0% found this document useful (0 votes)
24 views2 pages

Ecosoft MO3 8inch RO System

Uploaded by

vietluu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
24 views2 pages

Ecosoft MO3 8inch RO System

Uploaded by

vietluu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ECOSOFT MO3

8" REVERSE OSMOSIS SYSTEM

APPLICATIONS
Process water, rinse water, steam boilers, heating
and cooling circuits, agriculture, desalination, food
and beverage, utility water treatment.

EQUIPMENT:
• Grundfos® CR 10-12 high pressure pump 1 pcs
• 8040 membrane housing 3 pcs
• BB20 sediment prefilter 3 pcs
• Motorized valves 2 pcs
(feed water in, flush out)
• Balancing valves 2 pcs
(concentrate reject, concentrate recycle)
• Electrical cabinet with Ecosoft controller 1 set
• Piping, instrumentation, steel frame 1 set

OPTIONS
• Filmtec™ XLE-440 / ECO PRO-440
or Ecosoft ELP-8040 membranes
• Dosing pump for antiscalant or other RO chemicals
• Permeate inlet for permeate membrane rinse Ecosoft reserves the right to amend the product's system architecture
• Raw water mixing line provided that its functionality and usability will not deteriorate

CONNECTION PORT SIZES: PHYSICAL PARAMETERS:


Influent water G 1½″ Approximate dimensions (bare) 1.90 × 1.10 × 1.95 m
Permeate G 1″ (Width × Depth × Height, ±5%)

Concentrate G 1½″ Approximate dimensions (crated) 2.10 × 1.20 × 2.22 m


(Width × Depth × Height, ±5%)
CIP inlet G 1½″
Approximate weight (bare) 340 kg
CIP return G 1½″
Approximate weight (crated) 430 kg
CIP permeate G ½″
Antiscalant dosing port G ½″

ECOSOFT MO3 8" REVERSE OSMOSIS SYSTEM

Flow capacity,
Code Product Membranes**
m3/h (GPH)

MO3TP5 Ecosoft MO3 RO System 3–4 (800–1 060) 3/80 х 40

** Membranes are not included

22
FI
02
01
RV-01
PVC DN32
G 1″

CV-01 FI
02
PVC DN25 02
RV-02
PVC DN25
G 1″

01
PI
05 G 1½″
MV-02
03 G 1½″ CONCENTRATE
ECOSOFT MO3 RO FLOW CAPACITY GRAPH
TECHNICAL SPECIFICATION PS PI BV-04
PI PS PI 02 03 (WITH XLE-440 MEMBRANES)
PVC DN32
01 01 02
02 5 25 °C
Permeate capacity 1 3 m /h 3
03 PI 01 PI PS
03 03 04
02 4,803 06 03
21
FEED GV-01 15 °C F
Permeate recovery
WATER
2
75% G 1″ 03 PERMEATE W
4,6 CE FI
02
01 03
02 20 5 °C
G 1″
CV-02 PVC DN32
Maximum TDS 01 3000 mg/L 01 4,4 PVC DN25
G ½″
Pressure vessels 19
MV-01 G ½ G ½″ G 1½″ M
PJE DN40 4,2

Permeate flow rate, m³/h


G 1½″

Permeate flow rate, GPM


Influent flow demand 4…6 m3/h (service )
Grundfos CR 5-20 BV-01
PVC DN25
BV-02 BV-03 18
BB20 filter PVC DN32 PVC DN32 PVC DN15
R 1½″ 4
housings
G 1″
10 m /h (rinse)
3 CIP IN CIP CIP 17
3,8 RETURN PERMEATE

Operating pressure 8…12 bar 3,6 16

Maximum pressure 14 bar 3,4 15

PIPE SPECIFICATIONS VALVE AND INSTRUMENT SPECIFICATIONS


3,2 14 PIPE
Electrical
01
requirements
PVC pipe 50 mm O.D.
380…400 V, 50 Hz (3 ph) 01
Regulating Valve 3 PI Pressure gauge FI
Rotameter
02 PVC pipe 32 mm O.D. Ball Valve Motorized Valve (panel mount) 13 02

Electrical
03 power
PE hose ¼″ O.D. 4 kW Globe Valve
2,8 PS Pressure switch CE Conductivity probe
03
Check Valve (panel mount) (process mount) 12 04

Prefilter rating 5 μm 2,6


11
2,4
1
depends on feed water TDS, temperature, and permeate 0 1000 2000 3000 4000
recovery — see graph on the right
Feed water total dissolved solids, mg/l
2
for low scaling/fouling water
Permeate flow rates are calculated under the following conditions:
• 2 bar influent water pressure
• 0 bar backpressure in the permeate line
• fresh membranes
• XLE-440 membrane

PIPES AND INSTRUMENTS DIAGRAM


MO33XLWE0UN MO

Ecosoft MO3TP5 Ecoso


Reverse Osmosis System Rever
Piping and Instrumentation Diagram Pipin

CONCENTRATE RECYCLE

FI
02
01
RV-01
PVC DN32
G 1¼″

CV-01 FI
02
PVC DN25 02
RV-02
PI PVC DN32
G 1″
05

03 01
PI PS PI
G 1½″
01 01 02 MV-02
PI G 1½″ CONCENTRATE
04 04 04
PS PI BV-04
02 03 PVC DN40
02
03 01 PI PS
03 06 03
FEED GV-01
WATER G 1″ 03
PERMEATE
CE FI
02 01 02
03
G 1″
CV-02 PVC DN32 G ½″
01 01 PVC DN25
MV-01 Pressure vessels
G ½″ G ½″ G 1½″ PJE DN40
G 1½″
PVC DN25
Grundfos CR 10-12 BV-01 BV-02 BV-03
BB20 filter PVC DN40 PVC DN40 PVC DN15
R 1½″
housings
G 1″ CIP IN CIP CIP
RETURN PERMEATE

PIPE SPECIFICATIONS VALVE AND INSTRUMENT SPECIFICATIONS PIPE


01 PVC pipe 50 mm O.D. 01
PI Pressure gauge FI
02 PVC pipe 32 mm O.D. Ball Valve Regulating Valve Motorized Valve Rotameter 02
(panel mount)
03 PE hose ¼″ O.D. 03
PS Pressure switch CE Conductivity probe
Globe Valve Check Valve (panel mount) (process mount) 04

23

You might also like