and
Two Thousand
other physical, chemical, thermal, fire resistivity properties
PART-C-ii : GATE Hundred Two
etc. as per BSTI approved manufacturer standards or ASTM,
HOUSE and Sixty- Hundred
158 12.i BS/ISO/IS standards fitting and fixing in position with Rm 16.000 266.001 4256.016
(SANITARY Six point and Fifty-
sockets, bends, with all accessories such as round
WORKS) Zero Zero Six point
grating/domed roof grating, bends, sockets etc. approved
One Zero One
and accepted by the Engineer-in-charge.
Six
i) 12 mm dia wall thickness 2.8 mm - 3.3 mm''

Three
Three
Hundred
PART-C-ii : GATE Thousand
and
HOUSE AND
159 12.ii ii) 19 mm dia wall thickness 2.9 mm - 3.4 mm Rm 8.000 387.001 Eighty- 3096.008
(SANITARY Ninety-Six
Seven
WORKS) point Zero
point Zero
Zero Eight
Zero One

Four Sixty-Eight
PART-C-ii : GATE Hundred Thousand
HOUSE and Fifty- One
160 12.iii iii) 25 mm dia wall thickness 3.4 mm - 4.0 mm Rm 150.000 454.001 68100.150
(SANITARY Four point Hundred
WORKS) Zero Zero point One
One Five

Six
Hundred
PART-C-ii : GATE Five
and
HOUSE Thousand
161 12.iv iv) 32 mm dia wall thickness 3.6 mm - 4.2 mm Rm 8.000 625.001 Twenty- 5000.008
(SANITARY point Zero
Five point
WORKS) Zero Eight
Zero Zero
One

Four Nine
PART-C-ii : GATE ''Supplying, fitting and fixing of best quality G.I. gate valve Hundred Hundred
HOUSE with sealant etc. complete approved and accepted by the and Fifty- and
162 13.(i) Each 2.000 459.001 918.002
(SANITARY Engineer- in- charge. Nine point Eighteen
WORKS) i) 12 mm brass gate valve'' Zero Zero point Zero
One Zero Two

Six Six
PART-C-ii : GATE Hundred Hundred
HOUSE and Thirty- and Thirty-
163 13.(ii) ii) 20 mm brass gate valve Each 1.000 633.001 633.001
(SANITARY Three Three
WORKS) point Zero point Zero
Zero One Zero One

Two
Thousand
Seven
Nine
PART-C-ii : GATE Hundred
Hundred
HOUSE and Forty-
164 13.(iii) iii) 25 mm brass Gate valve Each 4.000 746.001 2984.004 and
(SANITARY Six point
Eighty-
WORKS) Zero Zero
Four point
One
Zero Zero
Four

One One
Thousand Thousand
Two Two
PART-C-ii : GATE
Hundred Hundred
HOUSE
165 13.(iv) iv) 40 mm brass gate valve Each 1.000 1221.001 and 1221.001 and
(SANITARY
Twenty- Twenty-
WORKS)
One point One point
Zero Zero Zero Zero
One One

One
Three
Hundred
PART-C-ii : GATE ''Supplying, fitting and fixing of G.I. Union with sealant etc. Hundred
and
HOUSE complete in all respects approved and accepted by the and Fifty-
166 14.(i) Each 2.000 177.001 Seventy- 354.002
(SANITARY Engineer- in- charge. Four point
Seven
WORKS) i) 12 mm dia G.I. Union'' Zero Zero
point Zero
Two
Zero One

Two Two
Hundred Hundred
PART-C-ii : GATE
and and
HOUSE
167 14.(ii) ii) 20 mm dia G.I. Union Each 1.000 228.001 Twenty- 228.001 Twenty-
(SANITARY
Eight point Eight point
WORKS)
Zero Zero Zero Zero
One One

Two
One
Hundred
PART-C-ii : GATE Thousand
and
HOUSE AND
168 14.(iii) iii) 25 mm dia G.I. Union Each 4.000 274.001 Seventy- 1096.004
(SANITARY Ninety-Six
Four point
WORKS) point Zero
Zero Zero
Zero Four
One

Four Four
Hundred Hundred
PART-C-ii : GATE
and and
HOUSE
169 14.(iv) iv) 40 mm dia G.I. Union Each 1.000 491.001 Ninety- 491.001 Ninety-
(SANITARY
One point One point
WORKS)
Zero Zero Zero Zero
One One

170 PART-C-ii : GATE 15.(i) ''Supplying different inside dia best quality uPVC clean out / Each 6.000 671.001 Six 4026.006 Four
HOUSE trap having specific gravity 1.35 -1.45 and other physical, Hundred Thousand
(SANITARY chemical, themal, fire resistivity properties etc. as per BSTI and AND
WORKS) approved manufacturer standards or ASTM, BS/ISO/IS Seventy- Twenty-
standards, fitting and fixing in position etc. complete One point Six point

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 18/80
3/11/24, 2:55 PM View Form
approved and accepted by the Engineer- in- charge. Zero Zero Zero Zero
i) 100 mm dia uPVC Y or T - Y Cleanout'' One Six

Four Eight
PART-C-ii : GATE
Hundred Hundred
HOUSE
171 15.(ii) ii) 100 mm dia uPVC ?P? or ?S? trap Each 2.000 440.001 and Forty 880.002 and Eighty
(SANITARY
point Zero point Zero
WORKS)
Zero One Zero Two

Eleven Eleven
Thousand Thousand
Nine Nine
PART-C-ii : GATE Supplying, fitting and fixing of food graded plastic overhead
Hundred Hundred
HOUSE water reservoir /tank including all necessary fittings,
172 16 Each 1.000 11998.001 and 11998.001 and
(SANITARY hardware and consumables etc. all complete approved and
Ninety- Ninety-
WORKS) accepted by the Engineer- in- charge. 1000 liter capacity
Eight point Eight point
Zero Zero Zero Zero
One One

''Supplying, fitting and fixing of best quality country made 12

mm bib cock made from copper or copper alloy, chromium
plated.
The faucet conforms BDS EN 200:2009. The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or One Three
under. The faucet after it has been operated 100000 times it Thousand Thousand
shall be free from a seat- leakage and shall satisfy the One Five
PART-C-ii : GATE
reverse flow preventing performance. The inside and outside Hundred Hundred
HOUSE
173 17 surfaces of the faucet shall be smooth and be free from Each 3.000 1172.001 and 3516.003 and
(SANITARY
blowholes, fissures, remarkable flows or injurious defects. Seventy- Sixteen
WORKS)
The chromium plating on the faucet shall be of class 2 grade Two point point Zero
1. The final coating should be done with chromium of Zero Zero Zero
minimum 0.1 micron. One Three
The faucet shall be made leak proof and fixing in position
with selected tape etc. all complete approved and accepted
by the Engineer- in- charge.
a) Lever CP Conceal Bib Cock long body with aerator
(Oliver/spoon/delta/decent lever or similar)''

''Supplying, fitting and fixing of best quality surface mounted

or conceal stop cock/angle stop cock (lever or round headed)
with wall flange chromium plated.
The faucet conforms BDS EN 200:2009. The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or One One
under. The faucet after it has been operated 100000 times it Thousand Thousand
PART-C-ii : GATE shall be free from a seat- leakage and shall satisfy the One One
HOUSE reverse flow preventing performance. The inside and outside Hundred Hundred
174 18.a Each 1.000 1153.001 1153.001
(SANITARY surfaces of the faucet shall be smooth and be free from and Fifty- and Fifty-
WORKS) blowholes, fissures, remarkable flows or injurious defects. Three Three
The chromium plating on the faucet shall be of class 2 grade point Zero point Zero
1. The final coating should be done with chromium of Zero One Zero One
minimum 0.1 micron.
The faucet shall be made leak proof and fixing in position
with selected tape etc. , all complete approved and accepted
by the Engineer- in- charge.
a) 12 mm dia CP Concealed Stop Cock ''

One
Nine Thousand
Hundred Nine
PART-C-ii : GATE
and Hundred
HOUSE
175 18.b b) CP angle stop cock Each 2.000 988.001 Eighty- 1976.002 and
(SANITARY
Eight point Seventy-
WORKS)
Zero Zero Six point
One Zero Zero
Two

''Supplying, fitting and fixing of best quality pillar cock made

from copper or copper alloy, chromium plated materials.
The faucet conforms BDS EN 200:2009. The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or One One
under. The faucet after it has been operated 100000 times it Thousand Thousand
shall be free from a seat- leakage and shall satisfy the Eight Eight
PART-C-ii : GATE
reverse flow preventing performance. The inside and outside Hundred Hundred
HOUSE
176 19 surfaces of the faucet shall be smooth and be free from Each 1.000 1891.001 and 1891.001 and
(SANITARY
blowholes, fissures, remarkable flows or injurious defects. Ninety- Ninety-
WORKS)
The chromium plating on the faucet shall be of class 2 grade One point One point
1. The final coating should be done with chromium of Zero Zero Zero Zero
minimum 0.1 micron. One One
The faucet shall be made leak proof and fixing in position
with selected tape etc. all complete approved and accepted
by the Engineer- in- charge.
CP Single lever movig pillar cock''

Two Two
Thousand Thousand
Two Two
PART-C-ii : GATE ''Supplying and fitting-fixing Chromium plated (CP) Shower
Hundred Hundred
HOUSE head. all complete approved and accepted by the Engineer-
177 20 Each 1.000 2276.001 and 2276.001 and
(SANITARY in- charge.
Seventy- Seventy-
WORKS) Moving type 150 mm CP shower head''
Six point Six point
Zero Zero Zero Zero
One One

One
Two
Hundred
PART-C-ii : GATE Hundred
''Supplying, fitting and fixing of 12 mm dia connection pipe and
HOUSE and Forty-
178 21 approved and accepted by the Engineer- in- charge. Each 2.000 124.001 Twenty- 248.002
(SANITARY Eight point
600 mm long plastic flexible lead (connection) pipe'' Four point
WORKS) Zero Zero
Zero Zero
Two
One

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 19/80
3/11/24, 2:55 PM View Form
''Groove cutting in brick work and R.C.C work, including cost
for concealing of water distribution pipe work (12 mm and 20
Three
mm dia) in brick wall by cutting groove in wall, lintel, beam Seven
Hundred
PART-C-ii : GATE etc. by any means carefully without damaging the structure Thousand
and
HOUSE and filling the grooves with C.C (4:2:1) after laying of pipe Eight
179 22.a Rm 24.000 325.001 Twenty- 7800.024
(SANITARY including cost of scaffolding, finishing, curing etc. all Hundred
Five point
WORKS) complete approved and accepted by the Engineer- in- point Zero
Zero Zero
charge. Two Four
One
a) Groove size 40 mm x 40 mm (For laying 12 mm to 20 mm
dia pipes)''

Five One
PART-C-ii : GATE Hundred Thousand
HOUSE b) Groove size 75 mm x 75 mm (For 25 mm to 40 mm dia and Thirty- AND
180 22.b Rm 2.000 535.001 1070.002
(SANITARY pipes) Five point Seventy
WORKS) Zero Zero point Zero
One Zero Two

''Construction of masonry inspection pit with 250 mm thick Four Four

brick work in cement mortar (1:4) including necessary earth Thousand Thousand
work, side filling and one layer brick flat soling, 75 mm thick Six Six
PART-C-ii : GATE
(1:3:6) base concrete for making invert channel and 12 mm Hundred Hundred
HOUSE
181 23 thick (1:2) cement plaster with neat finishing etc. all complete Each 1.000 4683.001 and 4683.001 and
(SANITARY
up to a depth of 700 mm approved and accepted by the Eighty- Eighty-
WORKS)
Engineer- in- charge. Three Three
Master-pit of Size: Clear 600 mm x 500 mm and average 750 point Zero point Zero
mm depth for Septic tank.'' Zero One Zero One

''Construction of masonry inspection pits up to a depth of 700

mm with 250 mm thick brick work in cement mortar (1:4)
including 100 mm thick R.C.C. top slab (1:2:4) with 1%
Forty-Two
reinforcement, man-hole cover with locking arrangement
Seven Thousand
including necessary earth work, side filling and one brick flat
PART-C-ii : GATE Thousand One
soling. 75 mm thick (1:3:6) base concrete for making invert
HOUSE AND Hundred
182 24.a channel and 12 mm thick (1:2) cement plaster with neat Each 6.000 7019.001 42114.006
(SANITARY Nineteen and
finishing etc. all complete approved and accepted by the
WORKS) point Zero Fourteen
Engineer- in- charge.
Zero One point Zero
a) Clear 450 mm x 450 mm and depth 450 mm to 600 mm,
Zero Six
average 525 mm for single 150 mm dia R.C.C. pipes and
400 mm PVC pipe with pit cover and 450 mm dia C.I. man-
hole cover.''

Twelve Twelve
Thousand Thousand
PART-C-ii : GATE b) Clear 600 mm x 600 mm and depth 750 mm to 900 mm, Five Five
HOUSE average 825 mm for single 300 mm dia R.C.C. pipes and Hundred Hundred
183 24.b Each 1.000 12554.001 12554.001
(SANITARY 375 mm and 400 mm PVC pipe with pit cover and 450 mm and Fifty- and Fifty-
WORKS) dia C.I. man-hole cover. Four point Four point
Zero Zero Zero Zero
One One

''Construction of septic tank of different sizes with walls of

brick work in cement mortar (1:6) having a lining of minimum
125 mm R.C.C cast against the walls as per approved type
plan over a brick flat soling and 150 mm thick reinforced
cement concrete flooring (1:2:4) with 125 mm thick walls in One Lakh One Lakh
partition and 12 mm thick cement plaster (1:4) with N.C.F. to Sixty- Sixty-
insides of walls on floor and all around outside walls by 450 Three Three
mm height at top including supplying, fitting and fixing of two Thousand Thousand
PART-C-ii : GATE
R.C.C. Tees and providing 450 mm dia water sealed heavy Four Four
HOUSE
184 25 type C.I. manhole cover with locking/unlocking arrangement Each 1.000 163498.001 Hundred 163498.001 Hundred
(SANITARY
and 100 mm thick R.C.C (1:2:4) top slab, including centering, and and
WORKS)
shuttering, fabricating, casting and curing etc. complete up to Ninety- Ninety-
required depth including necessary earth work in excavation Eight point Eight point
and shoring, bailing out water and side filling including the Zero Zero Zero Zero
cost of all materials, operations and incidental charges. etc. One One
all complete as per type plan approved and accepted by the
Engineer-in-charge (Rate is including cost of reinforcement
and its fabrication, binding and placing).
For 50 users''

''Construction of soak well of different sizes (as per detail

drawing attached in annexure) (medium and large sizes) with
250 mm thick solid brick work and 250 mm honey comb brick
work with cement mortar (1:6) as per design over R.C.C.
(1:2:4) well curb with 1% reinforcement up to the depth as
per drawing with 450 mm dia water sealed heavy type. C.I. One Lakh One Lakh
PART-C-ii : GATE
manhole cover with locking arrangement, filling the well up to Forty Forty
HOUSE
185 26 the required depth with graded khoa including supplying and Each 1.000 140000.001 Thousand 140000.001 Thousand
(SANITARY
fabricating M.S. rod, casting, curing including necessary point Zero point Zero
WORKS)
earth work in excavation, side filling and bailing out water Zero One Zero One
including cost of all materials etc. all complete as per
drawing, design approved and accepted by the (Rate is
including cost of reinforcement and its fabrication, binding
and placing) Engineer- in- charge.
For 50 users''

Eighteen Eighteen
''Supplying, fitting, fixing of foreign made best quality
Thousand Thousand
Reverse Osmosis Water Purifier (Kent/ Unilever/ Vapor water
Five Five
PART-C-ii : GATE purifier or equivalent brand) for purification of water by
Hundred Hundred
HOUSE reverse osmosis system to have potable water conforming
186 27 Each 1.000 18577.001 and 18577.001 and
(SANITARY WHO standard and Bangladesh concentration parameters
Seventy- Seventy-
WORKS) including installation charge, carriage, sundries etc. complete
Seven Seven
approved and accepted by the Engineer- in- charge.
point Zero point Zero
Water purification capacity: 10 L/hr, storage 6 litre; RO+MF''
Zero One Zero One

187 PART-C-iii : GATE 1 ''Concealed conduit point wiring (BYM) (without switch): Point 25.000 1261.001 One 31525.025 Thirty-One
HOUSE Concealed conduit wiring for following point looping at the Thousand Thousand
(ELECTRICAL switch board with earth terminal with 1C-2x1.5 sqmm PVC Two Five
WORKS) insulated and sheathed stranded cable (BYM) & same size Hundred Hundred
PVC insulated ECC (BYA) (Green / White color) including and Sixty- and
circuit wiring with IC-2x2.5 sqmm PVC insulated and One point Twenty-
sheathed stranded cable (BYM) & same size PVC insulated Zero Zero Five point
ECC (BYA) Green / White color through PVC conduit (one One Zero Two
conduit from switch board to common point on ceiling is Five
considered to draw 3 pair of cable ) of reputed manufacturer

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 20/80
3/11/24, 2:55 PM View Form
of minimum 25 mm dia & 1.5 mm wall thickness complete
with 18 SWG GP sheet / PVC switch board & pull box with
3mm thick ebonite sheet cover, without switch, fixing
materials etc.(without switch) as required including mending
the damages good. All electrical contacts shall be of brass /
copper connected through connector or soldering (no twisting
shall be allowed) and cables shall be manufactured and
tested according to relevant IEC / BDS / BS / VDE standards
and as per detailed specification mentioned in Annexure-1.
The work shall be carried out as per direction & approval of
the Engineer.
Cable manufacturer(s) must have valid test certificate (within
last seven years ) from internationally accrediated laboratory
(like CPRI, KEMA etc) accepted / approved by the Engineer.
1.1) Light/ exhaust or wall bracket fan point''

''Concealed wiring (BYM): Concealed conduit wiring with

following PVC insulated and sheathed stranded cable (BYM)
& PVC insulated Green / White coloured ECC wire (BYA)
through PVC conduit of reputed manufacturer complete with
18 SWG GP sheet and pull box with 3mm thick ebonite sheet
cover, fixing materials etc. as required including mending the
damages good. All electrical contacts shall be of brass /
Two
copper connected through connector or soldering ( no Fifty-Two
PART-C-iii : GATE Hundred
twisting shall be allowed) and cables shall be manufactured Thousand
HOUSE and Sixty-
188 2 and tested according to relevant IEC / BDS / BS / VDE Rm 200.000 261.001 52200.200 Two
(ELECTRICAL One point
standards and as per detailed specification mentioned in Hundred
WORKS) Zero Zero
Annexure-1. The work shall be carried out as per direction & point Two
One
approval of the Engineer.
Cable manufacturer(s) must have valid test certificate (within
last seven years) from internationally accrediated laboratory
(like CPRI, KEMA etc) accepted / approved by the Engineer.
2.1) 1C-2x2.5sqmm (BYM) cable with 2.5sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 16 mm having
wall thickness of 1.5 mm''

''Concealed wiring (NYY) (through PVC conduit):

Concealed conduit wiring with the following PVC insulated
and sheathed stranded cable (NYY) / XLPE insulated and
PVC sheathed stranded cable (2XY) & PVC insulated Green
/ Yellow bi-colour ECC wire (BYA) through PVC conduit of
reputed manufacturer complete with fixing materials other
accessories etc. as required including mending the damages
Five
good. All electrical contacts shall be of brass / copper
Hundred Fifty-Two
PART-C-iii : GATE connected through connector or soldering (no twisting shall
and Thousand
HOUSE be allowed) and cables shall be manufactured and tested
189 3 Rm 100.000 528.001 Twenty- 52800.100 Eight
(ELECTRICAL according to IEC / BS / VDE standards along with relevant
Eight point Hundred
WORKS) BDS standard as per detailed specification mentioned in
Zero Zero point One
Annexure-1. The work shall be carried out as per direction &
One
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge.
a) 1C-4x2.5 sqmm (NYY / 2XY) with 2.5 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 30 mm having
wall thickness of 1.9 mm.''

''SURFACE WIRING (BYM) (THROUGH PVC CONDUIT):

Surface conduit wiring with the following PVC insulated and
sheathed cable (BYM) & Green / Yellow bi-colour PVC
insulated ECC wire (BYA) through PVC conduit of reputed
manufacturer complete with 18 SWG GP sheet pull box with
3 mm thick ebonite sheet cover, fixing materials, other
accessories etc. as required including mending the damages
One
good. All electrical contacts shall be of brass / copper Nine
Hundred
PART-C-iii : GATE connected through connector or soldering (no twisting shall Thousand
and
HOUSE be allowed) and cables shall be manufactured and tested Six
190 4.1 Rm 50.000 192.001 Ninety- 9600.050
(ELECTRICAL according to IEC / BS / VDE standards along with relevant, Hundred
Two point
WORKS) BDS standard as per detailed specification mentioned in point Zero
Zero Zero
Annexure-1. The work shall be carried out as per direction & Five
One
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge.
4.1) 1C-2x1.5 sqmm (BYM) cable with 1.5 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 20 mm having
wall thickness of 1.5 mm''

Two
PART-C-iii : GATE Twenty-
1C-2x2.5sqmm (BYM) cable with 2.5 sqmm (BYA) ECC wire Hundred
HOUSE Six
191 4.2 through PVC pipe of minimum inner dia 25 mm having wall Rm 100.000 260.001 and Sixty 26000.100
(ELECTRICAL Thousand
thickness of 1.7 mm point Zero
WORKS) point One
Zero One

Three Sixteen
PART-C-iii : GATE Hundred Thousand
1C-2x4.0 sqmm (BYM) cable with 4 sqmm (BYA) ECC wire
HOUSE and Thirty- Nine
192 4.3 through PVC pipe of minimum inner dia 25 mm having wall Rm 50.000 338.001 16900.050
(ELECTRICAL Eight point Hundred
thickness of 1.7 mm
WORKS) Zero Zero point Zero
One Five

193 PART-C-iii : GATE 5 ''SURFACE WIRING (NYY) (THROUGH PVC CONDUIT) : Rm 150.000 1711.001 One 256650.150 Two Lakh
HOUSE Surface conduit wiring with the following PVC insulated and Thousand Fifty-Six
(ELECTRICAL sheathed stranded cable (NYY) / XLPE insulated and PVC Seven Thousand
WORKS) sheathed stranded cable (2XY) & PVC insulated Green / Hundred Six
Yellow bi-colour , ECC wire (BYA) through PVC conduit of and Hundred
reputed manufacturer complete with fixing materials, other Eleven and Fifty
accessories etc. as required including mending the damages point Zero point One
good. All electrical contacts shall be of brass / copper Zero One Five
connected through connector or soldering (no twisting shall
be allowed) and cables shall be manufactured and tested
according to IEC / BS / VDE standards along with relevant
BDS standard as per detailed specification mentioned in
Annexure-1. The work shall be carried out as per direction &
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 21/80
3/11/24, 2:55 PM View Form
etc.) accepted / approved by the Engineer In Charge .
5.1) 1C-4x16sqmm (NYY / 2XY) with 16 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 40 mm having
wall thickness of 2.2 mm''

''UNIVERSAL COMBINED SWITCH SOCKET OUTLET

(SURFACE/CONCEALED TYPE):
Providing & fixing 250 volt single phase universal combined
Two
switch socket outlet (surface / concealed type) Manufactured/
Thousand
Assembled and tested in accordance with IEC / VDE / NEMA Nine
Eight
PART-C-iii : GATE / BS / JIS along with relevant BDS IEC standards mounted Hundred
Hundred
HOUSE on required size 18 SWG galvanized plain sheet board / and Forty-
194 6.a each 3.000 942.001 2826.003 and
(ELECTRICAL plastic board (self-extinguishing 650 degree centigrade) of Two point
Twenty-
WORKS) 76.2 mm. (3'''') depth. Sample to be approved by the Zero Zero
Six point
Engineer-in-charge.Manufacturer shall have certificate of One
Zero Zero
standard which they follow.
Three
a) 13 / 15 / 16 / 20 Amps.
Made in HONGKONG / MALAYSIA / SINGAPORE / S
KOREA / THAILAND''

Seven Seven
PART-C-iii : GATE Hundred Hundred
''5 - 10 Amps.
HOUSE and and
195 6.b Made in HONGKONG / MALAYSIA / SINGAPORE / S each 1.000 715.001 715.001
(ELECTRICAL Fifteen Fifteen
KOREA / THAILAND''
WORKS) point Zero point Zero
Zero One Zero One

''GANG SWITCH:
Providing & fixing 250 volts. 5 / 6 amps (minimum) concealed
type following switch / switch socket manufactured and Two Two
PART-C-iii : GATE tested in accordance with relevant IEC / VDE / NEMA / BS / Hundred Hundred
HOUSE JIS standards mounted on required size 18 SWG galvanized and and
196 7.1 each 1.000 218.001 218.001
(ELECTRICAL plain sheet / PVC board (Self-extinguishing 650oC) of 76.2 Eighteen Eighteen
WORKS) mm (3'''') depth. All electrical contacts shall be of brass / point Zero point Zero
copper. Made in HONGKONG / MALAYSIA / SINGAPORE / Zero One Zero One
S KOREA / THAILAND
7.1) One gang switch ''

One
Five Thousand
PART-C-iii : GATE Hundred Five
HOUSE and Hundred
197 7.2 Three gang switch each 3.000 514.001 1542.003
(ELECTRICAL Fourteen and Forty-
WORKS) point Zero Two point
Zero One Zero Zero
Three

One
Thousand
Seven
Five
PART-C-iii : GATE Hundred
Hundred
HOUSE and Sixty-
198 7.3 Four gang switch each 2.000 763.001 1526.002 and
(ELECTRICAL Three
Twenty-
WORKS) point Zero
Six point
Zero One
Zero Zero
Two

''SPOT/PANEL LED LIGHT FITTINGS:

Supply & fixing spot/Panel LED light fittings of following
specifications:
Luminous efficacy:
i) For Spot/Bracket LED Light Fittings: 80 lm/W (min),
ii) For Panel/Tube Light Fittings: 100 lm/W (min)
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :
i) For Residential building Ra≥80
ii) For office and other types of buildings 70≤Ra< 85
Driver: Should be of IEC standard such as
MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or Ten
One
equivalent Thousand
PART-C-iii : GATE Thousand
LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE Six
HOUSE AND
199 8 / BRIDGELUX or equivalent. each 10.000 1068.001 10680.010 Hundred
(ELECTRICAL Sixty-Eight
Colour temperature : 3500K-6500K (Warm-White) and Eighty
WORKS) point Zero
Model & sample to be accepted / approved by the Engineer- point Zero
Zero One
in-charge (with 2 years warranty). One
Round panel (surface type)
Material: Alu Aloy, Acrylic
Gloria Cat No-GSDL-513
Energy + cat No-EPPLLED-2006
Cosmo cat no-BDTCL-LSRPL-01
Adex-AD SDL 830/840/865
Asha Cat no- ACS LPL-1451
Megaman-MXTL1013-Y
Walton WLED-DSPLR-200-UL or equivalent.
18 W,
Approximate Dia -218 mm''

200 PART-C-iii : GATE 9 ''BATHROOM LIGHT FITTING: each 1.000 3184.001 Three 3184.001 Three
HOUSE Supply & fixing LED bathroom light fittings of the following Thousand Thousand
(ELECTRICAL specifications: One One
WORKS) Luminous efficacy: 80 lm/w(minimum), Hundred Hundred
Power Factor: minimum 0.95 and and
Colour Rendering Index(Ra) : Eighty- Eighty-
i) For Residential building Ra≥80 Four point Four point
ii) For office and other types of buildings 70≤Ra< 85 Zero Zero Zero Zero
Driver: Should be of IEC standard such as One One
MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or
equivalent
LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE
/ BRIDGELUX or equivalent. Colour temperature : 3500K-
6500K (Warm-White)
Model & sample to be accepted / approved by the Engineer-
in-charge (with 2 years warranty).
Material: MS Sheet, Aluminium Sheet, Acrylic (thick-12mm)
L-400mm H-90mm P-40mm GLORIA cat No.GLML. 2106,
Energy+ Cat no-EPML-10029 (small), Cosmo Cat No-

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 22/80
3/11/24, 2:55 PM View Form
BDTCL-LML-01,
Asha Cat no-ACS ?LBB-2837 or equivalent. 15 Watt fittings.''

''GATE LIGHT FITTINGS (LED) :

Supply & fixing LED garden & gate light fittings of following
specifications:
Luminous efficacy: 80 lm/w(minimum),
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :
i) For Residential building Ra≥80
ii) For office and other types of buildings 70≤Ra< 85
Three Twelve
Driver: Should be of IEC standard such as MEANWELL/
Thousand Thousand
OSRAM/ ENERGY+/ SIGNIFY (PHILIPS) or equivalent
One Four
PART-C-iii : GATE LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE
Hundred Hundred
HOUSE / BRIDGELUX or equivalent.
201 10 each 4.000 3123.001 and 12492.004 and
(ELECTRICAL Colour temperature : 3500K-6500K (Warm-White)
Twenty- Ninety-
WORKS) Model & sample to be accepted / approved by the Engineer-
Three Two point
in-charge (with 2 years warranty).
point Zero Zero Zero
Watt: 15W LED bulb, Voltage: AC165-265V
Zero One Four
With Dia: 210 mm & Height :475 mm
Material: Aluminium alloy, MS sheet painted with epoxy
powder paint & acrylic
Cast Aluminium thickness : minimum 5 mm
Gloria cat no- GGL-307, Energy+EPGL-16041
Asha-ACS-GL-9307, Crescent-CGL -74
LED: 15W or similar product of SUNKO, ANNYESHA, FLOS
or equivalent''

''FLOOD LIGHT FITTINGS (LED):

Supply & fixing LED flood light fittings of following
specifications:
Luminous efficacy: 100lm/w(minimum),
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :70≤Ra< 85
Driver: Should be of IEC standard such as
Five
MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or Twenty-
Thousand
equivalent Three
Nine
PART-C-iii : GATE LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE Thousand
Hundred
HOUSE / BRIDGELUX or equivalent. Nine
202 11 Each 4.000 5976.001 and 23904.004
(ELECTRICAL Colour temperature : 3500K-6500K (Warm-White) Hundred
Seventy-
WORKS) Material: Aluminium Alloy Aluminium reflector, Heat proof and Four
Six point
glass/Polycarbonate point Zero
Zero Zero
Model & sample to be accepted / approved by the Engineer- Zero Four
One
in-charge (with 2 years warranty).
100 W
Gloria Cat no-GLFL-902
Energy+ cat no-EPFDL-17001 (100 W)
Cosmo cat no-BDTCL-LFDL-02
Adex-AD FLE 100W830
Asha cat No-ACS-LFL-2155- (100 W) or equivalent.''

''CIRCUIT BREAKER (SPMCB):

Providing & fixing on a prepared board 250 volt grade Three
Seven
PART-C-iii : GATE following single pole miniature circuit breaker (SPMCBS) Thousand
Hundred
HOUSE having minimum breaking capacity 6-KA with thermal over- Nine
203 12.a each 5.000 780.001 and Eighty 3900.005
(ELECTRICAL current and instantaneous electromagnetic short circuit Hundred
point Zero
WORKS) release provision. as per SPMCBS accepted / approved by point Zero
Zero One
the engineer. Zero Five
a) 10 Amps.''

Six
Seven Thousand
PART-C-iii : GATE
Hundred Two
HOUSE
204 12.b 16 Amps. each 8.000 780.001 and Eighty 6240.008 Hundred
(ELECTRICAL
point Zero and Forty
WORKS)
Zero One point Zero
Zero Eight

Seven Seven
PART-C-iii : GATE
Hundred Hundred
HOUSE
205 12.c 20 Amps. each 1.000 780.001 and Eighty 780.001 and Eighty
(ELECTRICAL
point Zero point Zero
WORKS)
Zero One Zero One

Seven Seven
PART-C-iii : GATE
Hundred Hundred
HOUSE
206 12.d 25 Amps. each 1.000 780.001 and Eighty 780.001 and Eighty
(ELECTRICAL
point Zero point Zero
WORKS)
Zero One Zero One

''TPMCB :
Providing & fixing on a prepared board 500 volt grade Four Four
PART-C-iii : GATE following Triple pole miniature circuit Breaker (TPMCB) Thousand Thousand
HOUSE having minimum breaking capacity 6-KA /10 KA with thermal AND AND
207 13 each 1.000 4030.001 4030.001
(ELECTRICAL over-current and instantaneous electromagnetic short circuit Thirty Thirty
WORKS) release provision. point Zero point Zero
TPMCB accepted / approved by the engineer. Zero One Zero One
20 Amps.''

''TPMCCB:
Seven Seven
Providing & fixing on a prepared board 500 volt grade
Thousand Thousand
following triple-pole molded case circuit breaker (TPMCCB)
PART-C-iii : GATE Four Four
with thermal over-current and instantaneous electromagnetic
HOUSE Hundred Hundred
208 14 short circuit release provision, manufactured and tested in each 1.000 7466.001 7466.001
(ELECTRICAL and Sixty- and Sixty-
accordance with relevant IEC / VDE / NEMA / BS / JIS
WORKS) Six point Six point
standards.
Zero Zero Zero Zero
TPMCCB accepted / approved by the engineer.
One One
60 Amps. (minimum 10-KA)''

''BUS - BAR: Two Two

Providing and fixing 500 V 3-phase bus-bar system Thousand Thousand
PART-C-iii : GATE assembled in prelaid board with porcelain insulators. There Five Five
HOUSE will be equal size holes on every bar at 0.5'''' interval and bar Hundred Hundred
209 15 each 1.000 2544.001 2544.001
(ELECTRICAL to bar gap shall be 2'''' - 3''''. and Forty- and Forty-
WORKS) a) 60 - 100 Amps. Copper flat bar (5 nos) : 4 nos Four point Four point
9''''x1''''x3mm and 1 no 4''''x1''''x4mm for earthing mounted on Zero Zero Zero Zero
insulator at both ends individually.'' One One

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 23/80
3/11/24, 2:55 PM View Form
''BOARD:
Supplying and fixing of almirah type 18 SWG metal board of
depth 228mm (6?) duly painted with powder coating with
epoxy polyester resin on all surfaces of board (gray / off-
white) having built in push type / suitable locking Eighteen Eighteen
arrangement including metal bridges of suitable size for fixing Thousand Thousand
PART-C-iii : GATE
of all electrical control devices complete with suitable Seven Seven
HOUSE
210 16 anchoring arrangement in wall / column and keeping sqm 1.000 18780.001 Hundred 18780.001 Hundred
(ELECTRICAL
provision for cable inlets and exits as required (only front and Eighty and Eighty
WORKS)
surface of the board will be considered for measurement). point Zero point Zero
(Manufactured by RECO / NASCO / C&S or equivalent Zero One Zero One
product of any other manufacturer) The front side of the
boards should be covered with required size tempered thick
fiber glass with rubber gaskets to observe the inside
arrangement. ''

''TELECOMMUNICATION CABLE:
Supplying and drawing of following sizes PVC insulated &
PART-C-iii : GATE sheathed twisted pair telecommunication cables having dia Thirty-
Seventeen
HOUSE of each core is 0.6 mm through prelaid pipes. Four point
211 17 Rm 500.000 34.001 17000.500 Thousand
(ELECTRICAL Cable manufacturer(s) must have valid test certificate from Zero Zero
point Five
WORKS) internationally accrediated laboratory (like CPRI, KEMA etc) One
approved / accepted by the Engineer.
a) 1C-4x0.282 sqmm (2 pair)''

''CO-AXIAL CABLE :
Supplying & drawing of following sizes PVC insulated & One Sixteen
PART-C-iii : GATE sheathed 75 ohm impedance co-axial cables through prelaid Hundred Thousand
HOUSE pipes. and Eight
212 18 Rm 150.000 112.001 16800.150
(ELECTRICAL Cable manufacturer(s) must have valid test certificate from Twelve Hundred
WORKS) internationally accrediated laboratory (like CPRI, KEMA etc) point Zero point One
approved/ accepted by the Engineer. Zero One Five
a) RG-11''

One
Thousand
PART-C-iii : GATE ''CABLE / SOCKET / FERULES : Sixty-
Three
HOUSE Supply and fixing of copper made sockets / ferules for Seven
213 19.a Each 20.000 67.001 1340.020 Hundred
(ELECTRICAL following size cables (need to be shown voltage rating.) point Zero
and Forty
WORKS) a) 16 sqmm'' Zero One
point Zero
Two

Seven
PART-C-iii : GATE Seventy-
Hundred
HOUSE Nine point
214 19.b 25 sqmm Each 10.000 79.001 790.010 and Ninety
(ELECTRICAL Zero Zero
point Zero
WORKS) One
One

''PVC PIPE :
Providing & laying of following PVC pipe (best quality PVC
PART-C-iii : GATE pipe of reputed manufacturer) embedded in wall / column /
Fifty point Ten
HOUSE ceiling / floor etc. with all accessories, 18 SWG GP sheet pull
215 20.a Rm 200.000 50.001 Zero Zero 10000.200 Thousand
(ELECTRICAL box with 3 mm thick ebonite sheet cover, fixing materials etc.
One point Two
WORKS) as required including mending the damages good.
a) Minimum inner dia 20 mm & minimum wall thickness 1.5
mm. ''

Six
PART-C-iii : GATE Sixty-
Thousand
HOUSE b) Minimum inner dia 25 mm & minimum wall thickness 1.7 Seven
216 20.b Rm 100.000 67.001 6700.100 Seven
(ELECTRICAL mm. point Zero
Hundred
WORKS) Zero One
point One

''Earth work in excavation in all kinds of soil for foundation

trenches including layout, providing center lines, local bench-
mark pillars, levelling, ramming and preparing the base,
fixing bamboo spikes and marking layout with chalk powder,
providing necessary tools and plants, protecting and Fifty
maintaining the trench dry etc., stacking, cleaning the Thousand
PART-D-i :
excavated earth at a safe distance out of the area enclosed Nineteen Three
INTERNAL RCC
217 1.a by the layout etc. all complete and accepted by the Engineer- Sqm. 2650.000 19.001 point Zero 50352.650 Hundred
ROAD (CIVIL
in-charge, subject to submit method statement of carrying out Zero One and Fifty-
WORKS)
excavation work to the Engineer-in-charge for approval. Two point
However, engineer's approval shall not relieve the contractor Six Five
of his responsibilities and obligations under the contract.
a) Layout and marking for earthwork in excavation in
foundation accepted by the Engineer-in-charge. [Plinth area
of the structure shall be considered for measurement]''

One Lakh
Seventy
One Thousand
PART-D-i : Hundred Five
INTERNAL RCC Earthwork in excavation in foundation trenches up to 1.5 m and Sixty- Hundred
218 1.b Cum 1015.000 168.001 170521.015
ROAD (CIVIL depth and maximum 10 m lead Eight point and
WORKS) Zero Zero Twenty-
One One point
Zero One
Five

One Thirteen
Hundred Thousand
PART-D-i :
and Eight
INTERNAL RCC Added rate for Each additional 0.5 meter depth exceeding
219 1.c Cum 70.000 198.001 Ninety- 13860.070 Hundred
ROAD (CIVIL 1.5 meter to 2.0 meter Depth
Eight point and Sixty
WORKS)
Zero Zero point Zero
One Seven

Two Fifteen
Hundred Thousand
PART-D-i :
and Nine
INTERNAL RCC Added rate for Each additional 0.5 meter depth exceeding
220 1.d Cum 70.000 228.001 Twenty- 15960.070 Hundred
ROAD (CIVIL 2.0 meter to 2.5 meter Depth
Eight point and Sixty
WORKS)
Zero Zero point Zero
One Seven

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 24/80
3/11/24, 2:55 PM View Form
Four Fifty-Six
Hundred Thousand
PART-D-i :
and Eight
INTERNAL RCC Bailing out of trapped water caused by inundation or rain, by
221 2 Hour 120.000 474.001 Seventy- 56880.120 Hundred
ROAD (CIVIL pump from foundation trenches.
Four point and Eighty
WORKS)
Zero Zero point One
One Two

Eighty-Six
Supplying of straight and strong borrak bamboo posts of
PART-D-i : Thousand
having minimum 75 mm diameter althrough and driving the Ninety
INTERNAL RCC Four
222 3 same vertically in the ground up to required depth by any Meter 960.000 90.001 point Zero 86400.960
ROAD (CIVIL Hundred
means shaping the top of the post, all complete and Zero One
WORKS) point Nine
accepted by the Engineer-in-charge.
Six

One Lakh
Palisading work by supplying of bitumen drum sheet walling Six
Forty-Four
PART-D-i : tied with 20 BWG G.I. wire fixing the same with already Hundred
Thousand
INTERNAL RCC driven borrak bamboo posts with half split borrak bamboo and
223 4 Sqm 235.000 613.001 144055.235 AND Fifty-
ROAD (CIVIL runners @ 450mm c/c horizontally with iron nails, G.I wire Thirteen
Five point
WORKS) etc. all complete and accepted by the Engineer-in-charge. point Zero
Two Three
(Rate is excluding the cost of bamboo post). Zero One
Five

One
Sand filling in foundation trenches and plinth with sand
Thousand Twenty-
having min. F.M. 1.2 in 150 mm in layers including leveling,
PART-D-i : Two Five Lakh
watering and compaction to achieve minimum dry density of
INTERNAL RCC Hundred Ninety-
224 5 95% with optimum moisture content (Modified proctor test) Cum 2000.000 1296.001 2592002.000
ROAD (CIVIL and Two
by ramming each layer up to finished level as per design
WORKS) Ninety-Six Thousand
supplied by the design office only, all complete and accepted
point Zero AND Two
by the Engineer-in-charge.
Zero One

Earth filling in foundation trenches and plinth in 150 mm layer Forty-Five

with earth available within 90 m of the building site to achive Two Thousand
PART-D-i :
minimum dry density of 95% with optimum moisture content Hundred Five
INTERNAL RCC
225 6 (Modified proctor test) including carrying watering, leveling, Cum 220.000 207.001 and Seven 45540.220 Hundred
ROAD (CIVIL
dressing and compacting to a specified percentage each point Zero and Forty
WORKS)
layer up to finished level etc. all complete and accepted by Zero One point Two
Engineer-in-charge. Two

Three
Lakh
Fourteen Thirty-
Thousand Three
PART-D-i : Five Thousand
INTERNAL RCC Hundred Seven
226 7 Dry Lean Concrete Class - 20 (concrete mixture). Cum 23.000 14512.001 333776.023
ROAD (CIVIL and Hundred
WORKS) Twelve and
point Zero Seventy-
Zero One Six point
Zero Two
Three

Thirty-Five
Brick works with first class bricks with cement sand (F.M. 1.2) Lakh
mortar (1:4) in exterior walls including filling the interstices Ten Eighty-
with mortar, raking out joints, cleaning and socking the bricks Thousand Four
PART-D-i :
at least for 24 hours before use and washing of sand, AND Thousand
INTERNAL RCC
227 8 necessary scaffolding, curing at least for 7 days etc. all Cum 355.000 10097.001 Ninety- 3584435.355 Four
ROAD (CIVIL
complete including cost of water, electricity and other Seven Hundred
WORKS)
charges (measurement to given as 250 mm width for one point Zero and Thirty-
brick length and 375 mm for one brick and a half brick length) Zero One Five point
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M) Three Five
Five

One Lakh
Twenty-
Four
PART-D-i : Supplying and laying of single layer polythene sheet Forty- Thousand
INTERNAL RCC weighing one kilogram per 6.5 square meter in floor or any Seven Three
228 9 Sqm 2645.000 47.001 124317.645
ROAD (CIVIL where below cement concrete complete in all respect and point Zero Hundred
WORKS) accepted by Engineer-in-charge. Zero One and
Seventeen
point Six
Four Five

Providing compacted sub-base course with well graded

material of crushed well burnt picked jhama / 1st class brick Forty-Two
Six
bats and sand (FM 0.8) with mixing proportion 2 : 1 having Lakh
Thousand
PART-D-i : compacted thickness made as per specification including Sixty-Five
Four
INTERNAL RCC local handling, spreading uniformly to proper grade camber Thousand
229 10 Cum 666.000 6404.001 Hundred 4265064.666
ROAD (CIVIL and super elevation, packing, rolling properly with 8 to 10 ton AND
and Four
WORKS) capacity power driven road roller and watering properly for Sixty-Four
point Zero
compaction of 100% MDD (standard) blinding with sand point Six
Zero One
including cost of fuel, lubricants, spares, maintenance, driver Six Six
etc. all complete and accepted by the Engineer-in-charge.

Seventy-
Sixteen
Seven
Thousand
Lakh Four
Nine
PART-D-i : Thousand
Hundred
INTERNAL RCC Cement Concrete Pavment (Concrete Class - 25) (concrete Eight
230 11 Cum 454.000 16971.001 and 7704834.454
ROAD (CIVIL mixture). Hundred
Seventy-
WORKS) and Thirty-
One point
Four point
Zero Zero
Four Five
One
Four

231 PART-D-i : 12 Testing work of concrete cylinder [From BUET (BRTC), Set 5.000 4875.001 Four 24375.005 Twenty-
INTERNAL RCC KUET (CRTS), RUET (DCE), SUST (CRTC) & DUET (DCE)] Thousand Four
ROAD (CIVIL size 150mm dia and 300mm hight for testing compressive Eight Thousand
WORKS) strength in the laboratory approved by the Engineer including Hundred Three
making cylinder using steel mould, curing the cylinder to the and Hundred
laboratory payment of the testing fees etc. complete as per Seventy- and
direction of the Engineer in charge. (Payment should be Five point Seventy-
made for the cylinders tested whoes strenght attain the Zero Zero Five point
specified strength of the concrete.) One

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 25/80
3/11/24, 2:55 PM View Form
Zero Zero
Five

''Supplying, fabrication and fixing to detail as per design :

ribbed or deformed bar reinforcement (excluding laboratory
test fees) for Reinforced concrete, produced and marked in
accordance with BDS ISO 6935-2:2016 (or standard
subsequently released from BSTI) including straightening
and cleaning rust, if any, bending and binding in position with
supply of G.I. wires,conducting necessary laboratory tests
etc. (excluding splices or laps) complete in all respect and
One Lakh
accepted by the Engineer-in-charge. (Measurement shall be
PART-D-i : Twenty-
recorded only on standard mass per unit length of bars, while Sixty-One
INTERNAL RCC Two
232 13 dia of bars exceeds its standard) Ton 50.000 122000.001 6100000.050 Lakh point
ROAD (CIVIL Thousand
Grade 400 (B400DWR / B420DWR: complying BDS ISO Zero Five
WORKS) point Zero
6935-2:2016 / ASTM A615) ribbed or deformed bar produced
Zero One
and marked according to Bangladesh standard, with
minimum yield strength, fy (ReH)= 400 MPa but fy not
exceeding 480 MPa and whatever is the actual yield strength
within allowable limit as per BNBC/ ACI 318, the ratio of
ultimate tensile strength fu to yield strength fy, shall be at
least 1.25 and minimum elongation after fracture and
minimum total elongation at maximum force is 17% and 8%
respectively:''

One Lakh
Providing painting at the top of the road surface as road
Ninety-
marking in two coats with approved best quality and colour of
Three Four
Thermo-plastic paint, approved quality of paint from
Hundred Thousand
PART-D-i : authorized local agent of the manufacturer in a sealed
and Seven
INTERNAL RCC container having high water resistance, high bondability &
233 14 Sqm 525.000 371.001 Seventy- 194775.525 Hundred
ROAD (CIVIL flexibility, using specific brand thinner applied by brass/ roller
One point and
WORKS) or others over a coat of priming, providing elapsing time for
Zero Zero Seventy-
drying including surface cleaning from dust, oil or dirt,
One Five point
smoothening, finishing necessary tools etc. all complete &
Five Two
approved and accepted by the Engineer-in-charge.
Five

Providing expansion joints across the R.C.C. road pavement

with 20 mm gap between the adjacent panels. Supplying
Two Lakh
dowel bars of size 12 mm dia and 600 mm long M.S rod
Four Twenty-
placed @ 750 mm c/c. 300 mm of the bar being fixed within
Hundred Six
PART-D-i : one slab keeping remaining portion the bar free within the
and Thousand
INTERNAL RCC adjacent slab being inserted in 20 mm dia and 300 mm long
234 15 Rm 480.000 472.001 Seventy- 226560.480 Five
ROAD (CIVIL P.V.C. pipe embedded in the slab, inside of pipe fully
Two point Hundred
WORKS) greased, filling the gap between the slabs (with admixture) of
Zero Zero and Sixty
hot bitumen and coarse sand (F.M. 2.2) in proportion of 2:1,
One point Four
finishing the top with bitumen, spreading coarse sand over
Eight
the joint, all complete as per plan, drawing and accepted by
the Engineer-in-charge.

