Scribd
Upload
45 views

Speed Sensor

This document provides information about an inductive sensor including its electrical design, sensing range, operating temperature range, housing material, and accessories included. It lists specifications such as output type, voltage rating, switching frequency, correction factors, and EMC compliance standards.

Uploaded by

Gunawanta Girsang
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

Speed Sensor

This document provides information about an inductive sensor including its electrical design, sensing range, operating temperature range, housing material, and accessories included. It lists specifications such as output type, voltage rating, switching frequency, correction factors, and EMC compliance standards.

Uploaded by

Gunawanta Girsang
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Inductive sensors

IIT207
IIB3022-BPKG/M/V4A/6m Inductive sensor Metal thread M30 x 1.5 Cable Increased sensing range Sensing range 22mm [nf] non-flush mountable

Electrical design Output

DC PNP normally open

Operating voltage [V] Current rating [mA] Short-circuit protection Reverse polarity protection Overload protection Voltage drop [V] Leakage current [mA] Current consumption [mA]

10...36 DC 100 pulsed yes yes < 2.5 < 0.5 < 10 (24 V)

Real sensing range [mm] Operating distance [mm] Switch-point drift [% / Sr] Hysteresis [% / Sr] Switching frequency [Hz]

22 10 % 0...17.82 -10...10 3...15 100

Correction factors

mild steel = 1 / stainless steel approx. 0.7 / brass approx. 0.5 / Al approx. 0.4 / Cu approx. 0.3

Operating temperature [C] Protection EMC

0...100 IP 68 / IP 69 K EN 61000-4-2 ESD: 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated: 10 V/m (80...1000 MHz) EN 61000-4-4 Burst: 2 kV EN 61000-4-6 HF conducted: 10 V (0.15...80 MHz) EN 55011: class B V4A (316S12); active face: PEEK (polyether ether ketone)

Housing material Function display Switching status LED Connection Wiring Core colours BK BN BU

yellow (4 x 90) PVC cable / 6 m; 3 x 0.34 mm

black brown blue

Accessories (included)
ifm electronic gmbh Teichstrae 4 45127 Essen

2 lock nuts
We reserve the right to make technical alterations without prior notice. GB IIT207 06.03.2003

You might also like