Find-It-In-Front: Section 3 details the

Dr. Pinball Section Service Menu!

The inside cover & the front 16 pages cover the basics: Diagnostics, Audits, Adjustments, Utilities
Fuses,
Fuses, Matrixes,
Matrixes, Adjustments,
Adjustments, Audits,
Audits and
and more!
more! (Installs, USB, etc.) and Tournament information!

Find-It-In-Front Section 1 Section

Section 2:
2 Section 3 Section 4 (Pink) Section 4 (Blue) Sec. 5 (Yellow) Appendixes
Dr. Pinball Section After Set-Up Game Op. & Features Service Menu System Parts ID. & Location Drawings for Major ... Schematics, Wiring ... A – J Historical Data

Indiana Jones™ ©2008 Lucasfilm Ltd. & TM. Stern Pinball, Inc. All Rights Reserved.

Your Parts Sales & Technical Support Team

Joe Blackwell Patrick Powers Chas Siddiqi
DIRECTOR, X X
Parts Sales & Technical Support Technical Support
Technical Support ENGINEER ENGINEER

Dorothy Brown J. Alfer

X Technical Support
Parts Sales Documentation
SUPERVISOR ADMINISTRATOR

Stern® Pinball, Inc.

Pinball Service Game Manual All Rights Reserved.
Printed in the U.S.A.
Please call, eMail or visit us online for technical support, questions or comments regarding this pinball game. May 2008

Go to www.sternpinball.com and Find Service Game Manual (with updates), Game Code,
click Tech. Support & Parts Sales Appendixes, Coin Cards, Service Bulletins and much more!
SPI Part Number
• Toll-Free: 1-800-KICKERS (542-5377) or 1-708-345-7700 • eMail: [email protected] • 780-50A4-00
 +2:7283'$7(<285*$0(&2'()256$06<67(00$&+,1(6
USB Compatible Memory Stick (aka Thumb, Flash or Jump Drives) required to copy game code into system.
S.A.M. System compatible, tested & SPI approved USB Memory Sticks 128MB+
available through your local distributor: Ask for SPI Part Number 970-0128-00
* to get the Memory Stick with the latest Game Code copied to it, add "the game title name" to above part number.
STYLE, COLOR, SIZE AND MANUFACTURER SUBJECT TO CHANGE.

Game Code is subject to change. Update this game with the

latest code downloaded from our website, from another game or
order through your local distributor (use SPI PN + name above).
Upon power-up the display will describe the version of code
installed in your game. When directed to do so (via Service
Bulletin or website announcement) you will need to update your
code ... with the BOOT FLASH EPROM* installed, here’s how:
STEP 1 Open the Back Box and locate the 8-Position x Green xx Red Buttons x Black
Dip Switch (SW1 on the CPU/Sound Board). Button Press to move Button
STEP 2 Switch Dip Switch #8 to ’ON’. Press to < Left , Right >. Press to
(*BOOT FLASH EPROM must be installed.) Escape Press to – Decrease Enter
Back or + Increase values Select
STEP 3 Press the White Reset Button (S1 RESET on the (or Exit). or to change settings. (or ‘OK’).
CPU/Sound Board) or Power Cycle the game OFF/ON
(ON/OFF Switch is located on the outside of the cabinet bottom, front right).
STEP 4 Using the 4-Button Service Switch Set (inside the Coin Door):
4A } Press [SELECT] to begin. 67(3
4B } With the "UPDT" Icon highlighted, press [SELECT].
4C } Insert the Memory Stick [with latest file(s)] into the USB Port.
4D } If more than one file is present on the Memory Stick,
press [<] or [>] to locate your file. Press [SELECT] to update.
4E } Follow on-screen prompts. $
&386RXQG%RDUG 6$06\VWHP
67(3 %
WHITE
RESET

6
BUTTON
(S1 RESET)

&

5
5
CR2430
USB
1.1/2.0
PORT
'
3 Volts Memory
Lithium Stick
COIN CELL
BATTERY
67(3& IF MORE THAN ONE FILE IS PRESENT ON MEM-
ORY STICK, PRESS [<] or [>] TO LOCATE ...

67(3( FOLLOW ON-SCREEN PROMPTS

67(3 5
8-Position BOOT
SW1 DIP FLASH
SWITCH 32-Pin

6
( #8 at 8MB
the Top) EPROM
You can also retrieve your latest code
Switch #8 from another game! From the
to the ’ON’
Position USB MENU via the UTILITIES
67(3 MENU, select the "BKUP" Icon
instead and download to your
Memory Stick. Review the
end of Section 3, Chapter 5.

! Quick Tip ~ Try backing up your current code prior to installing your new code,
just in case your Memory Stick file was corrupted by a computer glitch while you were copying / downloading.
Got confused? Comments? Questions? Call Technical Support at 800-542-5377 or 708-345-7700 (Option 1).
 )RU3URSHU2SHUDWLRQRIWKLV3LQEDOO*DPH
!3LQEDOOVPXVWEHLQVWDOOHGLQWKHIURQW%DOO7URXJK
RI!3LQEDOOVZLOODXWRPDWLFDOO\IHHGLQWRWKH$UN$VVHPEO\

Operation Note: Switch 17

(Ark Auto Load) is used to
determine if MORE than four
( 4 ) pinballs are present in
the trough (extra pinballs
will automatically feed into the
Ark Assembly, upper right Playfield).

%DFNER[)XVHV 
&DELQHW)XVHV
3OD\ILHOG)XVHVDQG
&DELQHW6ZLWFKHV
*Note: The CPU/Sound PCB
does not have fuses.

Inside Coin Door

Inside Coin Door

Playfield Power
Interlock Switch

4-Button
Switch Set Playfield Power
Interlock Switch

Service Outlet
(on Power Box),
if equiped.
On/Off Switch
4-Button Switch Set: (Under Cabinet) US / Canada / Japan :
For operational usage, see Sec. 3, Chapter 1, 8 Amp 250v Slo-Blo Fuse

6 Cabinet Bottom
Service Menu Introduction. International : Transformer on
8 Amp 250v Slo-Blo Fuse

)LQG,W,Q)URQW
'U3LQEDOO :
'5
 ),1',7,1)5217'U3LQEDOO6HFWLRQ([SODLQHG
The key technical data from various parts of the manual were extracted and combined into the "Find- It-In-Front:
Dr. Pinball Section." This front section ( Pages '5 - X X]
) will assist the technician in locating important
technical information needed to troubleshoot the Pinball Machine. To enter the SERVICE MENU, read below.

6HUYLFH6ZLWFK;6HW2YHUYLHZ
The four buttons (inside Coin Door) have dual functions depending if you have entered the Service Menu or not.

)XQFWLRQVLQ*DPHRU$WWUDFW0RGH )XQFWLRQVLQWKH6HUYLFH0HQX

*UHHQ 5HG 5HG %ODFN

x Green xx Red Buttons x Black x Green xx Red Buttons x Black

Button Press for Button Button Press to move Button
Press for Volume Adjustment Press for Press to < Left , Right >. Press to
Service – for less (quieter), Service Escape Press to – Decrease Enter
Credit(s). + for more (louder) Menu entry. Back or + Increase values Select
(or Exit). or to change settings. (or ‘OK’).
23(17+(&2,1'22572$&&(667+(6(59,&(6:,7&+;6(7
,QVLGH &RLQ 'RRU
,I &RLO  )ODVK
ODPS 7HVWLQJ
WKH 3OD\ILHOG
*UHHQ 6 6HUYLFH 6ZLWFK ; 6HW 6 3RZHU ,QWHUORFN
6ZLWFK PXVW EH
5HG SXOOHG RXW
5HG
%ODFN

EXAMPLE:
To enter the SERVICE MENU, then enter the SWITCH TEST
MENU via the DIAGNOSTIC MENU, perform the below steps.
Step 1 Press [ SELECT ].
Step 2 With the "DIAG" Icon highlighted, press [ SELECT ].
Step 3 With the "SW" Icon highlighted, press [ SELECT ].
Step 4 With the "TEST" Icon highlighted, press [ SELECT ].
Press any switch. If wired correctly, the information in the display
will match the information in the Switch Matrix (see DR. 4).
Press [ < ] or [ > ] to move left or right through the menus.
Press [ BACK ] to go back a menu, exit or escape at any time.
Continue through the other menus.
More details & information about the SERVICE MENU is covered
in Section 3. The Service Menu is subject to change. Update
this game with the latest code downloaded from out website with
a USB Memory Stick (64MB min., recommendation 128MB or higher). See the inside front cover for directions or
in the Service Menu "Go To Utilities Menu" then "Go To USB Menu" and follow prompts.

)LQG,W,Q)URQW
'5; 'U3LQEDOO
',$*1267,&$,'6
This audible / visual alert display is shown when the 50V / 20V
Power is disabled (by opening the Coin Door). PULL OUT THE
INTERLOCK SWITCH ONLY WHILE IN THE SERVICE MENU
FOR COIL, SWITCH OR PLAY TESTING WHEN THE COIN
DOOR IS REQUIRED TO STAY OPEN FOR SERVICE BUTTON
USE! Pulling out the Power Interlock Switch or pressing the
’escape’ Green [ BACK ] Button will remove the alert display. Initial display presentation is accompanied by 3
audible tones (the bright display warning will go dim after approximately 30 seconds).

This alert display is shown momentarily during Game Mode or

Power-Up to alert the operator of a device malfunction (device or
mechanism doesn’t energize or is energized repeatedly).
OPERATOR ALERT! works by monitoring any switch activated
device that has the potential to trap a ball when disabled (e.g. in
the Shooter Lane, Scoop or Eject Holes, etc.). This alert can
also appear if a switch associated with a device (e.g. Ball Trough, Auto Plunger, etc.) is stuck closed (caused by a
switch jam or stuck ball); the game will activate the device a predetermined number of times and if the problem is
still detected, this device or switch will be noted in Switch Alerts (Page 14) and/or Technician Alerts (Page 18).

Upon entering the SERVICE MENU, if an asterisk " * " is

displayed after the words "SERVICE MENU," the game has
detected possible faulty devices, switches and/or missing
pinballs. Press the either of the Red Buttons (short-cut to the
TECHNICIAN ALERTS MENU) or continue into the SERVICE
MENU (press the Black Button again), select the "DIAG" Icon
and "TECH" Icon for the Technician Alerts information (Page 18).

?????????&38',36:,7&+6(77,1*6?????????
The 8-Pos. Dip Switch [SW1] is on the CPU/Sound Board (between Conn. J3 & J13, lower left corner)
                       
888 8 88
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

99999999 99999 99 999

ON ON ON
USA OFF
Germany OFF
Russia OFF

                       
8 88 8888 8 8
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

9 9999 9999 99 9 999

ON ON ON
Australia OFF
Greece OFF
So. Africa OFF

                       
8 8 8 8
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

9999999 999 9999 9 99 999

ON ON ON
Austria OFF
Italy OFF
Spain OFF

                       
8 8 8 8 88 8
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

9 999999 9 9 999 9 9999

ON ON ON
Belgium OFF
Japan OFF
Sweden OFF

                       
88 88 88 88
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

999999 9 999 99 9999

ON ON ON
Canada 1 OFF
Lithuania OFF
Switzerland OFF

                       
8 88 888 8 88
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

9 9 999 9 999 999 999

ON ON ON
Canada 2 OFF
Middle East OFF
Taiwan OFF

                       
88 8 8 888
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

9 9 999 99 99999 9 9999

ON ON ON
Croatia OFF
Netherlands OFF
UK OFF

                       
8 8 8 8
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos. CPU/SND PCB SETTING: Pos.

99 9999 9999 999 9999999

ON ON ON
Denmark OFF
New Zealand OFF
UPDATE CODE OFF

               
8 8 8 8
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

9 99999 9 9 9999
ON ON
Finland OFF
Norway OFF

               
88 8 8
CPU COUNTRY SETTING: Pos. CPU COUNTRY SETTING: Pos.

9 99999 999 999

ON ON
France OFF
Portugal OFF

Note: Slide Dip Switch 8 to Position ON (with Dip Switches 1-7 in the OFF Position) only to reboot the game with
the latest version BOOT EPROM installed at U9 on the CPU/Sound Board (S.A.M. System only). Currently, this is
also the procedure to update your game with the latest software code update file. For the latest version, visit our
website. If you have questions about updating your game code, call Technical Support for assistance.

)LQG,W,Q)URQW
'U3LQEDOO Z
'5
 SWITCH MATRIX GRID [ #1 – #64 ] {Switch Locations : next page}
CPU/ 01IC-U22A 02IC-U22B 03IC-U22C 04IC-U22D 05IC-U16A 06IC-U16B 07IC-U16C 08IC-U16D 09IC-U36A 10IC-U36B 11IC-U36C 12IC-U36D 13IC-U40A 14IC-U40B 15IC-U40C 16IC-U40D
Sound RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN

Find-It-In-Front:
Dr. Pinball
Board WHT-BRN WHT-RED WHT-ORG WHT-YEL WHT-GRN WHT-BLU WHT-VIO WHT-GRY TAN-BLK TAN-RED TAN-ORG TAN-YEL TAN-GRN TAN-BLU TAN-VIO TAN-WHT
J6-P9 J6-P8 J6-P7 J6-P6 J6-P5 J6-P3 J6-P2 J6-P1 J12-P9 J12-P8 J12-P7 J12-P6 J12-P4 J12-P3 J12-P2 J12-P1
SW. # 1 SW. # 2 SW. # 3 SW. # 4 SW. # 5 SW. # 6 SW. # 7 SW. # 8 SW. # 9 SW. # 10 SW. # 11 SW. # 12 SW. # 13 SW. # 14 SW. # 15 SW. # 16
01 X RIGHT TRANS- LEFT LEFT TOURNA-
Q1 ORBIT GRAIL FER ORBIT ORBIT MENT START
DRIVE JONE (S) JON (E) S JO (N) ES J (O) NES (J) ONES SPINNER IND (Y) IN (D) Y I (N) DY ( I ) NDY EJECT TROUGH (BOTTOM) SPINNER START BUTTON
GRN-BRN «515-7568-08
D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » CABINET CABINET
515-7568-08 515-7568-08 515-7568-08 515-7568-08 180-5010-04 515-7568-08 515-7568-08 515-7568-08 515-7568-08 180-5183-00 180-5183-00 500-6227-03 180-5010-04 180-5174-00 180-5174-00
J1-P1 below playfield below playfield below playfield below playfield below playfield above playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield above playfield In Cabinet In Cabinet
SW. # 17 SW. # 18 SW. # 19 SW. # 20 SW. # 21 SW. # 22 SW. # 23 SW. # 24 SW. # 25 SW. # 26 SW. # 27 SW. # 28 SW. # 29 SW. # 30 SW. # 31 SW. # 32
02 ARK (4-BALL) (4-BALL) (4-BALL) (VUK OPTO) (STACK OPTO) LEFT LEFT RIGHT RIGHT
Q2 AUTO TROUGH TROUGH TROUGH TROUGH TROUGH SHOOTER LEFT RETURN SLING- SLING- RETURN RIGHT LEFT TOP BOTTOM
DRIVE LOAD #4 (L) #3 #2 #1 (R) JAM LANE OUTLANE LANE SHOT SHOT LANE OUTLANE BUMPER BUMPER BUMPER
GRN-RED NOT USED
180-5119-02
« D.O.T.S. » « D.O.T.S. » « D.O.T.S. » TRANS. / REC. TRANS. / REC. « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. »
180-5119-02 180-5119-02 180-5119-02 TX 515-0173-00 TX 515-0173-00 180-5157-00 500-6227-04 500-6227-04 180-5054-00 180-5054-00 500-6227-04 500-6227-04 180-5015-04 180-5015-04 180-5015-04
J1-P3 below playfield below playfield below playfield below playfield RX 515-0174-00 RX 515-0174-00 below playfield below playfield below playfield 2 per Asm. 2 per Asm. below playfield below playfield below playfield below playfield below playfield
SW. # 33 SW. # 34 SW. # 35 SW. # 36 SW. # 37 SW. # 38 SW. # 39 SW. # 40 SW. # 41 SW. # 42 SW. # 43 SW. # 44 SW. # 45 SW. # 46 SW. # 47 SW. # 48
03 RIGHT ARK HIT L. SLING- R. SLING- R. RAMP
Q3 RIGHT NOT ORBIT ENTER ARK GERMAN GERMAN GERMAN GERMAN MAP SHOT SHOT EN-
DRIVE BUMPER USED ( M ) AP M ( A ) P MA ( P ) (TOP) (OPTO) (OPTO) 1 (BOT) 2 3 4 (TOP) EJECT (TOP) (TOP) TRANCE
GRN-ORG «180-5015-04
D.O.T.S. » « D.O.T.S. »
180-0000-00
« D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. »
515-7568-06 515-7568-06 515-7568-06 500-6227-04 500-6775-01 500-6775-01 515-7568-04 515-7568-04 515-7568-04 515-7568-04 180-5186-01 180-5054-00 180-5054-00 180-5087-00
J1-P4 below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield 2 per Asm. 2 per Asm. above playfield
SW. # 49 SW. # 50 SW. # 51 SW. # 52 SW. # 53 SW. # 54 SW. # 55 SW. # 56 SW. # 57 SW. # 58 SW. # 59 SW. # 60 SW. # 61 SW. # 62 SW. # 63 SW. # 64
04 ARK ARK TEMPLE TEMPLE R. ORBIT LEFT CAPTIVE CAPTIVE SWORDS- SWORDS-
Q4 SKILL MOTOR MOTOR MOTOR MOTOR (BOT- GERMAN GERMAN GERMAN ORBIT TEMPLE R. RAMP BALL BALL MAN- MAN-
DRIVE SHOT (UP) (DN) (UP) (DN) TOM) 5 (BOT) 6 7 (TOP) (TOP) STANDUP EXIT (TOP) (BOT) BACK FORWARD
GRN-YEL «180-5087-00
D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. »
180-5119-02 180-5119-02 180-5119-02 180-5119-02 500-6227-04 515-7568-04 515-7568-04 515-7568-04 500-6227-03 515-7581-07 180-5087-00 180-5179-00 180-5178-00 180-5119-02 520-5251-00
J1-P5 above playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield above playfield below playfield below playfield below playfield below playfield
« FOR MORE ABOUT DIODE ON TERMINAL STRIPS « D.O.T.S. », SEE SECTION 5, CHAPTER 2, PAGES 96 – 97. »
BLK
BLK BLU BRN GRY GRN LGN ORG PNK RED TAN VIO WHT YEL
Wire Color Abbreviations used: Black
Black Blue Brown Gray Green Light Grn. Orange Pink Red Tan Violet White Yellow
Dedicated Switches [ #D-1 – #D-32 ] {Dedicated Switch Locations : next page}
CPU/SND IC-U2 IC-U2 IC-U2 IC-U2 IC-U2 IC-U2 IC-U2 IC-U2 IC-U4 IC-U4 IC-U4 IC-U4 IC-U4 IC-U4 IC-U4 IC-U4
PNK-BRN PNK-RED PNK-ORG PNK-YEL PNK-GRN PNK-BLU PNK-VIO PNK-GRY GRY-BRN GRY-RED GRY-ORG GRY-YEL GRY-GRN GRY-BLU GRY-VIO GRY-BLK
Board J2-P2 J2-P3 J2-P4 J2-P6 J2-P7 J2-P8 J2-P9 J2-P10 J3-P1 J3-P2 J3-P4 J3-P5 J3-P6 J3-P7 J3-P8 J3-P9
SW. D-1 SW. D-2 SW. D-3 SW. D-4 SW. D-5 SW. D-6 SW. D-7 SW. D-8 SW. D-9 SW. D-10 SW. D-11 SW. D-12 SW. D-13 SW. D-14 SW. D-15 SW. D-16
GROUND LEFT CENTER RIGHT FOURTH FIFTH L. (EFT) LEFT R. (IGHT) RIGHT U.L. (EFT) U.L. (EFT) U.R. (IGHT) U.R. (IGHT)
(BLK) COIN COIN COIN COIN COIN NOT NOT NOT FLIPPER FLIPPER FLIPPER FLIPPER FLIPPER FLIPPER FLIPPER FLIPPER
J2-P1/11 SLOT SLOT SLOT SLOT SLOT USED USED USED BUTTON E.O.S. BUTTON E.O.S. BUTTON E.O.S. BUTTON E.O.S.
& J3-P10
NOT USED NOT USED NOT USED NOT USED IF USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED
180-5204-00 180-5204-00 180-5204-00 180-5204-00 180-0000-00 180-0000-00 180-5160-01 180-5160-01 180-5160-01 180-5149-00 180-5160-01 180-5149-00 180-5160-01 180-5149-00 180-5160-01 180-5149-00
Coin Door Coin Door Coin Door Coin Door a/b playfield a/b playfield Cabinet Side Cabinet Side Cabinet Side Flipper Asm. Cabinet Side Flipper Asm. Cabinet Side Flipper Asm. Cabinet Side Flipper Asm.
CPU/SND IC-41 LGN IC-41 IC-41 IC-41 IC-41 IC-41 IC-41 IC-41
Board LGN-BRN
J13-P1
-RED LGN-ORG LGN-YEL LGN-BLK LGN-BLU LGN-VIO LGN-GRY
J13-P3 J13-P4 J13-P5 J13-P6 J13-P7 J13-P8 J13-P9 CPU/SOUND BD. SW1 DIP SWITCH (located between Connectors J3/J13)
SW. D-17 SW. D-18 SW. D-19 SW. D-20 SW. D-21 SW. D-22 SW. D-23 SW. D-24 SW. D-25 SW. D-26 SW. D-27 SW. D-28 SW. D-29 SW. D-30 SW. D-31 SW. D-32
GROUND TILT BACK MINUS PLUS SELECT X X X X X X X X
(BLK) PENDULUM SLAM TICKET NOT DIP DIP DIP DIP DIP DIP DIP DIP
X X X X
(GREEN (< / – RED (+ / > RED (BLACK

DR. x
J13-P10 (PLUMB BOB) TILT NOTCH USED BUTTON) BUTTON) BUTTON) BUTTON) (1)2345678 1(2)345678 12(3)45678 123(4)5678 1234(5)678 12345(6)78 123456(7)8 1234567(8)
NOT USED
See Sec. 4, OPTIONAL IF USED NOT USED NOT USED NOT USED NOT USED NOT USED SW. POS. SW. POS. SW. POS. SW. POS. SW. POS. SW. POS. SW. POS. SW. POS.
Chp. 1, Pg. 45 502-5032-00 180-5119-02 180-0000-00 180-5192-04 180-5192-02 180-5192-02 180-5192-00 #1 ON #2 ON #3 ON #4 ON #5 ON #6 ON #7 ON #8 ON
for cab. parts Optional Kit Below P/F a/b playfield Coin Door Coin Door Coin Door Coin Door
 SWITCH MENU: SWITCH, ACTIVE, SINGLE & SERVICE

THERE ARE NO SWITCHES LOCATED ON THE BACK PANEL. 6:,7&+/2&$7,216

^6ZLWFK0DWUL[*ULGSUHYLRXVSDJH`


 
 
  
 

  SW. 50 furthest
SW. 50/51
6
away from playfield  
(3D views
on pages  
 80-81)  
    
   
 
 


 

  SW. 52

6
closest to trough
 (3D view on
 Page 77) 


 UNDER P/F 
  

 UNDER P/F


 
 
 
 

' ' 

 
 
 


' '
)RU PRUH DERXW 'LRGH RQ 7HUPLQDO 6WULSV '276 
VHH 6HFWLRQ  &KDSWHU  3DJHV 
Switch Part Notes: ¥ Yen Coin Switch is 180-5091-00.
= Switches above Playfield. Part Numbers which start with 515- or 500- include the
bracket, target, and/or housing.
= Switches below Playfield.
Sw. D-17 Part Note: The Switch is comprised of a
= OPTO Switch Pairs above. Hanger Bracket (535-5319-00) and Contact Wire
(535-7563-01) located in the Cabinet.

)LQG,W,Q)URQW
'U3LQEDOO \
'5
 [ C. = CENTER ] [ L. = LEFT ] [ R. = RIGHT ]
LAMP MATRIX GRID [ #1 – #80 ] {Lamp Locations : next page}
I/O 01 02 03 04 05 06 07 08
Power IC-U17 IC-U16 IC-U15 IC-U14 IC-U13 IC-U12 IC-U11 IC-U10
Driver 18VDC 18VDC 18VDC 18VDC 18VDC 18VDC 18VDC 18VDC

Find-It-In-Front:
Dr. Pinball
YEL-BRN YEL-RED YEL-ORG YEL-BLK YEL-GRN YEL-BLU YEL-VIO YEL-GRY
Board J13-P9 J13-P8 J13-P7 J13-P6 J13-P5 J13-P4 J13-P3 J13-P1
01 #555 Clear LP. # 1 #555 Clear LP. # 2 #555 Clear LP. # 3 #555 Clear LP. # 4 #555 Clear LP. # 5 #555 Clear LP. # 6 #44 Clear LP. # 7 #44 Clear LP. # 8
Q33
START TOURNAMENT NOT NOT NOT NOT LAST CRUSADE
GROUND BUTTON START BUTTON USED USED USED USED CRUSADE ARROW
RED-BRN
J12-P1 « D.O.T.S. » 165-5002-00 OPTIONAL 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5000-44-HF « D.O.T.S. » 165-5000-44-HF
02 #555 Clear LP. # 9 #555 Clear LP. # 10 #555 Clear LP. # 11 #555 Clear LP. # 12 #555 Clear LP. # 13 #555 Clear LP. # 14 #555 Clear LP. # 15 #555 Clear LP. # 16
Q34
RAIDERS RAIDERS RAIDERS LITE RIGHT RAIDERS SHOOT RAIDERS
GROUND #5 (TOP) #4 #3 MYSTERY SPECIAL #2 AGAIN #1 (BOT)
RED-BLK
J12-P2 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
03 #555 Clear LP. # 17 #555 Clear LP. # 18 #555 Clear LP. # 19 #555 Clear LP. # 20 #555 Clear LP. # 21 #555 Clear LP. # 22 #555 Clear LP. # 23 #555 Clear LP. # 24
Q35
NOT NOT SKILL: INDY SKILL: CAIRO SKILL: SKILL: SUPER
GROUND USED USED IN ( D ) Y I ( N ) DY J0NES SWORDSMAN MYSTERY POPS
RED-ORG
J12-P3 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
04 #555 Clear LP. # 25 #555 Clear LP. # 26 #555 Clear LP. # 27 #555 Clear LP. # 28 #555 Clear LP. # 29 #555 Clear LP. # 30 #555 Clear LP. # 31 #555 Clear LP. # 32
Q36
SKILL: ADVANCE RIGHT
GROUND SCENE ORBIT ARROW ( I ) NDY ( J ) ONES J ( O ) NES JO ( N ) ES JON ( E ) S JONE ( S )
RED-YEL
J12-P4 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
05 #555 Clear LP. # 33 #555 Clear LP. # 34 #555 Clear LP. # 35 #555 Clear LP. # 36 #555 Clear LP. # 37 #555 Clear LP. # 38 #555 Clear LP. # 39 #555 Clear LP. # 40
Q37
EXTRA RIGHT RAMP TEMPLE TEMPLE TEMPLE TEMPLE TEMPLE NOT
GROUND BALL ARROW #5 (TOP) #4 #3 #2 #1 (BOT) USED
RED-GRN
J12-P5 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
06 #555 Clear LP. # 41 #555 Clear LP. # 42 #555 Clear LP. # 43 #555 Clear LP. # 44 #555 Clear LP. # 45 #555 Clear LP. # 46 #555 Clear LP. # 47 #555 Clear LP. # 48
Q38
NOT 2X MARKS CAIRO
GROUND ( M ) AP M(A)P MA ( P ) USED KINGDOM THE SPOT 8-BALL SWORDSMAN
RED-BLU
J12-P6 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
07 #555 Clear LP. # 49 #555 Clear LP. # 50 #555 Clear LP. # 51 #555 Clear LP. # 52 #555 Clear LP. # 53 #555 Clear LP. # 54 #555 Clear LP. # 55 #555 Clear LP. # 56
Q39
CRUSADE CRUSADE CRUSADE CRUSADE CRUSADE RIGHT LEFT LEFT ORBIT
GROUND #5 (TOP) #4 #3 #2 #1 (BOT) SPINNER SPINNER ARROW
RED-VIO
J12-P8 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
08 #555 Clear LP. # 57 #555 Clear LP. # 58 #555 Clear LP. # 59 LED WB WHT LP. # 60 LED WB WHT LP. # 61 LED WB WHT LP. # 62 LED WB WHT LP. # 63 #555 Clear LP. # 64
Q40
NOT NOT NOT LEFT TOP BOTTOM RIGHT TEMPLE
GROUND USED USED USED BUMPER BUMPER BUMPER BUMPER ARROW
RED-GRY
J12-P9 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 112-5024-08 « D.O.T.S. » 112-5024-08 « D.O.T.S. » 112-5024-08 « D.O.T.S. » 112-5024-08 « D.O.T.S. » 165-5002-00
09 #44 Clear LP. # 65 #555 Clear LP. # 66 #555 Clear LP. # 67 #555 Clear LP. # 68 #555 Clear LP. # 69 #555 Clear LP. # 70 #555 Clear LP. # 71 #555 Clear LP. # 72
Q41
TEMPLE KINGDOM KINGDOM KINGDOM KINGDOM LEFT RAIDERS KINGDOM
GROUND OF DOOM #5 (TOP) #4 #3 #2 SPECIAL ARROW #1 (BOT)
RED-WHT
J12-P10 « D.O.T.S. » 165-5000-44-HF « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
10 #44 Amber LP. # 73 #555 Clear LP. # 74 #555 Clear LP. # 75 #555 Clear LP. # 76 #555 Clear LP. # 77 #555 Clear LP. # 78 #555 Clear LP. # 79 #555 Clear LP. # 80
Q42
NOT NOT NOT NOT

DR. z
GROUND MYSTERY USED USED USED IND ( Y ) USED RAIDERS GRAIL
RED
J12-P11 « D.O.T.S. » 165-5053-03-HF « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
« FOR MORE ABOUT DIODE ON TER- BLK
BLK BLU BRN GRY GRN ORG RED VIO WHT YEL
MINAL STRIPS « D.O.T.S. », SEE Wire Color Abbreviations used: Black
Black Blue Brown Gray Green Orange Red Violet White Yellow
SEC. 5, CHP. 2, PAGES 96 – 97. »
 LAMP MENU: ONE, ALL, ROW, COLUMN & ORDERED
THERE ARE NO CONTROLLED LAMPS LOCATED ON THE BACK PANEL. /$03/2&$7,216
^/DPS0DWUL[*ULGSUHYLRXVSDJH`

 



 
  
 
   
 
  
 
  


 

 
   
 
   
   
   
     
  
 



)RU PRUH DERXW 'LRGH RQ 7HUPLQDO 6WULSV '276 

VHH 6HFWLRQ  &KDSWHU  3DJHV 
Lamp Part Notes: #555 Wedge Base (W.B.) Bulb
= Lamps above Playfield. Clear = 165-5002-00. #44 Bayonet Bulb (Heavy
Filament) Clear = 165-5000-44-HF.
= Lamps below Playfield.
See Section 4, Chapter 1, Parts Identification &
Location, Pages 60-62 for more details on bulbs and
corresponding sockets.

)LQG,W,Q)URQW
'U3LQEDOO ^
'5
 &2,/6'(7$,/('&+$577$%/( Note on Q1: Can substitute with
25-1240 (090-5034-ND) Coil
+LJK &XUUHQW &RLOV *URXS  Drive Driver
Transistor Ouput PCB
Power Line
Color
Power Line
Connection
Power Drive Transistor D.T. Control
Voltage Control Line Color Line Connect
Coil GA-Turn
or Bulb Type

#1 TROUGH UP-KICKER Q1 YEL-VIO J10-P9/10 50VDC BRN-BLK J8-P1 26-1200

090-5044-ND
!
23-8000 !
#2
#3
AUTO LAUNCH
ARK MAGNET
Q2

Q3
5 YEL-VIO

VIO-YEL
J10-P9/10 50VDC

J10-P8 50VDC
BRN-RED

BRN-ORG
J8-P3

J8-P4
090-5001-ND
22-6500 !
511-5065-ND

#4 GRAIL SCOOP EJECT Q4

I/O YEL-VIO J10-P9/10 50VDC BRN-YEL J8-P5 24-9400 !
Power 090-5036-ND

#5 BALL STOP (RAMP) Q5 Driver YEL-VIO J10-P9/10 50VDC BRN-GRN J8-P6 32-1800 !
090-5031-00-ND

#6 TEMPLE MOTOR / RELAY Q6 6 BROWN J7-P1 20VDC BRN-BLU J8-P7 Relay Asm
500-6700-00

#7 ARK DIVERTER (RAMP) Q7 YEL-VIO J10-P9/10 50VDC BRN-VIO J8-P8 23-1500 !

090-5062-ND0

#8 SHAKER MOTOR (OPTIONAL) Q8 RED-WHT J17-P7 16VAC BRN-GRY J8-P9 S. Motor Kit
12VDC 502-5027-00
+LJK &XUUHQW &RLOV *URXS  Drive Driver
Transistor Ouput PCB
Power Line
Color
Power Line
Connection
Power Drive Transistor D.T. Control
Voltage Control Line Color Line Connect
Coil GA-Turn
or Bulb Type

#9 LEFT POP BUMPER Q9 YEL-VIO J10-P9/10 50VDC BLU-BRN J9-P1 26-1200 !

090-5044-ND
26-1200 !
#10 TOP POP BUMPER
#11 BOTTOM POP BUMPER
Q10

Q11
5 YEL-VIO

YEL-VIO
J10-P9/10 50VDC

J10-P9/10 50VDC
BLU-RED

BLU-ORG
J9-P2

J9-P4
090-5044-ND
26-1200 !
090-5044-ND

#12 RIGHT POP BUMPER Q12

I/O YEL-VIO J10-P9/10 50VDC BLU-YEL J9-P5 26-1200 !
Power 090-5044-ND

#13 L. SLINGSHOT (TOP) Q13 Driver BROWN J7-P1 20VDC BLU-GRN J9-P6 23-8000 !
090-5001-ND
23-8000 !
#14 R. SLINGSHOT (TOP) Q14 6 BROWN J7-P1 20VDC BLU-BLK J9-P7 090-5001-ND

#15 LEFT FLIPPER (50v RED/YEL) Q15 GRY-YEL~3A 22-1080 !

Fuse~RED-YEL J10-P6/7 50VDC ORG-GRY J9-P8 090-5032-ND

#16 RIGHT FLIPPER (50v RED/YEL) Q16 BLU-YEL~3A 22-1080 !

Fuse~RED-YEL J10-P6/7 50VDC ORG-VIO J9-P9 090-5032-ND
/RZ &XUUHQW &RLOV *URXS  Drive Driver
Transistor Ouput PCB
Power Line
Color
Power Line
Connection
Power Drive Transistor D.T. Control
Voltage Control Line Color Line Connect
Coil GA-Turn
or Bulb Type

#17 LEFT SLINGSHOT Q17 BROWN J7-P1 20VDC VIO-BRN J7-P2 23-8000 !
090-5001-ND
23-8000 !
#18 RIGHT SLINGSHOT
#19 FLASH: TEMPLE OF DOOM
Q18

Q19
5 BROWN

ORANGE
J7-P1

J6-P10
20VDC

20VDC
VIO-RED

VIO-ORG
J7-P3

J7-P4
090-5001-ND
#89 Bulb
165-5000-89
I/O #89 Bulb
#20 FLASH: RAIDERS Q20 ORANGE J6-P10 20VDC VIO-WHT J7-P6
Power 165-5000-89

#21 FLASH: SLINGSHOT (X2) Q21 Driver ORANGE J6-P10 20VDC VIO-GRN J7-P7 #89 Bulb
165-5000-89

#22 FLASH: SANKARA STONE Q22 6 ORANGE J6-P10 20VDC VIO-BLU J7-P8 #89 Bulb
165-5000-89

#23 FLASH: KINGDOM Q23 ORANGE J6-P10 20VDC VIO-BLK J7-P9 #89 Bulb
165-5000-89

#24 OPTIONAL (e.g. COIN METER) Q24 RED J16-P4>8 5VDC VIO-GRY Optional
J7-P10
5VDC
! Coil Note: ! -ND means ’No Diode’. -00B or -00T can be used for coil replacements, but the diode must be removed. Call for more info.
/RZ &XUUHQW &RLOV *URXS  Drive Driver
Transistor Ouput PCB
Power Line
Color
Power Line
Connection
Power Drive Transistor D.T. Control
Voltage Control Line Color Line Connect
Coil GA-Turn
or Bulb Type

#25 FLASH: RAMP (X2) Q25 ORANGE J6-P10 20VDC BLK-BRN J6-P1 #89 Bulb
165-5000-89
!
5
#26 MAP EJECT Q26 BROWN J7-P1 20VDC BLK-RED J6-P2 26-1200
090-5044-ND

#27 ARK MOTOR Q27 BROWN J7-P1 20VDC BLK-ORG J6-P3 Motor
511-5120-00
I/O #89 Bulb
#28 FLASH: BACKPANEL LEFT Q28 ORANGE J6-P10 20VDC BLK-YEL J6-P4
Power 165-5000-89

#29 FLASH: ARK FRONT Q29 Driver ORANGE J6-P10 20VDC BLK-GRN J6-P5 #89 Bulb
165-5000-89

#30 SWORDSMAN MOTOR / RELAY Q30 6 BROWN J7-P1 20VDC BLK-BLU J6-P6 Relay Asm
500-6700-00

#31 FLASH: POP BUMPER (X3) Q31 ORANGE J6-P10 20VDC BLK-VIO J6-P7 #89 Bulb
165-5000-89

#32 FLASH: CRUSADE Q32 ORANGE J6-P10 20VDC BLK-GRY J6-P8 #89 Bulb
165-5000-89
Note: In Test Flash Lamps Menu ("Flash" Icon), only Flashers are tested. This Game: Q19 – Q23, Q25, Q28, Q29, Q31, Q32, Q36 – Q38
$X[ 2XW /(' )ODVK /DPSV Data
Out
Driver
Ouput PCB
Power Line
Color
Power Line
Connection
Power
Voltage
Ground
Color
Ground
Connection
Drive (Data)
Line Color
Drive (Data)
Line Connect
Flash Type
PCB

#36 FLASH: ARK LEDS (X2) B3 5 ORANGE J6-P10 20VDC BLK J16-P9>15 ORG-YEL J2-P5 LED PCB
520-5289-00
I/O LED PCB
#37 FLASH: SWORDSMAN LEDS B4 ORANGE J6-P10 20VDC BLK J16-P9>15 ORG-GRN J2-P6
6
P.D. 520-5289-00

#38 FLASH: SKULL LEDS B5 ORANGE J6-P10 20VDC BLK J16-P9>15 ORG-BLU J2-P7 LED PCB
520-5289-00

)LQG,W,Q)URQW
'5 _ 'U3LQEDOO
 COIL MENU: SINGLE COIL & CYCLING COIL
&2,/ )/$6+/$03/2&$7,216
^&RLOV'HWDLOHG7DEOHSUHYLRXVSDJH`
2UDQJH
 
 2UDQJH
/('
 
 
 /('

    /('

    /('

 
    
  

  





   

 
    
 
  5HG 5HG

 7\SLFDO&RLO:LULQJ 6FKHPDWLF

 
 





 <HOORZ
Coil Q24 is Optional.
THERE IS ONE FLASH LAMP LOCATED ON THE BACK PANEL. If either a Coin Meter, Token
= Coils / Flash Lamps above Playfield.
&RORU = Color of Mini-Mars or Flash Lamp Bulb. = Coils / Flash Lamps below Playfield.
 Dispenser or Knocker (all
optional equipment) is
required, call Technical
= Coils / Flash Lamps on Back Panel. Support for more informa-
)ODVK tion, 1-800-542-5377 or
1-708-345-7700.

)LQG,W,Q)URQW
'U3LQEDOO `
'5
 STANDARD ADJUSTMENT 1
*272$'-8670(1760(1867$1'$5'$'-8670(176>²@
Peform the below steps to review the adjustments. Enter the SERVICE MENU, then enter the STANDARD
ADJUSTMENTS MENU. For adjustment definitions or summary, review Section 3, Chapter 4, GO TO ADJUST-
MENTS MENU. See Section 3, Chapter 5, GO TO INSTALLS MENU (via the UTILITIES MENU), to easily
change all adjustments required depending on the Install Type (Easy, Hard, 5-Ball, Home Play, etc.) desired.
Step 1 Press [ SELECT ]. Press [ BACK ] to exit or escape at any time.
Adjustment Number
Step 2 Press [>]. Go to the "ADJ" Icon. Adjustment Name
Press [ SELECT ]. Adjustment Setting
Step 3 ... "S.P.I." Icon. Press [ SELECT ]. Adjustment Comment

Step 4 STANDARD ADJUSTMENT #1 appears with the Adjustment Name [ REPLAY TYPE ] flashing. With the
Adjustment Name flashing, press [ < ] [ > ] to move between adjustments.
Step 5 To change the Adjustment Setting, press [ SELECT ]. With the Adjustment Setting flashing, press [ < ] [ > ]
repeatedly until the desired setting appears. Press the [ SELECT ] to "install" the change. The Adjustment
Comment (bottom text line) will indicate [ INSTALLED/FACTORY DEFAULT ], if the Factory Default Setting is
selected or [ INSTALLED ] if the change is not the Factory Default Setting.

67$1'$5'$'-8670(176>²@6
1U 67$1'$5' 86$ <285 1U 67$1'$5' 86$ <285
$'-8670(17 1$0( '()$8/7 6(77,1* $'-8670(17 1$0( '()$8/7 6(77,1*
1 REPLAY TYPE AUTO 32 HIGH SCORE #1 150,000,000
2 ‡ REPLAY PERCENTAGE 10% 33 HIGH SCORE #2 120,000,000
3 ‡ REPLAY AWARD CREDIT 34 HIGH SCORE #3 90,000,000
4 ‡ REPLAY LEVELS 1 35 HIGH SCORE #4 60,000,000
5 ‡ AUTO REPLAY START 60,000,000 36 HSTD INITIALS 3 INITIALS
6 ‡ DYNAMIC REPLAY START 120,000,000 37 HSTD RESET COUNT 2000
7 ‡ REPLAY LEVEL #1 60,000,000 38 FREE PLAY NO
8 ‡ REPLAY LEVEL #2 120,000,000 39 LANGUAGE ENGLISH
9 ‡ REPLAY LEVEL #3 180,000,000 40 PLAYER LANGUAGE SELECT YES
10 ‡ REPLAY LEVEL #4 240,000,000 41 CUSTOM MESSAGE ON
11 ‡ REPLAY BOOST YES 42 FLASH LAMP POWER NORMAL
12 SPECIAL LIMIT 1 43 COIL PULSE POWER NORMAL
13 ‡ SPECIAL PERCENTAGE 10% 44 KNOCKER VOLUME NORMAL
14 SPECIAL AWARD CREDIT 45 GAME RESTART YES
15 FREE GAME LIMIT 5 46 BILL VALIDATOR NO
16 EXTRA BALL LIMIT 5 47 MUSIC VOLUME 1
17 ‡ EXTRA BALL PERCENTAGE 25% 48 BALL SAVE TIME 0:05
18 GAME PRICING USA 10 49 TIMED PLUNGER OFF
19 MATCH PERCENTAGE 9% 50 FLIPPER BALL LAUNCH OFF
20 MATCH AWARD CREDIT 51 COINDOOR BALL SAVER NO
21 BALLS PER GAME 3 52 COMPETITION MODE NO
22 TILT WARNINGS 2 53 CONSOLATION BALL YES
23 CREDIT LIMIT 30 54 FAST BOOT YES
24 ALLOW HIGH SCORES YES 55 Q24 OPTION COIN METER
25 HIGH SCORE AWARD CREDIT 56 TICKET DISPENSER NO
26 GRAND CHAMPION AWARDS 1 57 PLAYER COMPETITION YES
27 HIGH SCORE #1 AWARDS 1 58 TEAM SCORES NO
28 HIGH SCORE #2 AWARDS 0 59 LOCATION ID 0
29 HIGH SCORE #3 AWARDS 0 60 GAME ID 0
30 HIGH SCORE #4 AWARDS 0 61 TIME FORMAT 12-HOUR
31 GRAND CHAMPION SCORE 180,000,000 62 COIN INPUT DELAY 30
63 LOST BALL RECOVERY YES
Factory Defaults Settings are subject to change during production (especially Standard Adjustments 2, 4, 5, 13, 16-17, 19, 31-35 & 47).
‡ Not all Standard Adjustments are shown. Depending on the setting (whether Factory Default or if changed by the operator), associated
adjustments do not appear, if not required. Note: If Game Dip Switch other than USA is installed, different Defaults will appear.

)LQG,W,Q)URQW
'5 XW 'U3LQEDOO
 FEATURE ADJUSTMENT 1
*272$'-8670(1760(18)($785($'-8670(176>²@
Peform the below steps to review the adjustments. Enter the SERVICE MENU, then enter the FEATURE
ADJUSTMENTS MENU. For adjustment definitions or summary, review Section 3, Chapter 4, GO TO ADJUST-
MENTS MENU. See Section 3, Chapter 5, GO TO INSTALLS MENU (via the UTILITIES MENU), to easily
change all adjustments required depending on the Install Type (Easy, Hard, 5-Ball, Home Play, etc.) desired.
Step 1 Press [ SELECT ]. Press [ BACK ] to exit or escape at any time.
Adjustment Number
Step 2 Press [>]. Go to the "ADJ" Icon. Adjustment Name
Press [ SELECT ]. Adjustment Setting
Step 3 Press [>]. Go to the "INDY" Icon. Adjustment Comment
Press [ SELECT ].
Step 4 FEATURE ADJUSTMENT #1 appears with the Adjustment Name [ RAIDERS DIFFICULTY ] flashing.
With the Adjustment Name flashing, press [ < ] [ >] to move between adjustments.
Step 5 To change the Adjustment Setting, press [ SELECT ]. With the Adjustment Setting flashing, press [ < ] [ > ]
repeatedly until the desired setting appears. Press the [ SELECT ] to "install" the change. The Adjustment
Comment (bottom text line) will indicate [ INSTALLED/FACTORY DEFAULT ], if the Factory Default Setting is
selected or [ INSTALLED ] if the change is not the Factory Default Setting.
)($785($'-8670(176>²@6VSDFHVIRUXSGDWHVLIDQ\VHHGRWGLVSOD\6
1U )($785( 86$ <285 1U )($785( 86$ <285
$'-8670(17 1$0( '()$8/7 6(77,1* $'-8670(17 1$0( '()$8/7 6(77,1*
1
RAIDERS MEDIUM
DIFFICULTY
2
TEMPLE MEDIUM
DIFFICULTY
3
CRUSADE MEDIUM
DIFFICULTY
4
SKULL MEDIUM
DIFFICULTY
5
INDY JONES MEDIUM
DIFFICULTY
6
MAP SPELLOUT EXTRA
DIFFICULTY EASY

7
SWORDSMAN EXTRA
DIFFICULTY EASY

8
SWORDSMAN 3
EXTRA BALL AT
9
LIGHT MYSTERY MEDIUM
DIFFICULTY
10
X MARKS THE SPOT EXTRA
DIFFICULTY EASY

11
EXTRA BALL YES
MEMORY
12
DISABLE NO
TEMPLE OF DOOM MOTOR
13
DISABLE NO
CAIRO SWORDSMAN MOTOR
14
DISABLE NO
ARK MOTOR
15
DISABLE NO
ARK DIVERTER
16
SHAKER MOTOR MODERATE
(OPTIONAL) USE

Factory Defaults Settings are subject to change during production

Note: If Game Dip Switch other than USA is installed, different Defaults will appear.

)LQG,W,Q)URQW
'U3LQEDOO XX
'5
 CHOOSE EARNINGS or STANDARD AUDITS
*272$8',760(18($51,1*6$8',76>²@67$1'$5'$8',76>²@
Perform the below steps to review the audits. Enter the SERVICE MENU, then enter the EARNINGS AUDITS or
STANDARD AUDITS MENUS. For audit definitions or summary, review Section 3, Chapter 3, GO TO AUDITS
MENU. Try the "DUMP AUDITS TO USB" Feature to create a text file of your audits. Don’t forget to set the DATE
& TIME in the UTILITIES MENU. See Section 3, Chapter 5, GO TO UTILITIES MENU, for more information.

