Scribd
Upload
9 views

1 Way Slab Design - IS Code

Uploaded by

Eswar reddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
9 views

1 Way Slab Design - IS Code

Uploaded by

Eswar reddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Floor One Way Slab Design One way slab

Slab Mark : S7 Slab Mark :


Grade of Concrete (N/mm2) : 30 Grade of Concrete (N/mm2) :
Grade of main Steel (N/mm2) : 500 Grade of main Steel (N/mm2) :
Grade of Distr. Steel (N/mm2) : 500 Grade of Distr. Steel (N/mm2) :
End Condition : (1, 2, 3 & 4) Continuous at ends 3
Effective span of slab (m) : 2.6 Effective span of slab (m) :
Trial depth of section (mm) : 200.00 Trial depth of section (mm) :
Assumed depth of section (mm) : 200.00 (200-44mm)
Loading on slab
(i) Dead load (kN/m2) : 5 Dead load+Finish load
(ii) Floor Finish load (kN/m2) : 0 (ii) Floor Finish load (kN/m2) :
(iii) Live load (kN/m2) : 5 Live load
Total load (kN/m2) : 10.00 Total load (kN/m2) :

Design working moment (kN-m) : (w*l*l/9) 7.51 W*L*L/9 used conservatively


Depth of section required (mm) : 83.19 as per IS 456 table 12
Effective depth of section provided (mm) : 176 Effective depth of section provided (mm) :

Main Steel :
Ast calculated for factored load
Area of steel required (mm2) : 240.00 (within the formula)
Diameter of bar (mm) : 8 Diameter of bar (mm) :
Spacing steel required (mm) : 300 Spacing steel required (mm) :
Area of steel provided (mm2) : 167.55 Area of steel provided (mm2) :

Check for serviceability :


pt of steel provided : 0.10 pt of steel provided :
Depth of section required (mm) : 121.42 Depth of section required (mm) :

Distribution Steel :
Area of steel required (mm2) : 240.00 Area of steel required (mm2) :
Diameter of bar (mm) : 10 Diameter of bar (mm) :
Spacing steel required (mm) : 300 Spacing steel required (mm) :

Check for Shear stress :


Max Shear force (kN) : w*l*0.6 15.6 0.6 is used as factor as per
Max Shear stress (N/mm2) : 0.133 IS 456 table 13
36.59 ###
Permissible shear stress (N/mm2) : 0.286 Permissible shear stress (N/mm2) :

Summary : 2.6 m Summary :


Thickness of slab : 200 mm Thickness of slab :
Main Steel : Y8 @ 300 Main Steel :
Distribution Steel : Y10 @ 250 Distribution Steel :
Designed by : BSAmaldarDate : 05/07/2024 751936616.xlsx Design of two-way slab

Design of Two way slab subjected to UDL

Slab Mark : S3
Grade of Concrete (N/mm2) : 20
Grade of main Steel (N/mm2) : 415
Grade of Distr. Steel (N/mm2) : 250
End Condition : Continuous 2
Type of Panel : Two-way Continuous 1-ly 7
Effective short span of slab lx (m) : 4
Effective long span of slab ly (m) : 5.5
Value of a : 1.375
Trial depth of section (mm) : 138.89
Assumed depth of section (mm) : 210
Loading on slab
(i) Dead load (kN/m2) : 5.25
(ii) Floor Finish load (kN/m2) : 1.5
(iii) Live load (kN/m2) : 3
Total load (kN/m2) : 9.75

Factored Mx (Support) (kN-m) : 12.32


Factored My (Support) (kN-m) : 0.00
Factored Mx (Midspan) (kN-m) : 9.24
Factored My (Midspan) (kN-m) : 6.71
Depth of section required (mm) : 111.91
Effective depth of section provided x (mm) : 181
Effective depth of section provided x (mm) : 173

Area of steel
X-direction, Support
Area of steel required (mm2) : 292.85
Diameter of bar (mm) : 8
Spacing steel required (mm) : 150
Y-direction, Support
Area of steel required (mm2) : 252.00
Diameter of bar (mm) : 8
Spacing steel required (mm) : 175
X-direction, Midspan
Area of steel required (mm2) : 252.00
Diameter of bar (mm) : 8
Spacing steel required (mm) : 175
Y-direction, Midspan
Area of steel required (mm2) : 252.00
Diameter of bar (mm) : 8
Spacing steel required (mm) : 175

Check for serviceability :


pt of steel provided : 0.17
Depth of section required (mm) : 182.37

Distribution Steel :
Area of steel required (mm2) : 157.50
Diameter of bar (mm) : 6
Spacing steel required (mm) : 175

Summary : 4 m x 5.5 m
Thickness of slab : 210 mm
Main Steel :
X-direction support steel : Y8 @ 150
Y-direction support steel : Y8 @ 175
X-direction midspan steel : Y8 @ 175
Y-direction midspan steel : Y8 @ 175

Distribution Steel : R6 @ 175


Designed by : D H DahanuwalaDate : 05/07/2024 751936616.xlsx

Slab
Slab Type End Condition Length Thickness X-Dir (Support) X-Dir (Midspan) Y-Dir (Support) Y-Dir (Midspan) Distribution steel
Mark
S1 One way slab Continuous at ends 2m 225 mm Y12 @ 300 Y12 @ 300 -- -- R6 @ 75

You might also like