Scribd
Upload
24 views1 page

Aci Foot VL Load

Uploaded by

Samer Alremawi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views1 page

Aci Foot VL Load

Uploaded by

Samer Alremawi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Footing 1 Checked by Approved by

Subject (Type I)
-
Building Cargo
Design of Isolated Footing with Vertical Load Only - According to ACI 318M-99
Bearing Capacity = 35.00 t/m2
Concrete Cylinder Strength (f ' c ) = 350 kg/cm2 Reif. Steel Ult .Strength (f y ) = 4200 kg/cm2
Soil density (Gs) = 1.80 t/m3

Footing ID: f2
Ultimate Column Load = 200.00 t A1 = 0.21 m2
Service Column Load = 133.33 t A2 = 2.85 m2
200.00 t
Column Dimensions
Length = 70.00 cm
Width = 30.00 cm
trc
Footing Dimensioning tpc
Required Bearing Area on soil = 4.19 m2
tpc Lrc tpc

Plain Concrete Dimensions Chosen Plain Concrete Dimensions Reinforced Concrete Dimensions
Length = 2.30 m Length = 2.90 m Length = 2.90 m
Width = 1.90 m Width = 2.50 m Width = 2.50 m
Thickness = 0.10 m Thickness = 0.10 m Thickness = 0.60 m
Depth = 0.55 m
Final stress under P. C. footing = 18.83 t/m2 (Safe)
Final stress under R. C. footing = 18.81 t/m2 (Safe)
Nominal Bearing strength of column = 437.33 t (Safe)
Nominal Bearing strength of footing = 874.65 t (Safe)

Footing Reinforcement I
Bearing Pressure (Ultimate Load) = 28.17 t/m2 tpc
Max. Ult. Bending Moment (Sect. I-I) = 31.76 m t/ m' II
Max. Ult. Bending Moment (Sect. II-II) = 31.76 m t/ m'
Wrc
Bar sizes to be chosen are ( 12, 16, 20, 22, 25, 32, 40)
As I-I = 15.59 cm2 As I-I(chosen) = 8 f 16 / m' tpc
As II-II = 15.59 cm 2
As II-II(chosen) = 8 f 16 / m'
r = 0.08 rb tpc Lrc tpc

Check Wide Beam Action ( Shear )


Area subject to Shear stress = 1.38 m2
Maximum Allowable Footing Resistance For Shear = f Vn = 0.85 * (( f ' c) ^ 0.5 * b * d / 6)= 115.24 t
Force Acting On Footing Due To Shear (Vus) = 38.74 t < 115.24 t (Safe)

Check Two Way Action (Punching)


Area subject to Punching shear = 6.19 m2
Perimeter Resisting Punching shear (bo) = 4.20 m
Maximum Allowable Footing Resistance to Punching is the Least of :
1- 0.85*((f ' c )^0.5*bo*d)/3 = 387.21 t
2- 0.85*((1+2/bc )*(f ' c )^0.5*bo*d/6) = 359.55 t
3- 0.85*(((as *d/bo)+2)*(f ' c )^0.5*bo*d/12) = 700.66 t

where, b c is the ratio of long side to short side of the column, concentrated load or reaction area
and, a s is 40 (for interior columns)

Punching Force acting on Footing (Vps) = 174.33 t < 359.55 t (Safe)


ACI-Foot-VL load - Rev. 1.0 1/1 5/7/2024

You might also like