Providing brick works for 200 mm x 50 mm facing in

superstructure with 200 mm x 50 mm x 50 mm machine Seventy-
made hard pressed klinker facing red or maroon strips of Two One Lakh
approved quality with 20 mm thick cement sand (F.M.1.2) Thousand Fourteen
PART-D-i : mortar (1:4), 10 mm thick cement mortar in adjacent sides Nine Thousand
INTERNAL RCC including racking out joints and cutting the bricks to required Hundred Nine
235 16 Sqm 2425.000 2934.001 7114952.425
ROAD (CIVIL sizes wherever necessary with high class recessed pointing, and Thirty- Hundred
WORKS) cleaning and soaking the bricks for at least 24 hours before Four point and Fifty-
use and washing of sand, necessary scaffolding, curing at Zero Zero Two point
least for 7 days for all floors up to 4th floor including cost of One Four Two
water, electricity and other charges etc. all complete and Five
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M)

Rule pointing to brick wall with cement sand (F.M. 1.2) mortar
Two Eighty
PART-D-i : (1:2) with fresh cement and raking out the joints, curing at
Hundred Thousand
INTERNAL RCC least for 7 days, cost of water, electricity, scaffolding and
236 17 Sqm 400.000 201.001 and One 80400.400 Four
ROAD (CIVIL other charges etc. all complete in all respect as per drawing
point Zero Hundred
WORKS) and accepted by the Engineer-in-charge. (Cement: CEM-II/B-
Zero One point Four
M)

Eight Lakh
Flush pointing to brick wall with cement sand (F.M. 1.2)
Four Fourteen
PART-D-i : mortar (1:2) with cement including raking out the joints,
Hundred Thousand
INTERNAL RCC curing at least for 7 days, cost of water, electricity, scaffolding
237 18 Sqm 2025.000 402.001 and Two 814052.025 AND Fifty-
ROAD (CIVIL and other charges etc. all complete in all respect as per
point Zero Two point
WORKS) drawing and accepted by the Engineer-in-charge. (Cement:
Zero One Zero Two
CEM-II/B-M)
Five

Reeta wash of approved quality by reeta fruit; ceramic bricks

Nine Lakh
and fair-faced surface preparation including cleaning, drying,
Seventy-
making free from dirt, grease, wax, removing all chalked and
Four
scaled materials, fungus, mending good the surface defects Four
PART-D-i : Thousand
using sand paper and necessary scaffolding; applying 2 Hundred
INTERNAL RCC Eight
238 19 coats of reeta wash on exposed brick surface/fair face Sqm 2425.000 402.001 and Two 974852.425
ROAD (CIVIL Hundred
surface spreading by brush, 120 water paper, plastic brush, point Zero
WORKS) and Fifty-
marking cloths & necessary required materials etc. up to Zero One
Two point
desired finishing, elapsing specified time for drying or
Four Two
recoating; all complete in all floors and accepted by the
Five
Engineer-in-charge.

''Supplying, fitting and fixing country made GP(Gress

One Lakh
Porcellanto) - glazed or unglazed homogeneous floor tiles One
Ninety-Six
complying BDS ISO 13006: 2015, water absorption ≤ 0.5%, Thousand
Thousand
PART-D-i : modulus of rupture (MOR) ≥ 27 N/mm2, irrespective of color Four
One
INTERNAL RCC &/or design, with 20 mm thick cement sand (F.M. 1.2) mortar Hundred
239 20 Sqm 132.000 1486.001 196152.132 Hundred
ROAD (CIVIL (1:4) base and raking out the joints with white cement and
and Fifty-
WORKS) including cutting and laying the tiles in proper way and Eighty-Six
Two point
finishing with care etc. all complete and accepted by the point Zero
One Three
Engineer-in-charge. (Cement: CEM-II/B-M) Zero One
Two
GP (homogeneous) 400 mm x 400 mm floor tiles''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 26/80
3/11/24, 2:55 PM View Form
Two Lakh
Forty-
Three Eight
''Labour cost for making moulding in marble stone as per
Hundred Thousand
PART-D-i : architectural drawing including cutting, grinding, finishing,
and One
INTERNAL RCC supplying necessary equipment etc. complete in all respect
240 21 Rm 622.000 399.001 Ninety- 248178.622 Hundred
ROAD (CIVIL and accepted by the Engineer in Charge. (Cement: CEM-
Nine point and
WORKS) II/B-M)
Zero Zero Seventy-
12 mm thick marble stone''
One Eight point
Six Two
Two

''Pre-cast reinforced cement concrete block (block size - 24''''

x 12'''' x 4'''') works, with minimum cement content relates to
mix ratio 1:1.25:2.5 having maximum water cement ratio =
0.40 and minimum f?cr = 38.5 MPa, satisfying a specified
compressive strength f?c = 30 MPa at 28 days on standard
cylinders as per standard practice of Code ACl/ BNBC/
ASTM, Cement conforming to CEM-I/ B-M 42.5N (42.5MPa),
and adding approved high range water reducing admixture of Twenty-
complying specific type (generally be Type-G or F) under Three
ASTM-C 494, best quality coarse sand [Sylhet sand or Lakh
Eight
coarse sand of equivalent F.M. 2.2], 20 mm down well Forty-Nine
Hundred
PART-D-i : graded crushed stone chips conforming to ASTM C-33 Thousand
and
INTERNAL RCC (Aggregate grading as per table shown in technical Three
241 22 Each 2625.000 895.001 Ninety- 2349377.625
ROAD (CIVIL specification), including conducting necessary tests, Hundred
Five point
WORKS) screening sand through proper sieves, making and placing and
Zero Zero
shutter in position and maintaining true to plumb, making Seventy-
One
shutter water-tight properly, placing reinforcement in position; Seven
mixing with standard mixer machine and fed by standard point Six
measuring boxes, casting in forms, compacting by vibrator Two Five
machine and curing at least for 28 days, removing centering-
shuttering after specified time approved; including cost of
reinforcement and its fabrication, placing, binding, steel
shutter, water, electricity, other charges etc. all complete,
approved and accepted by the Engineer-in-charge. (Doses of
admixture to be fixed in consultation with design office)
(Rate is excluding laboratory test fees.)''

Supplying, laying, fitting & fixing best quality 300 mm dia Two One Lakh
(internal) machine made R.C.C. pipe over 100 mm thick Thousand Thirty-
PART-D-i : cement concrete (1:3:6) at base and sides including single Three Eight
INTERNAL RCC brick flat soling and gasket with cement mortar (1:4) joints, Hundred Thousand
242 23 Rm 60.000 2315.001 138900.060
ROAD (CIVIL cutting and filling trenches up to required depth including and Nine
WORKS) excavation of soil etc. all complete in all respect as per type Fifteen Hundred
plan and accepted by the Engineer-in-charge (average depth point Zero point Zero
of trench is 1050 mm). (Cement: CEM-II/B-M) Zero One Six

Supplying, laying, fitting and fixing best quality 900 mm dia

(internal) machine made R.C.C. pipe with socket over 100
mm thick cement concrete (1:3:6) at base and sides
PART-D-i : Twelve
including single layer brick flat soling , cutting and filling Six Lakh
INTERNAL RCC Thousand
243 24 trenches up to required depth including excavation of soil etc. Rm 50.000 12000.001 600000.050 point Zero
ROAD (CIVIL point Zero
complete in all respect as per type plan and accepted by the Five
WORKS) Zero One
Engineer-in-charge (Cement: CEM-II/B-M) . [Rate is
excluding cost of excavation, back-fill, materials for back-fill
and bedding]

Providing layout and carry over PWD bench-mark (BM) at

PART-E-i : site from nearby BM pillar, property lines, existing ground Sixty-Four
INTERNAL level (EGL), formation ground level (FGL), highest flood Thirty- Thousand
DRAINAGE, WALK levels (HFL), plinth levels (PL), mean sea level (MSL), setting Three AND
244 1 Sqm 1940.000 33.001 64021.940
WAY & UTILITY and marking all pillars, marker, pegs etc. showing and point Zero Twenty-
DUCT (CIVIL maintaining reduced levels (RL's) including locating, Zero One One point
WORKS) establishing, protecting all public utilities within the premise Nine Four
of work and finally all to be presented in black and white.

Mobilization and cleaning site before commencing actual

physical work and during contract period and demobilization
after completion of the works under contract to be accepted Four Lakh
by the Engineer-in-charge. This work shall also cover Twenty-
PART-E-i : cleaning and clearing, cutting or filling, dressing the project Two Two
INTERNAL area on and in the ground to an extent that all the events of Hundred Thousand
DRAINAGE, WALK works of the project can be executed smoothly in a working and Nine
245 2 Sqm 1940.000 218.001 422921.940
WAY & UTILITY environment with a particular attention on safety and security Eighteen Hundred
DUCT (CIVIL in all respects, and to stockpile the end outcome to a place point Zero and
WORKS) for disposal agreed by the Engineer-in-charge, where, Zero One Twenty-
payments are to be based on ground area determined by the One point
Engineer-in-charge and be proportionate to the percentage Nine Four
progress of work under contract as a whole in all respects
and approved by the Engineer-in-charge.

''Earth work in excavation in all kinds of soil for foundation

trenches including layout, providing center lines, local bench-
mark pillars, levelling, ramming and preparing the base,
fixing bamboo spikes and marking layout with chalk powder,
providing necessary tools and plants, protecting and Thirty-Six
PART-E-i :
maintaining the trench dry etc., stacking, cleaning the Thousand
INTERNAL
excavated earth at a safe distance out of the area enclosed Nineteen Eight
DRAINAGE, WALK
246 3.a by the layout etc. all complete and accepted by the Engineer- Sqm. 1940.000 19.001 point Zero 36861.940 Hundred
WAY & UTILITY
in-charge, subject to submit method statement of carrying out Zero One and Sixty-
DUCT (CIVIL
excavation work to the Engineer-in-charge for approval. One point
WORKS)
However, engineer's approval shall not relieve the contractor Nine Four
of his responsibilities and obligations under the contract.
a) Layout and marking for earthwork in excavation in
foundation accepted by the Engineer-in-charge. [Plinth area
of the structure shall be considered for measurement]''

247 PART-E-i : 3.b Earthwork in excavation in foundation trenches up to 1.5 m cum 2120.000 168.001 One 356162.120 Three
INTERNAL depth and maximum 10 m lead Hundred Lakh Fifty-
DRAINAGE, WALK and Sixty- Six
WAY & UTILITY Eight point Thousand
DUCT (CIVIL Zero Zero One
WORKS) One Hundred
and Sixty-

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 27/80
3/11/24, 2:55 PM View Form
Two point
One Two

One Thirty-Five
PART-E-i :
Hundred Thousand
INTERNAL
and Six
DRAINAGE, WALK Added rate for each additional 0.5 meter depth exceeding 1.5
248 3.c cum 180.000 198.001 Ninety- 35640.180 Hundred
WAY & UTILITY meter to 2.0 meter Depth
Eight point and Forty
DUCT (CIVIL
Zero Zero point One
WORKS)
One Eight

Thirty-
Four
PART-E-i : Three
Hundred
INTERNAL Thousand
and
DRAINAGE, WALK Bailing out of trapped water caused by inundation or rain, by One
249 4 hour 70.000 474.001 Seventy- 33180.070
WAY & UTILITY pump from foundation trenches. Hundred
Four point
DUCT (CIVIL and Eighty
Zero Zero
WORKS) point Zero
One
Seven

One Fifty-Four
Sand filling in foundation trenches and plinth with sand
PART-E-i : Thousand Thousand
having min. F.M. 1.2 in 150 mm in layers including leveling,
INTERNAL Two Four
watering and compaction to achieve minimum dry density of
DRAINAGE, WALK Hundred Hundred
250 5 95% with optimum moisture content (Modified proctor test) cum 42.000 1296.001 54432.042
WAY & UTILITY and and Thirty-
by ramming each layer up to finished level as per design
DUCT (CIVIL Ninety-Six Two point
supplied by the design office only, all complete and accepted
WORKS) point Zero Zero Four
by the Engineer-in-charge.
Zero One Two

One Lakh
Sixty-
Earth filling in foundation trenches and plinth in 150 mm layer
PART-E-i : Seven
with earth available within 90 m of the building site to achive Two
INTERNAL Thousand
minimum dry density of 95% with optimum moisture content Hundred
DRAINAGE, WALK Six
251 6 (Modified proctor test) including carrying watering, leveling, cum 810.000 207.001 and Seven 167670.810
WAY & UTILITY Hundred
dressing and compacting to a specified percentage each point Zero
DUCT (CIVIL and
layer up to finished level etc. all complete and accepted by Zero One
WORKS) Seventy
Engineer-in-charge.
point Eight
One

Seven
Lakh
Three
Compacted cement sand filling in foundation trenches and Thirty-
Thousand
PART-E-i : plinth with cement and coarse sand having min. F.M. 1.2 mix Four
One
INTERNAL ratio (1:15) in 150 mm in layers including leveling, watering Thousand
Hundred
DRAINAGE, WALK and compaction to achieve minimum dry density of 95% with Three
252 7 cum 235.000 3125.001 and 734375.235
WAY & UTILITY optimum moisture content (Modified proctor test) by ramming Hundred
Twenty-
DUCT (CIVIL each layer up to finished level as per design supplied by the and
Five point
WORKS) design office only etc. all complete and accepted by the Seventy-
Zero Zero
Engineer-in-charge. (Cement: CEM-II/B-M) Five point
One
Two Three
Five

Nine Lakh
Twenty-
PART-E-i : Six
Eight
INTERNAL One layer brick flat soling in foundation or in floor with first Hundred
Thousand
DRAINAGE, WALK class/picked jhama bricks (BDS 208) including preparation of and Thirty-
253 8 Sqm 1460.000 636.001 928561.460 Five
WAY & UTILITY bed and filling the interstices with local sand, leveling etc. Six point
Hundred
DUCT (CIVIL complete and accepted by the Engineer-in-charge. Zero Zero
and Sixty-
WORKS) One
One point
Four Six

''Providing brick works for 200 mm x 50 mm facing in

superstructure with 200 mm x 50 mm x 50 mm machine
Seventeen
made hard pressed klinker facing red or maroon strips of
Two Lakh
approved quality with 20 mm thick cement sand (F.M.1.2)
PART-E-i : Thousand Eighty-
mortar (1:4), 10 mm thick cement mortar in adjacent sides
INTERNAL Nine Nine
including racking out joints and cutting the bricks to required
DRAINAGE, WALK Hundred Thousand
254 9 sizes wherever necessary with high class recessed pointing, Sqm 610.000 2934.001 1789740.610
WAY & UTILITY and Thirty- Seven
cleaning and soaking the bricks for at least 24 hours before
DUCT (CIVIL Four point Hundred
use and washing of sand, necessary scaffolding, curing at
WORKS) Zero Zero and Forty
least for 7 days for all floors up to 4th floor including cost of
One point Six
water, electricity and other charges etc. all complete and
One
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M)
i) Ground floor''

One Lakh
Twenty-
PART-E-i : Flush pointing to brick wall with cement sand (F.M. 1.2)
Two Two
INTERNAL mortar (1:2) with cement including raking out the joints,
Hundred Thousand
DRAINAGE, WALK curing at least for 7 days, cost of water, electricity, scaffolding
255 10 Sqm 610.000 201.001 and One 122610.610 Six
WAY & UTILITY and other charges etc. all complete in all respect as per
point Zero Hundred
DUCT (CIVIL drawing and accepted by the Engineer-in-charge. (Cement:
Zero One and Ten
WORKS) CEM-II/B-M)
point Six
One

Reeta wash of approved quality by reeta fruit; ceramic bricks

and fair-faced surface preparation including cleaning, drying, Two Lakh
making free from dirt, grease, wax, removing all chalked and Forty-Five
PART-E-i :
scaled materials, fungus, mending good the surface defects Four Thousand
INTERNAL
using sand paper and necessary scaffolding; applying 2 Hundred Two
DRAINAGE, WALK
256 11 coats of reeta wash on exposed brick surface/fair face Sqm 610.000 402.001 and Two 245220.610 Hundred
WAY & UTILITY
surface spreading by brush, 120 water paper, plastic brush, point Zero and
DUCT (CIVIL
marking cloths & necessary required materials etc. up to Zero One Twenty
WORKS)
desired finishing, elapsing specified time for drying or point Six
recoating; all complete in all floors and accepted by the One
Engineer-in-charge.

125 mm brick works with first class bricks with cement sand Six Lakh
One
PART-E-i : (F.M. 1.2) mortar (1:4) and making bond with connected walls Five
Thousand
INTERNAL including necessary scaffolding, raking out joints, cleaning Thousand
Four
DRAINAGE, WALK and soaking the bricks for at least 24 hours before use and Four
257 12 Sqm 430.000 1408.001 Hundred 605440.430
WAY & UTILITY washing of sand, curing at least for 7 days in all floors Hundred
and Eight
DUCT (CIVIL including cost of water, electricity and other charges etc. all and Forty
point Zero
WORKS) complete and accepted by the Engineer-in-charge. (Cement: point Four
Zero One
CEM-II/B-M) Three

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 28/80
3/11/24, 2:55 PM View Form
''Reinforced cement concrete works with minimum cement
content relates to mix ratio 1:1.5:3 having maximum water
cement ratio = 0.40 and minimum f'cr = 33.5 MPa, satisfying
a specified compressive strength f?c = 25 MPa at 28 days on
standard cylinders as per standard practice of Code
ACI/BNBC/ASTM, Cement conforming to BDS EN-197-1-
CEM-I, 52.5N (52.5 MPa) / ASTM-C 150 Type ? I, best
quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and
20 mm down well graded stone chips conforming to ASTM C-
PART-E-i : 33 (Aggregate grading as per table shown in technical Thirty-
INTERNAL specification), conducting necessary tests, making and Twenty Three
DRAINAGE, WALK placing shutter in position and maintaining true to plumb, Thousand Lakh Forty
258 13.(a-1) Cum 167.000 20000.001 3340000.167
WAY & UTILITY making shutter water-tight properly, placing reinforcement in point Zero Thousand
DUCT (CIVIL position; mixing with standard mixer machine with hopper, Zero One point One
WORKS) fed by standard measuring boxes, casting in forms, Six Seven
compacting by vibrator machine and curing at least for 28
days, removing centering-shuttering after specified time
approved; including cost of water, electricity, other charges
etc. all complete, approved and accepted by the Engineer-in-
charge. (Rate is excluding laboratory test fees, the cost of
reinforcement and its fabrication, placing, binding etc. and
the cost of shuttering & centering)
a) Drain Base/ Footing
1) Casting''

One Lakh
''2) FORM WORK (Steel) Centering and shuttering, including Five
PART-E-i : Thirty
strutting, propping etc. (The formwork must be rigid enough Hundred
INTERNAL Thousand
both in and out of plane, to make the concrete surface true to and
DRAINAGE, WALK Nine
259 13.(a-2) the designed shape and size by using necessary MS sheets Sqm 225.000 582.001 Eighty- 130950.225
WAY & UTILITY Hundred
of minimum 16 BWG, angles of minimum size 40 mm x 40 Two point
DUCT (CIVIL and Fifty
mm x 5 mm, flat bars etc.) and removal of form for: Zero Zero
WORKS) point Two
Drain Base/ Footing '' One
Two Five

Fifty-Two
PART-E-i : Nineteen Lakh
INTERNAL Thousand Forty-Five
DRAINAGE, WALK ''Drain Wall/ RCC Wall Five Thousand
260 13.(b-1) Cum 269.000 19500.001 5245500.269
WAY & UTILITY 1) Casting '' Hundred Five
DUCT (CIVIL point Zero Hundred
WORKS) Zero One point Two
Six Nine

Twenty-
Six Lakh
Five
PART-E-i : Fifteen
Hundred
INTERNAL Thousand
and
DRAINAGE, WALK ''2) Form Work/Shuttering (steel) Two
261 13.(b-2) Sqm 5010.000 522.001 Twenty- 2615225.010
WAY & UTILITY '' Hundred
Two point
DUCT (CIVIL and
Zero Zero
WORKS) Twenty-
One
Five point
Zero One

PART-E-i :
Seven
INTERNAL Nineteen
Lakh Sixty
DRAINAGE, WALK ''PL level Slab Thousand
262 13.(c-1) Cum 40.000 19000.001 760000.040 Thousand
WAY & UTILITY 1) Casting '' point Zero
point Zero
DUCT (CIVIL Zero One
Four
WORKS)

Eighteen
Five Thousand
PART-E-i :
Hundred Seven
INTERNAL
and Hundred
DRAINAGE, WALK
263 13.(c-2) 2) Form Work/ Shuttering (steel) Sqm 32.000 587.001 Eighty- 18784.032 and
WAY & UTILITY
Seven Eighty-
DUCT (CIVIL
point Zero Four point
WORKS)
Zero One Zero
Three Two

Fifteen
PART-E-i : Lakh
INTERNAL Nineteen Seventy-
DRAINAGE, WALK ''Drain Top Slab Thousand Seven
264 13.(d-1) Cum 83.000 19000.001 1577000.083
WAY & UTILITY 1) Casting '' point Zero Thousand
DUCT (CIVIL Zero One point Zero
WORKS) Eight
Three

Five Lakh
Five Forty-Six
PART-E-i :
Hundred Thousand
INTERNAL
and Two
DRAINAGE, WALK
265 13.(d-2) 2) Form Work/ Shuttering (steel) Sqm 915.000 597.001 Ninety- 546255.915 Hundred
WAY & UTILITY
Seven and Fifty-
DUCT (CIVIL
point Zero Five point
WORKS)
Zero One Nine One
Five

Testing work of concrete cylinder [From BUET (BRTC), Four

KUET (CRTS), RUET (DCE), SUST (CRTC) & DUET (DCE)] Thousand Nine
PART-E-i :
size 150mm dia and 300mm hight for testing compressive Eight Thousand
INTERNAL
strength in the laboratory approved by the Engineer including Hundred Seven
DRAINAGE, WALK
266 14 making cylinder using steel mould, curing the cylinder to the Set 2.000 4875.001 and 9750.002 Hundred
WAY & UTILITY
laboratory payment of the testing fees etc. complete as per Seventy- and Fifty
DUCT (CIVIL
direction of the Engineer in charge. (Payment should be Five point point Zero
WORKS)
made for the cylinders tested whoes strenght attain the Zero Zero Zero Two
specified strength of the concrete.) One

267 PART-E-i : 15 ''Supplying, fabrication and fixing to detail as per design : Ton 48.000 122000.001 One Lakh 5856000.048 Fifty-Eight
INTERNAL ribbed or deformed bar reinforcement (excluding laboratory Twenty- Lakh Fifty-
DRAINAGE, WALK test fees) for Reinforced concrete, produced and marked in Two Six
WAY & UTILITY accordance with BDS ISO 6935-2:2016 (or standard Thousand Thousand
DUCT (CIVIL subsequently released from BSTI) including straightening point Zero point Zero
WORKS) and cleaning rust, if any, bending and binding in position with Zero One Four Eight
supply of G.I. wires,conducting necessary laboratory tests

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 29/80
3/11/24, 2:55 PM View Form
etc. (excluding splices or laps) complete in all respect and
accepted by the Engineer-in-charge (Measurement shall be
recorded only on standard mass per unit length of bars, while
dia of bars exceeds its standard)
Grade 400 (B400DWR / B420DWR: complying BDS ISO
6935-2:2016 / ASTM A615) ribbed or deformed bar produced
and marked according to Bangladesh standard, with
minimum yield strength, fy (ReH)= 400 MPa but fy not
exceeding 480 MPa and whatever is the actual yield strength
within allowable limit as per BNBC/ ACI 318, the ratio of
ultimate tensile strength fu to yield strength fy, shall be at
least 1.25 and minimum elongation after fracture and
minimum total elongation at maximum force is 17% and 8%
respectively: a) Ground floor''

Seven
Lakh
Minimum 12 mm thick cement sand (F.M. 1.2) plaster with Three
PART-E-i : Seventy-
neat cement finishing to plinth wall with cement (1:4) up to Hundred
INTERNAL Seven
150 mm below ground level including washing of sand, and
DRAINAGE, WALK Thousand
268 16 finishing the edges and corners and curing at least for 7 sqm 2040.000 381.001 Eighty- 777242.040
WAY & UTILITY Two
days, cost of water, electricity, scaffolding and other charges One point
DUCT (CIVIL Hundred
etc. all complete in all respect as per drawing and accepted Zero Zero
WORKS) and Forty-
by the Engineer-in-charge. (Cement: CEM-II/B-M) One
Two point
Zero Four

Supply, fabrication and installation of hot rolled structural One Three

PART-E-i :
grade steel channel and angle in roof truss or any form of Hundred Lakh
INTERNAL
structure of any thickness conforming to ASTM A36 with a and Eighty-
DRAINAGE, WALK
269 17 minimum yield strength of 250 MPa, including the cost of Kg 3000.000 129.001 Twenty- 387003.000 Seven
WAY & UTILITY
testing, application of red/grey-oxide primer etc. (up to level- Nine point Thousand
DUCT (CIVIL
4) all complete as per drawing, specification and direction of Zero Zero AND
WORKS)
Engineer-in-charge. One Three

Standard synthetic enamel paint of approved best quality and

Seventy-
colour delivered from authorized local agent of the
Two Three
PART-E-i : manufacturer in a sealed container, having high water
Hundred Thousand
INTERNAL resistance, high bondibility, flexibility property; using specified
and Seven
DRAINAGE, WALK brand thinner applying to metallic or wooden surface by
270 18 Sqm 322.000 229.001 Twenty- 73738.322 Hundred
WAY & UTILITY brass/roller/spray in 2 coats over single coat anti-corrosive
Nine point and Thirty-
DUCT (CIVIL coating including cleaning, drying, making free from dirt,
Zero Zero Eight point
WORKS) grease, wax, removing all chalked and scaled materials, all
One Three Two
complete in all floors and accepted by the Engineer-in-
Two
charge.

''Surface drain of 300 mm clear width and depth up to 300

mm: Eight Lakh
Constructing RCC (fc'=22MPa, minimum fcr=27MPa in Three Twenty-
nominal mix1:2:4 with stone chips) surface drain of 300 mm Thousand One
PART-E-i :
clear width and depth up to 300 mm with 125 mm thick check Four Thousand
INTERNAL
walls and 125 mm thick base over one layer of brick flat Hundred Three
DRAINAGE, WALK
271 19 soling. The surface having minimum 12 mm thick cement Rm 235.000 3495.001 and 821325.235 Hundred
WAY & UTILITY
sand (F.M. 1.2) plaster (1:3) and neat cement finishing with Ninety- and
DUCT (CIVIL
cement curing at least for 7 days including excavation in all Five point Twenty-
WORKS)
kinds of soil, back filling with fine sand (F.M. 0.8), Zero Zero Five point
consolidating and dressing, cost of water, electricity, other One Two Three
charges etc. complete and accepted by the Engineer in Five
charge. (Cement: CEM-II/A-M)''

''Surface drain of 225 mm clear width and 600 mm (av.)

depth :
Constructing RCC(fc'=22MPa, minimum fcr=27MPa in
nominal mix1:2:4 with stone chips) surface drain of 600 mm Fourteen
Six
(av.) depth and 225 mm clear width at the bottom and 525 Lakh
Thousand
PART-E-i : mm at the top, having 125 mm thick check walls maintaining Ninety-
One
INTERNAL side slopes and 125 mm thick base over one layer of Nine
Hundred
DRAINAGE, WALK polythene on top of brick flat soling. The surface having Thousand
272 20 Rm 245.000 6122.001 and 1499890.245
WAY & UTILITY minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:3) Eight
Twenty-
DUCT (CIVIL including neat cement finishing the surfaces and back of the Hundred
Two point
WORKS) drain up to 150 mm below ground level with fresh cement and Ninety
Zero Zero
(conforming to BDS 232) curing at least for 7 days, including point Two
One
excavation of all kinds of soil, back filling with fine sand (F.M. Four Five
0.8) consolidating and dressing, including cost of water,
electricity, other charges etc. complete and accepted by the
Engineer in charge. (Cement: CEM-II/A-M)''

Two Nine Lakh

PART-E-ii :
''Supplying and laying uPVC pipe for underground including Thousand Forty-Six
INTERNAL
fitting, fixing etc. all complete approved and accepted by the One Thousand
DRAINAGE, WALK
273 1 Engineer- in- charge. Rm 450.000 2104.001 Hundred 946800.450 Eight
WAY & UTILITY
200 mm dia with wall thickness 5.3 mm - 7.8 mm uPVC pipe and Four Hundred
DUCT (SANITARY
'' point Zero point Four
WORKS)
Zero One Five

Supplying, laying, fitting & fixing best quality 300 mm dia Two
Sixty-Nine
PART-E-ii : (internal) machine made R.C.C. pipe over 100 mm thick Thousand
Thousand
INTERNAL cement concrete (1:3:6) at base and sides including single Three
Four
DRAINAGE, WALK brick flat soling and gasket with cement mortar (1:4) joints, Hundred
274 2 Rm 30.000 2315.001 69450.030 Hundred
WAY & UTILITY cutting and filling trenches up to required depth including and
and Fifty
DUCT (SANITARY excavation of soil etc. all complete in all respect as per type Fifteen
point Zero
WORKS) plan and accepted by the Engineer-in-charge (average depth point Zero
Three
of trench is 1050 mm).(Cement: CEM-II/B-M) Zero One

Seventy-
Supplying, laying, fitting and fixing best quality 900 mm dia Eleven
One
(internal) machine made R.C.C. pipe with socket over 100 Thousand
PART-E-ii : Thousand
mm thick cement concrete (1:3:6) at base and sides Nine
INTERNAL Eight
including single layer brick flat soling , cutting and filling Hundred
DRAINAGE, WALK Hundred
275 3 trenches up to required depth including excavation of soil etc. Rm 6.000 11979.001 and 71874.006
WAY & UTILITY and
complete in all respect as per type plan and accepted by the Seventy-
DUCT (SANITARY Seventy-
Engineer-in-charge (Cement: CEM-II/B-M) . [Rate is Nine point
WORKS) Four point
excluding cost of excavation, back-fill, materials for back-fill Zero Zero
Zero Zero
and bedding] One
Six

276 PART-E-ii : 4 ''Construction of non electric Eco STP of different sizes (as Each 1.000 683652.001 Six Lakh 683652.001 Six Lakh
INTERNAL per detail drawing attached in annexure) with 250 mm walls Eighty- Eighty-
DRAINAGE, WALK of brick work in cement mortar (1:4) having a brick flat soling Three Three
WAY & UTILITY and 125 mm thick reinforced cement concrete flooring (1:2:4) Thousand Thousand

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 30/80
3/11/24, 2:55 PM View Form
DUCT (SANITARY with 125 mm thick walls (1:4) in partition and flush pointing Six Six
WORKS) (1:2) on inside wall surface and 12 mm thick cement plaster Hundred Hundred
(1:4) with N.C.F. on floor and slab surface including and Fifty- and Fifty-
supplying, fitting and fixing of upvc pipes & Tees and Two point Two point
providing 450 mm dia water sealed heavy type C.I. manhole Zero Zero Zero Zero
cover with locking/unlocking arrangement and 100 mm thick One One
R.C.C (1:2:4) top slab, including centering, shuttering,
fabricating, casting and curing etc. complete up to required
depth including necessary earth work in excavation and
shoring, bailing out water and side filling, dressing, inside
cleaning, cow dung or old septic tank liquied for
charging/start up including the cost of all materials,
operations and incidental charges. etc. all complete as per
type plan approved and accepted by the Engineer-in-charge
(Rate is including cost of reinforcement and its fabrication,
binding and placing).
For 500 users''

''Construction of masonry inspection pit with 250 mm thick Four

Nine
brick work in cement mortar (1:4) including necessary earth Thousand
PART-E-ii : Thousand
work, side filling and one layer brick flat soling, 75 mm thick Six
INTERNAL Three
(1:3:6) base concrete for making invert channel and 12 mm Hundred
DRAINAGE, WALK Hundred
277 5 thick (1:2) cement plaster with neat finishing etc. all complete Each 2.000 4683.001 and 9366.002
WAY & UTILITY and Sixty-
up to a depth of 700 mm approved and accepted by the Eighty-
DUCT (SANITARY Six point
Engineer- in- charge. Three
WORKS) Zero Zero
Master-pit of Size: Clear 600 mm x 500 mm and average 750 point Zero
Two
mm depth for Septic tank.'' Zero One

''Construction of masonry inspection pits up to a depth of 700

mm with 250 mm thick brick work in cement mortar (1:4) Three
including 100 mm thick R.C.C. top slab (1:2:4) with 1% Lakh
Twelve
reinforcement, man-hole cover with locking arrangement Seventy-
PART-E-ii : Thousand
including necessary earth work, side filling and one brick flat Six
INTERNAL Five
soling. 75 mm thick (1:3:6) base concrete for making invert Thousand
DRAINAGE, WALK Hundred
278 6 channel and 12 mm thick (1:2) cement plaster with neat Each 30.000 12554.001 376620.030 Six
WAY & UTILITY and Fifty-
finishing etc. all complete approved and accepted by the Hundred
DUCT (SANITARY Four point
Engineer- in- charge. and
WORKS) Zero Zero
a) Clear 600 mm x 600 mm and depth 750 mm to 900 mm, Twenty
One
average 825 mm for single 300 mm dia R.C.C. pipes and point Zero
375 mm and 400 mm PVC pipe with pit cover and 450 mm Three
dia C.I. man-hole cover.''

Labour charge for scraping lawn surface up to 38 mm depth Sixty-One

PART-F-i : LAND
by spade, picking up all sorts of brick bats, rubbish by Thousand
SCAPING & Twelve
suitable tools, removing the same by head load or by any Two
279 PLANTATION 1 Sqm 5100.000 12.001 point Zero 61205.100
other means and stacking the same to a safe distance Hundred
(ARBORICULTURE Zero One
beyond 300 m including supply of tools and plants etc. all and Five
WORKS)
complete and accepted by the Engineer-in-charge. point One

Preparation of ground to make ready for plantation by One Lakh

spading the ground to a depth of 150 mm to 230 mm beyond Twenty-
PART-F-i : LAND
38 mm deep scrapped ground by spade, breaking earth Twenty- Two
SCAPING &
clods to powder by hammers, picking up all sorts of rubbish, Four point Thousand
280 PLANTATION 2 Sqm 5100.000 24.001 122405.100
unwanted grasses by suitable tools, carrying and spreading Zero Zero Four
(ARBORICULTURE
the surplus earth into low lying area including supply of tools One Hundred
WORKS)
and plants etc. all complete and accepted by the Engineer-in- and Five
charge. point One

Forty
PART-F-i : LAND
Leveling and dressing of lawn area to proper slope and Thousand
SCAPING & Eight point
grade by spading the same including supplying tools and Eight
281 PLANTATION 3 Sqm 5100.000 8.001 Zero Zero 40805.100
plants etc. all complete and accepted by the Engineer-in- Hundred
(ARBORICULTURE One
charge. and Five
WORKS)
point One

One Lakh
Thirty-Two
Nine Thousand
PART-F-i : LAND
Supply of best and approved quality alluvial loamy silty soil Hundred Three
SCAPING &
including loading, unloading at both ends, properly stacking and Hundred
282 PLANTATION 4 Cum 145.000 913.001 132385.145
at site including supply of tools and plants etc. all complete Thirteen and
(ARBORICULTURE
and accepted by the Engineer-in-charge. point Zero Eighty-
WORKS)
Zero One Five point
One Four
Five

Twenty-
One
Eight
PART-F-i : LAND Hundred
Labour charge for spreading the alluvial loamy silty soil from Thousand
SCAPING & and
the stacks at site on the lawn surface, leveling, dressing the One
283 PLANTATION 5 Cum 145.000 194.001 Ninety- 28130.145
same including supply all necessary tools and plants etc. all Hundred
(ARBORICULTURE Four point
complete and accepted by the Engineer-in-charge. and Thirty
WORKS) Zero Zero
point One
One
Four Five

Supply of lawn grass of approved quality by truck or by any

Three
other means, sorting the grass to proper size, washing the
Lakh
PART-F-i : LAND grass, dibbling the grass 6 mm to 50 mm apart, irrigation of
Sixty- Forty-One
SCAPING & lawn area till the grass grown at least for two months after
Seven Thousand
284 PLANTATION 6 plantation, weeding the undesirable grass, mowing the lawn Sqm 5100.000 67.001 341705.100
point Zero Seven
(ARBORICULTURE grass by lawn mower up to two months after plantation,
Zero One Hundred
WORKS) applying urea fertilizer on the lawn surface @ 1 kg per 9.29
and Five
sqm including supply of tools and plants etc. all complete and
point One
accepted by the Engineer-in-charge.

Two Lakh
Spading for preparation of flower beds in pits up to 600 mm
Five Forty-Nine
PART-F-i : LAND depth, re-molding, picking up and placing and removing the
Hundred Thousand
SCAPING & spaded earth to a safe distance, mixing @ 1 cft well
and Sixty- Four
285 PLANTATION 7 decomposed cow dung with 20% loamy silty soil and 6 cft Sqm 440.000 567.001 249480.440
Seven Hundred
(ARBORICULTURE excavated soil and fill back the pit including supply of tools
point Zero and Eighty
WORKS) and plants, all complete and accepted by the Engineer-in-
Zero One point Four
charge.
Four

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 31/80
3/11/24, 2:55 PM View Form
One Lakh
Seventy-
Forty-Four
Two
Thousand
PART-F-i : LAND Thousand
Supply and carrying of 6.5 h.p., 550 mm blade 4 stroke, Eight
SCAPING & Four
finger trip 3 position height adjuster 200 mm x 38 mm star Hundred
286 PLANTATION 8 Each 2.000 72447.001 Hundred 144894.002
tread wheels grass cutting (Power Lawn Mower Machine): and
(ARBORICULTURE and Forty-
YARDMAN No. 060A Ninety-
WORKS) Seven
Four point
point Zero
Zero Zero
Zero One
Two

Supply and planting of local bermuda grass of approved

Seventeen
quality by truck or by any other means, sorting the grass to One
Lakh
PART-F-i : LAND proper size, washing the grass, old grass cleaning, leveling & Thousand
Eighty-
SCAPING & dressing, viti sand filling, filtering system making, supplying Six
Two
287 PLANTATION 9 4?? bricks bats & 1.5 mm thick geo textile, first layer sylhet Sqm 1080.000 1650.001 Hundred 1782001.080
Thousand
(ARBORICULTURE sand & second layer filling by mixed sand (70% viti and 30% and Fifty
AND One
WORKS) Sylhet sand). In top surface leveling & dressing by roller then point Zero
point Zero
planting grass. Including supply of all tools and plants etc. all Zero One
Eight
complete and accepted by the Engineer-in-charge.

Two
PART-F-i : LAND Thousand
SCAPING & Plantation of Wedelia in campus by preparing bed with Eighteen One
288 PLANTATION 10 decomposed cow dung, providing suport etc. all complete Each 120.000 18.001 point Zero 2160.120 Hundred
(ARBORICULTURE and accepted by the Engineer-in-charge. Zero One and Sixty
WORKS) point One
Two

PART-F-i : LAND Nine

Ninety-
SCAPING & Plantation of Heliconia/ Kolaboti in campus by preparing bed Thousand
Two point
289 PLANTATION 11 with decomposed cow dung, providing suport etc. all Each 100.000 92.001 9200.100 Two
Zero Zero
(ARBORICULTURE complete and accepted by the Engineer-in-charge. Hundred
One
WORKS) point One

One
Thousand One Lakh
PART-F-i : LAND Two Twenty-
Plantation of Udal & Rain Tree (height of 6 rft to 8 rft), Palash
SCAPING & Hundred Two
& Kanakchura Tree (height of 5 rft to 7 rft) in campus by
290 PLANTATION 12 Each 100.000 1227.001 and 122700.100 Thousand
preparing bed with decomposed cow dung, providing suport
(ARBORICULTURE Twenty- Seven
etc. all complete and accepted by the Engineer-in-charge.
WORKS) Seven Hundred
point Zero point One
Zero One

One Ninety-
Thousand Eight
PART-F-i : LAND
Plantation of Pink Cassia (height of 6 rft to 8 rft) in campus Nine Thousand
SCAPING &
by preparing bed with decomposed cow dung, providing Hundred One
291 PLANTATION 13 Each 50.000 1963.001 98150.050
suport etc. all complete and accepted by the Engineer-in- and Sixty- Hundred
(ARBORICULTURE
charge. Three and Fifty
WORKS)
point Zero point Zero
Zero One Five

One
One Lakh
Thousand
PART-F-i : LAND Seventy-
Plantation of Krishnachura tree (height of 7 rft to 10 rft), Seven
SCAPING & One
Asian Palmyra Plam (height of 4 rft to 6 rft) in campus by Hundred
292 PLANTATION 14 Each 100.000 1718.001 171800.100 Thousand
preparing bed with decomposed cow dung, providing suport and
(ARBORICULTURE Eight
etc. all complete and accepted by the Engineer-in-charge. Eighteen
WORKS) Hundred
point Zero
point One
Zero One

One
Plantation of Shimul tree, Radhaachura (height of 5 rft to 7 Thousand One Lakh
PART-F-i : LAND rft), Sofeda tree (height of 4 rft to 6 rft), Kath Badam tree, Two Twenty-
SCAPING & Sonalu, Kadam tree, Chatim tree (height of 6 rft to 8 rft), Hundred Two
293 PLANTATION 15 Sofeda tree, Banana tree (height of 4 rft to 6 rft) in campus Each 100.000 1227.001 and 122700.100 Thousand
(ARBORICULTURE by preparing bed with decomposed cow dung, providing Twenty- Seven
WORKS) suport etc. all complete and accepted by the Engineer-in- Seven Hundred
charge. point Zero point One
Zero One

One
Thousand Eighty
PART-F-i : LAND Four Thousand
SCAPING & Plantation of Mango tree (height of 6 rft to 8 rft) in campus by Hundred Nine
294 PLANTATION 16 preparing bed with decomposed cow dung, providing suport Each 55.000 1472.001 and 80960.055 Hundred
(ARBORICULTURE etc. all complete and accepted by the Engineer-in-charge. Seventy- and Sixty
WORKS) Two point point Zero
Zero Zero Five Five
One

Sixty
One
Thousand
PART-F-i : LAND Thousand
Plantation of Kamranga tree (height of 4 rft to 6 rft), Bakul Seven
SCAPING & One
tree (height of 6 rft to 8 rft) in campus by preparing bed with Hundred
295 PLANTATION 17 Each 55.000 1104.001 Hundred 60720.055
decomposed cow dung, providing suport etc. all complete and
(ARBORICULTURE and Four
and accepted by the Engineer-in-charge. Twenty
WORKS) point Zero
point Zero
Zero One
Five Five

Nine
PART-F-i : LAND Hundred Fifty-Four
SCAPING & Plantation of Neem tree (height of 6 rft to 8 rft) in campus by and Thousand
296 PLANTATION 18 preparing bed with decomposed cow dung, providing suport Each 55.000 982.001 Eighty- 54010.055 AND Ten
(ARBORICULTURE etc. all complete and accepted by the Engineer-in-charge. Two point point Zero
WORKS) Zero Zero Five Five
One

Eighteen
Three
PART-F-i : LAND Thousand
Hundred
SCAPING & Plantation of Hasna Hena in campus by preparing bed with Two
and Thirty-
297 PLANTATION 19 decomposed cow dung, providing suport etc. all complete Each 55.000 331.001 18205.055 Hundred
One point
(ARBORICULTURE and accepted by the Engineer-in-charge. and Five
Zero Zero
WORKS) point Zero
One
Five Five

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 32/80
3/11/24, 2:55 PM View Form
Eighty-
Two
Eight
PART-F-i : LAND Thousand
Plantation of Coconut tree (height of 6 rft to 8 rft) in campus Thousand
SCAPING & Two
by preparing bed with decomposed cow dung, providing Three
298 PLANTATION 20 Each 40.000 2209.001 Hundred 88360.040
suport etc. all complete and accepted by the Engineer-in- Hundred
(ARBORICULTURE and Nine
charge. and Sixty
WORKS) point Zero
point Zero
Zero One
Four

Seventy-
One
Eight
Thousand
PART-F-i : LAND Thousand
Nine
SCAPING & Plantation of Kat Golap (height of 8 rft to 10 rft) in campus by Five
Hundred
299 PLANTATION 21 preparing bed with decomposed cow dung, providing suport Each 40.000 1963.001 78520.040 Hundred
and Sixty-
(ARBORICULTURE etc. all complete and accepted by the Engineer-in-charge. and
Three
WORKS) Twenty
point Zero
point Zero
Zero One
Four

''Concealed conduit point wiring (BYM) (without switch):

Concealed conduit wiring for following point looping at the
switch board with earth terminal with 1C-2x1.5 sqmm PVC
insulated and sheathed stranded cable (BYM) & same size
PVC insulated ECC (BYA) (Green / White color) including
circuit wiring with IC-2x2.5 sqmm PVC insulated and
sheathed stranded cable (BYM) & same size PVC insulated
ECC (BYA) Green / White color through PVC conduit (one
conduit from switch board to common point on ceiling is
One Seventy-
considered to draw 3 pair of cable ) of reputed manufacturer
Thousand Five
PART-F-ii : LAND of minimum 25 mm dia & 1.5 mm wall thickness complete
Two Thousand
SCAPING & with 18 SWG GP sheet / PVC switch board & pull box with
Hundred Six
300 PLANTATION 1 3mm thick ebonite sheet cover, without switch, fixing point 60.000 1261.001 75660.060
and Sixty- Hundred
(ELECTRICAL materials etc.(without switch) as required including mending
One point and Sixty
WORKS) the damages good. All electrical contacts shall be of brass /
Zero Zero point Zero
copper connected through connector or soldering (no twisting
One Six
shall be allowed) and cables shall be manufactured and
tested according to relevant IEC / BDS / BS / VDE standards
and as per detailed specification mentioned in Annexure-1.
The work shall be carried out as per direction & approval of
the Engineer.
Cable manufacturer(s) must have valid test certificate (within
last seven years ) from internationally accrediated laboratory
(like CPRI, KEMA etc) accepted / approved by the Engineer.
1.1) Light/ exhaust or wall bracket fan point''

''Concealed wiring (BYM): Concealed conduit wiring with

following PVC insulated and sheathed stranded cable (BYM)
& PVC insulated Green / White coloured ECC wire (BYA)
through PVC conduit of reputed manufacturer complete with
18 SWG GP sheet and pull box with 3mm thick ebonite sheet
cover, fixing materials etc. as required including mending the
damages good. All electrical contacts shall be of brass /
Two
PART-F-ii : LAND copper connected through connector or soldering ( no
Hundred Two Lakh
SCAPING & twisting shall be allowed) and cables shall be manufactured
and Sixty- Sixty-One
301 PLANTATION 2 and tested according to relevant IEC / BDS / BS / VDE Rm 1000.000 261.001 261001.000
One point Thousand
(ELECTRICAL standards and as per detailed specification mentioned in
Zero Zero AND One
WORKS) Annexure-1. The work shall be carried out as per direction &
One
approval of the Engineer.
Cable manufacturer(s) must have valid test certificate (within
last seven years) from internationally accrediated laboratory
(like CPRI, KEMA etc) accepted / approved by the Engineer.
2.1) 1C-2x2.5sqmm (BYM) cable with 2.5sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 16 mm having
wall thickness of 1.5 mm''

''Concealed wiring (NYY) (through PVC conduit): Concealed

conduit wiring with the following PVC insulated and sheathed
stranded cable (NYY) / XLPE insulated and PVC sheathed
stranded cable (2XY) & PVC insulated Green / Yellow bi-
colour ECC wire (BYA) through PVC conduit of reputed
manufacturer complete with fixing materials other
accessories etc. as required including mending the damages
Five
good. All electrical contacts shall be of brass / copper One Lakh
PART-F-ii : LAND Hundred
connected through connector or soldering (no twisting shall Five
SCAPING & and
be allowed) and cables shall be manufactured and tested Thousand
302 PLANTATION 3.1 Rm 200.000 528.001 Twenty- 105600.200
according to IEC / BS / VDE standards along with relevant Six
(ELECTRICAL Eight point
BDS standard as per detailed specification mentioned in Hundred
WORKS) Zero Zero
Annexure-1. The work shall be carried out as per direction & point Two
One
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge.
3.1) 1C-4x2.5 sqmm (NYY / 2XY) with 2.5 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 30 mm having
wall thickness of 1.9 mm.''