Audit Number
Step 1 Press [ SELECT ]. Audit Name
Press [ BACK ] to exit for Audit Result
escape at any time.
Step 2 Press [ > ]. Go to the
"AUD" Icon.
Press [ SELECT ]. ($51,1*6$8',76>²@6
Step 3 Press [ > ]. Go to the 1U ($51,1*6 $8',7 <285 1U ($51,1*6 $8',7 <285
"EARN" or "S.P.I." Icon. 1$0( 5(68/7 1$0( 5(68/7
TOTAL COINS THROUGH
Press [ SELECT ]. 1 PAID CREDITS 8 FOURTH SLOT
Step 4 Press [ < ] [ > ] to FREE GAME COINS THROUGH
2 PERCENTAGE 9 FIFTH SLOT
move between audits. AVERAGE TOTAL
3 BALL TIME 10 COINS
AVERAGE TOTAL
4 GAME TIME 11 EARNINGS
COINS THROUGH METER
5 LEFT SLOT 12 CLICKS
COINS THROUGH SOFTWARE
6 RIGHT SLOT 13 METER
COINS THROUGH
7 CENTER SLOT

67$1'$5'$8',76>²@6
1U 67$1'$5' $8',7 <285 1U 67$1'$5' $8',7 <285 1U 67$1'$5' $8',7 <285
1$0( 5(68/7 1$0( 5(68/7 1$0( 5(68/7
TOTAL 8.0M – 9.99M RIGHT
1 BALLS PLAYED 21 SCORES 41 DRAINS
TOTAL 10.0M – 12.49M TILTS
2 EXTRA BALLS 22 SCORES 42
EXTRA BALL 12.5M – 14.99M TOTAL
3 PERCENTAGE 23 SCORES 43 BALLS SAVED
REPLAY 1 15.0M – 17.49M LEFT FLIPPER
4 AWARDS 24 SCORES 44 USED
REPLAY 2 17.5M – 19.99M RIGHT FLIPPER
5 AWARDS 25 SCORES 45 USED
REPLAY 3 20.0M – 24.99M 0 – 1 MINUTE
6 AWARDS 26 SCORES 46 GAMES
REPLAY 4 25.0M – 29.99M 1 – 1.5 MINUTE
7 AWARDS 27 SCORES 47 GAMES
TOTAL 30.0M – 39.99M 1.5 – 2 MINUTE
8 REPLAYS 28 SCORES 48 GAMES
REPLAY 40.0M – 49.99M 2 – 2.5 MINUTE
9 PERCENTAGE 29 SCORES 49 GAMES
TOTAL 50.0M – 74.99M 2.5 – 3 MINUTE
10 SPECIALS 30 SCORES 50 GAMES
SPECIAL 75.0M – 99.99M 3 – 3.5 MINUTE
11 PERCENTAGE 31 SCORES 51 GAMES
TOTAL 100.0M – 149.99M 3.5 – 4 MINUTE
12 MATCHES 32 SCORES 52 GAMES
HIGH SCORE 150.0M+ 4 – 5 MINUTE
13 AWARDS 33 SCORES 53 GAMES
HIGH SCORE AVERAGE 5 – 6 MINUTE
14 PERCENT 34 SCORES 54 GAMES
TOTAL SERVICE 6 – 8 MINUTE
15 FREE PLAYS 35 CREDITS 55 GAMES
TOTAL BALL SEARCH 8 – 10 MINUTE
16 PLAYS 36 STARTED 56 GAMES
0.0M – 1.99M LOST BALL 10 – 15 MINUTE
17 SCORES 37 FEEDS 57 GAMES
2.0M – 3.99M LOST BALL 15+ MINUTE
18 SCORES 38 GAME STARTS 58 GAMES
4.0M – 5.99M LEFT RECENT
19 SCORES 39 DRAINS 59 REPLAY PERCENT
6.0M – 7.99M CENTER Note: Audits are subject to change (with or without notice).
20 SCORES 40 DRAINS

)LQG,W,Q)URQW
'5 XY 'U3LQEDOO
 FEATURE AUDIT 1
*272$8',760(18)($785($8',76>²@
Perform the below steps to review the audits. Enter the SERVICE MENU, then enter the FEATURE AUDITS
MENU. Try the "DUMP AUDITS TO USB" Feature to create a text file of your audits. Don’t forget to set the DATE
& TIME in the UTILITIES MENU. See Section 3, Chapter 5, GO TO UTILITIES MENU, for more information.
Step 1 Press [ SELECT ]. Press [ BACK ] to exit or escape at any time.
Step 2 Press [ > ]. Go to the "AUD" Icon. Audit Number
Press [ SELECT ]. Audit Name
Audit Result
Step 3 Press [ > ]. Go to the "INDY" Icon. Press [ SELECT ].
Step 4 Press [ < ] [ > ] to move between audits. % = AUDIT RESULT DIVIDED BY STANDARD AUDIT 16 (TOTAL PLAYS).

)($785($8',76>²@6IRUXSGDWHVLIDQ\VHHGRWGLVSOD\6
1U )($785( $8',7 <285 1U )($785( $8',7 <285 1U )($785( $8',7 <285 1U )($785( $8',7 <285
1$0( 5(68/7 1$0( 5(68/7 1$0( 5(68/7 1$0( 5(68/7
LEFT 2ND INDY SCOR- RAIDERS MOVIE 4 CRUSADE MOVIE 5
1 OUTLANE 28 ING START 55 STARTED 82 COMPLETED
RIGHT 2ND INDY SCOR- RAIDERS MOVIE 4 SKILL SHOT
2 OUTLANE 29 ING AWARDS 56 JACKPOTS 83 STARTS
LEFT 2ND INDY SCOR- RAIDERS MOVIE 4 SKILL SHOT
3 RETURN LANE 30 ING COMPLETED 57 SUPER JACKPOTS 84 INDY JONES
RIGHT 3+ INDY SCORING RAIDERS MOVIE 4 SKILL SHOT CAI-
4 RETURN LANE 31 STARTS 58 COMPLETED 85 RO SWORDSMAN
INDY 3+ INDY SCORING RAIDERS MOVIE 5 SKILL SHOT
5 TARGETS 32 AWARDS 59 STARTED 86 LIGHT MYSTERY
JONES 3+ INDY SCORING RAIDERS MOVIE 5 SKILL SHOT
6 TARGETS 33 COMPLETED 60 JACKPOTS 87 SUPER POPS
INDY JONES JONES SCORING RAIDERS MOVIE 5 SKILL SHOT
7 TARGETS 34 STARTED 61 SUPER JACKPOTS 88 NEXT SCENE
GRAIL JONES SCORING RAIDERS MOVIE 5 MAP LETTERS
8 EJECT 35 AWARDS 62 COMPLETED 89 COMPLETED
GRAIL EJECT JONES SCORING TEMPLE MOVIE 1 MAP LETTERS
9 VIA POPS 36 COMPLETED 63 STARTED 90 PROGRESSED
LEFT 2ND JONES SCOR- TEMPLE MOVIE 1 MAP LETTERS
10 ORBIT 37 ING START 64 COMPLETED 91 ALREADY LIT
LEFT 2ND JONES SCOR- TEMPLE MOVIE 2 MYSTERY
11 SPINNER 38 ING AWARDS 65 STARTED 92 COLLECTED
POP BUMPER 2ND JONES SCOR- TEMPLE MOVIE 2 MYSTERY-
12 HITS 39 ING COMPLETED 66 COMPLETED 93 BIG POINTS
TEMPLE 3+ JONES SCOR- TEMPLE MOVIE 3 MYSTERY-
13 CAPTIVE BALL 40 ING STARTS 67 STARTED 94 LITTLE POINTS
TEMPLE 3+ JONES SCOR- TEMPLE MOVIE 3 MYSTERY-
14 TROUGH 41 ING AWARDS 68 COMPLETED 95 LIGHT SPECIAL
CAIRO 3+ JONES SCOR- TEMPLE MOVIE 4 MYSTERY-
15 CAPTIVE BALL 42 ING COMPLETED 69 STARTED 96 LIGHT EX. BALL
MAP RAIDERS MOVIE 1 TEMPLE MOVIE 4 MYSTERY-
16 EJECT 43 STARTED 70 COMPLETED 97 HURRYUP 1
MAP LEFT RAIDERS MOVIE 1 TEMPLE MOVIE 5 MYSTERY-
17 SLINGSHOT 44 JACKPOTS 71 STARTED 98 HURRYUP 2
MAP RIGHT RAIDERS MOVIE 1 TEMPLE MOVIE 5 MYSTERY-
18 SLINGSHOT 45 SUPER JACKPOTS 72 COMPLETED 99 HURRYUP 3
MAP RAIDERS MOVIE 1 CRUSADE MOVIE 1 MYSTERY-
19 TARGETS 46 COMPLETED 73 STARTED 100 HURRYUP 4
GERMAN RAIDERS MOVIE 2 CRUSADE MOVIE 1 MYSTERY-
20 TARGETS 47 STARTED 74 COMPLETED 101 SWORDSMAN
# TIMES RAIDERS MOVIE 2 CRUSADE MOVIE 2 EXTRA
21 ARK HIT 48 JACKPOTS 75 STARTED 102 BALLS
RIGHT RAIDERS MOVIE 2 CRUSADE MOVIE 2 CAIRO SWORDS-
22 RAMP 49 SUPER JACKPOTS 76 COMPLETED 103 MAN STARTED
RIGHT RAIDERS MOVIE 2 CRUSADE MOVIE 3 CAIRO SWORDS-
23 ORBIT 50 COMPLETED 77 STARTED 104 MAN COMPLETED
RIGHT RAIDERS MOVIE 3 CRUSADE MOVIE 3 X MARKS THE
24 SPINNER 51 STARTED 78 COMPLETED 105 SPOT STARTED
INDY SCORING RAIDERS MOVIE 3 CRUSADE MOVIE 4 X MARKS THE
25 STARTED 52 JACKPOTS 79 STARTED 106 SPOT AUGMENTED
INDY SCORING RAIDERS MOVIE 3 CRUSADE MOVIE 4 X MARKS THE
26 AWARDS 53 SUPER JACKPOTS 80 COMPLETED 107 SPOT MAXED
INDY SCORING RAIDERS MOVIE 3 CRUSADE MOVIE 5
27 COMPLETED 54 COMPLETED 81 STARTED +
Note: Audits are subject to change (with or without notice).

)LQG,W,Q)URQW
'U3LQEDOO XZ
'5
 'RPHVWLF3LQEDOO 5HGHPSWLRQ'LVWULEXWRUV0DS



 
   
 

 


  
 

 

 

 
 



 

  


?????????,QWHUQDWLRQDO'LVWULEXWRUV0DS?????????

For Parts & Service, call your nearest Distributor. View the above maps & the directories on the next page to locate your closest Distributor in your state, province, or
country. Distributors and phone numbers are subject to change. Call Stern® Pinball, Inc. (Parts Sales & Technical Support) with any questions or if your Distributor
cannot help you: 1-800-542-5377 (in USA or Canada) or 1-708-786-5466. Visit us at www.SternPinball.com for current Distributor Information & other pinball needs.

)LQG,W,Q)URQW
'5 X[ 'U3LQEDOO
 'RPHVWLF3LQEDOO 5HGHPSWLRQ'LVWULEXWRUV'LUHFWRU\
ALABAMA ILLINOIS MINNESOTA NEW YORK SOUTH CAROLINA CANADA
Birmingham Vending American Vending Sales Lieberman Companies Betson Enterprises Parts & Service Only:
Birmingham (1) Elk Grove Village (1) Minneapolis (1) New Hyde Park (1) Green Coin ONTARIO
205-324-7526 847-439-9400 800-879-0321or 516-354-4647 Mrytle Beach Starburst Coin Mach.
Franco Distributing Betson Midwest 952-887-5299 Syracuse (2) 843-626-1900 Toronto
Montgomery (2) Bensenville (2) Moss Distributing 315-437-2400 TENNESSEE 416-251-2122
334-834-3455 630-238-9400 Bloomington (2) Parts & Service Only: Brady Distributing BRITISH
ARIZONA INDIANA 952-881-8770 Bay Coin Memphis COLUMBIA
Betson West Shaffer Distributing MISSOURI Richmond Hill (3) 901-345-7811 Parts & Service Only:
Phoenix Indianapolis Greater America Dist. 718-291-5757 Parts & Service Only: Can. Coin Machine
602-442-6630 317-899-2530 Kansas City (1) NORTH CAROLINA Green G.A.M.E.S. Burnaby (1)
Mountain Coin IOWA 816-531-4300 Brady Distributing Memphis 604-420-4008
Phoenix Greater America Dist. Moss Distributing Charlotte (1) 901-353-1000 Parts & Service Only:
602-269-7596 Johnston Kansas City (1) 704-357-6284 TEXAS Pacific Vending
CALIFORNIA 515-278-4455 816-231-6600 Parts & Service Only: Vancouver (2)
Amusement Distributors
Betson West Moss Distributing Shaffer Distributing Operators Distributing San Antonio (3) 604-324-2164
Buena Park (1) Des Moines St. Louis (2) Archdale (2) 210-225-3844
714-228-7500 515-266-6422 314-645-3393 336-884-5714 Betson Texas
So. San Francisco (2) KANSAS NEBRASKA OHIO Dallas (1)
650-952-4220 United Dist., Inc. Central Distributing Shaffer Distributing 214-638-4900
C.A. Robinson Wichita Omaha Cincinnati (3) Discount Arcade Dist.
Los Angeles (3) 316-263-6181 402-493-5600 800-282-0194 Forest Hill (1)
323-735-3001 LOUISIANA Greater America Dist. Columbus (1) 800-890-2393 or
COLORADO Omaha 614-421-6800 682-587-8580
AMA Distributors, Inc. 402-553-2812
Game Exchange of CO Metairie (1) Valley View (2) H.A. Franz, & Co.
Denver 504-835-3232 NEVADA 216-447-1749 Houston (2)
303-288-6500 (sales) Mountain Coin OKLAHOMA 713-523-7366
New Orleans Novelty
303-288-4300 (main) New Orleans (2) Las Vegas (1) San Antonio (3)
702-798-0900
Galaxy Distributing 210-226-6322
Mountain Coin 504-888-3500 Tulsa
Denver MARYLAND Reno Game Sales 918-835-1166 Master Sales
303-427-2133 Reno (2) Corsicana (4)
Betson Enterprises 775-829-2080
OREGON 903-874-4740
CONNECTICUT Baltimore Mountain Coin
TDM Distributing 410-646-4100 NEW JERSEY Portland UTAH
Williamantic Parts & Service Only: Betson Enterprises 503-234-5491 Mountain Coin
860-423-1403 Weiner Distributing Carlstadt (1) Salt Lake City
201-438-1300
Specialty Coin Products 801-262-5494
FLORIDA Baltimore Portland
Birmingham Vending 410-525-2600 Jack Guarnieri 800-987-4946 or Struve Distributing
Orlando (1) MASSACHUSETTS Service Co., Inc. 503-786-9200 Salt Lake City Note: For states and
407-425-1505 (Pinballsales.com) 801-328-1636 Canadian Provinces
Betson New England Lakewood (2) PENNSYLVANIA which do not have
Brady Distributing Canton (1) Betson Enterprises WASHINGTON Distributors, call the
800-473-5225 or
Miami [Miramar] (2) 800-274-6326 or 732-364-9900 King Of Prussia (1) Mountain Coin neighboring state or
954-874-1100 781-821-8533 610-265-1155 Auburn (Seattle) province with the city
Orlando (1) NEW MEXICO 253-736-6073 closest to you (indicated
Gekay Sales Mountain Coin Pittsburgh (2)
407-872-1666 Ludlow (2) 412-331-8703 WISCONSIN with a white dot). States
Albuquerque or Provinces with more
GEORGIA 413-583-7700
505-345-7706 Superior Amusements Pioneer Sales & Svc. than 1 city containing a
Greater Southern Dist. MICHIGAN Wilkes-Barre (3) Menomonee Falls (2) distributor are numbered.
Smyrna Shaffer Distributing 570-824-9994 262-781-1420 View the map on the
770-803-3040 Livonia (2) Lieberman Companies previous page.
734-432-1040 Menomonee Falls (2)
800-236-1880 or Note: From inside the
262-703-4168 US, use prefix 1-.

Note: Distributors are subject to change. Visit us at www.SternPinball.com for current Distributor Information.

????????,QWHUQDWLRQDO'LVWULEXWRUV'LUHFWRU\????????
AUSTRALIA FRANCE ITALY (RSM) NORWAY SOUTH AFRICA UNITED ARAB
Amusement Mach. Dist. Avranches Automatic Tecnoplay S.A. Parts for Pinballs K & W Amusements EMIRATES
Alexandria Saint Quentin San Marino Sandefjord Port Elizabeth Warehouse of Games
+61 (2) 9700 9600 sur le Homme +39 549 901 508 +47 9242 1402 +27 41 484 3344 or Dubai
AUSTRIA +33 2 3389 6162 JAPAN Vendcomatic AS +27 41 484 2940 +971 4 883 5880
R. Rupp SFA HIC, Inc. Skedsmokorset SPAIN UNITED KINGDOM
Leibnitz Paris Chiba-Ken +47468 31000 Comercial Cocamatic Electrocoin
+43 3 4528 6105 +33 1 5326 8080 +04 7176 4040 PORTUGAL Coslada (Madrid) London, England
BELGIUM GERMANY LITHUANIA Jacinto & Martins, S.A. +34 91 671 6980 +44 208 965 2055
NAMUSCO ADP Gauselmann GmbH Proeksas, Ltd. Belas SWEDEN Parts & Service Only:
Bruxelles Espelkamp Vilnius +35 1214 3256 24 or Bjuvia Fritid AB Electrocoin Aftersales
+32 2 414 4596 +49 5741 27 32 85 +370 52 727629 +35 1214 3256 38 Bjuv Cardiff, S. Glamorgan
CZECH REPUBLIC Crown Technologies GmbH THE NETHERLANDS RUSSIA +46 4238 6900 +44 292 045 0345
Rellingen Kalmancor Enterprise Ltd SWITZERLAND
Kimex Group GAMECASTLE INT’L. Moscow
Paskov +49 4101 30 24 85 Rijen Novomat Handels AG
+420 596 731 301-4 Merkur Gaming GmbH +31 65 241 8101 +95 124 5601 or Lausen
Luebbecke +95 124 5613 +41 61 921 68 71
DENMARK GAME-XL B.V. O.D.A. Game Machines
+49 5772 4 94 22 Kruisstraat (Rosmalen) TAIWAN, R.O.C.
JK Automater A/S Moscow
Thisted HOLLAND +31 73 522 2264 SEC
+95 219 2949 or
+45 97 92 0925 See The Netherlands NEW ZEALAND +95 219 8917 Taichung
ENGLAND Coin Cascade Ltd. SOUTH AMERICA +886 4 229 10646
HUNGARY Christchurch TURKEY
see UNITED KINGDOM See Betson Enterprises
Bürü Kft +643 338 1411 New Jersey, USA Balo Note: From inside the
Budapest Parts & Service Only: Marmaris US, use prefix 011-.
FINLAND +36 9 435 2547
Pelika net Oy Amco Machine Supplies +0 252 413 83 35
Auckland From inside country
Vantaa listed, dial (0) first.
+358 9 290 450 +64 9846 7606

)LQG,W,Q)URQW
'U3LQEDOO X\
'5
 32:(55(48,5(0(176
This game must be connected to a properly grounded outlet to reduce shock hazard & insure pro-
per game operation. See Sec. 5, Schematics & Troubleshooting, Chp. 3, Cabinet Wiring (Transformer
Power Wiring), for transformer connections required for Normal, High, and Low Line conditions.
Normal Line: 110v AC - 125v AC @ 60Hz
Domestic AVG OPERATION MAX OPERATION
use an 8AMP 250v Slo-Blo Fuse. CURRENT: 2.8AMP CURRENT: 8AMP
WATTAGE: 329w WATTAGE: 940w
High Line: 218v AC - 240v AC @ 50Hz
Export AVG OPERATION MAX OPERATION
use 2x 5AMP 250v Slo-Blo Fuses. England
CURRENT: 1.8AMP CURRENT: 5AMP | 8AMP* & Hong
(*England & Hong Kong use an 8
AMP 250v S/B Fuse.)
WATTAGE: 412w |
WATTAGE: 1145w 1832w* an
Kong use
8A Fuse.

Low Line: 95v AC - 108v AC @ 50Hz / 60Hz

Export Japan Only AVG OPERATION MAX OPERATION
use an 8AMP 250v Slo-Blo Fuse. CURRENT: 2.6AMP CURRENT: 8AMP
WATTAGE: 264w WATTAGE: 812w

???????*$0(',0(16,216???????75$163257$7,21
The overall Front / Back
Height dimensions include the
added 1" with the Leg Lev- + 4G"
elers turned all the way in.

* P L E A S E N O T E:
The TO URNMENT PLAY 75"
Sign or betaBRITE Color To reduce the possibility of damage,

Back Height *
Dot Display will add up to
/
4 " to the overall Back
27" observe ALL precautions whenever
Height for a total of 79 ". 0 28"
transporting the game.
Back Width Read & follow Section 1,
Ceiling Height Requirement: Chapter 1, Pinball Game Set-Up
An additional 1 " is  Procedures, and
required for the rotation ( ) How to Secure the
of the Backbox to the upright Backbox for Transporting.
position. Remove the legs and secure the
The complete Back Height game within the transporting vehicle.
required with Sign or Dot
Display and rotation: 81" SAVE AND RETAIN ALL
PRINTED INFORMATION
23" INSIDE THE CABINET !

47"

51" Height 56" Width 31"

22" Depth 31"
Approx. Unboxed Weight:
260lbs. (+/- 10)
Boxed Weight:
Wt. 290lbs. (+/- 15)
Front Height

The Cabinet is designed to give

the recommended 6.5° pitch to
the Playfield when all four (4)
55" Legs are installed with the Leg
Levelers turned all the way in.
With the Leg Levelers turned all
the way out (not recommended),
36"

an additional 1 " should be
added to the respective Back or
Leg Length = Front Height dimensions.
30H"
+1"
)LQG,W,Q)URQW
'5 X] 'U3LQEDOO
6 HFW LRQ V  ²  * H QHU D O  7DE O H  R I  & R QW H QW V
,QGLDQD-RQHV• 3LQEDOO
+RZ7R8SGDWH<RXU*DPH&RGHIRU6$06\VWHP0DFKLQHV ,QVLGH)URQW
)LQG,W,Q)URQW'U3LQEDOO  '5X²X]
X For Proper Operation of this Pinball Game, (4) Pinballs must be installed in the Ball Trough! //
Backbox Fuses, Cabinet Fuses, Playfield Fuses and Cabinet Switches ............................................................................DR. X
X Find-It-In-Front: Dr. Pinball Section Explained ......................................................................................................................DR. Y
Z Service Switch X4 Set Overview Z Functions in Game or Attract Mode Z Functions in the Service Menu
X Diagnostic Aids ........................................................................................................................................................................DR. Z
X CPU Dip Switch Settings .........................................................................................................................................................DR. Z
X Switch Matrix Grid (#1 – #64) and Dedicated Switches (D-1 – D-32)....................................................................................DR. [
X Switch Locations......................................................................................................................................................................DR. \
X Lamp Matrix Grid (#1 – #80) ....................................................................................................................................................DR. ]
X Lamp Locations........................................................................................................................................................................DR. ^
X Coils Detailed Chart Table .......................................................................................................................................................DR. _
X Coil & Flash Lamp Locations ..................................................................................................................................................DR. `
X Go To Adjustments Menu: Standard Adjustments [ #1 – #63 ].......................................................................................... DR. XW
X Go To Adjustments Menu: Feature Adjustments [ #1 – #16 ] ............................................................................................ DR. XX
X Go To Audits Menu: Earnings Audits [ #1 – #13 ] / Standard Audits [ #1 – #59 ] ............................................................. DR. XY
X Go To Audits Menu: Feature Audits [ #1 – #107+ ] ............................................................................................................. DR. XZ
X Domestic Pinball & Redemption Distributors Map // International Distributors Map....................................................... DR. X[
X Domestic Pinball & Redemption Distributors Directory // International Distributors Directory...................................... DR. X\
X Power Requirements // Game Dimensions // Transportation ............................................................................................. DR. X]
6HFWLRQV*HQHUDO7DEOHRI&RQWHQWV L²LL
6HFWLRQ&KDSWHURI$IWHU6HW8S ²
X Pinball Game Set-Up Procedures ....................................................................................................................................................1
Z Backbox (backglass removed): Z Playfield (glass removed): Z With the Coin Door Open:
X Pinball Game Set-Up Future Reference....................................................................................................................................... 1-3
X How to Secure the Backbox ... // Leg Leveler Adjustment // Easy Access Service System - 2 Positions.................................4
6HFWLRQ&KDSWHURI*DPH2SHUDWLRQ )HDWXUHV²
X Start of Game Features.....................................................................................................................................................................5
Z Starting a Normal Game Z Starting Team Play (Doubles!) Z Starting Tournament Play
X During Game Features......................................................................................................................................................................5
Z Feature Mode & Combination Shots Z Multiball Z Replay Feature
X End of Game Features ......................................................................................................................................................................5
Z Game Endings Z Match Feature Z Entering Initials/Name
X Auto Percentaging ............................................................................................................................................................................6
X Instruction Card.................................................................................................................................................................................6
6HFWLRQ&KDSWHURI6HUYLFH0HQX6\VWHP  ²
X Table of Contents for Section 3........................................................................................................................................................7
6HFWLRQ&KDSWHURI*R7R'LDJQRVWLFV0HQX ²
6HFWLRQ&KDSWHURI*R7R$XGLWV0HQX ²
6HFWLRQ&KDSWHURI*R7R$GMXVWPHQWV0HQX ²
6HFWLRQ&KDSWHURI*R7R8WLOLWLHV0HQX ²
6HFWLRQ&KDSWHURI*R7R7RXUQDPHQW0HQX²
6HFWLRQ&KDSWHURI3DUWV,GHQWLILFDWLRQ /RFDWLRQ 7KH3LQN3DJHV ²
X Table of Contents for Section 4, Chapter 1 ...................................................................................................................................41
6HFWLRQ&KDSWHURI'UDZLQJVIRU0DMRU$VP 5DPSV 7KH%OXH3DJHV ² 
X Table of Contents for Section 4, Chapter 2 ...................................................................................................................................63
6HFWLRQ&KDSWHURI%DFNER[:LULQJ²
X Table of Contents for Section 5......................................................................................................................................................95
6HFWLRQ&KDSWHURI3OD\ILHOG:LULQJ ²
6HFWLRQ&KDSWHURI&DELQHWDQG&RLQ'RRU:LULQJ ²
6HFWLRQ&KDSWHURI3ULQWHG&LUFXLW%RDUGV 3&%V ²
$SSHQGL[HV$-7DEOHRI&RQWHQWV (QGRI0DQXDO
X Stern Pinball, Inc. Limited Warranty // Cautions, Warnings & Notices ........................................................................... last page

6HUYLFH*DPH0DQXDO
Y 3DJHL
 6HUYLFH*DPH0DQXDO
3DJHLL Y
6HFWLRQ  & KD SW H U   R I  
$IWHU6 H W 8S       _    `

6HF$IWHU6HW8S
 '€@^^}%‚€XZ?}%<>‚?€
'%ƒ€„„ „†% > \   ‡
‡==     =   
0D FKLQH6HW 8S 3U R FHGX UHV
      
    !##$%  
  '*

        

          

         
    
    
        
            
      

%DF NER[ EDF NJODVV UH PRYHG 

           $ 
          
      %'<=> =?' 
   '> @      
 X Z \  ^ 
   % _     
  !#$%'' 
'* ;<   *= '>  
'' '$

3OD\I LHOG JODV VUHPRYH G 

 $           _  _ 
    +0;<;==+>?0<>@K+X;?K>Z
>       =      
   =        
$$&';&'=?
      @     
   ***   '\ \  ***
$        @ _`>    \^_`^{~ 
{\;?

 {                 |         
       
}_          @J*  ''J
 '* @J '*
 ^      `€ { €~  ^^    >
   \$$`_€‚{~{\;?> ^^      KQXY
J*J;<         ~ ^^     
~ƒ{ „ @ ^ 
=†; ;;$$$‡'=†ˆ‡‡‰Š&$$‡ˆŠŠ&‹†==‡‰=ŠŒ&'&$$&†&‰
; ;;$†‡ $‰Š;=ˆ'=†;$Ž$&' ‹‡Š'&$$ =Š=&‡'
          <    |
       ~   
:LWKWKH&RLQ'RRU2SH Q
         % '< !<^ X     <
 _<K?K<;>K?`X0><'J' @Yq \?YY>
?YZ<' < J ;J
  ~ ‹~_‘{€_€€’_{~ % '< {<K?K;<|?X0>?
X0>% '< <K?K>?;==X0>[<  \<q\}
`    >^\; ;q< 

 6HFWLRQ&KDSWHU
$IWHU6HW8S 3DJH
 Pinball Game Set-Up Future Reference
Sec. 1: After Set-Up

Section 1, Chapter 1
Page 2 After Set-Up
 Pinball Game Set-Up Future Reference

Sec. 1: After Set-Up

Section 1, Chapter 1
After Set-Up Page 3
 +RZWR6HFXUHWKH%DFNER[IRU7UDQVSRUWLQJ
For more Backbox details & part numbers, see Section 4,
6HF$IWHU6HW8S

Chapter 1, Parts Id. & Location, Backbox Assembly.

/HJ/HY HOHU $GMXVW PHQW

Attach the four (4) Leg Assemblies to cabinet corners with the eight (8) leg bolts provided . Cabinet Leg

Start adjustment with the leg levelers turned all the way
in.
View the bubble in the level provided on the right side 3e -16
8
Hex
wood rail. Nut
Bubble
Bubble Level Adjust the front or rear levelers as necessary to cause
located on
the wood rail the bubble to float between the two (2) black lines.
next to the
Shooter Lane. Bubble
should be
between Use a pinball to roll down the center of the playfield for Leg Leveler
the 2 black
lines.
side-to-side leveling. turned all
the way in.
YOUR PLAYFIELD PITCH IS NOW AT 6.5° AS
REQUIRED FOR PROPER GAME PLAY!
Note: For custom adjustment greater than >6.5° can be achieved by turning out the rear leg leveler(s), however, it is not recommended.

(D V\$FF HVV6HU Y LF H6\VW HP 3RVL WL RQV

With the front molding & glass removed, carefully lift the playfield (take care when using the Bottom Arch to hoist).

Position 1
When lifted high enough, the Playfield Support
Slide Brackets (Fig. 1A) can be seen and can clear
the cabinet front (Fig. 1B). At this time, pull the play-
field toward the front of the cabinet, checking that the
mechanical components clear the cabinet front, then
rest the playfield on the Playfield Support Slide
Brackets at the front channel of cabinet (Fig. 1C);

Position 2
With the playfield at rest, hold the sides & pull toward
the front of the cabinet (approx. 6" to 8"), until
resistance is felt from Edge Slide Brackets stopping
against the Slide & Pivot Support Brackets located
on either side of the cabinet (Fig. 2A). At this time,
swivel the playfield toward the Backbox, then rest on
the top edge (Fig. 2B & 2C).

6HFWLRQ&KDSWHU 
3DJH $IWHU6HW8S
6HFWLRQ  & KD SW H U   R I  
*DP H 2SHUDWLR Q )HDWXUHV
6W DU WRI*D P H)HDW XU HV 'X ULQJ*DPH )H DWX UH V&RQWLQX HG
6WDUWLQJD1RUPDO*DPH )HDWXUH0RGH &RPELQDWLRQ6KRWV
Insert coin(s). The game generates a sound for the Features are lit on the playfield and started by
first coin & for each subsequent coin with the display completing certain shots (e.g. completion of Target
indicating the number of credits posted. Press the Banks, Orbit(s), Ramp(s) and/or any combination of
Start Button and a start-up sound is produced, and the shots).
the posted credits are reduced by one. Subsequent
players can be added (up to 4 can play!) by pressing 0XOWLEDOO
the Start Button before the end of ball 1 (with Multiball is started after completion of certain features
sufficient credit in the game). (amount of balls used depends on game rules).
The display now indicates the player or # of players

6HF*DPH2S
selected from the total depressions of the Start 5HSOD\)HDWXUH
Button. The display indicates the ball in play, and a Replay awards are given as the player exceeds a High
ball is served to the Shooter Lane. Pressing the Start Score Level during game play. This can be adjusted
Button after ball 1 of any player will start a new game with Standard Adj. 3, Replay Award (Default =
(if credits are available), but only if the Start Button is CREDIT). Players exceeding the High Score Levels
depressed for 2-3 seconds. This delay is to avoid can receive: CREDIT, EXTRA BALL, or SPECIAL.
accidental "re-starts" of a game. Note: Any partial Adjust to NONE if a replay award is not desired.
credit remaining during game play after the end of the
first ball, or power down, will be eliminated.
(QGRI*DPH)HDWX UHV
6WDUWLQJ7HDP3OD\ 'RXEOH V *DPH (QGLQJV
This option is adjustable with Standard Adjustment When all player(s) have played all balls (including any
(Adj.) 58, Team Scores (Default = NO). If Standard Extra Balls), the game ends. If power is interrupted
Adj. 58, Team Scores is changed to YES, then Team during the course of a game, it will end that game (see
Play will be made available. Team Play only works in Starting a Normal Game). Closure of the Plumb Bob
a 4-Player Game. The totals for Players 1/ 3 (Team 1) Tilt Switch according to the number of tilts set,
& Players 2 / 4 (Team 2) are then displayed individually Standard Adj. 22, Tilt Warnings (Default = 2) or
as well as the combined score for BOTH TEAMS. prolonged closure, will end the current Ball-In-Play.
Closure of the Slam Tilt Switch on the Coin Door ends
6WDUWLQJ7RXUQDPH QW3OD\ the current game(s).
This Pinball Game is Tournament Ready. Optional
Tournament betaBRITE Color Dot Display & 0DWF K)HDWXUH
hardware (sold separately) is available. Review At the end of each ball, earned bonuses are collected.
Section 3, Chapter 6, GO TO TOURNAMENT MENU, At the end of the last ball of a game (including any
for more info! extra balls, if applicable), earned bonuses are col-
lected, then the system produces a random 2-digit
Unlike a "Normal Game", the Tournament Game is number (a multiple of 10; 00 to 90). Matching the last
started by depressing the Tournament Start Button 2 digits of the player’s score with this number awards a
(located on the Front Molding, if installed). If adequate credit. In Std. Adj. 19, Match Percentage (Default =
credit(s) are posted and a Tournament is started 9%) can be changed from 0-10%. Changing the
(set-up properly) via the Service Menu (select the percentage to 0% displays the "Match Animation" at
"TOUR" Icon in the Main Menu), the Tournament the end of the game, however, will never match nor
Start Button will flash. Any adjustments or installs award anything. Changing this adjustment to OFF will
changed will not be in affect. Starting a Tournament not display the "Match Animation" nor award anything.
Game defaults to preprogrammed Tournament Rules
(e.g. No Extra Balls, Specials or Bonus Credits are
awarded); however, starting a Normal Game after a (QWHULQJ,QLWLDOV1DPH
Tournament Game will then revert back to any unique If player achieved a new High Score in a game or
adjustments or installs performed previously. During achieved a Special Feature (if given) the player may
and End of Game Features operate in the same enter 3 Initials. In Std. Adj. 36, HSTD (High Score To
manner. Date) Initials (Default = 3 Initials) can also be
changed to 10-Letter Name. Use the Flipper
'X UL QJ*DPH)HDW XU HV Buttons to choose a letter or character as seen on
the Dot Display. Hitting the Start Button locks in the
9LGHR0RGH letter or character and proceeds to the next letter. The
game then proceeds into the Game-Over Mode and
Our games may feature video interactive play modes. then to the Attract Mode.
Also, don’t forget to watch the display for hints or
instructions. The interactive video modes require the Note: Standard Adj. 41, Custom Message (Default
player to play on-screen using the flipper buttons. = ON) can be displayed during the Attract Mode; enter
When in video mode, the ball-in-play is "held" (usually letters in the same fashion. For more details on
in a Scoop, Eject Saucer or lock of some sort). Adjustments, see Section 3, Chapter 4.

... continued on the next page.

*DPH2SHUDWLRQ 6HFWLRQ&KDSWHU
)HDWXUHV 3DJH
 $ XW R  3H U FHQ WD JLQ J
This game is equipped with Auto Percentaging, Standard Adjustment (Adj.) 1, Replay Type (Default = AUTO,
adjustable). The Replay Percent is automatically adjusted, Standard Adj. 2, Replay Percentage, or you can set a
Fixed Replay Score. Four levels may be selected. Adjustments allow awarding of a "CREDIT" (or your setting) as
each level is exceeded. This can be adjusted with, Standard Adj. 3, Replay Award (Default = CREDIT). With the
Autopercentage Feature, if the actual replay percentage is higher or lower than that desired, the game will
automatically adjust for the new recommended percentage score(s). You may choose to make a different
"score-to-beat" adjustment; this is done by utilizing Standard Adj. 4, Replay Levels. For more details with
Adjustments, see Section 3, Chapter 4, GO TO ADJUSTMENTS MENU; also, see see Section 3, Chapter 5,
GO TO INSTALLS MENU (via the UTILITIES MENU) for further customization of your Pinball Game.

Print on Astrobrights® Solar Yellow #65

Wausau Paper Products (Stock #22731).
6HF*DPH2S

, QVW UX FW LRQ&D UG
Below is a COPY of the Game Instruction Card (SPI Number:
755-51A4-12-Y English Front / Spanish Back). For a replacement
Game Instruction Card simply COPY this page and cut out the card
as a temporary replacement until a new card is ordered through your
distributor; or download from our website, www.sternpinball.com,
and click on the pinball game desired or click the the Game Archive
link. Multiple language Instruction Cards are included with the PDF.

COPY &
CUT

FOLD
HERE 

6HFWLRQ&KDSWHU *DPH2SHUDWLRQ
3DJH )HDWXUHV
6HFWLRQ  & KD SW H U   R I  

7DEOHRI&RQWHQWV
IRU6HFWLRQ

&KDSWHU6HUYLFH0HQX,QWURGXFWLRQ ²
X Table of Contents for Section 3........................................................................................................................................................7
X Service Swtich X4 Set Acces & Use ................................................................................................................................................8
Z Function 1: SERVICE CREDITS MENU Z Function 2: VOLUME MENU Z Function 3: SERVICE MENU
X Service Menu Introduction ...............................................................................................................................................................9
Z How to Use This Section
X Indiana Jones• Pinball Service Menu Icon Tree....................................................................................................................10-11
X Exit Service Menu............................................................................................................................................................................12
Z Problem / Solution Table
&KDSWHU*272',$*1267,&60(18 ²
X Go To Switch Menu .........................................................................................................................................................................14
Z Switch Test Z Active Switch Test Z Switch Alerts
X Go To Coil Menu ..............................................................................................................................................................................15

6HF0HQX,QWUR
Z Single Coil Test Z Cycling Coil Test
X Go To Flash Lamps Menu ...............................................................................................................................................................15
Z Single Flash Lamp Test Z Cycling Flash Lamp Test
X Go To Lamp Menu ...........................................................................................................................................................................16
Z Single Lamp Test Z All Lamps Test Z Row Lamps Test Z Column Lamps Test Z Ordered Lamps Test
X Indiana Jones Tests ........................................................................................................................................................................17
X Ball Trough Test ..............................................................................................................................................................................17
X Technician Alerts.............................................................................................................................................................................18
X Knocker Test X Sound / Speaker Test X Begin Burn-In ........................................................................................................19
X Dot Matrix Test.................................................................................................................................................................................20
&KDSWHU*272$8',760(18 ²
X Earnings Audits [ #1 – #13 Definitions ] ........................................................................................................................................21
X Standard Audits [ #1 – #59 Definitions ] ................................................................................................................................. 22-23
X Feature Audits [ #1 – #107+ ] ..........................................................................................................................................................24
X Tournament Audits [ #1 – #14 ] subject to change .......................................................................................................................24
X Dump Audits to USB .......................................................................................................................................................................24
&KDSWHU*272$'-8670(1760(18 ²
X Standard Adjustments [ #1 – #63 ]........................................................................................................................................... 25-32
X Feature Adjustments [ #1 – #16+ ] ........................................................................................................................................... 32-34
&KDSWHU*27287,/,7,(60(18 ²
X Go To Installs Menu................................................................................................................................................................... 35-36
Z Install Extra Easy Z Install Easy Z Install Medium Z Install Hard Z Install Extra Hard Z Install 3-Ball Z Install 5-Ball
Z Install Competition Z Install Directors Cut Z Install Home Play Z Install Novelty Z Install Add-A-Ball Z Install Factory
X Enter Custom Message...................................................................................................................................................................37
X Set Custom Pricing .........................................................................................................................................................................37
X Set Date / Time.................................................................................................................................................................................38
X Go To Resets Menu .........................................................................................................................................................................38
Z Reset Coin Audits Z Reset Game Audits Z Reset Grand Champion (Score) Z Reset High Scores Z Reset Credits
Z Reset Factory Settings
X Go To USB Menu .............................................................................................................................................................................38
Z Update Game Code Z Backup to USB Memory Stick Z Dump to USB Memory Stick
&KDSWHU*27272851$0(170(18 ²
X Start Tournament / Stop Tournament ...................................................................................................................................... 39-40
X View Tournament Datat X Tournament Audits [ #1 – #14 ] X Sign Messages A-B ..............................................................40
v1.11+

6HUYLFH 6HFWLRQ&KDSWHU
0HQX6\VWHP 3DJH
 6HUYLFH6ZLWFK;6HW$FFHVV 8VH ,QVLGH &RLQ 'RRU

The 4-Button Service Switch Set provides access for three (3) ,I &RLO
functions available for your use: 1: SERVICE CREDIT, )ODVKODPS 7HVWLQJ
2: VOLUME [ – ] / [ + ] and 3: SERVICE MENU.
6 6
WKH 3OD\ILHOG

6HUYLFH 6ZLWFK ; 6HW 3RZHU ,QWHUORFN

*UHHQ 6ZLWFK PXVW EH
5HG
5HG SXOOHG RXW
D

%ODFN

To access any of these three (3) functions you must first open the Coin Door (see pictorial above) with the
Game in the Attract Mode (not already in any Function or Menu stated below) and then follow below.
Pushing the GREEN BUTTON first.
W)XQFWLRQ6(59,&(&5(',760(18
Pushing the Green [ SERVICE CREDIT ] Button first, adds a
Service Credit per push (will not affect your audits as "paid"
credits). This is useful for the technician to test games in regular
play without affecting the game audits. Each depression adds 1
credit; up to 50 credits can be applied. Standard Adjustment 23,
Credit Limit, determines this, however, it can be changed from
04-50; for details see Chapter 4 of this Section 3.
6HF0HQX,QWUR

Note: Once your credits are added, this menu will automatically exit a few
seconds after the last button depression or when the Green [ BACK ] or Black
[ SELECT ] Button is pushed. This function is disabled if Standard Adjustment
38, Free Play, is set to YES. The Service Credits are limited to the Credit Limit in addition to any paid credits present in the game (e.g. If the
Credit Limit is 30, with 8 paid credits present, only 22 Credits can be applied.).

Pushing either RED BUTTON first. Pushing either RED BUTTON first.

S)XQFWLRQ92/80(0(18S
Pushing either of the Red [ VOLUME ] Buttons first, enters the VOLUME MENU. While in this Mode, to
DECREASE the volume, hold down or depress the 1st Red [ < / – ] Button until desired the volume is achieved;
to INCREASE the volume, hold down or depress the 2nd Red [ + / > ] Button until the desired volume is achieved.
Note: The volume can be set between 0-63; Once your adjustments are made, this menu will automatically exit a few seconds after the last
button depression or when the Green [ BACK ] or Black [ SELECT ] Button is pushed.

Pushing the BLACK BUTTON first.

W)XQFWLRQ6(59,&(0(18
Pushing the Black [ SELECT ] Button first, enters the SERVICE
MENU. Once in, navigate through all menus by depressing the
Service Menu Buttons. Use the Red [ < / – ] or [ + / > ] Buttons
to move LEFT / RIGHT, NEXT/PREVIOUS (audits/adjustments) or
to INCREASE / DESCREASE an adjustment (setting). Use the
Black [ SELECT ] Button to select a highlighed Icon, move to the
next line of text or to answer "OK" where applicable. Use the
Green [ BACK ] Button to exit or escape back.

Please read Section 3, Chapters 2-6, for explanation on all Icons

and Menus. Read! Read! Read!

6HFWLRQ&KDSWHU 6HUYLFH0HQX
3DJH ,QWURGXFWLRQ
6HU YLFH0HQX,QW U R GX FWLRQ
Important: The Switch Bracket holds the Playfield Power Interlock. It is located just inside the Coin Door
frame (see pictorial of the Coin Door on the previous page). The Button Switch for the Playfield Power Interlock
Switch must be pulled out for electro-mechanical device testing or diagnostic purposes (this is required). If this
button is pushed in, the Playfield Power is disabled while the Coin Door is OPEN.

+RZWR8VH 7KLV6H FWLRQ

This section will cover all functions available in the SERVICE MENU in a Step-By-Step process. This section is
divided into chapters which coincide with the MAIN MENU (will also provide more detailed information). The
previous and following pages in this Chapter will instruct the operator on how to move through the Menus. It’s
simple, easy and fun to use!

To get into the SERVICE MENU MODE review "Function 3: SERVICE MENU" on the previous page. After
Power-Up, push down the Black [ SELECT ] Button to begin. Looking at the display you will momentarily see
"SERVICE MENU" followed by the MAIN MENU:

6HF0HQX,QWUR
Use the Red [ < / – ] / [ + / > ] Buttons to move the selected Icon left or right, and the Black [ SELECT ]
Button fto activate the selected Icon.

The MAIN MENU now appears with the "DIAG" Icon (GO TO DIAGNOSTICS MENU) highlighted:

As the operator views the Menu Screen(s), the symbols indicates that there are more Icons to select in
each direction. The Icon selected will blink. Pushing the Black [ SELECT ] Button will select the Icon and the
Menu Screen will change to the menu selected. Select the Green [ BACK ] Button to move backwards through
the menu levels. Press the Green [ BACK ] Button repeatedly or select the "QUIT" Icon to completely exit the
SERVICE MENU Mode.

View the SERVICE MENU Icon Tree on the next pages for a complete overview of all menus used in this system.
The "HELP" Icon provides an explanation of ICON usage or any other information in the Menu where the "HELP"
Icon was selected (when available).

DIAG: GO TO DIAGNOSTICS MENU | AUD: GO TO AUDITS MENU | ADJ: GO TO ADJUSTMENTS MENU

UTIL: GO TO UTILITIES MENU (INSTALLS, CUSTOM MSG., CUSTOM PRICING, SET TIME, RESET & USB)
TOUR: GO TO TOURNAMENT MENU (START TOURNAMENT, VIEW TOURNAMENT DATA, SIGN MESSAGES)

>> TO UPDATE THE GAME CODE, REVIEW THE STEPS ON THE INSIDE FRONT COVER OF THIS MANUAL.

Use both the manual and the display to help customize, troubleshoot and/or diagnose faults, if any.

6HUYLFH0HQX 6HFWLRQ&KDSWHU
,QWURGXFWLRQ 3DJH
 Sec. 3: ...Menu Intro.

MAIN MENU These non-selectable Icons

GO TO GO TO GO TO GO TO EXIT

Page 10
DIAG- GO TO ADJUST- UTILITIES TOUR- SERVICE appear in the selected Menu
NOSTICS AUDITS MENTS NAMENT only when there are MORE
MENU MENU MENU MENU MENU MENU
Icons to the LEFT or to the
RIGHT available for selection.

*XWHEN ENTERING THE NOTED MENUS, YOU MUST

PULL OUT THE POWER INTERLOCK SWITCH FOR
OPERATION WITH THE COIN DOOR OPEN.

Section 3, Chapter 1
EXIT THE SERVICE MENU BY SELECTING THIS ICON
IN ANY MENU AND RETURN TO THE ATTRACT MODE.

