Scribd
Upload
13 views10 pages

Fuel Free Generator Presentation For Marine Application 2

The document describes a fuel-free magnetic generator called the INFINITY MG10. It produces clean energy continuously using electromagnetic fields and permanent magnets to drive a generator without requiring fuel. It is intended as a backup power source for ships that can run constantly with little maintenance and no fuel or dependence on external energy sources like solar or wind.

Uploaded by

doidelap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views10 pages

Fuel Free Generator Presentation For Marine Application 2

The document describes a fuel-free magnetic generator called the INFINITY MG10. It produces clean energy continuously using electromagnetic fields and permanent magnets to drive a generator without requiring fuel. It is intended as a backup power source for ships that can run constantly with little maintenance and no fuel or dependence on external energy sources like solar or wind.

Uploaded by

doidelap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Presentation marine application

Fuel Free Power Magnetic Generator


INFINITY MG10

Website: www.national-heavyind.com

Email: [email protected]

2018

Fuel Free Power Magnetic Generator


“INFINITY MG 10”

Engine Room

Engine, generator and gearbox – ship’s


propulsion system

Primary Diesel Generator


Ship’s infrastructure energy
supply
BackUp Electromagnetic
Generator – Infinity MG 10
The electromagnetic generator is a system to
supply the ship with power 24/7 (as a backup
generator in the first phase). This generator is
equipped with a UPS system in order to flatten the
peaks occurring when many users start to use the
infrastructure at the same time and to store the
energy produced by the generator while the system
is not in use.

During the time between charges the unit is


running on low RPMs or stands still and is slowly
recharging the batteries of the ship. The system
monitors the station and turns up the RPMs of the
unit automatically when more power is needed.
Our system is the optimal low-cost, self-sustaining
solution which requires minimum maintenance
and has an extreme long life.

Introduction

The “INFINITY MG 10” produces clean, green


energy, twenty-four hours a day, seven days a
week, three hundred and sixty five days a year,
using electromagnetic engine providing power
which drives a regular electric power generator
motor by mechanical transition of the rotation of
the engine to the generator. This technology uses
the permanent magnet field of a rotor
driven by a controlled electromagnetic field
of the stator in a manner that allows it to
produce enough energy to drive the
generator and supply the control automatic
to steer the magnetic field of the the stator
to perpetuate the cycle and to supply the
rest of the energy to the consumer.
Existing technology, that is used to produce
green energy is ether wind of solar is
marked by various flows and problems, that make this technologies ether not feasible
financially or very complicated in management or disturbing to people and nature.
Solar systems knowingly have a relatively high production and installation costs and
require a lot of effort in kipping them intact during the usage, they require a lot of
space and are not applicable is regions with low sun activity.
Wind turbines are even more expensive and
complicated in terms of installation and
management.
The biggest problem though is that all these
technologies rely of the natural energy
sources and depend on the availability of
those.
Thus being said we would like to point out,
that our goal whilst working on our projects
was to create a system and technology, that
would allow to produce green, cheap energy which can be provided at any time to
any consumer at any point. Our unit is a system that generates power in a closed
self-perpetuating cycle independently of where it is placed: ether home, industrial
facility, vehicle, ship or any other place. It does not require any feed stock of fuel of
any kind and can work constantly for decades with minimum maintenance mostly
caused through bearings that require replacement over very long time distances.

The solution

Our power unit doesn't need a constant


supply of any fuel, it produces free energy
and our device only needs to be plugged in
to receive an initial amount of energy to start
running as a magnet generator. It utilizes
magnetic forces to produce energy. To put it
simple like poles repel while unlike poles
attract - this force is what drives the rotor
and stator construction. Magnets are
alternately imbedded in the rotor with either
plus or minus pols facing the outside. While
electromagnets are used for the stator
construction wire coil wound around an iron
core serves as an electromagnet just like the
fixed magnets the electromagnets are also in
alternate order. The magnetic field of the
coils changes in accordance to the circulation of the current. Since unlike pols attract
the rotor moves in the direction of the attraction and away from the like poles that
repel each other. The movement would stop it this point. By changing the circulation
of the current the electromagnets’ pools are reversed and the rotor continues to move.
The pole reversal is perfectly timed by our control unit resulting in constant rotation
which we use to generate energy and just after a few minutes the power unit can be
unplugged and produces a enough free energy for a house, equipment, vehicle back-
up or primary supply and so on.

The Magnetic Generator with an organized structural arrangement of is complex


system permanent magnets and bifilar coils and PCB controller with a specially
designed software that are used to generate and dispense electrical energy.
Initial start is performed by a battery or any other external source of energy to help
motor reach needed RPM.
After that the external source can be disconnected. The device is able to operate in
autonomous mode and maintain its RPM regardless of amount of useful energy
being consumed.
 Continuous operation: up to 8000 hours until maintenance
 Life cycle: at least 20 years
 Annual maintenance: consumables inspection/replacement
 Noise generation: 60dB without soundproof casing
 Heat generation: insignificant with internal cooling
 Operation temp range: with heatproof casing up to 70°C for hot countries, with coldproof
casing down to -40°C
 Legal permits: KC and CE marks are in the process of acquisition
 Warranty: will be determined by a distributor but at least 2 years
 AS service: will be provided by a distributor in your country

The magnetic generator MG10 consists of 250 neodymium magnets and 250 bifilar
coils. The constructional feature that enables generating electrical energy is the
precise angular alignment of the coils and magnets inside the drum and the switching
regulations to suppress back EMF and effectively collect accumulated energy inside
the electromagnets (coils). As a magnet starts approaching a coil, at a certain point
the voltage of the coil increases along with the amount of charge it can transfer. Once
the switching regulator detects the maximum voltage of the coil, it switches off the
coil. The magnetic field of the coil that has been formed after excitation of the coil
will tend to collapse generating a back EMF in the coil windings. The designed
software of the generator is able to suppress the parasitic current and transform it
into usable electrical energy that can be utilized by an end user.

You might also like