Six
PART-F-ii : LAND Sixty-Six
Hundred
SCAPING & 1C-4x4 sqmm (NYY / 2XY) with 4 sqmm (BYA) ECC wire Thousand
and Sixty-
303 PLANTATION 3.2 through PVC pipe of minimum inner dia 30 mm having wall Rm 100.000 667.001 66700.100 Seven
Seven
(ELECTRICAL thickness of 1.9 mm Hundred
point Zero
WORKS) point One
Zero One

304 PART-F-ii : LAND 4.1 ''SURFACE WIRING (BYM) (THROUGH PVC CONDUIT): Rm 200.000 192.001 One 38400.200 Thirty-
SCAPING & Surface conduit wiring with the following PVC insulated and Hundred Eight
PLANTATION sheathed cable (BYM) & Green / Yellow bi-colour PVC and Thousand
(ELECTRICAL insulated ECC wire (BYA) through PVC conduit of reputed Ninety- Four
WORKS) manufacturer complete with 18 SWG GP sheet pull box with Two point Hundred
3 mm thick ebonite sheet cover, fixing materials, other Zero Zero point Two
accessories etc. as required including mending the damages One
good. All electrical contacts shall be of brass / copper
connected through connector or soldering (no twisting shall
be allowed) and cables shall be manufactured and tested
according to IEC / BS / VDE standards along with relevant,
BDS standard as per detailed specification mentioned in
Annexure-1. The work shall be carried out as per direction &

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 33/80
3/11/24, 2:55 PM View Form
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge.
4.1) 1C-2x1.5 sqmm (BYM) cable with 1.5 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 20 mm having
wall thickness of 1.5 mm''

Two Twenty-
PART-F-ii : LAND
Hundred Six
SCAPING & 1C-2x2.5sqmm (BYM) cable with 2.5 sqmm (BYA) ECC wire
and Sixty- Thousand
305 PLANTATION 4.2 through PVC pipe of minimum inner dia 25 mm having wall Rm 100.000 261.001 26100.100
One point One
(ELECTRICAL thickness of 1.7 mm
Zero Zero Hundred
WORKS)
One point One

''SURFACE WIRING (NYY) (THROUGH PVC CONDUIT) :

Surface conduit wiring with the following PVC insulated and
sheathed stranded cable (NYY) / XLPE insulated and PVC
sheathed stranded cable (2XY) & PVC insulated Green /
Yellow bi-colour , ECC wire (BYA) through PVC conduit of
reputed manufacturer complete with fixing materials, other
accessories etc. as required including mending the damages
One
good. All electrical contacts shall be of brass / copper One Lakh
PART-F-ii : LAND Thousand
connected through connector or soldering (no twisting shall Twenty
SCAPING & Two
be allowed) and cables shall be manufactured and tested Thousand
306 PLANTATION 5 Rm 100.000 1204.001 Hundred 120400.100
according to IEC / BS / VDE standards along with relevant Four
(ELECTRICAL and Four
BDS standard as per detailed specification mentioned in Hundred
WORKS) point Zero
Annexure-1. The work shall be carried out as per direction & point One
Zero One
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge .
1C-4x10sqmm (NYY / 2XY) with 10 sqmm (BYA) ECC wire
through PVC pipe of minimum inner dia 40 mm having wall
thickness of 2.2 mm''

''SOCKET OUTLETS: 4.1) Providing & fixing 250 volt single

phase 3-pin combined switch socket outlet (surface /
Concealed type) manufactured and tested in accordance
with relevant IEC / VDE / NEMA / BS / JIS standards
PART-F-ii : LAND mounted on required size 18 SWG galvanized plain sheet Five One
SCAPING & board / Plastic Board (Self-extinguishing 650oC) of 76.2 mm. Hundred Thousand
307 PLANTATION 6 (3'''') depth. (Manufacturer shall have certificate of standard Each 2.000 501.001 and One 1002.002 AND Two
(ELECTRICAL which they follow). point Zero point Zero
WORKS) 13/15/16/20 Amps. Zero One Zero Two
Made in HONGKONG / MALAYSIA / SINGAPORE / S
KOREA / THAILAND
a) 16 Amps.
''

''GANG SWITCH: Providing & fixing 250 volts. 5 / 6 amps

(minimum) concealed type following switch / switch socket
manufactured and tested in accordance with relevant IEC / Two One
PART-F-ii : LAND
VDE / NEMA / BS / JIS standards mounted on required size Hundred Thousand
SCAPING &
18 SWG galvanized plain sheet / PVC board (Self- and AND
308 PLANTATION 7.1 Each 5.000 218.001 1090.005
extinguishing 650oC) of 76.2 mm (3'''') depth. All electrical Eighteen Ninety
(ELECTRICAL
contacts shall be of brass / copper. point Zero point Zero
WORKS)
Made in HONGKONG / MALAYSIA / SINGAPORE / S Zero One Zero Five
KOREA / THAILAND
7.1) One gang switch ''

Three
PART-F-ii : LAND Hundred Seven
SCAPING & and Hundred
309 PLANTATION 7.2 Two gang switch Each 2.000 375.001 Seventy- 750.002 and Fifty
(ELECTRICAL Five point point Zero
WORKS) Zero Zero Zero Two
One

One
Five
PART-F-ii : LAND Thousand
Hundred
SCAPING & AND
and
310 PLANTATION 7.3 Three gang switch Each 2.000 514.001 1028.002 Twenty-
Fourteen
(ELECTRICAL Eight point
point Zero
WORKS) Zero Zero
Zero One
Two

One
Thousand
Seven
PART-F-ii : LAND Five
Hundred
SCAPING & Hundred
and Sixty-
311 PLANTATION 7.4 Four gang switch Each 2.000 763.001 1526.002 and
Three
(ELECTRICAL Twenty-
point Zero
WORKS) Six point
Zero One
Zero Zero
Two

312 PART-F-ii : LAND 8 ''FLOOD LIGHT FITTINGS (LED):Supply & fixing LED flood Each 55.000 9350.001 Nine 514250.055 Five Lakh
SCAPING & light fittings of following specifications: Thousand Fourteen
PLANTATION Luminous efficacy: 100lm/w(minimum), Three Thousand
(ELECTRICAL Power Factor: minimum 0.95 Hundred Two
WORKS) Colour Rendering Index(Ra) :70≤Ra< 85 and Fifty Hundred
Driver: Should be of IEC standard such as point Zero and Fifty
MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or Zero One point Zero
equivalent Five Five
LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE
/ BRIDGELUX or equivalent.
Colour temperature : 3500K-6500K (Warm-White)
Material: Aluminium Alloy Aluminium reflector, Heat proof
glass/Polycarbonate
Model & sample to be accepted / approved by the Engineer-
in-charge (with 2 years warranty). 100 W
Gloria Cat no-GLFL-902
Energy+ cat no-EPFDL-17001 (100 W)
Cosmo cat no-BDTCL-LFDL-02
Adex-AD FLE 100W830

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 34/80
3/11/24, 2:55 PM View Form
Asha cat No-ACS-LFL-2156- (100 w)
or equivalent.''

''LED STRIP LIGHT FITTINGS: Supply & fixing LED track

strip light fittings of following specifications:
Luminous efficacy: 80 lm/w(minimum),
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :i) For Residential building
Ra≥80
ii) For office and other types of buildings 70≤Ra< 85 One
PART-F-ii : LAND Driver: Should be of IEC standard such as Thousand
One Lakh
SCAPING & MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or Five
Fifty-Six
313 PLANTATION 9 equivalent . LED chips :EPISTAR / OSRAM / mtr 100.000 1560.001 Hundred 156000.100
Thousand
(ELECTRICAL SIGNIFY(PHILIPS) / CREE / BRIDGELUX or equivalent. and Sixty
point One
WORKS) Colour temperature : 3500K-6500K (Warm-White) point Zero
Ingress Protection: IP 65 Zero One
Model & sample to be accepted / approved by the Engineer-
in-charge (with 2 years warranty). DC FLEXIBLE STRIP of
the following model number of Cosmo/Energy+ or similar
product of GLORIA /Asha/Adex etc.
BDTCL-Strip-01
Energy+ EPSS-46008''

''SINGLE PHASE DISTRIBUTION BOARD (SPDB):

Providing and fixing single phase distribution board (SPDB)
[concealed / surface] having the following components and
specifications: [Fig : 4.2]. 1. Steel board : Approximate size:
20''''x15''''x4''''
MS sheet : 18SWG with hinged type door and locking
arrangement duly painted with powder coating with epoxy
polyester resin on all surfaces of board (gray / off-white) etc.
In front side there will be tempered thick fiber glass of Twelve Twelve
minimum 8 mm thickness with rubber gaskets to observe the Thousand Thousand
PART-F-ii : LAND inside arrangement. 2. Copper bar: Approximate size: 10''''x Eight Eight
SCAPING & 1''''x 3mm(2 nos) and 6''''x 1''''x 3mm, (1 no) mounted on Hundred Hundred
314 PLANTATION 10 insulator at both ends, capacity: 60-100A . 3. 1 No. Each 1.000 12829.001 and 12829.001 and
(ELECTRICAL DPMCB(main control) and following nos.SPMCB, DPMCB Twenty- Twenty-
WORKS) and SPMCB Manufactured / Assembled and tested in Nine point Nine point
accordance with relevant BDS IEC 60898-1:2016 and IEC / Zero Zero Zero Zero
VDE / NEMA / BS / JIS standard. One One
Minimum breaking capacity 6/10 KA with thermal overcurrent
and instantaneous electromagnetic short circuit release. 4.
Loop Cable [from phase bar to SPMCB(circuit & power)]
Size: 1C-1x2.5 sq mm (BYM) with DPMCB and SPMCBs
accepted / approved by the Engineer-in-charge.
6-way SPDB
Incoming : 1x40A DPMCB (6 KA)
Outgoing : 6x5-10A SPMCB (6 KA)''

CIRCUIT BREAKER (SPMCB): Providing & fixing on a Three

PART-F-ii : LAND Seven
prepared board 250 volt grade following single pole miniature Thousand
SCAPING & Hundred
circuit breaker (SPMCBS) having minimum breaking capacity Nine
315 PLANTATION 11.a Each 5.000 780.001 and Eighty 3900.005
6-KA with thermal over-current and instantaneous Hundred
(ELECTRICAL point Zero
electromagnetic short circuit release provision. as per point Zero
WORKS) Zero One
SPMCBS accepted / approved by the engineer. a) 10 Amps. Zero Five

One
PART-F-ii : LAND Seven Thousand
SCAPING & Hundred Five
316 PLANTATION 11.b 16 Amps. Each 2.000 780.001 and Eighty 1560.002 Hundred
(ELECTRICAL point Zero and Sixty
WORKS) Zero One point Zero
Zero Two

One
PART-F-ii : LAND Seven Thousand
SCAPING & Hundred Five
317 PLANTATION 11.c 20 Amps. Each 2.000 780.001 and Eighty 1560.002 Hundred
(ELECTRICAL point Zero and Sixty
WORKS) Zero One point Zero
Zero Two

One
PART-F-ii : LAND Seven Thousand
SCAPING & Hundred Five
318 PLANTATION 11.d 25 Amps. Each 2.000 780.001 and Eighty 1560.002 Hundred
(ELECTRICAL point Zero and Sixty
WORKS) Zero One point Zero
Zero Two

''TPMCB : Providing & fixing on a prepared board 500 volt Four Four
PART-F-ii : LAND
grade following Triple pole miniature circuit Breaker (TPMCB) Thousand Thousand
SCAPING &
having minimum breaking capacity 6-KA /10 KA with thermal AND AND
319 PLANTATION 12 Each 1.000 4030.001 4030.001
over-current and instantaneous electromagnetic short circuit Thirty Thirty
(ELECTRICAL
release provision. point Zero point Zero
WORKS)
TPMCB accepted / approved by the engineer. a) 10 Amps.'' Zero One Zero One

''TPMCCB: Providing & fixing on a prepared board 500 volt Seven Seven
grade following triple-pole molded case circuit breaker Thousand Thousand
PART-F-ii : LAND
(TPMCCB) with thermal over-current and instantaneous Four Four
SCAPING &
electromagnetic short circuit release provision, manufactured Hundred Hundred
320 PLANTATION 13 Each 1.000 7466.001 7466.001
and tested in accordance with relevant IEC / VDE / NEMA / and Sixty- and Sixty-
(ELECTRICAL
BS / JIS standards. Six point Six point
WORKS)
TPMCCB accepted / approved by the engineer. a) 50 Amps. Zero Zero Zero Zero
(minimum 10-KA)'' One One

Two Two
''BUS - BAR: Providing and fixing 500 V 3-phase bus-bar
Thousand Thousand
PART-F-ii : LAND system assembled in prelaid board with porcelain insulators.
Five Five
SCAPING & There will be equal size holes on every bar at 0.5'''' interval
Hundred Hundred
321 PLANTATION 14 and bar to bar gap shall be 2'''' - 3''''. Each 1.000 2544.001 2544.001
and Forty- and Forty-
(ELECTRICAL a) 60 - 100 Amps. Copper flat bar (5 nos) : 4 nos 9''''
Four point Four point
WORKS) x1''''x3mm and 1 no 4''''x1''''x4mm for earthing mounted on
Zero Zero Zero Zero
insulator at both ends individually.''
One One

322 PART-F-ii : LAND 15 ''BOARD: Supplying and fixing of almirah type 18 SWG metal sqm 1.000 18780.001 Eighteen 18780.001 Eighteen
SCAPING & board of depth 228mm (6?) duly painted with powder coating Thousand Thousand
PLANTATION with epoxy polyester resin on all surfaces of board (gray / off- Seven Seven

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 35/80
3/11/24, 2:55 PM View Form
(ELECTRICAL white) having built in push type / suitable locking Hundred Hundred
WORKS) arrangement including metal bridges of suitable size for fixing and Eighty and Eighty
of all electrical control devices complete with suitable point Zero point Zero
anchoring arrangement in wall / column and keeping Zero One Zero One
provision for cable inlets and exits as required (only front
surface of the board will be considered for measurement).
(Manufactured by RECO / NASCO / C&S or equivalent
product of any other manufacturer) The front side of the
boards should be covered with required size tempered thick
fiber glass with rubber gaskets to observe the inside
arrangement. ''

''PVC PIPE : Providing & laying of following PVC pipe (best

quality PVC pipe of reputed manufacturer) embedded in wall
PART-F-ii : LAND
/ column / ceiling / floor etc. with all accessories, 18 SWG GP Twenty-
SCAPING & Fifty point
sheet pull box with 3 mm thick ebonite sheet cover, fixing Five
323 PLANTATION 16.a Rm 500.000 50.001 Zero Zero 25000.500
materials etc. as required including mending the damages Thousand
(ELECTRICAL One
good. point Five
WORKS)
a) Minimum inner dia 20 mm & minimum wall thickness 1.5
mm. ''

PART-F-ii : LAND Thirteen

Sixty-
SCAPING & Thousand
b) Minimum inner dia 25 mm & minimum wall thickness 1.7 Seven
324 PLANTATION 16.b Rm 200.000 67.001 13400.200 Four
mm. point Zero
(ELECTRICAL Hundred
Zero One
WORKS) point Two

Four
PART-F-ii : LAND
Ninety- Thousand
SCAPING &
c) Minimum inner dia 30 mm & minimum wall thickness 1.9 Two point Six
325 PLANTATION 16.c Rm 50.000 92.001 4600.050
mm. Zero Zero Hundred
(ELECTRICAL
One point Zero
WORKS)
Five

Providing layout and carry over PWD bench-mark (BM) at

Fifteen
site from nearby BM pillar, property lines, existing ground
PART-G-i : 02- Thousand
level (EGL), formation ground level (FGL), highest flood Thirty-
STORIED One
levels (HFL), plinth levels (PL), mean sea level (MSL), setting Three
326 SECURITY 1 Sqm 460.000 33.001 15180.460 Hundred
and marking all pillars, marker, pegs etc. showing and point Zero
BUILDING (CIVIL and Eighty
maintaining reduced levels (RL's) including locating, Zero One
WORKS) point Four
establishing, protecting all public utilities within the premise
Six
of work and finally all to be presented in black and white.

Mobilization and cleaning site before commencing actual

physical work and during contract period and demobilization
after completion of the works under contract to be accepted
by the Engineer-in-charge. This work shall also cover
cleaning and clearing, cutting or filling, dressing the project Two One Lakh
PART-G-i : 02-
area on and in the ground to an extent that all the events of Hundred Two
STORIED
works of the project can be executed smoothly in a working and Hundred
327 SECURITY 2 Sqm 460.000 218.001 100280.460
environment with a particular attention on safety and security Eighteen and Eighty
BUILDING (CIVIL
in all respects, and to stockpile the end outcome to a place point Zero point Four
WORKS)
for disposal agreed by the Engineer-in-charge, where, Zero One Six
payments are to be based on ground area determined by the
Engineer-in-charge and be proportionate to the percentage
progress of work under contract as a whole in all respects
and approved by the Engineer-in-charge.

''Earth work in excavation in all kinds of soil for foundation

trenches including layout, providing center lines, local bench-
mark pillars, levelling, ramming and preparing the base,
fixing bamboo spikes and marking layout with chalk powder,
providing necessary tools and plants, protecting and Eight
PART-G-i : 02- maintaining the trench dry etc., stacking, cleaning the Thousand
STORIED excavated earth at a safe distance out of the area enclosed Nineteen Seven
328 SECURITY 3.a by the layout etc. all complete and accepted by the Engineer- Sqm 460.000 19.001 point Zero 8740.460 Hundred
BUILDING (CIVIL in-charge, subject to submit method statement of carrying out Zero One and Forty
WORKS) excavation work to the Engineer-in-charge for approval. point Four
However, engineer's approval shall not relieve the contractor Six
of his responsibilities and obligations under the contract.
a) Layout and marking for earthwork in excavation in
foundation accepted by the Engineer-in-charge. [Plinth area
of the structure shall be considered for measurement]''

One
PART-G-i : 02-
Hundred Forty-Two
STORIED
Earthwork in excavation in foundation trenches up to 1.5 m and Sixty- Thousand
329 SECURITY 3.b Cum 250.000 168.001 42000.250
depth and maximum 10 m lead Eight point point Two
BUILDING (CIVIL
Zero Zero Five
WORKS)
One

One
Nine
PART-G-i : 02- Hundred
Thousand
STORIED and
Added rate for Each additional 0.5 meter depth exceeding Nine
330 SECURITY 3.c Cum 50.000 198.001 Ninety- 9900.050
1.5 meter to 2.0 meter Depth Hundred
BUILDING (CIVIL Eight point
point Zero
WORKS) Zero Zero
Five
One

Two
Eleven
PART-G-i : 02- Hundred
Thousand
STORIED and
Added rate for Each additional 0.5 meter depth exceeding Four
331 SECURITY 3.d Cum 50.000 228.001 Twenty- 11400.050
2.0 meter to 2.5 meter Depth Hundred
BUILDING (CIVIL Eight point
point Zero
WORKS) Zero Zero
Five
One

Two Twelve
PART-G-i : 02-
Hundred Thousand
STORIED
Added rate for Each additional 0.5 meter depth exceeding and Fifty- Nine
332 SECURITY 3.e Cum 50.000 258.001 12900.050
2.5 meter to 3.0 meter Depth Eight point Hundred
BUILDING (CIVIL
Zero Zero point Zero
WORKS)
One Five

333 PART-G-i : 02- 3.f Added rate for Each additional 0.5 meter depth exceeding Cum 50.000 288.001 Two 14400.050 Fourteen
STORIED 3.0 meter to 3.5 meter Depth Hundred Thousand
SECURITY and Four
Eighty- Hundred

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 36/80
3/11/24, 2:55 PM View Form
BUILDING (CIVIL Eight point point Zero
WORKS) Zero Zero Five
One

Four Sixteen
PART-G-i : 02- Hundred Thousand
STORIED and Five
Bailing out of trapped water caused by inundation or rain, by
334 SECURITY 4 Hour 35.000 474.001 Seventy- 16590.035 Hundred
pump from foundation trenches.
BUILDING (CIVIL Four point and Ninety
WORKS) Zero Zero point Zero
One Three Five

Three
Seven
PART-G-i : 02- Thousand
Shore protection work during excavation in foundation Hundred
STORIED Five
trenches up to 1.5 m depth to protect loss due to damage of and
335 SECURITY 5 Sqm 5.000 712.001 3560.005 Hundred
property by palisading accepted by the Engineer-in-charge. Twelve
BUILDING (CIVIL and Sixty
[The rate is including the cost of vertical post] point Zero
WORKS) point Zero
Zero One
Zero Five

One Lakh
One Fifty-One
PART-G-i : 02- Thousand Thousand
Shore protection work during excavation in foundation
STORIED AND Eight
trenches beyond 1.5 m depth to protect loss due to damage
336 SECURITY 6 Sqm 145.000 1047.001 Forty- 151815.145 Hundred
of property by palisading accepted by the Engineer-in-
BUILDING (CIVIL Seven and
charge. [The rate is including the cost of vertical post]
WORKS) point Zero Fifteen
Zero One point One
Four Five

Two Lakh
One
Sand filling in foundation trenches and plinth with sand Thirty-
Thousand
PART-G-i : 02- having min. F.M. 1.2 in 150 mm in layers including leveling, Three
Two
STORIED watering and compaction to achieve minimum dry density of Thousand
Hundred
337 SECURITY 7 95% with optimum moisture content (Modified proctor test) Cum 180.000 1296.001 233280.180 Two
and
BUILDING (CIVIL by ramming Each layer up to finished level as per design Hundred
Ninety-Six
WORKS) supplied by the design office only, all complete and accepted and Eighty
point Zero
by the Engineer-in-charge. point One
Zero One
Eight

Three
Compacted cement sand filling in foundation trenches and
Thousand Thirty-One
plinth with cement and coarse sand having min. F.M. 1.2 mix
PART-G-i : 02- One Thousand
ratio (1:15) in 150 mm in layers including leveling, watering
STORIED Hundred Two
and compaction to achieve minimum dry density of 95% with
338 SECURITY 8 Cum 10.000 3125.001 and 31250.010 Hundred
optimum moisture content (Modified proctor test) by ramming
BUILDING (CIVIL Twenty- and Fifty
each layer up to finished level as per design supplied by the
WORKS) Five point point Zero
design office only etc. all complete and accepted by the
Zero Zero One
Engineer-in-charge. (Cement: CEM-II/B-M)
One

Earth filling in foundation trenches and plinth in 150 mm layer Forty-Nine

PART-G-i : 02- with earth available within 90 m of the building site to achive Two Thousand
STORIED minimum dry density of 95% with optimum moisture content Hundred Six
339 SECURITY 9 (Modified proctor test) including carrying watering, leveling, Cum 240.000 207.001 and Seven 49680.240 Hundred
BUILDING (CIVIL dressing and compacting to a specified percentage Each point Zero and Eighty
WORKS) layer up to finished level etc. all complete and accepted by Zero One point Two
Engineer-in-charge. Four

One Lakh
Forty-
Seven Seven
PART-G-i : 02- Cleaning and disposing of excavated earth from the
Hundred Thousand
STORIED construction site by truck or by any other means to a place
and Fifty- Four
340 SECURITY 10 within 30 km radius of the city or town area including loading Cum 195.000 756.001 147420.195
Six point Hundred
BUILDING (CIVIL & unloading at both ends, leveling and dressing the carried
Zero Zero and
WORKS) earth etc. complete and accepted by the Engineer-in-charge.
One Twenty
point One
Nine Five

Two Lakh
Forty-Four
Six
PART-G-i : 02- Thousand
One layer brick flat soling in foundation or in floor with first Hundred
STORIED Eight
class/picked jhama bricks (BDS 208) including preparation of and Thirty-
341 SECURITY 11 Sqm 385.000 636.001 244860.385 Hundred
bed and filling the interstices with local sand, leveling etc. Six point
BUILDING (CIVIL and Sixty
complete and accepted by the Engineer-in-charge. Zero Zero
WORKS) point
One
Three
Eight Five

One Lakh
''Lean / blinding concrete (1:3:6) in foundation or in floor with Twenty-
Nine
cement, sand (F.M. 1.2) and picked jhama brick chips Six
Thousand
PART-G-i : 02- including breaking of chips, screening, mixing, laying, Thousand
Three
STORIED compacting to required level and curing for at least 7 days Three
Hundred
342 SECURITY 12 including the supply of water, electricity, costs of tools & Cum 13.500 9362.001 126387.014 Hundred
and Sixty-
BUILDING (CIVIL plants and other charges etc. all complete and accepted by and
Two point
WORKS) the Engineer-in-charge.(Cement: CEM-II/B-M) Eighty-
Zero Zero
a) Lean / blinding concrete in foundation (1:3:6) with cement, Seven
One
brick chips and sand of F.M. 1.2'' point Zero
One Four

''Mass concrete (1:2:4) in foundation or in floor with cement,

Ten Ten
sand (F.M. 1.2) and picked jhama brick chips including
Thousand Thousand
PART-G-i : 02- breaking of chips, screening, mixing, laying, compacting to
Four Four
STORIED required level and curing for at least 7 days including the
Hundred Hundred
343 SECURITY 13 supply of water, electricity, costs of tools & plants and other Cum 1.000 10458.001 10458.001
and Fifty- and Fifty-
BUILDING (CIVIL charges etc. all complete and accepted by Engineer-in-
Eight point Eight point
WORKS) charge. (Cement: CEM-II/B-M)
Zero Zero Zero Zero
a) Mass concrete in floor (1:2:4) with brick chips and local
One One
sand of F.M. 1.2.''

Five
PART-G-i : 02- Thousand
Supplying and laying of single layer polythene sheet Forty-
STORIED Six
weighing one kilogram per 6.5 square meter in floor or any Seven
344 SECURITY 14 Sqm 120.000 47.001 5640.120 Hundred
where below cement concrete complete in all respect and point Zero
BUILDING (CIVIL and Forty
accepted by Engineer-in-charge. Zero One
WORKS) point One
Two

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 37/80
3/11/24, 2:55 PM View Form
Three
Brick works with first class bricks with cement sand (F.M. 1.2) Nine
Lakh
PART-G-i : 02- mortar (1:6) in foundation and plinth, filling the Thousand
Nineteen
STORIED joints/interstices fully with mortar, racking out the joints, One
Thousand
345 SECURITY 15 cleaning and soaking the bricks at least for 24 hours before Cum 35.000 9140.001 Hundred 319900.035
Nine
BUILDING (CIVIL use and curing at least for 7 days etc. all complete including and Forty
Hundred
WORKS) cost of water, electricity and other charges and accepted by point Zero
point Zero
the Engineer-in-charge. (Cement: CEM-II/B-M) Zero One
Three Five

''Brick works with first class bricks with cement sand (F.M.
Eight Lakh
1.2) mortar (1:4) in exterior walls including filling the
Ten Fifty-Eight
interstices with mortar, raking out joints, cleaning and socking
PART-G-i : 02- Thousand Thousand
the bricks at least for 24 hours before use and washing of
STORIED AND Two
sand, necessary scaffolding, curing at least for 7 days etc. all
346 SECURITY 16.i Cum 85.000 10097.001 Ninety- 858245.085 Hundred
complete including cost of water, electricity and other
BUILDING (CIVIL Seven and Forty-
charges (measurement to given as 250 mm width for one
WORKS) point Zero Five point
brick length and 375 mm for one brick and a half brick length)
Zero One Zero Eight
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M)
Five
i) Ground floor''

Ten
Thousand
Four Lakh
PART-G-i : 02- Two
Eleven
STORIED Hundred
Thousand
347 SECURITY 16.ii ii) 1st floor Cum 40.000 10276.001 and 411040.040
AND Forty
BUILDING (CIVIL Seventy-
point Zero
WORKS) Six point
Four
Zero Zero
One

Seven
Ten
Lakh
Thousand
PART-G-i : 02- Thirty-One
Four
STORIED Thousand
Hundred
348 SECURITY 16.iii iii) 2nd floor/ Roof Top Cum 70.000 10455.001 731850.070 Eight
and Fifty-
BUILDING (CIVIL Hundred
Five point
WORKS) and Fifty
Zero Zero
point Zero
One
Seven

''125 mm brick works with first class bricks with cement sand
Seventy-
(F.M. 1.2) mortar (1:4) and making bond with connected walls One
Seven
PART-G-i : 02- including necessary scaffolding, raking out joints, cleaning Thousand
Thousand
STORIED and soaking the bricks for at least 24 hours before use and Four
Four
349 SECURITY 17.i washing of sand, curing at least for 7 days in all floors Sqm 55.000 1408.001 Hundred 77440.055
Hundred
BUILDING (CIVIL including cost of water, electricity and other charges etc. all and Eight
and Forty
WORKS) complete and accepted by the Engineer-in-charge. (Cement: point Zero
point Zero
CEM-II/B-M) Zero One
Five Five
i) Ground floor''

One Lakh
Ninety-
One
Three
Thousand
PART-G-i : 02- Thousand
Four
STORIED Nine
Hundred
350 SECURITY 17.ii ii) 1st floor Sqm 135.000 1437.001 193995.135 Hundred
and Thirty-
BUILDING (CIVIL and
Seven
WORKS) Ninety-
point Zero
Five point
Zero One
One Three
Five

One
Seven
Thousand
PART-G-i : 02- Thousand
Four
STORIED Three
Hundred
351 SECURITY 17.iii iii) 2nd floor/ Roof Top Sqm 5.000 1466.001 7330.005 Hundred
and Sixty-
BUILDING (CIVIL and Thirty
Six point
WORKS) point Zero
Zero Zero
Zero Five
One

''Providing brick works for 200 mm x 50 mm facing in

superstructure with 200 mm x 50 mm x 50 mm machine
made hard pressed klinker facing red or maroon strips of
Two Nineteen
approved quality with 20 mm thick cement sand (F.M.1.2)
Thousand Lakh
PART-G-i : 02- mortar (1:4), 10 mm thick cement mortar in adjacent sides
Nine Seven
STORIED including racking out joints and cutting the bricks to required
Hundred Thousand
352 SECURITY 18.i sizes wherever necessary with high class recessed pointing, Sqm 650.000 2934.001 1907100.650
and Thirty- One
BUILDING (CIVIL cleaning and soaking the bricks for at least 24 hours before
Four point Hundred
WORKS) use and washing of sand, necessary scaffolding, curing at
Zero Zero point Six
least for 7 days for all floors up to 4th floor including cost of
One Five
water, electricity and other charges etc. all complete and
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M)
i) Ground floor''

Nine Lakh
Two Seventy-
Thousand Seven
PART-G-i : 02-
Nine Thousand
STORIED
Hundred Seven
353 SECURITY 18.ii ii) 1st floor Sqm 330.000 2963.001 977790.330
and Sixty- Hundred
BUILDING (CIVIL
Three and Ninety
WORKS)
point Zero point
Zero One Three
Three

Two
Fourteen
Thousand
Lakh
PART-G-i : 02- Nine
Eighty-
STORIED Hundred
One
354 SECURITY 18.iii iii) 2nd floor/ Roof Top Sqm 495.000 2992.001 and 1481040.495
Thousand
BUILDING (CIVIL Ninety-
AND Forty
WORKS) Two point
point Four
Zero Zero
Nine Five
One

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 38/80
3/11/24, 2:55 PM View Form
''Fancy screen work with different size hollow machine made
design blocks of uniform colour, carefully laid in cement sand
(F.M. 1.2) mortar (1:3) in all floors in wall with uniform mortar Sixty-
Four
joints, true to vertical and horizontal line including racking out Three
Thousand
PART-G-i : 02- joints, cleaning and soaking the blocks for minimum 24 hours Thousand
Five
STORIED before use including washing and screening of sand, Nine
Hundred
355 SECURITY 19.i scaffolding, curing etc. complete in all respect including Sqm 14.000 4568.001 63952.014 Hundred
and Sixty-
BUILDING (CIVIL supply of all necessary materials, cost of water, electricity and Fifty-
Eight point
WORKS) and other charges accepted by the Engineer-in-charge. Two point
Zero Zero
(Cement: CEM-II/B-M) Zero One
One
With design block size: 114 mm x 114 mm x 114 mm or Four
equivalent volume & design.
i) Ground floor''

Four
Ninety-
Thousand
One
PART-G-i : 02- Five
Thousand
STORIED Hundred
Nine
356 SECURITY 19.ii ii) 1st floor Sqm 20.000 4597.001 and 91940.020
Hundred
BUILDING (CIVIL Ninety-
and Forty
WORKS) Seven
point Zero
point Zero
Two
Zero One

Four
Thousand Sixty-Nine
PART-G-i : 02- Six Thousand
STORIED Hundred Three
357 SECURITY 19.iii iii) 2nd floor/ Roof Top Sqm 15.000 4626.001 and 69390.015 Hundred
BUILDING (CIVIL Twenty- and Ninety
WORKS) Six point point Zero
Zero Zero One Five
One

''38 mm thick artificial patent stone (1:2:4) flooring with Ninety-

cement, best quality coarse sand (50% quantity of Sylhet Three
sand or coarse sand of equivalent F.M. 2.2 and 50% best Seven Thousand
PART-G-i : 02-
quality local sand of FM 1.2) and 12 mm down well graded Hundred Six
STORIED
stone chips, laying the concrete in alternate panels, and Forty- Hundred
358 SECURITY 20.i Sqm 125.000 749.001 93625.125
compacting and finishing the top with neat cement and curing Nine point and
BUILDING (CIVIL
at least for 7 days in all floors including cost of water, Zero Zero Twenty-
WORKS)
electricity and other charges etc. all complete and accepted One Five point
by the Engineer-in-charge. Cement: (CEM-II/B-M) One Two
i) Ground floor'' Five

Forty-
Seven Three
PART-G-i : 02- Hundred Thousand
STORIED and Nine
359 SECURITY 20.ii iii) 2nd floor/ Roof Top Sqm 55.000 799.001 Ninety- 43945.055 Hundred
BUILDING (CIVIL Nine point and Forty-
WORKS) Zero Zero Five point
One Zero Five
Five

''Boring/ drilling by wash or percussion method for cast in situ

pile up to the required depth and diameter with minimum 6 m
long temporary steel casing, true to vertical, providing
bentonite slurry and maintaining water level in the hole,
washing the hole for at least 30 minutes, cleaning the bore
One Seven
hole and making the bore hole ready for placing steel cage
Thousand Lakh
and concreting including hire charge of rig set with winch
PART-G-i : 02- Two Forty-Four
machine, tripod stand, tremie pipe, cost of fuel, lubricant,
STORIED Hundred Thousand
mobilization, demobilization, maintenance, spares, stand-
360 SECURITY 21 Rm 610.000 1221.001 and 744810.610 Eight
byes, insurance coverage, water, electricity and other
BUILDING (CIVIL Twenty- Hundred
charges all complete, approved and accepted by the
WORKS) One point and Ten
Engineer-in-charge. Before commencing boring operation,
Zero Zero point Six
contractor shall submit the method statement of cast-in-situ
One One
pile work including sequence of boring and casting, disposal
of spoils to the Engineer-in-charge for approval. However,
Engineer's approval shall not relieve the contractor of his
responsibilities and obligations under contract.
i) 500 mm dia''

Two Lakh
Removing of spoils / mud accumulated during boring for cast
Seven Seventy-
PART-G-i : 02- in situ pile by wash boring from working site to a safe
Hundred Nine
STORIED distance by contractor's own arrangement i.e. with container
and Forty- Thousand
361 SECURITY 22 set in truck or on cart including loading, unloading everything Cum 375.000 744.001 279000.375
Four point point
BUILDING (CIVIL complete as per standard practice and accepted by the
Zero Zero Three
WORKS) Engineer-in-charge. (Quantity should be given three times of
One Seven
solid volume of boring)
Five

362 PART-G-i : 02- 23 Cast in situ pile with reinforced cement concrete works of Cum 125.000 19000.001 Nineteen 2375000.125 Twenty-
STORIED high slump by adding high range water reducing admixture Thousand Three
SECURITY (ASTM C494 Type A or F) with minimum cement content point Zero Lakh
BUILDING (CIVIL relates to mix ratio 1 : 1.5 : 3 having minimum f'cr = 26 Mpa, Zero One Seventy-
WORKS) and satisfying a specified compressive strength f?c = 21 Mpa Five
at 28 days on standard cylinders as per standard practice of Thousand
Code ACI/BNBC/ASTM & cement conforming to BDS EN- point One
197-1- CEM -1,52.5 N / ASTM-C 150 Type ? I, best quality Two Five
coarse sand [Sylhet sand or coarse sand of equivalent
F.M.2.2], 20 mm down well graded crushed stone chips
conforming to ASTM C-33, including breaking chips,
screening through proper sieves, making, placing re-bar
cage in position, placing and removing tri-pod as per
requirement, pouring the concrete in bore-hole with the help
of a tremie pipe, maintaining the tremie pipe immersed in
concrete by at least 1 meter throughout the period of
concreting, maintaining required slump, etc. mixing the
aggregates with standard mixer machine with hopper, casting
in forms, all complete including water, electricity, testing of
materials and concrete etc and other charges as per design,
drawing etc all complete approved and accepted by the
Engineer-in-charge. (Rate is excluding the cost of
reinforcement and its fabrication, binding, welding, placing
and admixture (approx doses 150 to 250 ml per bag of

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 39/80
3/11/24, 2:55 PM View Form
cement which is to be fixed upon consultation with design
office)

Eighty-
Providing and making point welding at contact point of the Two
PART-G-i : 02- spiral binders at reasonable intervals with the main Thousand
STORIED reinforcements by electric arc welding for construction of cast Four point Eight
363 SECURITY 24 in situ bored pile carefully with highly oxidized electrodes, Point 20700.000 4.001 Zero Zero 82820.700 Hundred
BUILDING (CIVIL making the points prominent and accepted by the Engineer- One and
WORKS) in-charge (Rate is inclusive of all materials labour, tools and Twenty
plants, electricity and all equipment). point
Seven

Sixty
Providing and making welded splice over two sides of
Four Thousand
contact by welding of minimum 300 mm length at the lap of
PART-G-i : 02- Hundred Three
main reinforcement in re-bar cage to be placed in bore-hole
STORIED and Hundred
where necessary by electric arc welding with highly oxidized
364 SECURITY 25 Rm 125.000 483.001 Eighty- 60375.125 and
electrodes making the joint prominent all complete and
BUILDING (CIVIL Three Seventy-
accepted by the Engineer-in-charge. (Rate is inclusive of all
WORKS) point Zero Five point
materials labour, tools and plants, electricity and all
Zero One One Two
equipment).
Five

Labour for breaking head of hardened cast in situ bored pile/

pre-cast pile up to a required length by any means but
Three
without damaging the rest and removing the dismantled
Thousand Thirty-Five
materials such as concrete to a safe distance including
PART-G-i : 02- Five Thousand
scraps and cleaning concrete from steel/M.S. rods,
STORIED Hundred Nine
straightening and bending of pile bars, preparation and
365 SECURITY 26 Cum 10.000 3595.001 and 35950.010 Hundred
making platform where necessary, carrying, all sorts of
BUILDING (CIVIL Ninety- and Fifty
handling, stacking the same properly after clearing, leveling
WORKS) Five point point Zero
and dressing the situ and clearing the bed etc. complete in all
Zero Zero One
respect and accepted by the Engineer-in-charge.
One
(Measurement will be given for the actual pile head volume
to be broken)

''Conducting static load test as per ASTM D1143 or

equivalent standard for the cast-in-situ/pre-cast pile providing
required scaffolding, bracing, jacks, pressure test gauge,
loading unloading, Kentledge and other plants and
equipment including staging, mobilization, demobilization,
hire charge, gunny bags, sand and filling sacs/gunny bags
for loading, record readings and preparation of results in
standard forms and other incidental charges as per standard
practice and procedures including submission of load test Five Five
report, furnishing all graph and chart etc. complete in all Thousand Thousand
PART-G-i : 02-
respect approved and accepted by the Engineer-in-charge Six Six
STORIED
(Minimum two cyclic loading; one at service load and another Per set per Hundred Hundred
366 SECURITY 27.a 1.000 5644.001 5644.001
cycle at double the service load then to continue loading till site and Forty- and Forty-
BUILDING (CIVIL
failure of the pile). Before commencing load test, contractor Four point Four point
WORKS)
shall submit method statement for conducting load test to the Zero Zero Zero Zero
Engineer-in-charge for approval. However, Engineer's One One
approval shall not relieve the Contractor of his
responsibilities and obligations under Contract. Load test and
report shall be conducted under the supervision of a
professional Geotechnical Engineer registered in BPERB or
Geotechnical firm registerd in PWD. Boring and pouring logs
/ driving logs of piles and method statement shall be the part
of load test report.
a) Mobilization & de-mobilization of testing equipment''

Six Six
Thousand Thousand
PART-G-i : 02- Six Six
STORIED Hundred Hundred
Per set per
367 SECURITY 27.b b) Calibration of pressure gauge 1.000 6626.001 and 6626.001 and
site
BUILDING (CIVIL Twenty- Twenty-
WORKS) Six point Six point
Zero Zero Zero Zero
One One

Eighty- Eighty-
Nine Nine
PART-G-i : 02-
Thousand Thousand
STORIED
''c) For 50 tonne load, Per set per Eight Eight
368 SECURITY 27.c 1.000 89803.001 89803.001
i) For first test at one site for one testing set'' site Hundred Hundred
BUILDING (CIVIL
and Three and Three
WORKS)
point Zero point Zero
Zero One Zero One

One
PART-G-i : 02-
Thousand Thirty
STORIED ''d) For intermediate loading from 50 tonne to 100 tonne for
Two Thousand
369 SECURITY 27.d Each additional tonne. Tonne 25.000 1200.001 30000.025
Hundred point Zero
BUILDING (CIVIL i) For first test at one site for one testing set''
point Zero Two Five
WORKS)
Zero One

''PIT (Pile integrity test) : Conducting low strain dynamic

testing of pile as per ASTM D5882-The standard method for
low-strain integrity testing of pile by a qualified and approved
PIT expert, preparing pile heads and providing all relevant
materials, equipment, experts, labour, mobilization,
demobilization, data acquisition and analysis, preparation of
Thirty- Thirty-
results in standard forms and compiling final report with
Four Four
recommendations on the tests etc. complete in all respect
PART-G-i : 02- Thousand Thousand
approved and accepted by the Engineer-in-charge. (Report
STORIED Three Three
shall contain driving log / boring and pouring logs, graphs & upto 1st 12
370 SECURITY 28.a 1.000 34357.001 Hundred 34357.001 Hundred
statement on ''''Callibration Pile'''' (pile that tested for its Piles
BUILDING (CIVIL and Fifty- and Fifty-
capacity and PIT done eralier on it, at a place of known soil
WORKS) Seven Seven
profiles), soil investigation report. (Caliberation pile shall be
point Zero point Zero
made and tested first). Method statement for conducting PIT
Zero One Zero One
shall be submitted to the Engineer for approval, and shall be
the part of PIT report, However, Engineer's approval shall not
relieve the contractor of his responsibilities and obligations
under contract.
a) Mobilization and demobilization to site and PIT on12
(twelve) piles or less''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 40/80
3/11/24, 2:55 PM View Form
One
Twenty-
Thousand
Nine
PART-G-i : 02- Four
Thousand
STORIED Hundred
b) For PIT test of Each additional pile after 12 (Twelve) pile Four
371 SECURITY 28.b Per Pile 20.000 1472.001 and 29440.020
tested at same site Hundred
BUILDING (CIVIL Seventy-
and Forty
WORKS) Two point
point Zero
Zero Zero
Two
One

''Reinforced cement concrete works with minimum cement

content relates to mix ratio 1:1.25:2.5 having maximum water
cement ratio = 0.40 and minimum f'cr = 40.5 MPa, satisfying
a specified compressive strength f?c = 32 MPa at 28 days on
standard cylinders as per standard practice of Code
ACI/BNBC/ASTM, Cement conforming to BDS EN-197-1-
CEM-I, 52.5N (52.5 MPa)/ ASTM-C 150 Type ? I, and adding
approved high range water reducing admixture of complying
specific type (generally be Type-G) under ASTM-C 494, best
quality coarse sand [Sylhet sand or coarse sand of
equivalent F.M. 2.2], 20 mm down well graded crushed stone
chips conforming to ASTM C-33 (Aggregate grading as per Twelve
PART-G-i : 02- table shown in technical specification), including conducting Lakh
Eighteen
STORIED necessary tests, screening sand through proper sieves, Twenty-
Thousand
372 SECURITY 29.1.a making and placing shutter in position and maintaining true Cum 68.000 18000.001 1224000.068 Four
point Zero
BUILDING (CIVIL to plumb, making shutter water-tight properly, placing Thousand
Zero One
WORKS) reinforcement in position; mixing with standard mixer point Zero
machine with hopper and fed by standard measuring boxes, Six Eight
casting in forms, compacting by vibrator machine and curing
at least for 28 days, removing centering-shuttering after
specified time approved; including cost of water, electricity,
other charges etc. all complete, approved and accepted by
the Engineer-in-charge. (Doses of admixture to be fixed in
consultation with design office) (Rate is excluding laboratory
test fees, the cost of reinforcement and its fabrication,
placing, binding etc. and the cost of shuttering & centering).
1) Casting
a) Pile Cap, Footing, Under Ground Water Reservoir Bottom
Slab, Ramp etc.''