AUDITS MENU ADJUSTMENTS MENU UTILITIES MENU TOURNAMENT MENU

TOUR- DUMP STANDARD FEATURE CONTINUED START STOP VIEW TOUR- SIGN
EARNINGS STANDARD FEATURE NAMENT
AUDITS AUDITS AUDITS ADJUST- ADJUST- TOUR- TOUR- TOURNA- NAMENT MESSAGES
X
AUDITS AUDITS TO USB MENTS MENTS NEXT PAGE. NAMENT NAMENT MENTXDATA AUDITS A-B

DIAGNOSTICS MENU
* * * * *

RETURN EXIT DISPLAY

GO TO GO TO GO TO GO TO INDIANA BALL TECH- SOUND/ BEGIN DOT TICKET TO ... SERVICE HELP
SUB-MENUS.

SWITCH COIL FLASH LAMP JONES TROUGH NICIAN FIRE SPEAKER BURN MATRIX DISPENS- [ MENU ] MENU SCREEN
MENU MENU LAMPS MENU TEST TEST ALERTS KNOCKER TEST IN TEST ER TEST
CONTINUATION OF

MENU ... MENUS CONTINUED

Indiana Jones™ Pinball Service Menu Icon Tree

ACTIVE SINGLE CYCLING SINGLE CYCLING SINGLE ALL ROW COLUMN ORDERED
SWITCH SWITCH SWITCH COIL COIL FLASH FLASH LAMP LAMPS LAMPS LAMPS LAMPS
TEST TEST ALERTS TEST TEST LAMP LAMP TEST TEST TEST TEST TEST
TEST TEST
SWITCH MENU COIL MENU FLASH LAMPS MENU LAMP MENU

Introduction
Service Menu
 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 MAIN MENU These non-selectable Icons
For more detailed information on the Menus and, GO TO GO TO GO TO GO TO GO TO EXIT appear in the selected Menu
DIAG- AUDITS ADJUST- UTILITIES TOUR- SERVICE
Sub-Menus, review Section 3, Chapters 2-–6 . NOSTICS MENU MENTS MENU NAMENT MENU only when there are MORE
MENU MENU MENU Icons to the LEFT or to the

Introduction
RIGHT available for selection.

Service Menu
EXIT THE SERVICE MENU BY SELECTING THIS ICON
SEE PREVIOUS PAGE. IN ANY MENU AND RETURN TO THE ATTRACT MODE.

UTILITIES MENU NOTE: Depending on Game Type, Version, selections made, Dip Switch settings, location and/or areas,
some Icons may appear non-functional or may not appear at all. Some Icons change depending on
selections (e.g. Selecting and activating the "STRT" Icon [ Start Tournament ] will be replaced with the
"STOP" Icon [ Stop Tournament ] ). In displays where changes can be made or to perform a function,
remember, use the GREEN Button to go [ BACK ], exit or escape, the RED Buttons to [ < / – ] DECREASE
GO TO ENTER SET SET GO TO GO TO / [ + / > ] INCREASE a value or setting, and the BLACK Button to [ SELECT ] next or as 'OK' / 'ENTER'.
INSTALLS CUSTOM CUSTOM DATE / RESETS USB
MENU MESSAGE PRICING TIME MENU MENU

RESET RESET RESET RESET RESET UPDATE BACKUP DUMP

COIN GAME GRAND HIGH RESET FACTORY TO USB TO USB
AUDITS AUDITS CHAMPION SCORES CREDITS SETTINGS TO UPDATE GAME CODE, MOVE DIP SWITCH #8 TO 'ON' (on
GAME MEMORY
CODE MEMORY
STICK STICK
CPU/SND PCB). PERFORM CPU / SND PCB RESET PRESS THE
RESET MENU WHITE BUTTON. FOLLOW ON-SCREEN PROMPTS (REVIEW USB MENU
INSIDE COVER).

INSTALL INSTALL
INSTALL INSTALL
INSTALL INSTALL
INSTALL INSTALL INSTALL
INSTALL INSTALL
INSTALL INSTALL INSTALL INSTALL INSTALL
INSTALL INSTALL INSTALL
INSTALL RETURN EXIT DISPLAY
EXTRA EASY
EASY MEDIUM
MEDIUM HARD
HARD EXTRA 3-BALL
3-BALL 5-BALL COMPETI- DIRECTOR'S
5-BALL X HOME NOVELTY
NOVELTY ADD-A- FACTORY TO ... SERVICE HELP
SUB-MENUS.

EASY XX XX XX HARD XX XX TION CUT PLAY XX BALL FACTORY

XX [ MENU ] MENU SCREEN
CONTINUATION OF

I N S TA L L S M E N U ... MENUS CONTINUED

Indiana Jones™ Pinball Service Menu Icon Tree Continued

Note: Press [ SELECT ] to Install; Press [ BACK ] to cancel. After selection of any of the Install Icons, the request is installed and
returns to the Install Menu. The last icon activated before exiting this menu will supercede any previous Icon selected in the group.

Page 11
Section 3, Chapter 1
Sec. 3: ...Menu Intro.
 ([ LW 6HU Y LF H0HQX
In the MAIN MENU and in all SUB-MENUS (where the "QUIT" Icon is present), if the "QUIT" Icon is
selected and activated, or the Green [ BACK ] Button is selected repeatedly (depending on which
sub-menu you’re in...), the SERVICE MENU Session will be exited and returned to the Attract Mode.
D

Turning the game on/off will start the Power-Up Routine. Upon Power-Up, the DISPLAY will indicate the
COUNTRY, FILE VERSION and LANGUAGE(S) installed. LANGUAGE/COUNTRY: change via Dip Switch.

The below Problem / Solution Table was designed to answer some common problems frequently asked.
3UREOHP6ROXWLRQ7DEOH
PROBLEM SOLUTION
Will not enter the SERVICE x Check the Service Switches [ GREEN, RED (X2) & BLACK Buttons ] for loose connections or bad ground.
MENU after depressing the x Check the associated wiring harness to/from the CPU/Sound Board, Connector J13.
Black [ SELECT ] Button. x Check CPU/Sound Board for possible failure.
6HF0HQX,QWUR

All Service Buttons [ x x x x x Check the Service Switches wiring harness for poor or no connection and/or broken wires.
Buttons ] appear nonfunctional.
The Green Button in the Attract x Check to make sure the Game is not in "Free Play." If the game is set to Free Play, adding Service
Mode will not enter the SERVICE Credits is not required.
CREDITS MENU to add Service x Check the Service Switches wiring harness for poor or no connection and/or broken wires.
Credits.
x Check the Dot Matrix Display for loose wiring harness for poor or no connection and/or broken wires.
The Display "blanks out." x Check F1 (3/4A Fuse) on the Display Power Supply Board. Refer to Section 5, SCHEMATICS &
TROUBLESHOOTING.
Icons "scroll" along continuously x Check for a stuck switch on either of the Red Buttons.
in the MAIN MENU.
The Start and Flipper Buttons x This is normal. These switches are deactivated, as they are a part of the Switch Test.
do not select or activate Icons in Refer to Section 3, Chapter 2, GO TO DIAGNOSTICS MENU, Switch Test.
the SWITCH TEST MENU.
Can’t move selection of Icon with x Check the Flipper Buttons for loose connections or bad Ground and refer to Section 5, Chapter 2,
the Left and/or Right Flipper Playfield Wiring, #-Flipper Circuit Wiring Diagram.
Buttons. x This is normal only in Diagnostic’s Switch & Active Switch Tests (see previous Problem).
x Some functionality of the Service Menu may not have been completed during development. If exists, it
Some Icons appear non-func- should only be a non-critical function, such as the "HELP" Icon, which will explain the usage of icons.
tional in the MENU or missing. When completed, a software update will correct the problem. Software updates are announced via
Service Bulletins (if critical) and on our website http://www.sternpinball.com/GAME-code.shtml; view
the Game Code Library Message Board Marquee or click Previous Messages for past announcements.
In COIL TEST MENU, the coils
and flashlamps do not fire after x Ensure the POWER INTERLOCK SWITCH is pulled out (see the start of this Chapter).
pressing the Black [ SELECT }
Button.
In the SERVICE MENU, the
volume cannot be adjusted with x The Volume adjustment can only be made when in the Attract Mode (see the start of this Chapter).
either of the Red Buttons.
In the SERVICE MENU, the
display seems to lock up, or the x If you cannot clear the situation by exiting back one Menu, exit completely out of the SERVICE MENU,
Help Display appears to be and re-enter. If the problem persists, call Technical Support for additional help.
non-functional.

,)<28127($1<27+(5352%/(06RU
+$9($1<6<037206127'(6&5,%('
$%29(3/($6(&$//7(&+1,&$/
6833257 
237,21 62:(0$<$66,67<28

6HFWLRQ&KDSWHU 6HUYLFH0HQX
3DJH ,QWURGXFWLRQ
6HFWLRQ  &K DS WHU    RI 

To initiate, from the MAIN MENU, select the "DIAG" Icon. The DIAGNOSTICS MENU provides tests for switches,
coils, flash lamps, lamps, sounds and dots in the Dot Matrix Display. Each feature may be tested manually or
automatically after entering the SERVICE MENU (see Section 3, Chapter 1, Service Menu Introduction).
The [ CYCLING COIL TEST ] / [ FLASH LAMP TEST ] may be used for a quick verification of automatic test
functions. The [ SWITCH TEST ] / [ SINGLE COIL TEST ] / [ SINGLE LAMP TEST ] / [ ALL LAMPS TEST ] /
[ ROW LAMPS TEST ] / [ COLUMN LAMPS TEST ] / [ FLASH LAMP TEST ] may be used for troubleshooting.

All DIAGNOSTICS MENU Icons and there usages are explained throughout this chapter in the same order as
seen in the Dot Matrix Display. NOTE: Depending on Game Type, Version, selections made, Dip Switch settings,
location and/or areas, some Icons may appear non-functional or may not appear at all. Some Icons change
depending on selections (e.g. Selecting and activating the "STRT" Icon [ Start Tournament ] will be replaced with
the "STOP" Icon [ Stop Tournament ] ). Icons and/or functions, order and operation are subject to change.

6HF'LDJQRVWLFV
In displays where changes can be made or to perform a function, use the GREEN Button to go [ BACK ], exit or
escape, the RED Buttons to [ < / – ] MOVE BACK / LEFT / DECREASE / [ + / > ] MOVE FORWARD / RIGHT /
INCREASE a value or setting, and the BLACK Button to [ SELECT ] next or as "OK / ENTER / ENERGIZE."

Important: Upon Power-Up (Game CPU Reset) or opening the Coin Door watch the Display for any Alerts.*

This audible / visual alert display is shown when the 50V / 20V
Power is disabled (by opening the Coin Door). PULL OUT THE
INTERLOCK SWITCH ONLY WHILE IN THE SERVICE MENU
FOR COIL OR SWITCH TESTING & BURN-IN WHEN THE
COIN DOOR IS REQUIRED TO STAY OPEN FOR SERVICE
BUTTON USE! Pulling out the Power Interlock Switch or
pressing the ’escape’ Green [ BACK ] Button will remove the alert display. Initial display presentation is
accompanied by 3 audible tones (the bright display warning will go dim after approximately 30 seconds).

This alert display is shown momentarily during Game Mode or

Power-Up to alert the operator of a device malfunction (device or
mechanism doesn’t energize or is energized repeatedly).
OPERATOR ALERT! works by monitoring any switch activated
device that has the potential to trap a ball when disabled (e.g. in
the Shooter Lane, Scoop or Eject Holes, etc.). This alert can
also appear if a switch associated with a device (e.g. Ball Trough, Auto Plunger, etc.) is stuck closed (caused by a
switch jam or stuck ball); the game will activate the device a predetermined number of times and if the problem is
still detected, this device or switch will be noted in Switch Alerts (next page) and/or Technician Alerts (Page 18).
Upon entering the SERVICE MENU, if an asterisk " * " is
displayed after the words "SERVICE MENU," the game has
detected possible faulty devices, switches and/or missing
pinballs. Press the either of the Red Buttons (short-cut to the
TECHNICIAN ALERTS MENU) or continue into the SERVICE
MENU (press the Black Button again), select the "DIAG" Icon
and "TECH" Icon for the Technician Alerts information (Page 18).

CAUTION! Remove all pinballs from the Ball Trough prior to lifting the playfield to it’s full upright position
for servicing. PULL OUT the Power Interlock Switch for operation. To eject pinballs, select the "DIAG"
Icon from the MAIN MENU to enter the DIAGNOSTICS MENU. Select the "CLR" Icon to enter the BALL
TROUGH TEST MENU. Press the Black [ SELECT ] Button. To return to the DIAGNOSTICS MENU, press the
Green [ BACK ] Button. This feature also useful to retrieve a pinball for game testing in Switch or Coil Tests.

*R7R 6HFWLRQ&KDSWHU
'LDJQRVWLFV0HQX 3DJH
 *R7R6ZLW FK0HQX
To initiate, from the DIAGNOSTICS MENU, select the "SW" Icon. Switches are configured in an 4 X 16
Matrix of Rows [ Switch Drives ] and Columns [ Sw. Returns ] with up to 64 possible switches. Dedicated
Switches are configured in a 2 X 16 Matrix of Rows [ Dedicated Sw. Drives / Ground ] and Column [ Ded.
Switch Returns ] with up to 32 possible dedicated switches (includes the 8 dip switch positions). The SWITCH
TEST MENU consists of three (3) parts: Switch & Active Switch Tests and Switch Alerts to test all switches.
D

Reminder: The Flipper & Start Buttons (part of Switch Tests) are temporarily disabled as Service Menu Navigation Buttons during these
test(s) so they can be tested and shown on-screen. Pressinng the Green [ BACK ] Button (Dedicated Switch D-21), Light Green-Black /
Black (GND), will exit Switch Test or Active Switch Test. Upon entering Switch Test, you will notice that some switches are already indicated as ’closed’. 6
6ZLWFK7HVW
To initiate, from the SWITCH MENU, select the "TEST"
Icon. Ensure the Power Interlock Switch is pulled out
if testing with the Coin Door open and the activation of
coils is required. Upon entering Switch Test, you will notice that D-24 position is highlighted and accompanied by a short audible tone when pressed. 6
some switches are already indicated as closed. In the examples,
the 4-Ball Trough Switches #18, #19, #20 & #21 are shown
closed (pinballs at rest in the ball trough), along with the Flipper
E.O.S. Dedicated Switches D-10 & D-12 (End-of-Stroke
Switches are ’normally closed’). If the game has more flippers
with E.O.S. Dedicated Switches, CPU Dip Switch Setting other
than 1-8 OFF or switches stuck closed, more dots will be After pressing the switch (to make it close), the display will indicate the last switch number. 6
indicated (enter Active Switch Test to reveal the names).
In Switch Test, close each switch and observe the display (switch closure is
accompanied by a short audible tone). In the example, the Black [ SELECT ]
Button Dedicated Switch D-24 is pressed. The Dot Matrix Display will light up
6HF'LDJQRVWLFV

(highlight) the corresponding dot in the on-screen matrix, display the switch
name, switch number and the Switch Drive / Return wire colors. When not
closing a switch, the display indicates NONE and the last switch number closure.
For the Switch Matrix Grid and Dedicated Switch Grid, see Find-It-In-Front: Dr.
Pinball, DR. 4 or escape out of this test and enter Active Switch Test (described
below) to view the names of the switches closed. Note: Pressinng the Green
[ BACK ] Button (Ded. Switch D-21), Lt. Green-Black / Black (GND), will exit the
Switch Test.

CAUTION! COIL MECHANISMS WHEN ACTIVATED

HAVE FAST MOVING PARTS! While performing Switch
Test with the Coin Door closed or open (with the Power
Interlock Switch is pulled out), D O N O T U S E Y O U R
F I N G E R to test switches which are associated with a coil
mechanism such as a Vertical Up-Kicker (hole with a switch),
Slingshots, Bumpers, etc..

$FWLYH6ZLWFK7HV W
To initiate, from the SWITCH MENU, select the "ACT"
Icon. In Active Switch Test, if any switches are stuck
closed (or normally closed from the presence of pin-
ball(s) as in the Ball Trough), the display will flash the correspond-
ing dot(s) in the on-screen matrix, display the name and the
Switch Drive / Return wire colors. If more than one switch is
closed, the switch information will change with each switch. This
cycle continues until all switches are cleared or until Active
Switch Test is exited. In the example, the Black [ SELECT ]
Button Dedicated Switch D-24 is pressed and held down. The ... D-24 is held down. The display will cycle and flash each dot, naming each switch ... closed. 6
display will cycle and flash each dot, naming each switch which
is closed. To determine the switch number, compare the high-

[
lighted dot to the same position in the Switch Matrix Grid, see
Find-It- In- Front: Dr. Pinball, DR. .

6ZLWFK$OHUWV
To initiate, from the SWITCH MENU, select the "ALRT" Icon. In Switch Alerts Menu, possible inoper-
able switches are marked with an "X" (OUT OF SERVICE). Mark switches IN or OUT OF SERVICE by
pressing the Black Button while the intended switch is highlighted and change with either of the Red
Buttons. Switches which are determined as "OUT OF SERVICE" by the game or manually, will be automatically
marked as "IN SERVICE" as soon as the game determines a valid switch closure (after adjusting, fixing or
replacing the switch, then testing/actuating the switch). Note: A Factory Reset will also put the switch back "IN
SERVICE" in which the game will need to redetermine if the switch should be marked OUT OF SERVICE.

6HFWLRQ&KDSWHU *R7R
3DJH 'LDJQRVWLFV0HQX
 *R7R&RL O0HQX
To initiate, from the DIAGNOSTICS MENU, select the "COIL" Icon. Coils #01 – #16 are typically High
Current Coils (although Low Current Coils may be used in these positions & will be noted). Coils #17 –
#32 are typically Low Current Coils. Flash Lamps are typically used in positions #25 – #32 (although
Flash Lamps may be used in any position and will be noted). Auxiliary Coils may be used in positions #33 – #35.

Remember, use the GREEN Button to go [ BACK ], exit or escape, the RED Buttons to [ < / – ] GO BACK
[ + / > ] GO FORWARD, and the BLACK Button to [ SELECT ] ENERGIZE the coil (solenoid) or flash lamp.

6LQJOH&RLO7H VW
To initiate, from the COIL MENU, select the "TEST"
Icon. Ensure the Power Interlock Switch is pulled out
if testing with the Coin Door open. Upon entering
Single Coil Test, you will notice the #1 coil is shown. The Dot
Matrix Display will indicate the coil or flash lamp name, coil
(solenoid) or flash lamp number and the Coil or Flash Lamp
7\SLFDO&RLO:LULQJ 6FKHPDWLF
Power Line / Drive Transistor Control Line wire colors. To
determine the "Pin-Outs" from the I/O Power Driver Board, the
Coil Voltage Gauge-Turns (e.g. 23-800) or lamp type (e.g. #89 or

_
#906 Bulb), view the Coils Detailed Chart Table, see Find-It-In-
Front: Dr. Pinball, DR. or for more on troubleshooting and
diagnosing, see Section 5.

&\FOLQJ&RLO7HVW

6HF'LDJQRVWLFV
To initiate, from the COIL MENU, select the "CYC" Icon.
Ensure the Power Interlock Switch is pulled out if
testing with the Coin Door open. The test pulses each
regular coil or flash lamp sequentially (cycling) on the Playfield
and in the Backbox (if coils or flash lamps are used). The Dot
Matrix Display indicates the same information you will find in Single Coil Test.

*R7R)ODVK/D PSV0HQX
To initiate, from the DIAGNOSTICS MENU, select the "FLASH" Icon. The two tests allows the technician
to easily spot any burned-out flash lamps and replace them. Unlike Single Coil Test, which tests all coil
(solenoids), including flash lamps, Single and Cycling Flash Lamp Tests, test only the flash lamps
used in the game. Flash Lamps are typically used in positions #25 – #32 (although Flash Lamps may be used in
any position and will be noted).

Remember, use the GREEN Button to go [ BACK ], exit or escape, the RED Buttons to [ < / – ] GO BACK /
[ + / > ] GO FORWARD, and the BLACK Button to [ SELECT ] ENERGIZE the flash lamp.

6LQJOH)ODVK /DPS7H VW
To initiate, from the FLASH LAMPS MENU, select the
"TEST" Icon. Ensure the Power Interlock Switch is
pulled out if testing with the Coin Door open. Upon
entering Single Flash Lamp Test, you will notice the first Flash
Lamp is shown. The Dot Matrix Display will indicate the flash %XOE7\SHVXVHGIRU)ODVK/DPSV
lamp name, flash lamp number and the Flash Lamp Power Line /
Drive Transistor Control Line wire colors. To determine the "Pin-
Outs" from the I/O Power Driver Board or lamp type (e.g. #89 or

_
#906 Bulb), view the Coils Detailed Chart Table, see Find-It-In-
Front: Dr. Pinball, DR. or for more on troubleshooting and
diagnosing, see Section 5.
#906 Bulb #89 Bulb
(Wedge Base) (Bayonet)
165-5004-00 165-5000-89-HF

&\FOLQJ)ODVK/DPS7HV W
To initiate, from the FLASH LAMPS MENU, select the
"CYC" Icon . Ensure the Power Interlock Switch is pulled out if testing with the Coin Door open. The
test pulses each flash lamp sequentially (cycling) on the Playfield and in the Backbox (if flash lamps are
used). The Dot Matrix Display indicates the same information you will find in Single Flash Lamp Test.

*R7R 6HFWLRQ&KDSWHU
'LDJQRVWLFV0HQX 3DJH
 *R7R/D PS0HQX
To initiate, from the DIAGNOSTICS MENU, select the "LAMP" Icon. Controlled lamps are configured in
and 8 X 10 Matrix of Rows [ Lamp Returns / Ground ] and Columns [ Lamp Drives / 18VDC ] with up to
80 lamps possible. The LAMP TEST MENU consists of five (5) parts: Single Lamp Test, Test All
Lamps, Row Lamps Test, Column Lamps Test and Ordered Lamps Test* to test all lamps.

Remember, use the GREEN Button to go [ BACK ], exit or escape, the RED Buttons to [ < / – ] GO BACK /
D

LEFT / [ + / > ] GO FORWARD / RIGHT, and the BLACK Button to [ SELECT ] next or as "OK / ENTER."
Upon entering Single Lamp Test, ... the #1 lamp is shown. .... Display will light up ... the dot ... :

6LQJOH /DPS7H VW
To initiate, from the LAMP MENU, select the "ONE"
Icon. As each lamp is selected, the lamp will light at it’s
location on the playfield as well as the Dot Matrix
Display. Upon entering Single Lamp Test, you will notice the #1 lamp is shown. The Dot Matrix Display will light

]
up (highlight) the corresponding dot in the on-screen matrix, display the lamp name, lamp number and the Lamp
Return / Drive wire colors. For the Lamp Matrix Grid, see Find-It-In-Front: Dr. Pinball, DR. , at the beginning
section of this Service Game Manual.
Upon entering All Lamps Test, ... the Dot Matrix Display is flashing "ALL LAMPS ON" ... :

$OO/DPSV7HVW
To initiate, from the LAMP MENU, select the "ALL"
Icon. Upon entering All Lamps Test, you will notice the
Dot Matrix Display is flashing ALL LAMPS ON and the
lamps on the playfield will be lit, alternating between the rows in the Lamp Matrix Grid. The Dot Matrix Display will
light up (highlight) all of the dots in the on-screen matrix.
6HF'LDJQRVWLFV

Upon entering Row Lamps Test, you will notice the #1 lamp row is shown. :

5 RZ/DPSV7HV W
To initiate, from the LAMP MENU, select the "ROW"
Icon. As each lamp row is selected, the lamps in the
row will light on the playfield as well as the Dot Matrix
Display. Upon entering Row Lamps Test, you will notice the #1 lamp row is shown. The Dot Matrix Display will
light up (highlight) the corresponding row of dots in the on-screen matrix, display the lamp row number, the Lamp
Return wire colors, the I/O PCB Connector and transistor number.
Upon entering Column Lamps Test, you will notice the #1 lamp column is shown. :

&ROXPQ/DPSV 7HVW
To initiate, from the LAMP MENU, select the "COL"
Icon. As each lamp column is selected, the lamps in
the column will light on the playfield as well as the Dot
Matrix Display. Upon entering Column Lamps Test, you will notice the #1 lamp column is shown. The Dot Matrix
Display will light up (highlight) the corresponding row of dots in the on-screen matrix, display the lamp column
number, the Lamp Drive (18VDC) wire colors, the I/O PCB Connector and IC number.

%XOE7\SHVXVHGIRU&RQWURO/DPSV
#44 :
LED
White (Bayonet) White
112-5023-08
9Bulb
#555 #44
Bulb
: Clear
Clear (Wedge) (Bayonet)
165-5002-00 165-5004-00-HF
9LED
#555
(Wedge)
112-5024-08

* If not required in this game, Icon will not be shown.

2UGHUHG/DPSV 7H VW
To initiate, from the LAMP MENU, select the "ORD" Icon.
If required, this Icon will appear in the LAMP MENU.
Identical to Single Lamp Test, however, the lamps lit are
not in the Lamp Matrix numeric order, but ordered or arranged in
separate localized grouping(s) for easier lamp checking.

6HFWLRQ&KDSWHU *R7R
3DJH 'LDJQRVWLFV0HQX
 , QGLDQD-RQHV7HVW V
To initiate, from the DIAGNOSTICS MENU, select the "INDY" Icon. Ensure the Power Interlock Switch
is pulled out when testing with the Coin Door open. This Menu is provided to allow the technician a
simple method of testing game specific coils and/or switches, if required.:

6HF'LDJQRVWLFV
%DOO7URX JK7HVW
To initiate, from the DIAGNOSTICS MENU, select the "CLR" Icon. Ensure the Power Interlock Switch is
pulled out if testing with the Coin Door open. This Menu is provided to allow the technician a simple
method of removing the balls from the trough and also, to test functionality of the trough, ensuring proper
trough operation. Upon entering Ball Trough Test, you will notice that four switches are already indicated as
closed. In the example, the 4-Ball Trough Switches #18, #19, #20 & #21 are shown closed (pinballs at rest in the
ball trough). To return to the DIAGNOSTICS MENU, press the Green [ BACK ] Button.

Press the Black [ SELECT ] Button to eject the ball in the first
position Switch #21 (VUK OPTO Trough #1 (R)). Simultaneously,
the Dot Matrix Display and the playfield will eject the ball to the
Trough Up-Kicker, eject from the Trough Up-Kicker into the
Shooter Lane, momentarily closing Switch #23 (Shooter Lane),
and is ejected onto the playfield where the technician can easily
retrieve the pinball or allow the ball(s) to re-enter the trough to continue Ball Trough Test. The Dot Matrix Display
indicates Switch #18 (4-Ball Trough #4 (L)) as open as the remaining three (3) pinballs shift over one (1) position
to the right. If the technician allows the ejected pinball to reenter the ball trough, the Dot Matrix Display will
indicate Switch #18 as closed. REMINDER: Switch #22 is the stacking OPTO switch; If more than five (5) pinballs
are used, the additional switches will be noted. In this game, four (8) pinballs are used and required for proper
operation. ***THIS GAME ONLY*** Four (4) of the eight (8) pinballs are automatically fed into the Ark Mech.

CAUTION! Continuous use off the above test may overheat the Trough Up-Kicker Coil.

*R7R 6HFWLRQ&KDSWHU
'LDJQRVWLFV0HQX 3DJH
 7HFK QL FL DQ$O HUW V
To initiate, from the DIAGNOSTICS MENU, select the
"TECH" Icon. This Menu is provided to show any switch
or solenoid problems and/or missing pinballs. If upon
entering the SERVICE MENU the display indicated an asterisk
( * ) and "USE –/+ TO VIEW TECH. ALERTS", alerts are present.
D

After pressing either Red [ < / – ] / [ + / > ] Button or selecting

this Icon in the DIAGNOSTICS MENU, the display will indicate
the alert(s). If there are 2 alerts present, the display will indicate
(1/2) with the 1st alert on the display. Press the Red [ + / > ]
Button to view the second alert (2/2). The second number in the
parenthesis ( ) after the slash (/) indicates how many alerts are
present. Refer to the start of this chapter (bottom of Page 13) regarding "Upon entering the SERVICE MENU *"
indication and to SWITCH ALERTS (Page 14). To return to the DIAGNOSTICS MENU, press the Green [ BACK ]
Button. Note: While in this menu, an option may be present to jump (short-cut) to the appropriate Testing Menu
(e.g. Coil Test, Switch Test, Game Specific Test or Ticket Dispenser Test, if installed).
NOTE ON SWITCH DETECTION : During game play, activation of switches are continuously monitored. For a
switch to be determined as inoperable or OUT OF SERVICE, up to twenty games or so must be played for a
switch to be automatically marked as OUT OF SERVICE. In programming, if a switch is determined to be faulty,
game play is compensated. Switches noted as OUT OF SERVICE are determined to be stuck closed or open
depending on switch usage. Free up the switch actuator, adjust or replace, if necessary. Performing a valid switch
closure will put the switch back "IN SERVICE."

Determination of switch usage can be checked in Audits (review Sec. 3, Chp. 3, GO TO AUDITS MENU). Find the
associated Audit with the switch in question and check usage; compare the numbers to commonly used switches.
After any switch is checked and repaired or replaced, it’s suggested to test the switch in the Switch Test or Single
6HF'LDJQRVWLFV

Coil Test (reviewed earlier in this chapter, Pages 14-15) where the associated coil to the switch can be tested as
well. After correcting the problem, the switch will marked "IN SERVICE" and the switch is again monitored as
specified above. Only you can determine if a switch marked OUT OF SERVICE is actually inoperable, or if it is
just not getting actuated during game play.

NOTE ON PINBALL DETECTION : While in TECHNICIAN

ALERTS MENU, if the following is displayed, the game has
detected one (1) or more pinball(s) missing and has
compensated for the lost pinball(s) to provide normal game play.

During game play, a pinball can get trapped or stuck. If after approximately 15 seconds of inactivity or "no
scoring," Ball Search is started. Note: If the pinball is in the Plunger Lane or "held" on the flipper, no Ball
Search will be performed. The game will perform one Ball Search in an attempt to "find" or free-up the pinball.

If the game does not see a switch closure (indicating the pinball has not been found), the Dot Matrix Display may
indicate [ LOCATING PINBALLS PLEASE WAIT ... ], during which Ball Search will continue until the timer runs
out (this feature will not happen if the game is in Competition Mode; Ball Search will continue until the pinball is
found, unstuck and/or replaced manually). The display will momentarily acknowledge the missing pinball(s). The
game will provide another pinball into play and will compensate for the lost pinball. Game play will appear normal.

Note: This detection and compensation will happen with every pinball, if each suffers the same fate of a ball trap.
If all balls get trapped, the game cannot be played or started until the situation is rectified.
Important: Determine where the pinball is! Do not add pinball(s) until it is determined the pinball(s) are indeed
missing and not just stuck. The most common places for a pinball to be stuck is in device holes (ejects and VUKs)
or ball troughs. Determine that all devices are functionally properly. Check around plastic pieces and ramps to
see if the pinball got jammed or stuck.

When the found pinball or a replacement pinball is added to the Ball Trough, the Technican Alert will immediately
clear and will then indicate any remaining alerts (if present) or NO TECHNICIAN ALERTS.

Enter the BALL TROUGH TEST (review the previous page) to cycle the pinballs and to check proper switch and
coil operation. If a pinball was added, and the originally stuck pinball has freed itself at a later time, the game will
not operate correctly.
NOTE ON DEVICE MALFUNCTION : While in TECHNICIAN
ALERTS MENU, if the following is displayed, the game has
detected a "device malfunction." Check the device indicated
(coil and/or switch).

6HFWLRQ&KDSWHU *R7R
3DJH 'LDJQRVWLFV0HQX
 . QR F NHU 7HV W
To initiate, from the DIAGNOSTICS MENU, select the "KNO- CKER" Icon. The digitally mastered
"Knocker" is sounded. The knocker sound is used to alert the player if he/she has received a special,
replay or a credit from the Match Award feature. Press the Black [ SELECT ] Button to activate the
knocker. To return to the DIAGNOSTICS MENU, press the Green [ BACK ] Button.
FACTOID: The knocker got it’s name from the ’original knocker’ (20th century pinball games), which
used a coil and when energized (fired), the plunger would strike a wood panel inside the cabinet.

6RXQG6SHDNHU7HVW
To initiate, from the DIAGNOSTICS MENU, select the
"SPKR" Icon. This system produces true digital stereo
sound from Backbox & Cabinet Speakers or "Mono" on
the Cabinet Speaker (when used by itself). This Menu is
provided to allow the technician a simple method of testing the
speakers if rewired or replaced.

Upon entering Sound / Speaker Test, you will notice the Dot
Matrix Display indicating the first option of available music and/or
sound(s) in this test. Press the Red [ + / > ] Button to cycle
through the available music and/or sounds, and press the Black
[ SELECT ] Button to play the option shown in the Dot Matrix Display. Press the Green [ BACK ] Button to exit.

6SH DNHU3K DVH 7H VWLQJ

Connections to each of speakers are polarized
and each must be connected appropriately for

6HF'LDJQRVWLFV
the best quality sound. If one speaker has the
positive and negative connections reversed
with respect to the other one, bass frequencies
will not be produced properly and the overall
sound quality will be poor. To test for proper
speaker phasing, use the Sound / Speaker
Test to cycle through the available music and
sound. If the sound is not balanced or doesn’t
sound correct, check the speaker wiring.

1. Check each speaker for polarity markings. If the speakers have polarity markings, verify that the Backbox
Speaker’s RED-BLK Wires and the Cabinet Speaker YEL-BLK Wire(s) are connected to the negative (–) terminal.

2. Disconnect the speaker output Connector J10 (AUDIO) from the CPU / Sound PCB (in the Backbox) and
connect a 1.5-volt battery across each speaker pair one at a time while observing the speakers.

3. Make sure the positive (+) battery terminal is connected to the positive lead [ J10, Pin-2, CH A+ ] (RED-WHT)
or [ J10, Pin-4, CH B+ ] (YEL-WHT) each time. As the connection is made, check speaker cone movement;
proper connections are indicated by outward movement.

%HJLQ%X UQ,Q
To initiate, from the DIAGNOSTICS MENU, select the "BURN" Icon. After selecting this Icon, press the
Black [ SELECT ] Button to begin (initiate) the Burn-In Test. Ensure the Power Interlock Switch is
pulled out if testing with the Coin Door open (required for coil function). Upon entering Burn-In Test, the
game will exercise all CPU I/O Functions: Dot Matrix Display Test, Coil Cycling Testing, All Lamps Test and
Sound / Speaker Test. Press the Green [ BACK ] Button, to pause and to view the cumulative Burn-In minutes.
Press the Green [ BACK ] Button again to return to the DIAGNOSTICS MENU.

Note: To reset Burn-In minutes back to 0:00, see Section 3, Chapter 5, GO TO RESET MENU (via the UTILITIES
MENU), Reset Factory Settings. CAUTION: Performing a FACTORY RESET will reset all other information
as well (read Section 3, Chapter 5, GO TO UTILITIES MENU, for more information).

*R7R 6HFWLRQ&KDSWHU
'LDJQRVWLFV0HQX 3DJH
 'RW0DWUL[7HVW
To initiate, from the DIAGNOSTICS MENU, select the "DOT TEST" Icon. After selecting this Icon the Dot
Matrix Test immediately begins. The Dot Matrix Display will immediately and continuously illuminate and
cycle each of the 5 Tests for 1 pass each. To return to the DIAGNOSTICS MENU, press the Green
[ BACK ] Button.

7HVW 7HVW
D

Illuminates 1 vertical column of dots,

turning it off & illuminating the next column, Illuminates 1 horizontal row of dots, turning it off &
until each column has been individually lit, illuminating the next row, until each row has been
while the other columns are off. individually lit, while the other rows are off.

7HVW 7HVW
Illuminates all the dots,
Illuminates all the dots, except for one row
except for one column from top to bottom.
from left to right.

7HVW 7HVW
Illuminates 1 vertical column of dots,
turning it off & illuminating the next column,
until each column has been individually lit,
6HF'LDJQRVWLFV

while the other columns are off.

Illuminates all the dots alternating even & odd,

in both the rows and columns.

7LFNHW'LVSHQVHU7HVW
To initiate, from the DIAGNOSTICS MENU, select the "TIX" Icon. This Menu (Icon) will only appear if
Standard Adjustment 56, Ticket Dispenser, is set to YES (Default = NO*). *Note: Some games
shipped from the factory with a unique Dip Switch Setting will default to YES). To view and/or change
your setting, see Section 3, Chapter 4, GO TO ADJUSTMENTS MENU. Please remember, if you install an
optional Ticket Dispenser, and your default setting is "NO," you will have to reset it back to "YES" if a Factory
Reset is performed.

After selecting this Icon, the Ticket Dispenser Test will start. With the Ticket Dispenser properly installed,
manually feed your tickets into the dispenser. The dispenser will activate and pull in the first ticket. Press the
Black [ SELECT ] Button (which energizes Coil #35, Aux 3: Switched Ground) to advance a ticket. Feeding your
Tickets into the dispenser works because Coil #33, Aux 1: Ticket Advance (Enable) is always ’energized’. With a
Ticket Meter installed, as one Ticket Passes through the Ticket Dispenser, one ’click’ is fired to the Meter (Coil
#34, Aux 2: Ticket Meter) for each ticket passing through. Dedicated Switch D-19, Ticket Notch, will also be
indicated on-screen (in combination with a audible sound) as "closing" as the notch between the tickets passes
through. In this test you can clear ticket jams and check and/or clear tickets in Escrow, if necessary. To return to
the DIAGNOSTICS MENU, press the Green [ BACK ] Button.

6HFWLRQ&KDSWHU *R7R
3DJH 'LDJQRVWLFV0HQX
6HFWLRQ  &K DS WHU    RI 

To initiate, from the MAIN MENU, select the "AUD" Icon. The AUDITS MENU provides 179* Audits for accounting
purposes and for evaluation of Game Programming. The Audits are divided into 4 groups: x Earnings Audits
[ #1 – #13 ], x Standard Audits [ #1 – #59 ], x Feature Audits (Programming Use Only) [ #1 – #107+ ] and
x Tournament Audits [ #1 – #14 ], "T AUD" Icon provided as an alternate access to Tournament Audits (*if data is
available). For more information on the TOURNAMENT MENU, review Section 3, Chapter 6, GO TO TOURNA-
MENT MENU). Try the "DUMP AUDITS TO USB" feature to create a text file of your audits. Don’t forget to set the
DATE & TIME in the UTILITIES MENU. See Section 3, Chapter 5, GO TO UTILITIES MENU, for more information.

Audits which are named Proprietary are also for Future Expansion or Programming. Game code may get
upgraded during production; compare all Audits in the Dot Matrix Display with the manual and make any
corrections, as necessary. Audits are subject to change (with or without notice).

All AUDITS MENU Icons and there usages are explained throughout this chapter in the same order as seen in the

6HF*R7R$XGLWV
Dot Matrix Display. NOTE: Depending on Game Type, Version, selections made, Dip Switch settings, location
and/or areas, some Icons may appear non-functional or may not appear at all. Icons and/or functions, order and
operation are subject to change.

In displays where changes can be made or to perform a function, use the GREEN Button to go [ BACK ], exit or
escape, the RED Buttons to [ < / – ] MOVE BACK / LEFT / [ + / > ] MOVE FORWARD / RIGHT to view the next
audit in the group, and the BLACK Button to [ SELECT ] the sub-menus.

(D UQLQJV$X GLW V>² @

To initiate, from the AUDITS MENU, select the "EARN" Icon. The Dot Matrix Display will indicate the
audit number (in this group), audit name and the audit total or value. The current audit will remain on the
display until the next audit is viewed or when this sub-menu is exited.

#1 TOTAL PAID CREDITS [ 0 ] : Total number of Paid Credits.

#2 FREE GAME PERCENTAGE [ 0% ] : Percentage value is ’Total Free Plays’ (Standard Audit 15) divided by
’Total Plays’ (Standard Audit 16).
#3 AVERAGE BALL TIME [ 0:00 ] : In seconds, the average ball time is derived from the total play time divided
by Standard Audit 1, Total Balls Played.
#4 AVERAGE GAME TIME [ 0:00 ] : The average game time is expressed in minutes and seconds.
#5 COINS THROUGH LEFT SLOT [ 0 ] : Total ’Left Coin Slot’ Dedicated Switch (D-1) closures.
#6 COINS THROUGH RIGHT SLOT [ 0 ] : Total ’Right Coin Slot’ Dedicated Switch (D-3) closures.
#7 COINS THROUGH CENTER SLOT [ 0 ] : Total ’Center Coin Slot’ Dedicated Switch (D-2) closures.
#8 COINS THROUGH FOURTH SLOT [ 0 ] : Total ’4th Coin Slot’ Dedicated Switch (D-4) closures.
#9 COINS THROUGH FIFTH SLOT [ 0 ] : Total ’5th Coin Slot’ Dedicated Switch (D-5) closures.
#10 TOTAL COINS [ 0 ] : Total amount of coins registered through all the Coin Slots.
#11 TOTAL EARNINGS [ USD 0.00 ] : Total cash value accumulated since the last Factory Reset occurred
(reveiw Section 3, Chapter 5, GO TO RESET MENU (via the UTILITIES MENU), Reset Coin Audits).
#12 METER CLICKS [ 0 ] : Total number of money clicks accumulated.
Based on the country’s lowest coin denomination used for the game credit.
#13 SOFTWARE METER [ 0 ] : Continuing total of Meter Clicks.
This audit cannot be reset; the display shows the constant addition of Meter Clicks.

*R7R 6HFWLRQ&KDSWHU
$XGLWV0HQX 3DJH
 6W DQGDU G$X GLW V>²@
To initiate, from the AUDITS MENU, select the "S.P.I." Icon. The Dot Matrix Display will indicate the audit
number (in this group), audit name and the audit total or value. The current audit will remain on the
display until the next audit is viewed or when this sub-menu is exited.

#1 TOTAL BALLS PLAYED [ 0 ] : Total number of Regular and Extra Balls.

#2 TOTAL EXTRA BALLS [ 0 ] : Total number of Extra Balls awarded.
#3 EXTRA BALLS PERCENTAGE [ 0% ] : Percentage value is ’Total Extra Balls’ (Standard Audit 2) divided by
’Total Plays’ (Standard Audit 16).
#4 REPLAY 1 AWARDS [ 0 ] : Total Awards (Credits, Extra Balls or Scores) for Level 1.
#5 REPLAY 2 AWARDS [ 0 ] : Total Awards (Credits, Extra Balls or Scores) for Level 2.
#6 REPLAY 3 AWARDS [ 0 ] : Total Awards (Credits, Extra Balls or Scores) for Level 3.
#7 REPLAY 4 AWARDS [ 0 ] : Total Awards (Credits, Extra Balls or Scores) for Level 4.
#8 TOTAL REPLAYS [ 0 ] : Total Awards (Credits, Extra Balls or Scores) for exceeding Replay Score Levels.
#9 REPLAY PERCENTAGE [ 0% ] : Percentage value is ’Total Replays’ (Standard Audit 8) divided by ’Total
Plays’ (Standard Audit 16). The percentage reflects replay total awards for exceeding replay score levels.
#10 TOTAL SPECIALS [ 0 ] : Total Awards (Credits, Extra Balls, or Scores) for making Specials.
#11 SPECIAL PERCENTAGE [ 0% ] : Percentage value is ’Total Specials’ (Standard Audit 10) divided by ’Total
Plays’ (Standard Audit 16).
#12 TOTAL MATCHES [ 0 ] : Total Credits awarded for matching the last two digits of the score with the System-
Generated Match Number at the end of the game. Percentage of Match Credits is adjustable from 0% to
10% or OFF by Standard Adjustment 19, Match Percentage, if enabled (review Section 3, Chapter 4, GO
TO ADJUSTMENTS MENU, Standard Adjustments).
6HF*R7R$XGLWV

#13 HIGH SCORE AWARDS [ 0 ] : Total Awards (Credits, Extra Balls, or Scores) for exceeding the
High-Score-To-Date scores.
#14 HIGH SCORE PERCENT [ 0% ] : Percentage value is ’High Score Awards’ (Standard Audit 13) divided by
’Total Plays’ (Standard Audit 16).
#15 TOTAL FREE PLAYS [ 0 ] : Total Free Credits for Replays, High-Score-To-Date, Specials and Match.
#16 TOTAL PLAYS [ 0 ] : This total is derived by adding the sum of ’Total Paid Credits’ (Earnings Audit 1) and
’Total Free Plays’ (Standard Audit 15). Note: Free credits are not recorded in the Audit until actually used.
#17 0.0M–1.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
0 and 1,999,990 points.
#18 2.0M–3.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
2,000,000 and 3,999,990 points.
#19 4.0M–5.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
4,000,000 and 5,999,990 points.
#20 6.0M–7.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
6,000,000 and 7,999,990 points.
#21 8.0M–9.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
8,000,000 and 9,999,990 points.
#22 10.0M–12.49M SCORES [ 00 ] : Total number of games the Player’s final score was between
10,000,000 and 12,499,990 points.
#23 12.5M–14.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
12,500,000 and 14,499,990 points.
#24 15.0M–17.49M SCORES [ 00 ] : Total number of games the Player’s final score was between
15,000,000 and 17,499,990 points.
#25 17.50M–19.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
17,500,000 and 19,999,990 points.
#26 20.0M–24.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
20,000,000 and 24,999,990 points.
#27 25.0M–29.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
25,000,000 and 29,999,990 points.
Standard Audits 28-59 continued on the next page.

6HFWLRQ&KDSWHU *R7R
3DJH $XGLWV0HQX
 6WDQGDUG$XGLWV&RQWLQXHG

#28 30.0M–39.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
30,000,000 and 39,999,990 points.
#29 40.0M–49.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
40,000,000 and 49,999,990 points.
#30 50.0M–74.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
50,000,000 and 74,999,990 points.
#31 75.0M–99.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
75,000,000 and 99,999,990 points.
#32 100.0M–149.99M SCORES [ 00 ] : Total number of games the Player’s final score was between
100,000,000 and 149,999,990 points.
#33 150.0+M SCORES: Total number of games the Player’s final score was 150,000,000 points and over.
#34 AVERAGE SCORES [ 00 ] : This total is derived by adding the Final Score of each game to a table and
dividing this sum by ’Total Plays’ (Standard Audit 16).
#35 SERVICE CREDITS [ 0 ] : Total ’Green [ SERVICE CREDIT ] Button’ Dedicated Switch (D-21) closures in
Attract Mode (not while in the SERVICE MENU). See Section 3, Chapter 1, Service Switch X4 Set
Access & Use, for how to receive Service Credits. See Section 3, Chapter 5, GO TO RESET MENU
(via GO TO UTILITIES MENU), Reset Credits, for how to delete credits.
#36 BALL SEARCH STARTED [ 0 ] : Total number of times the game performed a Ball Search.
#37 LOST BALL FEEDS [ 0 ] : Total number of times the game added a pinball to play when it could not find a
pinball after Ball Search (review Section 3, Chapter 2, GO TO DIAGNOSTICS MENU, Technicians
Alert [ Pinball Detection ]).

