Scribd
Upload
37 views3 pages

High Heat Silver MSDS

This document is a material safety data sheet for a high heat resistant silver coating. It provides information on the product identification, composition, hazards, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and other relevant details.

Uploaded by

johannvw2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views3 pages

High Heat Silver MSDS

This document is a material safety data sheet for a high heat resistant silver coating. It provides information on the product identification, composition, hazards, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and other relevant details.

Uploaded by

johannvw2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

No.

: HHR SILVER
Date Issued: DECEMBER 2014
Pages: 3
Version: 1.1
Revised Date: 24 August 2023

MATERIAL SAFETY DATA SHEET


COMPANY DETAILS
Name: MARINDEC PAINTS (Pty) Ltd. Emergency Tel. No.: +27 (11) 908 1056
Address: 21 FUCHS STREET
ALRODE
ALBERTON
SOUTH AFRICA
Tel: +27 (11) 908 1056
Fax: +27 (11) 908 4828
1. Product and Company Identification:
Trade Name: HIGH HEAT RESISTANT SILVER Chemical Abstract No.:
Chemical Family: Silicone based coating NIOSH No.:
Chemical Name: Hazchem Code: 3 [Y]
Synonyms: HIGH HEAT ALUMINIUM UN No.: 1263

2. Composition:
Hazardous components: ALIPHATIC HYDROCARBON SOLVENTS
EC Classification: F, Xn
R Phrases: R11, R20/21, R41, R65
S Phrases: S2, S13, S16, S51, S62

3. Hazardous Identification:
Main hazard: Solvent vapour
Flammability: Flammable
SAPMA Health Rating: 2-MODURATE – Temporary or minor injury possible even if treatment given
Eye effect: eyes: Highly irritating and risk of irreversible damage
Health effects - skin: Highly irritating. May be absorbed through intact skin. Risk of dermatitis
Health effects – ingestion: Harmful – May cause lung damage if swallowed.

No carcinogenic, mutagenic or genetic effects established.


May have short term environmental effects; contain, monitor & remove

4. First Aid Measures:


Product in eye: Flush with water for 15 minutes. Seek medical attention
Product on skin: Wash with soap and water. Seek medical attention if irritation persists.
Product ingested: Do not induce vomiting. Always seek medical attention.
Product inhaled: Remove to fresh air. Restore breathing. Seek medical attention.

5. Fire Fighting Measures:


Extinguishing media: Dry chemical, Foam, Carbon dioxide, Water fog.
Special hazards: Vapours are heavier than air and will accumulate forming explosive concentrations.
Protective clothing: Self contained breathing apparatus and complete body protection.

6. Accidental Release Measures:


Personal precautions: Appropriate PPE and equipment.
Environmental precautions: Contain all spills. Do not allow to run into drains.
Small spills: Soak with absorbent, dispose of in accordance with local regulations.
Large spills: Evacuate area of unprotected personnel. Eliminate all ignition sources.

7. Handling and Storage:


Suitable material: Stable under normal conditions.
Handling / Storage precautions: Keep away from heat, sparks, open flames and strong oxidising agents.
8. Exposure Controls / Personal Protection:
Engineering Control measures: Ensure adequate ventilation
Personal Protection–respiratory: Approved respirator in confined spaces
Personal Protection–hand: Impervious gloves
Personal Protection–eye: Chemical goggles
Personal Protection–skin: Protective clothing
Other Protection: Use only with ventilation to keep exposure below guidelines

Name OEL (mg/m³) STOEL (mg/m³)


HYDROCARBON SOLVENT BLEND 188 720
XYLENE 434 560

9. Physical and Chemical Properties:


Appearance: Opaque liquid (grey/aluminium in colour)
Odour: Aromatic
PH:
Melting Point: Not Applicable
Flash Point: < 32°C (BS 3900 PART A8)
Flammability: Flammable
Auto-flammability: Not Applicable
Explosive Properties: Not Applicable
Vapour Pressure:
Density: 0.9 g/cm³ ± 0.2
Solubility - water:
Solubility - solvent: Organic Solvent

10. Stability and Reactivity:


Conditions to avoid: Strong oxidising agents, heat, sparks and open flames.
Incompatible materials: Strong oxidising agents.
Hazardous decom Products: Carbon monoxide, nitrogen oxides and unidentified organic compounds.

11. Toxicological Information:


Skin and eye contact: Aspiration of the lungs.
Chronic Toxicity: Prolonged contact may result in dermatitis.

12. Ecological Information:


Aquatic toxicity - fish: Toxic
Aquatic toxicity - daphnia: Toxic
Aquatic toxicity - algae: Toxic
Biodegradability: Readily biodegradable
Bio-accumulation: Does not bio-accumulate significantly
Mobility: Float on water.

13. Disposal Considerations:


Disposal methods: In accordance with local regulations.
Disposal of packaging: Dispose to licensed disposal contractor.

14. Transport Information:


UN No. : 1263
Shipping Name Paint or Paint Related Material
Packaging Group II
Class 3

15. Regulatory Information :


EC hazard classification : F, Xn
Risk phases R11 Highly flammable.
R20/21 Harmful by inhalation and contact with skin
R41 Risk of serious eye damage
R65 Harmful – may cause lung damage if swallowed
Safety phases S2 Keep out of reach of children
S13 Keep away from food, drink and animal food
S16 Keep away from sources of ignition - No smoking.
S51 Use in well ventilated areas only.
S62 If swallowed, do not induce vomiting – seek medical advice immediately.
16. Other Information

Take precautionary measures against Static Discharges.


In case of discomfort always seek Medical Advice.

Limitation of Liability – The information in this data sheet is based upon laboratory tests we believe to be accurate and is intended for guidance
only. All recommendations or suggestions relating to the use of the products made by Marindec Paints, whether in technical documentation, or in
response to a specific enquiry, or otherwise, are based on data which to the best of our knowledge are reliable. The products and information are
designed for users having the requisite knowledge and industrial skills and it are the end-user’s responsibility to determine the suitability of the
product for its intended use.
Marindec Paints has no control over either the quality or condition of the substrate, or the many factors affecting the use and application of the
product. Marindec Paints does therefore not accept any liability arising from loss, injury or damage resulting from such use or the contents of this
data sheet (unless there are written agreements stating otherwise).
The data contained herein are liable to modification as a result of practical experience and continuous product development.
The data sheet replaces all previous issues and it is therefore the user’s responsibility to ensure that this sheet is current prior to using this product.

You might also like