''2) FORM WORK (Steel) Eighty-

Centering and shuttering, including strutting, propping etc. Five Five
PART-G-i : 02- (The formwork must be rigid enough both in and out of plane, Hundred Thousand
STORIED to make the concrete surface true to the designed shape and and Five
373 SECURITY 29.a.2 size by using necessary MS sheets of minimum 16 BWG, Sqm 147.000 582.001 Eighty- 85554.147 Hundred
BUILDING (CIVIL angles of minimum size 40 mm x 40 mm x 5 mm, flat bars Two point and Fifty-
WORKS) etc.) and removal of form for: Zero Zero Four point
Pile Cap, Footing, Lift & Under Ground Water Reservoir One One Four
Bottom Slab etc.'' Seven

PART-G-i : 02- Ten Lakh

''Pedestals, column, Under Ground Water Reservoir Wall and Eighteen
STORIED Sixty-Two
RCC wall Thousand
374 SECURITY 29.b.1.i Cum 59.000 18000.001 1062000.059 Thousand
1) Casting point Zero
BUILDING (CIVIL point Zero
i) Ground floor'' Zero One
WORKS) Five Nine

PART-G-i : 02- Two Lakh

Eighteen
STORIED Seventy
Thousand
375 SECURITY 29.b.1.ii ii) 1st floor Cum 15.000 18000.001 270000.015 Thousand
point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) One Five

Three
PART-G-i : 02-
Eighteen Lakh
STORIED
Thousand Ninety-Six
376 SECURITY 29.b.1.ii iii) 2nd floor/ Roof Top Cum 22.000 18000.001 396000.022
point Zero Thousand
BUILDING (CIVIL
Zero One point Zero
WORKS)
Two Two

Two Lakh
Five Thirty-
PART-G-i : 02- Hundred Seven
STORIED and Thousand
''2) Form Work/Shuttering (steel)
377 SECURITY 29.2.i Sqm 455.000 522.001 Twenty- 237510.455 Five
i) Ground floor''
BUILDING (CIVIL Two point Hundred
WORKS) Zero Zero and Ten
One point Four
Five Five

Sixty-Four
PART-G-i : 02- Five
Thousand
STORIED Hundred
Eight
378 SECURITY 29.2.ii ii) 1st floor Sqm 120.000 540.001 and Forty 64800.120
Hundred
BUILDING (CIVIL point Zero
point One
WORKS) Zero One
Two

One Lakh
Five Eight
PART-G-i : 02-
Hundred Thousand
STORIED
and Fifty- Eight
379 SECURITY 29.2.iiii iii) 2nd floor/ Roof Top Sqm 195.000 558.001 108810.195
Eight point Hundred
BUILDING (CIVIL
Zero Zero and Ten
WORKS)
One point One
Nine Five

380 PART-G-i : 02- 30.a.1 ''Reinforced cement concrete works with minimum cement Cum 22.000 17000.001 Seventeen 374000.022 Three
STORIED content relates to mix ratio 1:1.5:3 having maximum water Thousand Lakh
SECURITY cement ratio = 0.40 and minimum f'cr = 33.5 MPa, satisfying point Zero Seventy-
BUILDING (CIVIL a specified compressive strength f?c = 25 MPa at 28 days on Zero One Four
WORKS) standard cylinders as per standard practice of Code Thousand
ACI/BNBC/ASTM, Cement conforming to BDS EN-197-1- point Zero
CEM-I, 52.5N (52.5 MPa) / ASTM-C 150 Type ? I, best Two Two
quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and
20 mm down well graded stone chips conforming to ASTM C-
33 (Aggregate grading as per table shown in technical
specification), conducting necessary tests, making and
placing shutter in position and maintaining true to plumb,

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 41/80
3/11/24, 2:55 PM View Form
making shutter water-tight properly, placing reinforcement in
position; mixing with standard mixer machine with hopper,
fed by standard measuring boxes, casting in forms,
compacting by vibrator machine and curing at least for 28
days, removing centering-shuttering after specified time
approved; including cost of water, electricity, other charges
etc. all complete, approved and accepted by the Engineer-in-
charge. (Rate is excluding laboratory test fees, the cost of
reinforcement and its fabrication, placing, binding etc. and
the cost of shuttering & centering)
a) Foundation Beam
1) Casting''

Ninety-
''2) Form Work/Shuttering (steel) Four Three
PART-G-i : 02- Centering and shuttering, including strutting, propping etc. Hundred Thousand
STORIED (The formwork must be rigid enough both in and out of plane, and Six
381 SECURITY 30.a.2 to make the concrete surface true to the designed shape and Sqm 190.000 493.001 Ninety- 93670.190 Hundred
BUILDING (CIVIL size by using necessary MS sheets of minimum 16 BWG, Three and
WORKS) angles of minimum size 40 mm x 40 mm x 5 mm, flat bars point Zero Seventy
etc.) and removal of form for: a) Foundation Beam'' Zero One point One
Nine

PART-G-i : 02- Eighty-

Seventeen
STORIED Five
''Plinth level floor slab Thousand
382 SECURITY 30.b.1 Cum 5.000 17000.001 85000.005 Thousand
1) Casting'' point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) Zero Five

Five
Five
Thousand
PART-G-i : 02- Hundred
Eight
STORIED and
Hundred
383 SECURITY 30.b.2 2) Form Work/Shuttering (steel) Sqm 10.000 587.001 Eighty- 5870.010
and
BUILDING (CIVIL Seven
Seventy
WORKS) point Zero
point Zero
Zero One
One

PART-G-i : 02- Eighty-

Seventeen
STORIED ''Tee beam, L-beam and Rectangular beam Five
Thousand
384 SECURITY 30.c.1.i 1) Casting Cum 5.000 17000.001 85000.005 Thousand
point Zero
BUILDING (CIVIL i) Ground floor'' point Zero
Zero One
WORKS) Zero Five

PART-G-i : 02- Eighty-

Seventeen
STORIED Five
Thousand
385 SECURITY 30.c.1.ii ii) 1st floor Cum 5.000 17000.001 85000.005 Thousand
point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) Zero Five

PART-G-i : 02- Eighty-

Seventeen
STORIED Five
Thousand
386 SECURITY 30.c.1.iii iii) 2nd floor/ Roof Top Cum 5.000 17000.001 85000.005 Thousand
point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) Zero Five

PART-G-i : 02- Eighty-

Seventeen
STORIED ''Floor/ Roof & Over head water reservoir Slab Five
Thousand
387 SECURITY 30.d.1.i 1) Casting Cum 5.000 17000.001 85000.005 Thousand
point Zero
BUILDING (CIVIL i) Ground floor '' point Zero
Zero One
WORKS) Zero Five

PART-G-i : 02- Eighty-

Seventeen
STORIED Five
Thousand
388 SECURITY 30.d.1.ii ii) 1st floor Cum 5.000 17000.001 85000.005 Thousand
point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) Zero Five

PART-G-i : 02- Eighty-

Seventeen
STORIED Five
Thousand
389 SECURITY 30.d.1.iii iii) 2nd floor/ Roof Top Cum 5.000 17000.001 85000.005 Thousand
point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) Zero Five

Seventy-
PART-G-i : 02- Six
Seventeen
STORIED ''Stair case slab and steps Thousand
30.1.(e- Thousand
390 SECURITY 1) Casting Cum 4.500 17000.001 76500.005 Five
i) point Zero
BUILDING (CIVIL i) Ground floor'' Hundred
Zero One
WORKS) point Zero
Zero Five

Fifty-Nine
PART-G-i : 02-
Seventeen Thousand
STORIED
30.1.(e- Thousand Five
391 SECURITY ii) 1st floor Cum 3.500 17000.001 59500.004
ii) point Zero Hundred
BUILDING (CIVIL
Zero One point Zero
WORKS)
Zero Four

Twenty
Thousand
Five Three
PART-G-i : 02-
Hundred Hundred
STORIED ''2) Form Work/Shuttering (steel)
30.2.(e- and Fifty- and
392 SECURITY Stair case slab and steps Sqm 37.000 551.001 20387.037
i) One point Eighty-
BUILDING (CIVIL i) Ground floor ''
Zero Zero Seven
WORKS)
One point Zero
Three
Seven

Five Seventeen
PART-G-i : 02-
Hundred Thousand
STORIED
30.2.(e- and Sixty- AND
393 SECURITY ii) 1st floor Sqm 30.000 569.001 17070.030
ii) Nine point Seventy
BUILDING (CIVIL
Zero Zero point Zero
WORKS)
One Three

394 PART-G-i : 02- 31.(a-1) ''Reinforced cement concrete works from Ready-Mix Cum 46.000 18000.001 Eighteen 828000.046 Eight Lakh
STORIED concrete with minimum cement content relates to approved Thousand Twenty-

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 42/80
3/11/24, 2:55 PM View Form
SECURITY mix ratio having minimum f'cr = 40.5 MPa, satisfying a point Zero Eight
BUILDING (CIVIL specified compressive strength f?c = 32 MPa at 28 days on Zero One Thousand
WORKS) standard cylinders as per standard practice of Code ACI/ point Zero
BNBC/ ASTM,Cement conforming to BDS EN-197-1-CEM-I, Four Six
52.5N (52.5 MPa) / ASTM-C 150 Type ? I,best quality Sylhet
sand or coarse sand of equivalent F.M. 2.2 and 20 mm down
wellgraded stone chips conforming to ASTM C-33
(Aggregate grading as per table shown in technical
specification), High-range water reducing chemical admixture
Type-G under ASTM C494(Doses to be applied as per
Manufacturer's Guideline), conducting necessary tests,
making and placing shutter in position and maintaining true
to plumb, making shutter water-tight properly, placing
reinforcement in position; using machine batched and
machine mixed concrete using cement content as per
approved design mix (minimum 445 kg/ Cum), carrying to the
site of laying using Transit Mixer (considering Setting time of
concrete from plant to the site), including pumping of
concrete using line pump or boom placer to site of laying,
maintaining allowable slump of 100mm to150mm (measured
at site), casting in forms, compacting by vibrator machine
and curing at least for 28 days, removing centering-
shuttering after specified time approved; including cost of
water, electricity, cost of all materials and other charges etc.
all complete, approved and accepted by the Engineer-in-
charge. (Rate is excluding laboratory test fees, the cost of
reinforcement and its fabrication, placing, binding etc. and
the cost of shuttering & centering). (Foundation to 4th floor)
Note: The mix design shall be done from PWD testing
laboratory or other recognized laboratories and be consulted
with concerned design office.
a) Pile Cap/ Plinth level floor slab/ Ramp
1) Casting''

Forty-Two
''2) Form Work/Shuttering (steel)
Five Thousand
Centering and shuttering, including strutting, propping etc.
PART-G-i : 02- Hundred Two
(The formwork must be rigid enough both in and out of plane,
STORIED and Hundred
to make the concrete surface true to the designed shape and
395 SECURITY 31.(a-2) Sqm 72.000 587.001 Eighty- 42264.072 and Sixty-
size by using necessary MS sheets of minimum 16 BWG,
BUILDING (CIVIL Seven Four point
angles of minimum size 40 mm x 40 mm x 5 mm, flat bars
WORKS) point Zero Zero
etc.) and removal of form for:
Zero One Seven
a) Pile Cap/ Plinth level floor slab/ Ramp''
Two

Three
PART-G-i : 02-
Eighteen Lakh Six
STORIED ''Tee beam, L-beam and Rectangular beam
31.1.(b- Thousand Thousand
396 SECURITY 1) Casting Cum 17.000 18000.001 306000.017
i) point Zero point Zero
BUILDING (CIVIL i) Ground floor''
Zero One One
WORKS)
Seven

Two Lakh
PART-G-i : 02-
Eighteen Eighty-
STORIED
31.1.(b- Thousand Eight
397 SECURITY ii) 1st floor Cum 16.000 18000.001 288000.016
ii) point Zero Thousand
BUILDING (CIVIL
Zero One point Zero
WORKS)
One Six

PART-G-i : 02-
Eighteen Ninety
STORIED
31.1.(b- Thousand Thousand
398 SECURITY iii) 2nd floor/ Roof Top Cum 5.000 18000.001 90000.005
iii) point Zero point Zero
BUILDING (CIVIL
Zero One Zero Five
WORKS)

Eighty-
Five
''2) Form Work/Shuttering (steel)
Six Thousand
PART-G-i : 02- Added rate for additional height in centering, shuttering
Hundred One
STORIED where ever required with adequate bracing, propping etc.
31.2.(b- and Thirty- Hundred
399 SECURITY over a height of 4.0 m, for every additional height of 1 meter Sqm 135.000 631.001 85185.135
i) One point and
BUILDING (CIVIL or part thereof. (only for Gr. floor)
Zero Zero Eighty-
WORKS) Tee beam, L-beam and Rectangular beam
One Five point
i) Ground floor ''
One Three
Five

Five
Seventy-
PART-G-i : 02- Hundred
One
STORIED and
31.2.(b- Thousand
400 SECURITY ii) 1st floor Sqm 120.000 592.001 Ninety- 71040.120
ii) AND Forty
BUILDING (CIVIL Two point
point One
WORKS) Zero Zero
Two
One

Twenty-
One
PART-G-i : 02- Six
Thousand
STORIED Hundred
31.2.(b- Three
401 SECURITY iii) 2nd floor/ Roof Top Sqm 35.000 610.001 and Ten 21350.035
iii) Hundred
BUILDING (CIVIL point Zero
and Fifty
WORKS) Zero One
point Zero
Three Five

PART-G-i : 02- Ten Lakh

Eighteen
STORIED ''Floor/ Roof & Over head water reservoir Slab Eight
31.1.(c- Thousand
402 SECURITY 1) Casting Cum 56.000 18000.001 1008000.056 Thousand
i) point Zero
BUILDING (CIVIL i) Ground floor '' point Zero
Zero One
WORKS) Five Six

PART-G-i : 02- Eight Lakh

Eighteen
STORIED Sixty-Four
31.1.(c- Thousand
403 SECURITY ii) 1st floor Cum 48.000 18000.001 864000.048 Thousand
ii) point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) Four Eight

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 43/80
3/11/24, 2:55 PM View Form
Two Lakh
PART-G-i : 02-
Eighteen Thirty-
STORIED
31.1.(c- Thousand Four
404 SECURITY iii) 2nd floor/ Roof Top Cum 13.000 18000.001 234000.013
iii) point Zero Thousand
BUILDING (CIVIL
Zero One point Zero
WORKS)
One Three

Two Lakh
Twenty-
''2) Form Work/ Shuttering (steel)
Six Two
PART-G-i : 02- Added rate for additional height in centering, shuttering
Hundred Thousand
STORIED where ever required with adequate bracing, propping etc.
31.2.(c- and Fifty- Three
405 SECURITY over a height of 4.0 m, for every additional height of 1 meter Sqm 340.000 654.001 222360.340
i) Four point Hundred
BUILDING (CIVIL or part thereof. (only for Gr. floor)
Zero Zero and Sixty
WORKS) Floor/ Roof & Over head water reservoir Slab
One point
i) Ground floor ''
Three
Four

One Lakh
Eighty-
One
Six
PART-G-i : 02- Thousand
Hundred
STORIED Four
31.2.(c- and
406 SECURITY ii) 1st floor Sqm 295.000 615.001 181425.295 Hundred
ii) Fifteen
BUILDING (CIVIL and
point Zero
WORKS) Twenty-
Zero One
Five point
Two Nine
Five

Forty-Four
Six
PART-G-i : 02- Thousand
Hundred
STORIED Three
31.2.(c- and Thirty-
407 SECURITY iii) 2nd floor/ Roof Top Sqm 70.000 633.001 44310.070 Hundred
iii) Three
BUILDING (CIVIL and Ten
point Zero
WORKS) point Zero
Zero One
Seven

''Reinforced cement concrete works with minimum cement

content relates to mix ratio 1:2:4 having maximum water
cement ratio = 0.40 and minimum f'cr = 30.5 MPa, satisfying
a specified compressive strength f'c = 22 MPa at 28 days on
standard cylinders as per standard practice of Code
ACI/BNBC/ASTM, cement conforming to BDS EN-197-1-
CEM-I, 52.5N (52.5 MPa) / ASTM-C 150 Type ? I, best
quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and
20 mm down well graded stone chips conforming to ASTM C-
33 (Aggregate grading as per table shown in technical
PART-G-i : 02- specification), conducting necessary tests, making and
Seventeen Sixty-Eight
STORIED placing shutter in position maintaining true to plumb, making
32.1.(a- Thousand Thousand
408 SECURITY shutter water-tight properly, placing reinforcement in position; Cum 4.000 17000.001 68000.004
i) point Zero point Zero
BUILDING (CIVIL mixing in standard mixer machine with hopper fed by
Zero One Zero Four
WORKS) standard measuring boxes, casting in forms, compacting by
vibrator machine and curing at least for 28 days, removing
centering-shuttering after specified time approved; including
cost of water, electricity,other charges etc. all complete,
approved and accepted by the Engineer-in-charge. (Rate is
excluding laboratory test fees, the cost of reinforcement and
its fabrication, placing, binding etc. and the cost of shuttering
& centering)
a) Tie beam and lintels
1) Casting
i) Ground floor''

PART-G-i : 02- One Lakh

Seventeen
STORIED Seventy
32.1.(a- Thousand
409 SECURITY ii) 1st floor Cum 10.000 17000.001 170000.010 Thousand
ii) point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) One

PART-G-i : 02-
Seventeen Sixty-Eight
STORIED
32.1.(a- Thousand Thousand
410 SECURITY iii) 2nd floor/ Roof Top Cum 4.000 17000.001 68000.004
iii) point Zero point Zero
BUILDING (CIVIL
Zero One Zero Four
WORKS)

''2) Form Work/Shuttering (steel) Twenty-

Centering and shuttering, including strutting, propping etc. Nine
Five
PART-G-i : 02- (The formwork must be rigid enough both in and out of plane, Thousand
Hundred
STORIED to make the concrete surface true to the designed shape and Eight
32.2.(a- and Forty-
411 SECURITY size by using necessary MS sheets of minimum 16 BWG, Sqm 55.000 543.001 29865.055 Hundred
i) Three
BUILDING (CIVIL angles of minimum size 40 mm x 40 mm x 5 mm, flat bars and Sixty-
point Zero
WORKS) etc.) and removal of form for: Five point
Zero One
Tie beam and lintels Zero Five
i) Ground floor'' Five

Sixty-Four
Five Thousand
PART-G-i : 02-
Hundred Five
STORIED
32.2.(a- and Sixty- Hundred
412 SECURITY ii) 1st floor Sqm 115.000 561.001 64515.115
ii) One point and
BUILDING (CIVIL
Zero Zero Fifteen
WORKS)
One point One
One Five

Five Thirty
PART-G-i : 02- Hundred Thousand
STORIED and One
32.2.(a-
413 SECURITY iii) 2nd floor/ Roof Top Sqm 52.000 579.001 Seventy- 30108.052 Hundred
iii)
BUILDING (CIVIL Nine point and Eight
WORKS) Zero Zero point Zero
One Five Two

414 PART-G-i : 02- 32.1.(b- ''Cornice, false slab, railing, drop wall, fins, parapet etc. Cum 0.500 17000.001 Seventeen 8500.001 Eight
STORIED i) 1) Casting Thousand Thousand
SECURITY i) Ground floor '' point Zero Five
Zero One Hundred

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 44/80
3/11/24, 2:55 PM View Form
BUILDING (CIVIL point Zero
WORKS) Zero One

PART-G-i : 02- Thirty-

Seventeen
STORIED Four
32.1.(b- Thousand
415 SECURITY ii) 1st floor Cum 2.000 17000.001 34000.002 Thousand
ii) point Zero
BUILDING (CIVIL point Zero
Zero One
WORKS) Zero Two

Two Lakh
PART-G-i : 02-
Seventeen Twenty-
STORIED
32.1.(b- Thousand One
416 SECURITY iii) 2nd floor/ Roof Top Cum 13.000 17000.001 221000.013
iii) point Zero Thousand
BUILDING (CIVIL
Zero One point Zero
WORKS)
One Three

Two
Five
PART-G-i : 02- Thousand
Hundred
STORIED ''2) Form Work/Shuttering (steel) Seven
32.2.(b- and Forty-
417 SECURITY Cornice, false slab, railing, drop wall, fins, parapet etc. Sqm 5.000 541.001 2705.005 Hundred
i) One point
BUILDING (CIVIL i) Ground floor'' and Five
Zero Zero
WORKS) point Zero
One
Zero Five

Eleven
Five Thousand
PART-G-i : 02-
Hundred Seven
STORIED
32.2.(b- and Fifty- Hundred
418 SECURITY ii) 1st floor Sqm 21.000 559.001 11739.021
ii) Nine point and Thirty-
BUILDING (CIVIL
Zero Zero Nine point
WORKS)
One Zero Two
One

One Lakh
Five
Nine
PART-G-i : 02- Hundred
Thousand
STORIED and
32.2.(b- Six
419 SECURITY iii) 2nd floor/ Roof Top Sqm 190.000 577.001 Seventy- 109630.190
iii) Hundred
BUILDING (CIVIL Seven
and Thirty
WORKS) point Zero
point One
Zero One
Nine

''Cast-in-place fair-faced concrete works with f'cr=33.5 Mpa

and f'c=25 Mpa at 28 days on standard cylinders by using
75% of OPC and 25% of white cement conforming to BDS
EN-197-1-CEM-I, 52.5N (52.5 MPa) / ASTM-C 150 Type ? I,
best quality Sylhet sand or coarse sand of equivalent F.M.
2.2, 20 mm down and well graded stone chips conforming to
ASTM C-33 (Aggregate grading as per table shown in
technical specification) at mix ratio of 1:1.5:3, adding coloring
pigment admixture (satisfying ASTM C979) as per
architectural design, conforming to the standard practice of
code ACI/BNBC/ASTM including conducting necessary tests,
PART-G-i : 02- Sixty
screening sand and chips through proper sieves, washing, Twenty
STORIED Thousand
33.1.(a- making and placing shutter in position maintaining true to Thousand
420 SECURITY Cum 3.000 20000.001 60000.003 point Zero
i) plumb, making shutter water tight properly, placing point Zero
BUILDING (CIVIL Zero
reinforcement in position, including pouring of concrete in Zero One
WORKS) Three
form, compacting by vibrator machine and curing at least for
28 days, removing centering-shuttering after specified time
approved; including cost of water, electricity, other charges
etc. all complete, approved and accepted by the Engineer-in-
charge.
(Rate is excluding laboratory test fees, the cost of
reinforcement and its fabrication, placing, binding etc. and
the cost of shuttering & centering)
Window top slab
1) Casting
i) Ground floor ''

Three
PART-G-i : 02-
Twenty Lakh
STORIED
33.1.(a- Thousand Twenty
421 SECURITY ii) 1st floor Cum 16.000 20000.001 320000.016
ii) point Zero Thousand
BUILDING (CIVIL
Zero One point Zero
WORKS)
One Six

PART-G-i : 02-
Twenty Eighty
STORIED
33.1.(a- Thousand Thousand
422 SECURITY iii) 2nd floor/ Roof Top Cum 4.000 20000.001 80000.004
iii) point Zero point Zero
BUILDING (CIVIL
Zero One Zero Four
WORKS)

''2) Formwork for making ?fair-faced? surface of the concrete

One Thirty-
as per design, drawing and direction of Engineer-in-charge.
PART-G-i : 02- Thousand Three
(The formwork must be rigid enough both in and out of plane,
STORIED One Thousand
33.2.(a- to make the concrete surface true to the designed shape and
423 SECURITY Sqm 30.000 1110.001 Hundred 33300.030 Three
i) size by using necessary MS sheets of minimum 10 BWG,
BUILDING (CIVIL and Ten Hundred
angles of minimum size 50 mm x 50 mm x 6 mm, flat bars,
WORKS) point Zero point Zero
formwork releasing agent etc.)
Zero One Three
i) Ground floor''

One
One Lakh
Thousand
Eighty
PART-G-i : 02- One
Thousand
STORIED Hundred
33.2.(a- Four
424 SECURITY ii) 1st floor Sqm 160.000 1128.001 and 180480.160
ii) Hundred
BUILDING (CIVIL Twenty-
and Eighty
WORKS) Eight point
point One
Zero Zero
Six
One

425 PART-G-i : 02- 33.2.(a- iii) 2nd floor/ Roof Top Sqm 34.000 1146.001 One 38964.034 Thirty-
STORIED iii) Thousand Eight
SECURITY One Thousand
BUILDING (CIVIL Hundred Nine
WORKS) and Forty- Hundred
Six point and Sixty-
Four point

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 45/80
3/11/24, 2:55 PM View Form
Zero Zero Zero
One Three
Four

Twenty-
Testing work of concrete cylinder [From BUET (BRTC), Four
Four
KUET (CRTS), RUET (DCE), SUST (CRTC) & DUET (DCE)] Thousand
Thousand
PART-G-i : 02- size 150mm dia and 300mm hight for testing compressive Eight
Three
STORIED strength in the laboratory approved by the Engineer including Hundred
Hundred
426 SECURITY 34 making cylinder using steel mould, curing the cylinder to the Set 5.000 4875.001 and 24375.005
and
BUILDING (CIVIL laboratory payment of the testing fees etc. complete as per Seventy-
Seventy-
WORKS) direction of the Engineer in charge. (Payment should be Five point
Five point
made for the cylinders tested whoes strenght attain the Zero Zero
Zero Zero
specified strength of the concrete.) One
Five

''Conducting laboratory test of engineering materials during

construction in progressive manner well fitted with physical
progress of work, by the procuring entity, with all logistic
support supposed to be given by the contractor; where
sampling, sample sending to laboratory and collecting test
results from the samples to laboratory shall be under strict
control and guidance of procuring entity following the norms
elucidated in respective material standards like BDS, EN,
ASTM, ISO, IS etc. and paid to the contractor after complete
and proper doCumentation on: Twenty- Twenty-
1) laboratory test results in original One One
2) evidence of receiving samples in the laboratory in correct Thousand Thousand
PART-G-i : 02-
order Six Six
STORIED
3) forwarding letter of procuring entity addressed to Hundred Hundred
427 SECURITY 35.a Set 1.000 21625.001 21625.001
laboratory for testing and and
BUILDING (CIVIL
4) evidence of receiving ?forwarding letter? with recipients? Twenty- Twenty-
WORKS)
full address and contact number Five point Five point
5) conformation on samples tested that sent in sealed Zero Zero Zero Zero
condition bearing the signature and date of procuring entity One One
6) ensurance doCuments of sealing, signing and sending the
samples.
a) Laboratory Test for Cement [From BUET (BRTC), KUET
(CRTS), RUET (DCE), SUST (CRTC) & DUET (DCE)] of (i)
Compressive Strength (3, 7 and 28 days), (ii) Setting time:
Initial & Final, (iii) Fineness. Once for getting approval of
cement type & brand, per 5000 sft or less of PLA per floor. In
case of brand change, non compliance of test results etc.
contractor will be liable for additional tests and costs.''

b) Laboratory Test for Reber [From BUET (BRTC), KUET Four Four
(CRTS), RUET (DCE), SUST (CRTC) & DUET (DCE)] of (i) Thousand Thousand
PART-G-i : 02- TENSILE STRENGTH TESTS : Yield Strength Ultimate Six Six
STORIED strength % Elongation etc. (ii) Bend. 1 Set of 3 samples. Hundred Hundred
428 SECURITY 35.b 4800 sft or less of PLA/ floor, Minimum 1 Set. additional Set Set 1.000 4625.001 and 4625.001 and
BUILDING (CIVIL for Each change in brand. In case of brand change, non Twenty- Twenty-
WORKS) compliance of test results etc. contractor will be liable for Five point Five point
additional tests and costs. Note : Test for Each diameter Zero Zero Zero Zero
rebar. One One

Twenty- Twenty-
c) Laboratory Test for COARSE AGGREGATE [From BUET
Three Three
PART-G-i : 02- (BRTC), KUET (CRTS), RUET (DCE), SUST (CRTC) &
Thousand Thousand
STORIED DUET (DCE)] of (i) Sieve Analysis, (ii) Unit Weight, (iii)
Two Two
429 SECURITY 35.c Absorption and Specific Gravity. 1 Set of 3 samples /3000 sft Set 1.000 23250.001 23250.001
Hundred Hundred
BUILDING (CIVIL or less of PLA/ Building Unit, Minimum 1 Set. In case of
and Fifty and Fifty
WORKS) brand change, non compliance of test results etc. contractor
point Zero point Zero
will be liable for additional tests and costs.
Zero One Zero One

Ten Ten
Thousand Thousand
d) Laboratory Test for FINE AGGREGATE [From BUET
PART-G-i : 02- Three Three
(BRTC), KUET (CRTS), RUET (DCE), SUST (CRTC) &
STORIED Hundred Hundred
DUET (DCE)] of (i) Sieve Analysis, (ii) Unit Weight. 1 Set of 3
430 SECURITY 35.d Set 1.000 10375.001 and 10375.001 and
samples/ 3000 sft or less of PLA. Minimum 1 Set. In case of
BUILDING (CIVIL Seventy- Seventy-
brand change, non compliance of test results etc. contractor
WORKS) Five point Five point
will be liable for additional tests and costs.
Zero Zero Zero Zero
One One

e) Laboratory Test for BRICKS [From BUET (BRTC), KUET Eighteen Eighteen
PART-G-i : 02- (CRTS), RUET (DCE), SUST (CRTC) & DUET (DCE)] of (i) Thousand Thousand
STORIED Crushing Strength, (ii) Water Absorption, (iii) Unit Weight, (iv) Two Two
431 SECURITY 35.e Size & Shape. 1 Set of 3 samples/ 2500 sft or less of PLA. Set 1.000 18250.001 Hundred 18250.001 Hundred
BUILDING (CIVIL Minimum 1 Set. In case of brand change, non compliance of and Fifty and Fifty
WORKS) test results etc. contractor will be liable for additional tests point Zero point Zero
and costs. Zero One Zero One

Eight Eight
Thousand Thousand
f) Laboratory Test for HOLLOW BRICKS [From BUET
PART-G-i : 02- Three Three
(BRTC), KUET (CRTS), RUET (DCE), SUST (CRTC) &
STORIED Hundred Hundred
DUET (DCE)] of (i) Absoprtion, (ii) Unit Weight. 1 Set of 3
432 SECURITY 35.f Set 1.000 8375.001 and 8375.001 and
samples/ 3000 sft or less of PLA. Minimum 1 Set. In case of
BUILDING (CIVIL Seventy- Seventy-
brand change, non compliance of test results etc. contractor
WORKS) Five point Five point
will be liable for additional tests and costs.
Zero Zero Zero Zero
One One

433 PART-G-i : 02- 36.(i) ''Supplying, fabrication and fixing to detail as per design : Ton 55.000 122000.001 One Lakh 6710000.055 Sixty-
STORIED ribbed or deformed bar reinforcement (excluding laboratory Twenty- Seven
SECURITY test fees) for Reinforced concrete, produced and marked in Two Lakh Ten
BUILDING (CIVIL accordance with BDS ISO 6935-2:2016 (or standard Thousand Thousand
WORKS) subsequently released from BSTI) including straightening point Zero point Zero
and cleaning rust, if any, bending and binding in position with Zero One Five Five
supply of G.I. wires,conducting necessary laboratory tests
etc. (excluding splices or laps) complete in all respect and
accepted by the Engineer-in-charge (Measurement shall be
recorded only on standard mass per unit length of bars, while
dia of bars exceeds its standard)
Grade 400 (B400DWR / B420DWR: complying BDS ISO
6935-2:2016 / ASTM A615) ribbed or deformed bar produced
and marked according to Bangladesh standard, with
minimum yield strength, fy (ReH)= 400 MPa but fy not
exceeding 480 MPa and whatever is the actual yield strength

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 46/80
3/11/24, 2:55 PM View Form
within allowable limit as per BNBC/ ACI 318, the ratio of
ultimate tensile strength fu to yield strength fy, shall be at
least 1.25 and minimum elongation after fracture and
minimum total elongation at maximum force is 17% and 8%
respectively:
i) Ground floor''

Twenty
One Lakh Lakh
PART-G-i : 02-
Twenty- Ninety-
STORIED
Three One
434 SECURITY 36.(ii) ii) 1st floor Ton 17.000 123000.001 2091000.017
Thousand Thousand
BUILDING (CIVIL
point Zero point Zero
WORKS)
Zero One One
Seven

Fourteen
One Lakh
PART-G-i : 02- Lakh
Twenty-
STORIED Eighty-
Four
435 SECURITY 36.(iii) iii) 2nd floor/ Roof Top Ton 12.000 124000.001 1488000.012 Eight
Thousand
BUILDING (CIVIL Thousand
point Zero
WORKS) point Zero
Zero One
One Two

''Supply and use of specified type chemical admixture

delivered from an authorized local agent or manufacturer,
complying with the ASTM C-494 requirements; conforming
the current compliance of the admixture to specification
requirements like physical properties, uniformity and
equivalence in composition etc.; performance (water content,
fresh concrete setting time and compressive strength)
requirements, delivered in sealed water-tight containers
confirming plainly marked product name & type under this
specification, net weight and /or volume, manufacturing and
expiry date, non aggressiveness to environment, aggregates
and metals in concrete etc. and mixing the admixture in non
pre-stressed cement concrete mixture in the field in Four
PART-G-i : 02- Two
accordance with manufacturers recommendation and Thousand
STORIED Hundred
instruction; providing safety provisions in all respects etc. all One
436 SECURITY 37.a Liter 20.000 205.001 and Five 4100.020
complete as per instruction and approved by the Engineer-in- Hundred
BUILDING (CIVIL point Zero
charge. Dose (quantity in milli litres per 50 kg bag cement) point Zero
WORKS) Zero One
and brand/origin/ manufacturer with respect to particular Two
brand of cement and particular stock of aggregates and
method of use to be determined by mix design / trial mix at
the cost of contractor and approved by the Engineer.
(Use of admixture is subjected to prior approval of design
office)
a) Supply and use of water reducing chemical admixture in
concrete, complying ASTM C-494 Type ? A of approved
brand / origin / manufacturer and supplied by only
manufacturer's authorised dealer with certificate of origin.
The admixture is to reduce quantity of mixing water required
for normal workability and to maintain low water-cement
(W/C) ratio, for improved concrete quality assurance.''

Two
b) Supply and use of accelerating chemical admixture in One
PART-G-i : 02- Thousand
concrete, complying ASTM C-494 Type - C of approved Hundred
STORIED Nine
brand/origin/manufacturer and supplied by only and Forty-
437 SECURITY 37.b Liter 20.000 147.001 2940.020 Hundred
manufacturer's authorised dealer with certificate of origin. An Seven
BUILDING (CIVIL and Forty
admixture that is to accelerate the setting time and early point Zero
WORKS) point Zero
strength gain of concrete. Zero One
Two

c) Supply and use of water-reducing high range chemical

Two Five
PART-G-i : 02- admixture in concrete, complying ASTM C-494 Type - F of
Hundred Thousand
STORIED approved brand/origin/manufacturer and supplied by only
and Four
438 SECURITY 37.c manufacturer's authorised dealer with certificate of origin. Liter 20.000 270.001 5400.020
Seventy Hundred
BUILDING (CIVIL The admixture required to produce concrete of consistency
point Zero point Zero
WORKS) by 12% or greater (flowing concrete) and for higher strength
Zero One Two
of concrete.

Supply, fabrication, installation and taking out of 1.2 m hight

temprary safety fencing at diffrent floor during construction
Four
work around the outer periphery of building or around the One Lakh
PART-G-i : 02- Hundred
punch in the floor slab for safety of the worker during Thirty-Two
STORIED and
construction, which shall be made of 10mm dia MS Rod @ Thousand
439 SECURITY 38 Sqm 310.000 426.001 Twenty- 132060.310
450mm C/C both way welded at each point togather with a AND Sixty
BUILDING (CIVIL Six point
12mm Dia MS Rod as top rail drilled anchored to the floor point
WORKS) Zero Zero
and sides as necessary all complete and accepted by the Three One
One
Engineer-in-charge( Salvage materials shall be the
contractors property after completion of work.).

Minimum 12 mm thick cement sand (F.M. 1.2) plaster with Three Four
PART-G-i : 02- neat cement finishing to dado with cement (1:4) up to 150 Hundred Thousand
STORIED mm including washing of sand, finishing the edges and and Seven
440 SECURITY 39 corners and curing at least for 7 days, cost of water, Sqm 12.000 395.001 Ninety- 4740.012 Hundred
BUILDING (CIVIL electricity, scaffolding and other charges etc. all complete in Five point and Forty
WORKS) all respect as per drawing and accepted by the Engineer-in- Zero Zero point Zero
charge. (Cement: CEM-II/B-M) i) Ground floor One One Two

Minimum 12 mm thick cement sand (F.M. 1.2) plaster with

Three One
neat cement finishing to plinth wall with cement (1:4) up to
PART-G-i : 02- Hundred Thousand
150 mm below ground level including washing of sand,
STORIED and Nine
finishing the edges and corners and curing at least for 7
441 SECURITY 40 Sqm 5.000 381.001 Eighty- 1905.005 Hundred
days, cost of water, electricity, scaffolding and other charges
BUILDING (CIVIL One point and Five
etc. all complete in all respect as per drawing and accepted
WORKS) Zero Zero point Zero
by the Engineer-in-charge. (Cement: CEM-II/B-M) i) Ground
One Zero Five
Floor

442 PART-G-i : 02- 41.(i) Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:4) Sqm 1185.000 315.001 Three 373276.185 Three
STORIED with fresh cement to both inner-and outer surface of wall, Hundred Lakh
SECURITY finishing the corner and edges including washing of sand, and Seventy-
BUILDING (CIVIL cleaning the surface, curing at least for 7 days, cost of water, Fifteen Three
WORKS) electricity, scaffolding and other charges etc. all complete in point Zero Thousand
all respect as per drawing and accepted by the Engineer-in- Zero One Two
charge. (Cement: CEM-II/B-M) i) Ground floor Hundred
and
Seventy-

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 47/80
3/11/24, 2:55 PM View Form
Six point
One Eight
Five

Two Lakh
Forty-
PART-G-i : 02- Three Seven
STORIED Hundred Thousand
443 SECURITY 41.(ii) ii) 1st floor Sqm 750.000 330.001 and Thirty 247500.750 Five
BUILDING (CIVIL point Zero Hundred
WORKS) Zero One point
Seven
Five

Two Lakh
Three Ten
PART-G-i : 02-
Hundred Thousand
STORIED
and Forty- Four
444 SECURITY 41.(iii) iii) 2nd floor/ Roof Top Sqm 610.000 345.001 210450.610
Five point Hundred
BUILDING (CIVIL
Zero Zero and Fifty
WORKS)
One point Six
One

Minimum 6 mm thick cement sand (F.M. 1.2) plaster (1:4) Two Lakh
with fresh cement to ceiling, R.C.C. columns, beams, surface Fifty-One
PART-G-i : 02- of stair case, sunshades, cornices, railings, drop wall, Three Thousand
STORIED louvers, fins and finishing the corners and edges including Hundred Three
445 SECURITY 42.(i) washing of sand, cleaning the surface, curing at least for 7 Sqm 835.000 301.001 and One 251335.835 Hundred
BUILDING (CIVIL days, cost of water, electricity, scaffolding and other charges point Zero and Thirty-
WORKS) etc. all complete in all respect as per drawing and accepted Zero One Five point
by the Engineer-in-charge. (Cement: CEM-II/B-M) i) Ground Eight
floor Three Five

Two Lakh
Forty
Three Thousand
PART-G-i : 02-
Hundred Nine
STORIED
and Hundred
446 SECURITY 42.(ii) ii) 1st floor Sqm 765.000 315.001 240975.765
Fifteen and
BUILDING (CIVIL
point Zero Seventy-
WORKS)
Zero One Five point
Seven Six
Five

One Lakh
Ninety-Six
Three
PART-G-i : 02- Thousand
Hundred
STORIED Nine
and Thirty-
447 SECURITY 42.(iii) iii) 2nd floor/ Roof Top Sqm 595.000 331.001 196945.595 Hundred
One point
BUILDING (CIVIL and Forty-
Zero Zero
WORKS) Five point
One
Five Nine
Five

Minimum 12mm thick cement sand (F.M-1.2) water proof,

damp proof, dry and breathable plaster (1:4) with water proof
Izonil Cement (STN-EN -1015-11 , Compressive Strength 34
MPa ,Max depth of water penetration into hardened plaster is Six
PART-G-i : 02- Sixty-Four
< 1 mm) or equivalent compound to wall surface, finishing Hundred
STORIED Thousand
the corner and edges including washing of sand, cleaning the and Forty-
448 SECURITY 43.(i) Sqm 100.000 649.001 64900.100 Nine
surface, scaffolding and curing at least for 3 days, cost of Nine point
BUILDING (CIVIL Hundred
water, electricity and other charges etc. all complete in all Zero Zero
WORKS) point One
respect as per drawing and accepted by the Engineer ?in- One
charge. (Izonil Cement/equivalent compound: Water proof,
damp proof, dry and breathable cement). i) Ground floor
(U.G.W.R.)

Twenty-
Six
Seven
PART-G-i : 02- Hundred
Thousand
STORIED and
One
449 SECURITY 43.(ii) ii) 2nd floor/ Roof Top (O.H.W.R.) Sqm 40.000 679.001 Seventy- 27160.040
Hundred
BUILDING (CIVIL Nine point
and Sixty
WORKS) Zero Zero
point Zero
One
Four

''Installtation of water stopper at movable and immovable

RCC green joints as per following specification.
i) Supplying, fitting and fixing ribbed PVC water stopper with
centre bulb of width approx. 250 mm and approx 9 mm thick
for immovable (non working) RCC joints, having minimum One
One Lakh
PART-G-i : 02- tensile of strength 8.27 MPa (approx. 1200 psi) minimum Thousand
Ten
STORIED ultimate elongation 350%, approximate hardness 50, One
Thousand
450 SECURITY 44 minimum tear resistance 0.0175 kN/mm (100 lbs/inch) at Rm 100.000 1109.001 Hundred 110900.100
Nine
BUILDING (CIVIL RCC construction green joints in basements, approved and and Nine
Hundred
WORKS) in consultation with design office, providing 38 mm x 62 mm point Zero
point One
wooden batten at the top and bottom of water stopper, Zero One
holding in position and keeping the water stopper in true
horizontal or vertical by appropriate means as where
necessary etc; all complete and accepted by the Engineer-in-
charge.''