6HF*R7R$XGLWV
#38 LOST BALL GAME STARTS [ 0 ] : Total number of times the game started with a pinball missing from the
ball trough at the start of a game (review Section 3, Chapter 2, GO TO DIAGNOSTICS MENU,
Technicians Alert [ Pinball Detection ]).
#39 LEFT DRAINS [ 0 ] : Total ’Left Outlane’ Switch (24) closures.
#40 CENTER DRAINS [ 0 ] : Total number of times the pinball had drained when the last switch closed was not
the ’Left Outlane’ (24) or the ’Right Outlane’ Switch (29).
#41 RIGHT DRAINS [ 0 ] : Total ’RIght Outlane’ Switch (29) closures.
#42 TILTS [ 0 ] : Total ’Tilt Pendulum’ Dedicated Switch (D-17) closures.
#43 TOTAL BALLS SAVED [ 0 ] : Total number of times this feature was used. This feature is adjustable from
0:01–0:15, AUTO or NO BALL SAVES (review Section 3, Chapter 4, GO TO ADJUSTMENTS MENU,
Standard Adjustment 48, Ball Save Time). This feature is enabled at the start of each pinball and is
disabled as soon as a predetermined number of switches are "closed" or the allocated time has expired.
#44 LEFT FLIPPER USED [ 0 ] : Total ’Left Flipper Button’ Dedicated Switch (D-9) closures in Game Mode.
#45 RIGHT FLIPPER USED [ 0 ] : Total ’Right Flipper Button’ Dedicated Switch (D-11) closures in Game Mode.
#46 0 - 1 MINUTE GAMES [ 0 ] : Total games in which the total game time was between 0:00 and 1:00 minute.
#47 1 – 1.5 MINUTE GAMES [ 0 ] : Total games where play time was between 1:00 and 1:30 minutes.
#48 1.5 – 2 MINUTE GAMES [ 0 ] : Total games where play time was between 1:30 and 2:00 minutes.
#49 2 – 2.5 MINUTE GAMES [ 0 ] : Total games where play time was between 2:00 and 2:30 minutes.
#50 2.5 – 3 MINUTE GAMES [ 0 ] : Total games where play time was between 2:30 and 3:00 minutes.
#51 3 – 3.5 MINUTE GAMES [ 0 ] : Total games where play time was between 3:00 and 3:30 minutes.
#52 3.5 – 4 MINUTE GAMES [ 0 ] : Total games where play time was between 3:30 and 4:00 minutes.
#53 4 – 5 MINUTE GAMES [ 0 ] : Total games where play time was between 4:00 and 5:00 minutes.
#54 5 – 6 MINUTE GAMES [ 0 ] : Total games where play time was between 5:00 and 6:00 minutes.
#55 6 – 8 MINUTE GAMES [ 0 ] : Total games where play time was between 6:00 and 8:00 minutes.
#56 8 – 10 MINUTE GAMES [ 0 ] : Total games where play time was between 8:00 and 10:00 minutes.
#57 10 – 15 MINUTE GAMES [ 0 ] : Total games where play time was between 10:00 and 15:00 minutes.
#58 15+ MINUTE GAMES [ 0 ] : Total games in which the total game time was 15:00 minutes and over.
#59 RECENT REPLAY PERCENT [ 0% ] : Percent figured with programming thresholds for a determined
number of games. The % reflects replay total awards for exceeding replay score levels.

*R7R 6HFWLRQ&KDSWHU
$XGLWV0HQX 3DJH
 )HD WX UH$XGL WV>²  @
To initiate, from the AUDITS MENU, select the "INDY" Icon. The Dot Matrix Display will indicate the audit
number (in this group), audit name and the audit total or value. The current audit will remain on the
display until the next audit is viewed or when this sub-menu is exited.
Feature Audits Definition: Programming Use Only. The proprietary information Total number of times a feature was started, awarded, lit, played and/or
completed (awarded); also, the total number of Switch Closures during certain modes or features are tracked (a predetermined single/multiple variations of switch
closures are used to determine the lighting and/or completion of the feature stated). SEE THE DOT MATRIX DISPLAY FOR CURRENT FEATURE AUDITS.

)($785($8',76>²@6IRUXSGDWHVLIDQ\VHHGRWGLVSOD\ 6
1U )($785( $8',7 <285 1U )($785( $8',7 <285 1U )($785( $8',7 <285 1U )($785( $8',7 <285
1$0( 5(68/7 1$0( 5(68/7 1$0( 5(68/7 1$0( 5(68/7
LEFT 2ND INDY SCOR- RAIDERS MOVIE 4 CRUSADE MOVIE 5
1 OUTLANE 28 ING START 55 STARTED 82 COMPLETED
RIGHT 2ND INDY SCOR- RAIDERS MOVIE 4 SKILL SHOT
2 OUTLANE 29 ING AWARDS 56 JACKPOTS 83 STARTS
LEFT 2ND INDY SCOR- RAIDERS MOVIE 4 SKILL SHOT
3 RETURN LANE 30 ING COMPLETED 57 SUPER JACKPOTS 84 INDY JONES
RIGHT 3+ INDY SCORING RAIDERS MOVIE 4 SKILL SHOT CAI-
4 RETURN LANE 31 STARTS 58 COMPLETED 85 RO SWORDSMAN
INDY 3+ INDY SCORING RAIDERS MOVIE 5 SKILL SHOT
5 TARGETS 32 AWARDS 59 STARTED 86 LIGHT MYSTERY
JONES 3+ INDY SCORING RAIDERS MOVIE 5 SKILL SHOT
6 TARGETS 33 COMPLETED 60 JACKPOTS 87 SUPER POPS
INDY JONES JONES SCORING RAIDERS MOVIE 5 SKILL SHOT
7 TARGETS 34 STARTED 61 SUPER JACKPOTS 88 NEXT SCENE
GRAIL JONES SCORING RAIDERS MOVIE 5 MAP LETTERS
8 EJECT 35 AWARDS 62 COMPLETED 89 COMPLETED
GRAIL EJECT JONES SCORING TEMPLE MOVIE 1 MAP LETTERS
9 VIA POPS 36 COMPLETED 63 STARTED 90 PROGRESSED
LEFT 2ND JONES SCOR- TEMPLE MOVIE 1 MAP LETTERS
10 ORBIT 37 ING START 64 COMPLETED 91 ALREADY LIT
LEFT 2ND JONES SCOR- TEMPLE MOVIE 2 MYSTERY
11 SPINNER 38 ING AWARDS 65 STARTED 92 COLLECTED
POP BUMPER 2ND JONES SCOR- TEMPLE MOVIE 2 MYSTERY-
6HF*R7R$XGLWV

12 HITS 39 ING COMPLETED 66 COMPLETED 93 BIG POINTS

TEMPLE 3+ JONES SCOR- TEMPLE MOVIE 3 MYSTERY-
13 CAPTIVE BALL 40 ING STARTS 67 STARTED 94 LITTLE POINTS
TEMPLE 3+ JONES SCOR- TEMPLE MOVIE 3 MYSTERY-
14 TROUGH 41 ING AWARDS 68 COMPLETED 95 LIGHT SPECIAL
CAIRO 3+ JONES SCOR- TEMPLE MOVIE 4 MYSTERY-
15 CAPTIVE BALL 42 ING COMPLETED 69 STARTED 96 LIGHT EX. BALL
MAP RAIDERS MOVIE 1 TEMPLE MOVIE 4 MYSTERY-
16 EJECT 43 STARTED 70 COMPLETED 97 HURRYUP 1
MAP LEFT RAIDERS MOVIE 1 TEMPLE MOVIE 5 MYSTERY-
17 SLINGSHOT 44 JACKPOTS 71 STARTED 98 HURRYUP 2
MAP RIGHT RAIDERS MOVIE 1 TEMPLE MOVIE 5 MYSTERY-
18 SLINGSHOT 45 SUPER JACKPOTS 72 COMPLETED 99 HURRYUP 3
MAP RAIDERS MOVIE 1 CRUSADE MOVIE 1 MYSTERY-
19 TARGETS 46 COMPLETED 73 STARTED 100 HURRYUP 4
GERMAN RAIDERS MOVIE 2 CRUSADE MOVIE 1 MYSTERY-
20 TARGETS 47 STARTED 74 COMPLETED 101 SWORDSMAN
# TIMES RAIDERS MOVIE 2 CRUSADE MOVIE 2 EXTRA
21 ARK HIT 48 JACKPOTS 75 STARTED 102 BALLS
RIGHT RAIDERS MOVIE 2 CRUSADE MOVIE 2 CAIRO SWORDS-
22 RAMP 49 SUPER JACKPOTS 76 COMPLETED 103 MAN STARTED
RIGHT RAIDERS MOVIE 2 CRUSADE MOVIE 3 CAIRO SWORDS-
23 ORBIT 50 COMPLETED 77 STARTED 104 MAN COMPLETED
RIGHT RAIDERS MOVIE 3 CRUSADE MOVIE 3 X MARKS THE SPOT
24 SPINNER 51 STARTED 78 COMPLETED 105 STARTED
INDY SCORING RAIDERS MOVIE 3 CRUSADE MOVIE 4 X MARKS THE
25 STARTED 52 JACKPOTS 79 STARTED 106 SPOT AUGMENTED
INDY SCORING RAIDERS MOVIE 3 CRUSADE MOVIE 4 X MARKS THE
26 AWARDS 53 SUPER JACKPOTS 80 COMPLETED 107 SPOT MAXED
INDY SCORING RAIDERS MOVIE 3 CRUSADE MOVIE 5
27 COMPLETED 54 COMPLETED 81 STARTED +
Note: Audits are subject to change (with or without notice).

7RXU QD PHQW $X GLW V>²@ VXEMHF WW R FKDQJH

"T AUD" Icon provided as an alternate access to Tournament Audits (if data is available). For more
information on the TOURNAMENT MENU, review Section 3, Chapter 6, GO TO TOURNAMENT MENU).

'X PS$XGL WV7R86% 0HPRU \ 6WL FN

To initiate, from the USB MENU, select the "DUMP" Icon. Follow the on-screen prompts to perform a
Data Dump (download). A dated text file will be created on your USB Memory Stick. Don’t forget to set
the DATE & TIME first. See Section 3, Chapter 5, GO TO UTILITIES MENU, for more information.

6HFWLRQ&KDSWHU *R7R
3DJH $XGLWV0HQX
6HFWLRQ  & KD SW H U    R I  

To initiate, from the MAIN MENU, select the "ADJ" Icon. The ADJUSTMENTS MENU provides 79+/– Adjustments
to vary Game Functions to customize for your particular needs. The Adjustments are divided into 2 groups:
x Standard Adjustments [ #1 – #63 ] and x Feature Adjustments (Programming Use Only) [ #1 – #16+ ].
For quick and easy customization of Game Play Difficulty or Game Play Type or how to RESET ONLY the
Adjustments, review Section 3, Chapter 5, GO TO INSTALLS MENU (via the UTILITIES MENU). Shortcut:
Enter Custom Message (Standard Adj. 41) and Set Custom Pricing (via Standard Adjustment 18, Game
Pricing) can be quickly accessed via the UTILITIES MENU, see Section 3, Chapter 5, GO TO UTILITIES MENU.

Adjustments which are named Proprietary are also for Future Expansion or Programming. Game code may
get upgraded during production; compare all Adjustments in the Dot Matrix Display with the manual and make any
corrections, as necessary. Adjustments are subject to change (with or without notice).

All ADJUSTMENTS MENU Icons and there usages are explained throughout this chapter in the same order as

6HF*R7R$GMXVW
seen in the Dot Matrix Display. NOTE: Depending on Game Type, Version, selections made, Dip Switch settings,
location and/or areas, some Adjustments may appear non-functional or may not appear at all. Adjustments
and/or functions, order and operation are subject to change. If in doubt use the Factory Default Settings.

In displays where changes can be made or to perform a function, use the GREEN Button to go [ BACK ], exit or
escape, the RED Buttons to [ < / – ] SELECT PREVIOUS [ + / > ] SELECT NEXT when the adjustment name or
setting is flashing and the BLACK Button to [ SELECT ] toggle between the ADJUSTMENT and SETTING.

6W DQGDU G$GMXVW PHQW V>² @

To initiate, from the ADJUSTMENTS MENU, select the "S.P.I." Icon. The Dot Matrix Display will indicate
the adjustment number (in this group), adjust. name, adjust. setting and comment line. The current
adjustment will remain on the display until the next adjustment is viewed or when this sub-menu is exited.

#1 REPLAY TYPE: Set to AUTO, NONE, FIXED or DYNAMIC. Factory Default = AUTO. AUTO & DYNAMIC
are based on the Replay Percentage (Standard Adjustment 2). x Select FIXED to give the player a
Replay Award (Standard Adjustment 3) as the Replay Levels (Standard Adjustments 7-10) are
reached. The Replay Level(s) (Standard Adjustments 7-10) will not adjust up or down. x Select AUTO
to give the player a Replay Award (Standard Adjustment 3) as the Auto Replay Start (Standard
Adjustment 5) score level is reached. This score threshold will automatically adjust up or down based on
the Replay Percentage chosen (Standard Adjustment 2). The game periodically adjusts based upon
the Player Base Skill Level. x Select DYNAMIC to give the player a Replay Award (Standard
Adjustment 3) as the Dynamic Replay Start (Standard Adjustment 6) score level is reached. This score
threshold will go down every game based on the Replay Percentage (Standard Adjustment 2) selected.
x Select NONE to turn off Standard Adjustments 2-11.
#2 REPLAY PERCENTAGE: Set between 1% – 50%. Factory Default = 10%. Adjustable only if AUTO or
DYNAMIC is installed in Replay Type, Standard Adjustment 1. For [ DYNAMIC ] example, if the score
threshold is 50,000,00 and the Replay Percentage selected is 10%, every game a player does not
reach the score threshold, the score to reach will drop by 5,000,000 (10% of 50M). This will continue
every game until the threshold score is reached. Thus, if the score then drops to 15,000,000 after 7
games and is then achieved, the Replay Award (Standard Adjustment 3) is given. The original score
threshold is added to 15,000,000 and is now 65,000,000. It will then take the same player 10 games to
reach 15,000,000. This adjustment is shown only if AUTO or DYNAMIC is installed in Replay Type
(Standard Adjustment 1).
Standard Adjustments 3-18 continued on the next page.

*R7R$GMXVW 6HFWLRQ&KDSWHU
PHQWV0HQX 3DJH
 6WDQGDUG$GMXVWPHQWV FRQWLQXHG

#3 REPLAY AWARD: Set to CREDIT, TICKET*, TOKEN* or EXTRA BALL. Factory Default = CREDIT. Set the
type of award to be given to the player when the appropriate Replay Score threshold or level is acheived.
If awarding a CREDIT, TICKET or TOKEN is prohibited in your area, select EXTRA BALL. This adjustment
is not shown if NONE is installed in Replay Type (Standard Adjustment 1).
*Note: If TICKET or TOKEN is selected, the game will require an optional Ticket or Token Dispenser and then Q24 Option (Standard Adj. 55) must be changed accordingly.
#4 REPLAY LEVELS: Set between 1 – 4 for the number of Replay Levels to be active. Factory Default = 1.
This adjustment is not shown if NONE is installed in Replay Type (Standard Adjustment 1).
#5 AUTO REPLAY START: Set between 5,000,000 – 150,000,000 (increments of 1,000,000) for the Auto
Replay Start threshold. Factory Default = __,000,000. This adjustment is shown only if AUTO is
installed in Replay Type (Standard Adjustment 1).
#6 DYNAMIC REPLAY START: Set between 5,000,000 – 150,000,000 (increments of 1,000,000) for the
Dynamic Replay Start threshold. Factory Default = __,000,000. This adjustment is shown only if
DYNAMIC is installed in Replay Type (Standard Adjustment 1).
#7 REPLAY LEVEL #1: Set between 5,000,000 – 150,000,000 (increments of 1,000,000). Factory Default =
__,000,000. Set the first or only Replay Level. This adjustment is shown only if FIXED is installed in
Replay Type (Standard Adjustment 1).
#8 REPLAY LEVEL #2: Set between 5,000,000 – 150,000,000 (increments of 1,000,000). Factory Default =
__,000,000. Set the second Replay Level. This adjustment is shown only if FIXED is installed in Replay
Type (Standard Adjustment 1) and 2 is intalled in Replay Levels (Standard Adjustment 4).
#9 REPLAY LEVEL #3: Set between 5,000,000 – 150,000,000 (increments of 1,000,000). Factory Default =
__,000,000. Set the third Replay Level. This adjustment is shown only if FIXED is installed in Replay
Type (Standard Adjustment 1) and 3 is intalled in Replay Levels (Standard Adjustment 4).
6HF*R7R$GMXVW

#10 REPLAY LEVEL #4: Set between 5,000,000 – 150,000,000 (increments of 1,000,000). Factory Default =
__,000,000. Set the fourth Replay Level. This adjustment is shown only if FIXED is installed in Replay
Type (Standard Adjustment 1) and 4 is intalled in Replay Levels (Standard Adjustment 4).
#11 REPLAY BOOST: Set to YES or NO. Factory Default = YES. When set to YES, while FIXED or AUTO
maintains the Replay Levels, Replay Boost works as follows: If the Replay Level is 7,000,000
(regardless of the Replay Percentage), and the Player scores 20M, and receives the Replay Award, the
next game the Current Replay Level is added to this base. Thus the next game, the Replay Level is
14,000,000. The Player agains scores 20M. The next game the Player will need to achieve 21,000,000
to earn the Replay Award. If the Player does not achieve 21,000,000, the next game reverts back to the
original 7,000,000 or the new adjusted level maintained by the Fixed or Autopercentaging Feature. This
adjustment is shown only if AUTO or FIXED is installed in Replay Type (Standard Adjustment 1).
#12 SPECIAL LIMIT: Set between 1 – 5, UNLIMITED or NO SPECIALS. Factory Default = 1. Set the maximum
number of Specials that may be accumulated per game.
#13 SPECIAL PERCENTAGE: Set between 1% – 50%. Factory Default = 10%. This adjustment allows the
operator to adjust how frequently the Special Feature is made available to the player. This adjustment
is not shown if NO SPECIALS is installed in Special Limit (Standard Adjustment 12).
#14 SPECIAL AWARD: Set to CREDIT, TICKET*, TOKEN*, POINTS or EXTRA BALL. Factory Default =
CREDIT. Select EX. BALL or POINTS if awarding a CREDIT or TICKET / TOKEN is prohibited in your area.
This adjustment is not shown if NO SPECIALS is installed in Special Limit (Standard Adjustment 12).
*Note: If TICKET or TOKEN is selected, the game will require an optional Ticket or Token Dispenser and then Q24 Option (Standard Adj. 55) must be changed accordingly.
#15 FREE GAME LIMIT: Set between 1 – 9, UNLIMITED or NO FREE GAMES. Factory Default = 5. Set the
maximum number of Free Games that may be accumulated per game.
#16 EXTRA BALL LIMIT: Set between 1 – 9, UNLIMITED or NO EXTRA BALLS. Factory Default = 5. Set the
number of Extra Balls that may be accumulated per game.
#17 EXTRA BALL PERCENTAGE: Set between 1% – 50%. Factory Default = 25%. This adjustment allows the
operator to adjust how frequently the Extra Ball Feature is made available to the player. This
adjustment is not shown if NO EXTRA BALLS is installed in Extra Ball Limit (Standard Adjustment 16).
#18 GAME PRICING: There are two (2) methods available for Coin Switch Programming: Standard & Custom.
Set between AUSTRALIA 1 – UK 6 or CUSTOM. Factory Default = USA 10. Shortcut: Set Custom
Pricing and instructions, review Section 3, Chapter 5, GO TO UTILITIES MENU, Set Custom Pricing.
The appropriate Dip Switch Setting (Dip Sw. 1-8 location CPU/Sound PCB SW1) in relationship to the
Pricing Scheme selected is important (view the tables on the following pages for more information).
Standard Adjustment 18, Game Pricing, continued on the next page.

6HFWLRQ&KDSWHU *R7R$GMXVW
3DJH PHQWV0HQX
 6WDQGDUG$GMX VWPHQW*DPH 3ULFLQJF RQWLQX HG
86$ ,QWHUQDWLRQDO QRQ(XUR 6WDQGDUG3ULFLQJ6HOHFW7DEOH
CPU/SOUND PCB COUNTRY COIN MECHANISMS (SWITCHES) PRICING SCHEME Requires SPI
DIP SWITCH SW1 SETTING COINS THRU ... SLOT: Number of Plays (Credits) for Price Amount Shown Coin Card(s)
SETTING OPTION(S) LEFT CENTER RIGHT 4TH See "Appendix J" for Coin Cards Examples & Info! Part Number
Pos.         Default Highlighted USD // UNITED STATES DOLLAR // [ $ ]
ON USA 1 1/0.25 755-5400-01-Y
OFF 99999999 USA 2 1/0.50 2/0.75 3/1.00 755-5400-09-Y
USA 3 1/0.50 For USA 6 and USA 7 use: 755-5400-02-Y 755-5400-02-Y
USA 6 Note: If player uses X4 25¢ quarters =
HIGHLIGHTED USA 4 1/0.50 2 plays. However, $1 bill = 3 plays! 755-5400-02-Y
= Factory Default USA 5    1/0.50 2/1.00 3/1.50 5/2.00 755-5400-08-Y
HIGHLIGHTED USA 6 1/0.50 2 /’4 X 25¢’ 3 /$ 1.00 Bill 9 Used to promote
the Bill Validator.

= Not Shown on Coin USA 7 1/0.50 2/1.00 4/1.50 6/2.00

Card USA 8 1/0.50 3/1.00 755-5400-00-Y
USA 9 1/1.00 755-5400-07-Y
USA 10 1/0.75 2/1.50 3/2.00 755-5400-11-Y
        AUD // AUSTRALIAN DOLLARS // [ $AUS ]
8 88
Pos. Default Highlighted

AUSTRALIA 1 1/1.00 3/2.00 755-5406-00-Y

9 9 9 9 AUSTRALIA 2   
ON
OFF 9 1/1.00 (1 Side)
        CAD // CANADIAN DOLLARS // [ $CAN ]
88
Pos. Default Highlighted

CANADA 1 755-5400-00-Y
      
ON
OFF 9 9 9 9 9 9 [ 25¢ door ] -01-Y or -02-Y
8 88 CANADA 2 755-5400-10-Y
9 9 9 [ dollar door ]    
ON
OFF 9 9
        HRK // CROATIAN KUNA // [ kuna ]
88 8
Pos. Default Highlighted
755-5410-00-Y
    
ON
OFF 9 9 9 9 9 CROATIA (2-Sided)
        DKK // DANISH KRONER // [ Kr ]
8 8
Pos. Default Highlighted

DENMARK 1 1/3 2/5 755-5402-00-Y

   
ON
9 9 9 9 9 9 DENMARK 2

6HF*R7R$GMXVW
OFF 1/2 2/4 3/5 4/7 5/9 7/10 (2-Sided)
        JPY // JAPANESE YEN // [ ¥ ]
8 8 8
Pos. Default Highlighted

JAPAN 1 1/100 755-5408-01-Y

 
ON
OFF 9 9 9 9 9 JAPAN 2 1/100 3/200 (2-Sided)
        LTL // LITHUANIA LITAI // [ Lt ]
88 88
Pos. Default Highlighted
755-5416-00-Y
   
ON
OFF 9 9 9 9 LITHUANIA (1 Side)
        TOKEN // Middle East currency used to buy token // [ TOKEN ]
888 8
Pos. Default Highlighted
755-5416-00-Y
9 9 9 9 MIDDLE EAST WRNHQ WRNHQ 
ON
OFF (use Side 1)
        NZD // NEW ZEALAND DOLLAR // [ $NZD ]
8
Pos. Default Highlighted

1/1 755-5406-00-Y
NEW ZEALAND 1
 
ON
OFF 9 9 9 9 9 9 9 NEW ZEALAND 2 1/1 3/2 (Side 2)
        NOK // NORWEGIAN KRONE // [ Kr ]
8 8
Pos. Default Highlighted
ON NORWAY 1 1/10 755-5403-01-Y or
OFF 9 9 9 9 9 9 NORWAY 2    1/10 3/20 -02-Y / (2-Sided)
NORWAY 3 1/20 755-5403-03-Y
NORWAY 4 1/20 3/40 (2-Sided)
        6 LEFT SWITCH CAN BE WIRED TO BILL ACCEPTOR 6 RUB // RUSSIAN RUBLE // [ Ruble ]
8 88
Pos. Default Highlighted
755-5411-00-Y
   
ON
OFF 99 9 9 9 RUSSIA (2-Sided)
        ZAR // SOUTH AFRICAN RAND // [ R ]
8 8
Pos. Default Highlighted

SO. AFRICA 1 1/2.00 755-5409-01-Y

   
ON
OFF 9 9 9 9 9 9 SO. AFRICA 2 1/3.00 2/5.00 (2-Sided)
        SEK // SWEDISH KRONOR // [ kr ]
88 8
Pos. Default Highlighted

SWEDEN 1 1/10 2/15 3/20 755-5404-00-Y

  
ON
OFF 9 9 9 9 9 SWEDEN 2 1/5 (2-Sided)
        CHF // SWISS FRANCS // [ Sg ]
88
Pos. Default Highlighted

SWITZERLAND 1 1/1 2/2 3/3 4/4 6/5 755-5405-00-Y

  
ON
OFF 99 9 9 9 9 SWITZERLAND 2 1/1 3/2 5/3 7/4 9/5 (2-Sided)
        TWD // TAIWANESE DOLLAR // [ TWD ]
88
Pos. Default Highlighted
755-5412-00-Y
  
ON
OFF 999 9 9 9 TAIWAN (use Side 1)
        6 5TH COIN SLOT NOT AVAILABLE WITH CUSTOM PRICING 6 GPB // UNITED KINGDOM POUNDS // [ £ ]
888
Pos. Default Highlighted
ON UK 1 LEFT CENTER RIGHT 4TH 5TH 3/1.00 7/2.00 755-5407-00-Y
OFF 9 9999 UK 2 4/1.00 755-5407-01-Y*
ATTENTION: UK 5TH UK 3 1/0.50 2/1.00 3/1.50 5/2.00 755-5407-01
COIN SLOT TIED TO 6TH UK 4      1/0.30 2/0.60 3/0.90 4/1.00 755-5407-01-Y*
CHANNEL ON ELEC. UK 5 5
Coin Only
1/1.00 3/2.00 755-5407-01
COIN MECH UK 6 3/2.00 *use blank side 755-5407-01-Y*

HIGHLIGHTED = Factory Default HIGHLIGHTED = Not Shown on Coin Card

Standard Adjustment 18, Game Pricing, continued on the next page.

*R7R$GMXVW 6HFWLRQ&KDSWHU
PHQWV0HQX 3DJH
 6WDQGDUG$GMX VWPHQW*DPH 3ULFLQJF RQWLQX HG
(XUR6XPPDU\ ,QWHUQDWLRQDO (XUR 6WDQGDUG3ULFLQJ6HOHFW7DEOH
CPU/SOUND PCB COUNTRY COIN MECHANISMS (SWITCHES) PRICING SCHEME Requires SPI
DIP SWITCH SW1 SETTING COINS THRU ... SLOT: Number of Plays (Credits) for Price Amount Shown Coin Card(s)
SETTING OPTION(S) LEFT CENTER RIGHT 4TH See "Appendix J" for Coin Cards Examples & Info! Part Number
Pos.         Default Highlighted EUR // EUROPEAN UNION EUROS // [ L ]
ON S E E B E L O W Euro 1 1/0.50 755-5401-01-Y
OFF S E T T I N G S Euro 2 1/0.50 2/1.00 3/1.50 5/2.00 755-5401-02-Y
Euro 1-12 are alternate settings for Euro 3 1/0.50 3/1.00 755-5401-03-Y
countries using the Euro. 755-5401-04-Y
Euro 4 1/0.50 2/1.00 3/1.50 6/2.00
Euro 5 optional 1/0.50 3/1.00 4/1.50 7/2.00 755-5401-05-Y
HIGHLIGHTED 755-5401-06-Y
Euro 6 2/0.50
= Factory Default Euro 7     1/1.00 2/2.00 3/3.00 5/4.00 755-5401-07-Y
HIGHLIGHTED Euro 8 optional 1/1.00 3/2.00 755-5401-08-Y
Euro 9 1/1.00 2/1.50 3/2.00 755-5401-09-Y
= Not Shown on Coin
Card Euro 10 1/1.00 3/2.00 7/3.00 755-5401-10-Y
Euro 11 1/1.00 4/2.00 755-5401-11-Y
Euro 12 2/1.00 4/2.00 6/3.00 9/4.00 755-5401-12-Y
For a different Euro Pricing Scheme (other than Factory Default listed below), scroll through Standard Adjustment 18:
Euro 1-12 or CUSTOM* for new setting (reference above Euro 1-12 Summary). Keep the Country Dip Switch Setting the same as listed below.
        EUR // EUROPEAN UNION EUROS // [ L ]
8
Pos. Default Highlighted

AUSTRIA 755-5401-09-Y
     
ON
OFF 9999999 Euro 9
       
8
Pos. Default Highlighted

BELGIUM 755-5401-01-Y
   
ON
OFF 9 999999 Euro 1
       
8 8
Pos. Default Highlighted

FINLAND 755-5401-08-Y
    
ON
OFF 9 99999 Euro 8
       
6HF*R7R$GMXVW

88
Pos. Default Highlighted

FRANCE 755-5401-10-Y
     
ON
OFF 9 99999 Euro 10
       
888
Pos. Default Highlighted
ON GERMANY 1 1/0.50 755-5401-01-Y
OFF 99999 GERMANY 2    1/0.50 2/1.00 3/1.50 5/2.00 755-5401-02-Y
GERMANY 3 1/0.50 2/1.00 3/1.50 6/2.00 755-5401-04-Y
       
8888
Pos. Default Highlighted

GREECE 755-5401-08-Y
    
ON
OFF 9999 Euro 8
       
8
Pos. Default Highlighted

ITALY 1 1/0.50 755-5401-01-Y

 
ON
OFF 9 9 9 9 9 9 9 ITALY 2 1/1.00 3/2.00 755-5401-08-Y
       
8
Pos. Default Highlighted

NETHERLANDS 755-5401-03-Y
    
ON
OFF 9 9 9 9 9 9 9 Euro 3
       
8 8
Pos. Default Highlighted

PORTUGAL 755-5401-01-Y
  
ON
OFF 999 999 Euro 1
       
8 8
Pos. Default Highlighted

SPAIN 755-5401-08-Y
    
ON
OFF 9 99 999 Euro 8
HIGHLIGHTED = Factory Default HIGHLIGHTED = Not Shown on Coin Card
For the associated Coinage Card required if the Factory Default Setting was changed, view on-line at:
http://www.sternpinball.com/coinagecards.shtml
You can download and print the replacement card. Adobe® Reader 5.0 or higher required (links on site). Use Yellow Card Stock:
ASTROBRIGHTS® SOLAR YELLOW #65 FROM WAUSAU PAPER PRODUCTS (Stock #22731)

#19 MATCH PERCENTAGE: Set between 0% – 10% or OFF. Factory Default = 9%. At 0% the Match
Animation Feature occurs at the end of the game but never awards the Match Award (Standard
Adjustment 20). Set to OFF, no Match Animation Feature is shown.
#20 MATCH AWARD: Set to CREDIT, TICKET* or TOKEN*. Factory Default = CREDIT. This adjustment is
not shown if OFF is installed in Match Percentage (Standard Adjustment 19).
*Note: If TICKET or TOKEN is selected, the game will require an optional Ticket or Token Dispenser and then Q24 Option (Standard Adj. 55) must be changed accordingly.
#21 BALLS PER GAME: Set between 1 – 10. Factory Default = 3. Set the number of balls per game.
Standard Adjustments 22-36 continued on the next page.

6HFWLRQ&KDSWHU *R7R$GMXVW
3DJH PHQWV0HQX
 6WDQGDUG$GMXVWPHQWV FRQWLQXHG

#22 TILT WARNINGS: Set between 0 – 3. Factory Default = 2. Set the number of Plumb Bob Tilt Switch
closures before the ball in play is tilted. Each closure generates an audible alert and/or display alert.
#23 CREDIT LIMIT: Set between 4 – 50. Factory Default = 30. Set the maximum credits allowed.
#24 ALLOW HIGH SCORES: Set to YES or NO. Factory Default = YES. When set to YES, if a player exceeds
the Default Grand Champion or 1-4 High Scores, the player may receive a High Score Award (Standard
Adjustment 25) and enter their 3 Initials or 10-Letter Name (Standard Adjustment 36). Set to NO to
disable this feature. The following Standard Adjustments 25-37 are not shown if NO is installed.
#25 HIGH SCORE AWARD: Set to CREDIT, TICKET* or TOKEN*. Factory Default = CREDIT. Set the type of
award to be given to the player when the appropriate Grand Champion Score or High Score #1 – #4
threshold or level is acheived. If awarding a CREDIT, TICKET or TOKEN is prohibited in your area, install
NO in Allow High Scores (Standard Adjustment 24). This adjustment is not shown if NO is installed in
Allow High Scores (Standard Adjustment 24).
*Note: If TICKET or TOKEN is selected, the game will require an optional Ticket or Token Dispenser and then Q24 Option (Standard Adj. 55) must be changed accordingly.
#26 GRAND CHAMPION AWARDS: Set between 0 – 5. Factory Default = 1. Set the number of High Score
Award(s) (Std. Adj. 25), awarded for exceeding the Grand Champion Score (Standard Adjustment 31).
This adjustment is not shown if NO is installed in Allow High Scores (Standard Adjustment 24).
#27 HIGH SCORE #1 AWARDS: Set between 0 – 3. Factory Default = 1. Set the number of High Score
Award(s) (Std. Adj. 25), awarded for exceeding the High Score #1 (Standard Adjustment 32).
This adjustment is not shown if NO is installed in Allow High Scores (Standard Adjustment 24).
#28 HIGH SCORE #2 AWARDS: Set between 0 – 2. Factory Default = 0. Set the number of High Score
Award(s) (Std. Adj. 25), awarded for exceeding the High Score #2 (Standard Adjustment 33).
This adjustment is not shown if NO is installed in Allow High Scores (Standard Adjustment 24).

6HF*R7R$GMXVW
#29 HIGH SCORE #3 AWARDS: Set between 0 – 1. Factory Default = 0. Set the number of High Score
Award(s) (Std. Adj. 25), awarded for exceeding the High Score #3 (Standard Adjustment 34).
This adjustment is not shown if NO is installed in Allow High Scores (Standard Adjustment 24).
#30 HIGH SCORE #4 AWARDS: Set between 0 – 1. Factory Default = 0. Set the number of High Score
Award(s) (Std. Adj. 25), awarded for exceeding the High Score #4 (Standard Adjustment 35).
This adjustment is not shown if NO is installed in Allow High Scores (Standard Adjustment 24).
#31 GRAND CHAMPION SCORE: Set between 1,000,000 – 1,000,000,000 (increments of 1,000,000).
Factory Default = __,000,000. Set the desired Grand Champion Score level a player needs to exceed
to earn the High Score Award (Standard Adjustment 25). A score higher than the default, cannot be
reset by Standard Adjustment 37, HSTD Reset Count. The Grand Champion Score will revert to the
Factory Default Score ONLY if a Reset Grand Champion is performed in the RESET MENU (via the
UTILITIES MENU, see Section 3, Chapter 5) or if the game is without power for more than 12 hours after
the CPU/Sound PCB Coin Cell Battery is expired or removed. This adjustment is not shown if NO is
installed in Allow High Scores (Standard Adjustment 24).
#32 HIGH SCORE #1: Set between 1,000,000 – 1,000,000,000. Factory Default = __,000,000. Set the desired
High Score #1 level a player needs to exceed to earn the High Score Award (Standard Adjustment 25).
A score higher than the default, will be reset by Standard Adjustment 37, HSTD Reset Count. The High
Score will revert to the Factory Default Score ONLY if a Reset High Scores is performed in the RESET
MENU (via the UTILITIES MENU, see Section 3, Chapter 5) or if the game is without power for more
than 12 hours after the CPU/Sound PCB Coin Cell Battery is expired or removed. This adjustment is not
shown if NO is installed in Allow High Scores (Standard Adjustment 24).
#33 HIGH SCORE #2: Set between 1,000,000 – 1,000,000,000. Factory Default = __,000,000. Set the desired
High Score #2 level a player needs to exceed ... (continued in Standard Adjustment 32 definition above).
#34 HIGH SCORE #3: Set between 1,000,000 – 1,000,000,000. Factory Default = __,000,000. Set the desired
High Score #3 level a player needs to exceed ... (continued in Standard Adjustment 32 definition above).
#35 HIGH SCORE #4: Set between 1,000,000 – 1,000,000,000. Factory Default = __,000,000. Set the desired
High Score #4 level a player needs to exceed ... (continued in Standard Adjustment 32 definition above).
#36 HSTD (HIGH SCORE TO DATE) INITIALS: Set to 3 INITIALS or 10 LETTER NAME. Factory Default = 3
INITIALS. When set to 3 INITIALS, the player is allowed only 3 initials to input. When set to 10
LETTER NAME, the player is allowed to enter 10 initials to input. This adjustment is not shown if NO is
installed in Allow High Scores (Standard Adjustment 24).
Standard Adjustments 37-49 continued on the next page.

*R7R$GMXVW 6HFWLRQ&KDSWHU
PHQWV0HQX 3DJH
 6WDQGDUG$GMXVWPHQWV FRQWLQXHG

#37 HSTD (HIGH SCORE TO DATE) RESET COUNT: Set between 100 – 9900 or OFF (increments of 100).
Factory Default = 2000. Set the number of games between "automatic resets" of High Scores back to
the Factory Defaults for ONLY Standard Adj. 32 – 35, High Score #1 – #4. The High Score will revert to
the Factory Default Scores when the number of games stated is reached. Reset High Scores can be
performed in the RESET MENU (via the UTILITIES MENU, see Sec. 3, Chp. 5) anytime or if the game is
without power for more than 12 hours after the CPU/Sound PCB Coin Cell Battery is expired or removed.
This adjustment is not shown if NO is installed in Allow High Scores (Standard Adj. 24).
#38 FREE PLAY: Set to YES or NO. Factory Default = NO. When set to YES, no coins are required for Game
Play.
#39 LANGUAGE: Set to ENGLISH, GERMAN, FRENCH, SPANISH or ITALIAN. Factory Default = ENGLISH.
Set the language for the game. Language of game is also shown in the Dot Display (along with the
Game Title and code version) at the start-up routine which follows a game reset or power-up.
#40 PLAYER LANGUAGE SELECT: Set to YES or NO. Factory Default = YES. When set to YES, after the
player presses the Start Button (to start a game with adequate credit ), the player has the option to
choose a language by pressing either Flipper Button before game start (options of languages installed
are shown on the Dot Display). Note: If set to NO or if only one langauge is installed and the setting is
set to YES, the game will start immediately after the Start Button press. Language(s) available are
dependent on game destination from the factory. Other languages may be available on-line for
download and installed on your game. With the proper dip switch installed, the langauge option(s) can
be changed. For more information or help, call Technical Support at 800-542-5377 (708-345-7700).
#41 CUSTOM MESSAGE: Set to ON, CHANGE or OFF. Factory Default = ON. Shortcut: Enter Custom
Message and instructions, review Sec. 3, Chp. 5, GO TO UTILITIES MENU, Enter Custom Message.
6HF*R7R$GMXVW

#42 FLASH LAMP POWER: Set to NORMAL, OFF or DIM. Factory Default = NORMAL. When set to DIM, the
Flash Lamps impulse power is reduced by 25% and when set to OFF the Flash Lamps will not flash.
For Flash Lamps used in this game, Go To Flash Lamps Menu via the DIAGNOSTICS MENU (see
Section 3, Chapter 2, GO TO DIAGNOSTICS MENU, Page 15).
#43 COIL PULSE POWER: Set to NORMAL, HARD or SOFT. Factory Default = NORMAL. When set to
HARD, the coil pulse power is increased by 12.5% of the normal pulse rate. When set to SOFT the coil
pulse power is decreased by 12.5% of the normal pulse rate. This adjustment is provided to compen-
sate for Low Line or High Line voltage conditions where the solenoids (coils) appear to kicking too weak
or too hard. Adjust as required.
#44 KNOCKER VOLUME: Set to NORMAL, OFF or LOW. Factory Default = NORMAL. When set to LOW, the
volume is decreased 50%. When set to OFF, no sound is heard when the "knocker" is sounded. Test
the knocker sound in the Fire Knocker Test via the DIAGNOSTICS MENU (see Section 3, Chapter 2,
GO TO DIAGNOSTICS MENU, Page 19).
#45 GAME RESTART: Set to YES or NO. Factory Default = YES. When set to YES, a new game may be
started during any ball after the first ball is completed (if credits allow). Pressing the Start Button during
the first ball will add additional players (up to 4, if credits allow). When set to NO, the game disables the
Start Button after the first ball until the final ball is in play.
#46 BILL VALIDATOR: Set to YES or NO. Factory Default = NO. When set to YES, in Game Attract Mode an
"Insert Bill Animation" is shown in the display (or just the absense of the Coin Animation). When set to
NO, an "Insert Coin Animation" is shown. #46 Not yet implemented.
#47 MUSIC VOLUME: Set between 1 – 15. Factory Default = 1. After volume is set via Service Buttons this
adjustment can be utilized to adjust the background music (1 all the way on, 15 all the way off) while
keeping the Special Sound Effects at the same level.
#48 BALL SAVE TIME: Set between 0:01 – 0:15, AUTO or NO BALL SAVES. Factory Default = 0:05. When
set to NO BALL SAVES this feature is unavailable. Set between 0:01 through 0:15 (single increments)
for the ball to be sent back into play if the time set is not met (per ball). Set to AUTO to automatically
adjust the Ball Save Timer based on the average ball time.
#49 TIMED PLUNGER: Set to OFF or 0:01 – 1:00. Factory Default = OFF. The plunger will "Autoplunge" the
ball (at the time set) when the ball is at the beginning of play, waiting for the player.

Standard Adjustments 50-63 continued on the next page.

6HFWLRQ&KDSWHU *R7R$GMXVW
3DJH PHQWV0HQX
 6WDQGDUG$GMXVWPHQWV FRQWLQXHG

#50 FLIPPER BALL LAUNCH: Set to OFF, LEFT FLIPPER, RIGHT FLIPPER, EITHER FLIPPER or BOTH
FLIPPERS. Default is OFF. This feature allows the player to operate the Auto Ball Launch with the
Flipper Button(s) depending on which setting is chosen.
#51 COINDOOR BALL SAVER: Set to YES or NO. Factory Default = NO. When set to NO, this feature is not
available. When set to YES, this feature allows the Coin Door to be opened during game play; the ball
will drain but the game will be placed "on hold". When the Coin Door is closed, the pinball will return to
the Shooter Lane, and the game will resume. Useful at locations where technicians change the cash
box regularly at exact times of the day where players can be on the game.
#52 COMPETITION MODE: Set to YES or NO. Factory Default = NO. When set to NO, this feature is not
available. Set to YES, this feature will equalize random game features and global score values during
multi-player games by predetermined competition rules set by programming. If an Install Competition
was made via the INSTALLS MENU (which automatically changes this setting to YES), and this setting
was changed back to NO, the Competition Mode will be turned OFF (cancelled).
#53 CONSOLATION BALL: Set to YES or NO. Factory Default = YES. When set to YES, the EXTRA BALL
(lamp insert, location varies) will be lit on the last ball in play, if certain programming criteria is met.
#54 FAST BOOT: Set to YES or NO. Factory Default = YES. When set to NO or if you hold both Flipper
Buttons during Power-Up, this feature is not available and will display all normal Power-Up screens.
When set to YES, the game will not display the normal informative Power-Up screens, specifically the
CPU Version screen and the Location/Game ID screen. Regardless of the setting, normal Power-Up
safety checks are still performed. #54 Not yet implemented.
#55 Q24 OPTION: Set to COIN METER, TOKEN DISPENSER or KNOCKER. Factory Default = COIN METER.
This Coil (Solenoid) Location is left "open" at the Factory to allow for these optional Mechanisms to be

6HF*R7R$GMXVW
added to the game. If selecting TOKEN DISPENSER, Standard Adjustments 3, 14, 20 & 25 should be
changed to TOKEN. Call Tech. Support at 1-800-542-5377 if more information is required on this option.
#56 TICKET DISPENSER: Set to YES or NO. Factory Default = NO. This adjustment is required only for
games which have an optional Deltronics (DL-1275-2 PCB Style, SPI Part Nr. 515-7275-00) Ticket
Dispenser installed. Unique CPU Sound Bd. Dip Switch Setting required, changes the Default to YES.
#57 PLAYER COMPETITION: Set to YES or NO. Factory Default = YES. Competition Mode unrandomizes
feature events, and standardizes game play and rule sets (varies from game to game) for fair
competitions. With at least one credit posted, or with the game set for ’FREE PLAY’, during the
game-over Attract Mode, press the Left Flipper Button and hold it in for approximately one second.
The following message will appear on the display for approximately 10 seconds: ’COMPETITION MODE
READY ... PRESS START NOW’. If a game is started (either by pressing the ’START’ button for a
regular game, or by pressing the ’TOURNAMENT START’ button for a tournament game) while this
message appears on the display, then competition mode will be enabled for all players during the game.
General rules are covered in the Instruction Card. Other Hints and/or Rules can be made known on this
game either visually (the Dot Display or Flashing Light Inserts) or can be audible.
#58 NOT AVAILABLE THIS GAME / TEAM SCORES: Set to YES or NO. Factory Default = NO. Set to YES,
then Team Play will be made available. Team Play only works in a 4-Player Game. The totals for
Players 1 / 3 (Team 1) & Players 2 / 4 (Team 2) are then displayed individually as well as the combined
score for BOTH TEAMS to enable Team Play (Doubles). See Section 2, Chapter 1, Game Operation
& Features, for non-adjustable Features.
#59 LOCATION ID: Set between 0 to 9999. Factory Default = 0. This adjustment allows the operator to assign
a location identification number to the audit print-out sheet. (Will not be affected by a Factory Reset.)
#60 GAME ID: Set between 0 to 9999. Factory Default = 0. This adjustment allows the operator to assign a
game identification number to the audit print-out sheet. (Will not be affected by a Factory Reset.)
#61 TIME FORMAT: Set to 12-HOUR or 24-HOUR. Factory Default = 12-HOUR. This adjustments determines
how the time is displayed. Time used for Tournament and Data Dumps where a time stamp is required.
#62 COIN INPUT DELAY: Set between 30 to 60 or OFF. Factory Default = 30. This adjustment creates a short
time delay between the moment the coin is inserted into the Coin Slot to the moment the CPU/Sound
PCB registers the coin (30 = approxiamately 1/2 second).
#63 LOST BALL RECOVERY: Set to YES or NO. Factory Default = NO. Set to YES, at the start of the 5th
consecutive ball search (with no scoring between searches), the game will consider any balls in play to
be permanently lost and will attempt to recover from this situation by serving a new ball into play from the
ball trough. Set to NO (to suppress this adjustment behavior) for the game to perform the "ball search"
indefinitely until the lost balls are found or replaced.

*R7R$GMXVW 6HFWLRQ&KDSWHU
PHQWV0HQX 3DJH
 67$1'$5'$'-8670(176>²@6
STANDARD USA YOUR STANDARD USA YOUR
Nr. Nr.
ADJUSTMENT NAME DEFAULT SETTING ADJUSTMENT NAME DEFAULT SETTING
1 REPLAY TYPE AUTO 32 HIGH SCORE #1 __,000,000
2 ‡ REPLAY PERCENTAGE 10% 33 HIGH SCORE #2 __,000,000
3 ‡ REPLAY AWARD CREDIT 34 HIGH SCORE #3 __,000,000
4 ‡ REPLAY LEVELS 1 35 HIGH SCORE #4 __,000,000
5 ‡ AUTO REPLAY START __,000,000 36 HSTD INITIALS 3 INITIALS
6 ‡ DYNAMIC REPLAY START __,000,000 37 HSTD RESET COUNT 2000
7 ‡ REPLAY LEVEL #1 __,000,000 38 FREE PLAY NO
8 ‡ REPLAY LEVEL #2 __,000,000 39 LANGUAGE ENGLISH
9 ‡ REPLAY LEVEL #3 __,000,000 40 PLAYER LANGUAGE SELECT YES
10 ‡ REPLAY LEVEL #4 __,000,000 41 CUSTOM MESSAGE ON
11 ‡ REPLAY BOOST YES 42 FLASH LAMP POWER NORMAL
12 SPECIAL LIMIT 1 43 COIL PULSE POWER NORMAL
13 ‡ SPECIAL PERCENTAGE 10% 44 KNOCKER VOLUME NORMAL
14 SPECIAL AWARD CREDIT 45 GAME RESTART YES
15 FREE GAME LIMIT 5 46 BILL VALIDATOR NO
16 EXTRA BALL LIMIT 5 47 MUSIC VOLUME 1
17 ‡ EXTRA BALL PERCENTAGE 25% 48 BALL SAVE TIME 0:05
18 GAME PRICING USA 10 49 TIMED PLUNGER OFF
19 MATCH PERCENTAGE 9% 50 FLIPPER BALL LAUNCH OFF
20 MATCH AWARD CREDIT 51 COINDOOR BALL SAVER NO
21 BALLS PER GAME 3 52 COMPETITION MODE NO
22 TILT WARNINGS 2 53 CONSOLATION BALL YES
6HF*R7R$GMXVW

23 CREDIT LIMIT 30 54 FAST BOOT YES

24 ALLOW HIGH SCORES YES 55 Q24 OPTION COIN METER
25 HIGH SCORE AWARD CREDIT 56 TICKET DISPENSER NO
26 GRAND CHAMPION AWARDS 1 57 PLAYER COMPETITION YES
27 HIGH SCORE #1 AWARDS 1 58 TEAM SCORES NO
28 HIGH SCORE #2 AWARDS 0 59 LOCATION ID 0
29 HIGH SCORE #3 AWARDS 0 60 GAME ID 0
30 HIGH SCORE #4 AWARDS 0 61 TIME FORMAT 12-HOUR
31 GRAND CHAMPION SCORE __,000,000 62 COIN INPUT DELAY 30
63 LOST BALL RECOVERY YES
Factory Defaults Settings are subject to change during production (especially Standard Adjustments 2, 4, 5, 13, 16-17, 19, 31-35 & 47).
‡ Not all Standard Adjustments are shown. Depending on the setting (whether Factory Default or if changed by the operator), associated
adjustments do not appear, if not required. Note: If Game Dip Switch other than USA is installed, different Defaults will appear.

