Scribd
Upload
36 views

Foundation A

This document provides design calculations for the reinforcement of a concrete pad foundation with a column. It includes dimensions, load calculations, bearing pressure calculations, bending and shear reinforcement requirements, and punching shear checks.

Uploaded by

Mano Har
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
36 views

Foundation A

This document provides design calculations for the reinforcement of a concrete pad foundation with a column. It includes dimensions, load calculations, bearing pressure calculations, bending and shear reinforcement requirements, and punching shear checks.

Uploaded by

Mano Har
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Spreadsheets to BS 8110 The Concrete Centre

Client Made by Date Page


Location Foundation A Single column
PAD FOUNDATION DESIGN to BS 8110:2005 base Checked Revision Job No
Originated from RCC81.xls v3.5 on CD © 2006 TCC -

MATERIALS fcu 45 N/mm² h agg 20 mm gc 1.5 concrete


fy 500 N/mm² cover 75 mm gs 1.15 steel
Densities - Concrete 25 kN/m³ Soil 0 kN/m³ steel class A
Bearing pressure 200 kN/m² (net allowable increase)

DIMENSIONS mm
BASE COLUMN
L = 2150 h = 700
B = 1650 b = 400
depth H = 400
ex = 0 ey = 0

COLUMN REACTIONS kN, kNm characteristic Plot (to scale) Key


DEAD IMPOSED WIND
Axial (kN) 48.0 10.5 -26.5 STATUS VALID DESIGN
Mx (kNm) 1.0
Grnd Brg Pressure 13%
My (kNm) 5.0
Hx (kN) 3.0 Bending fsx 7%
Hy (kN) 1.0
(As/Asprov) fsy 9%

Overturning FOS = 8.70 Shear v xx 3%


Uplift FOS = 3.15
v yy 3%

BEARING PRESSURES kN/m² characteristic punching 10%


CORNER 1 2 3 4
0% 25%
no wind 26.5 26.5 26.5 26.5
with wind 22.8 26.3 11.8 15.2 Efficiency

REINFORCEMENT . .
Mxx = 10.3 kNm Myy = 9.9 kNm
b = 1650 mm b = 2150 mm
d = 319 mm d = 307 mm
As = 78 mm² As = 78 mm²
PROVIDE 8 H12 @ 225 B1 PROVIDE 10 H12 @ 225 B2
As prov = 905 mm² As prov = 1131 mm²
. .
BEAM SHEAR . .
Vxx = 16.0 kN at d from col face Vyy = 16.8 kN at d from col face
v= 0.030 N/mm² v= 0.025 N/mm²
or Vxx = 3.7 kN at 2d from col face or Vyy = 1.8 kN at 2d from col face
v= 0.007 N/mm² v= 0.003 N/mm²
vc = 0.452 N/mm² vc = 0.456 N/mm²

PUNCHING SHEAR . .
d ave = 313 mm u crit = 5956 mm
As prov = 0.172 % v max = 0.184 N/mm² at col face
v = 0.044 N/mm² vc = 0.454 N/mm²

You might also like