451 PART-G-i : 02- 45.a ''Supply and use of best quality pliable, cold applied pre- Sqm 5.000 1085.001 One 5425.005 Five
STORIED formed self adhesive rubberized/ bituminous water proofing Thousand Thousand
SECURITY membrane of approved brand / origin / manufacturer from an AND Four
BUILDING (CIVIL authorized local agent or manufacturer having minimum Eighty- Hundred
WORKS) thickness 1.5 mm, lined with 2 ply cross laminated high Five point and
density polyethylene film performances and properties all Zero Zero Twenty-
conforming to ASTM standards and laying, placing, fixing on One Five point
made up firm and dry surfaces free from hollows, sharp Zero Zero
protrusions, contaminates etc. laid over-lap by at least 75 Five
mm along the edges and 125 mm at ends ensuring good
initial bond with the surfaces all complete under the strict
accordance with the manufacturer recommendations and
instructions providing all safety provisions in all respects and
accepted by the Engineer. (supplied by only manufacturer's
authorised dealer with certificate of origin) under following
specification:

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 48/80
3/11/24, 2:55 PM View Form
Backing(HDPE) thickness minimum 0.10mm
Membrane thickness minimum 1.40mm
Total thickness minimum 1.50mm
Cold flexibility greater than (-)200C: ASTM D146
Pliability: ''''No crack'''' tested in ASTM D146
Tensile strength (film only) min 3.50 MPa(35000kN/m2)
testing in ASTM D882
Tensile strength (composite) at least 2.40 MPa or N/mm2
Elongation (composite) min 300%
Cycling over crack at (-) 320C No effect 100 cycles ASTM
C836-89a
Puncture resistance greater than 240N ASTM E 154-88
Resistance to hydrostatic head at least 50m ASTM D5385
Tear resistance min 4.0 MPa (N/mm2)
Adhesion to primed concrete min 4.0 N/mm : ASTM D1000
Water vapor transmission Less than 0.10g/m2 per hour :
ASTM E96
Water absorption in 24 hour Less than 0.33% ASTM D570
Heat stability (+) 900C
Environmental complience to conform: ASTM D543
a) Water-proofing membrane on external surface of primed
vertical or inclined wall /on plastered and primed back-wall
and concrete cast against membrane. (Excluding cost of
back fill/brick wall on back/plaster when membrane laid on
back-wall and concrete cast against membrane which to be
paid as per corresponding items in this schedule)''

Four
Eight Thousand
b) Water-proofing membrane on made up surface below the
PART-G-i : 02- Hundred Four
floor or below the horizontal surfaces with temporary
STORIED and Hundred
protective cover using polystyrene/38 mm thick sand-cement
452 SECURITY 45.b Sqm 5.000 895.001 Ninety- 4475.005 and
mortar in 4:1 /or by equally effective alternative. (Rate is
BUILDING (CIVIL Five point Seventy-
excluding the cost of protective cover which to be paid as per
WORKS) Zero Zero Five point
corresponding items in this schedule)
One Zero Zero
Five

Sixty-Four
Thousand
Eight Two
PART-G-i : 02- Providing aluminium chanel to the nose of sunshade size of
Hundred Hundred
STORIED 19 mm x 19 mm x 19 mm and thickness of 1.2 mm including
and Thirty- and
453 SECURITY 46 groove cutting in plaster, fitting and fixing with bolts and Rm 77.000 835.001 64295.077
Five point Ninety-
BUILDING (CIVIL screws. cost of electricity and other charges all complete and
Zero Zero Five point
WORKS) accepted by the Engineer-in-charge.
One Zero
Seven
Seven

Four
PART-G-i : 02- Thousand
STORIED Making groove in plaster on outside wall upto 38 mm X 6 mm Forty-Five Nine
454 SECURITY 47 size including scaffolding, curing etc. complete as per Rm 110.000 45.001 point Zero 4950.110 Hundred
BUILDING (CIVIL drawing and accepted by the Engineer-in-charge. Zero One and Fifty
WORKS) point One
One

''Supplying, fitting and fixing country made homogeneous

matt finished/ rustic floor tiles complying BDS ISO 13006: One
Four Lakh
2015, water absorption ≤ 0.5%, modulus of rupture (MOR) ≥ Thousand
Sixty-Four
PART-G-i : 02- 27 N/mm2, irrespective of color &/or design, with 20 mm Seven
Thousand
STORIED thick cement sand (F.M. 1.2) mortar (1:4) base and raking out Hundred
Nine
455 SECURITY 48 the joints with white cement including cutting and laying the Sqm 270.000 1722.001 and 464940.270
Hundred
BUILDING (CIVIL tiles in proper way and finishing with care etc. all complete Twenty-
and Forty
WORKS) and accepted by the Engineer-in-charge. (Cement: CEM-II/B- Two point
point Two
M) Zero Zero
Seven
Matt or rustic floor tiles of size 400 mm x 400 mm and below One
i) Ground floor''

''Supplying, fitting and fixing country made GP(Gress

Porcellanto) - glazed or unglazed homogeneous floor tiles
One
complying BDS ISO 13006: 2015, water absorption ≤ 0.5%,
Thousand Eight
PART-G-i : 02- modulus of rupture (MOR) ≥ 27 N/mm2, irrespective of color
Six Thousand
STORIED &/or design, with 20 mm thick cement sand (F.M. 1.2) mortar
Hundred AND Fifty-
456 SECURITY 49.(a-i) (1:4) base and raking out the joints with white cement Sqm 5.000 1611.001 8055.005
and Five point
BUILDING (CIVIL including cutting and laying the tiles in proper way and
Eleven Zero Zero
WORKS) finishing with care etc. all complete and accepted by the
point Zero Five
Engineer-in-charge. (Cement: CEM-II/B-M).
Zero One
a) GP (homogeneous) 300 mm x 600 mm floor tiles
i) Ground Floor ''

One Three
Thousand Lakh
PART-G-i : 02- Six Ninety
STORIED Hundred Thousand
457 SECURITY 49.(a-ii) ii) 1st floor Sqm 240.000 1626.001 and 390240.240 Two
BUILDING (CIVIL Twenty- Hundred
WORKS) Six point and Forty
Zero Zero point Two
One Four

One
Sixty-Five
Thousand
PART-G-i : 02- Thousand
Six
STORIED Six
Hundred
458 SECURITY 49.(a-iii) iii) 2nd floor/ Roof Top (Parapet Top) Sqm 40.000 1641.001 65640.040 Hundred
and Forty-
BUILDING (CIVIL and Forty
One point
WORKS) point Zero
Zero Zero
Four
One

One Forty-Six
Thousand Thousand
PART-G-i : 02-
Three Three
STORIED
''b) GP (homogeneous) 300 mm x 300 mm floor tiles Hundred Hundred
459 SECURITY 49.(b-i) Sqm 34.000 1362.001 46308.034
i) 1st Floor '' and Sixty- and Eight
BUILDING (CIVIL
Two point point Zero
WORKS)
Zero Zero Three
One Four

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 49/80
3/11/24, 2:55 PM View Form
''Supplying, fitting and fixing country made glazed wall tiles
Three
complying BDS ISO 13006: 2015, irrespective of color &/or One
Lakh
design, with 20 mm thick cement sand (F.M. 1.2) mortar (1:3) Thousand
Ninety-
PART-G-i : 02- base and raking out the joints with white cement including Eight
Five
STORIED cutting, laying and hire charge of machine and finishing with Hundred
Thousand
460 SECURITY 50.(i) care etc. including cost of water, electricity and other charges Sqm 210.000 1884.001 and 395640.210
Six
BUILDING (CIVIL complete in all respect and accepted by the Engineer-in- Eighty-
Hundred
WORKS) charge. (Cement: CEM-II/B-M) Four point
and Forty
Wall tiles more than 250 mm x 400 mm & less than or equal Zero Zero
point Two
to 300 mm x 600 mm in sizes, One
One
i) 1st floor''

''Supplying, fitting and fixing country made rustic or matt

finished stair tiles having non-skidding offsets complying Ninety-
BDS ISO 13006: 2015, water absorption ≤ 0.5%, modulus of One One
rupture (MOR) ≥ 27 N/mm2, irrespective of color &/or design, Thousand Thousand
PART-G-i : 02-
with 20 mm thick cement sand (F.M. 1.2) mortar (1:4) base Seven Six
STORIED
and raking out the joints with white cement including cutting, Hundred Hundred
461 SECURITY 51.(i) Sqm 52.000 1763.001 91676.052
laying and hire charge of machine and finishing with care etc. and Sixty- and
BUILDING (CIVIL
including water, electricity and other charges complete in all Three Seventy-
WORKS)
respect and accepted by the Engineer-in-charge. (Cement: point Zero Six point
CEM-II/B-M). Zero One Zero Five
Rustic stair tiles of size 300 mm x 600 mm Two
i) Ground Floor''

Seventy-
One
Four
Thousand
Thousand
PART-G-i : 02- Seven
Six
STORIED Hundred
Hundred
462 SECURITY 51.(ii) ii) 1st floor Sqm 42.000 1778.001 and 74676.042
and
BUILDING (CIVIL Seventy-
Seventy-
WORKS) Eight point
Six point
Zero Zero
Zero Four
One
Two

''Marble stone flooring (For Kitchen Room) with Indian

superior quality marble stone of approved quality complying
accepted National/ International standards, texture and size
with 25 mm thick cement sand (50% F.M. 1.2 and 50% F.M Eight
Thirty-
2.2) mortar (1:2) including placing cement slurry below the Thousand
Four
PART-G-i : 02- stone, cutting the marble stone to desired size, grinding and Six
Thousand
STORIED finishing the edges, setting in position in proper level, filling Hundred
Seven
463 SECURITY 52.(i) the gaps with white cement and colouring pigments including Sqm 4.000 8677.001 and 34708.004
Hundred
BUILDING (CIVIL supplying all necessary equipments/materials and finishing Seventy-
and Eight
WORKS) the top by pumice stone and necessary auxiliary materials Seven
point Zero
and water, electricity and other charges complete in all point Zero
Zero Four
respect and accepted by the Engineer in charge. (Cement: Zero One
CEM-II/B-M)
18 mm thick marble stone flooring
i) 1st floor''

Supplying and setting 12 mm thick Indian standard quality

(Bansowara/ Indian grey/ Indian pink or equivalent) marble
stone of approved quality complying accepted National/ Six Six
International standards, texture and size on wall with 12 mm Thousand Thousand
PART-G-i : 02-
thick cement sand (50% F.M. 1.2 and 50% F.M 2.2) mortar Nine Nine
STORIED
(1:2) including cutting and grinding the marble stone slab/tile, Hundred Hundred
464 SECURITY 53.(i) Sqm 1.000 6944.001 6944.001
setting in position keeping horizontal and vertical alignment and Forty- and Forty-
BUILDING (CIVIL
correct, filling the joints with white cement, cutting and Four point Four point
WORKS)
grinding the top surface, finishing etc including water, Zero Zero Zero Zero
electricity and other charges complete in all respect and One One
accepted by the Engineer-in-charge. (Cement: CEM-II/B-M)
i) 1st floor

Four Two
''Labour cost for making moulding in marble stone as per
PART-G-i : 02- Hundred Thousand
architectural drawing including cutting, grinding, finishing,
STORIED and Eight
supplying necessary equipment etc. complete in all respect
465 SECURITY 54.a Rm 6.000 475.001 Seventy- 2850.006 Hundred
and accepted by the Engineer in Charge. (Cement: CEM-
BUILDING (CIVIL Five point and Fifty
II/B-M).
WORKS) Zero Zero point Zero
a) 18 mm thick marble stone''
One Zero Six

One Lakh
Three Twenty-
PART-G-i : 02- Hundred Seven
STORIED and Thousand
b) 12 mm thick marble stone (For Stair and Parapet Top Tiles
466 SECURITY 54.b Rm 320.000 399.001 Ninety- 127680.320 Six
Moulding)
BUILDING (CIVIL Nine point Hundred
WORKS) Zero Zero and Eighty
One point
Three Two

''Supplying and making door and window frames (Chowkat)

Two Lakh Two Lakh
for all floors in/c wall side grove cutting, moulding by CNC
Fifty-Six Fifty-Six
PART-G-i : 02- machine or any other means with matured seasoned wood of
Thousand Thousand
STORIED required size including painting two coats of coal tar to the
Eight Eight
467 SECURITY 55.a surface in contact with wall, fitting and fixing in position etc. Cum 1.000 256840.001 256840.001
Hundred Hundred
BUILDING (CIVIL all complete and accepted by the Engineer-in-charge. (All
and Forty and Forty
WORKS) sizes of wood are finished).
point Zero point Zero
Frame made from seasoned Chattogram Teak
Zero One Zero One
a) Upto Size 0'-2.5'''' x 0'-6'''' (finished) ''

Two Lakh
Forty-
Thirty-Five
Seven
PART-G-i : 02- Thousand
Thousand
STORIED Seven
b) Size greater than 0'-2.5'' x 0'-6'' and upto 0'-2.5'' x 0'-11'' One
468 SECURITY 55.b Cum 0.200 235719.001 Hundred 47143.800
(finished) Hundred
BUILDING (CIVIL and
and Forty-
WORKS) Nineteen
Three
point Zero
point Eight
Zero One

469 PART-G-i : 02- 56 ''Supplying, fitting and fixing of 38 mm thick well matured Sqm 25.000 13499.001 Thirteen 337475.025 Three
STORIED seasoned (moisture content should be between 12% to 16%) Thousand Lakh
SECURITY solid wood single leaf door shutter having stile section 100m Four Thirty-
x 38mm, top rail section 125mm x 38mm, lock rail section Hundred Seven

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 50/80
3/11/24, 2:55 PM View Form
BUILDING (CIVIL 100mm x 38mm and bottom rail section 225mm x 38mm and Thousand
WORKS) (made from minimum 250mm wide plank) with 4nos 100mm Ninety- Four
long, 3mm thick hinge, 12mm dia 250mm long tower bolt, Nine point Hundred
12mm dia 200mm long socket bolt, 2nos 150mm long Zero Zero and
handle, hinged cleats and buffer blocks. All complete in all One Seventy-
floors and accepted by the Engineer-in-charge. (All sizes of Five point
wood are finished) Zero Two
a) Chattogram Teak (SS Fittings)'' Five

''Supplying, fitting and fixing 38mm thick well matured

seasoned (moisture content should be between 12 to 16%)
Sixty-Six
wooden double leaf panel door shutters having stile and top Fourteen
Thousand
rail section 100mm x 38mm, lock rail section 125mm x 38mm Thousand
PART-G-i : 02- Eight
and bottom rail section 225mm x 38mm, panelling 38mm Eight
STORIED Hundred
thick both sides raised (made from minimum 250mm wide Hundred
470 SECURITY 57 Sqm 4.500 14851.001 66829.504 and
plank) with 4nos 100mm long, 3mm thick hinge, 12mm dia and Fifty-
BUILDING (CIVIL Twenty-
250mm long tower bolt, 12mm dia 200mm long socket bolt, One point
WORKS) Nine point
2nos 150mm long handle, hinged cleats and buffer blocks. Zero Zero
Five Zero
All complete in all floors and accepted by the Engineer-in- One
Four
charge. (All sizes of wood are finished)
For Chattogram Teak (SS Fittings)''

Supplying, fitting, fixing and installation of ordinary type M.S.

gate/ Door (double leaf) of any design and shape with 38 mm
x 38 mm x 6 mm M.S. angle box (made by welding 2 nos. 38
mm x 38 mm x 6 mm angle) outer frame having 25 mm x 50
mm x 25 mm x 5 mm M.S. channel (made by welding 2 nos.
of channel) placed part diagonally after cutting and shaping
as per requirement, part horizontally @ 75 mm c/c, the two Two Lakh
part of Each leaf being separated by a vertical member of 38 Ninety-
mm x 38 mm x 6 mm M.S. box and welded the Each ends of Eight Three
PART-G-i : 02- diagonal and horizontal members properly with the box frame Thousand Thousand
STORIED as per architectural drawing providing full locking Nine Seven
471 SECURITY 58 arrangement on 3 mm thick M.S. plates providing 38 mm x Sqm 33.000 8901.001 Hundred 293733.033 Hundred
BUILDING (CIVIL 38 mm x 6 mm M.S. angle clamps, fitting fixing with the outer and One and Thirty-
WORKS) frame of the gate, the clamp being embedded in R.C.C. point Zero Three
pillars with cement concrete (1:2:4) including. cutting holes Zero One point Zero
and mending good the damages, finishing, curing and where Three
necessary painting two coats with approved quality of Three
synthetic enamel paint over a coat of priming of anticorrosive
paint etc. all complete including making and providing 50 mm
x 6 mm M.S. rail and 38 mm wheel for smooth movement of
the gate etc. all complete as per drawing, design and
accepted by the Engineer-in-charge. (Rate is excluding the
cost of paint).

Manufacturing, supplying, fitting and fixing M.S. folding door

made of 16 gauge ms sheet (both side), 25 mm x 25 mm x
2.5 mm thick M.S. box frame, MS Channel made of 4mm
thick plate, security lock, Cock sheet including cutting the
different M.S. members to required sizes, fabricating,
welding, riveting with required size rivets, providing required Two Lakh
size wheels, pulling handles on both sides, suitable locking Nineteen Sixty-Five
arrangement, electrodes, grease and finally placing the same Thousand Thousand
PART-G-i : 02-
in position in between 2 (two) nos. 50 mm x 50 mm x 6 mm Six Four
STORIED
M.S. channel rail made by welding 2 nos. fitted and fixed at Hundred Hundred
472 SECURITY 59 Sqm 13.500 19661.001 265423.514
top and bottom with R.C.C. members, floors and side wall and Sixty- and
BUILDING (CIVIL
with required Nos. 150 mm to 225 mm long 38 mm x 6 mm One point Twenty-
WORKS)
M.S. flat bar clamps one end welded with the member and Zero Zero Three
the other end including cutting holes and mending good the One point Five
damages by pouring concrete (1:2:4) into the holes and One Four
finishing etc. all complete duco painting 2 (two) coats with
approved best quality over a coat of anticorrosive painting,
both end carriage, including greasing, electrodes, curing etc.
complete as per drawing and design and accepted by the
Engineer-in-charge. (Rate is including the cost of paint)

''Supplying fitting and fixing of aluminium fixed louver as per

the U.S. Architectural Aluminium Manufacturer's Association
(AAMA) standard specification and BDS 1879:2014 having
minimum 1.2 mm thick wall frame (size 76.20 mm, 38.10
mm, 0.564 kg/m),1.5 mm thick louver (size 55.02 mm, 37.39
mm, 0.281 kg/m) and minimum 1.2 mm thick louver outer Twelve Four Lakh
PART-G-i : 02-
section (size 39.67 mm, 15.06 mm) and inner inclined Thousand Ninety-
STORIED
aluminium louver section fixed with above mentioned frame Three Two
473 SECURITY 60 Sqm 40.000 12300.001 492000.040
and all aluminium members will be anodized to aluminium Hundred Thousand
BUILDING (CIVIL
bronze/silver/ss/black colour with a coat not less than 15 point Zero point Zero
WORKS)
micrones in thickness or powder coated to any colour with a Zero One Four
coat not less than 25 micrones in thickness and density of 4
mg per square cm etc. including all accessories, neoprene,
sealant, nuts and bolts etc. complete in all respect as per
drawing and accepted by the Engineer-in-charge.
Powder coated to any colour''

474 PART-G-i : 02- 61 ''Supplying, fitting and fixing of aluminium sliding doors as Sqm 18.000 3794.001 Three 68292.018 Sixty-Eight
STORIED per the U.S. Architectural Aluminium Manufacturer's Thousand Thousand
SECURITY Association (AAMA) standard specification and BDS Seven Two
BUILDING (CIVIL 1879:2014 having minimum 1.2 mm thick outer bottom (size Hundred Hundred
WORKS) 75.50 mm, 17.79 mm, 0.47 kg/m), minimum 1.2 mm thick and and
outer top (size 75.50 mm, 28.50 mm, 0.705 kg/m) ,minimum Ninety- Ninety-
1.2 mm thick shutter top (size 33 mm, 26.80 mm, 0.42 kg/m), Four point Two point
minimum 1.2 mm shutter bottom (size 60 mm, 24 mm, 0.589 Zero Zero Zero One
kg/m), minimum 1.2 mm thick outer side(size 75.50 mm, One Eight
19.90 mm, 0.52 kg/m),minimum 1.2 mm thick shutter lock
(size 49.20 mm, 25.80 mm, 0.543 kg/m), minimum 1.2 mm
thick inter lock (size 34.40 mm, 32.13 mm, 0.562 kg/m)
sections all aluminum members will be anodized to
aluminium bronze/silver/ss/black colour with a coat not less
than 15 micrones in thickness or powder coated to any
colour with a coat not less than 25 micrones in thickness and
density of 4 mg per square cm etc. including all accessories
like handle, sliding door key lock , sliding door wheel, sliding
door mohiar, sliding door neoprene, bolts and nuts including
sealants, keeping provision for fitting 5/6 mm thick glass
including labour charge for fitting of accessories, making
grooves and mending good damages, carriage, and
electricity complete in all respect as per drawing and

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 51/80
3/11/24, 2:55 PM View Form
accepted by the Engineer-in-charge.
Size up to: 2100 mm x 2100 mm
Powder coated to any colour''

Supplying, fitting and fixing of aluminium sliding window as

per the U.S. Architectural Aluminium Manufacturer's
Association (AAMA) standard specification and BDS
1879:2014 having minimum 1.2 mm thick outer bottom (size
75.50 mm, 32mm,0.605 kg/m ), minimum 1.2 mm thick outer
top (size 75.50 mm, 28.50 mm0.705 kg/m), minimum 1.2 mm
thick shutter top (size 33 mm.26.80 mm,0.42 kg/m), minimum
1.2 mm thick shutter bottom (size 60mm, 24.40 mm,0.589
kg/m), minimum 1.2 mm thick outer side (size 75.50 Four
mm,19.90 mm,0.52 kg/m), minimum 1.2 mm thick shutter Thousand Two Lakh
PART-G-i : 02- lock (size 49.20 mm 25.80 mm,0.543 kg/m) and minimum 1.2 Five Fifty-Two
STORIED mm thick inter lock (size 34.40 mm, 32.13 mm,0.562 kg/m) Hundred Thousand
475 SECURITY 62 sections all aluminium members will be anodized to Sqm 55.000 4583.001 and 252065.055 AND
BUILDING (CIVIL aluminium bronze/silver/ss/black colour with a coat not less Eighty- Sixty-Five
WORKS) than 15 micrones in thickness or powder coated to any Three point Zero
colour with a coat not less than 25 micrones in thickness and point Zero Five Five
density of 4 mg per square cm etc. including all accessories Zero One
like sliding door key lock, sliding door wheel, sliding door
mohiar, sliding door neoprene, bolts and nuts including
sealants, keeping provision for fitting 5 mm thick glass
including labour charge for fitting of accessories, making
grooves and mending good damages, carriage, and
electricity complete in all respect as per drawing and
accepted by the Engineer-in-charge. Size up to : 1500mm X
1400mm Powder coated to any colour

''Supplying, fitting and fixing of aluminium fixed composite

window as per the U.S. Architectural Aluminium
Manufacturer's Association (AAMA) standard specification
and BDS 1879:2014 having minimum 1.2 mm thick outer
bottom (size 75.50 mm, 32 mm, 0.605 kg/m), minimum 1.2
mm thick outer top (size 75.50mm, 28.50 mm, 0.705 kg/m),
minimum 1.2 mm thick shutter top (size 33 mm, 26.80 mm,
0.42 kg/m), minimum 1.2 mm thick shutter bottom (size 60
mm, 24.40 mm, 0.589 kg/m), minimum 1.2 mm thick outer
side (size 75.50 mm, 19.90 mm, 0.52 kg/m), minimum 1.2
mm thick shutter lock (size 49.20 mm, 25.80 mm,0.543
kg/m), minimum 1.2 mm thick inter lock (size 34.40 mm,
Two Lakh
32.13 mm,0.562 kg/m ), minimum 1.2 mm thick bottom cover Four
Sixty-
(size 17.40 mm, 31.78 mm, 0.25 kg/m), minimum 1.2 mm Thousand
PART-G-i : 02- Three
thick fixed bottom (size 76.20 mm, 38.10 mm, 0.640 kg/m), Seven
STORIED Thousand
minimum 1.2 mm thick grouve cover ( size 57.15 mm, 15.88 Hundred
476 SECURITY 63 Sqm 55.000 4786.001 263230.055 Two
mm, 0.362 kg/m) and minimum 1.2 mm thick top and side and
BUILDING (CIVIL Hundred
(size 76.20 mm, 38.10 mm, 0.769 kg/m) sections all Eighty-Six
WORKS) and Thirty
aluminium members will be anodized to aluminium point Zero
point Zero
bronze/silver/ss/black colour with a coat not less than 15 Zero One
Five Five
micrones in thickness or powder coated to any colour with a
coat not less than 25 micrones in thickness and density of 4
mg per square cm etc.including all accessories like sliding
door key lock, sliding door wheel, sliding door mohiar, sliding
door neoprene, bolts and nuts including sealants, keeping
provision for fitting 5/6 mm thick glass including labour
charge for fitting of accessories, making grooves and
mending good damages, carriage, and electricity complete in
all respect as per drawing and accepted by the Engineer-in-
charge.
Size up to: 1500 mm x 2100 mm.
Powder coated to any colour''

Three
Two
Lakh
Thousand
''Supplying, fitting and fixing in Aluminium door frames, Sixty-Eight
PART-G-i : 02- Eight
windows, partitions and curtain wall distortion free glass of Thousand
STORIED Hundred
approved quality and shade including cost of fitting fixing all Five
477 SECURITY 64.a Sqm 128.000 2879.001 and 368512.128
necessary accessories etc. complete in all respect as per Hundred
BUILDING (CIVIL Seventy-
drawing and accepted by the Engineer-in-charge. and
WORKS) Nine point
a) 6 mm thick clear tempered glass'' Twelve
Zero Zero
point One
One
Two Eight

One
Six
Thousand
PART-G-i : 02- Thousand
Two
STORIED AND
Hundred
478 SECURITY 64.b b) 5 mm thick ambushed glass Sqm 5.000 1215.001 6075.005 Seventy-
and
BUILDING (CIVIL Five point
Fifteen
WORKS) Zero Zero
point Zero
Five
Zero One

Supplying, fitting and fixing window grill made of 12 mm x 12

mm M.S. solid bar @ 100mm c/c with outer frame of 38 mm Two
Three
x 6mm F.I. bar and 25 mm x 6 mm F.I. bar for clamp as per Thousand
Lakh Ten
PART-G-i : 02- design including fabrication, welding, cost of electricity Eight
Thousand
STORIED workshop charges, labour charges for fitting and fixing grills Hundred
Seven
479 SECURITY 65 in position, local carriage charges, cutting grooves, mending Sqm 110.000 2825.001 and 310750.110
Hundred
BUILDING (CIVIL good the damages, tools and plants, finished with anti- Twenty-
and Fifty
WORKS) corrosive painting (Red-Oxide) etc. complete for all floors Five point
point One
approved and accepted by the Engineer-in-charge. (Total Zero Zero
One
weight per sqm should be approx 19 kg and add or deduct @ One
Tk. 100.00 for each kg/sqm excess or less respectively)

Forty
''Supplying, fitting and fixing of best quality of different dia Thousand
Six
PART-G-i : 02- foreign made aluminium pipe curtain rail for door and window Five
Hundred
STORIED including cutting and fitting-fixing as per required Hundred
and
480 SECURITY 66 measurement and supplying necessary screws, SS clamp, Rm 66.000 614.001 40524.066 and
Fourteen
BUILDING (CIVIL electric drill and rowel plug including charge of electricity etc. Twenty-
point Zero
WORKS) all complete and accepted by the Engineer-in-charge. Four point
Zero One
20 mm dia Aluminium pipe curtain rail'' Zero Six
Six

482 PART-G-i : 02- 67 Exterior premium acrylic emulsion paint of approved best Sqm 5.000 298.001 Two 1490.005 One
STORIED quality and color with high performance against dirt picking Hundred Thousand

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 52/80
3/11/24, 2:55 PM View Form
SECURITY tendency and efflorosence resistence properties along with and Four
BUILDING (CIVIL water resisting properties and resistance properties against Ninety- Hundred
WORKS) fungi, fading and flaking from authorized local agent of the Eight point and Ninety
manufacturer in a sealed container; applying to exterior Zero Zero point Zero
surface with surface preparation including cleaning drying, One Zero Five
making free from dirt, grease, wax, removing all chalked and
scaled materials, fungus, mending good the surface defects
using sand paper and necessary scaffolding; applying
necessary exterior sealer of specified brand on prepared
surface; then applying necessary exterior putty of specified
brand for levelling, spot filling, crack filling and cutting by
sand paper/zero water paper; finally applying 2 coats of
exterior emulsion paint spreading by brush/roller/spray &
necessary scaffolding etc. upto desired finishing, elapsing
specified time for drying or recoating; all complete in all floors
and accepted by the Engineer-in-charge.

Forty-Nine
Five
PART-G-i : 02- Premium French polishing to door and window frames, Thousand
Hundred
STORIED shutter and any other wooden surface by three coats over a Three
and
483 SECURITY 68 coat of priming including putty, cleaning, finishing and Sqm 95.000 519.001 49305.095 Hundred
Nineteen
BUILDING (CIVIL polishing with sand paper etc. all complete in all floors and and Five
point Zero
WORKS) accepted by the Engineer-in-charge. point Zero
Zero One
Nine Five

Standard Duco paint with approved best quality and colour

delivered from authorized local agent of the manufacturer in Two Twenty
PART-G-i : 02- a sealed container, having high water resistance, high Thousand Thousand
STORIED bondibility, flexibility property; using specified brand thinner AND Nine
483 SECURITY 69 applying to metallic or wooden surface by brass/roller/spray Sqm 10.000 2099.001 Ninety- 20990.010 Hundred
BUILDING (CIVIL machine in 2 coats over single coat primer coating including Nine point and Ninety
WORKS) cleaning, drying, making free from dirt, grease, wax, Zero Zero point Zero
removing all chalked and scaled materials, all complete in all One One
floors and accepted by the Engineer-in-charge.

Lacquer Polish (China or equivalent) of Standard design of Two Twenty-

wooden surface Top coat, Thinner,Clear sealer, Color Thousand One
PART-G-i : 02-
pigment etc. complete from authorized local agent of the One Thousand
STORIED
manufacturer in a sealed container, including paint spray Hundred Four
484 SECURITY 70 Sqm 10.000 2143.001 21430.010
machine etc.including surface cleaning from dust, oil or dirt, and Forty- Hundred
BUILDING (CIVIL
smoothening, finishing and polishing with sand paper and Three and Thirty
WORKS)
necessary tools, scaffolding, es etc. all complete in all floors point Zero point Zero
approved and accepted by the Engineer. Zero One One

Approved best quality and colour synthetic polyvinyl

distemper delivered from authorized local agent of the
manufacturer in a sealed container, applying to wall and
Six Lakh
ceiling with surface preparation including cleaning drying,
Ninety-
making free from dirt, grease, wax, removing all chalked and
Two Two
PART-G-i : 02- scaled materials, fungus, mending good the surface defects
Hundred Thousand
STORIED using sand paper and necessary scaffolding; applying 1 coat
and Two
485 SECURITY 71 of interior sealer of specified brand on prepared surface; then Sqm 3250.000 213.001 692253.250
Thirteen Hundred
BUILDING (CIVIL applying 1 coat of interior putty of specified brand for
point Zero and Fifty-
WORKS) levelling, spot filling, crack filling and cutting by sand
Zero One Three
paper/zero water paper; finally applying 2 coats of synthetic
point Two
polyvinyl distemper spreading by brush/roller/spray &
Five
necessary scaffolding etc. upto desired finishing, elapsing
specified time for drying or recoating; all complete in all floors
and accepted by the Engineer-in-charge.

Reetha wash of approved quality by reeta fruit; ceramic Five Lakh

bricks and fair-faced surface preparation including cleaning, Ninety-
drying, making free from dirt, grease, wax, removing all Two
PART-G-i : 02- chalked and scaled materials, fungus, mending good the Four Thousand
STORIED surface defects using sand paper and necessary scaffolding; Hundred Nine
486 SECURITY 72 applying 2 coats of reeta wash on exposed brick surface/fair Sqm 1475.000 402.001 and Two 592951.475 Hundred
BUILDING (CIVIL face surface spreading by brush, 120 water paper, plastic point Zero and Fifty-
WORKS) brush, marking cloths & necessary required materials etc. up Zero One One point
to desired finishing, elapsing specified time for drying or Four
recoating; all complete in all floors and accepted by the Seven
Engineer-in-charge. Five

Silicon based water repellent of approved quality delivered

from authorized local agent of the manufacturer in a sealed
Two
container; surface preparation including cleaning, drying,
Two Thousand
PART-G-i : 02- making free from dirt, grease, wax, removing all chalked and
Hundred Five
STORIED scaled materials, fungus, mending good the surface defects
and Fifty- Hundred
487 SECURITY 73 using sand paper and necessary scaffolding; applying 3 Sqm 10.000 257.001 2570.010
Seven and
BUILDING (CIVIL coats of silicon based water repellent on exposed brick
point Zero Seventy
WORKS) surface/ fair face surface spreading by brush/roller/spray &
Zero One point Zero
necessary scaffolding etc. upto desired finishing, elapsing
One
specified time for drying or recoating; all complete in all floors
and accepted by the Engineer-in-charge.

Flush pointing to brick wall with cement sand (F.M. 1.2) Six
PART-G-i : 02- Two
mortar (1:2) with cement including raking out the joints, Thousand
STORIED Hundred
curing at least for 7 days, cost of water, electricity, scaffolding AND
488 SECURITY 74 Sqm 30.000 201.001 and One 6030.030
and other charges etc. all complete in all respect as per Thirty
BUILDING (CIVIL point Zero
drawing and accepted by the Engineer-in-charge. (Cement: point Zero
WORKS) Zero One
CEM-II/B-M) i) Ground floor Three

One Lakh
Forty-
Rule pointing to brick wall with cement sand (F.M. 1.2) mortar Two
PART-G-i : 02- Eight
(1:2) with fresh cement and raking out the joints, curing at Hundred
STORIED Thousand
least for 7 days, cost of water, electricity, scaffolding and and Thirty-
489 SECURITY 75.(i) Sqm 620.000 239.001 148180.620 One
other charges etc. all complete in all respect as per drawing Nine point
BUILDING (CIVIL Hundred
and accepted by the Engineer-in-charge. (Cement: CEM-II/B- Zero Zero
WORKS) and Eighty
M) i) Ground floor One
point Six
Two

490 PART-G-i : 02- 75.(ii) ii) 1st floor Sqm 330.000 254.001 Two 83820.330 Eighty-
STORIED Hundred Three
SECURITY and Fifty- Thousand
BUILDING (CIVIL Four point Eight
WORKS) Zero Zero Hundred
One and
Twenty

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 53/80
3/11/24, 2:55 PM View Form
point
Three
Three

One Lakh
Thirty-
Two Three
PART-G-i : 02-
Hundred Thousand
STORIED
and Sixty- One
491 SECURITY 75.(iii) iii) 2nd floor/ Roof Top Sqm 495.000 269.001 133155.495
Nine point Hundred
BUILDING (CIVIL
Zero Zero and Fifty-
WORKS)
One Five point
Four Nine
Five

Standard synthetic enamel paint of approved best quality and

Eighty-
colour delivered from authorized local agent of the
Two Nine
manufacturer in a sealed container, having high water
PART-G-i : 02- Hundred Thousand
resistance, high bondibility, flexibility property; using specified
STORIED and Three
brand thinner applying to metallic or wooden surface by
492 SECURITY 76 Sqm 390.000 229.001 Twenty- 89310.390 Hundred
brass/roller/spray in 2 coats over single coat anti-corrosive
BUILDING (CIVIL Nine point and Ten
coating including cleaning, drying, making free from dirt,
WORKS) Zero Zero point
grease, wax, removing all chalked and scaled materials, all
One Three
complete in all floors and accepted by the Engineer-in-
Nine
charge.

Eleven
One
PART-G-i : 02- Supplying, fitting and fixing M.S. flat bar clamp of 150 mm x Thousand
Hundred
STORIED 38 mm x 6 mm size having bifurcated ends to door and Seven
and Thirty-
493 SECURITY 77 window frames with necessary rowel plug, screws etc. Each 90.000 131.001 11790.090 Hundred
One point
BUILDING (CIVIL including cutting grooves in chowkat if necessary etc. all and Ninety
Zero Zero
WORKS) complete and accepted by the Engineer-in-charge. point Zero
One
Nine

One
Three
Thousand
PART-G-i : 02- Hundred
Supplying, fitting and fixing of best quality magnetic door Eight
STORIED and
holder of approved quality including all necessary tools and Hundred
494 SECURITY 78 Each 5.000 374.001 Seventy- 1870.005
accessories all complete and accepted by the Engineer-in- and
BUILDING (CIVIL Four point
charge. Seventy
WORKS) Zero Zero
point Zero
One
Zero Five

One
Six
Thousand
PART-G-i : 02- Thousand
Supplying, fitting and fixing mortice door lock with lever Two
STORIED Two
handle of approved quality including all necessary tools and Hundred
495 SECURITY 79 Each 5.000 1242.001 6210.005 Hundred
accessories etc. all complete approved and accepted by the and Forty-
BUILDING (CIVIL and Ten
Engineer-in-charge. Two point
WORKS) point Zero
Zero Zero
Zero Five
One

Ten
One
PART-G-i : 02- Thousand
Thousand
STORIED Supplying, fitting and fixing rim/round door lock of approved Five
AND Fifty-
496 SECURITY 80 quality including all necessary tools and accessories etc. all Each 10.000 1058.001 10580.010 Hundred
Eight point
BUILDING (CIVIL complete and accepted by the Engineer-in-charge. and Eighty
Zero Zero
WORKS) point Zero
One
One

Four
Thousand
Three
PART-G-i : 02- ''Supplying, fitting and fixing best quality heavy type 19 mm Four
Hundred
STORIED dia and 300 mm long hasp bolt including cutting grooves in Hundred
and Forty-
497 SECURITY 81 door shutter and frames, screws etc. all complete approved Each 13.000 344.001 4472.013 and
Four point
BUILDING (CIVIL and accepted by the Engineer-in-charge. Seventy-
Zero Zero
WORKS) SS Hasp Bolt'' Two point
One
Zero One
Three

Two
Ten
Thousand
Thousand
PART-G-i : 02- Six
Supplying, fitting and fixing hydraulic door closer (big size) of Seven
STORIED Hundred
approved quality including all necessary tools and Hundred
498 SECURITY 82 Each 4.000 2684.001 and 10736.004
accessories etc. all complete and accepted by the Engineer- and Thirty-
BUILDING (CIVIL Eighty-
in-charge. Six point
WORKS) Four point
Zero Zero
Zero Zero
Four
One

One Lakh
Supplying, fitting and fixing MS stair railing with SS hand rail Six Forty-
of standard height with 2 mm thick 62 mm dia SS pipe for Thousand Eight
PART-G-i : 02-
hand-rail, 6 mm thick 4 nos vertical MS plate post in Each Seven Thousand
STORIED
flight, @ 62 mm c/c 12 mm x 12 mm MS solid bar horizontal Hundred Eight
499 SECURITY 83 Sqm 22.000 6768.001 148896.022
10 nos as per drawing, design including carrying, polishing, and Sixty- Hundred
BUILDING (CIVIL
fabricating, welding and fixing with tread by 75 mm long royal Eight point and
WORKS)
bolt with cap etc.all complete and accepted by the Engineer- Zero Zero Ninety-Six
in-charge. One point Zero
Two Two

''Reinforced Cement Concrete Pad (RC Pad) (f'c = 19 MPa,

minimum f'cr = 24 MPa in nominal mix 1 : 2 : 4) with 1/2'''' Ten
Down Graded Picked Jhama Brick Chips, 50% of Medium Thousand Fifty-Two
PART-G-i : 02- Sand of FM 1.2 + 50% of Coarse Sand of FM 2.2 and Five Thousand
STORIED Ordinary Portland Cement ( OPC : CEM-I ) placing Hundred Six
500 SECURITY 84.(i) reinforcement in position; mixing with standard mixer Cum 5.000 10528.001 and 52640.005 Hundred
BUILDING (CIVIL machine with hopper, including cost of water, electricity and Twenty- and Forty
WORKS) other charges etc. all complete approved and accepted by Eight point point Zero
the Engineer. (Rate is excluded of the cost of Zero Zero Zero Five
Reinforcement). One
i) 1st floor ''

501 PART-G-i : 02- 84.(ii) ii) 2nd floor/ Roof Top Cum 22.000 10621.001 Ten 233662.022 Two Lakh
STORIED Thousand Thirty-
SECURITY Six Three
BUILDING (CIVIL Hundred Thousand
WORKS) and Six

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 54/80
3/11/24, 2:55 PM View Form
Twenty- Hundred
One point and Sixty-
Zero Zero Two point
One Zero Two
Two

Seventy-
''Apron:
Nine
Providing apron with 50 mm thick cement concrete (1:2:4)
Thousand
with cement, coarse sand and picked jhama chips including One
PART-G-i : 02- One
breaking chips and one layer brick flat soling at bottom with Thousand
STORIED Hundred
first class or picked jhama bricks including cutting earth for AND Fifty-
502 SECURITY 85 Sqm 75.000 1055.001 79125.075 and
preparation of bed and filling the interstices with local sand Five point
BUILDING (CIVIL Twenty-
(F.M. 0.8) including finishing, dressing, curing at least for 7 Zero Zero
WORKS) Five point
days etc. all complete, including cost of water, electricity, One
Zero
other charges accepted by the Engineer-in-charge. (Cement:
Seven
CEM-II/A-M)''
Five

''Supplying, fitting and fixing 25mm Ctg. Teak wooden

Cabinet of size 8'-0'' x4'-9'' x1'-8'' (finished), 18mm BT
veneered/ BT ply/ BT marine ply board for shelf, 3'' (Finished)
Twenty- Four Lakh
Ctg. Teak wood moulding bit at bottom, and 1'' moulding bit
Four Ninety-
PART-G-i : 02- at top and middle, backside covered by the 18mm garjan Ply
Thousand Seven
STORIED board, 12 nos standard handle for shutter & 6 nos standared
Eight Thousand
503 SECURITY 86 lock, and including screw, SS chain hinge, nails, gums etc. Sqm 20.000 24890.001 497800.020
Hundred Eight
BUILDING (CIVIL and all necessary accessories for fitting and fixing all
and Ninety Hundred
WORKS) complete and accepted by the engineer-in-charge. All Ctg.
point Zero point Zero
teak wood frames must be protected from termites,
Zero One Two
cockroach and other insects. (Rate is excluding cost of
polish/ paint etc. of any type).
Wooden Cabinet with B.T. ply board shutter''

''Supplying, fitting and fixing Kitchen Cabinet (Below Counter)

Depth-1'-8'''' made by 18 mm B.T Veneered board/ B.T. ply
board/ B.T. Marine ply board/ HPL board on 2''''X1.5'''' Eleven
Forty-
(Finished) Ctg. Teak Wooden Frame, making 1'''' x 1'''' Thousand
Seven
PART-G-i : 02- (Finished) Ctg. Teak edge bit around the shutter and Shelf Seven
Thousand
STORIED made of 12mm laminated vinyle board including all Hundred
AND
504 SECURITY 87 necessary accessories for fitting & fixing all complete as per Sqm 4.000 11771.001 and 47084.004
Eighty-
BUILDING (CIVIL design and the direction of the engineer-in-charge. All Seventy-
Four point
WORKS) Ctg.teak wood frames must be protected from termites, One point
Zero Zero
cockroach and other insects. (Rate is excluding cost of Zero Zero
Four
polish/ paint etc. of any type). One
Kitchen Cabinet (Below Counter) made by 18 mm B.T Ply
board''

Supplying anti-termite chemicals named DURS BAN 20 EC /

One Lakh
equivalent and mixing the same with pure water in required
Fifty-Nine
proportion (For DURSBAN 20 EC I Liter in 19 liters of pure
PART-G-i : 02- Five Thousand
water) and spraying the emulsified mixture with hand sprayer
STORIED Hundred Two
over both outside and inside back fill in foundation trenches
505 SECURITY 88 Sqm 316.000 504.001 and Four 159264.316 Hundred
@ 7.50 liters per sqm of the vertical surface area of the
BUILDING (CIVIL point Zero and Sixty-
foundation wall accepted by the Engineer-in-charge. (The
WORKS) Zero One Four point
maximum depth of the back fill to be treated is 500 mm. and
Three One
the measurement for depth should not be given more than
Six
500 mm)

Trench treatment for protection against incoming termites to

the establishment through underground by making trench
around existing building /structures at a required depth of Three Thirty-
PART-G-i : 02-
750 mm from existing level including supplying anti-termite Hundred Four
STORIED
chemicals named DURS BAN 20 EC / equivalent preparing and Forty- Thousand
506 SECURITY 89 Rm 100.000 344.001 34400.100
the solution to be mixed with water in the ratio of chemical: Four point Four
BUILDING (CIVIL
water = 1:19, applying the solution into trench with the help Zero Zero Hundred
WORKS)
of a chemical sprayer in three layers and each layer follows a One point One
250 mm thick back-fill in trench etc all complete and
accepted by the Engineer-in-charge.

Ten
Anti termite treatment of all wooden doorframes, window One
Thousand
PART-G-i : 02- frames, wood paneling etc. by using DURS BAN 20 EC / Hundred
Six
STORIED equivalent emulsion in the ratio of 1 liter. DURS BAN 20 EC and
Hundred
507 SECURITY 90 + 19 liters of Kerosene oil suitable for wood, plywood, Sqm 55.000 194.001 Ninety- 10670.055
and
BUILDING (CIVIL particle board, hard board etc. on both surfaces by brush on Four point
Seventy
WORKS) both surfaces by brush-on-method etc. complete and Zero Zero
point Zero
accepted by the Engineer-in-charge. One
Five Five

Anti-termite treatment of electric telephone wiring system by

Three
inserting a plugging materials (cotton, foam etc.) soaked in
PART-G-i : 02- Hundred Thirteen
anti-termite chemical DURS BAN 20 EC / equivalent to an
STORIED and Thousand
electric switch board point for all floors and spraying the
508 SECURITY 91 Per Board 40.000 326.001 Twenty- 13040.040 AND Forty
emulsion (to be mixed at the ratio of 1 liters DURS BAN 20
BUILDING (CIVIL Six point point Zero
EC + 19 liter of water) to the casings and grooving of electric
WORKS) Zero Zero Four
wirings, telephone cables utility pipes etc. for all floors etc.
One
complete and accepted by the Engineer-in-charge.

509 PART-G-ii : 02- 1 ''Supplying, fitting and fixing of European type country made Each 1.000 15869.001 Fifteen 15869.001 Fifteen
STORIED best quality glazed porcelain combi closet (two piece), Thousand Thousand
SECURITY including plastic seat cover with soft closing ,cistern system, Eight Eight
BUILDING water consumption 6 litre, siphon wash down/siphon jet Hundred Hundred
(SANITARY single or dual flushinging system which reduce water and Sixty- and Sixty-
WORKS) consumption, hygienic glaze in toilet bowl ,glaze in inner Nine point Nine point
waste line, round bowl, outlet range 280~305 mm. Zero Zero Zero Zero
One One
The sanitary ware shall conform BDS1162:2014. The glaze
shall be thoroughly fused to body. The minimum thickness of
body at any section shall be 5 mm. When assembled
together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes
or defects in excess of those listed in BDS standard. The
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the
glaze. There shall be no crazing and no stain on the ware.

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 55/80
3/11/24, 2:55 PM View Form
The materials used for making glaze shall not contain lead
compound. In case of certain coloring oxides used for
making colored glaze, the lead content, if any, shall not
exceed 5 percent of the weight of the glaze materials.
Appliances shall be clearly and indelibly marked at a
prominent place, visible even after the appliances are
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure should be placed in position preparing the base

with cement concrete and with wire mesh or rods if
necessary, in all floors including making holes wherever
required and mending good the damages and fitting, fixing,
finishing, complete with all necessary fittings and connection
approved and accepted by the Engineer- in- charge.

Approx. 668~750 x 356 ~430 mm size, minimum 37 .0 kg of

weight, Equivalent to COTTO :C1390/Stella:Isabella /RAK:
Washington / RAK: Jumairah or similar brand''

''Supplying, fitting and fixing of country made European type

special quality combi closet (one piece) including inbuilt
flushing unit, of white color, including plastic seat cover with
soft closing ,cistern system, water consumption 6 litre, siphon
jet single flushinging system which reduce water
consumption, hygienic glaze in toilet bowl, glaze in inner
waste line, round bowl, outlet range 280~305 mm.

The sanitary ware shall conform BDS1162:2014. The glaze

shall be thoroughly fused to body. The minimum thickness of
body at any section shall be 5 mm. When assembled
together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes
or defects in excess of those listed in BDS standard. The
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
Twenty- Twenty-
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
One One
PART-G-ii : 02- various strength) as per BDS1162:2014 procedure, none of
Thousand Thousand
STORIED the test pieces should suffer any loss of reflectivity on the
Three Three
SECURITY glaze. There shall be no crazing and no stain on the ware.
510 2 Each 1.000 21386.001 Hundred 21386.001 Hundred
BUILDING The materials used for making glaze shall not contain lead
and and
(SANITARY compound. In case of certain coloring oxides used for
Eighty-Six Eighty-Six
WORKS) making colored glaze, the lead content, if any, shall not
point Zero point Zero
exceed 5 percent of the weight of the glaze materials.
Zero One Zero One
Appliances shall be clearly and indelibly marked at a
prominent place, visible even after the appliances are
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure should be placed in position preparing the base

with cement concrete and with wire mesh or rods if
necessary, in all floors including making holes wherever
required and mending good the damages and fitting, fixing,
finishing, complete with all necessary fittings and connection
approved and accepted by the Engineer- in- charge.