)HD WX UH$GMX VWPHQWV>²@

To initiate, from the ADJUSTMENTS MENU, select the "INDY" Icon. The Dot Matrix Display will indicate
the adjustment number (in this group), adjust. name, adjust. setting and comment line. The current
adjustment will remain on the display until the next adjustment is viewed or when this sub-menu is exited.

#1 RAIDERS DIFFICULTY : Set to EASY, MEDIUM or HARD.

Factory Default = MEDIUM. Determines how this feature is started and played.
#2 TEMPLE DIFFICULTY : Set to EASY, MEDIUM or HARD.
Factory Default = MEDIUM. Determines how this feature is started and played.
#3 CRUSADE DIFFICULTY : Set to EASY, MEDIUM or HARD.
Factory Default = MEDIUM. Determines how this feature is started and played.
#4 SKULL DIFFICULTY : Set to EASY, MEDIUM or HARD.
Factory Default = MEDIUM. Determines how this feature is started and played.
#5 INDY JONES DIFFICULTY : Set to EASY, MEDIUM or HARD.
Factory Default = MEDIUM. Determines how this feature is started and played.

Feature Adjustments 6-16 continued on the next page.

6HFWLRQ&KDSWHU *R7R$GMXVW
3DJH PHQWV0HQX
 )HDWXUH$GMXV WPHQWVF RQWLQX HG

#6 MAP SPELL OUT DIFFICULTY : Set to EXTRA EASY, EASY, MEDIUM, HARD or EXTRA HARD.
Factory Default = EXTRA EASY. Determines how this feature is started and played.
#7 SWORDSMAN DIFFICULTY : Set to EXTRA EASY, EASY, MEDIUM, HARD or EXTRA HARD.
Factory Default = EXTRA EASY. Determines how this feature is started and played.
#8 SWORDSMAN EXTRA BALL AT : Set between 0 – 5. Factory Default = 3.
Determines when Extra Ball is lit after completing Cairo Swordsman Hurry-Up Mode X number of times.
#9 LIGHT MYSTERY DIFFICULTY : Set to EXTRA EASY, EASY, MEDIUM, HARD or EXTRA HARD.
Factory Default = MEDIUM. Determines how this feature is started and played.
#10 X MARKS THE SPOT DIFFICULTY : Set to EXTRA EASY, EASY, MEDIUM, HARD or EXTRA HARD.
Factory Default = EXTRA EASY. Determines how this feature is started and played.
#11 EXTRA BALL MEMORY : Set to NO or YES. Factory Default = YES. Specifies whether extra balls lit from
Extra Ball shots will stay lit if the ball drains before collecting them.
#12 DISABLE TEMPLE OF DOOM MOTOR : Set to YES or NO. Factory Default = NO.
Set to YES if the Name coil (Q6) and/or switches (Sw. 52, 53 & 59) are awaiting repair or replacement.
#13 DISABLE CAIRO SWORDSMAN MOTOR : Set to YES or NO. Factory Default = NO.
Set to YES if the Name coil (Q30) and/or switches (Sw. 63 & 64) are awaiting repair or replacement.
#14 DISABLE ARK MOTOR : Set to YES or NO. Factory Default = NO.
Set to YES if the Name coil (Q27) and/or switches (Sw. 39, 50 or 51) are awaiting repair or replacement.
#15 DISABLE ARK DIVERTER : Set to YES or NO. Factory Default = NO.
Set to YES if the Name coil (Q7) and/or switches (Sw. 39, 50 or 51) are awaiting repair or replacement.

6HF*R7R$GMXVW
#16 SHAKER MOTOR (OPTIONAL) : Set to NONE, MINIMAL USE, MODERATE USE or MAXIMAL USE.
Factory Default = MODERATE USE. Set to any of the varying "... USES" if an Optional Shaker Motor Kit
(SPI Part Number 502-5027-00) was installed correctly in this pinball machine. See the assembly (kit)
on the last page of Section 4, Chapter 2 (Blue Pages). Also see Shaker Motor Coil (Q8) in the Coils
Detailed Chart Table at the begining of Section 5, Chapter 1 (Yellow Pages).

>>> FACTORY RESET or CODE UPDATE NOTE: Don’t forget, any changes you make to your adjustments will
revert back to the Factory Default settings if you perform a Factory Reset or update your Game Code.
See Section 3, Chapter 5, GO TO UTILITIES MENU (Go To Resets Menu & Go To USB Menu), Page 38.

Feature Adjustments Table 1-16 continued on the next page.

*R7R$GMXVW 6HFWLRQ&KDSWHU
PHQWV0HQX 3DJH
 )HDWXUH$GMXV WPHQWVF RQWLQX HG

)($785($'-8670(176>²@6VSDFHVIRUXSGDWHVLIDQ\VHHGRWGLVSOD\ 6
FEATURE USA YOUR FEATURE USA YOUR
Nr. Nr.
ADJUSTMENT NAME DEFAULT SETTING ADJUSTMENT NAME DEFAULT SETTING

1
RAIDERS MEDIUM 9
LIGHT MYSTERY MEDIUM
DIFFICULTY DIFFICULTY
2
TEMPLE MEDIUM 10
X MARKS THE SPOT EXTRA
DIFFICULTY DIFFICULTY EASY

3
CRUSADE MEDIUM 11
EXTRA BALL YES
DIFFICULTY MEMORY
4
SKULL MEDIUM 12
DISABLE NO
DIFFICULTY TEMPLE OF DOOM MOTOR
5
INDY JONES MEDIUM 13
DISABLE NO
DIFFICULTY CAIRO SWORDSMAN MOTOR
6
MAP SPELLOUT EXTRA 14
DISABLE NO
DIFFICULTY EASY ARK MOTOR
7
SWORDSMAN EXTRA 15
DISABLE NO
DIFFICULTY EASY ARK DIVERTER
8
SWORDSMAN 3 16
SHAKER MOTOR MODERATE
EXTRA BALL AT (OPTIONAL) USE
Factory Defaults Settings are subject to change during production
Note: If Game Dip Switch other than USA is installed, different Defaults will appear.

)($785($'-8670(176',)),&8/7<,167$//66800$5<6
6HF*R7R$GMXVW

INSTALL INSTALL INSTALL INSTALL INSTALL

RANGE RANGE
LOW HIGH EXTRA EASY MEDIUM (DEFAULT) HARD or EXTRA
Nr. FEATURE ADJUSTMENT NAME EASY or 3-BALL 5-BALL HARD

1
RAIDERS EASY HARD EASY EASY MEDIUM HARD HARD
DIFFICULTY
2
TEMPLE EASY HARD EASY EASY MEDIUM HARD HARD
DIFFICULTY
3
CRUSADE EASY HARD EASY EASY MEDIUM HARD HARD
DIFFICULTY
4
SKULL EASY HARD EASY EASY MEDIUM HARD HARD
DIFFICULTY
5
INDY JONES EASY HARD EASY EASY MEDIUM HARD HARD
DIFFICULTY
6
MAP SPELLOUT EX. EASY EX. HARD EX. EASY EX. EASY EX. EASY MEDIUM HARD
DIFFICULTY
7
SWORDSMAN EX. EASY EX. HARD EX. EASY EX. EASY EX. EASY MEDIUM HARD
DIFFICULTY
8
SWORDSMAN 1 5 1 2 3 4 5
EXTRA BALL AT
9
LIGHT MYSTERY EX. EASY EX. HARD EX. EASY EASY MEDIUM HARD EX. HARD
DIFFICULTY
10
X MARKS THE SPOT EX. EASY EX. HARD EX. EASY EX. EASY EX. EASY MEDIUM HARD
DIFFICULTY
11
EXTRA BALL NO YES YES YES YES YES NO
MEMORY
SOME INSTALLS MAY CHANGE ADJUSTMENTS NOT NOTED ABOVE WITH FUTURE UPGRADES. VIEW THE DOT DISPLAY FOR THE LATEST CHANGES OR ADDITIONS, IF ANY.
SEE SECTION 3, CHAPTER 5, GO TO INSTALLS MENU, FOR EXPLANATION OF ALL INSTALLS IN THE UTILITIES MENU. WHEN CHANGING INSTALLS, VIEW THE DOT DISPLAY
TO SEE THE NEW SETTINGS OF THE ADJUSTMENT. IF THE SETTING STILL INDICATES "(INSTALLED/FACTORY DEFAULT)", INSTALL CHANGE DID NOT AFFECT THE ADJ.

6HFWLRQ&KDSWHU *R7R$GMXVW
3DJH PHQWV0HQX
6HFWLRQ  &K DS WHU    RI 

To initiate, from the MAIN MENU, select the "UTIL" Icon. The UTILITIES MENU provides ways to quickly and
easily customize your game with Installs (pre-sets for game Standard & Feature Adjustments), set-up a Custom
Message (short-cut to Standard Adjustment 41, Custom Message), set-up Custom Pricing (short-cut to
Standard Adjustment 18, to the Custom Pricing Sub-Menu), set-up the Date and Time (required if the date and
time is needed to be accurate for data dumps and for tournaments), reset certain particular game data or perform
a complete Factory Reset and to download game data, update or backup game code in the USB MENU.

All UTILITIES, INSTALLS, RESETS MENU and USB MENU Icons and there usages are explained throughout
this chapter in the same order as seen in the Dot Matrix Display. NOTE: Depending on Game Type, Version,
selections made, Dip Switch settings, location and/or areas, some Icons may appear non-functional or may not
appear at all. Installs (Adjustments), Icons and/or functions, order and operation are subject to change.
If in doubt use the Factory Default Settings (review Install Factory on the next page).

6HF*R7R8WLOLWLHV
In displays where changes can be made or to perform a function, use the GREEN Button to go [ BACK ], exit or
escape, the RED Buttons to [ < / – ] MOVE BACK / LEFT / [ + / > ] MOVE FORWARD / RIGHT to view the next
audit in the group, and the BLACK Button to [ SELECT ] the sub-menus.

*R7R,QVWD OO V0HQX
To initiate, from the UTILITIES MENU, select the "INST" Icon. The INSTALLS MENU provides 13
Installs to vary Game Play Difficulty (set with Feature Adjustments) or Game Play Type and Install
Factory (restores all adjustments to Factory Defaults).

For detailed customization or to check current Adjustments Defaults (either changed by YOU in the
Adjustments Menu or by this INSTALLS MENU or for Factory Default Settings), see Section 3, Chapter 4, GO TO
ADJUSTMENTS MENU. After completing one or more of the Installs in this chapter, go back to the
ADJUSTMENTS MENU to see which Standard and/or Feature Adjustments have changed (Feature
Adjustments and/or settings are subject to change during production, and may differ than what is described in the
tables at the end of this chapter). The Dot Display will indicate if a setting is a Factory Default or not. If the
settings are not to your liking, perform one of the following:

1.: Manually change the Standard & Feature Adjustments Settings (perform this task in the ADJUSTMENTS
MENU, see Section 3, Chapter 4, GO TO ADJUSTMENTS MENU).

2.: Install Factory (see the last install) on how to reset all of the Standard & Feature Adjustments back to the
Factory Default Settings.

Multiple Installs can be set to vary game play; however, for Installs that have one or more Adjustments in
common, the last "Install" selected & activated, will supersede any previously changed Adjustment(s) from any
prior Installs. Any adjustments which you changed and are not affected by the Install will remain as set.

For example, if you want a 5-BALL Game set to EXTRA EASY: Select and activate the "5BAL" Icon first (which
will typically change any Feature Difficulty Adjustments to HARD), then select & activate the "X.EZ" Icon to
change back the Difficulty Adjustments to EXTRA EASY. However, if the "X.EZ" Icon was selected & activated
first, then the "5BAL" Icon was selected & activated, the game will be set to a 5-BALL Game set to HARD.

Remember, use the GREEN Button to go [ BACK ], exit or escape and the BLACK Button to [ SELECT ] to
INSTALL your new setting(s).

INSTALLS MENU continued on the next page.

*R7R 6HFWLRQ&KDSWHU
8WLOLWLHV0HQX 3DJH
 ,167$//60(18&RQWLQXHG
,QVWDOO([WUD(DV \(DV \0HGLX P 1RUPDORU
)DF WRU \ 6H WWLQJV +DUGRU([WUD+DUG
To initiate, from the INSTALLS MENU, select one of the "X.EZ,"
"EASY," "FACT," "HARD," or "X.HD" Icons. The Dot Matrix Display
will indicate the INSTALL EXTRA EASY, EASY, MEDIUM, HARD or EXTRA HARD depending on choice. Follow
the on-screen prompts to perform the Install. Set the Game Play Difficulty level.

,QVWDOO%DOO
To initiate, from the INSTALLS MENU, select the "3BAL" Icon. The Dot Matrix Display will indicate the
INSTALL 3-BALL. Follow the on-screen prompts to perform the Install.
Set the Game Play Type to 3 Balls per game (Factory Default is 3 Balls per game, not including extra’s...).

,QVWDOO%DOO
To initiate, from the INSTALLS MENU, select the "5BAL" Icon. The Dot Matrix Display will indicate the
INSTALL 5-BALL. Follow the on-screen prompts to perform the Install.
Set the Game Play Type to 5 Balls per game (not including extra balls earned by the player, if any).

,QVWDOO&RPSHWLWLRQ
To initiate, from the INSTALLS MENU, select the "COMP" Icon. The Dot Matrix Display will indicate the
INSTALL COMPETITION. Follow the on-screen prompts to perform the Install.
Set the Game Play Type to "Tournament" Rules. Programming varies and is subject to change.

,QVWDOO'LUHFWRU ·V&XW
To initiate, from the INSTALLS MENU, select the "DCUT" Icon. The Dot Matrix Display will indicate the
INSTALL DIRECTOR’S CUT. Follow the on-screen prompts to perform the Install.
6HF*R7R8WLOLWLHV

Set the Game Play Type to programmer’s choice. Programming varies and is subject to change.

,QVWDOO+RPH3OD\
To initiate, from the INSTALLS MENU, select the "HOME" Icon. The Dot Matrix Display will indicate the
INSTALL HOME PLAY. Follow the on-screen prompts to perform the Install.
Set the Game Play Type to "Home" Rules. Programming varies and is subject to change.

,QVWDOO1RYH OW\
To initiate, from the INSTALLS MENU, select the "NOV" Icon. The Dot Matrix Display will indicate the
INSTALL NOVELTY. Follow the on-screen prompts to perform the Install.
********** This setting is recommended where local laws restrict certain game features. **********
Set the Game Play Type to "Restricted" Rules. Programming varies and is subject to change.

,QVWDOO$GG$%DOO
To initiate, from the INSTALLS MENU, select the "A.A.B." Icon. The Dot Matrix Display will indicate the
INSTALL ADD-A-BALL. Follow the on-screen prompts to perform the Install.
********** This setting is recommended where local laws restrict certain game features. **********
Set the Game Play Type to "Restricted" Rules. Programming varies and is subject to change.

,QVWDOO)DFWRU \
To initiate, from the INSTALLS MENU, select the "FACT" Icon. The Dot Matrix Display will indicate the
INSTALL FACTORY. Follow the on-screen prompts to perform the Install. CAUTION! All Standard
and Feature Adjustments which were changed in the INSTALLS MENU or ADJUSTMENTS MENU are
returned to the Factory Defaults (as indicated in the Dot Display in the ADJUSTMENTS MENU). Note: To
perform a complete Factory Reset, GO TO THE RESETS MENU. Escape back to the UTILITIES MENU, select
the "RESET" Icon, then select the "FACT" Icon in the RESETS MENU (review the end of this chapter, Page 38,
Reset Factory Settings).

6HFWLRQ&KDSWHU *R7R
3DJH 8WLOLWLHV0HQX
 (QWHU &X VWRP0HVVD JH
To initiate, from the UTILITIES MENU, select the "ABCD CUST MSG" Icon. The SET CUSTOM
MESSAGE (a short-cut for Standard Adjustment 41, Custom Message) provides an opportunity to have
a text message appear in the the Attract Mode. Follow the on-screen prompts to complete [ END ].

Remember, use the GREEN Button to go [ BACK ], exit or escape, the RED Buttons to [ < / – ] MOVE LEFT /
CHOOSE NEXT [ + / > ] MOVE RIGHT / CHOOSE PREVIOUS, and the BLACK Button to [ SELECT ] as ’OK’.

6HW&X VWRP3ULFLQJ
To initiate, from the UTILITIES MENU, select the "PRIC" Icon. The CUSTOM PRICING MENU (a
short-cut for Standard Adjustment 18, Game Pricing, and setting selected is CUSTOM) provides an
opportunity to set Custom Pricing.

Note ! MONETARY AMOUNT MUST BE SELECTED FIRST! Press [ BACK ] to – DECREASE or [ SELECT ] to
+ INCREASE the [ < $ > ] monetary amount (e.g. look at the right side of the display from $0.25 to $0.50 ).
Press [ < / – ] to – DECREASE or [ + / > ] to + INCREASE the credit quantity (e.g. look at the left side of the
display from 0 CREDITS AT: to 1 CREDIT AT:).
REMINDER
In these menus:
IF EXAMPLE CUSTOM PRICING SETTING DESIRED IS :
1 Play for $0.50, 3 Plays for $1.00 and 7 Plays for $2.00 Press [ BACK ] to – DECREASE [ < $ ]

THEN YOU WILL NEED TO PERFORM THE FOLLOWING : Press [ SELECT ] to + INCREASE [ $ > ]

Step 1 The starting display appears as below if no Step 2 Press [ SELECT ] to + INCREASE to $0.50.
prior Custom Pricing was installed. Press [ + / > ] to + INCREASE to 1 CREDIT AT:

6HF*R7R8WLOLWLHV
Step 3 Press [ SELECT ] to + INCREASE to $1.00. Step 4 Press [ SELECT ] to + INCREASE to $2.00.
Press [ + / > ] to + INCREASE to 2 CREDITS AT: Press [ + / > ] to + INCREASE to 4 CREDITS AT:

Step 5 Press [ SELECT ] to + INCREASE the amount Step 6 Press [ SELECT ] to INSTALL.
once (example = $2.25). Press [ < / – ] once ... Press [ < / – ] / [ + / > ] or [ BACK ] to edit.

... or press [ + / > ] eleven times until INSTALL appears.

Step 7 Press [ SELECT ], press [ BACK ] twice to exit the SERVICE MENU with your Custom Pricing installed.

To correct or make new changes, reenter, which brings you to Step 6. Press [ BACK ] repeatedly until the
monetary amount shown is the desired amount and then continue following the above steps with your new or
corrected settings. If you are still having difficulty or if you have any questions, please call Technical Support
800-542-5377 or 708-345-7700, option 1.

*R7R 6HFWLRQ&KDSWHU
8WLOLWLHV0HQX 3DJH
 6 H W  ' DW H  7L P H
To initiate, from the UTILITIES MENU, select the "TIME" Icon. The SET TIME MENU appears with the
MONTH flashing. Setting the date and time is required for ’Data Dumps’ and Tournament Start and End
Dates. If the setting of Standard Adjustment 61, Time Format, is set to 12-HOUR (Factory Default) the
time will be expressed in the AM / PM format. If Standard Adjustment 61, Time Format, is set to 24-HOUR the
time will be expressed in the 24-hour format.

*R7R5HVHWV0HQX
To initiate, from the UTILITIES MENU, select the "RESET" Icon. The RESETS MENU provides six (6)
functions to reset only the Coin Audits, reset only the Game Audits, reset only the Grand Champion
Score, reset only the High Score(s), reset only the paid Credits (includes Service Credits) or to reset
ALL DATA back to the Factory Default Settings.

5HVHW&RLQ$XGLWV
To initiate, from the RESET MENU, select the "COIN" Icon. ONLY the Coin Audits
[ Earnings Audits 5–12 ], will be reset to zero (0), Factory Default Settings. Follow the on-screen prompts
to perform the Reset.

5HVHW*DPH$XGLWV
To initiate, from the RESET MENU, select the "AUD" Icon. ONLY the Game Audits
[ Earnings Audits 1–4, Standard Audits 1–59 and Feature Audits 1–XX* ], will be reset to zero (0),
Factory Default Settings. Follow the on-screen prompts to perform the Reset. *varies per game title.

5HVHW*UDQG&K DPSLRQ 6F RUH

6HF*R7R8WLOLWLHV

To initiate, from the RESET MENU, select the "GC" Icon ONLY the Grand Champion Score
[ adjustable via Standard Adjustment 31 ], will be reset to Factory Default Setting. Follow the on-screen
prompts to perform the Reset.

5HVHW+LJK6FRUHV
To initiate, from the RESET MENU, select the "HSTD" Icon. ONLY the High Score(s) [adjustable via
Standard Adjustments 32–35 ], will be reset to Factory Default Setting(s). Follow the on-screen prompts
to perform the Reset. Note: High Scores (but not Grand Champion Score) are reset automatically every
2,000 games (Factory Default Setting) [adjustable via Standard Adjustment 37, HSTD Reset Count ].

5HVHW&UHGLWV
To initiate, from the RESET MENU, select the "CRED" Icon. ONLY the Credits (includes Service
Credits) [ adjustable via Standard Adjustment 23, Credit Limit ], will be reset to zero (0), Factory Default
Settings. Follow the on-screen prompts to perform the Reset.

5HVHW)DFWRU \6H WWLQJV

To initiate, from the RESET MENU, select the "FACT" Icon. ALL GAME DATA IS RESET! (with the
exception of Earnings Audit 13, Software Meter). NOTE: IF YOU HAD SET-UP CUSTOM PRICING OR
HAD CHANGED ANY ADJUSTMENTS OR PERFORMED INSTALLS, IT IS SUGGESTED TO WRITE
DOWN YOUR CHANGES PRIOR TO THE FACTORY RESET. Follow the on-screen prompts to perform the Reset.

*R7R86%0HQX
To initiate, from the UTILITIES MENU, select the "USB" Icon. The USB MENU provides three (3)
functions to download game data, update your game code or backup your code onto a USB Memory
Stick. Review the inside cover for information on how to update your game code.

8SGDWH*DPH &RGH 'XPS$X GLWVWR86%

To initiate, from the USB MENU, select the To initiate, from the USB MENU, select the
"UPDT" Icon. Follow the on-screen prompts or "DUMP" Icon. Follow the on-screen prompts
review the inside cover for more information. to perform a Data Dump (download). Note: If
Icon is not present, access via the Audits
%DF NXSWR86%0HPRU \6WLF N Menu, see Section 3, Chapter 3.
To initiate, from the USB MENU, select the "BKUP" Icon. Follow the on-screen prompts to perform a
Backup (game code only). This backup feature does not retain adjustments and/or settings changes made.

6HFWLRQ&KDSWHU *R7R
3DJH 8WLOLWLHV0HQX
6HFWLRQ  & KD SW H U    R I  
MENU UNDER EVOLUTION

To initiate, from the MAIN MENU, select the "TOUR" Icon. The TOURNAMENT MENU provides ways to quickly
and easily start and stop a tournament. Also, tournament data can be viewed (audits, prize info, etc.).
All TOURNAMENT MENU Icons and there usages are explained throughout this chapter in the same order as
seen in the Dot Matrix Display. NOTE: Depending on Game Type, Version, selections made, Dip Switch settings,
location and/or areas, some Icons may appear non-functional or may not appear at all. Icons and/or functions,
order and operation are subject to change.

In displays where changes can be made or to perform a function, use the GREEN Button to go [ BACK ], exit or
escape, the RED Buttons to [ < / – ] HIGHLIGHT PREVIOUS or DECREASE / [ + / > ] HIGHLIGHT NEXT or
INCREASE to highlight the desired option, and the BLACK Button to [ SELECT ] it or activate.

6HF7RXUQDPHQW
6WDUW7RXU QD P HQW
To initiate, from the TOURNAMENT MENU, select the "STRT" Icon. The START TOURNAMENT MENU
allows the operator to start a tournament. Select QUICK START or CUSTOM Tournament Start. For the
first time Tournament Set-Up, it is recommended to select CUSTOM. Follow the on-screen prompts.
After completion of all options in QUICK START or CUSTOM, the Tournament is started, the START TOURNA-
MENT MENU is exited and returns to the TOURNAMENT MENU.
48,&.67$57
Increase or decrease the: x DAYS, HOURS and MINUTES x PRIZE POOL $ (DOLLAR) and ¢ (CENT) AMOUNT
x INCREMENT THE PRIZE POOL PER PLAY INCREASES $ and ¢ AMOUNT

&8672067$57
x Confirm the current date and time (if it was not set previous via the UTILITIES MENU it can be set-up in this
display as well). Enter the MONTH, DAY, YEAR and TIME
x Choose the Tournament Start Date: MONTH, DAY, YEAR and TIME
x Choose the Tournament End Date: MONTH, DAY, YEAR and TIME

x Choose the CREDITS per play desired (01-10). Set the maximum number of Credits that may be accumulated
per game. Note: The current pricing is displayed; to change pricing GO TO THE ADJUSTMENTS MENU.

Increase or decrease the: x PRIZE POOL $ (DOLLAR) and ¢ (CENT) AMOUNT

x INCREMENT THE PRIZE POOL PER PLAY INCREASES $ and ¢ AMOUNT
x MAXIMUM (CAP) PRIZE POOL $ and ¢ AMOUNT.

x Increase or decrease the number of PRIZES (01-05 HIGH SCORE; 02-05 B’N’W). Set the maximum # of Prize
Positions to be awarded during a Tournament. Selections are as follows (% distribution cannot be changed):
.......HIGH SCORE: .......BUMP N’ WIN :
Set to 01 1 Winner 100% (1) Prize Pool Cannot set to 01. Minimum of 2 winners required.
Set to 02 2 Winners 65% (1) 35% (2) Set to 02 2 Winners 65% (1) 35% (2)
Set to 03 3 Winners 50% (1) 30% (2) 20% (3) Set to 03 3 Winners 50% (1) 25% (2) 25% (3)
Set to 04 4 Winners 50% (1) 25% (2) 15% (3) 10% (4) Set to 04 4 Winners 40% (1) 20% (2) 20% (3) 20% (4)
Set to 05 5 Winners 50% (1) 20% (2) 15% (3) 10% (4) 5% (5) Set to 05 5 Winners 40% (1) 15% (2) 15% (3) 15% (4) 15% (5)

x Select the AWARD TYPE (CASH, POINTS, PRIZE, TICKETS or NONE). Select CASH for the displays to
represent the Prize Pool amount (based on Jackpot Base and Max.) in $Dollars. Select POINTS for the display
to represent the Prize Pool amount in Points. Select PRIZE, if applicable. Select TICKET for the display to
represent the Prize Pool amount in Tickets. Select NONE NOT TO represent anything.
Custom Start continued on the next page.

*R7R 6HFWLRQ&KDSWHU
7RXUQDPHQW0HQX 3DJH
 &8672067$57&RQWLQXHG
The following option is available only if CASH was selected as the AWARD TYPE.
x Select the option to SHOW PLAYER CASH (YES or NO). Select YES for the display to represent the
>>> previous <<< Tournament Winners & Cash amount (or Points, Prizes, etc.) will show in the Attract Mode.
x Select the kind of TOURNAMENT desired (BUMP ’N’ WIN or HIGH SCORE).

The following options are available only if BUMP ’N’ WIN was selected as the TOURNAMENT TYPE.
x Select or confirm the BASE POINT AMOUNT (00 or 1,000,000 – 4,294,967,295 increments of 1,000,000.
x Select or confirm the RANGE AMOUNT (00 or 1,000,000 – 4,294,967,295 increments of 1,000,000).
x Select the BALLS per game (1 – 10).

6723 7285 1 $0 ( 1 7
To initiate, from the TOURNAMENT MENU, select the "STOP" Icon. The STOP TOURNAMENT MENU
allows the operator to stop a tournament. Note: This Icon only appears if a Tournament was set-up and
is running (in place of the Start Icon).

672372851$0(17$5(<28685("
x Use the BLACK Button to [ SELECT ] to confirm. Press the BLACK Button again to continue.

The STOP TOURNAMENT MENU is exited and returns to the TOURNAMENT MENU.

9 ,(: 72851$ 0(17'$7$

6HF7RXUQDPHQW

To initiate, from the TOURNAMENT MENU, select the "DATA" Icon. If no data is available, the display will
indicate NO PREVIOUS DATA. Press the GREEN Button to escape [ BACK ] to the TOURNAMENT
MENU.

72851 $0(1 7$8',76>²@

To initiate, from the TOURNAMENT MENU, select the "AUD" Icon. The Dot Matrix Display will indicate
the audit number (in this group), audit name and the audit total or value. The current audit will remain on
the display until the next audit is viewed or when this sub-menu is exited.

01 TOTAL PLAYS : Total number of Regular and Tournament Games played while a Tournament is in progress.
This total is derived by adding the below Tournament Audit 02 with Regular Plays.
02 TOURNAMENT PLAYS : Total number of Tournament Games played while a Tournament is in progress.
03 TOTAL QUALIFYING PLAYS : Total number of times a player qualified (invited to enter name).
04 TOTAL GAME EARNINGS : Total Gross Earnings accepted, while a Tournament is active (in progress).
05 TOTAL TOUR. EARNINGS : Tournament Earnings (Audit 04 less Reg. Game Earnings) while a Tournament is in progress.
06 JACKPOT (PRIZE POOL TOTAL) : Total Prize Pool (Jackpot) Amount to be paid out while a Tournament is in progress.
07 NET EARNINGS : Provides the total Net Earnings (Gross Earnings less Prize Pool) while a Tournament is active (in progress).
08 ACCUM. TOTAL PLAYS : Accumulative total amount of Regular & Tourn .Games played since the first Tournament was played.
09 ACCUM. TOUR. PLAYS : Accumulative total amount of Tournament Games played since the first Tournament was played.
10 ACCUM. QUALIFYING PLAYS : Accumulative total number of times a player qualified (invited to enter name).
11 ACCUM. EARNINGS : Total Gross Earnings accepted, since the first Tournament was played.
12 ACCUM. TOUR EARNINGS : Accumulative total Tournament Game Earnings since the first Tournament was played.
13 ACCUM. JACKPOT : Accumulative total of Prize Pool (Jackpot) Amounts paid out since the 1st Tourn. was played.
14 # TOURNAMENTS : Number of Tournaments (not individual Tournament Games) since the first Tournament was played.

6,*1 0 (66$*(6 $²%

To initiate, from the TOURNAMENT MENU, select the "A-B TEXT" Icon. At time of print, menu
non-functional. If made available in future code updates, this menu will allow the operator to display
"Location" and "Prize" Messages. Follow the on-screen prompts to complete [ END ].

Remember, use the GREEN Button to go [ BACK ], exit or escape, the RED Buttons to [ < / – ] MOVE LEFT /
CHOOSE NEXT [ + / > ] MOVE RIGHT / CHOOSE PREVIOUS, and the BLACK Button to [ SELECT ] as ’OK’.

6HFWLRQ&KDSWHU *R7R
3DJH 7RXUQDPHQW0HQX
6HFWLRQ  &K DS WHU   RI 
3DUWV,GHQWLILFDWLR Q /RFDWLR Q 7KH3LQN3DJHV
7DEOHRI&RQWHQWV
IRU6HFWLRQ&KDSWHURI
7DEOHRI&RQWHQWVIRU6HFWLRQ&KDSWHU  
%DFNER[>6$06\VWHP@3DUWV F ²
Z Backbox & Tournament Header Sign Front Views Z Backbox Parts Table Z Backglass Parts Table
6SHDNHU3DQHO>6$06\VWHP@3DUWV F  
Z Speaker Panel Side View Z Speaker Panel Parts Table
&DELQHW3DUWVJ 6ZLWFKHVF ²
Z Cabinet Inside Views Z Cabinet Parts & Switches Table
3OD\ILHOG7RS0LVFHOODQHRXV3DUWV F %UDFNHWVJ  
Z Playfield Location & Bottom Arch Drawings Z Misc. Parts (Above) Table Z Misc. Brackets (Above) Table
3OD\ILHOG%RWWRP0LVFHOODQHRXV3DUWV J %UDFNHWVJ
Z Playfield & Back Panel Location Drawings Z Misc. Parts (Below) Table Z Misc. Brackets (Below) Table
3OD\ILHOG7RS6ZLWFKHV $ERYH  F  
Z Playfield Location Drawing
3OD\ILHOG%RWWRP6ZLWFKHV %HORZ  J 
Z Playfield Location Drawing
3OD\ILHOG7RS)ODW5DLOV F:RRG5DLOVJ%DOO*XLGHVJ :LUH)RUPVJ  
Z Playfield Location Drawing Z Flat Rails Table Z Wood Rails Table Z Ball Guides Table Z Wire Forms Table
3OD\ILHOG7RS3ODVWLFV 6FUHHQHG &OHDU .LW'HFDOV 0\ODU.LWV  
Z Plastic Shape & Decal Art Drawings
3OD\ILHOG7RS %RWWRP0HWDO3RVWV F )LQ6KDQN6FUHZV J $FWXDO6L]H ²
Z Metal Posts & Fin Shank Screw Drawings Z Metal Posts Table Z Fin Shank Screws Table Z Playfield Location Drawing
3OD\ILHOG7RS %RWWRP1\ORQ6WRS.(36+H[7)ODQJH3DO :LQJ1XWV $FWXDO6L]H  
Z Nylon Stop Nuts Table Z Keps Nuts Table Z Hex Nuts Table Z T-Nuts Table Z Flange Nuts Table Z Pal Nuts Table
Z Wing Nuts Table
3OD\ILHOG7RS+H[6SDFHUV F $FWXDO6L]H  ²
Z Hex Spacers Drawings Z Hex Spacers Table Z Playfield Location Drawing
3OD\ILHOG7RS3ODVWLF3RVWV 6SDFHUV F 0HWDO6SDFHUVJ  ²

6HF3DUWV,G
Z Plastic Posts & Spacers Drawings Z Plastic Posts & Spacers Table Z Playfield Location Drawings
3OD\ILHOG7RS %RWWRP5XEEHU3DUWV%ODFN J %OXHJ 5LQJV$FWXDO6L]H ²
Z Rubber Parts Drawings Z Rubber Bumper Pads Table Z Rubber Bumper Post Sleeves Table Z Rubber Rings Table
Z Playfield Location Drawing(s)
3OD\ILHOG7RS %RWWRP6PDOO%D\RQHW6RFNHWV %XOEV J $FWXDO6L]H ²
Z Bulbs & Socket Drawings Z Bulbs (#44 / LED & #455) Table Z Small Bayonet Sockets Table
3OD\ILHOG%RWWRP/DUJH%D\RQHW6RFNHWV %XOEV J $FWXDO6L]H  
Z Bulbs & Socket Drawings Z Bulbs (#89) Table Z Large Bayonet Sockets Table
3OD\ILHOG7RS %RWWRP:HGJH%DVH6RFNHWV %XOEV J $FWXDO6L]H  
Z Bulbs & Socket Drawings Z Bulbs (#555 & LED / #906) Table Z Wedge Base Sockets Table

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 %DFNER[>6$06\VWHP@3DUWVF

28 5 28
17 18 19 21
27
12 13

6 7
14
6
USB
Port 30
9 Coin 7A
Battery
20
37
7B
Boot :
EPROM
27 27
I/O Power Driver PCB CPU/Sound PCB

9 8R
8L 9

10 For more information on the Backbox PCBs, see Section 5.

Item 4 is secured
over Item 3
11
1 3
27 2

25 41 4

31 Speaker Panel Assembly (see next page).

40 32-38 40

24 23 The Backglass is Not Shown in this Front View for clarity.

Qty. 2 22 1
each

Nr. BACKBOX PARTS QTY. SPI PART Nr. Nr. BACKBOX PARTS QTY. SPI PART Nr.
6HF3DUWV,G

1 Backbox Indiana Jones• (No Parts) 1 525-5631-18-A4 Starter - Fluorescent (FS2 Light) 1 165-5011-01
Item 1 Note: Gold & Black T-Molding is installed and cannot be ordered separately. 11 Starter Base (with leads) [on Item 8L]
Fuse Description (820-6384-00) and High Voltage Caution (UL) (820-6082-01) Decals. 1 077-5213-00
Item 11 is secured to Item 8L by: #4-40 X 1/2" PPH MS (Sems) Zc. (Qty. 2) (237-5813-00)
2 PCB Metal Mounting Plate [Display] 1 535-9769-00 Ballast Mounting Plate
Display Power Supply PCB
12 1 535-8657-00
3 1 520-5138-00 13 Ballast CU452-W 1/2" Core 120v 60 Hz 13W 1 010-5015-00
Item 3 is secured to @ bottom by: #8-32 X 3/8" SHWH Swg. (Zinc) (Qty. 2) (237-5975-00)
Items 12 & 13 are secured to Item 1 by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2) (234-5101-00)
4 Plastic Cover [DANGER HIGH VOLTAGE] 1 830-6053-00 >>> CAUTION - VERY HOT" Decal (820-6266-00)
Items 3 & 4 are secured to @ top by: 1-1/4" X 3/8" Plastic Spacer Gray (Qty. 2) EU / UK Only : Ballast, 5/8" Core 50/60 Hz (010-5015-01)
(254-5000-05) and #8-32 X 1-3/4" SHWH Ser. (Zinc) (Qty. 2) (237-5975-28)
14 Ground Strap (5") 1 600-5006-05
5 PCB Metal Mounting Plate [I/O+CPU] 1 535-9664-00 15* Roto Lock Male (on Cabinet) 1 355-5006-01
Items 2 & 5 are secured to Item 1 by: #8 X 1/2" SHWH AB (Zinc) (Qty. 1/hole)
(234-5101-00) and #10 Washer 7/32" I.D. X .5" O.D. X 1/16" Thick (Qty. 1/hole) (242-5003-00) 16 Roto Lock Female (R2-0002-02) 1 355-5006-02
Note: Where a Wire Clamp (Item 27) is mounted, a #10 Washer is not required. Item 16 is secured by: #10-24 X 1-3/4" CBSN (231-5022-00), #10-24 Keps Nut (Qty. 2)
(240-5207-00), #10-24 X 2" CBSN (231-5045-00) and
6 I/O Power Driver PCB [S.A.M. Sys.] 1 520-5249-00 #10 Washer 7/32" I.D. X .5" O.D. X 1/16" (Qty. 5) (242-5003-00); See opposite next page.
7 CPU/Sound PCB [S.A.M. System] 1 520-5246-00 17 Lock Mounting Plate 1 535-0072-00
7A: 8MB EPROM #M27C801-100F1 (960-5016-00)
Ordering Note: Programmed EPROM (965-BOOT-SAM) 18 Lock 5/8" Barrel, 3/4"ø, 1.5" Flat Cam 1 355-5055-00
7B: Coin Cell Battery (CR2430 3V) (000-0644-01) Items 17 & 18 are secured by: #8 X 1/2" TP Torx T20 Black (Qty. 2) (237-6173-05)
For USB Memory Stick Information, see Item 30 on the next page. Back Vent Grill 2-1/2" X 18"
Items 6 & 7 are secured to Item 5 by: #8-32 X 3/8" SHWH Swage (Zinc) (Qty. 10)
19 1 545-5072-02
(237-5975-00) and 1/4" Slf. Rtn. Spacer White (Qty. 5 [ I/O ] / Qty. 4 [ CPU ]) (254-5007-05) 20 Ribbon Cable, 20-Pin (3.5") 1 036-5000-350
Item 20 connects the I/O Pwr. Drvr. PCB to the CPU/Sound PCB; For 14-Pin see next page.
8L Fluorescent Light Bracket (Left Style) 1 535-7739-00 Button Hole Plug (Blk) (Happ #52-6214-00)
8R Fluorescent Light Brckt. (Right Style) 1 535-7739-01 21 1 500-6566-00
Item 21 plugs the Access Hole required if using optional BETAbrite Sign or Data cables.
Items 8L & 8R are secured to Item 1 by: #10-24 X 1-1/4" Carriage Bolt Square Neck
22 Header Sign TOURNAMENT PINBALL 1 545-6133-00
56
(Qty. 2/per) (231-5012-00), #10-24 Keps Nut (Qty. 2/per) (240-5207-00) and
3/4" X 3" Reinforced Strapping Tape (Qty. 1, sold in 12" length only) (626-5040-00)
23 Friction Hinge (Black) behind 2 390-5053-00
9 Fluorescent Lamp Holder (Socket) 2 077-5214-01 Block / Sign & Hinge Stop (Black)
Item 9 is secured to Items 8L and 8R by: #6-32 X 5/8" PPH MS (Sems) Zinc (Qty. 1/per) 24 2 545-6174-00
(232-5203-00) Lock-In Fluor. Bulb with Yellow Socket Clip (Qty. 1/per) (545-6271-00) Item 22 is sandwiched between Items 23 & 24 through 2 holes on each side. Item 23
is secured to Item 1 by: #8-32 X 3/8" PPH MS Ext. Sems (Zinc) (Qty. 2/per) (232-5301-00)
10 Fluorescent Tube 24" (F20T9CW) 1 165-5061-00 and Item 24 to Items 22-23 by: #8 X 5/8" PPH AB Black (Qty. 2/per) (232-5101-01)
PARTS TABLE & VIEWS CONTINUED ON THE NEXT PAGE. :

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 %DFNER[>6$06\VWHP@3DUWVF
42
42
36
Qty. 2
Qty. 2
40 32 33-38 39 39 Qty. 2

1
31
16 16
Qty. 2 35

29L
)URQW9LHZ 29R 29R
(Broken View)

For Securing Hardware, see the Parts Table below, under the Item desired.

6SHDNHU3DQHO>6$06\VWHP@3DUWVF
41 38 37 39
39 41
42 36 42

40 40

6LGH9LHZ 35 32 34 35 31

Nr. BACKBOX PARTS QTY. SPI PART Nr. Nr. SPEAKER PANEL PARTS QTY. SPI PART Nr.
9 PARTS TABLE & VIEWS CONTINUED FROM THE PREVIOUS PAGE. 31 Speaker Panel (Black Wood) 1 525-5515-00
25 Braided Wire (1-1/2 Feet) 1 600-5001-00 32 Plastic Shield (Display Front Cover) 1 545-5884-00
Item 25 is secured by: Staple 5/16" (Qty. 23) (631-5000-00) Item 33 is secured to inside Item 31 by: #6 X 3/8" SHWH AB (Zinc) (Qty. 8) (234-5000-00)
26* Zip Cable Tie (Screw Down Style) 2 040-5005-00 33* Foam 3/16" Thick X 1/4" Wide X 12" 3 626-5026-00
Item 26 is secured @ inside bot. by: #8 X 1/2" SHWH AB (Zinc) (Qty. 1/per) (234-5101-00) Above Item 33 is self-adhesive. Located between Items 32-34. Sold in 12" Lengths only.
27 Clamps [Multiple Sizes] 15 040-5000-XX 128 X 32 Dot Matrix Display PCB 1 520-5052-00

6HF3DUWV,G
Item 27 secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 1/per) (234-5101-00) For the
following sizes, replace -XX with: .1/4" Double = -23 (Qty. 5); 1/2" Single = -06 (Qty. 3); 34 // EURO ONLY RoHS // 128 X 32 DM Pin-LED PCB 520-5052-04
3/4" Single = -08 (Qty. 4); 1" Single = -09 (Qty. 1); 1-1/4" Double = -30 (Qty. 1) // EURO ONLY RoHS // Dot Matrix Pin-LED Bezel 545-6281-00
Foam 3/16" Thick X 1/4" Wide X 12" Item 34 is secured to Item 35 by (at corners): 3/16" X 3/8" Spacer Gray (Qty. 4)
28 3 626-5026-00 (254-5000-18) and #6-32 X 1/2" SHWH Swage (Serr) Zinc (Qty. 4) (237-5976-03)
Above Item 28 is self-adhesive. 17.5" strip on each side. Sold in 12" Lengths only.
35 Dot Matrix Display Mounting Bracket 2 535-8368-01
29L Pivot Hinge (Left Style) 1 535-7999-00 Item 35 is secured to Item 31 by: #8 X 1/2" SHWH AB (Zinc) (Qty. 4/per) (234-5101-00)
29R Pivot Hinge (Right Style) 1 535-7999-01 Plastic Shield (Display Back Cover)
Items 29L-29R are secured to Backbox by: 1/4"-20 X 1-1/4" C.B. Sq. Neck (Qty. 4) 36 1 830-6040-00
(231-5003-00) and 1/4"-20 Flange Nut (Qty. 4) (240-5300-00) Item 36 is secured to Item 34 by: 1/2" X 1/4" Hex Spacer #6-32 Tap (Qty. 4)
Items 29L-29R are secured to Cabinet by: Spacer Hex Nut 1/2" O.D. - 1/4-20 X 1/2" TD (254-5008-03), 3/4" X 1/4" Hex Spacer #6-32 Tap (Qty. 2) (254-5008-04), #6-32 X 1/4" PPH
(Black) (Qty. 1/per) (254-5042-00), Nylon Spacer (Black) (Qty. 1/per) (242-5084-00), MS (Sems) Zinc (Qty. 2) (232-5200-00) and #6-32 X 3/8" PPH (Qty. 6) (232-5201-00)
1/4-20 X 1/2" Carriage Bolt Square Neck (Black) (Qty. 1/per) (231-5072-00) and Ribbon Cable, 14-Pin (32")
Washer 1" O.D. X 1/2" I.D. X 1/16" (Black) (Qty. 1/per side, only if required) (242-5087-00)
37 1 036-5260-32
Memory Stick USB 1.1+ [Generic] 64MB // EURO ONLY RoHS // LED Ribbon Cable Filter PCB 520-5259-00
30* 970-0064-00 Item 37 (14-Pin) connects the 128 X 32 Dot Matrix Display PCB to the CPU/Sound PCB.
Memory Stick USB 1.1+ [Generic] 128MB 970-0128-00
Item 30 was not included with your game. Read the inside cover or go on-line for more info.
Display Cable (Wiring Harness) 1 036-5454-01
38 // EURO ONLY RoHS // LED Display Adapter Harness
To order with the latest game code copied onto it, add -A4 to the Part Nr. (970-0128-00-A4). 036-5520-00
Speaker (Shld.) 4" 8: #MG ELE 4060SH 2
File(s) can be downloaded from our website (Files are 25MB or larger, DSL or Fast Modem
recommended). Not all manufacturers of Memory Sticks are compatible with our system. 39 031-5004-02
Test it out, if it doesn’t work properly, return your purchase and order the memory stick
40 Speaker Grill (Brass w/no Artwork) 2 535-8081-03
through you local pinball distributor (Stern Pinball Memory Sticks guaranteed compatible).
Items 39-40 are secured by: #8 X 1/2" SHWH AB (Black) (Qty. 4/per) (234-5101-01)
(ASM. REF. 505-6002-A4-A4, Items 1-42 Only, [29-30 not included in assembly])
41 Ground Strap (25") [ 2 per : Items 35 & 39 ] 4 600-5006-25
7DNH1RWH 42 Speaker Panel Hook Bracket 2 535-7009-02
Item 42 is secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2/per) (234-5101-00)
* An asterisk ( * ) indicates item(s) are not noted in the pictorials. (ASM. REF. 515-6888-06, Items 31-42 Only [includes wiring])

Nr. BACKGLASS PARTS QTY. SPI PART Nr. Nr. BACKGLASS PARTS QTY. SPI PART Nr.
i* Glass (Tempered) 25.906" X 19.187" X .125" 1 660-5038-02 iv* Bottom Plastic Lift Channel - 26" 1 545-6313-01
ii* Indiana Jones• Film Art (#A4) 1 830-52A4-00 v* Plastic Edging (Left/Right) - 18-1/8" 2 545-5018-14
Top Plastic Channel - 26" Items i-v are secured to Item i by: 3M Tape (Double-Sided), 12" (Qty. 1) (626-5080-00)
iii* 1 545-5018-15 Note: Only 9" required, sold in 12" lengths only.
(ASM. REF. 515-5450-00-A4 , Items i-v)

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 &DELQHW3DUWVJ 6ZLWFKHVF
)RU%DFNER[3DUWVVHH
WKHSUHYLRXVWZRSDJHV
15
Qty. 2

7 13
Item 11: Shown Broken
View for Clarity
29
11
9L
14
12
5 8 9R
Qty. 2 View of the back of the Cabinet with the Backbox in the down position.

3S
10
5 12
17

4T
16 24 Qty. 2

18 1

30G
Item 30E
(Power On/Off Switch)
is located under the Cabinet
(Front Right) directly below the 30F
Power Box (in the Cabinet).
30D 17
Qty. 4

7DNH1RWH
Item 2 Ordering Note:
2 Leg comes with Leveler.
Leveler can be purchased
separately. Leg cannot be 21 * An asterisk ( * ) indicates item(s)
ordered WITHOUT Leveler
(see Parts Table below, Item 2). are not noted in the pictorials.
18
J
6HF3DUWV,G

Legend Note: Items noted with a

19 Power
19
Qty. 2
Interlock
Switch
cyan square are Cabinet Parts.
Items noted with a white square F
are Switches.
20B-R-R-G View of the Coin
20 Door (Item 17) open.

Nr. CAB. PARTS & SWITCHES QTY. SPI PART Nr. Nr. CAB. PARTS & SWITCHES QTY. SPI PART Nr.
1 Screened Cabinet Indian Jones• (No Parts) 525-5395-15P-A4 7 Rear Glass Channel 20-3/8" Length 1 545-5038-00
2 Black Leg with Leveler Asm. 4 500-5921-50 8 Plastic Channel 42-5/8" Lg. (Left/Rt.) 2 545-5017-00
Item 2 is secured by: Leg Bolt Back Plate (535-5703-00) and Leg Bolt 3/8" X 16 X 2-1/2"
Hex 5/8" Hd. (2/per) (231-5001-01) Leg Leveler ONLY (3/8"-16 X 3") (500-5017-00). 9L Side Armor (Left) with Button Guard 1 535-9596-00
9R Side Armor (Right) with Button Guard 1 535-9596-01
3S Start Button (Green Round) with Sw. + Lamp 1 500-6388-44-TL Items 9L & 9R are secured @ front & side by: Pem Stud 1/4 X 1" Flange Head Black
4T Tournament Button (Yel. Sq.), w/Sw. + Lamp 1 500-6587-06-TL Tamper Proof Black (Qty. 5/per) (237-6173-05); @ rear (backbox) by: #10-24
(Qty. 1/per) (237-6116-01), 1/4-20 Flange Nut (Qty. 1/per) (240-5300-00) and #8 X 1/2" T20
Item 3S & 4T includes the Switch & Lamp (No Wiring; desolder old wiring where X 1" Sq. Neck
required). Switch or Bulb replacement: ! "
TWIST LOCK (-TL) >> not snap-in << Carrg. Bolt Black (Qty. 1/per) (231-5021-00) and #10-24 Hex Nut (Qty. 1/per) (240-5202-00)
Assembly Parts Included : Microswitch (180-5174-00); #555 Wedge Base Clear Bulb Front Molding (Black) < NO BUTTON HOLE >
(165-5002-00); If 4T is not desired, use optional Button Plug Black (500-6566-00). 10 1 500-6882-02-00
Requires 3-Lug Terminal Strip (055-5204-03) and Diodes, 1N4004 (Qty. 2) (112-5003-00) Item 10 includes: Self-Adhesive Foam Rubber 3/8" X 3/16" X 20-3/8" (3’) (626-5001-00)
inside cabinet under button(s) for Lamp Operation (Diode for Switch, located on Switch.) Items 10 works with Item 22 (next page) ONLY.

Flipper Button (Red) Assembly (No Switch) 11 Playfield Glass (Tempered) 21" X 43" X 3/16" 1 660-5001-00
5 2 500-5026-32
Item 5 is secured by: Pal Nut for Flipper Button (Metal) (Qty. 2/per) (240-5003-01) 12 Hex Key Allen Wrench 5/16" 1 777-0001-00
Pal Nut inside cabinet secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 1/per) (234-5101-00) Corrugated Tubing Black 1"ø X 2.6’ Lg.
and Washer (Zinc), .187" ID X .875" OD X .048" Thick (Qty. 1/per) (242-5059-00) 13 1 605-5008-03
Above Item 13 covers the Cable Wiring Harnesses going into the Backbox from the Cabinet.
6S Flipper Switch Single Assembly 2 500-6889-01
Assembly Parts Included : Flipper Switch Stack Single (Paliney Contact) (180-5160-01) 14 Roto Lock Male (R2-0055-02) 1 355-5006-01
and Capacitor - Ceramic .05 Mfd 25 volt (130-5001-00) Item 14 is secured by: #10-24 X 1-3/4" Carriage Bolt Square Neck (Qty. 2) (231-5022-00),
Item 6S/6D are secured to Cab. by: #6 X 1-1/4 SHWH AB (Zinc) (Qty. 2/per) (237-5959-00) #10-24 Nylon Stop Nut (Qty. 2) (240-5206-00) and
#10 Washer, 7/32" ID X 1/2" OD X 1/16" Thick (Qty. 2) (242-5003-00)
6D Flipper Switch Double Assembly 0 500-6890-01 15 Roto Lock Female (on Backbox) 1 355-5006-02
Assembly Parts Included : Flipper Switch Stack Double (Paliney Contact) (180-5164-01)
and Capacitor - Ceramic .05 Mfd 25 volt (130-5001-00) 16 Ball Shooter (Plunger) Assembly 1 500-6146-00-04
Item 6S/6D are secured to Cab. by: #6 X 1-1/4 SHWH AB (Zinc) (Qty. 2/per) (237-5959-00) FOR A BREAKDOWN OF PARTS SEE: Sec. 4, Chp. 2, Drawings for ... Assemblies...
PARTS TABLE & VIEWS CONTINUED ON THE NEXT PAGE. :

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
030703
3DJH /RFDWLRQ
 &DELQHW3DUWVJ 6ZLWFKHVF&RQWLQXHG
Qty. 1
per side 5
Switch
9R 22 9L 3S
(Lamp
inside)

16 See previous 3S
6S page for open
view of Coin
5 Door 5
Qty. 1 17 4T
per side
if used
6S 23 Qty. 2 6S Switch
4T (Lamp
inside)
Enlarged 19 Power
Interlock
Inside Switch
Cabinet Lamp Diodes on
View of Terminal Strip
Items 5 & 6S, 1 below button(s).
Flipper Button
and Flipper 20 20B-R-R-G 21 25
Switch (Stack) Enlarged Inside Cabinet View
Single Asm. of Items 3S, 4T and 25 (25B, 25C,
25H & 25W), Plumb Bob Tilt Switch.
32 33
30 25C
34 25
31
30J Item 30D
(Power On/Off Switch) is located under the
30A 30i Cabinet (Front Right) directly below the
Qty. 11 Power Box (under the Cabinet).
35 25B
28 29
25H
Always keep your
Qty. 3 Service Game Manual
in the Game Cabinet
so you’ll always know
36 where it’s at!

30E
26R 26L
25C 25W
27
Thumb-Screw
included with
Plumb Bob only.
Enlarged Inside Cabinet View of
30F
Items 30: Power Box (30A), Service
Outlet (30E), Fuse (30i) and Fuse
Holder (30J).
7DNH1RWH
IInside Cabinet View without the Backbox or Playfield. square J
Legend Note: Items noted with a cyan
F
are Cabinet Parts. Items noted
with a white square are Switches.

Nr. CAB. PARTS & SWITCHES QTY. SPI PART Nr. Nr. CAB. PARTS & SWITCHES QTY. SPI PART Nr.
9 PARTS TABLE & VIEWS CONTINUED FROM THE PREVIOUS PAGE. 27 Transformer 5.7VAC (with Ballast Winding) 1 010-5012-01
17 Coin Door 2-Cht $V Up-Stk. 4-Button Bracket 1 501-5018-172 Item 27 is secured by: 1/4"-20 X 5/8" PPH MS (Zinc) (Qty. 4) (237-5854-00) and
Item 17 is secured by: 1/4"-20 X 1-1/4" Carriage Bolt Square Neck (Qty. 4) (231-5003-00) 1/4" Split Lock Washer (Qty. 4) (244-5000-00)

6HF3DUWV,G
1/4"-20 Flange Nut (Qty. 4) (240-5300-00) and Fend Washer 1/4" I.D. X 1" O.D. (Qty. 3) Woofer (Speaker) Grill 7" X 7"
28 1 545-5072-03
Woofer 8" ø Round 8010 4:
(242-5009-00) Note: For Coin Door other than USA call Technical Support for SPI Part Nr.

18 Lock 7/8" Barrel, 435X, Offset Cam 1 355-5021-03K 29 1 031-5007-01

Items 28 & 29 are secured by: #6-32 X 1-1/4" Fin Shank Screw (Qty. 4) (237-5883-00) and
Coin Door Switch (USA) (Happ) 2 180-5024-01 #6-32 Keps Nut (Qty. 4) (240-5008-00)
19 ALT. SW.: 19C: Coin Door Switch (USA) (Coin Control) (180-5024-00) Power Input Box Asm. + Univ. Cable 1 515-5360-08
ALT. SW.: 19J: Coin Door Switch ( ¥ Japan) (180-5091-00)
30A: Power Box (No Parts) Mounting Frame (535-5932-00)
4-Button Bracket (for Service Menu Buttons) 1 535-6860-04 30B*: Line Filter (150-5000-00)
SWITCH: 20B: Push-Button Service Switch (Black) (180-5192-00) 30C*: Varistor* TNR159211KM (Domestic) (150-5001-00)
20 SWITCH: 20R: Push-Button Service Switch (Red) (Qty. 2) (180-5192-02) or Varistor TRM15G431KM (Euro) (150-5002-00)
SWITCH: 20G: Push-Button Service Switch (Green) (180-5192-04) SWITCH: 30D: On/Off Rocker Switch + Bracket Assembly (515-7085-00)
30D incl.: Switch, APEM R2101C5NBB (180-5001-03) + Bracket (535-8318-00)
Ordering Note: Securing hardware for switches included. Decal in kit sold separately. 30 30E: Service Outlet (3-Prong / US) (180-5008-01) / International N/A
Power Interlock-Memory Protect Switch Asm. 30F: Line Cord 10’ ROJ 3" + Ring Terminal Asm. (515-6566-00)
21 1 500-5808-05 30G: Recessed (Black) Cup (rear of Cabinet) (545-5122-00)
Assembly Parts Included : Mounting Bracket (535-9794-00), Power Interlock (Playfield) 30H*: Snap Bushing 9/16" (White) (280-5001-01)
Switch (180-5136-00) and secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2) (234-5101-00) 30i: Fuse 8 Amp 250V Slo-Blo (Domestic) (200-5000-05)
Front Molding Lockdown Asm. or Fuse 5 Amp 250V Slo-Blo (International) (Qty. 2) (200-5003-00)
22 1 500-6881-00 30J: Fuse Holder (205-5001-00)
Item 22 is secured by: #10-24 X 1-1/4" Carr. Bolt (Qty. 2) (231-5012-00) and
#10-24 Keps Nut (Qty. 2) (240-5207-00) Universal Cable & Jumper Caps (all voltage variations): See Sec. 5, Chapter 3, Page 102.

23 Lockdown Spring (connected to handle) 1 265-5008-00 31 Cash Box Plastic Bottom 1 545-5090-00
Item 23 is secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 1) (234-5101-00) 32 Cash Box Cover (Validator) 1 535-5013-03
and #10 Washer, 7/32" ID X 1/2" OD X 1/16" Thick (Qty. 1) (242-5003-00)
33 Cash Box Lock Bracket (U-Wire) 1 535-7562-00
24 Grills 2-1/2" X 18" (on Back & Bottom) 2 545-5072-02 Item 33 is secured by: #8 X 5/8" HWH AB (Green) (Qty. 2) (234-5102-04)
Plumb Bob Tilt Switch Indivual Parts Only Ind. Parts Only Large Hair-Pin Clip
25B: Bracket for Hanger Wire (535-5221-00)
34 1 535-7772-00
25 25C: Contact Wire Form (535-7563-01) 35 Clamps [Multiple Sizes] 12 040-5000-XX
SWITCH: 25H: Hanger Wire (535-5319-02) Item 35 is secured to Item 1 by: #8 X 1/2" SHWH AB (Zinc) (Qty. 1/per) (234-5101-00)
25W: Plumb Bob Weight (535-5029-00) (includes Thumb-Screw) For following sizes, replace -XX with: 3/4" Single = -08 (Qty. 9); 1-1/2" Single = -10 (Qty. 3)
Item 25B is secured to Cabinet by: #6 X 5/8" SHWH AB (Zinc) (Qty. 4) (234-5002-00)
36 Zip Cable Tie (Screw Down Style) 3 040-5005-00
26L Slide & Pivot Support Bracket (Left) 1 535-5989-00 Item 36 is secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 1/per) (234-5101-00)
26R Slide & Pivot Support Bracket (Right) 1 535-5990-00 37† Meter +12VDC with Bracket Optional opt. G-0053-013-102
Items 26L & 26R are secured by: #10-24 X 1-1/4" Carriage Bolt Square Neck Black † Meters (Diode included) are optional and were not included in this Pinball Machine. Order
(3/per) (231-5012-00) and #10-24 KEPS Nut (3/per) (240-5207-00) without the bracket use G-0053-013-102A. More information or Qs? Call Technical Support.

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 0DLQ3OD\ILHOG7RS Page
86
0LVFHOODQHRXV3DUWVFDQG%UDFNHWVJ 4
YEL Pages
Nr. THE PLAYFIELD QTY. SPI PART Nr. 84–85

Main P/F Screened w/ Inserts & NO Parts 1 830-5100-A4 4

P/F P/F Complete w/ Inserts & ALL Parts 1 505-6004-A4-A4 F. ORG 4
Page
79 F. ORG

Nr. MISC. PARTS (ABOVE) QTY. SPI PART Nr. 8

1 Arch (Black Metal) [ no Forks ] 1 535-8392-01
Item 1 is secured to Item 9 below by: #10-32 X 5/16" PFH U/C MS (Zinc) (Qty. 2) Qty. 4
(237-6013-00) Usage Note: When replacing the Arch, order new replacement Nelson Qty. 3
Protect Strips 7-5/8" (not included) (Qty. 2) (545-5212-04; use -02 for 8-9/16" size)
For Decals, see Playfield Top - Plastics Kit, Decals & Mylar Kits. 8
Inst. Card [Eng./Spanish] Indiana Jones• Pages 13 Page
2 1 755-51A4-12-Y 74–75 83
Note : Visit www.sternpinball.com for a PDF copy of the Game Instruction Card which will
also have any translated Instruction Cards made for this game. Find Game Link or Archives.
Spanish 755-51A4-12-Y; German 755-51A4-03-Y; Italian 755-51A4-04-Y; French 755-51A4-05-Y.

3A Coin Card (2-Sided) USA 10 Default 1 755-5400-11-Y 5B

3B Coin Card (2-Sided) USA 5 1 755-5400-08-Y 14
11
3C Coin Card (2-Sided) Blank for Custom 1 755-5400-04-Y
For Coin Card views, see below or online : http://www.sternpinball.com/coinagecards.shtml
Ordering Note : If this is a non-US Game, Coin Card(s) Part Numbers provided will differ. 5B 6
3A 5A
12 15
3C Pages
70–71 Sakara Stone
(Not Shown)
1 3C 5B secured over
Item 12
Pages
2 3A 76–77 Qty. 2
6
16
8
download other
download other coin
coin
card options,
card options, click
click 3B
www.sternpinball.com!
www.sternpinball.com!
4 Light Cover w/ tabs (Multi-Colors) 5 550-5031-XX
Replace -XX in the part number with -02 (xRed); -06 (xYellow); -10 (x Fluor. Orange)
Item 4 (over slingshots) is secured by: #6-32 X 1/2" PPH Sems (Zinc) (Qty. 2) 11 8
(232-5202-00), #6-32 NS Nut (Qty. 2) (240-5005-00) and #6 Washer (Qty. 3) (242-5001-00)
Items also are sec’d by: See Main Ramp Asm. or Back Panel Asm., Pages 84 – 86.

5A Bmpr. Cap (Orange + Bracket Holes) 1 550-5057-07-A4

5B Bumper [Pop] Cap (Multi-Colors) 3 550-5057-XX
Replace -XX in the part number with -04 (xGreen); -05 (x Blue); -06 (xYellow)
Items 5A & 5B are secured by: #4 X 3/4" PRH (Zinc) T-25 (Qty. 2/per) (237-5873-00) 6 6
6 Light Reflector (Silver Plst.) REF540N 4 545-5409-01 11
Ordering Note : #555 Wedge Base Bulb (165-5002-00) (Qty. 1/per);
Wedge Base Socket (Laydown) (077-5026-01) (Qty. 1/per) (views on Page 62)

7 Bubble Level Assembly 1 500-6815-00

Assembly Parts Included : Level .8mm Empire #0224 (545-6001-01) or Level Mount
(545-6068-00). Flange secured by: #6-32 X 1/4" PPH MS (no Sems) Zinc (237-5500-00)
and #6-32 Keps Nut (240-5008-00) Item 7 is secured to the Wood Rail by:
4 4
6HF3DUWV,G

#6 X 1-3/4" PPH AB (Zinc) (Qty. 2) (232-5009-00) RED RED

8 Pinball (Steel) 1-1/16" ø 13 260-5000-00
7
Nr. MISC. BRACKETS (ABOVE) QTY. SPI PART Nr. 8
9 Bracket, Playfield Hanger 2 535-8385-00
Item 9 is secured to the Playfield (P/F) by: #8-32 X 7/8" Unslotted HWH MS Zinc
(Qty. 2/per) (237-5890-00) and #8-32 T-Nut (Qty. 2/per) (240-5101-00) 10 8
10
10 Bracket, Arch Retaining (Hold-Down) 2 535-8394-00
Item 10 is secured to the P/F by: #8 X 1/2" SHWH AB (Zinc) (Qty. 3/per) (234-5101-00)
Bracket, Ramp Mounting
8
11 3 515-6508-00
Item 11 is secured to the Wood Rail by: #6 X 1/2" PTH A (Zinc) (Qty. 2/per) (237-5809-00)
For Hex Spacers sizes, other hardware & locations, see Main Ramp Asm., Pages 84 – 85.

12 Bracket, Sakara Stone Support 1 535-0210-00

Item 12 is secured to Item 5A by: #8 X 3/8" PPH MS Ext. Sems (Zc) (Qty. 2) (232-5301-00)
Bracket, Ark Front Protect 1 535-0200-00
13 Bumper BLUE Pad (3.5" X .75") 9 9
1 626-5083-00
Item 13 is secured by: #8 X 1/2" PPH MS (Zinc) (Qty. 2) (237-5602-00)

14
Bracket, Plate (Newton Ball)
Wire Form (Newton Ball Retention)
1 535-0197-00 7DNH1RWH
1 535-0196-00

JFare
Item 14 is secured under the P/F by: #6-32 T-Nut (Qty. 1) (240-5002-00), #8 Washer (Qty. Legend Note:
1/per pem) (242-5005-00) and #8-32 Nylon Stop Nut (Qty. 1/per pem) (240-5102-00) and Items noted with a white square are Misc. Parts (Above).
is secured above the Playfield by: #6-32 X 1/2" PFH MS (Zinc) (Qty. 1) (237-5918-00) Items noted with a cyan square Misc. Brackets (Above).
Item 14 (Wire Form) requires: Rubber Sleeve .875" (Black) (Qty. 2) (545-5308-875)

2SWLRQDO .LWV DYDLODEOH WKURXJK \RXU 'LVWULEXWRU

Nr. MISC. MOLDED PARTS QTY. SPI PART Nr.
15 Sakara Stone 1 880-5102-01 3LQEDOO /RFDWLRQ 0DLQWHQDQFH 6WDQGDUG .LW $
Item 15 is secured to Item 12 by: #6-32 X 5/8" PPH (Qty. 2) (232-5203-00) and
#6 Washer (Qty. 2) (242-5001-00) Kit includes : 8 oz. Novus Wax #2 Fine (Red) (675-0003-01), Cloth, Rubber Rings (used
above playfield), Bulbs (Bulb quantities vary and is limited to 25 per type), Fuses (1/per type)
16 Grail Cup 1 880-5101-00 and 4 Pinballs. Note: Quanties, sizes and contents subject to change without notice.
Item 14 is secured to plastic by: #6-32 X 3/8" PPH MS Ext. Sems (Zinc) (Qty. 2)
(232-5201-00) and #6 Washer (Qty. 2) (242-5001-00)

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 0DLQ3OD\ILHOG%RWWRP
0LVFHOODQHRXV3DUWVJDQG%UDFNHWVJ
Page
65
Nr. THE PLAYFIELD QTY. SPI PART Nr.
8 Main P/F Screened w/ Inserts & NO Parts 1 830-5100-A4
5 P/F P/F Complete w/ Inserts & ALL Parts 1 505-6004-A4-A4
5
Nr. MISC. PARTS (BELOW) QTY. SPI PART Nr.
1 Insulation Fiche Paper (under Lower Flippers) 2 545-5721-00
1 2 PCB, OPTO Transceiver Amplifier 1 520-5239-01
Page
Page
66 67 1 Page
Item 2 is secured by: #6 X 3/4" SHWH AB (Zinc) (Qty. 4) (234-5003-00)
Application Note : Required for OPTO Transceiver Pairs (500-6775-00) listed on the next
64 page (... Switches). See Section 5, Chapter 4, (Yellow Pages) PCBs, Pages 130 – 131.
Page Page
3 PCB, Lamp (X20 #555 Wedge Base) 1 520-5287-00
68 68
Item 3 is secured by: 1" Slf. Rtn. Plastic Spacer White (Qty. 5) (254-5007-06) and
#6 X 1-1/2" PPH (Zinc) (Qty. 5) (232-5007-00)
More Details : See Section 5, Chapter 4, (Yellow Pages) PCBs, Pages 132 –134.

4 Relay + Conn. Assemly 2 500-6700-00

Item 4 is secured by: #6 X 1/2" SHWH AB (Zinc) Red (Qty. 2/per) (234-5001-02)
3 For more details on Item 6, see Sec. 5, Chapter 1, Backbox Wiring, Page 91.
Individual Part Reference Only: Relay Picker #PC113-2C-C1-24D-LD-X (190-5004-00)
14 6A Pages
132– 3A 250v Slo-Blo Fuse 2 200-5000-08
134 5 Fuse Clip Holder (Socket)
14 2 205-5000-01
14 8
Item 5 is secured by: #6 X 1/2" PPH AB (Qty. 1/per) (237-5805-00)
Note: Item 5, Fuse Clip Holder (Socket) 205-5000-01 is part of a set of 12 (205-5000-12).
You can order them as individuals (...-01) or a set of 12 (...-12).
Pages
76–77 6A Diode Terminal Strip 2-Lug (810) Isolated 3 055-5203-00
6B Diode Terminal Strip 3-Lug (813) Isolated 2 055-5204-03
6C Diode Terminal Strip 5-Lug (824) Isolated 1 055-5204-05
Items 6A–6C are secured by: #6 X 3/8 HWH AB Zinc (Qty. 1-2/per) (234-5000-00)
14 6A Note: 1N4004 Diodes (112-5003-00) are used in all Diode applications.
1N4001 Diodes can be used for Switches and/or Lamps.
Terminal Strip/Fuse Decals A–E REV B 1 820-6221-A4
7* Terminal Strip/Fuse Decal F REV A
6A 1 820-6221-A4F
13 Note: For Decal Descriptions & Locations, see Playfield Terminal Strips, Fuses & Misc.
6B 4 Wiring Descriptions & Locations, Section 5, Chapter 2, Playfield Wiring, Pages 96 – 97.
6B
Nr. MISC. BRACKETS (BELOW) QTY. SPI PART Nr.
8 Bracket, Playfield Support Slide 2 535-6862-05
Pages
70–71 14 Item 8 is secured by: #10 X 1/2" HWH A (Zinc) (Qty. 2/per) (237-5817-00),
#8-32 X 5/8" SHWH Swage (Zinc) Wax (Qty. 1/per) (237-5975-03) and
#8-32 T-Nut (Qty. 1/per) (240-5101-00)
12 Bracket, Edge Slide (Extended)
Page 9 2 535-5988-01
82 Item 9 is secured by: #4 X 1/2" PFH (Zinc) (Qty. 5/per) (237-5840-00) and
14 #8-32 T-Nut (Qty. 2/per) (240-5101-00)

10 10 10 Bracket, Pivot Pin Welded Assembly 2 500-5329-03

Page Item 10 is secured by: #8-32 X 5/8" SHWH Swage (Zinc) Wax (Qty. 2/per) (237-5975-03)
Pages 131
4 74–75
11 Bracket, Back Panel Mounting 2 535-8964-00

6HF3DUWV,G
2 Item 11 is secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2/per) (234-5101-00) and
6C #8-32 T-Nut (Qty. 2/per) (240-5101-00)
For a 3D View : See Section 4, Chapter 2, (Blue Pages) Drawings for ..., Page 86.

Page Page 12 Bracket, 2-Position Switch 1 535-0178-00

69 69 Item 12 is secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2) (234-5101-00)
Pages
80–81 Use 511-5112-00 to include : Switch (180-5178-00) and Switch (180-5179-00)
14 14
13 Bracket, Hole Edge Protect 1 535-0191-00
14 Tie Post (White Nylon) 3-1/2" 11 545-5253-01
Item 14 is secured by: #6 X 5/8" SHWH AB Green (Qty. 1/per) (234-5002-00) and
wiring with Cable Tie, 5-1/2" (Qty. 1/per) (040-5001-02)

14 Page 14
72
14
11 Page
73
11
9 7DNH1RWH 9
* An asterisk ( * ) indicates item(s) are not noted in the pictorials.
Legend Note:
J are Miscellaneous Parts (Below).
Items noted with a black square
Items noted with a green square J are Misc. Brackets (Below).
2SWLRQDO .LWV DYDLODEOH WKURXJK \RXU 'LVWULEXWRU
3LQEDOO /RFDWLRQ 0DLQWHQDQFH 'HOX[H .LW $
Deluxe Kit includes : Pinball Location Maintenance Standard Kit as described plus a
quanity of Flipper Rebuild Kits. Note: Quantity varies which equals the same quantity of
flippers used in this game. 9
THIS GAME KIT INCLUDES (2) FLIPPER REBUILD KITS 9

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 3OD\ILHOG7RS6ZLWFKHV $ERYH F
RQ*DWHV6SLQQHUV 6WDQG$ORQH
Nr. SWITCHES QTY. SPI PART Nr.
Exit Gate Assembly (on Ramps) 3 Ind. Parts Only
Individual Parts Only : Switch (Qty. 1/per) (180-5087-00), Switch Body Protect
Plate (Qty. 1/per) (535-6539-00), Diode 1N4004 (Qty. 1/per) (112-5003-00), C-39
#2-56 X 1/2" Uns. Serr. HWH #4 Head TR3 Black (Qty. 2/per) (237-5937-02), A-60
A-# Gate Bracket (Qty. 2) for A-48 & A-60 (535-7756-01) and Wire Form (.63" Bottom)
for A-48 & A-60 (Qty. 2) (535-7755-02) Gate Bracket for A-49 (535-6303-02) and
Wire Form for A-49 (535-6304-03),
(ASM. REF. ONLY 515-6556-04 and 511-5148-00 on Shooter Ramp) A-48
Switch (for Plastic Ramp Wire Gates) 3 180-5087-00
Switch Matrix Numbers 48, 49 & 60 C-40
Also see Section 4, Chapter 2, (Blue Pages): ... Ramp Assemblies, see Pages 83 – 85.
B-14
)URQW 9LHZ
*DWH %UDFNHW RQ
6NLOO 6KRW 5DPS
3DJH  
A-49

B-6
A-49
Switch

Roll-Under Gate : 9 Spinner

Mounting
Mounting Bracket Bracket
535-6303-02 9 Wire Form
535-6304-03

A-48 B-6
A-60 535-7756-01
Bracket B-14
Switch
Switch

A-48
6HF3DUWV,G

A-60
Bottom Width
535-7755-02 = .63" Switch

Bracket
Roll-Under Gate :
Mounting Bracket
535-7756-01
Wire
5HDU 8QGHUVLGH 9LHZ Form

Spinner & Switch Assembly 1 Ind. Parts Only

Individual Parts Only : Switch (1-1/4" Actuator Blade) (180-5010-04),
Spinner Mounting Bracket (535-0179-00) and Spinner Target Sub-Assembly
B-# (515-7088-00) Note: Individual Decals (820-6410-XX) are not available
individually, ordering of kit is required (Kit: 802-5001-A4). For all pieces, see
Playfield Top - Plastics (Screened & Clear) Kit, Decals* & Mylar* Kits, Page 51.
(ASM. REF. 511-5113-00)
Switch (1-1/4" Actuator Blade) 3 180-5010-04
Switch Matrix Numbers 6 & 14 H[DPSOH
C-# Transceiver OPTO PCB Asm. with 15" Leads 4 500-6775-01 "A-#" means, it is Item Number A-# in the Part Table. The "-#"
Switch Matrix Numbers 39 & 40 indicates more than 1 switch is present. So it is replaced with the
Application Note: Pairs required per switch and an OPTO Transceiver Amplifier PCB Switch’s "Switch Matrix Number" (e.g. A-48, Item A Switch and
(520-5239-01). See Section 5, Chapter 4, (Yellow Pages) PCBs, Pages 130 – 131.
one of the Switches referenced is from Switch Matrix Number 48).
Also see Section 4, Chapter 2, (Blue Pages): ... Ramp Assemblies, see Pages 83 – 85.

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 3OD\ILHOG%RWWRP6ZLWFKHV %HORZ J
RQ$VVHPEOLHV 6WDQG$ORQH
Page
65 Nr. SWITCHES QTY. SPI PART Nr.
G-18 U-22 D-23 Switch (for Shooter Lane) 1 180-5157-00
G-19 T-21 Associated Part Not Included : Switch Mounting Bracket (535-6173-00)
Bracket secured to Playfield by: #6 X 1/2" SHWH AB (Zinc) (Qty. 2) (234-5001-02)
G-20
D-23 Also see Section 4, Chapter 2, (Blue Pages): Shooter Lane Switch Assembly, Page 64.
Page
66
T-21 E-# Sw., Roll-Over Standard Force (Left Mnt.
Style) 2 500-6227-03
H-D10 Page U-22 Switch Matrix Numbers 13 & 58
67 H-D12 F-# Sw., Roll-Over Std. Force (Right Mount Style) 6 500-6227-04
Page
64 Bracket secured to Playfield by: #6 X 1/2" SHWH AB (Zinc) (Qty. 2/per) (234-5001-02)
Switch Matrix Numbers 24, 25, 28, 29, 38 & 64
Page Page
F-24 68 68 F-29 G-# Switch (Roller Actuator, Lite-Force) 7 180-5119-02
Associated Parts Not Included : Heat Shrink Tubing 1/8" ø PUI-24 (Qty. 1" per)
J-26 J-27 (605-5006-00) and Diode 1N4004 (Qty. 1/per) (112-5003-00)
F-25 F-28 Item G-# is secured by: #2-56 X 1/2" Unslt HWH #4 Hex TR3 Blk (Qty. 2/per) (237-5937-02)
Also see Section 4, Chapter 2, (Blue Pages): 5-Ball Trough Assembly, Page 65.
J-26 J-27 Switch Matrix Numbers 18, 19, 20, 50, 51 & 64

H-# Switch (End-of-Stroke), Stack (Blade) 2 180-5149-00

Item H-# is secured by: #6-32 X 5/8" SHWH Swage (Serr.) Zinc (Qty. 2/per) (237-5976-04)
Also see Section 4, Chapter 2, (Blue Pages): ... Flipper Assemblies, Pages 66 – 67.
Dedicated Switch Numbers D10 & D12
P-10 i-# Switch Asm., Stack (Blade) (for Pops) 4 515-6459-09
Assembly Parts Included : Switch (180-5015-04 or -05), Sw. Mntg. Bracket (535-7342-00),
P-9 Pages Spoon Actuator (545-5610-02), Switch Body Protect Plate (535-7344-00), Diode 1N4004
76–77 (Qty. 1/per) (112-5003-00) and #6-32 X 3/4" HWH Zc (Qty. 2/per) (237-5976-05)
P-8 P-1 Bracket secured to Playfield by: #8 X 1/2" SHWH AB (Z) (Qty. 2) (234-5101-00)
Also see Sec. 4, Chapter 2, (Blue Pages): Bumper Switch Individual Parts..., Pages 70 – 71.
P-7 N-11 P-2 Switch Matrix Numbers 30, 31, 32 & 33

P-3 J-# Switch, Stack (Blade) 4/pr. 180-5054-00

N-12 Associated Parts Not Included : Switch Body Protect Plate (Qty. 1/per) (535-5045-00) and
P-4 Diode 1N4004 (Qty. 1 for every 2 connected together) (112-5003-00)
i-32 G-52 Item L-# is secured by: #6-32 X 5/8" HWH Swage (Ser.) Zinc (Qty. 2/per) (237-5976-04)
P-5 Also see Sec. 4, Chapter 2, (Blue Pages): Slingshot Assemblies (Qty. 2/per), Pages 68 – 69.
Switch Matrix Numbers 26, 27, 46 & 47 (Dual Switches = Slingshots)
O-59 Switch (Eject)
K-45 1 180-5186-01
G-53 L-61 Switch (Inline Wire) DA3 DA3A-BWDF 1 180-5178-00
i-30 i-33 M-62 Switch (Offset Wire) Hp. #951560-00 1 180-5179-00
Pages N-# Switch (Scoop) Happ #95-1128-00 2 180-5183-00
70–71 Switch Matrix Numbers 11 & 12

i-31 O-59 Switch & Target Riveted Asm. 1/2" (Orange) 1 515-7581-07
Asm. Parts Included : Stack Sw. (180-5208-00) and 1/2" Nr. Target Orange (545-5210-07);
Q-41 Use 500-7120-07 to include : Bracket, Switch Mounting (535-0156-00), Anti-Loft Switch
L-62 Back Plate (535-9823-01) & Foam Pad .44" X .44" X .125" Th. (626-5029-00).
Page Q-42 See
L-61 82 previous P-# Switch & Target Riveted Asm. 1" Sq. (White) 9 515-7568-08
G-64 S-63 Q-43 page Asm. Parts Included : Stack Sw. (180-5207-00) & 1" Square Target White (545-5470-08);
Q-55 Use 500-5232-08 to include : Bracket, Switch Mounting (535-6896-00), Anti-Loft Switch
Pages
Q-44 C-40 Back Plate (535-9823-01) & Foam Pad .44" X .44" X .125" Th. (626-5029-00).

6HF3DUWV,G
74–75 J-46 Q-56 Switch Matrix Numbers 1, 2, 3, 4, 5, 7, 8, 9 & 10
Q-57 C-39
J-46 Q-# Switch & Target Riveted Asm. 1" Sq. (Green) 7 515-7568-04
Page J-47 Page Asm. Parts Included : Stack Sw. (180-5207-00) & 1" Sq. Target Green (545-5470-04);
Use 500-5232-04 to include : Bracket, Switch Mounting (535-6896-00), Anti-Loft Switch
69 69
Pages Back Plate (535-9823-01) & Foam Pad .44" X .44" X .125" Th. (626-5029-00).
E-13 J-47
80–81 F-64 Switch Matrix Numbers 55, 56, 57, 41, 42, 43 & 44

R-35 G-50 R-# Switch & Target Riveted Asm. 1" Sq. (Yellow) 3 515-7568-06
Asm. Parts Included : Stack Sw. (180-5207-00) & 1" Square Target Yellow (545-5470-06);
R-36 K-45 G-51 Use 500-6984-06 to include : Bracket, Switch Mounting (535-6896-00), Anti-Loft Switch
Back Plate (535-9823-01) & Foam Pad .4" X .6" X .19" Thick (626-5078-00)
R-37
F-38 Switch Matrix Numbers 35, 36 & 37
E-58 Page O – R Plastic Targets are rivted with : Rivet 1/8" ø X 3/16" (Qty. 1/per) (249-5001-00) and
72 Washer 9/64" I.D. X 5/16" O.D. X .048" Thick (Zinc) (Qty. 1/per) (242-5017-00) and require
Diode, 1N4004 (112-5003-00)
Page
73 S-63 Slotted OPTO Int. PCB (In-Line D/T) 1 520-5251-00
Also see Section 4, Chapter 2, (Blue Pages): Swordsman Assembly, Pages 74 – 75, or see
Section 5, Chapter 4, (Yellow Pages): OPTO Interuptor PCB ... , Page 129.

T-21 Dual OPTO TRANS PCB Asm. 1 515-0173-00

Assembly Parts Included : Dual OPTO Trans. PCB (Qty. 1) (520-5173-00), OPTO PCB
Tube Spacer (Brass) (Qty. 3) (530-5308-02) and Rubber Grommet (Qty. 3) (545-5518-00)

U-22 Dual OPTO REC PCB Assembly 1 515-0174-00

Assembly Parts Included : Dual OPTO Rec. PCB (Qty. 1) (520-5174-00), OPTO PCB Tube
H[DPSOH Spacer (Brass) (Qty. 3) (530-5308-02) and Rubber Grommet (Qty. 3) (545-5518-00)
Items Q-#–R-# are secured by: #6-32 X 5/8" HWH Sw. (Ser.) Zc. (Qty. 3/per) (237-5976-04)
"E-#" means, it is Item Number E-# in the Part Table. The "-#" Also see Section 4, Chapter 2, (Blue Pages): 5-Ball Trough Assembly, Page 65, or see
indicates more than 1 switch is present. So it is replaced with the Sec. 5, Chapter 4, (Yellow Pages): Trough Up-Kicker Dual OPTO PCBs, Pages 103 – 105.
Switch’s "Switch Matrix Number" (e.g. E-13, Item E Switch and Switch Matrix Numbers 21 & 22 Switch Note: Both T & U PCBs required per switch.
one of the Switches referenced is from Switch Matrix Number 13).
If only 1 switch type for the item exists, the Switch Number will be
listed with the Item Number (e.g. D-23, Item D Switch and the Switch
Matrix Number is 23).

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 3OD\ILHOG7RS)ODW5DLOV 5DPSF FR-1
:RRG5DLOVJ%DOO*XLGHVJ
DQG:LUH)RUPVJ
Nr. FLAT RAILS QTY. SPI PART Nr.
FR1 Flat Rail (Full Orbit) 1 535-0064-00
Item FR1 is secured by:„ (Qty. 10), ‹ (Qty. 1) and ™ (Qty. 1) BG-7
FR-3
BG-2
FR2 (Flat Rail) Bracket, Hole Edge Protect 1 535-0191-00 BG-1
Item FR2 is secured by: „ (Qty. 3) For larger 3D view of above Bracket , see Page 78.
BG-6
(Flat Rail) Bracket, Ark Front Protect 1 535-0200-00
FR3 Bumper BLUE Pad (3.5" X .75")
1 626-5083-00
For larger 3D view of above Flat Rail 3 , see Page 79, Items A–B. BG-5
Item FR3 is secured by: P (Qty. 2) BG-5
FR4 Flat Rail (Bottom Arch) 1 535-8393-00 BG-3
Item FR3 is secured by: „ (Qty. 4) BG-4
Nr. WOOD RAILS QTY. SPI PART Nr. BG-6
Wood Rail, 14.563" (Left Top & Bot.)
WF-1
WR1 2 525-5007-71
WR2 Wood Rail (Right), with notches 1 525-5679-00 WR-1
WR3 Wood Rail (Left of Shooter Lane) 1 525-5682-00
Items WR1–WR3 are secured by: #6-32 X 1-3/4" PPH MS (Zinc) (Qty. 16) (237-5804-00)
BG-4
FR-1
Nr. BALL GUIDES QTY. SPI PART Nr.
BG1 Ball Guide (Wire Form, Orbit Left) 1 535-0084-00 BG-4
BG2 Ball Guide (Wire Form, Orbit Top Rt.) 1 535-0085-00
BG3 Ball Guide (Wire Form, Orbit Bot. Rt.) 1 535-0086-00
BG4 Ball Guide, 1" (.12" ø) 4 535-5356-18 WF-4 WF-4 WR-2
BG5 Ball Guide, 1.75" (.12" ø) 2 535-5356-22
BG6 Ball Guide, 1.188" (.12" ø) 5 535-5356-24 Note: Roll-Under
Gates on Ramps.
BG7 Ball Guide, 6.5" (.12" ø) 1 535-5356-27 FR-2 For larger 3D BG-4
BG8 Ball Guide (Return Lane) Plastic 2 550-5037-01 views, see page
references under
BG-6 WF-4 in the parts
table.
Nr. WIRE FORMS QTY. SPI PART Nr.
Wire Form (Newton Ball Retention) 1 535-0196-00 WR-3
WF1 Bracket, Plate (Newton Ball)
1 535-0197-00 WF-2 WF-2
Item WF1 is secured under the P/F by: #6-32 T-Nut (Qty. 1) (240-5002-00), #8 Washer
(Qty. 1/per pem) (242-5005-00) and #8-32 Nylon Stop Nut (Qty. 1/per pem) (240-5102-00)
and is secured above the Playfield by: #6-32 X 1/2" PFH MS (Zinc) (Qty. 1) (237-5918-00)
Item WF1 (Wire Form) requires: Rubber Sleeve .875" (Black) (Qty. 2) (545-5308-875)
WF-3
WF2 Wire Form (on Item BG8 above) 2 535-5642-00
WF3 Wire Form on Roll-Under Gate 1 535-6304-03
WF4 Wire Form on Roll-Under Gate 2 535-7755-02
6HF3DUWV,G

For larger 3D view of above Wire Form WF3 , see Pg. 48, Item A-49 or Page 83, Item 4–2. BG-8 BG-8
For larger 3D view of above Wire Form WF4, , see Page 48, Items A-48 / A-60 or on the
Main Plastic Ramp, Pages 84–85.

WR-1

FR-4

Note: Enter / Exit Scoop (535-7329-01) above

Item FR4 is shown for location reference.
For a 3D view, see Page 65, Item AP-A.
7DNH1RWH
Parts Table Legend Note:
„ #8 X 1/2" SHWH AB (Zinc) (234-5101-00)
™ #8-32 Nylon Stop Nut (240-5102-00)
‹ #8 Washer (242-5005-00)
_ #6-32 X 7/8" Fin Shank Screw (237-5921-04)
a #6-32 X 1/2" PTH A (Zinc) (237-5809-00) into Wood Rail.
Playfield Legend Note:
Items noted with a white square FJ
are Flat Rails or Flat Ramps.
† #6-32 X 1/2" PTH A (Zinc) (237-5809-00) into Wood Rail. J
Items noted with a magenta square are Wood Rails.
P #8 X 1/2" PPH MS (Zinc) (Qty. 2) (237-5602-00) Items noted with a red square
Items noted with a cyan square J
are Ball Guides (Snubber Wires)
are Wire Forms.

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 3OD\ILHOG7RS3ODVWLFV 6FUHHQHG &OHDU .LW'HFDOV 0\ODU .LWV‡
803-5000-A4 Kit #1 (Plastics*) includes: ** 802-5001-A4 Kit (Mylar) includes:
Plastic Sets (830-6073-XX & 830-6087-00) Bumper Area (820-6419-00), Shooter Ramp Exit
(820-6429-00), Scoop Exit (820-6430-00); Main Ramp
Exit (820-5815-00) and Magnet Area (820-6433-00)

**

‡ Attention: No individual Plastic or Decal can be ordered separately,

unless noted otherwise. Plastics & Decals are subject to change
without notice during and / or after production. Shapes and / or
Screening may change. Kit contents subject change (pieces + / –).
Service Bulletin(s) will announce any critical changes, if warranted.
The last 2-digits shown
on plastics or decals are
for reference only.

**

**
-33 -34 -35 -36
-10

**

-08

6HF3DUWV,G
-37

** -03
-39
-42

-43
-38
Plastics & Decals Note:
Key Fobs subject to -31
-06 -40
availability and may or
may not be included in the
plastic set. All designs, -41
shapes and pieces used
subject to change without
-01 -32
notice. Kit contents
subject to change. -00
-29 -07
-09
-30

803-5001-A4 Kit #2 (Plastics*) includes: 802-5000-A4 Kit (Decals) includes:

Plastic (around Ark) Pieces (545-6328-00 & 545-6328-01) Decal Set (820-6410-XX)

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 3OD\ILHOG7RS %RWWRP0HWDO3RVWVF )LQ6KDQN6FUHZVJ $FWXDO6L]H †

#6-32 Thread
#6-32 Thread

#8-32 Thread
Front View Side View

† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.
1 2 3 5 6 7 8A 8B
4

#10-32 Thread

#10-32 Thread

#10-32 Thread
#8-32 Thread
#6-32 Thread

#6-32 Thread

Item 4 Post can use 5/16" I.D. Black Ring, Items 6-8 Posts can use 7/16" O.D. Black Ring,
545-5348-02 or White Ring 545-5348-52. 545-5348-17 or White Ring, 545-5348-67.

Items A & B Note: Typically used to secure Hex Spacers onto the
Items 11-16 & 18 Posts can use a Black A&B Playfield Wood or Back Panel.
Bumper Post Sleeve (Tall)

Bumper Post Sleeve (Tall), 545-5308-00

Item C Note: Quantity 4 on bottom Cabinet Speaker Grill (Qty. 4)
(White, 545-5308-08 or Red, 545-5308-22)
Usually, only Posts which are in the ball path
C (also requires #6-32 Nylon Stop Nut, 240-5005-00).
#6-32 Thread

require a Bumper Post Sleeve. Item D Note: Quantity 3/per on the Coil
------------------------------------------------- D Bracket Welded Assembly (515-5939-00)
Items 12-15 & 18 Posts are typically secured in the Bumper Bottom Assembly (515-6459-04).
by a #10-32 Nylon Stop Nut, 240-5203-00 and
#10 Washer, 242-5010-00 (Item 11 Post use a

#6-32 Thread
#6-32 Thread

#6-32 Thread
#6-32 Thread
#8-32 Nylon Stop Nut, 240-5102-00; Item 16
Post use a #8-32 T-Nut, 240-5101-00).

7DNH1RWH
Items A-D Note:
A-D The "Fins" keep
9 the screw from
Legend Note: turning inside the

F
Items noted with a white square wood hole.
are Metal Posts. Items noted
with a black square are Fin J A B C D
Shank Screws.

#8-32
#6-32 Thread

#8-32 Thread

#6-32 Thread

Tap
#6-32 #8-32
Tap Tap #6-32
#6-32 No Tap
Tap Tap
6HF3DUWV,G

18
10 11 12 13 14 15 16 17
#10-32 Thread
#10-32 Thread
#6-32 Thread

#8-32 Thread
#8-32 Thread

#10-32 Thread

#10-32 Thread

#10-32 Thread

#10-32 Thread

Item 18 Post, for usage

on Spinning Disk Asm.,
see Page 84.