Approx. 685~729 X 360~406 mm size, minimum 36.0 kg of

weight; Equivalent RAK: Oasis/Stella: Evana/ Stella: Marlina
or equivalent model''

''Supplying, fitting and fixing of Bangladesh pattern, long pan

with foot-rest.

The sanitary ware shall conform BDS1162:2014. The glaze

shall be thoroughly fused to body. The minimum thickness of
body at any section shall be 5 mm. When assembled
together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes
or defects in excess of those listed in BDS standard. The
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the
Two Two
glaze. There shall be no crazing and no stain on the ware.
PART-G-ii : 02- Thousand Thousand
The materials used for making glaze shall not contain lead
STORIED Seven Seven
compound. In case of certain coloring oxides used for
SECURITY Hundred Hundred
511 3 making colored glaze, the lead content, if any, shall not Each 1.000 2736.001 2736.001
BUILDING and Thirty- and Thirty-
exceed 5 percent of the weight of the glaze materials.
(SANITARY Six point Six point
Appliances shall be clearly and indelibly marked at a
WORKS) Zero Zero Zero Zero
prominent place, visible even after the appliances are
One One
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure should be placed in position preparing the base of

pan with cement mortar (1:4) and with wire mesh or rods, if
necessary in all floors including making holes wherever
required and mending good the damages and fitting, fixing,
finishing etc. complete with all necessary fittings and
connections approved and accepted by the Engineer- in-
charge.

Approx. 540 X 460 X 290 mm size, minimum 13.5 kg of

weight''

512 PART-G-ii : 02- 4 ''Supplying, fitting and fixing of country made glazed vitreous Each 2.000 4286.001 Four 8572.002 Eight
STORIED standing bowl urinal. Thousand Thousand
SECURITY Two Five

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 56/80
3/11/24, 2:55 PM View Form
BUILDING The sanitary ware shall conform BDS1162:2014. The glaze Hundred Hundred
(SANITARY shall be thoroughly fused to body. The minimum thickness of and and
WORKS) body at any section shall be 5 mm. When assembled Eighty-Six Seventy-
together and when examined from a distance of 60 cm, the point Zero Two point
outer surface shall not show to the unaided eye, blemishes Zero One Zero Zero
or defects in excess of those listed in BDS standard. The Two
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the
glaze. There shall be no crazing and no stain on the ware.
The materials used for making glaze shall not contain lead
compound. In case of certain coloring oxides used for
making colored glaze, the lead content, if any, shall not
exceed 5 percent of the weight of the glaze materials.
Appliances shall be clearly and indelibly marked at a
prominent place, visible even after the appliances are
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure should be placed in position after making holes in

walls and floors, providing 32 mm dia plastic waste pipe with
brass coupling up to grading below, 12 mm dia plastic
connection pipe with brass coupling, 12 mm dia brass stop
cock including mending good the damages with cement
mortar (1:4) etc. all complete approved and accepted by the
Engineer- in- charge.

Approx. 300 X 370 X 510 mm size, minimum 11.0 kg of

weight.''

''Supplying, fitting and fixing of European type glazed

porcelain low-down.

The sanitary ware shall conform BDS1162:2014. The glaze

shall be thoroughly fused to body. The minimum thickness of
body at any section shall be 5 mm. When assembled
together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes
or defects in excess of those listed in BDS standard. The
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the
PART-G-ii : 02- glaze. There shall be no crazing and no stain on the ware. Four Four
STORIED The materials used for making glaze shall not contain lead Thousand Thousand
SECURITY compound. In case of certain coloring oxides used for AND AND
513 5 Each 1.000 4017.001 4017.001
BUILDING making colored glaze, the lead content, if any, shall not Seventeen Seventeen
(SANITARY exceed 5 percent of the weight of the glaze materials. point Zero point Zero
WORKS) Appliances shall be clearly and indelibly marked at a Zero One Zero One
prominent place, visible even after the appliances are
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure shoild be placed on walls or directly over water

closet by necessary accessories, rowel plugs, making holes
wherever required and mending good the damages and
fitting, fixing & finishing etc. complete with all necessary
fittings and connections approved and accepted by the
Engineer- in- charge.

Approx. 490 X 190 X 345 mm size, minimum 11.00 kg of

weight''

Five
Eleven
PART-G-ii : 02- Supplying, fitting and fixing of flush valve for urinal on walls Thousand
Thousand
STORIED or directly over water closet with necessary accessories,, Eight
Seven
SECURITY rowel plugs, making holes wherever required and mending Hundred
514 6 Each 2.000 5853.001 11706.002 Hundred
BUILDING good the damages and fitting, fixing & finishing etc. all and Fifty-
and Six
(SANITARY complete with all necessary fittings and connections Three
point Zero
WORKS) approved and accepted by the Engineer- in- charge. point Zero
Zero Two
Zero One

515 PART-G-ii : 02- 7 ''Supplying, fitting and fixing of country made glazed vitreous Each 3.000 4449.001 Four 13347.003 Thirteen
STORIED W/H wash basin excluding pedestal. Thousand Thousand
SECURITY Four Three
BUILDING The sanitary ware shall conform BDS1162:2014. The glaze Hundred Hundred
(SANITARY shall be thoroughly fused to body. The minimum thickness of and Forty- and Forty-
WORKS) body at any section shall be 5 mm. When assembled Nine point Seven
together and when examined from a distance of 60 cm, the Zero Zero point Zero
outer surface shall not show to the unaided eye, blemishes One Zero
or defects in excess of those listed in BDS standard. The Three
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the
glaze. There shall be no crazing and no stain on the ware.
The materials used for making glaze shall not contain lead
compound. In case of certain coloring oxides used for
making colored glaze, the lead content, if any, shall not
exceed 5 percent of the weight of the glaze materials.
Appliances shall be clearly and indelibly marked at a
prominent place, visible even after the appliances are
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 57/80
3/11/24, 2:55 PM View Form
with the BSTI Certification Mark.

The fixure should be placed in position with heavy type C.I.

Brackets. 30 mm dia PVC waste water pipe with brass
coupling (not exceeding 750 mm in length), basin waste with
chain plug including making holes in walls and floors and
fitting with wall, screws and mending good the damages,
finishing etc. all complete approved and accepted by the
Engineer-in-charge.

Over Counter: Approx. 560 X 475 mm size, minimum weight

10.0 kg''

''Supplying of country made glazed vitreous W/H wash basin

of any color including pedestal.

The sanitary ware shall conform BDS1162:2014. The glaze

shall be thoroughly fused to body. The minimum thickness of
body at any section shall be 5 mm. When assembled
together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes
or defects in excess of those listed in BDS standard. The
mean value of water absorption shall not be greater than
0.5% of the ware when dry. When tested with chemical
solutions (Acetic acid, Citric acid, Detergent, Hydrochloric
acid, Sodium hydroxide, Sodium stearate and Sulfuric acid of
various strength) as per BDS1162:2014 procedure, none of
the test pieces should suffer any loss of reflectivity on the Eight Eight
PART-G-ii : 02- glaze. There shall be no crazing and no stain on the ware. Thousand Thousand
STORIED The materials used for making glaze shall not contain lead Four Four
SECURITY compound. In case of certain coloring oxides used for Hundred Hundred
516 8 Each 1.000 8443.001 8443.001
BUILDING making colored glaze, the lead content, if any, shall not and Forty- and Forty-
(SANITARY exceed 5 percent of the weight of the glaze materials. Three Three
WORKS) Appliances shall be clearly and indelibly marked at a point Zero point Zero
prominent place, visible even after the appliances are Zero One Zero One
installed with the following: a) manufacturer's name and/or
registered trademark, b) the number of Bangladesh standard
and c) country of origin. Each product shall also be marked
with the BSTI Certification Mark.

The fixure should be placed in position with heavy type C.I.

Brackets. 30 mm dia PVC waste water pipe with brass
coupling (not exceeding 750 mm in length), basin waste with
chain plug including making holes in walls and floors and
fitting with wall, screws and mending good the damages,
finishing etc. all complete approved and accepted by the
Engineer-in-charge.

Approx. 525 x 415 mm, minimum weight 27.4 kg''

''Supplying, fitting and fixing of best quality double bowl

Twelve Twelve
stainless steel sink with heavy type CI or steel brackets, 12
PART-G-ii : 02- Thousand Thousand
mm dia C.P. chain plug, 40 mm dia C.P. waste, 40 mm dia
STORIED One One
PVC waste pipe with brass coupling (750 mm length)
SECURITY Hundred Hundred
517 9 including making hole in walls and floors and mending good Each 1.000 12170.001 12170.001
BUILDING and and
the damages, finishing etc. all complete approved and
(SANITARY Seventy Seventy
accepted by the Engineer-in-charge.
WORKS) point Zero point Zero
Approx. 1160 x 500 mm size double bowl with sink tray
Zero One Zero One
(Super)''

Two Ten
PART-G-ii : 02- ''Supplying, fitting and fixing of 5 mm thick unframed super
Thousand Thousand
STORIED quality double coated mirror with all necessary fitting
Five Three
SECURITY including making holes in walls and mending good the
518 10 Each 4.000 2590.001 Hundred 10360.004 Hundred
BUILDING damages with cement mortar (1:4) etc. all complete
and Ninety and Sixty
(SANITARY approved and accepted by the Engineer-in-charge.
point Zero point Zero
WORKS) Local Mirror, 5 mm thickness''
Zero One Zero Four

Seven
One
PART-G-ii : 02- Supplying, fitting and fixing of super quality 600 mm x 125 Thousand
Thousand
STORIED mm coloured glass (plate) shelf having 5 mm thickness with Three
Eight
SECURITY fancy C.P. brackets, screws and frames including making Hundred
519 11 Each 4.000 1830.001 Hundred 7320.004
BUILDING holes in walls and mending good the damages with cement and
and Thirty
(SANITARY mortar (1:4) etc. all complete approved and accepted by the Twenty
point Zero
WORKS) Engineer- in- charge. point Zero
Zero One
Zero Four

Three
PART-G-ii : 02- ''Supplying, fitting and fixing of country made best quality Seven
Thousand
STORIED towel rail/ ring/ shelf minimum 20 mm in dia with C.P. holder Hundred
Five
SECURITY including making holes in walls and mending good the and
520 12.a Each 5.000 718.001 3590.005 Hundred
BUILDING damages with cement mortar (1:4) etc. all complete Eighteen
and Ninety
(SANITARY approved and accepted by the Engineer- in- charge. point Zero
point Zero
WORKS) a) C.P. towel ring/ 450 mm long single towel rail'' Zero One
Zero Five

Two
PART-G-ii : 02- Seven Thousand
STORIED Hundred One
SECURITY and Hundred
521 12.b b) 600 mm long C.P. single towel rail Each 3.000 718.001 2154.003
BUILDING Eighteen and Fifty-
(SANITARY point Zero Four point
WORKS) Zero One Zero Zero
Three

One
PART-G-ii : 02- Thousand
''Supplying, fitting and fixing of best quality toilet paper holder Eight
STORIED Six
of standard size including making holes in walls and mending Hundred
SECURITY Hundred
522 13.a good the damages with cement mortar (1:4) etc. all complete Each 2.000 808.001 and Eight 1616.002
BUILDING and
approved and accepted by the Engineer- in- charge. point Zero
(SANITARY Sixteen
a) Porceain toilet paper holder (any color)'' Zero One
WORKS) point Zero
Zero Two

523 PART-G-ii : 02- 13.b b) Stainless steel toilet paper holder Each 1.000 563.001 Five 563.001 Five
STORIED Hundred Hundred
SECURITY and Sixty- and Sixty-
BUILDING Three Three

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 58/80
3/11/24, 2:55 PM View Form
(SANITARY point Zero point Zero
WORKS) Zero One Zero One

Two
PART-G-ii : 02- Four Thousand
''Supplying, fitting and fixing of standard size country made
STORIED Hundred Five
soap tray including making holes in walls and mending good
SECURITY and Hundred
524 14.a the damages with cement mortar (1:4) etc. all complete Each 6.000 420.001 2520.006
BUILDING Twenty and
approved and accepted by the Engineer- in- charge.
(SANITARY point Zero Twenty
a) Porcelain soap tray (any color)''
WORKS) Zero One point Zero
Zero Six

Six Six
PART-G-ii : 02-
Hundred Thousand
STORIED
and Two
SECURITY
525 14.b b) Stainless steel soap tray Each 10.000 628.001 Twenty- 6280.010 Hundred
BUILDING
Eight point and Eighty
(SANITARY
Zero Zero point Zero
WORKS)
One One

''Supplying, fitting and fixing of Push-Up type liquid soap

dispenser to dispense 16 oz (.47 liters) of soap, detergent or
lotion. Unit shall be fabricated of tamper resistant, chrome Six
PART-G-ii : 02- plated plastic, a translucent white polyethylene soap Two Thousand
STORIED container, and a corrosion resistant dispensing valve which Thousand One
SECURITY can provide no more than 5 lbs (22.2 Newtons) pressure and AND Fifty- Hundred
526 15 Each 3.000 2052.001 6156.003
BUILDING unit can be reloaded by unscrewing base from bracket collar, Two point and Fifty-
(SANITARY inverting unit, and unscrewing soap container in which soap Zero Zero Six point
WORKS) will continue to feed properly until empty with a continuously One Zero Zero
visible soap level etc. all complete approved and accepted by Three
the Engineer- in- charge.
Push-Up type liquid soap dispenser (local): super quality''

One
PART-G-ii : 02- ''Supplying, fitting and fixing of floor grating net in traps or in Five
Hundred
STORIED drains including making holes in walls/floors and mending Hundred
and
SECURITY good the damages with cement mortar (1:4) etc. all complete and Sixty-
527 16.a Each 3.000 187.001 Eighty- 561.003
BUILDING approved and accepted by the Engineer- in- charge. of One point
Seven
(SANITARY following type Zero Zero
point Zero
WORKS) a) Approx. 50~75 mm dia stainless steel floor grating net'' Three
Zero One

Three Nine
PART-G-ii : 02-
Hundred Hundred
STORIED
and and
SECURITY
528 16.b b) Approx. 100~125 mm dia stainless steel floor grating net Each 3.000 328.001 Twenty- 984.003 Eighty-
BUILDING
Eight point Four point
(SANITARY
Zero Zero Zero Zero
WORKS)
One Three

Six
Nine Thousand
PART-G-ii : 02-
Hundred Nine
STORIED
and Hundred
SECURITY
529 16.c c) Approx. 125 mm x 125 mm stainless steel floor grating net Each 7.000 991.001 Ninety- 6937.007 and Thirty-
BUILDING
One point Seven
(SANITARY
Zero Zero point Zero
WORKS)
One Zero
Seven

Two
PART-G-ii : 02- Five Thousand
STORIED Hundred Two
SECURITY d) 125 mm dia convex cast iron grating on rain water down and Fifty- Hundred
530 16.d Each 4.000 555.001 2220.004
BUILDING pipe (roof top) Five point and
(SANITARY Zero Zero Twenty
WORKS) One point Zero
Zero Four

Supplying, fitting and fixing of 100 mm inside diameter & wall Nine Forty-One
PART-G-ii : 02-
thickness 2.7 mm - 3.4 mm best quality uPVC rain water Hundred Thousand
STORIED
down pipe fitting, fixed in position with head and shoes, and Seven
SECURITY
531 17 bends, min.20 mm width F.I. Bar clamp and nails, and Each 42.000 993.001 Ninety- 41706.042 Hundred
BUILDING
including all accessories such as round grating/domed roof Three and Six
(SANITARY
grating, bands, sockets approved and accepted by the point Zero point Zero
WORKS)
Engineer- in- charge. Zero One Four Two

''Supplying different inside dia best quality uPVC soil, waste

and ventilation pipe having specific gravity 1.35 - 1.45, wall
Forty-Two
PART-G-ii : 02- thickness 2.5 mm - 3.0 mm, and other physical, chemical, Five
Thousand
STORIED themal, fire resistivity properties etc. as per BSTI approved Hundred
Three
SECURITY manufacturer standards or ASTM, BS/ISO/IS standards and Sixty-
532 18.a Rm 75.000 564.001 42300.075 Hundred
BUILDING fitting and fixing in position with sockets, bends, of uPVC Four point
point Zero
(SANITARY Pipe with all accessories such as Round grating /domed roof Zero Zero
Seven
WORKS) grating bands, sockets etc. approved and accepted by the One
Five
Engineer- in- charge.
a) 50 mm inside dia wall thickness 2.5 mm - 3.0 mm''

One Lakh
Eight
PART-G-ii : 02- Forty
Hundred
STORIED Thousand
and
SECURITY Nine
533 18.b b) 100 mm inside dia wall thickness 3.4 mm - 4.0 mm Rm 160.000 881.001 Eighty- 140960.160
BUILDING Hundred
One point
(SANITARY and Sixty
Zero Zero
WORKS) point One
One
Six

''Supplying, fitting and fixing of G.I. pipe with all special

fittings, such as bends, elbows, sockets, reducing sockets,
Tee, unions, jam-nuts etc. including cutting trenches where Thirteen
PART-G-ii : 02- Four
necessary and fitting the same with earth duly rammed and Thousand
STORIED Hundred
fixing in walls with holder bats and making hole in floors, Two
SECURITY and Forty-
534 19.a walls and consequent mending good the damages etc. all Rm 30.000 441.001 13230.030 Hundred
BUILDING One point
complete in all respects approved and accepted by the and Thirty
(SANITARY Zero Zero
Engineer- in- charge. point Zero
WORKS) One
a) 12.5 mm dia G.I. pipe with wall thickness 2.65 mm, Three
outside diameter min 17.8 mm, weight 1.31 kg/m, can
withstand min 50 kg/cm2 hydraulic pressure.''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 59/80
3/11/24, 2:55 PM View Form
One
Eleven
PART-G-ii : 02- Thousand
Thousand
STORIED One
b) 40 mm dia G.I. pipe with wall thickness 3.25 mm, outside Four
SECURITY Hundred
535 19.b diameter min 46.5 mm, weight 3.83 kg/m, can withstand min Rm 10.000 1146.001 11460.010 Hundred
BUILDING and Forty-
50 kg/cm2 hydraulic pressure. and Sixty
(SANITARY Six point
point Zero
WORKS) Zero Zero
One
One

Four
One Thousand
PART-G-ii : 02-
Thousand Five
STORIED
c) 50 mm dia G.I. pipe with wall thickness 3.65 mm, outside Five Hundred
SECURITY
536 19.c diameter min 57.3 mm, weight 5.38 kg/m, can withstand min Rm 3.000 1504.001 Hundred 4512.003 and
BUILDING
50 kg/cm2 hydraulic pressure. and Four Twelve
(SANITARY
point Zero point Zero
WORKS)
Zero One Zero
Three

Two
PART-G-ii : 02- Thirteen
Thousand
STORIED Thousand
d) 75 -80 mm dia G.I. pipe with wall thickness 3.25 mm, Six
SECURITY AND
537 19.d outside diameter min 86.5 mm, weight 7.22 kg/m, can Rm 5.000 2607.001 Hundred 13035.005
BUILDING Thirty-Five
withstand min 50 kg/cm2 hydraulic pressure. and Seven
(SANITARY point Zero
point Zero
WORKS) Zero Five
Zero One

One Eight
PART-G-ii : 02- ''Supplying and laying uPVC pipe for underground including Thousand Thousand
STORIED fitting, fixing etc. all complete approved and accepted by the Four Four
SECURITY Engineer- in- charge. Hundred Hundred
538 20.a Rm 6.000 1416.001 8496.006
BUILDING a) 150 mm dia with wall thickness 4.5 mm - 6.6 mm uPVC and and
(SANITARY pipe Sixteen Ninety-Six
WORKS) '' point Zero point Zero
Zero One Zero Six

Two Lakh
Two
PART-G-ii : 02- Forty-One
Thousand
STORIED Thousand
One
SECURITY b) 200 mm dia with wall thickness 5.3 mm - 7.8 mm uPVC Nine
539 20.b Rm 115.000 2104.001 Hundred 241960.115
BUILDING pipe Hundred
and Four
(SANITARY and Sixty
point Zero
WORKS) point One
Zero One
One Five

''Supplying different inside dia best quality CPVC pressure

Twenty-
pipe for water supply having specific gravity 1.35 - 1.45, and
PART-G-ii : 02- Two Seven
other physical, chemical, thermal, fire resistivity properties
STORIED Hundred Thousand
etc. as per BSTI approved manufacturer standards or ASTM,
SECURITY and Sixty- Nine
540 21.(i) BS/ISO/IS standards fitting and fixing in position with Rm 105.000 266.001 27930.105
BUILDING Six point Hundred
sockets, bends, with all accessories such as round
(SANITARY Zero Zero and Thirty
grating/domed roof grating, bends, sockets etc. approved
WORKS) One point One
and accepted by the Engineer-in-charge.
Zero Five
i) 12 mm dia wall thickness 2.8 mm - 3.3 mm''

Three Eleven
PART-G-ii : 02-
Hundred Thousand
STORIED
and Six
SECURITY
541 21.(ii) ii) 19 mm dia wall thickness 2.9 mm - 3.4 mm Rm 30.000 387.001 Eighty- 11610.030 Hundred
BUILDING
Seven and Ten
(SANITARY
point Zero point Zero
WORKS)
Zero One Three

PART-G-ii : 02- Four

Forty-Five
STORIED Hundred
Thousand
SECURITY and Fifty-
542 21.(iii) iii) 25 mm dia wall thickness 3.4 mm - 4.0 mm Rm 100.000 454.001 45400.100 Four
BUILDING Four point
Hundred
(SANITARY Zero Zero
point One
WORKS) One

Six Three
PART-G-ii : 02-
Hundred Thousand
STORIED
and Seven
SECURITY
543 21.(iv) iv) 32 mm dia wall thickness 3.6 mm - 4.2 mm Rm 6.000 625.001 Twenty- 3750.006 Hundred
BUILDING
Five point and Fifty
(SANITARY
Zero Zero point Zero
WORKS)
One Zero Six

Twenty
PART-G-ii : 02- Eight Thousand
STORIED Hundred Eight
SECURITY and Sixty- Hundred
544 21.(v) v) 37 mm dia wall thickness 3.7 mm - 4.3 mm Rm 24.000 868.001 20832.024
BUILDING Eight point and Thirty-
(SANITARY Zero Zero Two point
WORKS) One Zero Two
Four

One
Thousand Eighty-
PART-G-ii : 02-
Four Nine
STORIED
Hundred Thousand
SECURITY
545 21.(vi) vi) 50 mm dia wall thickness 3.9 mm - 4.5 mm Rm 60.000 1485.001 and 89100.060 One
BUILDING
Eighty- Hundred
(SANITARY
Five point point Zero
WORKS)
Zero Zero Six
One

''Supplying, fitting and laying of Pipes up to depth of invert Ninety-

Two
dia R.C.C pipe having 1.83 meter in length made of stone Nine
PART-G-ii : 02- Thousand
chips with 40 mm cement joint including all fittings and Thousand
STORIED Eight
specials like plain bend, Tees, reducing sockets, junctions, Eight
SECURITY Hundred
546 22 door bends cowls, anti-siphon, gasket and cement joints, Rm 35.000 2853.001 99855.035 Hundred
BUILDING and Fifty-
making holes in walls and mending good the damages etc. and Fifty-
(SANITARY Three
all complete approved and accepted by the Engineer- in- Five point
WORKS) point Zero
charge. Zero
Zero One
R.C.C pipe of 300 mm dia with thickness 50mm'' Three Five

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 60/80
3/11/24, 2:55 PM View Form
One
PART-G-ii : 02- Four Thousand
STORIED ''Supplying, fitting and fixing of best quality G.I. gate valve Hundred Eight
SECURITY with sealant etc. complete approved and accepted by the and Fifty- Hundred
547 23.(i) Each 4.000 459.001 1836.004
BUILDING Engineer- in- charge. Nine point and Thirty-
(SANITARY i) 12 mm brass gate valve'' Zero Zero Six point
WORKS) One Zero Zero
Four

Two
PART-G-ii : 02- Six Thousand
STORIED Hundred Five
SECURITY and Thirty- Hundred
548 23.(ii) ii) 20 mm brass gate valve Each 4.000 633.001 2532.004
BUILDING Three and Thirty-
(SANITARY point Zero Two point
WORKS) Zero One Zero Zero
Four

Seven
PART-G-ii : 02- Seven
Thousand
STORIED Hundred
Four
SECURITY and Forty-
549 23.(iii) iii) 25 mm brass Gate valve Each 10.000 746.001 7460.010 Hundred
BUILDING Six point
and Sixty
(SANITARY Zero Zero
point Zero
WORKS) One
One

One Four
Thousand Thousand
PART-G-ii : 02-
Two Eight
STORIED
Hundred Hundred
SECURITY
550 23.(iv) iv) 40 mm brass gate valve Each 4.000 1221.001 and 4884.004 and
BUILDING
Twenty- Eighty-
(SANITARY
One point Four point
WORKS)
Zero Zero Zero Zero
One Four

One
Thousand
PART-G-ii : 02- Seven
Eight
STORIED Thousand
Hundred
SECURITY Five
551 23.(v) v) 50 mm brass gate valve Each 4.000 1875.001 and 7500.004
BUILDING Hundred
Seventy-
(SANITARY point Zero
Five point
WORKS) Zero Four
Zero Zero
One

Five Five
PART-G-ii : 02- Thousand Thousand
STORIED One One
SECURITY Hundred Hundred
552 23.(vi) vi) 75 mm brass gate valve Each 1.000 5139.001 5139.001
BUILDING and Thirty- and Thirty-
(SANITARY Nine point Nine point
WORKS) Zero Zero Zero Zero
One One

One
PART-G-ii : 02-
Hundred Seven
STORIED ''Supplying, fitting and fixing of G.I. Union with sealant etc.
and Hundred
SECURITY complete in all respects approved and accepted by the
553 24.(i) Each 4.000 177.001 Seventy- 708.004 and Eight
BUILDING Engineer- in- charge.
Seven point Zero
(SANITARY i) 12 mm dia G.I. Union''
point Zero Zero Four
WORKS)
Zero One

Two
PART-G-ii : 02- Nine
Hundred
STORIED Hundred
and
SECURITY and
554 24.(ii) ii) 20 mm dia G.I. Union Each 4.000 228.001 Twenty- 912.004
BUILDING Twelve
Eight point
(SANITARY point Zero
Zero Zero
WORKS) Zero Four
One

Two Two
PART-G-ii : 02-
Hundred Thousand
STORIED
and Seven
SECURITY
555 24.(iii) iii) 25 mm dia G.I. Union Each 10.000 274.001 Seventy- 2740.010 Hundred
BUILDING
Four point and Forty
(SANITARY
Zero Zero point Zero
WORKS)
One One

One
Four
PART-G-ii : 02- Thousand
Hundred
STORIED Nine
and
SECURITY Hundred
556 24.(iv) iv) 40 mm dia G.I. Union Each 4.000 491.001 Ninety- 1964.004
BUILDING and Sixty-
One point
(SANITARY Four point
Zero Zero
WORKS) Zero Zero
One
Four

Five Two
PART-G-ii : 02-
Hundred Thousand
STORIED
and One
SECURITY
557 24.(v) v) 50 mm dia G.I. Union Each 4.000 526.001 Twenty- 2104.004 Hundred
BUILDING
Six point and Four
(SANITARY
Zero Zero point Zero
WORKS)
One Zero Four

One
Two
PART-G-ii : 02- Thousand
Thousand
STORIED ''Supplying, fitting and fixing of best quality G.I. check valve, Two
Five
SECURITY threaded joint with sealant etc. complete approved and Hundred
558 25.(i) Each 2.000 1270.001 2540.002 Hundred
BUILDING accepted by the Engineer- in- charge. and
and Forty
(SANITARY i) 40 mm brass check valve'' Seventy
point Zero
WORKS) point Zero
Zero Two
Zero One

559 PART-G-ii : 02- 26.(i) ''Supplying, fitting and fixing of best quality G.I. float valve, Each 2.000 1316.001 One 2632.002 Two
STORIED threaded joint Pit valve etc. complete approved and accepted Thousand Thousand
SECURITY Three Six

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 61/80
3/11/24, 2:55 PM View Form
BUILDING by the Engineer- in- charge. Hundred Hundred
(SANITARY i) 40 mm brass float valve'' and and Thirty-
WORKS) Sixteen Two point
point Zero Zero Zero
Zero One Two

Two
''Supplying different inside dia best quality uPVC clean out / Thousand
PART-G-ii : 02- Three
trap having specific gravity 1.35 -1.45 and other physical, One
STORIED Hundred
chemical, themal, fire resistivity properties etc. as per BSTI Hundred
SECURITY and Fifty-
560 27.(i) approved manufacturer standards or ASTM, BS/ISO/IS Each 6.000 354.001 2124.006 and
BUILDING Four point
standards, fitting and fixing in position etc. complete Twenty-
(SANITARY Zero Zero
approved and accepted by the Engineer- in- charge. Four point
WORKS) One
i) 50 mm dia uPVC Y or T - Y Cleanout'' Zero Zero
Six

One
Six
PART-G-ii : 02- Thousand
Hundred
STORIED Three
and
SECURITY Hundred
561 27.(ii) ii) 50 mm dia uPVC ?P? or ?S? trap Each 2.000 693.001 Ninety- 1386.002
BUILDING and
Three
(SANITARY Eighty-Six
point Zero
WORKS) point Zero
Zero One
Zero Two

Six Six
PART-G-ii : 02-
Hundred Thousand
STORIED
and Seven
SECURITY
562 27.(iii) iii) 100 mm dia uPVC Y or T - Y Cleanout Each 10.000 671.001 Seventy- 6710.010 Hundred
BUILDING
One point and Ten
(SANITARY
Zero Zero point Zero
WORKS)
One One

Six
PART-G-ii : 02-
Four Thousand
STORIED
Hundred One
SECURITY
563 27.(iv) iv) 100 mm dia uPVC ?P? or ?S? trap Each 14.000 440.001 and Forty 6160.014 Hundred
BUILDING
point Zero and Sixty
(SANITARY
Zero One point Zero
WORKS)
One Four

''Supplying, fitting and fixing of best quality country made 12

mm bib cock made from copper or copper alloy, chromium
plated.
The faucet conforms BDS EN 200:2009. The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or One
under. The faucet after it has been operated 100000 times it Thousand
PART-G-ii : 02- Fourteen
shall be free from a seat- leakage and shall satisfy the One
STORIED Thousand
reverse flow preventing performance. The inside and outside Hundred
SECURITY AND
564 28 surfaces of the faucet shall be smooth and be free from Each 12.000 1172.001 and 14064.012
BUILDING Sixty-Four
blowholes, fissures, remarkable flows or injurious defects. Seventy-
(SANITARY point Zero
The chromium plating on the faucet shall be of class 2 grade Two point
WORKS) One Two
1. The final coating should be done with chromium of Zero Zero
minimum 0.1 micron. One
The faucet shall be made leak proof and fixing in position
with selected tape etc. all complete approved and accepted
by the Engineer- in- charge.
a) Lever CP Conceal Bib Cock long body with aerator
(Oliver/spoon/delta/decent lever or similar)''

''Supplying, fitting and fixing of best quality surface mounted

or conceal stop cock/angle stop cock (lever or round headed)
with wall flange chromium plated.
The faucet conforms BDS EN 200:2009. The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or One Five
PART-G-ii : 02- under. The faucet after it has been operated 100000 times it Thousand Thousand
STORIED shall be free from a seat- leakage and shall satisfy the One Seven
SECURITY reverse flow preventing performance. The inside and outside Hundred Hundred
565 29.a Each 5.000 1153.001 5765.005
BUILDING surfaces of the faucet shall be smooth and be free from and Fifty- and Sixty-
(SANITARY blowholes, fissures, remarkable flows or injurious defects. Three Five point
WORKS) The chromium plating on the faucet shall be of class 2 grade point Zero Zero Zero
1. The final coating should be done with chromium of Zero One Five
minimum 0.1 micron.
The faucet shall be made leak proof and fixing in position
with selected tape etc. , all complete approved and accepted
by the Engineer- in- charge.
a) 12 mm dia CP Concealed Stop Cock ''

Thirteen
Nine
PART-G-ii : 02- Thousand
Hundred
STORIED Eight
and
SECURITY Hundred
566 29.b b) CP angle stop cock Each 14.000 988.001 Eighty- 13832.014
BUILDING and Thirty-
Eight point
(SANITARY Two point
Zero Zero
WORKS) Zero One
One
Four

''Supplying, fitting and fixing of best quality pillar cock made

from copper or copper alloy, chromium plated materials.
The faucet conforms BDS EN 200:2009. The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or One
Seven
under. The faucet after it has been operated 100000 times it Thousand
PART-G-ii : 02- Thousand
shall be free from a seat- leakage and shall satisfy the Eight
STORIED Five
reverse flow preventing performance. The inside and outside Hundred
SECURITY Hundred
567 30 surfaces of the faucet shall be smooth and be free from Each 4.000 1891.001 and 7564.004
BUILDING and Sixty-
blowholes, fissures, remarkable flows or injurious defects. Ninety-
(SANITARY Four point
The chromium plating on the faucet shall be of class 2 grade One point
WORKS) Zero Zero
1. The final coating should be done with chromium of Zero Zero
Four
minimum 0.1 micron. One
The faucet shall be made leak proof and fixing in position
with selected tape etc. all complete approved and accepted
by the Engineer- in- charge.
CP Single lever moving pillar cock''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 62/80
3/11/24, 2:55 PM View Form
''Supplying, fitting and fixing of best quality sink cock made
from copper or copper alloy, chromium plated.
The faucet conforms BDS EN 200:2009 . The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or One One
under. The faucet after it has been operated 100000 times it Thousand Thousand
PART-G-ii : 02-
shall be free from a seat- leakage and shall satisfy the Six Six
STORIED
reverse flow preventing performance. The inside and outside Hundred Hundred
SECURITY
568 31 surfaces of the faucet shall be smooth and be free from Each 1.000 1685.001 and 1685.001 and
BUILDING
blowholes, fissures, remarkable flows or injurious defects. Eighty- Eighty-
(SANITARY
The chromium plating on the faucet shall be of class 2 grade Five point Five point
WORKS)
1. The final coating should be done with chromium of Zero Zero Zero Zero
minimum 0.1 micron. One One
The faucet shall be made leak proof and fixing in position
with selected tape etc. , all complete approved and accepted
by the Engineer- in- charge.
12 mm CP concealed super quality moving sink cock''

''Supplying, fitting and fixing of best quality CP basin/ sink

mixer.
The faucet conforms BDS EN 200:2009. The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or
Three Three
under. The faucet after it has been operated 100000 times it
PART-G-ii : 02- Thousand Thousand
shall be free from a seat- leakage and shall satisfy the
STORIED Three Three
reverse flow preventing performance. The inside and outside
SECURITY Hundred Hundred
569 32 surfaces of the faucet shall be smooth and be free from Each 1.000 3319.001 3319.001
BUILDING and and
blowholes, fissures, remarkable flows or injurious defects.
(SANITARY Nineteen Nineteen
The chromium plating on the faucet shall be of class 2 grade
WORKS) point Zero point Zero
1. The final coating should be done with chromium of
Zero One Zero One
minimum 0.1 micron.
The faucet shall be made leak proof and fixing in position
with selected tape etc. , all complete approved and accepted
by the Engineer- in- charge.
Moving basin mixer''

''Supplying, fitting and fixing of best quality 20 mm CP

shower mixer.
The faucet conforms BDS EN 200:2009. The faucet tap shall
be free from any leakage, permeation and other
abnormalities. The water hammer value shall be 1.47 Mpa or Seven Seven
under. The faucet after it has been operated 100000 times it Thousand Thousand
PART-G-ii : 02-
shall be free from a seat- leakage and shall satisfy the One One
STORIED
reverse flow preventing performance. The inside and outside Hundred Hundred
SECURITY
570 33 surfaces of the faucet shall be smooth and be free from Each 1.000 7123.001 and 7123.001 and
BUILDING
blowholes, fissures, remarkable flows or injurious defects. Twenty- Twenty-
(SANITARY
The chromium plating on the faucet shall be of class 2 grade Three Three
WORKS)
1. The final coating should be done with chromium of point Zero point Zero
minimum 0.1 micron. Zero One Zero One
The faucet shall be made leak proof and fixing in position
with selected tape etc. , all complete approved and accepted
by the Engineer- in- charge.
CP shower mixture including shower head and faucet''

Two
Thousand Eleven
PART-G-ii : 02-
Two Thousand
STORIED ''Supplying and fitting-fixing Chromium plated (CP) Shower
Hundred Three
SECURITY head. all complete approved and accepted by the Engineer-
571 34 Each 5.000 2276.001 and 11380.005 Hundred
BUILDING in- charge.
Seventy- and Eighty
(SANITARY Moving type 150 mm CP shower head''
Six point point Zero
WORKS)
Zero Zero Zero Five
One

Two
PART-G-ii : 02- One
Thousand
STORIED ''Supplying and fitting-fixing stainless steel hand / push Thousand
AND
SECURITY shower for ablution including holder etc. all complete AND
572 35 Each 2.000 1049.001 2098.002 Ninety-
BUILDING approved and accepted by the Engineer- in- charge. Forty-Nine
Eight point
(SANITARY Moving type push shower'' point Zero
Zero Zero
WORKS) Zero One
Two

One
One Thousand
PART-G-ii : 02-
Hundred Nine
STORIED
''Supplying, fitting and fixing of 12 mm dia connection pipe and Hundred
SECURITY
573 36.a approved and accepted by the Engineer- in- charge. Each 16.000 124.001 Twenty- 1984.016 and
BUILDING
a) 600 mm long plastic flexible lead (connection) pipe'' Four point Eighty-
(SANITARY
Zero Zero Four point
WORKS)
One Zero One
Six

Two
PART-G-ii : 02- Four
Hundred
STORIED Hundred
and
SECURITY and Forty-
574 36.b b) 600 mm long metal cover connection pipe Each 2.000 222.001 Twenty- 444.002
BUILDING Four point
Two point
(SANITARY Zero Zero
Zero Zero
WORKS) Two
One

''Groove cutting in brick work and R.C.C work, including cost

for concealing of water distribution pipe work (12 mm and 20
Three
PART-G-ii : 02- mm dia) in brick wall by cutting groove in wall, lintel, beam
Hundred Thirty-
STORIED etc. by any means carefully without damaging the structure
and Nine
SECURITY and filling the grooves with C.C (4:2:1) after laying of pipe
575 37.a Rm 120.000 325.001 Twenty- 39000.120 Thousand
BUILDING including cost of scaffolding, finishing, curing etc. all
Five point point One
(SANITARY complete approved and accepted by the Engineer- in-
Zero Zero Two
WORKS) charge.
One
a) Groove size 40 mm x 40 mm (For laying 12 mm to 20 mm
dia pipes)''

576 PART-G-ii : 02- 37.b b) Groove size 75 mm x 75 mm (For 25 mm to 40 mm dia Rm 35.000 535.001 Five 18725.035 Eighteen
STORIED pipes) Hundred Thousand
SECURITY and Thirty- Seven
BUILDING Five point Hundred
(SANITARY Zero Zero and
WORKS) One Twenty-

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 63/80
3/11/24, 2:55 PM View Form
Five point
Zero
Three Five

Seven
One
Thousand
PART-G-ii : 02- Thousand
Two
STORIED Eight
Hundred
SECURITY Supply, fitting & fixing of 600 mm dia C.I. man hole cover etc. Hundred
577 38 Each 4.000 1819.001 7276.004 and
BUILDING all complete approved by the Engineer- in- charge. and
Seventy-
(SANITARY Nineteen
Six point
WORKS) point Zero
Zero Zero
Zero One
Four

''Construction of masonry inspection pit with 250 mm thick Four Four

brick work in cement mortar (1:4) including necessary earth Thousand Thousand
PART-G-ii : 02-
work, side filling and one layer brick flat soling, 75 mm thick Six Six
STORIED
(1:3:6) base concrete for making invert channel and 12 mm Hundred Hundred
SECURITY
578 39 thick (1:2) cement plaster with neat finishing etc. all complete Each 1.000 4683.001 and 4683.001 and
BUILDING
up to a depth of 700 mm approved and accepted by the Eighty- Eighty-
(SANITARY
Engineer- in- charge. Three Three
WORKS)
Master-pit of Size: Clear 600 mm x 500 mm and average 750 point Zero point Zero
mm depth for Septic tank.'' Zero One Zero One

''Construction of masonry inspection pits up to a depth of 700

mm with 250 mm thick brick work in cement mortar (1:4)
including 100 mm thick R.C.C. top slab (1:2:4) with 1%
Forty-Two
reinforcement, man-hole cover with locking arrangement
PART-G-ii : 02- Seven Thousand
including necessary earth work, side filling and one brick flat
STORIED Thousand One
soling. 75 mm thick (1:3:6) base concrete for making invert
SECURITY AND Hundred
579 40.a channel and 12 mm thick (1:2) cement plaster with neat Each 6.000 7019.001 42114.006
BUILDING Nineteen and
finishing etc. all complete approved and accepted by the
(SANITARY point Zero Fourteen
Engineer- in- charge.
WORKS) Zero One point Zero
a) Clear 450 mm x 450 mm and depth 450 mm to 600 mm,
Zero Six
average 525 mm for single 150 mm dia R.C.C. pipes and
400 mm PVC pipe with pit cover and 450 mm dia C.I. man-
hole cover.''

One Lakh
Nine
Thirty-
Thousand
PART-G-ii : 02- Three
Five
STORIED b) Clear 525 mm x 525 mm and depth 675 mm to 825 mm, Thousand
Hundred
SECURITY average 750 mm for single 225 mm dia R.C.C. pipes and Three
580 40.b Each 14.000 9526.001 and 133364.014
BUILDING 400 mm PVC pipe with pit cover and 450 mm dia C.I. man- Hundred
Twenty-
(SANITARY hole cover. and Sixty-
Six point
WORKS) Four point
Zero Zero
Zero One
One
Four

Twelve Twelve
PART-G-ii : 02- Thousand Thousand
STORIED c) Clear 600 mm x 600 mm and depth 750 mm to 900 mm, Five Five
SECURITY average 825 mm for single 300 mm dia R.C.C. pipes and Hundred Hundred
581 40.c Each 1.000 12554.001 12554.001
BUILDING 375 mm and 400 mm PVC pipe with pit cover and 450 mm and Fifty- and Fifty-
(SANITARY dia C.I. man-hole cover. Four point Four point
WORKS) Zero Zero Zero Zero
One One

Construction of septic tank of different sizes with walls of

brick work in cement mortar (1:6) having a lining of minimum
125 mm R.C.C cast against the walls as per approved type
plan over a brick flat soling and 150 mm thick reinforced
Three Three
cement concrete flooring (1:2:4) with 125 mm thick walls in
Lakh Lakh
partition and 12 mm thick cement plaster (1:4) with N.C.F. to
Thirty Thirty
PART-G-ii : 02- insides of walls on floor and all around outside walls by 450
Thousand Thousand
STORIED mm height at top including supplying, fitting and fixing of two
Five Five
SECURITY R.C.C. Tees and providing 450 mm dia water sealed heavy
582 41 Each 1.000 330587.001 Hundred 330587.001 Hundred
BUILDING type C.I. manhole cover with locking/unlocking arrangement
and and
(SANITARY and 100 mm thick R.C.C (1:2:4) top slab, including centering,
Eighty- Eighty-
WORKS) shuttering, fabricating, casting and curing etc. complete up to
Seven Seven
required depth including necessary earth work in excavation
point Zero point Zero
and shoring, bailing out water and side filling including the
Zero One Zero One
cost of all materials, operations and incidental charges. etc.
all complete as per type plan approved and accepted by the
Engineer-in-charge (Rate is including cost of reinforcement
and its fabrication, binding and placing). For 200 users

Construction of soak well of different sizes (as per detail

drawing attached in annexure) (medium and large sizes) with
250 mm thick solid brick work and 250 mm honey comb brick
One Lakh One Lakh
work with cement mortar (1:6) as per design over R.C.C.
Fifty-Two Fifty-Two
PART-G-ii : 02- (1:2:4) well curb with 1% reinforcement up to the depth as
Thousand Thousand
STORIED per drawing with 450 mm dia water sealed heavy type. C.I.
Nine Nine
SECURITY manhole cover with locking arrangement, filling the well up to
583 42 Each 1.000 152943.001 Hundred 152943.001 Hundred
BUILDING the required depth with graded khoa including supplying and
and Forty- and Forty-
(SANITARY fabricating M.S. rod, casting, curing including necessary
Three Three
WORKS) earth work in excavation, side filling and bailing out water
point Zero point Zero
including cost of all materials etc. all complete as per
Zero One Zero One
drawing, design approved and accepted by the (Rate is
including cost of reinforcement and its fabrication, binding
and placing) Engineer- in- charge. For 200 users

''Supplying, fitting, fixing of foreign made best quality

Reverse Osmosis Water Purifier (Kent/ Unilever/ Vapor water Twenty- Twenty-
PART-G-ii : 02-
purifier or equivalent brand) for purification of water by Nine Nine
STORIED
reverse osmosis system to have potable water conforming Thousand Thousand
SECURITY
584 43 WHO standard and Bangladesh concentration parameters Each 1.000 29400.001 Four 29400.001 Four
BUILDING
including installation charge, carriage, sundries etc. complete Hundred Hundred
(SANITARY
approved and accepted by the Engineer- in- charge. point Zero point Zero
WORKS)
Water purification capacity: 20 L/hr, minimum storage 8 litre, Zero One Zero One
6 stage purification; RO+UV+MF''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 64/80
3/11/24, 2:55 PM View Form
''Concealed conduit Point wiring (BYM) (without switch):
Concealed conduit wiring for following Point looping at the
switch board with earth terminal with 1C-2x1.5 sqmm PVC
insulated and sheathed stranded cable (BYM) & same size
PVC insulated ECC (BYA) (Green / White color) including
circuit wiring with IC-2x2.5 sqmm PVC insulated and
sheathed stranded cable (BYM) & same size PVC insulated
ECC (BYA) Green / White color through PVC conduit (one
conduit from switch board to common Point on ceiling is One Lakh
One
considered to draw 3 pair of cable ) of reputed manufacturer Fifty-One
PART-G-iii : 02- Thousand
of minimum 25 mm dia & 1.5 mm wall thickness complete Thousand
STORIED Two
with 18 SWG GP sheet / PVC switch board & pull box with Three
SECURITY Hundred
585 1.0 3mm thick ebonite sheet cover, without switch, fixing Point 120.000 1261.001 151320.120 Hundred
BUILDING and Sixty-
materials etc.(without switch) as required including mending and
(ELECTRICAL One point
the damages good. All electrical contacts shall be of brass / Twenty
WORKS) Zero Zero
copper connected through connector or soldering (no twisting point One
One
shall be allowed) and cables shall be manufactured and Two
tested according to relevant IEC / BDS / BS / VDE standards
and as per detailed specification mentioned in Annexure-1.
The work shall be carried out as per direction & approval of
the Engineer. Cable manufacturer(s) must have valid test
certificate (within last seven years ) from internationally
accrediated laboratory (like CPRI, KEMA etc) accepted /
approved by the Engineer.
1.1) Light/ exhaust or wall bracket fan Point''

Twenty-
One
Seven
PART-G-iii : 02- Thousand
Thousand
STORIED Two
Seven
SECURITY Hundred
586 1.2 Fan Point Point 22.000 1261.001 27742.022 Hundred
BUILDING and Sixty-
and Forty-
(ELECTRICAL One point
Two point
WORKS) Zero Zero
Zero Two
One
Two

One Two
PART-G-iii : 02- Thousand Thousand
STORIED Three Six
SECURITY Hundred Hundred
587 1.3 Call bell Point with gang bell push Point 2.000 1333.001 2666.002
BUILDING and Thirty- and Sixty-
(ELECTRICAL Three Six point
WORKS) point Zero Zero Zero
Zero One Two

Concealed wiring (BYM): Concealed conduit wiring with

following PVC insulated and sheathed stranded cable (BYM)
& PVC insulated Green / White coloured ECC wire (BYA)
through PVC conduit of reputed manufacturer complete with
18 SWG GP sheet and pull box with 3mm thick ebonite sheet
cover, fixing materials etc. as required including mending the
damages good. All electrical contacts shall be of brass /
PART-G-iii : 02- Two
copper connected through connector or soldering ( no Thirteen
STORIED Hundred
twisting shall be allowed) and cables shall be manufactured Thousand
SECURITY and Sixty-
588 2.0 and tested according to relevant IEC / BDS / BS / VDE Rm 50.000 261.001 13050.050 AND Fifty
BUILDING One point
standards and as per detailed specification mentioned in point Zero
(ELECTRICAL Zero Zero
Annexure-1. The work shall be carried out as per direction & Five
WORKS) One
approval of the Engineer. Cable manufacturer(s) must have
valid test certificate (within last seven years) from
internationally accrediated laboratory (like CPRI, KEMA etc)
accepted / approved by the Engineer. 2.1) 1C-2x2.5sqmm
(BYM) cable with 2.5sqmm (BYA) ECC wire through PVC
pipe of minimum inner dia 16 mm having wall thickness of
1.5 mm

Three Eleven
PART-G-iii : 02-
Hundred Thousand
STORIED
1C-2x4.0 sqmm (BYM) cable with 4 sqmm (BYA) ECC wire and One
SECURITY
589 2.2 through PVC pipe of minimum inner dia 20 mm having wall Rm 30.000 372.001 Seventy- 11160.030 Hundred
BUILDING
thickness of 1.5 mm Two point and Sixty
(ELECTRICAL
Zero Zero point Zero
WORKS)
One Three

Four Nine
PART-G-iii : 02-
Hundred Thousand
STORIED
1C-2x6.0 sqmm (BYM) cable with 6 sqmm (BYA) ECC wire and Eight
SECURITY
590 2.3 through PVC pipe of minimum inner dia 25 mm having wall Rm 20.000 492.001 Ninety- 9840.020 Hundred
BUILDING
thickness of 1.5 mm Two point and Forty
(ELECTRICAL
Zero Zero point Zero
WORKS)
One Two

''Concealed wiring (NYY) (through PVC conduit): Concealed

conduit wiring with the following PVC insulated and sheathed
stranded cable (NYY) / XLPE insulated and PVC sheathed
stranded cable (2XY) & PVC insulated Green / Yellow bi-
colour ECC wire (BYA) through PVC conduit of reputed
manufacturer complete with fixing materials other
accessories etc. as required including mending the damages
Five Ten
PART-G-iii : 02- good. All electrical contacts shall be of brass / copper
Hundred Thousand
STORIED connected through connector or soldering (no twisting shall
and Five
SECURITY be allowed) and cables shall be manufactured and tested
591 3.0 Rm 20.000 528.001 Twenty- 10560.020 Hundred
BUILDING according to IEC / BS / VDE standards along with relevant
Eight point and Sixty
(ELECTRICAL BDS standard as per detailed specification mentioned in
Zero Zero point Zero
WORKS) Annexure-1. The work shall be carried out as per direction &
One Two
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge.
3.1) 1C-4x2.5 sqmm (NYY / 2XY) with 2.5 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 30 mm having
wall thickness of 1.9 mm.''

592 PART-G-iii : 02- 3.2 1C-4x4 sqmm (NYY / 2XY) with 4 sqmm (BYA) ECC wire Rm 20.000 667.001 Six 13340.020 Thirteen
STORIED through PVC pipe of minimum inner dia 30 mm having wall Hundred Thousand
SECURITY thickness of 1.9 mm and Sixty- Three
BUILDING Seven Hundred
and Forty

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 65/80
3/11/24, 2:55 PM View Form
(ELECTRICAL point Zero point Zero
WORKS) Zero One Two

''SURFACE WIRING (BYM) (THROUGH PVC CONDUIT):

Surface conduit wiring with the following PVC insulated and
sheathed cable (BYM) & Green / Yellow bi-colour PVC
insulated ECC wire (BYA) through PVC conduit of reputed
manufacturer complete with 18 SWG GP sheet pull box with
3 mm thick ebonite sheet cover, fixing materials, other
accessories etc. as required including mending the damages
One Five
PART-G-iii : 02- good. All electrical contacts shall be of brass / copper
Hundred Thousand
STORIED connected through connector or soldering (no twisting shall
and Seven
SECURITY be allowed) and cables shall be manufactured and tested
593 4.0 Rm 30.000 192.001 Ninety- 5760.030 Hundred
BUILDING according to IEC / BS / VDE standards along with relevant,
Two point and Sixty
(ELECTRICAL BDS standard as per detailed specification mentioned in
Zero Zero point Zero
WORKS) Annexure-1. The work shall be carried out as per direction &
One Three
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge.
4.1) 1C-2x1.5 sqmm (BYM) cable with 1.5 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 20 mm having
wall thickness of 1.5 mm''

Seven
PART-G-iii : 02- Two
Thousand
STORIED Hundred
1C-2x2.5sqmm (BYM) cable with 2.5 sqmm (BYA) ECC wire Eight
SECURITY and Sixty-
594 4.2 through PVC pipe of minimum inner dia 25 mm having wall Rm 30.000 261.001 7830.030 Hundred
BUILDING One point
thickness of 1.7 mm and Thirty
(ELECTRICAL Zero Zero
point Zero
WORKS) One
Three

Six
PART-G-iii : 02- Three
Thousand
STORIED Hundred
1C-2x4.0 sqmm (BYM) cable with 4 sqmm (BYA) ECC wire Seven
SECURITY and Thirty-
595 4.3 through PVC pipe of minimum inner dia 25 mm having wall Rm 20.000 338.001 6760.020 Hundred
BUILDING Eight point
thickness of 1.7 mm and Sixty
(ELECTRICAL Zero Zero
point Zero
WORKS) One
Two

1C-2x6.0 sqmm (BYM) cable with 6 sqmm (BYA) ECC wire

through PVC pipe of minimum inner dia 25 mm having wall
thickness of 1.7 mm
1C-2x6.0 sqmm (BYM) cable with 6 sqmm (BYA) ECC wire
through PVC pipe of minimum inner dia 25 mm having wall
thickness of 1.7 mm Eight
PART-G-iii : 02- 1C-2x6.0 sqmm (BYM) cable with 6 sqmm (BYA) ECC wire Four Thousand
STORIED through PVC pipe of minimum inner dia 25 mm having wall Hundred Seven
SECURITY thickness of 1.7 mm and Thirty- Hundred
596 4.4 Rm 20.000 436.001 8720.020
BUILDING 1C-2x6.0 sqmm (BYM) cable with 6 sqmm (BYA) ECC wire Six point and
(ELECTRICAL through PVC pipe of minimum inner dia 25 mm having wall Zero Zero Twenty
WORKS) thickness of 1.7 mm One point Zero
1C-2x6.0 sqmm (BYM) cable with 6 sqmm (BYA) ECC wire Two
through PVC pipe of minimum inner dia 25 mm having wall
thickness of 1.7 mm
1C-2x6.0 sqmm (BYM) cable with 6 sqmm (BYA) ECC wire
through PVC pipe of minimum inner dia 25 mm having wall
thickness of 1.7 mm

''SURFACE WIRING (NYY) (THROUGH PVC CONDUIT) :

Surface conduit wiring with the following PVC insulated and
sheathed stranded cable (NYY) / XLPE insulated and PVC
sheathed stranded cable (2XY) & PVC insulated Green /
Yellow bi-colour , ECC wire (BYA) through PVC conduit of
reputed manufacturer complete with fixing materials, other
accessories etc. as required including mending the damages
One
PART-G-iii : 02- good. All electrical contacts shall be of brass / copper One Lakh
Thousand
STORIED connected through connector or soldering (no twisting shall Twenty
Two
SECURITY be allowed) and cables shall be manufactured and tested Thousand
597 5.0 Rm 100.000 1204.001 Hundred 120400.100
BUILDING according to IEC / BS / VDE standards along with relevant Four
and Four
(ELECTRICAL BDS standard as per detailed specification mentioned in Hundred
point Zero
WORKS) Annexure-1. The work shall be carried out as per direction & point One
Zero One
approval of the Engineer In Charge. Cable manufacturer(s)
must have valid type test certificate (within last seven years)
from internationally accredited laboratory (like CPRI, KEMA
etc.) accepted / approved by the Engineer In Charge .
5.1) 1C-4x10sqmm (NYY / 2XY) with 10 sqmm (BYA) ECC
wire through PVC pipe of minimum inner dia 40 mm having
wall thickness of 2.2 mm''

Thirty-
One
Four
PART-G-iii : 02- Thousand
Thousand
STORIED Seven
1C-4x16sqmm (NYY / 2XY) with 16 sqmm (BYA) ECC wire Two
SECURITY Hundred
598 5.2 through PVC pipe of minimum inner dia 40 mm having wall Rm 20.000 1711.001 34220.020 Hundred
BUILDING and
thickness of 2.2 mm and
(ELECTRICAL Eleven
Twenty
WORKS) point Zero
point Zero
Zero One
Two

''UNIVERSAL COMBINED SWITCH SOCKET OUTLET

(SURFACE/CONCEALED TYPE): Providing & fixing 250 volt
single phase universal combined switch socket outlet
(surface / concealed type) Manufactured/ Assembled and
tested in accordance with IEC / VDE / NEMA / BS / JIS along Eighteen
PART-G-iii : 02- Nine
with relevant BDS IEC standards mounted on required size Thousand
STORIED Hundred
18 SWG galvanized plain sheet board / plastic board (self- Eight
SECURITY and Forty-
599 6.a extinguishing 650 degree centigrade) of 76.2 mm. (3'''') Each 20.000 942.001 18840.020 Hundred
BUILDING Two point
depth. Sample to be approved by the Engineer-in- and Forty
(ELECTRICAL Zero Zero
charge.Manufacturer shall have certificate of standard which point Zero
WORKS) One
they follow. Two
a) 13 / 15 / 16 / 20 Amps.
Made in HONGKONG / MALAYSIA / SINGAPORE / S
KOREA / THAILAND
''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 66/80
3/11/24, 2:55 PM View Form
Seven
PART-G-iii : 02- Seven
Thousand
STORIED Hundred
One
SECURITY 5 - 10 Amps. Made in HONGKONG / MALAYSIA / and
600 6.b Each 10.000 715.001 7150.010 Hundred
BUILDING SINGAPORE / S KOREA / THAILAND Fifteen
and Fifty
(ELECTRICAL point Zero
point Zero
WORKS) Zero One
One

''GANG SWITCH: Providing & fixing 250 volts. 5 / 6 amps Fourteen

(minimum) concealed type following switch / switch socket Thousand
PART-G-iii : 02- Two
manufactured and tested in accordance with relevant IEC / Three
STORIED Hundred
VDE / NEMA / BS / JIS standards mounted on required size Hundred
SECURITY and
601 7.0 18 SWG galvanized plain sheet / PVC board (Self- Each 66.000 218.001 14388.066 and
BUILDING Eighteen
extinguishing 650oC) of 76.2 mm (3'''') depth. All electrical Eighty-
(ELECTRICAL point Zero
contacts shall be of brass / copper. Made in HONGKONG / Eight point
WORKS) Zero One
MALAYSIA / SINGAPORE / S KOREA / THAILAND Zero Six
7.1) One gang switch'' Six

One
Three Thousand
PART-G-iii : 02-
Hundred Eight
STORIED
and Hundred
SECURITY
602 7.2 Two gang switch Each 5.000 375.001 Seventy- 1875.005 and
BUILDING
Five point Seventy-
(ELECTRICAL
Zero Zero Five point
WORKS)
One Zero Zero
Five

Four
PART-G-iii : 02- Five Thousand
STORIED Hundred One
SECURITY and Hundred
603 7.3 Three gang switch Each 8.000 514.001 4112.008
BUILDING Fourteen and
(ELECTRICAL point Zero Twelve
WORKS) Zero One point Zero
Zero Eight

Three
PART-G-iii : 02- Seven Thousand
STORIED Hundred Eight
SECURITY and Sixty- Hundred
604 7.4 Four gang switch Each 5.000 763.001 3815.005
BUILDING Three and
(ELECTRICAL point Zero Fifteen
WORKS) Zero One point Zero
Zero Five

One
PART-G-iii : 02- Five
Thousand
STORIED Hundred
AND
SECURITY and
605 7.5 One gang switch & one 5 amps. 2-pin socket combined. Each 2.000 512.001 1024.002 Twenty-
BUILDING Twelve
Four point
(ELECTRICAL point Zero
Zero Zero
WORKS) Zero One
Two

One Twenty-
Thousand Six
PART-G-iii : 02-
One Thousand
STORIED
''Gang type Fan Regulator Hundred One
SECURITY
606 8 Made in HONGKONG / MALAYSIA / SINGAPORE / S Each 22.000 1187.001 and 26114.022 Hundred
BUILDING
KOREA / THAILAND '' Eighty- and
(ELECTRICAL
Seven Fourteen
WORKS)
point Zero point Zero
Zero One Two Two

Four Four
PART-G-iii : 02-
Hundred Hundred
STORIED
''Gang type Calling bell Push and and
SECURITY
607 9 Made in MALAYSIA / THAILAND / SINGAPORE / Each 1.000 482.001 Eighty- 482.001 Eighty-
BUILDING
HONGKONG / S.KOREA. .'' Two point Two point
(ELECTRICAL
Zero Zero Zero Zero
WORKS)
One One

PART-G-iii : 02-
Six Six
STORIED
''Gang type Telephone / TV Socket Hundred Hundred
SECURITY
608 10 Made in HONGKONG / MALAYSIA / SINGAPORE / S Each 1.000 609.001 and Nine 609.001 and Nine
BUILDING
KOREA / THAILAND '' point Zero point Zero
(ELECTRICAL
Zero One Zero One
WORKS)

PART-G-iii : 02- Seven Seven

STORIED Hundred Hundred
CALL BELL: Providing & fixing ding dong 250 V grade call
SECURITY and Fifty- and Fifty-
609 11 bell on prepared board including required length of PVC twin Each 1.000 758.001 758.001
BUILDING Eight point Eight point
flexible cord etc. complete.
(ELECTRICAL Zero Zero Zero Zero
WORKS) One One

''CEILLING FAN: Supplying & fixing AC capacitor type ceiling

fan (without regulator) of following specifications and sizes
complete with minimum 305 mm (1 ft) long and 0.75 -1.0''''
dia, 2.3 mm thickness MS pipe down rod, tempered cast
aluminum blades, 2.5 µf 400V AC capacitor, canopy, double
Z ball bearing, best quality silicon sheet core, best quality
Three Seventy-
copper made super enamel wire, aluminum alloyed casting
PART-G-iii : 02- Thousand Eight
body / metal body having safety pin with powder coated heat
STORIED Nine Thousand
/ docu paint as required as per BDS 818 etc. connecting PVC
SECURITY Hundred Two
610 12.a wire complete as required. Each 20.000 3914.001 78280.020
BUILDING and Hundred
Rated voltage : 230 volts
(ELECTRICAL Fourteen and Eighty
Rated frequency : 50 Hz
WORKS) point Zero point Zero
Rated speed : 300 rpm ± 5 %
Zero One Two
Service value : Minimum 3.5 m3 / min / watt
Temperature rise : Maximum 55ºC
Class of Insulation : Minimum E
Noise level : Maximum 60 dB at a distance of 1 meter.
a) 1442 mm. (56'''') Sweep
Input power : Maximum 65 watt.''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 67/80
3/11/24, 2:55 PM View Form
Three
Seven
PART-G-iii : 02- Thousand
Thousand
STORIED Six
Two
SECURITY ''1220 mm. (48'''') Sweep Hundred
611 12.b Each 2.000 3620.001 7240.002 Hundred
BUILDING Input power : Maximum 65 watt.'' and
and Forty
(ELECTRICAL Twenty
point Zero
WORKS) point Zero
Zero Two
Zero One

Three
One Thousand
PART-G-iii : 02-
Hundred Seven
STORIED FAN CLAMP: Providing & fixing box type fan clamp made of
and Hundred
SECURITY 25.4 mm. x 6.35 mm. (1''x ¼'') MS flat bar with 15.87 mm.
612 13 Each 22.000 172.001 Seventy- 3784.022 and
BUILDING (5/8'') dia MS hook including necessary bolts, nuts etc. as
Two point Eighty-
(ELECTRICAL required as per sample approved by the Engineer.
Zero Zero Four point
WORKS)
One Zero Two
Two

One
''EXHAUST FAN: Providing and fixing of following axial flow Seven
Thousand
PART-G-iii : 02- AC capacitor type wall mounted exhaust fan complete with Thousand
Five
STORIED blade, steel frame standard wall louver shutter, PVC Nine
Hundred
SECURITY insulated connecting wire etc. complete as required including Hundred
613 14 Each 5.000 1583.001 and 7915.005
BUILDING cutting wall and mending good the damages as per direction and
Eighty-
(ELECTRICAL of the Engineer. Fifteen
Three
WORKS) 12'''' Exhaust fan plastic body (foreign made accepted / point Zero
point Zero
approved by the Engineer).'' Zero Five
Zero One

''SPOT/PANEL LED LIGHT FITTINGS Supply & fixing

spot/Panel LED light fittings of following specifications:
Luminous efficacy:
i)For Spot/Bracket LED Light Fittings: 80 lm/W (min),
ii)For Panel/Tube Light Fittings: 100 lm/W (min)
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :
i) For Residential building Ra≥80
ii) For office and other types of buildings 70≤Ra< 85
Driver: Should be of IEC standard such as
MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or Ten
PART-G-iii : 02- One
equivalent Thousand
STORIED Thousand
LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE Six
SECURITY AND
614 15 / BRIDGELUX or equivalent. Each 10.000 1068.001 10680.010 Hundred
BUILDING Sixty-Eight
Colour temperature : 3500K-6500K (Warm-White) and Eighty
(ELECTRICAL point Zero
Model & sample to be accepted / approved by the Engineer- point Zero
WORKS) Zero One
in-charge (with 2 years warranty). One
Material: Alu Aloy, Acrylic
Gloria Cat No-GSDL-514
Energy + cat No-EPPLLED-2005
Cosmo cat no-BDTCL-LSSPL-01
Adex-AD SDL 830/840/865
Asha Cat no- ACS LPL-1460
Megaman-MXTL1013-F-PS
Walton:WLED-DSPLS-225-ULor equivalent square panel
light fittings.
18 W, Approximate Size - 221 mm(Each side)''

''Material: Alu Aloy, Acrylic

Gloria Cat No-GSDL-514
One
PART-G-iii : 02- Energy + cat No-EPPLLED-2005 Thirteen
Thousand
STORIED Cosmo cat no-BDTCL-LSSPL-01 Thousand
Three
SECURITY Adex-AD SDL 830/840/865 Five
615 16 Each 10.000 1350.001 Hundred 13500.010
BUILDING Asha Cat no- ACS LPL-1460 Hundred
and Fifty
(ELECTRICAL Megaman-MXTL1013-F-PS point Zero
point Zero
WORKS) Walton:WLED-DSPLS-225-ULor equivalent square panel One
Zero One
light fittings.
24 W, Approximate Size - 297 mm(Each side)''

''BATHROOM LIGHT FITTING(EXCEPT LAMP) : Providing &

fixing of the bath-room light Fittings consisting of oxidized or
golden or chromium plated brass base with carrier, brass
holder , earth terminal, necessary wiring with 2 x 0.4 sq.mm
stranded PVC insulated flexible FR cable etc. The fittings
Four
shall be suitable for use of LED lamp and complete sample
Thousand
PART-G-iii : 02- to be accepted / approved by the Engineer-in-charge (with 2 Nine
Seven
STORIED years warranty). Hundred
Hundred
SECURITY Light source 9W LED Bulb and Forty-
616 17 Each 5.000 945.001 4725.005 and
BUILDING Material: SS Sheet, SS/Brass pipe (Dia-10mm), Aluminium Five point
Twenty-
(ELECTRICAL Sheet, Glass Zero Zero
Five point
WORKS) L-350mm B-120mm P-90mm One
Zero Zero
GLORIA cat. no. GBB-959-2105-FR
Five
Energy+ Cat no-EPML-10038
Cosmo Cat No-BDTCL-MLF-01
Asha Cat No. ACS-BB 2802 TTG
Crescent-CB-476/9-644/9
Watt: 9W LED Bulb or equivalent.''

617 PART-G-iii : 02- 18 ''TUBE & PANEL LIGHT FITTINGS (LED) Supply & fixing Each 40.000 1620.001 One 64800.040 Sixty-Four
STORIED LED tube & panel light fittings of following specifications: Thousand Thousand
SECURITY Luminous efficacy: 100 lm/W(minimum) Six Eight
BUILDING Power Factor: minimum 0.95 Hundred Hundred
(ELECTRICAL Colour Rendering Index(Ra) : and point Zero
WORKS) i) For Residential building Ra≥80 Twenty Four
ii) For office and other types of buildings 70≤Ra< 85 point Zero
Driver : MEANWELL/OSRAM / ENERGY+/ Zero One
SIGNIFY(PHILIPS) or equivalent IEC standard,
LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE
/ BRIDGELUX or equivalent.
Colour temperature : 3500K-6500K (Warm-White)
Model & sample to be accepted / approved by the Engineer-
in-charge (with 2 years warranty).
Material: Aluminium Alloy ABS Plastic
GLORIA cat No- GTF (LED). 774
Energy+EPTL-1023
Cosmo Cat no-BDTCL-LE-xTS-01
Adex -AD BL 840

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 68/80
3/11/24, 2:55 PM View Form
Asha Cat no-ACS ?LTLS-1635
Megaman-MXL2027
or equivalent.
4'x36W''

''GATE LIGHT FITTINGS (LED)

Supply & fixing LED garden & gate light fittings of following
specifications:
Luminous efficacy: 80 lm/w(minimum),
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :
i) For Residential building Ra≥80
ii) For office and other types of buildings 70≤Ra< 85
Driver: Should be of IEC standard such as
MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or
Three
equivalent Forty-Six
Thousand
PART-G-iii : 02- LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE Thousand
One
STORIED / BRIDGELUX or equivalent. Eight
Hundred
SECURITY Colour temperature : 3500K-6500K (Warm-White) Hundred
618 19 Each 15.000 3123.001 and 46845.015
BUILDING Model & sample to be accepted / approved by the Engineer- and Forty-
Twenty-
(ELECTRICAL in-charge (with 2 years warranty). Five point
Three
WORKS) Watt: 15W LED bulb, Voltage: AC165-265V Zero One
point Zero
With Dia: 210 mm & Height :475 mm Five
Zero One
Material: Aluminium alloy, MS sheet painted with epoxy
powder paint & acrylic
Cast Aluminium thickness : minimum 5 mm
Gloria cat no- GGL-307
Energy+EPGL-16041
Asha-ACS-GL-9307
Crescent-CGL -74
LED: 15W
or similar product of SUNKO, ANNYESHA, FLOS or
equivalent''

''GARDEN LIGHT (LED) : Watt: 18W , Voltage: AC85-265V,

Material: Aluminium alloy + polycarbonate + MS Pipe Sixteen
Height:750mm ,Dia:170 mm Five Thousand
PART-G-iii : 02- MS Pipe Dia: 2'''' & Thickness: 2 mm Thousand Three
STORIED Cast Aluminium thickness : minimum 5 mm Four Hundred
SECURITY Gloria Cat. No: GGDL.367 Hundred and
619 20 Each 3.000 5441.001 16323.003
BUILDING ENERGY+ model no - EPGL 23052 and Forty- Twenty-
(ELECTRICAL Cosmo Cat. No: BDTCL- LBL-14 One point Three
WORKS) Asha Cat No. ACS-LGL 2076 Zero Zero point Zero
Crescent-CGL -27 One Zero
or similar product of SUNKO, ANNYESHA, FLOS or Three
equivalent''

''FLOOD LIGHT FITTINGS (LED):Supply & fixing LED flood

light fittings of following specifications:
Luminous efficacy: 100lm/w(minimum),
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :70≤Ra< 85
Driver: Should be of IEC standard such as
MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or
Five
equivalent Twenty-
Thousand
PART-G-iii : 02- LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE Three
Nine
STORIED / BRIDGELUX or equivalent. Thousand
Hundred
SECURITY Colour temperature : 3500K-6500K (Warm-White) Nine
620 21 Each 4.000 5976.001 and 23904.004
BUILDING Material: Aluminium Alloy Aluminium reflector, Heat proof Hundred
Seventy-
(ELECTRICAL glass/Polycarbonate and Four
Six point
WORKS) Model & sample to be accepted / approved by the Engineer- point Zero
Zero Zero
in-charge (with 2 years warranty). 100 W Zero Four
One
Gloria Cat no-GLFL-902
Energy+ cat no-EPFDL-17001 (100 W)
Cosmo cat no-BDTCL-LFDL-02
Adex-AD FLE 100W830
Asha cat No-ACS-LFL-2155- (100 W) or equivalent.

''

''BRACKET LED LIGHT FITTINGS: Supply & fixing of wall

bracket LED light fittings of following specifications:
Luminous efficacy: 80 lm/w(minimum),
Power Factor: minimum 0.95
Colour Rendering Index(Ra) :
i) For Residential building Ra≥80
ii) For office and other types of buildings 70≤Ra< 85
Driver: Should be of IEC standard such as Three
Nineteen
PART-G-iii : 02- MEANWELL/OSRAM/ENERGY+/SIGNIFY(PHILIPS) or Thousand
Thousand
STORIED equivalent Nine
Seven
SECURITY LED chips :EPISTAR / OSRAM / SIGNIFY(PHILIPS) / CREE Hundred
621 22 Each 5.000 3946.001 19730.005 Hundred
BUILDING / BRIDGELUX or equivalent. and Forty-
and Thirty
(ELECTRICAL Colour temperature : 3500K-6500K (Warm-White) Six point
point Zero
WORKS) Model & sample to be accepted / approved by the Engineer- Zero Zero
Zero Five
in-charge (with 2 years warranty). Material: Aluminium Alloy One
(thick-3mm) + Crystal Acrylic (Dia-95mm H-90mm)
Gloria Cat No GMWB 2997
Energy+ EPSL-49009,
Cosmo Cat No. BDTCL-WSL-18
Asha Cat No. ACS-LBS 1275 MS or equivalent motion
sensor light fittings.
15 W''

622 PART-G-iii : 02- 23.1 ''SINGLE PHASE DISTRIBUTION BOARD (SPDB): Each 1.000 12829.001 Twelve 12829.001 Twelve
STORIED Providing and fixing single phase distribution board (SPDB) Thousand Thousand
SECURITY [concealed / surface] having the following components and Eight Eight
BUILDING specifications: [Fig : 4.2]. 1. Steel board : Approximate size: Hundred Hundred
(ELECTRICAL 20''''x15''''x4'''' and and
WORKS) MS sheet : 18SWG with hinged type door and locking Twenty- Twenty-
arrangement duly painted with powder coating with epoxy Nine point Nine point
polyester resin on all surfaces of board (gray / off-white) etc. Zero Zero Zero Zero
In front side there will be tempered thick fiber glass of One One
minimum 8 mm thickness with rubber gaskets to observe the
inside arrangement. 2. Copper bar: Approximate size: 10''''x
1''''x 3mm(2 nos) and 6''''x 1''''x 3mm, (1 no) mounted on
insulator at both ends, capacity: 60-100A . 3. 1 No.
DPMCB(main control) and following nos.SPMCB, DPMCB

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 69/80
3/11/24, 2:55 PM View Form
and SPMCB Manufactured / Assembled and tested in
accordance with relevant BDS IEC 60898-1:2016 and IEC /
VDE / NEMA / BS / JIS standard.
Minimum breaking capacity 6/10 KA with thermal overcurrent
and instantaneous electromagnetic short circuit release. 4.
Loop Cable [from phase bar to SPMCB(circuit & power)]
Size: 1C-1x2.5 sq mm (BYM) with DPMCB and SPMCBs
accepted / approved by the Engineer-in-charge.
23.1) 6-way SPDB
Incoming : 1x40A DPMCB (6 KA)
Outgoing : 6x5-10A SPMCB (6 KA)''

Fourteen Fourteen
Thousand Thousand
PART-G-iii : 02-
One One
STORIED
''8-way SPDB Hundred Hundred
SECURITY
623 23.2 Incoming : 1x50A DPMCB (10 KA) Each 1.000 14179.001 and 14179.001 and
BUILDING
Outgoing : 8x5-10A SPMCB (10 KA)'' Seventy- Seventy-
(ELECTRICAL
Nine point Nine point
WORKS)
Zero Zero Zero Zero
One One

Sixteen Sixteen
Thousand Thousand
PART-G-iii : 02-
Five Five
STORIED
''10-way SPDB Hundred Hundred
SECURITY
624 23.3 Incoming : 1x60A/63A DPMCB (10 KA) Each 1.000 16571.001 and 16571.001 and
BUILDING
Outgoing : 10x5-10A SPMCB (10 KA)'' Seventy- Seventy-
(ELECTRICAL
One point One point
WORKS)
Zero Zero Zero Zero
One One

''THREE PHASE DISTRIBUTION BOARD (TPDB): Providing

and fixing three phase distribution board (TPDB) [concealed /
surface] having the following components and specifications:
[Fig : 4.3] .1. Steel board : Approximate size 36''''x30''''x6''''
MS sheet: 18 SWG with hinged type door and locking
arrangement duly painted with powder coating with epoxy
polyester resin on all surfaces of board (gray / off-white) etc.
In front side there will be tempered thick fiber glass of
Sixty-Four Sixty-Four
minimum 8 mm thickness with rubber gaskets to observe the
Thousand Thousand
PART-G-iii : 02- inside arrangement. 2. Copper bar : size 12''''x1''''x6 mm(4
Two Two
STORIED No's) and 6''''x1''''x5mm(1 No) mounted on insulator at both
Hundred Hundred
SECURITY ends. Capacity : 200-300A. 3. 1 no. TPMCCB (main control)
625 24 Each 1.000 64284.001 and 64284.001 and
BUILDING and following nos. TPMCCB for feeders. TPMCCB's are
Eighty- Eighty-
(ELECTRICAL Manufactured / Assembled and tested in accordance with
Four point Four point
WORKS) IEC / VDE / NEMA / BS / JIS along with relevant BDS IEC
Zero Zero Zero Zero
standard. Minimum breaking capacity 10-16 KA with thermal
One One
overcurrent and instantaneous electromagnetic short circuit
release. 4. Loop Cable: From phase bar to TPMCCB (circuit
& power)
Cable Size: As required compatible with circuit breaker with
TPMCCBs accepted / approved by the Engineer-in-charge.
100A TPDB
Incoming : 1x100A TPMCCB (10 KA)
Outgoing: 6x10-20A TPMCCB (10 KA)''

''CIRCUIT BREAKER (SPMCB): Providing & fixing on a

PART-G-iii : 02- Seven
prepared board 250 volt grade following single pole miniature Seven
STORIED Thousand
circuit breaker (SPMCBS) having minimum breaking capacity Hundred
SECURITY Eight
626 25.a 6-KA with thermal over-current and instantaneous Each 10.000 780.001 and Eighty 7800.010
BUILDING Hundred
electromagnetic short circuit release provision. as per point Zero
(ELECTRICAL point Zero
SPMCBS accepted / approved by the engineer. Zero One
WORKS) One
a) 10 Amps.''

PART-G-iii : 02- Three

Seven
STORIED Thousand
Hundred
SECURITY Nine
627 25.b 16 Amps. Each 5.000 780.001 and Eighty 3900.005
BUILDING Hundred
point Zero
(ELECTRICAL point Zero
Zero One
WORKS) Zero Five

PART-G-iii : 02- Seven

Seven
STORIED Thousand
Hundred
SECURITY Eight
628 25.c 20 Amps. Each 10.000 780.001 and Eighty 7800.010
BUILDING Hundred
point Zero
(ELECTRICAL point Zero
Zero One
WORKS) One

PART-G-iii : 02- Eleven

Seven
STORIED Thousand
Hundred
SECURITY Seven
629 25.d 25 Amps. Each 15.000 780.001 and Eighty 11700.015
BUILDING Hundred
point Zero
(ELECTRICAL point Zero
Zero One
WORKS) One Five

''TPMCB : Providing & fixing on a prepared board 500 volt

PART-G-iii : 02- Four Forty
grade following Triple pole miniature circuit Breaker (TPMCB)
STORIED Thousand Thousand
having minimum breaking capacity 6-KA /10 KA with thermal
SECURITY AND Three
630 26 over-current and instantaneous electromagnetic short circuit Each 10.000 4030.001 40300.010
BUILDING Thirty Hundred
release provision.
(ELECTRICAL point Zero point Zero
TPMCB accepted / approved by the engineer.
WORKS) Zero One One
a) 10 Amps.''

''TPMCCB: Providing & fixing on a prepared board 500 volt Seven Forty-Four
PART-G-iii : 02- grade following triple-pole molded case circuit breaker Thousand Thousand
STORIED (TPMCCB) with thermal over-current and instantaneous Four Seven
SECURITY electromagnetic short circuit release provision, manufactured Hundred Hundred
631 27.a Each 6.000 7466.001 44796.006
BUILDING and tested in accordance with relevant IEC / VDE / NEMA / and Sixty- and
(ELECTRICAL BS / JIS standards. Six point Ninety-Six
WORKS) TPMCCB accepted / approved by the engineer. Zero Zero point Zero
a) 15 Amps. (minimum 10-KA)'' One Zero Six

632 PART-G-iii : 02- 27.b 40 Amps. (minimum 10-KA) Each 1.000 7466.001 Seven 7466.001 Seven
STORIED Thousand Thousand
SECURITY Four Four
BUILDING Hundred Hundred
and Sixty- and Sixty-

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 70/80
3/11/24, 2:55 PM View Form
(ELECTRICAL Six point Six point
WORKS) Zero Zero Zero Zero
One One

Seven Seven
PART-G-iii : 02- Thousand Thousand
STORIED Four Four
SECURITY Hundred Hundred
633 27.c 50 Amps. (minimum 10-KA) Each 1.000 7466.001 7466.001
BUILDING and Sixty- and Sixty-
(ELECTRICAL Six point Six point
WORKS) Zero Zero Zero Zero
One One

Seven Seven
PART-G-iii : 02- Thousand Thousand
STORIED Four Four
SECURITY Hundred Hundred
634 27.d 60 Amps. (minimum 10-KA) Each 1.000 7466.001 7466.001
BUILDING and Sixty- and Sixty-
(ELECTRICAL Six point Six point
WORKS) Zero Zero Zero Zero
One One

''CAPACITY CONTROL CIRCUIT BREAKER FEEDER UNIT:

Supplying of 415V, 3 phase, 50Hz following capacity control
Forty- Forty-
circuit breaker feeder unit as per following specification with
PART-G-iii : 02- Seven Seven
thermal overcurrent & instantaneous electromagnetic short-
STORIED Thousand Thousand
circuit release manufactured and tested as per NEMA / IEC /
SECURITY Three Three
635 28 VDE / BS / JIS standards (adjustable type above 100A Each 1.000 47303.001 47303.001
BUILDING Hundred Hundred
rating) for sub-station L.T panel. Rated operating voltage :
(ELECTRICAL and Three and Three
220-690 V.Rated insulation voltage : 690 volt.Rated impulse
WORKS) point Zero point Zero
withstand voltage : 6KV.Utilization category : A or B,
Zero One Zero One
accepted / approved by the engineer.
a) 400A (36KA) TPMCCB''

Two
''BUS - BAR: Providing and fixing 500 V 3-phase bus-bar Five
PART-G-iii : 02- Thousand
system assembled in prelaid board with porcelain insulators. Thousand
STORIED Five
There will be equal size holes on every bar at 0.5'''' interval AND
SECURITY Hundred
636 29.a and bar to bar gap shall be 2'''' - 3''''. Each 2.000 2544.001 5088.002 Eighty-
BUILDING and Forty-
a) 60 - 100 Amps. Copper flat bar (5 nos) : 4 nos 9'''' Eight point
(ELECTRICAL Four point
x1''''x3mm and 1 no 4''''x1''''x4mm for earthing mounted on Zero Zero
WORKS) Zero Zero
insulator at both ends individually.'' Two
One

Six Six
Thousand Thousand
PART-G-iii : 02-
Two Two
STORIED
200 - 300 Amps. Copper flat bar (5 nos) : 4 nos 15''x1''x8mm Hundred Hundred
SECURITY
637 29.b and 1 no 4''x1''x8mm for earthing mounted on insulator at Each 1.000 6225.001 and 6225.001 and
BUILDING
both ends individually. Twenty- Twenty-
(ELECTRICAL
Five point Five point
WORKS)
Zero Zero Zero Zero
One One

''BOARD: Supplying and fixing of almirah type 18 SWG metal

board of depth 228mm (6?) duly painted with powder coating
with epoxy polyester resin on all surfaces of board (gray / off-
Seventy-
white) having built in push type / suitable locking
Eighteen Five
PART-G-iii : 02- arrangement including metal bridges of suitable size for fixing
Thousand Thousand
STORIED of all electrical control devices complete with suitable
Seven One
SECURITY anchoring arrangement in wall / column and keeping
638 30 Sqm 4.000 18780.001 Hundred 75120.004 Hundred
BUILDING provision for cable inlets and exits as required (only front
and Eighty and
(ELECTRICAL surface of the board will be considered for measurement).
point Zero Twenty
WORKS) (Manufactured by RECO / NASCO / C&S or equivalent
Zero One point Zero
product of any other manufacturer) The front side of the
Zero Four
boards should be covered with required size tempered thick
fiber glass with rubber gaskets to observe the inside
arrangement. ''

''EARTHING: Earthing the electrical installation with 40 mm

(1.5'''') dia G.I. pipe (earth electrode) having 6.35 mm. dia
Three
hole across the pipe at 305 mm. interval securely bonded by Fifty-One
Lakh Nine
PART-G-iii : 02- soldering with 2 nos. of No-2 SWG HDBC earth leads (at the Thousand
Thousand
STORIED top of the electrode) with its protection by 20 mm. (3/4'''') dia Five
Two
SECURITY G.I. pipe up-to plinth level run at a depth of 609.6 mm (2 ft.) Hundred
639 31 Set 6.000 51536.001 309216.006 Hundred
BUILDING below G.L up-to main board to be earthed including and Thirty-
and
(ELECTRICAL necessary connecting copper sockets, bolts, nuts, etc. Six point
Sixteen
WORKS) complete for maintaining earth resistance within 1 ohm. [Fig : Zero Zero
point Zero
4.19] One
Zero Six
Depth of bottom of main electrode at 37338 mm. (122.5 ft)
from GL & length of electrode 36576 mm. (120 ft).''

Construction of earthing inspection pit inside measurement Forty-Four

Seven
600 mm x 600 mm with 250 mm thick brick in cement mortar Thousand
PART-G-iii : 02- Thousand
(1:4) with 100mm thick RCC top slab (1:2:4) with 1% re- One
STORIED Three
enforcement 450 mm dia water sealed CI man-hole cover Hundred
SECURITY Hundred
640 32 with locking arrangement including necessary earth works, Set 6.000 7362.001 44172.006 and
BUILDING and Sixty-
site filling and one brick flat soling 75 mm thick (1:3:6) base Seventy-
(ELECTRICAL Two point
concrete for making inlet channel & 12mm thick (1:2) cement Two point
WORKS) Zero Zero
plaster with neat finishing etc. all complete up to a depth of Zero Zero
One
.75 meter. Six

One
Fifty-Six
PART-G-iii : 02- Thousand
Thousand
STORIED One
Providing & drawing no-2 HDBC wire through 12.7 mm. (½'') Six
SECURITY Hundred
641 33 dia G.I. pipe including fitting, fixing the G.I. pipe in wall or Rm 50.000 1133.001 56650.050 Hundred
BUILDING and Thirty-
column complete as required. and Fifty
(ELECTRICAL Three
point Zero
WORKS) point Zero
Five
Zero One

642 PART-G-iii : 02- 34 ''TELECOMMUNICATION CABLE: Supplying and drawing of Rm 200.000 34.001 Thirty- 6800.200 Six
STORIED following sizes PVC insulated & sheathed twisted pair Four point Thousand
SECURITY telecommunication cables having dia of Each core is 0.6 mm Zero Zero Eight
BUILDING through prelaid pipes. One Hundred
(ELECTRICAL Cable manufacturer(s) must have valid test certificate from point Two
WORKS) internationally accrediated laboratory (like CPRI, KEMA etc)

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 71/80
3/11/24, 2:55 PM View Form
approved / accepted by the Engineer.
a) 1C-4x0.282 sqmm (2 pair)''

''CO-AXIAL CABLE : Supplying & drawing of following sizes

PART-G-iii : 02- One Eighty-
PVC insulated & sheathed 75 ohm impedance co-axial
STORIED Hundred Nine
cables through prelaid pipes.
SECURITY and Thousand
643 35.a Cable manufacturer(s) must have valid test certificate from Rm 800.000 112.001 89600.800
BUILDING Twelve Six
internationally accrediated laboratory (like CPRI, KEMA etc)
(ELECTRICAL point Zero Hundred
approved/accepted by the Engineer.
WORKS) Zero One point Eight
a) RG-11''

PART-G-iii : 02- Six

STORIED ''CABLE / SOCKET / FERULES : Supply and fixing of copper Sixty- Hundred
SECURITY made sockets / ferules for following size cables (need to be Seven and
644 35.b Rm 10.000 67.001 670.010
BUILDING shown voltage rating.) point Zero Seventy
(ELECTRICAL 16 sqmm'' Zero One point Zero
WORKS) One

Three
PART-G-iii : 02-
Hundred
STORIED Seventy-
and
SECURITY Nine point
645 35.c 25 sqmm Rm 5.000 79.001 395.005 Ninety-
BUILDING Zero Zero
Five point
(ELECTRICAL One
Zero Zero
WORKS)
Five

SINGLE LINE TELEPHONE SET: EXCLUSIVE USE: Supply Five

Two
installation testing & commissioning of single line telephone Thousand
PART-G-iii : 02- Thousand
set for executive use with provision volume up+ down, redial, Three
STORIED Six
flash etc. including display with CID system complete. Hundred
SECURITY Hundred
646 36 Suitable for use in tropical country like Bangladesh complete Each 2.000 2663.001 5326.002 and
BUILDING and Sixty-
with required accessories and in conformity to specified Twenty-
(ELECTRICAL Three
codes & specification of international standards & CE / UL / Six point
WORKS) point Zero
CSA certified. Model & sample to be approved by the Zero Zero
Zero One
Engineer. Two

''GALVANIZED CABLE TRAY: Supply, fitting and fixing Thirty-

Two
galvanized cable tray made of 18 SWG (1.2 mm) MS Sheet Four
PART-G-iii : 02- Thousand
evenly perforated with 7 mm width Capsule hole punch with Thousand
STORIED Three
self-Hanging Facility at top, joint clamp, including fabricating Nine
SECURITY Hundred
647 37 cost of electricity, tools and plants, workshop charges, Rm 15.000 2331.001 34965.015 Hundred
BUILDING and Thirty-
carriage of the same, cutting groves in the RCC or brick and Sixty-
(ELECTRICAL One point
work, mending good the damages with CC (1:2:4), etc. Five point
WORKS) Zero Zero
complete for all floors accepted by the engineer. Zero One
One
300x100 mm without cover'' Five

GALVANIZED CABLE LADDERS: Supply, fitting and fixing of

Seventy-
Galvanized cable ladders made of 14 SWG (2 mm) MS
Four Three
PART-G-iii : 02- Sheet with rungs spaced of 300 mm centers, 100x25mm side
Thousand Thousand
STORIED rail with multiple formation to protect from torsion and
Nine Six
SECURITY bending with full loading capacity with self-Hanging Facility at
648 38 Rm 15.000 4908.001 Hundred 73620.015 Hundred
BUILDING top and bottom, joint clamp, including fabricating cost of
and Eight and
(ELECTRICAL electricity, tools and plants, workshop charges, carriage of
point Zero Twenty
WORKS) the same, cutting groves in the RCC or brick work, mending
Zero One point Zero
good the damages with CC (1:2:4), etc. complete for all
One Five
floors accepted by the engineer. 400x100 mm

''PVC PIPE : Providing & laying of following PVC pipe (best

PART-G-iii : 02- quality PVC pipe of reputed manufacturer) embedded in wall
STORIED / column / ceiling / floor etc. with all accessories, 18 SWG GP
Fifty point Five
SECURITY sheet pull box with 3 mm thick ebonite sheet cover, fixing
649 39.a Rm 100.000 50.001 Zero Zero 5000.100 Thousand
BUILDING materials etc. as required including mending the damages
One point One
(ELECTRICAL good.
WORKS) a) Minimum inner dia 20 mm & minimum wall thickness 1.5
mm. ''

PART-G-iii : 02-
Six
STORIED Sixty-
Thousand
SECURITY b) Minimum inner dia 25 mm & minimum wall thickness 1.5 Seven
650 39.b Rm 100.000 67.001 6700.100 Seven
BUILDING mm. point Zero
Hundred
(ELECTRICAL Zero One
point One
WORKS)

PART-G-iii : 02-
Nine
STORIED Ninety-
Thousand
SECURITY c) Minimum inner dia 30 mm & minimum wall thickness 1.5 Two point
651 39.c Rm 100.000 92.001 9200.100 Two
BUILDING mm. Zero Zero
Hundred
(ELECTRICAL One
point One
WORKS)

Sixteen Three
''LOOP CABLE: Supply and fixing of loop cable of this
PART-G-iii : 02- Thousand Lakh
following sizes : Cable manufacturer(s) must have valid type
STORIED Four Twenty-
test certificate (within last seven years) from internationally
SECURITY Hundred Nine
652 40.a accredited laboratory (like CPRI, KEMA etc.) accepted / Rm 20.000 16453.001 329060.020
BUILDING and Fifty- Thousand
approved by the Engineer In Charge.
(ELECTRICAL Three AND Sixty
a) From transformer to LT switchgear (without ECC & conduit
WORKS) point Zero point Zero
) ,1C - 4 x 240 sqmm (NYY)''
Zero One Two

Seven
One Lakh
Thousand
PART-G-iii : 02- Fifty-Five
Seven
STORIED Thousand
Hundred
SECURITY From LT switchgear to PFI plant (without neutral, ECC and Six
653 40.b Rm 20.000 7783.001 and 155660.020
BUILDING conduit), 1C - 3 x 150 sqmm (NYY) Hundred
Eighty-
(ELECTRICAL and Sixty
Three
WORKS) point Zero
point Zero
Two
Zero One

One
PART-G-iii : 02-
Hundred
STORIED ''INSULATING TAPE: Supply and fixing of PVC insulating Twenty-
and
SECURITY tape. (UK / JAPAN or equivalent brand accepted / approved Five point
654 41.a Rm 5.000 25.001 125.005 Twenty-
BUILDING by the Engineer In Charge) Zero Zero
Five point
(ELECTRICAL a) ¾ '''' width PVC insulation tape (Nitto) (10 yards per reel)'' One
Zero Zero
WORKS)
Five

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 72/80
3/11/24, 2:55 PM View Form
Two Five
PART-G-iii : 02-
Hundred Thousand
STORIED
and Six
SECURITY
655 41.b ¾'' width PIB tape (25m per reel) Rm 20.000 282.001 Eighty- 5640.020 Hundred
BUILDING
Two point and Forty
(ELECTRICAL
Zero Zero point Zero
WORKS)
One Two

''CENTRIFUGAL PUMP MOTOR SET:

SINGLE STAGE (SINGLE PHASE) (For lower capacity/
smaller household requirement)
Providing of single stage 2800-2900 RPM monoblock type
Centrifugal water pump motor set (reservoir to overhead Twenty-
tank) manufactured according to relevant BDS standard and Fourteen Eight
PART-G-iii : 02- ISO 9906:2012, GRADE 3B/ DIN/ NEMA/ IEC/ BS/ VDE/ Thousand Thousand
STORIED JIS/CEI 2-3/ CSA/ GS/ SONCAP/ ROHS & ISO 9001 Three Six
SECURITY (Quality) ISO 14001 (Environment and Safety) standard of Hundred Hundred
656 42 Each 2.000 14338.001 28676.002
BUILDING following capacity suitable for operation at single phase, 230 and Thirty- and
(ELECTRICAL V ± 5 %, 50 Hz AC having insulation: B & protection: IPX4 Eight point Seventy-
WORKS) (minimum) & CE certified. Zero Zero Six point
Country of Manufacture: Bangladesh/ China/ Vietnam/ One Zero Zero
Malaysia as per sample accepted / approved by the Two
Engineer-in-charge.
HP = 1.5, Discharge (liter / min) = 30 - 120, Head (meter) =
38 - 22,
Suction dia (mm) = 32, Delivery dia (mm) = 25.''