Nr. METAL POSTS QTY. SPI PART Nr. Nr. METAL POSTS QTY. SPI PART Nr.
1 Post [Fasten] #6-32 Thread // Wood Scr. 1 530-5010-02 12 Post [Hex Base] NO TAP // 10-32 Thread 530-5332-00
2 Post [Fasten] #6-32 Thread // #6-32 Thread 36 530-5012-02 13 Post [Hex Bs.] #6-32 TAP // #10-32 Thread 8 530-5332-01
Post [Fasten] #8-32 Thread // #6-32 Thread 14 Post [Hex Bs.] #8-32 Thread // #10-32 Thread 530-5332-02
3 530-5008-00 Post [Hex Bs.] #6-32 Thread // #10-32 Thread
4 Post Brass [Adjustable, Sliding] #8-32 Thread 530-5621-00 15 2 530-5332-03
16 Post [Hex Bs.] #8-32 TAP // #8-32 Thread 530-5332-04
5 Mini-Post Wood Screw (no cut-away) 2 530-5004-01 17 Post [Hex Bs.+Groove] #6-32 TAP // #10-32 Thr. 530-5679-00
6 Mini-Post Wood Screw 530-5004-00 Post [Hex Bs.+Groove] #8-32 TAP // #10-32 Thr.
Mini-Post MS // #10-32 .4" Thread
18 530-5753-00
7 530-5005-01
8A Mini-Post MS // #10-32 .875" Thread 8 530-5005-00 Nr. FIN SHANK SCREWS QTY. SPI PART Nr.
8B Mini-Post Short MS // #10-32 .875" Thread 530-5749-00 A #6-32 X 3/4" Fin Shank Screw 237-5921-02
9 Post [Fasten] #6-32 Thread // Wood Screw 530-5263-01 B #6-32 X 7/8" Fin Shank Screw 1 237-5921-04
10 Post #6-32 Tap // #6-32 Thread 530-5127-00 C #6-32 X 1 " Fin Shank Screw  (4) 237-5883-00
11 Post [Fasten] #6-32 Thread // #8-32 Thread 530-5007-00 D #6-32 X 13/16" Spiral Fin Shank Screw 12 237-5957-00

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 3OD\ILHOG7RS %RWWRP0HWDO3RVWV 3OD\ILHOG7RS %RWWRP
F )LQ6KDQN6FUHZVJ&RQWLQXHG 1\ORQ6WRS.(36+H[7)ODQJH
3DO :LQJ1XWV  $FWXDO6L]H †
2 2 B
† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.

2
2
2 1 2
2 2
2 2
screw 9 Top & Side Views :
5 5 5 5 5
2
8A 13 2
2 N1 K1 H1 T1 F1
2
2 13
8A 2 Nr. NYLON STOP NUTS* QTY. SPI PART Nr.
N1 #6-32 Nylon Stop Nut 65 240-5005-00
screw
2
13 N2 #6-32 N.S. Nut (with 1e4" Hex Body) 240-5010-00
8A screw
2 screw 2 13 screw N3 #8-32 Nylon Stop Nut 13 240-5102-00
2 2 #10-32 Nylon Stop Nut
2 N4 18 240-5203-00
Qty.
D 3/per N5 #10-24 Nylon Stop Nut 2 240-5206-00
Item N5 used with #10-24 X 1-3/4" Carriage Bolt Square Neck Black (231-5022-00) located
2 2 in the Cabinet for the Roto Lock (Male) (355-5006-01).
2 2 13 N6 #4-40 Nylon Stop Nut 240-5303-00
Qty. screw
D 3/per
screw
N7 #4-40 (18/8 Stainless) Nylon Stop Nut 240-5303-01
2 D Qty.
3/per
13 N8 5/16"-18 Nylon Stop Nut 240-5316-00
Nr. KEPS NUTS* QTY. SPI PART Nr.
K1 #6-32 Keps Nut (with Star Washer) 5 240-5008-00
screw
D Qty. 2
3/per 13 K2 #6-32 Keps Nut (with 1e4" Hex Body) 240-5011-00
K3 #8-32 Keps Nut 240-5104-00
15 K4 #10-32 Keps Nut 240-5208-00
screw
15
K5 #10-24 Keps Nut 14 240-5207-00
2
K6 #4-40 Keps Nut 240-5318-00
8A
Nr. HEX NUTS* QTY. SPI PART Nr.
H1 #6-32 Hex Nut (No Star Washer) 4 240-5004-00
H2 #8-32 Hex Nut 240-5103-00
2
2 H3 #10-32 Hex Nut 240-5201-00
H4 #10-24 Hex Nut 2 240-5202-00
screw 2 Item H4 used with #10-24 X 1" Carriage Bolt Square Neck Black (231-5021-00) located in
screw screw the Cabinet for the Side Armor Rear (towards Backbox).

H5 #10-32 X 3e8" Hex Nut 240-5209-00

8A 2 2 8A H6 3e -16 Hex Nut
4 1 240-5315-00
H7 #2-56 Hex Nut 6 240-5301-00

6HF3DUWV,G
H8 7e8"-14 Hex Nut 240-5317-00
screw screw
Nr. T-NUTS* QTY. SPI PART Nr.
2 2 T1 #6-32 T-Nut 54 240-5002-00
T2 #6-32 T-Nut (with Side Cut Off) 240-5002-01
5 T3 #8-32 T-Nut 10 240-5101-00
5
T4 #10-32 (Black Oxide) T-Nut 240-5007-00
T5 #10-32 T-Nut (with Side Cut Off) 240-5205-00
T6 #10-32 X 5/16" 3-Prong T-Nut 240-5204-00
T7 #10-24 T-Nut 240-5200-00
8A
Nr. FLANGE NUT* QTY. SPI PART Nr.
1e " X 20 Flange Nut
F1 4 10 240-5300-00
Item F1 used with 1/4-20 X 1-1/4 Sq. Neck Carriage Bolt Black (231-5003-00) located in the
Cabinet for the SIde Armor (Front) and Pivot Hinges.

Nr. PAL NUTS* QTY. SPI PART Nr.

P1 Plastic Pal Nut (on Flipper Buttons) 240-5003-00
P2 Metal Pal Nut (on Flipper Buttons) 2 240-5003-01
Item 2 Note: Secured to playfield with a #6-32 T-Nut (which can be located above or below
the playfield). Nr. WING NUTS* QTY. SPI PART Nr.
Item 8A Note: Secured to playfield with a #10-32 Nylon Stop Nut (240-5203-00) (located W1 #6-32 Wing Nut 240-5001-00
below the playfield). A #10 Washer 7/32" I.D. X 1/2" O.D. X 1/16" (242-5003-00) is required
between Nut & playfield. W2 #8-32 Wing Nut 240-5100-00
#10-24 Wing Nut
7DNH1RWH W3
W4 1e "-20 Wing Nut
4
240-5211-00
240-5302-00
F are Metal Posts.
Legend Note: 1e "-20 Toggle Wing
W5 4 240-5324-00
J are Fin Shank Screws.
Items noted with a white square * Not Shown: Items N2-N8, K2-K6, H2-H8, T2-T7, P1-P2 & W1-W5
Items noted with a black square

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 3OD\ILHOG7RS+H[6SDFHUVF $FWXDO6L]H †
 
Hex Spacers:

Tap
1e
4 " 3e
8 " 1e"
2
5e
8 " 3e
4 " 7e"
8 1"
1e " 1 2 3A 4A 5 6A 7

† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.
4
H[DPSOH RI %V

#8-32 Thread
8A 11e8" 8B 11e8" with Male #6-32 Thread
1-end, #6-32 Tap on other.
41
9 11e4" 7DNH1RWH
Items 1-33 are 1e4" wide. Items 34-39 are 5/16" wide. With Items 1-3A, 4A,
10 5 & 6A (the tap goes thru the length of spacer). With Items 7, 8A, 9-33 &
15/16" 34-39, the tap is up to 5e8" deep on each end. Note: Items 3B, 4B, 6B
(Not Shown) & 8B (Shown as example of all "B" Styles) all have a #6-32
11 Threaded end, the other end Tapped (same as Items 7-33). 35 11e4"
13e8"
‡ Hex Spacers Not Used in current games may no
longer be available. Choose an available size (+/-)
12 11e2" and compensate with washers or other spacers. 17e8" 36 13e4"
_ Hex(withSpacer Nut 1/5" O.D. X 1/4"-20 BO (254-5042-00) (Qty. 2)
13 15e8" _ Hex Spacer (254-5052-00) (Qty. 4)
Pivot Hinges Item 29L/R, Page 43, Backbox Parts). 37 2"

14 13e4" 42 Item 42 Hex Spacer 1/2" X 1/4" #6-32 M/F (Qty. 0) (254-5049-03)
Item 43 Hex Spacer 1-1/2" X 1/4" #6-32 M/F (Qty. 1) (254-5049-09)

15 42 43

#8-32 Thread
17e8"

16 2"
31e4" 26 27 31e2"
17 21e8" 31e8" 25 28 35e8"
44
18 21e4" 24 29
3" 33e4"
Item 44 Hex Spacer
38 4"
19 23e8" 27e8" 23 30 4" 1.13" X .31" #8-32 M/F
(Qty. 0) (254-5050-00) 39 45/16"
20 31 41e8" Not Used This Game
2 "
1e
2
32 41e4" 34 51e4"
21 25e8" 33 43e8" 40 4.92"
22 23e4" A Standard USA 9 Inch Ruler
is provided on the back cover.
6HF3DUWV,G

Nr. HEX SPACERS QTY. SPI PART Nr. Nr. HEX SPACERS QTY. SPI PART Nr.
1 1e "
4 X 1e4" : #6-32 Tap (both ends) 254-5008-00 19 23e8" X 1e4" : #6-32 Tap (both ends) 2 254-5008-28
2 3e "
8 X 1e4" : #6-32 Tap (both ends) 254-5008-12 20 21e2" X 1e4" : #6-32 Tap (both ends) 1 254-5008-16
3A 1e "
2 X 1e4" : #6-32 Tap (both ends) 11 254-5008-03 21 25e8" X 1e4" : #6-32 Tap (both ends) 254-5008-08
3B* Identical to 3A with #6-32 Thread end 254-5024-03 22 23e4" X 1e4" : #6-32 Tap (both ends) 254-5008-15
4A 5e "
8 X 1e4" : #6-32 Tap (both ends) 254-5008-02 23 27e8" X 1e4" : #6-32 Tap (both ends) 254-5008-31
4B* Identical to 4A with #6-32 Thread end 4 254-5024-02 24 3" X 1e4" : #6-32 Tap (both ends) 254-5008-14
5 3e "
4 X 1e4" : #6-32 Tap (both ends) 14 254-5008-04 25 31e8" X 1e4" : #6-32 Tap (both ends) 2 254-5008-19
6A 7e "
8 X 1e4" : #6-32 Tap (both ends) 1 254-5008-05 26 31e4" X 1e4" : #6-32 Tap (both ends) 254-5008-26
6B* Identical to 6A with #6-32 Thread end 1 254-5024-05 27 31e2" X 1e4" : #6-32 Tap (both ends) 254-5008-27
X 1e4" : #6-32 Tap (both ends) 28 35e8" X 1e4" : #6-32 Tap (both ends) 254-5008-25
7 1" 2 254-5008-06
11e8" X 1e4" : #6-32 Tap (both ends) 29 33e4" X 1e4" : #6-32 Tap (both ends) 254-5008-36
8A 3 254-5008-17
Identical to 8A with #6-32 Thread end 30 4" X 1e4" : #6-32 Tap (both ends) 254-5008-21
8B 254-5024-17
11e4" X 1e4" : #6-32 Tap (both ends) 31 41e8" X 1e4" : #6-32 Tap (both ends) 254-5008-23
9 1 254-5008-11
15/16" X 1e4" : #6-32 Tap (both ends) 32 41e4" X 1e4" : #6-32 Tap (both ends) 254-5008-30
10 254-5008-34 43e8" X 1e4" : #6-32 Tap (both ends)
11 ‡ 13e8" X 1e4" : #6-32 Tap (both ends) 254-5008-33 33 254-5008-29
34 51e4" X 1e4" : #6-32 Tap (both ends) 254-5008-35
12 11e2" X 1e4" : #6-32 Tap (both ends) 254-5008-09
35 11e4" X 5/16" : #6-32 Tap (both ends) 254-5018-09
13 ‡ 15e8" X 1e4" : #6-32 Tap (both ends) 254-5008-13 13e4" X 5/16" : #6-32 Tap (both ends)
13e4" X 1e4" : #6-32 Tap (both ends) 36 254-5018-06
14 4 254-5008-10 37 2" X 5/16" : #6-32 Tap (both ends) 254-5018-07
15 ‡ 17e8" X 1e4" : #6-32 Tap (both ends) 1 254-5008-20 38 4" X 5/16" : #6-32 Tap (both ends) 254-5018-03
16 2" X 1e4" : #6-32 Tap (both ends) 254-5008-07 45/16" X 5/16" : #6-32 Tap (both ends)
21e8" X 1e4" : #6-32 Tap (both ends)
39 254-5018-00
17 254-5008-32 40 4.92" X 5/16" : #6-32 Tap (both ends) 254-5018-04
18 21e4" X 1e4" : #6-32 Tap (both ends) 254-5008-18 17e8" X 3e8" : #8-32 Thread (both ends)
41 530-5285-00

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 3OD\ILHOG7RS+H[6SDFHUVF&RQWLQXHG
1-3/4"

14
2-3/8"
3/4" 7/8"m
19
† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.

5 6B
3-1/8" 3-1/8"
1-3/4" 1/2"
25 1-3/4" 25 3A 1/2"
14 above Plastic

3/4"
14 -06, under Plastic 3A
supports 1-1/8"
under
5 Skill Ramp
8A Plastic -31

1/2"
8A
3/4"
1-1/8" 3A
5/8"
5 3/4" 4B above
5 4B Plastic -34;
2 above
1/2"

5
Plastic -06
under 3A
3/4" 3/4" 5/8" Plastic -34 3A above
3/4" Plastic -10; 1/2"
5 5 4B under
Plastic -39 3A
5
1-7/8" 1-7/8"
3/4"
15 15 1-3/4" 14 above

14 Plastic -14;
under
Spotlight
2-1/2" 20 below
Ramp edge 4B under
20 facing down.
See Pages
Plastic -40
84-85 for view. 5/8"m

8A below
1-1/8" 4B
Ramp edge;
6B above
8A
Ramp edge
1"
1" under
Spotlight
6B 4B
7 7/8"m 5/8"m
7 1/2"

3A

2-3/8" 2-3/8"

19 19
3A above
3A Plastic -03;
under
Plastic -32
1/2"

1-1/4" 1-1/4"
3/4" 3/4"
9 9 5 5

6HF3DUWV,G
3/4" 3/4"

5 5

1/2"
Item 3A Note: Quantity 4 of 11 on the Static Shield
3A located on the Speaker Panel.
5 Item 5 Note: Quantity 2 of 14 on the Display Shield
7DNH1RWH 3/4"
located over the Display Power PCB (in Backbox).

Legend Note:
Items noted with a white square . are Hex Spacers.

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 3OD\ILHOG7RS3ODVWLF3RVWV 6SDFHUVF 0HWDO6SDFHUVJ $FWXDO6L]H †
can use 3/16"
9DULRXV Black Ring,
&RORUV 545-5348-01 or
(White) Ring,
545-5348-51 9DULRXV
&RORUV

† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.
(White) Ring, 545-5348-52
can use 5/16" Black Ring,
545-5348-02 or
can use
Rubber
can use 5/16" can use 3/16" Sleeve
Black Ring, Black Ring, 545-5348-01 or (Short),
545-5348-02 or (White) Ring, 545-5348-51 545-
(White) Ring, 5151-00
545-5348-52
2* 3*
1*

PLASTIC PART COLOR CHART O.D. & I.D. 4*

5 – 11:
Nr. Color Nr. Color Nr. Color Height Shown X 9/32" O.D.
-00 Black -06 Yellow -12 Fluor. Blue X .153" I.D. 1" ‡ 5 – 11 O.D. & I.D.
dimen-
-01 Clear -07 Orange -13 Teal Green sion is
Red
3e
4 " measured
-02 -08 (White) -14 (Gray) 5e
8 " from this
-03 Amber -09 Purple -15 Luminescent 1e "
2 point.
-04 Green -10 Fluor. Org. -16 Gold 3e
8"
1e " 5/ "
-05 Blue -11 Fluor. Green 4 16 1e
2 "
* Items 1 & 5 come in various colors. The "-XX" (the last 5‡ 6‡ 7‡ 8‡ 9‡ 10‡ 11‡
2-Digits in the Part Number), should be replaced with the
desired 2-Digit number from the above Color Chart (may ‡ Items 5 through 11 dimensions are measured from bottom
not be available in every color; other colors used in prior
games may no longer be available.) Call for availability.
to just under the cut-away. Item 33 dimension is measured 12: 1e2 12
from top-to-top of curve. See pictorials with Items 11 & 33. X 1e4" O.D.
X .147" I.D.
13 14 15 16 17 18 19 20 21 22 23 24 25 26
3/16" 1e
4 " 3e
8 " 1e"
2
5e
8" 3e
4 " 7e
8 " 1" 11e8" 11e4" 115/16" 27 1e"
4
1e
8 "
for Natural ((White))
Use 254-5000-06N

O.D. & I.D.

13 – 14 & 16 – 25: 28 1e
2 "
27 – 31:
Height Shown X 3e8" O.D. X .175" I.D. Height
15: Shown
1e X 3e " O.D. X .200" I.D.
4 8 29 9/16" X 1e4" O.D.
O.D. & I.D. 26: X .147" I.D.
1 16" X 3e8" O.D. X .147" I.D.
15/
30 3e
4 "
33‡
6HF3DUWV,G

Note the Part Nr. & 9  GLPHQVLRQ LV PHDVXUHG IURP WKLV SRLQW
1" Material Difference 32 7e
8" 31 11e8"
11e2"
Nr. PLASTIC POSTS & SPACERS QTY. SPI PART Nr. Nr. PLASTIC POSTS & SPACERS QTY. SPI PART Nr.
1e " X 3e " O.D. X .175" I.D. Pls. Spacer (Gray)
1** Top Lane Plastic Mini-Lite Hood (Color) 550-5061-XX 18 2 8 4 254-5000-01
Item 1 typically secured by: #6-32 X 1-3/4" PPH MS (Zinc) (Qty. 2/per) (237-5511-00) and 5e " X 3e " O.D. X .175" I.D. Pls. Spacer (Gray)
Washer 9/64" X 5/16" O.D. X 1/32" (Qty. 2/per) (242-5017-00), if used. 19 8 8 254-5000-14
3e " X 3e " O.D. X .175" I.D. Pls. Spacer (Gray)
2** Mini-Jewel Plastic Post (Clear) 2 550-5052-01 20 4 8 1 254-5000-07
7e " X 3e " O.D. X .175" I.D. Pls. Spacer (Gray)
Item 2 typically secured by: #6 X 3/8" HWH AB (Zinc) (Qty. 1/per) (234-5000-00) 21 8 8 1 254-5000-11
11/16" 1-Groove Plastic Post (Clear) 22 1" X 3e8" O.D. X .175" I.D. Pls. Spacer (Gray) 1 254-5000-04
3** 51 550-5059-01
Item 3 Only : Use Part Number (550-5059-00) for color Black. 23 11e8" X 3e8" O.D. X .175" I.D. Pls. Spacer (Gray) 1 254-5000-06
Item 23 Only : Add the letter " N " for color Natural (if available) or " B " for color Black
4** 1-Groove Jewel Plastic Post (Color) 550-5034-XX
Items 3 & 4 typically secured by: #6-32 X 1-3/4" PPH MS (Zinc) (237-5511-00), 24 11e4" X 3e8" O.D. X .175" I.D. Pls. Spacer (Gray) 3 254-5000-05
#6-32 X 2" PPH MS (Zinc) (237-5513-00) or Post Fastening Screw #6-32 Thread 11e2" X 3e8" O.D. X .175" I.D. Pls. Spacer (Gray)
(Top/Bottom) (Qty. 1/per) (530-5012-02) For view of post, see Item 2, Page 52. 25 3 254-5000-08
26 115/16" X 3e8" O.D. X .147" I.D. Pls. Spr. (Gray) 254-5000-15
5‡ 1e " Self Retain. Plastic Spacer (White)
4 12 254-5007-02 Items 13-26 Only : Spacers may also be Black in color (random from vendor).
6 ‡ 9/16" Self Retain. Plastic Spacer (White) * 254-5007-05 Not Shown and listed for reference only : 254-5000-10: 21e2" X 3e8" O.D. X .175" I.D.
7 ‡ 3e8" Self Retain. Plastic Spacer (White) * 254-5007-01 -13: 5/16" X 1e4" X .147"; -16: 5/16" X 5/16" X .190"; -17: 13e4" X 3e8" O.D. X .175" I.D.
| 8 ‡ 1e2" use -04 | 9 ‡ 5e8" use -00 | 10 ‡ 3e " use -03 |
4 27 1e4" X 5/16" O.D. X .144" I.D. Metal Spacer 1 254-5014-03
11 ‡ 1" Self Retain. Plastic Spacer (White) 5 254-5007-06 28 1e2" X 5/16" O.D. X .144" I.D. Metal Spacer 254-5014-00
12 1e2" X 1e4" O.D. X .147" I.D. Pls. Spacer (White) 254-5000-03 29 9/16" X 5/16" O.D. X .144" I.D. Metal Spacer 254-5014-04
13 1e8" X 3e8" O.D. X .175" I.D. Pls. Spacer (Gray) 2 254-5000-19 30 3e4" X 5/16" O.D. X .144" I.D. Metal Spacer 254-5014-01
14 3/16" X 3e8" O.D. X .175" I.D. Pls. Spacer (Gray) 4 254-5000-18 31 11e8" X 5/16" O.D. X .144" I.D. Metal Spacer 254-5014-02
15 1e4" X 3e8" O.D. X .200" I.D. Pls. Spacer (Gray) 254-5000-02 32 1" X 5/16" O.D. X .144" I.D. Metal Spacer 254-5001-00
16 1e4" X 3e8" O.D. X .175" I.D. Pls. Spacer (Gray) 254-5000-09 33‡ 7e8" Plastic Spacer Support (Dual-Locking) 254-5039-14
PARTS TABLE & VIEWS CONTINUED ON THE NEXT PAGE. :
17 3e8" X 3e8" O.D. X .175" I.D. Pls. Spacer (Gray) 254-5000-12

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 3OD\ILHOG7RS3ODVWLF3RVWV 6SDFHUVF 0HWDO6SDFHUVJ&RQWLQXHG
21 below
3 3 3 25 above
1-1/2"
21 Plastic -38 2
3 Plastic -31 25 7/8"
20
3 3 18 18 3/4"
† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.

3 3 20 above
3 1/2" 1/2"
Plastic -38
3 3 18 X2 above
3 25 Plastic -38
3 1-1/2"
3 25 above

3 3 Plastic -09
23
13 on Swordsman
3 Qty. 2
Gate, see Page 75. 1-1/8"
3 23 above

3 13 Plastic -39
3 1/8"
3
3 3 3
3 3 3
3

3 3
3 3
3 3
22 facing
3 down under 22
Plastic -40
1"

3 3

3 2
3 25 25 above
Plastic -32

Item 3’s 1-1/2"

located
directly on
the
playfield 3
3 on this
game. 3 3
3 3

3 3
1/2"

18
3 3

6HF3DUWV,G
3 3

Item 5 Note: Qty. 2/per on the LED Flash on the Swordsman, in the Skull and Ark, Item 11 Note: Qty. 5 on the Lamp X20 PCB under the playfield,
5 see Section 5, Chapter 4, PCBs, Pages 136–137; Qty. 4 on CPU/Sound PCB. 11 see Section 5, Chapter 4, PCBs, Pages 132–135.

Item 6 Note: Qty. 2 on the on the I/O Power Driver PCB (in Backbox), under Bridges Item 13 Note: Qty. 2 on the Swordsman (Bottom) Assembly, see Item 7 on Pages
6 4 & 5; Qty. 4 per on the OPTO Amplifier PCBs; 13 74–75 to support (offset) the OPTO PCB on the cover bracket.

Item 7 Note: Qty. 5 on the I/O Power Driver PCB, under Bridges 1, 2 & 3 and outside Item 14 Note: Qty. 4 on the Dot Matrix Display (in Backbox);
7 edge support holes; Qty. 4 on the CPU/Sound outside edge support holes; 14
Item 8 Note: Qty. 4 on the OPTIONAL Shaker Motor PCB (in Cabinet); Item 18 Note: Qty. 1 in the Cabinet (Ball Shooter).
8 18
7DNH1RWH 24 Item 24 Note: Qty. 2 supports the Display Controller PCB Warning Cover (in Backbox);
Qty. 1 in the Cabinet (Ball Shooter).
Legend Note:
.
J
Items noted with a (White) square are Plastic Posts & Spacers. 27 Item 27 Note: Qty. 1 on the 4-Ball Trough Guide Plate, see Item 11 on Page 65.
Items noted with a cyan square are Metal Spacers.

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 3)7RS %RW5XEEHU3DUWV%ODFNJ %OXHJ 5LQJV$FWXDO6L]H †
10 11 12 13 14 15

† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.
10 12 14 15
11 13

2 5 7 9 9 7 5 2 Nr. RUBBER RINGS QTY. SPI PART Nr.

3" I.D. Rubber Ring BLACK 545-5348-10
1 3" I.D. Rubber Ring WHITE 545-5348-60
23e4" I.D. Rubber Ring BLK 545-5348-20
2 23e4" I.D. Rubber Ring WHT N/U 545-5348-70
21e2" I.D. Rubber Ring BLK 5 545-5348-09
3 21e2" I.D. Rubber Ring WHT 545-5348-59
2" I.D. Rubber Ring BLACK 545-5348-08
4 2" I.D. Rubber Ring WHITE 545-5348-58
13e4" I.D. Rubber Ring BLK 545-5348-21
5 13e4" I.D. Rubber Ring WHT N/U 545-5348-71
11e2" I.D. Rubber Ring BLK 1 545-5348-07
6 11e2" I.D. Rubber Ring WHT 545-5348-57
11e4" I.D. Rubber Ring BLK 3 545-5348-06
7 11e4" I.D. Rubber Ring WHT 545-5348-56
1" I.D. Rubber Ring BLACK 1 545-5348-05
8 1" I.D. Rubber Ring WHITE 545-5348-55
3e " I.D. Rubber Ring BLACK
9
4 545-5348-04
3e " I.D. Rubber Ring WHITE
4 545-5348-54
7/ " I.D. Rubber Ring BLK
10 16 545-5348-18
7/ " I.D. Rubber Ring WHT
16 545-5348-68
3e " I.D. Rubber Ring BLACK
11
8 1 545-5348-03
3e " I.D. Rubber Ring WHITE
8 N/U 545-5348-53
5/ " I.D. Rubber Ring BLK
1 3 4 6 8 8 6 4 3 1 12 16 545-5348-02
5/ " I.D. Rubber Ring WHT
16 545-5348-52
3/ " I.D. Rubber Ring BLK
13 16 3 545-5348-01
3/ " I.D. Rubber Ring WHT
16 545-5348-51
7/ " O.D. Rubber Ring BLK
14 16 57 545-5348-17
7/ " O.D. Rubber Ring WHT
6HF3DUWV,G

16 545-5348-67
Note: Item 14, 7/16" O.D. Black Rings (Qty. 50 of 57) are used to cusion
the Bayonet Sockets under the playfield (between bracket & playfield).
3e " O.D. Rubber Ring BLK
15
8 545-5348-19
3e " O.D. Rubber Ring WHT
8 545-5348-69
Small Flipper BLACK Ring
545-5207-00
16 (Soft Duro)
Small Flipper RED Ring
(Soft Duro) 545-5207-22
Large Flipper BLACK Ring
(50 Duro) 2 545-5277-00
Large Flipper YELLOW Ring
(50 Duro) (use -06 40 Duro) 545-5277-04
17 Large Flipper WHITE Ring
(50 Duro) 545-5277-08
Large Flipper RED Ring
(Soft Duro) 545-5277-22
Nr. RUBBER BUMPER PADS QTY. SPI PART Nr.
A* Bumper BLK Pad (Lg. w/ grommet) 3 545-5428-00
Item A are located on Flipper Assemblies. See next page for location.

B* Bumper BLK Pad (Sm. w/ grommet) 4

Item B are located on multiple assemblies. See next page for location.
545-5105-00 7DNH1RWH
Bumper BLUE Pad (Newton Up/Down) * An asterisk ( * ) indicates view of item on the Assembly Drawing
C* 2 626-5082-00 only (for location see next page). For better view(s), see Drawings
D* Bumper BLUE Pad (3.5" X .75") 1 626-5083-00 for Major Assemblies... (The Blue Pages), Section 4, Chapter 2,
Items C & D : For views of how it is used, see Page 50 and Temple Asm. Pages 76-77. (Page 63), (view Table of Contents for exact page).
Nr. RBR. BUMPER POST SLVS. QTY. SPI PART Nr.
J are Black Rubber Parts.
Legend Note:
E* Bumper BLACK Post Sleeve (Tall) 10 545-5308-00
J are Blue Rubber Parts.
Items noted with a black square
Item E in RED use 545-5308-22; Item E in WHITE use 545-5308-08. Items noted with a blue square
F* Bumper BLACK Sleeve High Impact (.875") 2 545-5308-875

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 3OD\ILHOG7RS %RWWRP5XEEHU3DUWV%ODFNJ %OXHJ&RQWLQXHG
Item A Note:
Located below ~ on three (3) assemblies:
Left Flipper (Page 66), Right Flipper (Page 67) and Ramp Diverter (Page 73)

Item B Note:
Located below ~ on four (4) assemblies:
† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.

5-Ball Trough (Page 67),

Eject (30°) (Page 72),
Cairo Swordsman (Page 74) and
Scoop (Page 78)

Qty. 2
3 Qty. 2
E
11 E
E
3
E above
Plastic -39
D
14
F
F
7
14

8
E
Qty. 3
3 E
E

E
C
C

7
14 7

13 13
14 14
3 3

6HF3DUWV,G
17 17

14

7DNH1RWH
Legend Note:
J are Black Rubber Parts.
Items noted with a black square
Items noted with a blue square J are Blue Rubber Parts.

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 3OD\ILHOG7RS %RWWRP6PDOO%D\RQHW6RFNHWV %XOEVJ $FWXDO6L]H †
A1 B C
Clear Red Blue Yellow
Red Clear
Amber
Green

† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.
Blue
White

#44 Amber
LED Bulb #455
Bulbs or (Bayonet Style) Bulb
Orange

2 3 4 5 6
6HF3DUWV,G

8 9 10
7

Nr. BULBS (#44) QTY. SPI PART Nr. Nr. BULBS (LED & #455) QTY. SPI PART Nr.
#44 Bulb (Clear) Heavy Filament 52 165-5000-44-HF B LED Module (WHT) (12.8v 20-25mA) Bynt. 112-5023-08
A #44 Bulb (Amber) Heavy Filament Item B Note: Different Colors available (not used in this game) ~
1 165-5053-03-HF Red (112-5023-02); Amber (112-5023-03); Green (112-5023-04); Blue (112-5023-05);
Item A Note: Green (165-5053-04-HF); Yellow (165-5053-06-HF); Red (165-5053-02-HF);
Blue (165-5053-05-HF); Orange (165-5053-07-HF) C #455 Twinkle Bulb 165-5003-00
Nr. SMALL BAYONET SOCKETS QTY. SPI PART Nr. Nr. SMALL BAYONET SOCKETS QTY. SPI PART Nr.
1 2-Lug Staple Down Socket 14 077-5000-00 9 3-Lug Laydown Socket (3 Lugs Flat) 077-5006-00
2 3-Lug Stand-Up Socket (Med. Brkt.) 077-5008-00 10 2-Lug Stand-Up Socket (Tall Bracket) 077-5005-00
3 2-Lug Stand-Up Socket (Med. Brkt.) 077-5002-00 11 3-Lug Stand-Up Long Shell Socket 077-5013-00
4 2-Lug Stand-Up Socket (Short Brkt.) 39 077-5223-00 12 2-Lug Stand-Up Lg. Shell Socket (GIs) 077-5031-00
5 2-Lug Stand-Up Sckt. (Short Bracket) 077-5002-31 13 1-Lug S-U Lg. Shell Sckt. (Med. Brkt.) 077-5012-00
6 3-Lug Staple Down Socket 077-5001-00 14 3-Lug S-U Lg. Shell Sckt. (45° Brkt.) 077-5035-00
7 2-Lug Laydown Socket 077-5003-00 15 3-Lug Laydown Socket (2 Lugs Bent) 4 077-5032-00
8 3-Lug Stand-Up Socket (Tall Bracket) 077-5009-00

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
 3OD\ILHOG7RS %RW6PDOO%D\RQHW6RFNHWV %XOEVJ $FWXDO6L]H † &RQWLQXHG
† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.

11 12 13 14 15

3OD\ILHOG%RWWRP/DUJH%D\RQHW6RFNHWV %XOEVJ $FWXDO6L]H †

D
Clear

1 2

#89
Bulb

6HF3DUWV,G
3 4 5 6

Nr. BULBS (#89) QTY. SPI PART Nr.

D #89 Bulb Heavy Filament 15 165-5000-89-HF
Nr. LARGE BAYONET SOCKETS QTY. SPI PART Nr. Nr. LARGE BAYONET SOCKETS QTY. SPI PART Nr.
1 2-Lug Laydown Standard Socket 2 077-5100-00 4 2-Lug Stand-Up Rev. Mount Socket 077-5103-00
2 2-Lug Stand-Up Short Socket 6 077-5101-00 5 2-Lug Stand-Up Rv. Mnt. Short Socket 077-5106-00
3 2-Lug Stand-Up Long Socket 7 077-5102-00 6 2-Lug Straight Leg Socket 077-5107-00

3DUWV,GHQWLILFDWLRQ 6HFWLRQ&KDSWHU
/RFDWLRQ 3DJH
 3OD\ILHOG7RS %RWWRP:HGJH%DVH6RFNHWV %XOEVJ $FWXDO6L]H †
E1 E2 E5 E4 F1 F2 F3 F4 F5

Clear Red Green Blue Clear Red Amber Blue Yellow

† The item type (size / description), the quantity and/or location used, are subject to change without notice. Service Bulletins will anounce any changes, if warranted.
#555
Bulbs Yellow E3
#906 Note: Always replace with same type bulb in original application.
Bulbs
E6

White

1 2 3

LED Bulb
(Wedge Base)

Item 4 Socket does not require brackets.

Old stock may include "L" style brackets
(each side); do not secure to assembly.
Black Wires (Qty. 2) are 12" each.
Item 5a or 5b sockets are secured to the playfield or assembly by Item 5c
Plastic Bracket or may also be snapped into specially cut Clear and / or
Screened Plastic Pieces or Metal Brackets (used for multiple
mounting of sockets when positioned closely together or
in tight areas). If Plastic Pieces or Metal Brackets are
used to mount Item 5a or 5b Sockets, it will be noted on
Playfield Bottom - Miscellaneous Parts and Brackets,
4
page earlier in this Chapter.
Item 5a is a solderless IDC (Insulation Displacement
Connection) Socket with a built-in Diode, 1N4003 (112-5003-00)
(can be replaced with 1N4001 Diode, 112-5001-00). Item 5b Socket
(Yellow) is identical to 5a (Socket) except it does
6HF3DUWV,G

NOT REQUIRE a diode (Flash Lamp usage).

5/
16"
5c

Just squeeze
the "side 5a
arms" of the
socket together
and pull away
from the plastic
or bracket for easy
Bulb replacement. 6
5a only
5b
5b is Yellow with No Diode

Nr. BULBS (#555) QTY. SPI PART Nr. Nr. BULBS (LED & #906) QTY. SPI PART Nr.
E1 #555 Wedge Base Bulb (Clear) 58* 165-5002-00 E6 LED Module (WHT) (5v - 6.3v) Wedge Base 4 112-5024-08
Item E6 Bulb Note : Typically used with Item 4 Socket in Pop Bumpers.
E2-E5 #555 Wedge Base Bulb (Amber) 1 165-5054-03
Item E2-E5 Bulb Note: Different Colors available (not used in this game) ~ F #906 Wedge Base Bulb (Clear) 165-5004-00
Red (165-5054-02); Green (165-5054-04); Blue (165-5054-05); Yellow (165-5054-06); Item F Note: Different Colors available (not used in this game) ~
* Qty. 20 Item E located on the LAMP X20 PCB, see Sec. 5, Chp. 4, Pages 132 – 134. Red (165-5004-02); Amber (165-5004-03); Blue (165-5004-05); Yellow (165-5004-06)

Nr. WEDGE BASE SOCKETS QTY. SPI PART Nr. Nr. WEDGE BASE SOCKETS QTY. SPI PART Nr.
1 Wedge Base Socket (Laydown) 4 077-5026-01 5a IDC Snap-On Socket (Biege) 34 077-5216-00
2 Wedge Base Socket (Offset) 077-5029-00 5b IDC Snap-On Socket No Diode (Yel.) 077-5216-01
Wedge Base Socket (Laydown GI) 5/ " Ht. Bracket (White)
3 077-5030-00 5c 16 34 545-5760-18
4 W.B. Socket (Bumpers/Special App.) 5 077-5206-00 6 Light Reflector (Silver Plst.) REF540N 4 545-5409-01
Note Item 6 : Typically used with Item 1 (but will fit on any similiar Wedge Base Socket).

6HFWLRQ&KDSWHU 3DUWV,GHQWLILFDWLRQ
3DJH /RFDWLRQ
6HFWLRQ  & KD SW H U  R I  
'UDZLQJVIRU0DMRU$VVHPEOLHV 5DPSV 7KH%OXH3DJHV
7DEOHRI&RQWHQWV
IRU6HFWLRQ&KDSWHURI
7DEOHRI&RQWHQWVIRU6HFWLRQ&KDSWHU  
%DOO6KRRWHU 3OXQJHU $VVHPEO\ 7RS 
Z Assembly View Z Ball Shooter Parts Table
$XWRSOXQJHU$UP:HOG$VVHPEO\$XWRSOXQJHU&RLO$VVHPEO\1'
DQG6KRRWHU/DQH6ZLWFK$VVHPEO\  %RW 
%DOO7URXJK$VVHPEO\1' 
: Associated Parts: Ball Trough Enter/Exit Scoop, 535-7329-01; Steel Balls (1-1/16" ø), 260-5000-00
)OLSSHU /HIW $VVHPEO\1'  
: Associated Parts: WHITE Flipper Bat & Shaft Asm., 515-5133-08-06; Large Flipper BLACK Rubber Ring, 545-5277-00
)OLSSHU 5LJKW $VVHPEO\1' 
: Associated Parts: WHITE Flipper Bat & Shaft Asm., 515-5133-08-06; Large Flipper BLACK Rubber Ring, 545-5277-00
6OLQJVKRW /HIW 5LJKW $VVHPEOLHV1' 4W\  
6OLQJVKRW 8SSHU/HIW $VVHPEO\ &RLO5RWDWLRQ 51'DQG
6OLQJVKRW 8SSHU5LJKW $VVHPEO\ 0RGLILHG%UDFNHW 1'$  
5LJKW%XPSHU7RS%RWWRP 6ZLWFK,QGLYLGXDO3DUWV2QO\ 
/HIW7RS %RWWRP%XPSHU7RS%RWWRP 6ZLWFK,QGLYLGXDO3DUWV2QO\ 
(MHFW ƒ $VVHPEO\1' 6ZLWFK$VVHPEO\,QGLYLGXDO3DUWV2QO\  
5DPS'LYHUWHU$VVHPEO\,QGLYLGXDO3DUWV2QO\DQG%DOO'LYHUWHU)ODJ$VP,32 
6ZRUGVPDQ0RWRU %RWWRP $VVHPEO\,QGLYLGXDO3DUWV2QO\  
6ZRUGVPDQ*DWH 7RS $VVHPEO\,QGLYLGXDO3DUWV2QO\  %RW 
7HPSOH1HZWRQ&DSWLYH%DOO$VVHPEO\13 
/RZHU7URXJK 0RWRU$VVHPEO\,QGLYLGXDO3DUWV2QO\  
6FRRS XQGHU*UDLO $VVHPEO\,QGLYLGXDO3DUWV2QO\ 
$UN 7RS $VVHPEO\,QGLYLGXDO3DUWV2QO\ $UN3URWHFW,QGLYLGXDO3DUWV2QO\ 
$UN %RWWRP $VVHPEO\,QGLYLGXDO3DUWV2QO\  

6HF'UDZLQJV
0DJQHW$VVHPEO\,QGLYLGXDO3DUWV2QO\  
6KRRWHU6NLOO3ODVWLF5DPS$VVHPEO\,QGLYLGXDO3DUWV2QO\  
0DLQ3ODVWLF5DPS$VVHPEO\,QGLYLGXDO3DUWV2QO\  
%DFN3DQHO$VVHPEO\,QGLYLGXDO3DUWV2QO\  
+RO\*UDLO &XS 6RFNHWV %XOEV,QGLYLGXDO3DUWV2QO\  7RS 
'RXEOH6ZLWFK ,QOLQH 2IIVHW %UDFNHW$VVHPEO\,QGLYLGXDO3DUWV2QO\  %RW 
2SWLRQDO 6KDNHU0RWRU.LW  

'UDZLQJVIRU0DMRU$VVHP 6HFWLRQ&KDSWHU
EOLHV 5DPSV 3DJH
 %DOO6KRRWHU 3OXQJHU $VVHPEO\ Securing Hardware for Items 3 & 5 are
also shown separated from the Ball

Assemble into
,WHPV Shooter (Plunger) Assembly for clarity.

Housing in the 5
following order: 4 6
Washer
Rod Assemby (see Item 5)
(see Item 2), Retaining
Short Spring (E-) Ring
(see Item 3), Washer (see Item 5)
Washer (see Item 5)
(see Item 3),
Bushing
(see Item 4)
Nr. BALL SHOOTER PARTS QTY. SPI PART Nr.
and then ... 1 Housing Asm. + Bushings (Item 4) 1 535-5067-02
and then ... Item 1 is secured to the Cabinet by: Support Plate [not included with Item 1 or Assembly]
(535-5027-00), #10-32 X 1/2" PPH (Sems) Zinc TF (Qty. 3) (237-6033-00), #10 Split Lock
2 3 Bushing Washer (Qty. 3) (244-5003-00) and #6 X 1/2" HWH AB (Zinc) Red (Qty. 2) (234-5001-02)
(see Item 4),
Washer 2 Rod Assembly (with Black Knob) 1 515-6557-00
(see Item 5),
Long Spring 3 Comp. Spring (Short) (Knob Side) 1 266-5010-00
(see Item 5), Item 3 is sandwiched onto Item 2 (Front Side) between the knob and by:
Washer Washer, 3/8" I.D. X 5/8" O.D. X 1/16" (242-5014-00)
(see Item 5),
Retaining Ring 4 Bushing, 3/8" I.D. (Oilite) 2 280-5010-00
(see Item 5), Item 4 is included with Item 1, Housing, (1 @ the front; 1 @ the back) as shown.
Plunger Tip
(see Item 6). 5 Comp. Spring (Long) [GREEN, .035" ø] 1 266-5001-04
1+4 Item 5 is sandwiched onto Item 2 (Rubber Tip Side) by: Washer, 3/8" I.D. X 5/8" O.D. X
1/16" (Qty. 1/per side) (242-5014-00) and Retaining Ring, 3/8" ø Shaft (270-5012-00)

6 Rubber [Plunger] Tip (Black 50 Duro) 1 545-5276-00

Ordering Note: If 500-6146-00-04 is unavailable, order the individual part(s) actually required. ... Identical to 500-6146-00-07
has Comp. Spring [Orange, .038" ø] (266-5001-07) or 500-6146-00-05 has Comp. Spring [Blue, .031" ø] (266-5001-05).

??????????????????????????????????
$XWRSOXQJHU$UP:HOG$VP ,WHPV 
4 $XWRSOXQJHU&RLO$VVHPEO\1' ,WHPV
Washer
(see Item 3)
DQG6KRRWHU/DQH6ZLWFK$VVHPEO\ ,WHPV
Nr. AUTOPL. ARM WELD PARTS QTY. SPI PART Nr. Nr. AUTOPLNGR. COIL PARTS QTY. SPI PART Nr.
1 Arm Weld Assembly 1 515-6526-00 6 Autoplunger Coil Bracket Assembly 1 515-6527-00
Item 1 is secured to Item 2 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00) Items 1 & 6 are secured below the P/F by: #8 X 1/2" SHWH AB (Zc.) (Qty. 9) (234-5101-00)

2 Autoplunger Fulcrum 1 535-7697-00 7 Coil Retainer Bracket 1 535-5203-03

Nyliner, 1/4" (Thomson #4l1-FF) Item 7 is secured to Item 6 by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5300-00)
3 2 545-5423-00
4 Plunger & Link Assembly 1 511-5183-00 8 Coil, 23-800 [ NO DIODE ] 1 090-5001-ND
Item 4 is secured to Item 1 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00) COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE BELOW FOR DETAILS.
For Individual Items use : Plunger 1.81" Lg. (530-5025-05), Plunger Link (545-5293-00) and Coil Sleeve
Roll Pin 1/8" ø x 5/8" Lg. (251-5008-00) 9 1 545-5031-00
(ASM. REF. 500-6092-03-ND, Items 6-9)
5 Compression (Return) Spring 1 266-5020-00
(ASM. REF. 500-6091-00, Items 1-5)
Nr. SWITCH PARTS QTY. SPI PART Nr.
10 Switch (for Shooter Lane) 1 180-5157-00
11 Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
1 11 Switch Mounting Bracket 1 535-6173-00
6HF'UDZLQJV

Item 11 is secured to Playfield by: #6 X 1/2" SLT HWH AB (Zinc) (Qty. 2) (234-5001-02)

12 Switch Body Protect Plate 1 535-6539-00

SW. 23 Item 12 is secured to Items 10-11 by: #2-56 X 1/2" Unslotted Ser. HWH #4 Head TR3
Black (Qty. 2) (237-5937-02) and #2-56 Hex Nut (Qty. 2) (240-5301-0)
10 (ASM. REF. 500-6096-00, Items 10-12)

2
For Securing Hardware,
12 see the Parts Table above,
under the item desired.
6

7
2 Coil Sleeve
thru Coil
Coil Assembly
shown turned
Retaining
(E-) Ring 90° for clarity.
(see Item 4) 1 9

Item 3 is also
Retaining
7DNH1RWH
shown separated
from the Auto- (E-) Ring
(see Item 4)
# #
plunger Fulcrum
for clarity. Coil Note: NO DIODE


8 ON LUGS. If replacing
12',2'(

4 with a coil of the same

3
4

Plunger Link gauge and turn & it has

a diode on it, remove it
Qty. 2 5 before using.
Roll Pin

For Securing Hardware,

see the Parts Table above,
under the item desired.

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 %DOO ‡7URXJK$VVHPEO\1' ,WHPV
DQG$VVRFLDWHG3DUWV6HH3DUWV7DEOH%HORZ
2UGHULQJ1RWH,GHQWLFDOWRZLWKH[FHSWLRQVVHHQRWHEHORZ,WHP 3DUWV7DEOH 
Nr. 5-BALL TROUGH PARTS QTY. SPI PART Nr. Nr. 5-BALL TROUGH PARTS QTY. SPI PART Nr.
1 Ball Trough Outhole Mounting Bracket 1 515-6580-01 11 Trough Ball Guide Plate 1 535-7801-00
Item 1 is secured below the playfield by: #8 X 1/2" SHWH AB (Zc.) (Qty. 4) (234-5101-00) Item 11 is secured to Item 1 by: 1/4" X 5/16" X .144" I.D. Spacer Tap. (Qty. 1)
(254-5014-03) and #2-56 X 1/2" HWH (Ser) UNS #4HD TR3 BO (Qty. 4) (237-5937-02)
2 Coil Mounting Bracket 1 535-7330-01
Item 2 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Sr.) Zinc (Qty. 4) (237-5975-00) 12 Dual OPTO TRANS Board Assembly 1 515-0173-00
Coil Retaining Bracket 13 Dual OPTO REC Board Assembly 1 515-0174-00
3 1 535-5203-03 Items 12 & 13 are secured by: #6-32 X 5/8" HWH Swg (Ser) Zc (Qty. 3/per) (237-5976-04)
Item 3 is secured to Item 2 by: #8-32 X 1/4" SHWH (Serr) Zinc (Qty. 2) (237-5975-04)
For Individual Items use : Dual OPTO Transmitter Board (Qty. 1) (520-5173-00), Dual
4 Coil, 26-1200 [ NO DIODE ] 1 090-5044-ND OPTO Receiver Board (Qty. 1) (520-5174-00), OPTO PCB Tube Spacer (Brass) (Qty. 3/per)
COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE BELOW FOR DETAILS. (530-5308-02) and OPTO PCB Rubber Grommet (Qty. 3/per) (545-5518-00)
Ordering Note: If 500-6318-25-ND is unavailable, order the individual part(s) actually required.
5 Coil Sleeve (Short) (Formost #10-7077) 1 545-5076-01 This assembly is identical to 500-6318-15-ND, -14 or -24 except for the quantity of Items 9 &
6 Steel & Nylon Plunger Assembly 1 515-7309-01 10 (Qty. 4/per on 5-Ball Trough) and Item 11, required when a Magnet Mech. is used in the
game (this game it is required). -ND means no diode on Item 4, Coil, 26-1200.
7 Compression (Return) Spring 1 266-5020-00
8 Rubber Bumper (Grommet) 1 545-5105-00 ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
9 Micro Switch (Roller Actuator, Lite-Force) 4 180-5119-02
Item 9 requires: Heat Shrink Tubing 1/8" ø PUI-24 (Qty. 1"/per) (605-5006-00)
Nr. ASSOCIATED PART(S) QTY. SPI PART Nr.
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00). AP-A Ball Trough Enter / Exit Scoop Rev C 1 535-7329-01
Item AP-A secured to the playfield by: #8 X 1/2" SHWH AB (Zinc) (Qty. 4) (234-5101-00).
10 Switch Body Protect Plate 4 535-6539-00
AP-B ‡ Steel Balls (1-1/16" ø) 4+4 260-5000-00

7DNH6SHFLDO1RWH AP-
A
Item AP-A, Ball Trough Enter / Exit Scoop,
535-7329-01 (not included with the 5-Ball
Trough Assembly), is shown floating
above and rotated slightly for clarity.