''WATER HEATER / GEYSER :

Providing & installation of following capacity electrically
operated water heater containing blue diamond inner tank
made of minimum 14 SWG, magnesium anode rod , non-
magnetic rust proof galvanized steel & outer jacket, body
Eight Eight
made of minimum 22 SWG mild steel sheet & 20 mm
Thousand Thousand
PART-G-iii : 02- polyurethane thermal insulation with automatic thermostatic
One One
STORIED switch with suitable wattage range of stainless steel Incoloy
Hundred Hundred
SECURITY 800 glassline immersion heating element , thermal cut-out ,
657 43 Each 1.000 8172.001 and 8172.001 and
BUILDING on-off indicating lamp, Earth Leakage Circuit Breaker
Seventy- Seventy-
(ELECTRICAL (ELCB), safety valve 0.8 Mpa, inlet and outlet water
Two point Two point
WORKS) connection pipe including fixing accessories all complete as
Zero Zero Zero Zero
required with adequate safety measures in conformity with
One One
codes and specification of international standards. Suitable
for use in tropicalized country like BANGLADESH. Model and
sample to be approved by competent authority.
Suitable for maximum six storied building
a) 30 liter / hr. (1000 ~ 1500 watt) wall mounting type.''

658 PART-G-iv : 02- 1 ''SPLIT TYPE AIR-COOLER: Supply, installation, testing & Each 4.000 201880.001 Two Lakh 807520.004 Eight Lakh
STORIED commissioning of split type air-cooler with inverter One Seven
SECURITY comprising condensing and evaporating units having Thousand Thousand
BUILDING (AIR following cooling capacity based on indoor temperature Eight Five
CONDITIONING 27º-30ºC DB / 19.5º-22ºC WB and outdoor temperature Hundred Hundred
SYSTEM WORKS) 35º-40ºC DB at high fan speed condition suitable for and Eighty and
installation & operation in tropicalized country like point Zero Twenty
Bangladesh & as per detailed specifications & standard as Zero One point Zero
mentioned below: Zero Four
(a). OUTDOOR UNIT / CONDENSING UNIT
(i). Type : Compact weather proof outdoor type condensing
unit
(ii). Compressor : Hermitically sealed reciprocating / rotary
compressor.
(iii). Refrigerant : Internationally accepted & recommended
and
most commonly used gas (CFC free)
(iv). Blower motor : Well balanced type direct driven
centrifugal
type blower fan
(v). Power supply :
(i). 200-250 V, single phase, 50 Hz. AC supply [up to 30000
BTU/HR]
(ii). 400-440 V 3-phase, 50 Hz. AC supply [above 30000
BTU/HR ]
(vi). Condensing pipe / coil : Made of copper
(vii). EER : Minimum 8.5 [ EER = BTU/HR ]
WATT
(viii). Others features :
(i). Well balanced in all respect having interlock with the fan
coil unit.
(ii). Compressor dully equipped with vibration isolator,
thermostatic & overload controls, magnetic contactors and all
other standard accessories complete.''
''(iii). Refrigerant copper pipe [From outdoor to indoor unit]
with thermal insulation, refrigerant charging arrangement etc.
[ Minm length10 mtr.]
(iv). Reqd. size PVC insulated & sheathed cable with ECC
through water grade PVC pipe from outdoor to indoor unit.
(b). INDOOR UNIT / FAN COIL UNIT
Features : (i). Direct expansion system fan coil unit with well
balanced direct driven centrifugal type fan.
(ii). Fancy & adjustable air circulating louver grill, removable
& washable type filter .''
''(iii). Condensing water drain out PVC flexible pipe with
necessary insulation
(iv). Thermostatic switch and remote control switch.
(c). Standard : Major component shall be manufactured as
per
relevant international standard & code.
(d). Documents : 01. Manufacturing company shall have the
following certificate :
(i). ISO-9001, 2008
(ii). CE / UL certification
Warranty :
The bidder should provide the guaranty of compressor for at
least 2 years & free service with spares for 2 years from the
date of commissioning & it should be obtained from the air
cooler selling agency. Any brand manufactured or assembled
in JAPAN / MALAYSIA / SOUTH KOREA / TAIWAN /

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 73/80
3/11/24, 2:55 PM View Form
THAILAND / USA / EU countries accepted / approved by the
Engineer in accordance with fulfillment of the above
specifications and having relevant certificates as mentioned.
Capacity : 28000-30000 BTU/HR a)Wall mounted (Inverter
Type) ''

''LOUVER, DIFFUSER & GRILLE :

Supply, installation, testing & commissioning of Louver,
Three
Diffuser, Damper & Grille with complete all necessary One
Thousand
PART-G-iv : 02- accessories and fittings, Fixing for commissioning of the Thousand
Nine
STORIED equipment as follows technical specification, drawing and Nine
Hundred
SECURITY time to time site instruction by the Engineer-in-charge.All Hundred
659 2.1 Each 2.000 1963.001 3926.002 and
BUILDING (AIR Louver/Grill shall be constructed with extruded aluminum and Sixty-
Twenty-
CONDITIONING with powder coat paint finish complete with face margin and Three
Six point
SYSTEM WORKS) fixing accessories. Neck velocity shall not be more than 500 point Zero
Zero Zero
ft/min at a pressure drop of 0.08 inch WC. Country of Zero One
Two
Manufacture : Malaysia/China Exhaust Air Louver:
a) 250 x 200 mm ''

Two
Thirteen
PART-G-iv : 02- Thousand
Thousand
STORIED Two
Six
SECURITY ''Air Diffuser With Damper : Hundred
660 2.2 Each 6.000 2268.001 13608.006 Hundred
BUILDING (AIR a) 150x150 mm'' and Sixty-
and Eight
CONDITIONING Eight point
point Zero
SYSTEM WORKS) Zero Zero
Zero Six
One

''VENTILATION FAN :
Supply, installation, testing & commissioning of Fan including
non return damper with all necessary accessories and Eleven Eleven
PART-G-iv : 02-
fittings, Fixing for commissioning of the equipment including Thousand Thousand
STORIED
all electrical & Civil works as follows technical specification, AND AND
SECURITY
661 3.1 drawing and time to time site instruction from Engineer-in- Each 1.000 11043.001 Forty- 11043.001 Forty-
BUILDING (AIR
charge. Country of Origin: USA/UK/ EU/Japan .Country of Three Three
CONDITIONING
Manufacture : Malaysia. point Zero point Zero
SYSTEM WORKS)
Exhaust Ventilation Fan (Wall Type): Fan shall be Zero One Zero One
propeller/axial type
a) Capacity : 200 cfm, ESP 100 Pa''

Twelve Twenty-
PART-G-iv : 02- Thousand Four
STORIED Two Thousand
SECURITY Exhaust Ventilation Fan (Duct Type): Fan shall be centrifugal Hundred Five
662 3.2 Each 2.000 12270.001 24540.002
BUILDING (AIR duct type Capacity : 200 cfm, ESP 100 Pa and Hundred
CONDITIONING Seventy and Forty
SYSTEM WORKS) point Zero point Zero
Zero One Zero Two

''DUCT WITH ACCESSORIES :

METAL DUCTING :
Supply, installation and testing of metal ducts of different Two
PART-G-iv : 02-
sizes as per drawing and detail technical specification Hundred Forty-Four
STORIED
including supply of duct hanger/ isolator boxes, hanger rods, and Thousand
SECURITY
663 4 steel supports, all other materials and consumables. Duct Sq.Ft 200.000 221.001 Twenty- 44200.200 Two
BUILDING (AIR
materials and construction shall be complete as per detail One point Hundred
CONDITIONING
specification and SMACNA standards. The work shall be Zero Zero point Two
SYSTEM WORKS)
complete as per instruction of Engineer-in-charge. and One
sample shall be approved by the Engineer-in-Charge.
a) Ducts made of 22 SWG GP Sheets''

''Fire Extinguisher:
Dry chemical powder type : Supply & fixing the following
capacities multi purpose ABC dry chemical powder stored
pressure type with manometer system fire extinguisher
suitable for repeated use complete with wall bracket, CO2 Two Seventeen
cartridge, easy refilling system etc. as per sample accepted Thousand Thousand
PART-G-v : 02-
& approved by the Engineer. Four Three
STORIED
Mono Amonium Phosphate based 40% ABC dry chemical Hundred Hundred
SECURITY
664 1 agent & has a moisture-proof, anti-caking properties. Each 7.000 2473.001 and 17311.007 and
BUILDING (FIRE
Working pressure : 12 BAR minimum & Test pressure : 25 Seventy- Eleven
FIGHTING
BAR minimum. Proper fire rating (as per NFPA 10) according Three point Zero
WORKS)
to the capacity of the extinguisher. Manufacturerer certificate point Zero Zero
shall have to be submitted if needed. Also sample of the dry Zero One Seven
chemical powder will be tested by the proper authority in
Bangladesh if needed.
Country of origin : CHINA / MALAYSIA
a) 5 Kg. capacity.''

''CARBON-DI-OXIDE TYPE :
Supply & fixing of the following capacities Carbon-di-Oxide
stored pressure type with manometer system fire
Four Twenty-
extinguisher suitable for repeated use complete with wall
PART-G-v : 02- Thousand Four
bracket, CO2 cartridge, easy refilling system etc. as per
STORIED Nine Thousand
sample accepted & approved by the Engineer in Charge.
SECURITY Hundred Seven
665 2 Working pressure : 12 BAR minimum & Test pressure : 25 Each 5.000 4946.001 24730.005
BUILDING (FIRE and Forty- Hundred
BAR minimum. Proper fire rating (as per NFPA 10 / BS / EN)
FIGHTING Six point and Thirty
according to the capacity of the extinguisher. Manufacturer's
WORKS) Zero Zero point Zero
certificate shall have to be submitted if needed. Also sample
One Zero Five
of the Carbon-di-Oxide will be tested by the proper authority
in Bangladesh if needed.
a) 5 Kg. capacity.''

Three
One
Thousand
PART-G-v : 02- Thousand
Six
STORIED ''FIRE BALL : Eight
Hundred
SECURITY Supply of 1.25 Kg Fireball with bracket filled with Non-Toxic Hundred
666 3 Each 2.000 1841.001 3682.002 and
BUILDING (FIRE Mono Ammonium Phosphate of minimum 40 grade (fire class and Forty-
Eighty-
FIGHTING C).'' One point
Two point
WORKS) Zero Zero
Zero Zero
One
Two

667 PART-G-v : 02- 4 ''FIRE BLANKET : Each 10.000 1411.001 One 14110.010 Fourteen
STORIED Supply and fixing of fire proof emergency Fire Blanket made Thousand Thousand
SECURITY of fire glass cloth . Dimension of the blanket should be Four One
BUILDING (FIRE minimum 6' × 6' . Working temperature is minimum 550 0 C.'' Hundred Hundred
and and Ten

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 74/80
3/11/24, 2:55 PM View Form
FIGHTING Eleven point Zero
WORKS) point Zero One
Zero One

''Fire hydrant unit (1½'''' dia) : Each 1½'''' dia fire hydrant unit
Fourteen Twenty-
shall be complete with the following components and
Thousand Eight
PART-G-v : 02- accessories.
Four Thousand
STORIED a) Hose angle valve : 1½'''' dia : Supply and installation of
Hundred Nine
SECURITY hose angle valve / landing valve of 1½'''' (40mm) shall be
668 5 Each 2.000 14479.001 and 28958.002 Hundred
BUILDING (FIRE made with brass / bronze with instantaneous female outlet.
Seventy- and Fifty-
FIGHTING The valve shall be UL Listed / FM approved and working
Nine point Eight point
WORKS) pressure shall not be less than 10kg/cm². Inlet shtall be
Zero Zero Zero Zero
threaded end type, shall be installed inside the hydrant
One Two
cabinet.''

Fire hose : 1½'' dia : Supply & installation of fire hose of

40mm dia 30 meter long with hose rack frame & nipple
suitable to install inside the hydrant cabinet. The hose shall
conforming to UL 19. The hose shall be UL Listed / FM
Sixteen Thirty-
approved & burst pressure shall be not less that 600 psi and
PART-G-v : 02- Thousand Three
working pressure 200 psi, shall be made with special quality
STORIED Five Thousand
EPDM rubber as internal lining, suitable to withstand heat
SECURITY Hundred One
669 6 and polluted water, heat and abrasion resistance, Jacketting Each 2.000 16565.001 33130.002
BUILDING (FIRE and Sixty- Hundred
shall be made up of 100% polyester for extra sthrength.
FIGHTING Five point and Thirty
Hose shall be 30meter long in a single length and shall be
WORKS) Zero Zero point Zero
with male coupling in one end other end with female
One Zero Two
coupling. Couplings shall be binded with hose with copper
wire properly. Coupling shall be available in NST or
instantaneous couplings shall be made with bronze /
alluminium alloy, polished / hard anodized to confirm BS 336.

''STEEL CABINET : Fabrication, supply & installation of Fourteen

Twenty-
hydrant cabinet of suitble size (as per site measurement and Thousand
PART-G-v : 02- Nine
requirement / recommended by the Engineering to Seven
STORIED Thousand
accommodate landing valve, hose, nozzle and coupling. The Hundred
SECURITY Four
670 7 cabinet shall be with swing type door with or without Each 2.000 14725.001 and 29450.002
BUILDING (FIRE Hundred
breakable tempered glass. The cabinet shall be made with Twenty-
FIGHTING and Fifty
18 SWG sheet steel, powder coated of red color. Country of Five point
WORKS) point Zero
origin : Locally fabricated. Zero Zero
Zero Two
a) Class - II cabinet ( for 1.5'' hose rack assembly) '' One

''Black steel pipe ERW, 40 schedule: Supply and installation

One
of black steel pipe ASTM A53 ERW, 40 schedule. The pipe
PART-G-v : 02- Thousand Fifty-Eight
work shall be included with welded type tee, elbow, reducer
STORIED One Thousand
etc. and also hangers / supports etc completed. Pipe work
SECURITY Hundred Three
671 8.a (over ground) shall be painted with red oxide primer. Rft 50.000 1166.001 58300.050
BUILDING (FIRE and Sixty- Hundred
Underground pipes should be layed after wrapping with PVC
FIGHTING Six point point Zero
tape after using approved priver. Pipe wall thickness shall be
WORKS) Zero Zero Five
as per mentioned for different diameters.
One
a) 65 mm (2½ inch) dia, wall thickness: 5.2mm''

Thirty
PART-G-v : 02-
Six Thousand
STORIED
Hundred Three
SECURITY
672 8.b 40 mm (1½ inch) dia, wall thickness: 3.7mm Rft 50.000 607.001 and Seven 30350.050 Hundred
BUILDING (FIRE
point Zero and Fifty
FIGHTING
Zero One point Zero
WORKS)
Five

''GAS SUPPRESSION SYSTEM :

GAS CYLINDER WITH CLEAN AGENT GAS : Supply &
fixing UL/FM approved seamless cylinder with FK-5-1-12/
HFC-227ea clean agent gas for gas suppression system,
complete with pressure gauge, valve assembly and
necessary accessories with a safety burst disc and a safety
cap etc in conformity with NFPA 2001.Cylinder shall be
seamless steel type manufactured from billets & tested. The
cylinder/valve assembly shall have suitable metallic
protection for the valve enabling transportation cylinders
safely.The cylinder shall be super-pressurized with dry
Nitrogen to 25 bar. The cylinder shall be capable of
withstanding any temperature between -30° C & 70°C. All
cylinders shall be distinctly & permanently marked with the
quantity of agent contained, the empty cylinder weight, the
pressurization pressure & the zones they are protecting. Three Three
Storage pressure: 25 bar; Test pressure: From 150bar to 300 Lakh Lakh
bar .Cylinder should include Syphon tube and Support base/ Eighty Eighty
PART-G-v : 02-
Strap, complete with Valve Assembly and pressure Thousand Thousand
STORIED
gauge.The valve assembly shall be mounted directly on the Three Three
SECURITY
673 9 cylinder & should NOT have any adapter provision between Each 1.000 380385.001 Hundred 380385.001 Hundred
BUILDING (FIRE
the cylinder & valve as per requirements. Each cylinder valve and and
FIGHTING
shall have a provision for fixing a supervisory pressure switch Eighty- Eighty-
WORKS)
& a safety burst disc to protect the cylinder from over Five point Five point
pressure. The cylinder valve shall have a disabling plug to Zero Zero Zero Zero
prevent accidental discharge of the valve during One One
transportation & installation. Each Valve is to be fitted with a
pressure gauge for monitoring loss of pressure. The master
cylinder valve is to be released electrically which is
performed by means of a solenoid valve arrangement. Pilot
cylinder actuation & pneumatic devices shall be used only for
Slave Cylinder.
The Clean agent gas is stored in seamless steel cylinders &
dry nitrogen is added to provide additional energy to give the
required rapid discharge. Purity (%)of Clean Agent : 99.99,
Applicable Fire Class: Class A, B & C fires.Pressure range
:25 bar; Clean agent gas should be UL Listed/ FM Approved .
a) 20 Liter capacity.
NB: Procuring entity shall mention only one type of clean
agent gas (either FK-5-1-12 or HFC-227ea) based on design
consideration.''

674 PART-G-v : 02- 10 ''RELEASE CONTROL PANEL : Each 1.000 92029.001 Ninety- 92029.001 Ninety-
STORIED Providing & fixing Release control panel for gas suppression Two Two
SECURITY system complete with battery and all other necessary Thousand Thousand
BUILDING (FIRE accessories. Each unit shall be UL Listed/ FM Approved. AND AND
FIGHTING a) 2 Zone'' Twenty- Twenty-
WORKS) Nine point Nine point

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 75/80
3/11/24, 2:55 PM View Form
Zero Zero Zero Zero
One One

One
Nine
PART-G-v : 02- Thousand
''RELEASE CONTROL PANEL : Thousand
STORIED Eight
Providing & fixing Release control panel for gas suppression Two
SECURITY Hundred
675 11.a system complete with battery and all other necessary Each 5.000 1841.001 9205.005 Hundred
BUILDING (FIRE and Forty-
accessories. Each unit shall be UL Listed/ FM Approved. and Five
FIGHTING One point
a) 2 Zone'' point Zero
WORKS) Zero Zero
Zero Five
One

Four
Two
PART-G-v : 02- Thousand
Thousand
STORIED Four
Two
SECURITY Hundred
676 11.b 19 mm dia (3/4 Inch)360o Each 2.000 2209.001 Hundred 4418.002
BUILDING (FIRE and
and Nine
FIGHTING Eighteen
point Zero
WORKS) point Zero
Zero One
Zero Two

''REPEATER PANEL / REMOTE ANNUNCIATOR : Supply &

installation of repeater panel / remote LCD annunciator with
the same ''''look and feel'''' as the FACP operator interface.
The remote LCD annunciator shall use the same primary
acknowledge, silence, and reset keys, status LEDs and LCD
display as the FACP.Annunciator shall have super-twist LCD
display with two lines of 20 characters each (Minimum).
Annunciator shall be provided with programmable control
switches and associated LEDs.Under normal conditions the
LCD shall display a ''''SYSTEM IS NORMAL'''' or equivalent One Lakh One Lakh
message or indicate normal status without trouble as per Twenty- Twenty-
PART-G-v : 02-
manufacturer design.It Should be capable of detecting an Two Two
STORIED
abnormal condition and in this case, the appropriate LED Thousand Thousand
SECURITY
677 12 (alarm, supervisory or trouble) shall flash. The unit audible Each 1.000 122705.001 Seven 122705.001 Seven
BUILDING (FIRE
signal shall pulse for alarm conditions and sound steady for Hundred Hundred
FIGHTING
trouble and supervisory conditions.The LCD shall display the and Five and Five
WORKS)
following information relative to the abnormal condition of a point Zero point Zero
point in the system: Zero One Zero One
Operator keys shall be the key switch enabled to prevent
unauthorized use. The key shall only be removable in the
disabled position. Acknowledge, silence and reset operation
shall be the same as the FACP.Voltage: 20 to 32 VDC,
system supplied.Operating ambient temperature range shall
be : 0° to 45°C(Minimum).Operating humidity range: 0% to
93% RH Non Condensing (Minimum).The panel shall be
fixed on wall with surface mount box. Approvals: UL listed /
FM approved .''

''ADDRESSABLE MANUAL PULL STATION (MPS) : Supply

& installation of addressable type manual call station of red
color. Station will mechanically latch upon operation and
remain so until manually reset by opening with a key
common with the control units Shall be with compact
construction, suitable to electronics module enclosure
Nine Nineteen
minimizes dust infiltration. Allows mounting in standard
PART-G-v : 02- Thousand Thousand
electrical boxes. Screw terminals for wiring
STORIED Eight Six
connections.Activation of the MPS will required a firm
SECURITY Hundred Hundred
678 13 downward pull to activate the alarm switch. The pull lever Each 2.000 9816.001 19632.002
BUILDING (FIRE and and Thirty-
latches into the alarm position and remains extended out of
FIGHTING Sixteen Two point
the housing to provide a visible indication.Operating ambient
WORKS) point Zero Zero Zero
temperature range shall be : 0° to 45°C(Minimum).Humidity
Zero One Two
range: 93% RH(minimum) at 100°F (38°C).Housing color
shall be red with white raised lettering. Housing and pull lever
shall be made with lexan polycarbonate or equal.The MPS
shall be semi-flash / surface mount type.Approvals: UL
listed/FM approved.
a) Addressable manual pull station : Double action''

''ADDRESSABLE NOTIFICATION DEVICES :

ADDRESSABLE NOTIFICATION DEVICE (HORN WITH
STROBE) : Supply & installation of addressable type audible
horn with strobe for notification purpose shall contain an
Twenty-
electronic module and a selectable address setting. The Seven
Three
device shall be suitable to program the high / low setting of Thousand
PART-G-v : 02- Thousand
the audible (horn) appliances. The horn shall be red color Nine
STORIED Nine
with / without ''''FIRE'''' lettering.Addressable horn shall be UL Hundred
SECURITY Hundred
679 14 listed / FM approved . The horn shall be suitable to produce Each 3.000 7976.001 and 23928.003
BUILDING (FIRE and
sound pressure level of 89 dBA @ 24VDC at low level as per Seventy-
FIGHTING Twenty-
NFPA Standard. The horn shall suitable to mount directly to a Six point
WORKS) Eight point
standard single gang, double gang or 4'''' square electrical Zero Zero
Zero Zero
box, without the use of special adapter or trim rings.Shall One
Three
have suitable operating ambient temperature range : 0° to
45°C (Minimum)Humidity range: Minimum 93% RH at 100°F
(38°C) Approvals : UL listed / FM approved.
The Strobe shall be selectable at 15, 30, 75, or 110 cd''

''SIGNALING CABLE WITH PVC CONDUIT &

ACCESSORIES :
Surface conduit wiring with the following FPLR/ FPLP/ FPL
type UL listed / FM Approved / LPCB Approved cable. PVC
Eleven
PART-G-v : 02- Insulation for each core shall be FR (Fire Rated) & Drain Two
Thousand
STORIED wire, shield (Aluminum Foil tape/ PET tape) shall meet the Hundred
Nine
SECURITY minimum requirement as per NEC (National Electric Code) or and Thirty-
680 15.a Rm 50.000 239.001 11950.050 Hundred
BUILDING (FIRE NFPA 70 or BS. Jacket shall be Fire Rated. All electrical Nine point
and Fifty
FIGHTING contacts shall be of brass / copper connected through Zero Zero
point Zero
WORKS) connector or soldering (no twisting shall be allowed) . The One
Five
work shall be carried out as per direction & approval of the
Engineer in charge. a) 2C-1.5 sqmm (FPLR/ FPLP/ FPL )
cable with 1.5 sqmm (FR) ECC wire through PVC pipe of
minimum inner dia 25 mm having wall thickness of 1.5 mm''

681 PART-G-v : 02- 15.b 2C-2.5 sqmm (FPLR/ FPLP/ FPL ) cable with 2.5 sqmm (FR) Rm 100.000 313.001 Three 31300.100 Thirty-One
STORIED ECC wire through PVC pipe of minimum inner dia 25 mm Hundred Thousand
SECURITY having wall thickness of 1.5 mm and Three
BUILDING (FIRE Thirteen Hundred
point One

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 76/80
3/11/24, 2:55 PM View Form
FIGHTING point Zero
WORKS) Zero One

FIRE RATED DOOR : Supply & Installation of UL Listed /FM

Approved Fire Rated Door completed with Panic Bar. The
door shall be made with 1.5mm thick sheet steel painted with
Eight Lakh
approved red color over a coat of primer. Thickness of the
Fifty-Five Twenty-
leaf shall be 40mm and filled with fire proof / resisting
PART-G-v : 02- Thousand Eight
materials of minimum two hours rated.The Panic bar shall be
STORIED Two Thousand
Horizontal type, UL Listed/ FM approved made of Aluminium
SECURITY Hundred Two
682 16 Alloy / steel, chrome plated, c/w with security lock to Sqm 15.000 55217.001 828255.015
BUILDING (FIRE and Hundred
operated from outside. Door frame shall be made with same
FIGHTING Seventeen and Fifty-
sheet steel of similar thickness. Hinges shall be quite
WORKS) point Zero Five point
smooth, robust and aligned properly. Peripheral clearance of
Zero One Zero One
the shutter should be as per standard code of practice. The
Five
opening of the door should be in one direction.Door size shall
be minimum 1000mm (width) x 2100mm (height).
Measurement of the door shall include Frame.

Three Three
Thousand Thousand
PART-G-v : 02-
Six Six
STORIED Supply and installation of ''Exit light'' complete with
Hundred Hundred
SECURITY rechargeable battery and charge light and other necessary
683 17 Each 1.000 3681.001 and 3681.001 and
BUILDING (FIRE accessories suitable for AC / DC power supply (220V single
Eighty- Eighty-
FIGHTING phase) as per NFPA 101
One point One point
WORKS)
Zero Zero Zero Zero
One One

''Security System : IP Camera & Accessories : Type -A

Supply and fixing of 2 MP, varifocal , IP Bullet Camera
(including lens, bracket, housing) of following technical
specification or equivalent :
Image Sensor : 1/2.8'''' Progressive Scan CMOS , 2
Megapixel (minimum)
Min. Illumination : At least 0.052lux/F1.4(color, 30IRE) or
0.07lux/F1.6(color, 50IRE),
B/W: 0 Lux with IR
Shutter Speed : At least 1/25 s to 1/15000 s
Wide Dynamic Range : 120 dB or above
Lens Type and Focal Length : Varifocal lens, at least 3 to 9
mm
Focal Length & FOV : horizontal FOV 100°?37°, vertical FOV
: 52°?21° or above
Aperture : F1.6 maximum
Supplement Light Type : IR
IR Range : minimum 40 m
Seventy- Seven
Max. Resolution : 1920 (H) × 1080 (V)
Six Lakh
Video Stream : At least 2 streams ,Main Stream: 1080P (1
Thousand Sixty-
PART-G-vi : 02- fps?25/30 fps)
Three Three
STORIED Video Compression : H.265/H.264/MJPEG
Hundred Thousand
684 SECURITY 1 Region of Interest (ROI) : Off/ On Each 10.000 76384.001 763840.010
and Eight
BUILDING (CC TV Audio Sampling Rate : 8 kHz/16 kHz/48 kHz
Eighty- Hundred
SYSTEM WORKS) Audio Compression :
Four point and Forty
G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/MP3/AAC
Zero Zero point Zero
API : ONVIF (Profile S/Profile G/Profile T)
One One
Protocols : IPv4, IPv6, UDP, TCP, HTTP,HTTPS, RTP/RTCP,
IGMP, ICMP, NTP, DNS, DHCP, SMTP etc.
SNR : >55 dB
Day/Night Switch : Day, Night, Auto
On-Board Storage : Micro SD card : Ethernet Interface : RJ-
45 (10/100 Base-T)
Basic Event : Motion detection, Tamper Detection
Power Supply : '12 VDC ±5%, 24 VAC ±10% or
Power-over-Ethernet , PoE (802.3 at /af)
Power Consumption : maximum 15 Watt
Camera Material : Metal''
''Operating Temperature and humidity : 'Temperature :-43 ºC
to +50 ºC for continuous operation Humidity: 5% to 93% RH
non condensing
Protection : IP 66, IK10
Certifications : CE,UL,FCC
Country of origin : USA/Japan /UK/ EU countries or
equivalent accepted/ approved by the Engineer in Charge.''

685 PART-G-vi : 02- 2 ''Supply and fixing of 2 MP, PTZ Camera (including lens, Each 2.000 383448.001 Three 766896.002 Seven
STORIED bracket, housing) of following technical specification or Lakh Lakh
SECURITY equivalent : Eighty- Sixty-Six
BUILDING (CC TV Image Sensor : 1/2.8'''' Progressive Scan CMOS , 2 Three Thousand
SYSTEM WORKS) Megapixel (minimum) Thousand Eight
Min. Illumination : At least Color: 0.0186 lux /F1.6), B/W: 0 Four Hundred
Lux with IR Hundred and
Shutter Speed : 1/3 s to 1/30,000 s and Forty- Ninety-Six
Wide Dynamic Range : 120 dB or above Eight point point Zero
Focal Length : At least 4.8 to 135 mm Zero Zero Zero Two
Optical Zoom : 30 x or above One
Digital Zoom : 12x
Focal Length & FOV : horizontal FOV 58.3°?2.6°,
Aperture : At least F1.6 - F4.4
Supplement Light Type : IR
IR Range : minimum 180 m
Pan/Tilt range : 0°~360° ; -15°~90° or -90° to 20°( auto flip)
Pan speed : preset speed :240°/s
Tilt speed : preset speed :160°/s
Presets : minimum 256
Max. Resolution : 1920x1080 or above
Main Stream : Main Stream: 1920x1080 (1 fps?25 fps) with
at least 1 sub-stream
Video Compression : H.265/H.264/MJPEG
Audio Sampling Rate : 8 kHz/16 kHz/32 kHz/44.1 kHz/48
kHz
Audio Compression :
G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/MP3/AAC
API : ONVIF (Profile S/Profile G/Profile T)
Protocols : TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS,
DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS,

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 77/80
3/11/24, 2:55 PM View Form
IPv4, IPv6, UDP, PPPoE, ARP, SNMP etc.
SNR : ≥ 56 Db
Day/Night Switch : Day, Night, Auto, Schedule
Alarm : 1 input, 1 output
Audio : 1 input (line in), 1 output (line out)
On-Board Storage : Micro SD
Ethernet Interface : RJ-45 (10/100 Base-T)
Basic Event : Motion detection ,video tampering alarm
Power Supply : DC 12V /24 V /AC 24 V (±30%), PoE (802.3
at /af)
Power Consumption : maximum 25 Watt
Camera Material : Metal''
''Operating Temperature and humidity : 'Temperature :-43 ºC
to +50 ºC for continuous
Operation Humidity: 5% to 90% RH non condensing
Protection : IP 66 or above
Certifications : CE,UL,FCC
Country of origin : USA/Japan /UK/ EU countries or
equivalent accepted/ approved by the Engineer in Charge.''

''Network Rack 15U

Supply, installation of Network Rack of size 15U with
Twenty- Twenty-
following features or equivalent as per direction of the
Nine Nine
Engineer in charge.
Thousand Thousand
PART-G-vi : 02- Front Door: Tempered Glass side with Advanced Swivel Lock
One One
STORIED Side Panels: Solid Side Panel with Side Lock
Hundred Hundred
686 SECURITY 3 Anti-Dust Cable Entry: Convenient Cable brush panel for Each 1.000 29173.001 29173.001
and and
BUILDING (CC TV both cable entry and anti dust
Seventy- Seventy-
SYSTEM WORKS) Cooling Fan: Preinstalled 2pcs FAN with UK Power Cord on
Three Three
Top
point Zero point Zero
Loading Capacity: Welded Frame Structure ensue over
Zero One Zero One
60KG loading capacity.
Adjustable front and rear vertical rails''

''FIBER OPTIC CABLE

Supply, installation, testing & commissioning of fiber optic
cable (Indoor) with following specification or equivalent as One
PART-G-vi : 02- per direction of the Engineer in charge. Hundred Sixty-One
STORIED Specification: and Thousand
687 SECURITY 4 Armored single loose tube fiber optic cable (50 / 125 µm Meter 500.000 123.001 Twenty- 61500.500 Five
BUILDING (CC TV multi-mode, 6-core) suitable for internal & external Three Hundred
SYSTEM WORKS) applications in ducts or intra-building links in campus point Zero point Five
environments and having outer diameter of app. 6.5 mm and Zero One
weight app. 35.0 kg / km etc.. complete with all required
accessories.''

''UTP Cat-6 CABLE

Supply, installation, testing & commissioning of UTP
(unshielded twisted pair) Cat-6 cable with following
specification or equivalent as per direction of the Engineer in
charge. Physical specifications :
Weight : 25.6 lbs. /1,000 ft. (38.2 kg/km)
Jacket thickness : 0.022 in (0.56 mm)
Outside diameter : 0.232 in (5.89 mm)
PART-G-vi : 02-
Maximum pulling tension : 25 lbs. (11.34 kg)
STORIED Eighty Sixteen
Operating temperature : - 4°F to 1 40°F (-20°C to 60°C)
688 SECURITY 5 Meter 200.000 80.001 point Zero 16000.200 Thousand
Gauge : 23 AWG
BUILDING (CC TV Zero One point Two
Electrical specifications :
SYSTEM WORKS)
NVP (fastest pair @ 10 MHz) : 69%
Maximum DC resistance : 7.61 ohms / 100 m
Maximum DC resistance unbalance : 3%
Mutual capacitance at 1 kHz : 5.6 nF/100 m
ANSI/TIA-568-C.2 category 6.
ISO/IEC 11 801 : 2002 (edition 2) class E
CENELEC EN50173 : 2002 (edition 2) category 6
ETL : CMR''

689 PART-G-vi : 02- 6 ''Access Switch Type-3 (24 ports POE and 4 x 1G SFP slots) Each 1.000 186422.001 One Lakh 186422.001 One Lakh
STORIED Supply, installation, testing & commissioning of Access Eighty-Six Eighty-Six
SECURITY Switch (24 ports POE and 4 x 1G SFP slots) under the Thousand Thousand
BUILDING (CC TV following specifications & features or equivlent as per Four Four
SYSTEM WORKS) direction of the Engineer in charge. Hundred Hundred
Technical Specifications: Quality: ISO 9001/9002 for and and
manufacturer, FCC Class A/B for quality assurance Twenty- Twenty-
Enclosure Type: 1 RU, 19-in. Rack Mountable with Rack Two point Two point
Mounting Kit Architecture: Proposed switch should be Zero Zero Zero Zero
enterprise grade switch with x86 based CPU architecture. One One
Performance Feature:
The Switch should have 24 x 10/100/1000 Base-T PoE ports
and 4 x 1G SFP slots Switch should have minimum 370W for
PoE power with additional secondary power supply. The
switch should be able to deliver PoE power to end devices
without waiting for the switch OS to load fully.
Switch should support Software Defined Network (SDN) and
can be integrated with SDN controller if required in future.
Switching Performance : The Switch should have 24 ports
POE and 4 x 1G SFP slots slots. The switch should support
Following 56 Gbps switching capacity and 41.66 Mbps
Forwarding rate.''
''Switch should have minimum 2GB RAM and 4 GB Flash.
The switch should support 16000 MAC Addresses and 4096
VLAN IDs.
Switch should have slot/ports (excluding uplinks ports) for
minimum 120 Gbps of stacking bandwidth with dedicated
stacking ports and cables with minimum 8 switch in stack
Switch should be able to support 3000 IPV4 & 1500 IPV6
routing entries from day-1
Switch should support minimum 512 Switched Virtual
Interfaces.
Switch Layer 2 Services: The switch should support
Automatic Negotiation of Trucking Protocol, to help minimize
the configuration & errors. The switch should support IEEE
802.1Q VLAN encapsulation.
Switch should support IPv4 and IPv6The Switch should be
able to discover (on both IPv4 & IPv6 Network) the
neighboring device giving the details about the platform, IP

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 78/80
3/11/24, 2:55 PM View Form
Address, Link connected through etc., thus helping in
troubleshooting connectivity problems.
The switch should support Spanning-tree root guard to
prevent other edge switches becoming the root bridge. ''
See the Technical Specification.

''Supply, Installation, Testing & Commissioning of single door

networkable access control unit has on-board TCP/IP to
Eighty-
allow direct connection to a computer network including
Two Four Lakh
software with license (if required) of the following
Thousand Fourteen
PART-G-vi : 02- specification or equivalent-
Eight Thousand
STORIED Input voltage:12-24 Vdc +/- 20% ,micro SD supported,
Hundred One
690 SECURITY 7 Ethernet Communication:10BaseT/100Base-TX . Each 5.000 82826.001 414130.005
and Hundred
BUILDING (CC TV Inputs: At least for exit button and door contact,
Twenty- and Thirty
SYSTEM WORKS) Outputs: minimum 3 , relay type.
Six point point Zero
Necessary power supply unit, enclosure included.
Zero Zero Zero Five
Operating temperature: 0°C to +55°C.
One
Regulatory: CE,UL,FCC.
Accepted /approved by the Engineer-in-charge.''

''Supply and installation of Proximity Card reader of following

specification or equivalent- Twenty-
Two Lakh
PART-G-vi : 02- Typical card range: 6 cm minimum Two
Twenty-
STORIED Operating Voltage: 5-16 Vdc Thousand
Seven
691 SECURITY 8 Operating temperature:-35°C to +66°C Each 10.000 22700.001 Seven 227000.010
Thousand
BUILDING (CC TV Environmental Rating: Indor/Outdoor Hundred
point Zero
SYSTEM WORKS) Transmit Frequency:13.56 MHz or 125kHz point Zero
One
Certifications:CE,UL,FCC. Zero One
Accepted /approved by the Engineer-in-charge.''

Six Three
PART-G-vi : 02-
Hundred Thousand
STORIED Supply of proximity card of 13.56 MHz or 125 KHz Transmit
and AND
692 SECURITY 9 frequency with both side printable feature, accepted/ Each 5.000 614.001 3070.005
Fourteen Seventy
BUILDING (CC TV approved by the Engineer-in-charge.
point Zero point Zero
SYSTEM WORKS)
Zero One Zero Five

''Supply and installation of Electromagnetic door lock of

following specification or equivalent-
600lbs holding force Twenty-
Eleven
Dual voltage 12 & 24 Vdc Three
Thousand
PART-G-vi : 02- Current drawn 500mA / 250mA Thousand
Six
STORIED MOV surge protection Three
Hundred
693 SECURITY 10 Push-off button on armature for instant release Each 2.000 11657.001 23314.002 Hundred
and Fifty-
BUILDING (CC TV Dimension : - and
Seven
SYSTEM WORKS) Magnet : 250(L) X 40(W) X 26(D) mm +-10% Fourteen
point Zero
Armature Plate : 170(L) X 38(W) X 11(D) mm +-10% point Zero
Zero One
Operating Temperature : 0~55° C (32~131° F) Zero Two
Operating Humidity : 0~95% (non condensing)
Accepted /approved by the Engineer-in-charge.''

Twenty-
''Supply and installation of Exit button of following Four
Four
PART-G-vi : 02- specification or equivalent- Thousand
Thousand
STORIED controlled by door controller- unlock the door when it is Nine
Five
694 SECURITY 11 pressed Each 5.000 4908.001 Hundred 24540.005
Hundred
BUILDING (CC TV Operating Voltage : 10-14 Vdc or 125-250 Vac and Eight
and Forty
SYSTEM WORKS) Operating Temperature : -20°C - +55°C point Zero
point Zero
Accepted /approved by the Engineer-in-charge.'' Zero One
Zero Five

Thirty
Six
''Supply and installation of break glass unit for emergency Thousand
Thousand
PART-G-vi : 02- door release of following specification or equivalent- Six
One
STORIED Double pole double throw contacts (NO,NC,COM) Hundred
Hundred
695 SECURITY 12 Resettable with key Each 5.000 6135.001 30675.005 and
and Thirty-
BUILDING (CC TV Status indicator Seventy-
Five point
SYSTEM WORKS) Embedded or surface mounting options Five point
Zero Zero
Accepted /approved by the Engineer-in-charge.'' Zero Zero
One
Five

''Ceiling Speaker : Supply, Installation, Testing &

Commissioning of Professional heavy duty, ceiling mounted
speaker ideal for airports, lounges, convention centers,
corporate boardrooms, hotels / hospitality, houses of
One Lakh
worship, museums offices, of patois, spaces schools, Ten
Seven
PART-G-vii : 02- theaters and theme parks, superior sound quantity, wide Thousand
Thousand
STORIED dispersion and smooth off-axis coverage of following Seven
Three
SECURITY technical specification or equivalent- Hundred
696 1 Each 10.000 10737.001 107370.010 Hundred
BUILDING Frequency range (nominal): 85Hz to 18 KHz. (±3db). and Thirty-
and
(SOUND SYSTEM Nominal impedance: 8Ω Seven
Seventy
WORKS) Nominal sensitivity(1w, 2m) : 90dB SPL point Zero
point Zero
Components : LF & HF driver. Zero One
One
CE Certified/UL Listed
Country of Origin: USA, UK, Japan, EU Countries; suitable
for use in tropical country like Bangladesh. Model & sample
to be approved by the Engineer in charge. a) 6W-12W''

''Column Speaker: Supply, Installation, Testing &

Commissioning of Column / wall speaker ideal for airports,
lounges, convention centers, corporate boardrooms, hotels /
hospitality, houses of worship, museums offices, of patois,
spaces schools, theaters and theme parks, superior sound
quantity, wide dispersion and smooth off-axis overage, Thirty-Six
superior sound quality, wide dispersion and smooth off axis Eighteen Thousand
PART-G-vii : 02-
coverage, fast and easy installation of following technical Thousand One
STORIED
specification or equivalent- AND Hundred
SECURITY
697 2 Line voltage : 70V / 100V Each 2.000 18099.001 Ninety- 36198.002 and
BUILDING
Sensitivity : >85dB. Nine point Ninety-
(SOUND SYSTEM
Frequency response: 150Hz-15KHz. Zero Zero Eight point
WORKS)
Enclosure material : Plastic Line One Zero Zero
Dispersion angle : 100°. Two
CE Certified/UL Listed Country of Origin: USA, UK, Japan,
EU Countries; suitable for use in tropical country like
Bangladesh. Model & sample to be approved by the
Engineer in charge.
a) 10W - 15W''

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 79/80
3/11/24, 2:55 PM View Form
Seventeen Thirty-Five
''Supplying & Fixing of wall / pad mounted rack cabinet with
Thousand Thousand
PART-G-vii : 02- low noise, fan on top, 2 side door, cam lock, front door glass
Seven Five
STORIED with cam lock, 1 wall mounted power distribution unit, 6-way,
Hundred Hundred
SECURITY welded frame with epoxy power coating painted, reliable
698 3 Each 2.000 17792.001 and 35584.002 and
BUILDING structure, removable side panels, optional side locks, cable
Ninety- Eighty-
(SOUND SYSTEM entry on both top cover and bottom panel. (Foreign Made).
Two point Four point
WORKS) Model & sample to be approved by the Engineer in charge.
Zero Zero Zero Zero
a) Size: 600 x 450 x 635 mm or equivalent, 2 nos 4'' fan ''
One Two

PART-G-vii : 02- One

STORIED Hundred Seventy-
Speaker cables, 12 AWG (copper made twin core shielded ,
SECURITY and Fifty- Six
699 4 PVC Jacket, PE Insulation, Dielectric strength: minimum 500 Meter 500.000 152.001 76000.500
BUILDING Two point Thousand
Vac )
(SOUND SYSTEM Zero Zero point Five
WORKS) One

Twenty-
Four
Crore
Sixty-Eight
Lakh
Grand
246845046.158 Forty-Five
Total:
Thousand
AND
Forty-Six
point One
Five Eight

This Bill of Quantities is Electronically Signed by Mr. Md Hossain on behalf of HOSSAIN CONSTRUCTION (PVT) LTD

https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?formId=5043933&userId=49461&nture=Works&tenId=924961&procMtd=… 80/80