Enter / Exit Scoop

AP-
A
‡ THIS GAME ONLY
AP-B Note: Install [ 8 ] Pinballs into
the 5-Ball Trough. [ 4 ] Pinballs will
AP- autoload into the Ark Assembly.
2
B
Qty. 4 + 4
PLAYFIELD CUT-AWAY VIEW

6HF'UDZLQJV
1
Qty. 3 SW. 22
SW. 22
Spacer
(see Item 11)
9 See securing hardware
under Items 12 & 13.

SW. 13
17
SW. SW. 21
18 SW. 21
SW.
For Securing Hardware, 19
see the Parts Table above, SW.
under the item desired. 11 20

5 2
12
Item 12, Dual OPTO TRANS
10 (Transmitter) Board, 515-0173-00,

12',2'(

is mounted on the other side of

Qty. 4 the Trough Assembly, in line with
4 Item 13, Dual OPTO REC
4

(Receiver) Board, 515-0174-00,

using same hardware.
7DNH1RWH
# #
Coil Note: NO DIODE ON LUGS. If replacing
with a coil of the same gauge and turn and it has a diode on it,
remove it before using.
For a break-down of parts of Items 12 & 13, Dual OPTO 3
TRANS & REC Boards (515-0173-00 and 515-0174-00),
see Section 5, Chapter 4, PCBs, Page 103. 7
Cable Wiring Harness
036-5508-04
6 3-Pin Connector
2 045-5007-03
12-Pin Connector
045-5007-12

8
'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 )OLSSHU /HIW $VVHPEO\1' ,WHPV
DQG$VVRFLDWHG3DUWV:KLWH)OLSSHU%DW 6KDIW$VP ,WHPV$3$$3%
Nr. FLIPPER (LEFT) PARTS QTY. SPI PART Nr. Flipper Rebuild Parts for Easier Installation, $ave $:
1 Flipper Base Plate (LEFT) 1 See FRP1
Item 1 is secured below by: #8 X 1/2" SHWH AB (Zinc) (Qty. 8) (234-5101-00)
FRP FLIPPER BASE PLATE KIT (LEFT) :
Includes Item 1 pre-threaded >+< Securing 515-6617-01
Ordering Note : Individual Part (535-7275-01) is not prethreaded, see Item FRP1. 1 Hardware for Items 2, 3, 6 & 8.
2 Flipper Bat Bushing (White Plastic) .25" ø I.D. 1 545-5070-00
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
Power (EOS / End-of-Stroke) Switch 12
3 1 180-5149-00 Plunger
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)

4 Sw. Plate/Spring Return Brkt. (LEFT) 1 535-7354-01 For Securing Hardware,

LEFT see the Parts Table above,
5 Flipper Return Spring 1 265-5035-00 STYLE under the item desired.
6 Coil Stop Bracket Sub-Assembly 1 515-6308-01
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00) FRP1 FRP2
7 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00
8 Coil Support Bracket 1 535-7356-00
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
Coil, 22-1080 [ NO DIODE ] YEL-GRN
12
9 1 090-5032-ND Spiral Pin
COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE BELOW FOR DETAILS.
10 Coil Sleeve 1 545-5388-00 Flipper Link
11 Deflector Pad (Bumper) 1 545-5428-00 13
12 Flipper Plunger & Link Sub-Assy. 1 515-6304-03
For Individual Items use : Flipper Plunger (530-5349-01) and Plunger "Flipper" Link
15 15
(545-5611-01) and is secured to the Plunger by: Bushing, .16" ø ID X .281" ø OD X .187"
(Qty. 1) (530-5532-00) and Spiral Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02) Top
View
13 Crank Bar (Pawl) 1 530-5070-02
Item 13 requires: Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00)

14® Switch Actuator (LEFT) Sub-Assy. 1 515-7257-01 14®

For Individual Items use : Actuator & Spring Bracket (LEFT) (535-9038-01) and ® Switch PLUNGER,
Actuator (White Plastic) (545-5612-00) and is secured to the Bracket by: LINK & LEFT
STYLE Top
Rivet, 1/8" ø X 1/4" Lg. (Qty. 1) (249-5003-00) FRP CRANK View
15 Set Screw: #10-32 X 3/4" Socket Hd. 2 237-6144-00 2 (L E F T S T Y L E)
Item 15 requires: #10-32 Nylon Stop Nut (Qty. 1) Flipper Link Side Only (240-5203-00) ASSEMBLY : Includes Items 12, 13, 14 & 515-7203-01
and #10 Split Lock Washer (Qty. 1) Switch Actuator Side Only (244-5003-00) 15 (comes assembled).
Tool required for Item 15: 5/32" or 4mm Allen Wrench
FRP FLIPPER (LEFT) R E B U I L D K I T :
Item 14® is also shown separated
6 Includes Items 6, 10 AND above FRP2 500-6307-10
from Item 13, Crank Bar, for clarity. Coil Sleeve
thru Coil
3
9 10
7DNH1RWH
# #
use 4mm
Coil Note: NO DIODE 15 or 5/32"
12
 ON LUGS. If replacing
Allen
Wrench

LEFT
STYLE
14® 7 /HIW4 with a coil of the same
gauge and turn & it has
12',2'( a diode on it, remove it
before using.
Bushing
(see Item 13)
Plunger
6HF'UDZLQJV

Spring Washer
behind Coil 8 4 Bushing
LEFT (see Item 12)
Support Bracket
STYLE 12 Spiral Pin

LEFT
5
11 Flipper Item 12’s Bushing is also
Link shown separated from the
Flipper Plunger & Link
Sub-Assembly for clarity.
3
LEFT DEDICATED
STYLE SW. D-10

AP- Reference
1 A Service
Bulletin 152
for additional
13 information
The differences between on Items 12
the Left & Right Flippers & 14.
are:
#10 Nylon
Item 1, Item 4 and 2 Stop Nut
LEFT
STYLE
Item 14® AP- (see Item 15)
B
The coils may also differ
depending on the game. #10 Split
Lock Washer
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY. (see Item 15) 14®
Nr. ASSOCIATED PART(S) QTY. SPI PART Nr. 7DNH1RWH use 4mm
WHITE Flipper Bat & Shaft Assembly 15 or 5/32"
AP-A (Non-Knurled End) without Rubber Ring
1 515-5133-08-06 ® "R" indicates Item noted is Allen
Wrench
Large Flipper BLACK Rubber Ring secured with rivet(s) as listed.
AP-B 1 545-5277-00

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 )OLSSHU 5LJKW $VVHPEO\1' ,WHPV
DQG$VVRFLDWHG3DUWV:KLWH)OLSSHU%DW 6KDIW$VP ,WHPV$3$$3%
Nr. FLIPPER (RIGHT) PARTS QTY. SPI PART Nr. Flipper Rebuild Parts for Easier Installation, $ave $:
1 Flipper Base Plate (RIGHT) 1 See FRP1
Item 1 is secured below by: #8 X 1/2" SHWH AB (Zinc) (Qty. 8) (234-5101-00)
FRP FLIPPER BASE PLATE KIT (R I G H T) :
Includes Item 1 pre-threaded >+< Securing 515-6617-00
Ordering Note : Individual Part (535-7275-00) is not prethreaded, see Item FRP1. 1 Hardware for Items 2, 3, 6 & 8.
2 Flipper Bat Bushing (White Plastic) .25" ø I.D. 1 545-5070-00
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
Power (EOS / End-of-Stroke) Switch
12
3 1 180-5149-00 Plunger
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)

4 Sw. Plate/Spring Return Brkt. (RIGHT) 1 535-7354-00 For Securing Hardware,

RIGHT see the Parts Table above,
5 Flipper Return Spring 1 265-5035-00 STYLE under the item desired.
6 Coil Stop Bracket Sub-Assembly 1 515-6308-01
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00) FRP1 FRP2
7 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00
8 Coil Support Bracket 1 535-7356-00
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
Coil, 22-1080 [ NO DIODE ] YEL-GRN
12
9 1 090-5032-ND Spiral Pin
COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE PREV. PAGE FOR DETAILS.
10 Coil Sleeve 1 545-5388-00 Flipper Link

11 Deflector Pad (Bumper) 1 545-5428-00 13

12 Flipper Plunger & Link Sub-Assy. 1 515-6304-03 15 15
For Individual Items use : Flipper Plunger (530-5349-01) and Plunger "Flipper" Link
(545-5611-01) and is secured to the Plunger by: Bushing, .16" ø ID X .281" ø OD X .187" Bottom
(Qty. 1) (530-5532-00) and Spiral Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02) View
13 Crank Bar (Pawl) 1 530-5070-02
Item 13 requires: Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00)

14® Switch Actuator (RIGHT) Sub-Assy. 1 515-7257-00

For Individual Items use : Actuator & Spring Bracket (LEFT) (535-9038-01) and ® Switch PLUNGER, 14®
Actuator (White Plastic) (545-5612-00) and is secured to the Bracket by: LINK & RIGHT
STYLE
Rivet, 1/8" ø X 1/4" Lg. (Qty. 1) (249-5003-00) FRP CRANK Bottom
View
15 Set Screw: #10-32 X 3/4" Socket Hd. 2 237-6144-00 2 (R I G H T S T Y L E)
Item 15 requires: #10-32 Nylon Stop Nut (Qty. 1) Flipper Link Side Only (240-5203-00) ASSEMBLY : Includes Items 12, 13, 14 & 515-7203-00
and #10 Split Lock Washer (Qty. 1) Switch Actuator Side Only (244-5003-00) 15 (comes assembled).
Tool required for Item 15: 5/32" or 4mm Allen Wrench
FRP FLIPPER (RIGHT) R E B U I L D K I T :
Item 14® is also shown separated 11 Includes Items 6, 10 AND above FRP2 500-6307-00
from Item 13, Crank Bar, for clarity. 3
Spring
Washer
behind
Coil use 4mm
9 Support 12 or 5/32"
15
Allen
Bracket Wrench

14® RIGHT 7
STYLE 8 Plunger Bushing
(see Item 13)

6HF'UDZLQJV

Coil Sleeve
thru Coil 10 Bushing
(see Item 12)
5LJKW4 Spiral Pin 12

6 12',2'(
Item 12’s Bushing is also Flipper
4 shown separated from the Link
5 Flipper Plunger & Link
Sub-Assembly for clarity.
RIGHT

2
3 Reference
RIGHT DEDICATED Service
1 STYLE SW. D-12 AP- Bulletin 152
A for additional
information
13
The differences between on Items 12
the Left & Right Flippers & 14.
are:
RIGHT #10 Nylon
Item 1, Item 4 and Stop Nut
STYLE
Item 14® (see Item 15)
AP-
The coils may also differ B #10 Split
depending on the game.
Lock Washer
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY. 14® (see Item 15)

Nr. ASSOCIATED PART(S) QTY. SPI PART Nr. 7DNH1RWH use 4mm
WHITE Flipper Bat & Shaft Assembly 15 or 5/32"
AP-A (Non-Knurled End) without Rubber Ring
1 515-5133-08-06 ® "R" indicates Item noted is Allen
Wrench
Large Flipper BLACK Rubber Ring secured with rivet(s) as listed.
AP-B 1 545-5277-00

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 6OLQJVKRW /RZHU/HIW 5LJKW $VVHPEOLHV1' 4W\  ,WHPV
Nr. SLINGSHOT PARTS QTY. SPI PART Nr. Nr. SLINGSHOT PARTS QTY. SPI PART Nr.
1 Slingshot Bracket Assembly 1/per 515-5339-01 6 Compression (Return) Spring 1/per 266-5020-00
Item 1 is secured below the playfield by: #8 X 1/2" SHWH AB (Zc.) (Qty. 3) (234-5101-00) Slingshot Stack (Blade) Switch
7 2/per 180-5054-00
2 Coil Retaining Bracket 1/per 535-5203-03 Only 1 of the 2 Switches has a Diode (1N4004) (112-5003-00). See Note Below on Drawing.
Item 2 is secured to Item 1 by: #8-32 X 3/8" PPH MS (Sems) (Qty. 2) (232-5301-00) Can be replaced with (1N4001) (112-5001-00).

Coil, 23-800 [ NO DIODE ] 8 Switch Body Protect Plate 2/per 535-5045-00

3 1/per 090-5001-ND
COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE BELOW FOR DETAILS. Items 7 & 8 are secured to Item 1 by: #6-32 X 5/8" HWH Swage (Qty. 4) (237-5976-04)

4 Coil Sleeve 1/per 545-5031-00 9® Riveted Arm & Tip Assembly 1/per 515-5340-01
For Individual Parts use (requires drilling out rivet & rereviting) :
5 Plunger & Link Assembly 1/per 515-5338-00 Arm (515-5341-01), Kicker Tip (545-5216-01) and Rivet, 1/8" ø x 1/4" Lg. (249-5003-00)
For Individual Items use : Plunger 2" Lg. (530-5025-01), Plunger Link (545-5293-00) and The Riv. Arm is secured to Item 1 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
Roll Pin 1/8" ø x 5/8" Lg. (251-5008-00) The Plunger Link is secured to the Riveted Arm Ordering Note: If 515-5340-01 is unavailable, order the individual part(s) actually required.
by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
Ordering Note: If 500-5849-00-ND is unavailable, order the individual part(s) actually
Ordering Note: If 515-5338-00 is unavailable, order the individual part(s) actually required. required. This assembly is identical to 500-5849-00R-ND with the exception of Item 3, which
has the coil rotated as shown in the drawing on the next page. This assembly is identical to

7DNH1RWH
500-5849-ND-A4 with the exception of Item 1, which is modified to fit the space constraints
in this game only.

# #
Coil Note: NO DIODE ON LUGS. If replacing with a coil of the
same gauge and turn and it has a diode on it, remove it before using. Kicker
Tip
® "R" indicates Item noted is secured with rivet(s) as listed.

LEFT
SW. 26
(Qty. 2)
For Securing Hardware, see the Parts
Table above, under the item desired.
7 9®
Switch Diode Wiring Note: 9®
Cathode Side to LEFT
Lug of Short Blade SW. 26 Link
(WHT Jumper to (Qty. 2) this
2nd Switch) Hinge side
RIGHT Stud Riveted
Anode Side to
Kicker
Tip
7 SW. 27 Arm

:
Middle Lug (Qty. 2)
(TAN-RED)
7
Lug of Long Blade
(GRN-RED & WHT Switch Diode Wiring Note:
Jumper to Retaining
2nd Switch) Ring Cathode Side to RIGHT
Lug of Short Blade SW. 27
(WHT Jumper to Kicker (Qty. 2)
2nd Switch) Tip

Anode Side to 7
:
Middle Lug
1 Retaining
Ring
9®
1 (TAN-ORG)
Retaining
Ring Lug of Long Blade 5
Riveted (GRN-RED & WHT
Arm Jumper to
2nd Switch)
6HF'UDZLQJV

Diode Link
L 1N4004
i 8
n
k Qty.
5 6 1/per
switch
3
Diode on
4 1 Switch Only
Coil
2
Sleeve Plunger
through
Coil Hinge Coil
Retaining Stud Sleeve
Ring through
Coil
/HIW4

4


Diode on
1 Switch Only
3
5W4
',2'(

Diode
1N4004
1
12

)URQW 9LHZ 5HDU 9LHZ

6OLQJVKRW 6OLQJVKRW
/HIW 5LJKW

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 6OLQJVKRW 8SSHU/HIW $VVHPEO\ &RLO5RWDWLRQ 51' ,WHPV
7
UPR. LT.
SW. 46
,GHQWLFDOWRWKH6OLQJVKRW /RZHU/HIW 5LJKW $VVHPEOLHV
Switch Diode Wiring Note:
(Qty. 2)
9® H[FHSWIRUWKHURWDWHG&RLO ,WHP 
Cathode Side to
Lug of Short Blade
(WHT Jumper to
Nr. SLINGSHOT PARTS QTY. SPI PART Nr.
2nd Switch)
UPR. LT. 1–2 See Previous Page (Identical Parts) 1/per See Prev. Page
Kicker 7 SW. 46 3 Coil, 23-800 [ NO DIODE ] ROTATED 1/per 090-5001-ND
Anode Side to Tip
# COIL NOTE BELOW FOR DETAILS.
:
Middle Lug (Qty. 2) COIL DOES NOT REQUIRE A DIODE. SEE
(TAN-BLUE) 4–9 See Previous Page (Identical Parts) 1/per See Prev. Page
Ordering Note: If 500-5849-0R-ND is unavailable, order the individual part(s) actually
Lug of Long Blade
(GRN-ORG & WHT required. This assembly is identical to 500-5849-00-ND with the exception of Item 3, which
Jumper to Retaining has the coil rotated as shown in the drawing below or on the previous page.
2nd Switch) Ring

7DNH1RWH
# #
Coil Note: NO DIODE ON LUGS. If replacing with a coil of the
same gauge and turn and it has a diode on it, remove it before using.
1 ® "R" indicates Item noted is secured with rivet(s) as listed.
Retaining
Ring
Riveted
Arm

L
Diode
1N4004
6OLQJVKRW 8SSHU5LJKW $VP 0RGLILHG
Coil
Sleeve n
i %UDFNHW 1'$ ,WHPV
through
Coil 5 k
6
,GHQWLFDOWRWKH6OLQJVKRW /RZHU/HIW 5LJKW
4 $VVHPEOLHVH[FHSWIRUPRGLILHG%UDFNHW ,WHP
Diode on
1 Switch Only UPR. RT.
2 7 SW. 47
(Qty. 2)
Plunger
Switch Diode Wiring Note: 9®
Cathode Side to
Lug of Short Blade
3 (WHT Jumper to
2nd Switch)
UPR. RT.
8SU/W

Anode Side to
Kicker 7 SW. 47
',2'(

Tip


:
(Qty. 2)
4

Middle Lug
12

(TAN-VIOLET)
1 Lug of Long Blade
(GRN-ORG & WHT
Jumper to Retaining
2nd Switch) Ring

)URQW 9LHZ
6OLQJVKRW 1

6HF'UDZLQJV
8SSHU /HIW Retaining
Ring
Riveted
Arm

6OLQJVKRW 8SSHU5LJKW $VP 0RGLILHG

Diode
L 1N4004

%UDFNHW 1'$ ,WHPV

i
n

,GHQWLFDOWRWKH6OLQJVKRW /RZHU/HIW 5LJKW

k
5 6
$VVHPEOLHVH[FHSWIRUPRGLILHG%UDFNHW ,WHP 3
Diode on
4 2
1 Switch Only

Nr. SLINGSHOT PARTS QTY. SPI PART Nr. Coil Plunger

1 Slingshot Modified Bracket Asm. 1/per 515-5339-01-A4 Sleeve
through
Item 1 is secured below the playfield by: #8 X 1/2" SHWH AB (Zc.) (Qty. 3) (234-5101-00) Coil
2–9 See Previous Page (Identical Parts) 1/per See Prev. Page
Ordering Note: If 500-5849-ND-A4 is unavailable, order the individual part(s) actually
required (Item 1 differs). This assembly is identical to 500-5849-00-A4 with the exception of
8SU5W

Item 1, which is not modified.


4
',2'(

7DNH1RWH
12

# #
Coil Note: NO DIODE ON LUGS. If replacing with a coil of the
same gauge and turn and it has a diode on it, remove it before using.
® "R" indicates Item noted is secured with rivet(s) as listed.

)URQW 9LHZ 1
6OLQJVKRW
8SSHU 5LJKW

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 5LJKW%XPSHU7RS%RWWRP 6ZLWFK,QGLYLGXDO3DUWV2QO\ ,WHPV
DQG6DQNDUD6WRQH,QGLYLGXDO3DUWV2QO\ ,WHPV
FLASH
Q22 1 LAMP 23
63 (RIGHT)
22
7DNH1RWH
DOTS: The Lamp Diode, 1N4004, is
21 not located on the socket (nor included);
2 it’s located on a Terminal Strip under
20 the playfield. See Section 5, Chapter 2,
Playfield Terminal Strips.., Pgs. 96–97,
19 for more details.

For Securing Hardware,

see the Parts Table below, FLASH
under the item desired. Q22

4
AP-23
1
For Securing Hardware,
see the Parts Table below,
under the item desired.

5 5
3 23

16–18 SPOON
SWITCH
ACTUATOR Q12 configuration
For Securing Hardware, INCLUDED shown on this page.
see the Parts Table below, WITH ITEM 17 Q9, Q10 & Q11
under the item desired. configuration shown
on the next page.

RIGHT SW. 33

8–14
16
15
6HF'UDZLQJV

7DNH1RWH  18
# Coil Note: # NO DIODE 4 18
ON LUGS. If replacing
with a coil of the same gauge
and turn and it has a diode 17
on it, remove it before using. 12 ',2'(
Nr. BUMPER SWITCH PARTS QTY. SPI PART Nr.
515-6459-04A-ND Coil
Configuration Shown 16-18 See Next Page (Identical Parts) 1 See Next Page
(coil lugs down) Can substitute Item 17 with 180-5015-05 (ASM. REF. 515-6459-09/R (Qty. 1), Items 16-18)

Nr. BUMPER TOP PARTS QTY. SPI PART Nr. Nr. SANKARA STONE PARTS QTY. SPI PART Nr.
1–4 See Next Page (Identical Parts) 1 See Next Page 19 Bumper Cap (Orange) Modified 1 550-5057-07-A4
Bumper Skirt (Switch Actuator) Modified Item 19 is secured Item 3 by: #4 X 3/4 Phillip Round 25 (Zinc) (Qty. 2) (237-5873-00)
5 1 545-5607-02
6–7 See Next Page (Identical Parts) 1 See Next Page 20 Bracket, Mounting Bulb & Stone 1 535-0210-00
The Top & Bottom Assemblies are secured together by hardware noted in Item 4. Item 20 is secured Item 19 by: #6-32 X 3/8" PPH Sems (Zinc) (Qty. 2) (232-5201-00)
and #6 Washer (Qty. 2) (242-5001-00)

21 2-Lug Stand-Up Short Socket 1 077-5101-00

Nr. BUMPER BOTTOM PARTS QTY. SPI PART Nr. Item 21 is secured Item 20 by: #6-32 X 3/8" PPH Sems (Zinc) (Qty. 1) (232-5201-00)
and #6 Washer (Qty. 1) (242-5001-00)
8–9 See Next Page (Identical Parts) 1 See Next Page
22 #89 Bulb Heavy Filament 1 165-5000-89-HF
10 Coil, 26-1200 [ND] ROTATED LUGS DOWN 1/per 090-5044-ND
COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE ABOVE FOR DETAILS. (ASM. REF. 511-5117-00 (Qty. 1), Items 19-22)

23 Sankara Stone (Molded) 1 880-5102-01

11-15 See Next Page (Identical Parts) 1 See Next Page Item 23 is secured Item 20 by: #6-32 X 5/8" PPH MS Ext Sems (Zc) (Qty. 2) (232-5203-00)
Note: Coil shown assembled with coil lugs down (-04A Configuration) which is
required in one location. (ASM. REF. 515-6459-04A-ND (Qty. 1), Items 8-15) and #6 Washer (Qty. 2) (242-5001-00)

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 /HIW7RS %RWWRP%XPSHU7RS%RWWRP 6ZLWFK,QGLYLGXDO3DUWV2QO\ ,WHPV
DQG$VVRFLDWHG3DUW6HH3DUWV7DEOH%HORZ 
1
LAMPS 7DNH1RWH PLAYFIELD
WOOD
60 (LEFT)
61 (TOP), DOTS: The
62 (BOT.) Lamp Diode,
1N4004, is
not located on
the socket (nor
AP- included); it’s locat- 13
2 ed on a Terminal Strip
A under the playfield. See 8
AP-A
YELLOW Section 5, Chapter 2,
(TOP)
GREEN
3 Playfield Terminal
15 12
(LEFT)
Strips.., Pgs. 96–97, 9
BLUE for more details. 4
(BOTTOM)
ORANGE
(RIGHT) 14

3 15
15 13
14
4
For Securing Hardware,
see the Parts Table below,
1 under the item desired.

10

5 3 12
 ',2'(
16 44
16–18 SPOON
SWITCH
ACTUATOR
INCLUDED
WITH ITEM 17
5 11
18 18
LEFT SW. 30
TOP SW. 31
BOT. SW. 32

8–14 17
For Securing Hardware, see the Parts
Table below, under the item desired.
15 Nr. BUMPER BOTTOM PARTS QTY. SPI PART Nr.
8 Plunger 1/per 530-5348-00

6HF'UDZLQJV
6 9 Compression (Return) Spring 1/per 266-5047-00
10 Coil, 26-1200 [ NO DIODE ] 1/pe 090-5044-ND
7 COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE ABOVE FOR DETAILS.
11 Coil Sleeve 545-5031-00
 12 ',2'(
1/per
15 12 Fiber Yoke 1/per 545-5609-00
44 13 Metal Yoke 1/per 535-7346-00
14 Metal Yoke Stop 1/per 535-7347-00
7DNH1RWH
Item 14 is secured by: #6-32 X 1/4" HWH Swage (Serr.) Zinc (Qty. 2/per) (237-5976-01)

15 Coil Bracket Welded Assembly 1/per 515-5939-00

# Coil Note: # NO DIODE Item 15 is secured below the playfield by: #6-32 X 1-3/16" Spiral Fin Shank (Qty. 3/per)
(237-5957-00) and #6-32 Nylon Stop Nut (Qty. 3/per) (240-5005-00)
ON LUGS. If replacing with a
coil of the same gauge and turn Note: Coil shown assembled with coil lugs down (-04A Configuration) which is
required in one location. (ASM. REF. 515-6459-04-ND (Qty. 3), Items 8-15)
and it has a diode on it, remove
it before using.
Nr. BUMPER SWITCH PARTS QTY. SPI PART Nr.
Nr. BUMPER TOP PARTS QTY. SPI PART Nr. 16 Switch Bracket 1/per 535-7342-00
Item 16 is secured by: #8 X 1/2" HWH AB (Zinc) (Qty. 2/per) (234-5101-00)
1 LED Module (WHT) (6.3v) Wedge Base 1 112-5024-08
Wedge Base Socket 17 Bumper Stack (Blade) Switch Assy. 1/per 180-5015-04
2 1 077-5206-00 Included with Item 17 : Spoon Switch Actuator (545-5610-02).
3 Bumper Body 1/per 545-5197-00 Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
Item 3 is secured above the P/F by: #5 X 7/8" PRH AB (Zinc) (Qty. 2/per) (237-5826-00)
18 Switch Body Protect Plate 1/per 535-7344-00
4 Ring Assembly 1/per 515-5085-00 Items 17 & 18 are secured by: #6-32 X 3/4" HWH Swage (Serr) Zc. (Qty. 2) (237-5976-05)
Item 4 is secured by: #6-32 Nylon Stop Nut (Qty. 2/per) (240-5005-00) Can substitute Item 17 with 180-5015-05 (ASM. REF. 515-6459-09/R (Qty. 3), Items 16-18)
5 Bumper Skirt (Switch Actuator) 1/per 545-5607-00 ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLIES.
6 Bumper Skirt Compression Spring 1/per 266-5048-00 Nr. ASSOCIATED PART(S) QTY. SPI PART Nr.
7 Bumper Base 1/per 545-5195-00 AP-A Bumper Cap (Green, Blue & Yellow) 1/per 550-5057-XX
(ASM. REF. 515-6459-01L (Qty. 3), Items 1-7; 515-6459-01L-A4 (Qty. 1), Items 5 Diff.)
Note: Replace -XX with -04 Green; -05 Blue; -06 Yellow (-07 Orange; -07-A4 Org. Modified)
The Top & Bottom Assemblies are secured together by hardware noted in Item 4.
Item AP-A is secured Item 3 by: #4 X 3/4 Phillip Rnd. 25 (Zinc) (Qty. 2/per) (237-5873-00)

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 (MHFW ƒ $VVHPEO\1' ,WHPV
DQG$VVRFLDWHG3DUWV6HH3DUWV7DEOH%HORZ
%DOOLVVWRSSHGLQWKH(MHFW+ROHDQGNLFNHGRXWLQWRWKHXSSHU6OLQJVKRWVLQWKH0DS5RRP

Nr. 30° EJECT PARTS QTY. SPI PART Nr. Nr. 30° EJECT PARTS QTY. SPI PART Nr.
1 Mounting Bracket 30° Eject (Left) 1 535-8932-02 8 Rubber Bumper (Grommet) 1 545-5105-00
Item 1 is secured below the P/F by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2) (234-5101-00) Ordering Note: If 500-6511-01-ND is unavailable, order the individual part(s) actually required.

2 Coil Retaining Bracket 1 535-5203-03

Item 2 is secured to Item 1 by: #8-32 X 1/4" PPH MS (Sems) (Qty. 2) (232-5300-00) ASSOCIATED PART IS NOT INCLUDED WITH THE ABOVE ASSEMBLY.

3 Coil, 26-1200 [ NO DIODE ] 1 090-5044-ND Nr. ASSOCIATED PART(S) QTY. SPI PART Nr.
COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE BELOW FOR DETAILS.
AP-A Switch (Eject) Assembly 1 500-6520-01
4 Coil Sleeve (Short) (Formost #10-7077) 1 545-5076-01 Switch
For Individual Items use : Switch Bracket (535-6173-00), Micro Switch (180-5186-01),
Body Protect Plate (535-6539-00), Diode 1N4004 (112-5003-00), #2-56 X 1/2" Unslt
5 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00 Serr HWH #4 Hd TR3 Black (Qty. 2) and (237-5937-02) #2-56 Hex Nut (Qty. 2)
6 Plunger (with Nylon Tip) Assembly 1 515-7197-00 (240-5301-00)
Bracket secured to P/F by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 2) (234-5101-00)
7 Compression (Return) Spring 1 266-5020-00

Nylon
Plunger
Tip
6

Coil Sleeve
thru Coil 4

5 1


4 2
7DNH1RWH 12',2'(
# Coil Note: # NO DIODE ON LUGS.
If replacing with a coil of the same gauge
and turn and it has a diode on it, remove it
before using.

6
6HF'UDZLQJV

For Securing Hardware,

see the Parts Table above,
under the item desired.

AP-
A

SW. 45

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 5DPS'LYHUWHU$VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV$ %
Nr. RAMP DIVERTER PARTS QTY. SPI PART Nr. Nr. RAMP DIVERTER PARTS QTY. SPI PART Nr.
1 Diverter Base Plate Kit (Left) 1 511-5161-00 A Shaft, Ball Diverter 1 530-6533-00
Item 1 is secured below by: #8 X 1/2" SHWH AB (Zinc) (Qty. 6) (234-5101-00) Item A secured through Item 2 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
Ordering Note : Individual Part (535-0138-00) is not prethreaded, ordering of the kit is
recommended which will include the Securing Hardware for Items 2, 3, 6 & 8. B (Bracket) Flag, Diverter 1 535-0140-00
Item B secured to Item A by: #6-32 X 1/4" PFH 82° U-Cut (Zinc) (Qty. 2) (237-5871-00)
2 Flipper Bat Bushing (White Plastic) .25" ø I.D. 1 545-5070-00 (ASM. REF. 511-5100-00, Items A & B incl. hardware)
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
use 4mm
X Item 3 skipped to keep item numbers in-line with flipper parts.
15 or 5/32"
12 12-15
Allen
4 Spring Return Brkt. (LEFT) 1 535-7354-01
Item 4 is secured to Item 1 by: #6-32 X 1/4" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-01)
Wrench Order 12-15
assembled:
5 Diverter Flag Return Spring 1 265-5035-00 515-7203-01
6 Coil Stop Bracket Sub-Assembly 1 515-6308-01 Bushing
(see Item 13)
Plunger Read Take Special
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2) Note below for
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00) comment
7 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00 12 Spiral Pin
8 Coil Support Bracket 1 535-7356-00 Bushing
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00) (see Item 12)

9 Coil, 23-1500 [ NO DIODE ] YEL-GRN 1 090-5062-ND

COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE BELOW FOR DETAILS. Flipper
Link
Item 12’s Bushing is also
shown separated from the
Flipper Plunger & Link For Securing Hardware,
10 Coil Sleeve 1 545-5388-00 Sub-Assembly for clarity. see the Parts Table left
Deflector Pad (Bumper) under the item desired.
11 1 545-5428-00
12 Flipper Plunger & Link Sub-Asm. 1 515-6304-03
For Individual Items use : Flipper Plunger (530-5349-01) and Plunger "Flipper" Link
(545-5611-01) and is secured to the Plunger by: Bushing, .16" ø ID X .281" ø OD X .187" 12 Plunger
(Qty. 1) (530-5532-00) and Spiral Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02)
Reference
13 Crank Bar (Pawl) 1 530-5070-02 Service
Item 13 requires: Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00) Bulletin 152
for additional
14® Switch Actuator (LEFT) Sub-Assy. 1 515-7257-01 13 information
For Individual Items use : Actuator & Spring Bracket (LEFT) (535-9038-01) and ® Switch on Items 12
Actuator (White Plastic) (545-5612-00) and is secured to the Bracket by: Rivet, 1/8" ø
X 1/4" Lg. (249-5003-00) Order Note: White Plastic Piece not required this assembly.
& 14. 12-15
Set Screw: #10-32 X 3/4" Socket Hd. #10 Nylon
15 2 237-6144-00 Stop Nut
LEFT
STYLE
Item 15 requires: #10-32 Nylon Stop Nut (Qty. 1) Flipper Link Side Only (240-5203-00)
and #10 Split Lock Washer (Qty. 1) Switch Actuator Side Only (244-5003-00) Tool
(see Item 15) 12
required for Item 15: 5/32" or 4mm Allen Wrench (ASM. REF. 500-7115-00, Items 1-15)
#10 Split
12– order Items 12 through 15 assembled: Lock Washer
Spiral Pin
15 Plunger, Ling & Crank (Left) Asm. 1 515-7203-01 (see Item 15) 14®
(ASM. REF ONLY 511-5104-00, Items 12-15, USE 515-7203-01) Flipper Link
use 4mm
or 5/32"
B 15
7DNH6SHFLDO1RWH
Allen
Wrench 15
® "R" indicates Item noted is secured with rivet(s) as Top
View
listed. Items 12–15 are identical to the Flipper
B Plunger, Ling & Crank (Left Style Asm.), FRP2. 15
This assembly does not 13
B require the riveted White

6HF'UDZLQJV
Plastic Switch Actuator; 6
A however, if you order the 9 Top
LEFT
STYLE
replacement assembly, View
it will be included and
will not interfere with its’ 8 14®
operation.  7 4
A For Securing Hardware,
4 5
see the Parts Table above,
A under the item desired.

1 10
1

2
11 2

12-15
11
2
9
 7DNH1RWH
12-15 4
6 # #
Coil Note: NO DIODE ON LUGS.
If replacing with a coil of the same
gauge and turn & it has a diode on it,
12',2'( remove it before using.

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 6ZRUGVPDQ0RWRU %RWWRP $VVHPEO\,QGLYLGXDO3DUWV2QO\
 ,WHPV 
3
5HI$,WHP >3DUWV7DEOHRQWKHQH[WSDJH@
'ULYH6KDIW 11
11
VHFXUHVWR,WHP Ref. A
%UDFNHW:HOGPHQW 9 14
RQWKHQH[WSDJH 2M Qty. 4

Connector
Not Shown
for clarity.
4 13
1

8 Attach
Spring
end here

4
0RWRU 8
1 11 Ref. A

11 Ref. A: Retaining Ring, 1/4" [11] (Not

Shown) used here to secure Swordsman
1 Mounting Weldment [17] on next page.

4 Qty. 2

2
For Securing Hardware, see
Qty. 3 the Parts Table on the next
page, under the item desired.

3
6
9 12
5
3
6HF'UDZLQJV

Retaining Ring, 3/16" [14]

(secures spring)
Retaining Ring, 1/4" [11]
(1 on each side of bushing)
10
14 Apply Lithium Grease
to teeth on Cam [15].
1 13
11 15
3 3
10
SW. 63

(OPTO)

SW. 64
2 15 6
Ref. A: Retaining Ring, 1/4"
[11] (Not Shown) used here to
2 16 Set Screw 1/4" Cup Pt.
same for the Cam [15] and
secure Swordsman Mounting Qty. 3 Ratchet Weldment [3].
Weldment [17] on next page. 12 Use 5/64" Allen Wrench.

7
Qty. 2
1/8" Spacers

8
4 4 (Not Shown),
offset the
Qty. 2 0RWRU Use Loctite
243 on
OPTO PCB [6].
Motor
11 Mounting
4 Screws.
Ref. A

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
6ZRUGVPDQ0RWRU %RWWRP $VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV &RQWLQXHG
>'UDZLQJ9LHZVRQWKHSUHYLRXVSDJH@
Nr. SWORDSMAN BOT. PARTS QTY. SPI PART Nr. Nr. SWORDSMAN BOT. PARTS QTY. SPI PART Nr.
1 Bracket, Motor Mount 1 515-7690-00 8 Drive Shaft 1 530-6534-00
Item 1 is secured below by: #8 X 1/2" SHWH AB (Zinc) (Qty. 3) (234-5101-00) READ REFERENCE (REF.) A NOTE.

2 "Flipper" Bushing (White Plastic) .25" ø I.D. 1 545-5070-00 9 Bracket, Cover 1 535-0186-00
Item 2 is secured to Item 1 by: #6 X 3/8" HWH Swage Ser. (Zinc) (Qty. 3) (237-5976-02) Item 9 is sec’d to Item 1 by: #6-32 X 1/4" PPH MS Ext. Sems (Zinc) (Qty. 4) (232-5200-00)

2M "Flipper" Bushing (White Plastic) Modified 1 545-5070-03 10 Rubber Bumper (Grommet) 1 545-5105-00
Item 2M is secured under the P/F by: #6 X 5/8" SHWH AB (Zinc) (Qty. 3) (234-5002-00) Retaining Ring, 1/4" ø Shaft
11 3 270-5002-00
3 Ratchet Weldment, Driven Teeth 360° 1 515-7689-00 Item 11 required on Item 8 (Drive Shaft) @ Item 2 (Bushing) on both sides and
Item 3 is secured by Item 11 and: #8-32 X 1/4" Set Screw Cup Pt. (Qty. 1) (237-6130-00) the shaft top with the Gate Mounting Weldment above the playfield.
Tool Required: 5/64" Allen Wrench Washer (White Nylon) .252" I.D. X .472"
12 1 242-5072-01
4 Motor & Connector 1 511-5063-02 13 Spring (Extension) 1 265-5035-01
Item 4 is sec’d to Item 1 by: #6-32 X 1/4" PPH MS Ext. Sems (Zinc) (Qty. 2) (232-5200-00)
Use Loctite 243 Motor Only (No Conn.) Ref. Only 041-5103-02, shaft modified with hole. 14 Retaining Ring, 3/16" Shaft 1 270-5001-00
Motor Specifications: 24VAC 50/60Hz 3W 12 RPM CW RoHS 15 Motor Cam Weldment 1 515-7688-00
Micro Switch (Roller Actuator, Lite-Force) Item 15 is secured by Item 11 and: #8-32 X 1/4" Set Screw Cup Pt. (Qty. 1) (237-6130-00)
5 1 180-5119-02 Tool Required: 5/64" Allen Wrench Ensure Set Screw aligns into hole (see decal).
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
Item 5 is secured to Item 1 by: Switch Body Protect Plate (535-6539-00) and 16 Fiche Paper (Insulator) 1 545-6268-00
#2-56 X 1/2" Uns. Serr. HWH #4 Head TR3 Black (Qty. 2) (237-5937-02) (ASM. REF. ONLY 511-5115-00, Items 1–16)

6 OPTO "U" Interuptor PCB 1 520-5251-00

Note: For a 3D View, Schematic & Wiring, see Section 5, Chapter 4, PCBs, Page 129.
* Relay & Connector 1 500-6700-00
Note: For Wiring, see Section 5, Chapter 1, Backbox Wiring, Page 91.
7* Spacer, 1/8" X 3/8" O.D. X .175" I.D. 2 254-5000-19
Items 6 & 7 are secured by: #4-40 X 3/8" PPH Sems Blk Zinc (Qty. 2) (237-5997-00) 7DNH1RWH
* An asterisk (*) indicates item(s) are not noted in the pictorials.

6ZRUGVPDQ*DWH 7RS $VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV

,WHP *DWH0RXQWLQJ:HOGPHQW VHFXUHGWR,WHP 'ULYH6KDIW DERYHWKHSOD\ILHOG
Nr. SWORDSMAN TOP PARTS QTY. SPI PART Nr. Nr. SWORDSMAN TOP PARTS QTY. SPI PART Nr.
17 Bracket, Mounting Weldment (Gate) 1 515-7686-00 19 Bracket, Mounting (LED Flash PCB) 1 535-0215-00
Item 17 is secured by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00) and Item 19 is secured to Item 18 by: #6-32 X 3/8" PPH Sems (Zinc) (Qty. 2) (232-5201-00)
Socket Head Screw #8-32 X 3/8" Zinc (237-5897-00) Tool Required: 9/64" Allen Wrench and #6 Washer (Qty. 2) (242-5001-00)
READ REFERENCE (REF.) A NOTE.
20 PCB, LED Flash X2 1 520-5289-00
18 Swordsman Molded Gate 1 880-5103-00 Item 20 is secured to Item 18 by: #6-32 X 5/8" PPH Sems (Zinc) (Qty. 2) (232-5203-00)
Item 18 is secured to Item 17 by: #6-32 X 3/8" PPH Sems (Zinc) (Qty. 3) (232-5201-00) Note: For a 3D View, Schematic & Wiring, see Section 5, Chapter 4, PCBs, Pages 136–137
(ASM. REF. ONLY 511-5119-00, Items 17–20) (ASM. REF. ONLY 511-5135-00, Items 19–20 Only)

18
18

6HF'UDZLQJV
Qty. 2
19
4
)ODVK

19
For a 3D View,
Schematic &
Wiring, see Section
5, Chapter 4, PCBs,
Ref. A Pages 136–137.

17

Retaining Ring, 1/4" (270-5002-00) and 17 Qty. 3

Ref. A: Socket Head Screw #8-32 X 3/8"
Zinc (237-5897-00) used to secure Item 17
onto Item 8 (Drive Shaft) of the bottom
assembly. Use 9/64" Allen Wrench. For Securing Hardware,
see the Parts Table above,
under the item desired.

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 7HPSOH1HZWRQ&DSWLYH%DOO$VVHPEO\13 ,WHPV
DQG$VVRFLDWHG3DUW.LW3ODVWLFV LQFOXGHV $ ,WHP$3$
5HI%,WHP /LQNDJH VHFXUHVWR,WHP 'ULYHU'LVF RQWKHQH[WSDJH
Nr. CAPTIVE BALL PARTS QTY. SPI PART Nr. Nr. CAPTIVE BALL PARTS QTY. SPI PART Nr.
1 Bracket, Hinge Channel 1 535-0190-00 9 Bracket, Blue Pad Retainer 2 535-0155-00
Item 1 is secured above the playfield by: #8-32 X 1" PFH MS (Zinc) (Qty. 2), Items 8 & 9 are secured to Items 6 & 7 by: #4-40 X 1/4" PFH MS (Black) (Qty. 3/per side)
#8 Washer (Qty. 2) (242-5005-00) and #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00) (237-5983-02)

2 Platform (for Captive Pinballs) 1 535-0152-00 10 Bracket, Pinball Deflector 1 535-0153-00

Hinge Block (White Nylon) Item 10 is secured to Item 7 (Right Side) by: #8-32 X 1/4" PPH Sems MS Ext. (Zinc)
3 1 545-6341-00 (Qty. 1) (232-5300-00) and secured to Item 2 by: #6-32 X 1/4" PFH 82° Undercut (Zinc)
Item 3 is secured to Items 2, 6 & 7 by: #8-32 X 1" PFH MS (Zinc) (Qty. 2) and #8-32 (Qty. 2) (237-5871-01) and secured to Item 6 by: See securing hardware for Item 11.
Nylon Stop Nut (Qty. 2) (240-5102-00) and secured with Item 4 into Item 1.
Hinge Pin 11 Linkage (Clutched) (White Nylon) 1 545-6326-01
4 1 530-6536-00 Item 11 is secured to Item 6 (Left Side) through the small hole by: #8 Washer (Qty. 2,
5A Stand-Up 1/2" Target & Sw. (Orange) 1 515-7581-07 1 each side, see graphic) (242-5005-00) and #8-32 X 3/16" X 1/4" Shoulder Screw (Qty. 1)
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00). (237-6192-00) READ REFERENCE (REF.) B NOTE.

5B Bracket, Target Mntg. (Unique App.) 1 535-0156-00 12 Wireform Weldment 1 515-7680-00

Item 12 is secured to Item 2 by: #8-32 X 1/2" PFH 82° MS (Qty. 2) (237-6165-08)
5C Target Switch Back Plate 1 535-9823-01
13 Steel Ball (1-1/16" ø) 2 260-5000-00
5D Foam Pad (Adh.) Small // see Apdx. I 1 626-5029-00 (ASM. REF. ONLY 500-7119-NP, Items 1–13 DOES NOT INCLUDE PLASTIC COVER)
Items 5A-5D are secured to Item 2 by: #8-32 X 3/8" PFH 82° Undercut MS (Zinc) (Qty. 2)
(237-6030-00) (ASM. REF. ONLY 500-7120-07, Items 5A–5D + hardware) (ASM. REF. ONLY 500-7119-00, Items 1–13 + AP-A ‡ : ordering of Plastics Kit required)

Bracket, Sidewall (Left Side) ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
6 1 535-0154-00
7 Bracket, Sidewall (Right Side) 1 535-0154-01 Nr. ASSOCIATED PART(S) QTY. SPI PART Nr.
Items 6 & 7 are secured to Item 1 by: #6-32 X 1/4" PPH Sems MS Ext. (Zinc)
(Qty. 1/per side) (232-5200-00) AP-A Kit #1: Plastics (includes -05) 1 803-5000-A4
Item AP-A (Plastic) is secured to Items 6 & 7 by: #6-32 X 1/4" PPH Sems MS Ext. (Zinc) Note: Individual Plastics (830-6073-XX &
(Qty. 2/per side) (232-5200-00) 830-6087-00) are not available individually,
ordering of kit is required.
8 Blue Pad (Rubber Bumper) 2 626-5082-00
AP- 7
A Qty. 4
8 For Securing Hardware,
see the Parts Table above,
under the item desired.
12 1
AP-
A
Qty. 2

13 9 13

1 Qty. 2 3
7
2 12

10 3
10 13
4
11
6HF'UDZLQJV

Ref. B
7
Qty. 1
5
8 8
For Securing Hardware,
see the Parts Table above,
per side 6 LOCTITE
243
under the item desired. AP- 9
A 9
8 2

1 12 10
9 Qty. 3
per
side 3 LOCTITE
243
LOCTITE 243
9 13 Qty. 2

LOCTITE
243 12 Qty. 2
6 11 11 5D
LOC-
2 5C SW. 59
TITE
243
11 7
11 Qty. 1 5B
10 per side
LOCTITE
243
5A
Ref. B: Mount to the Driver Disc
LOCTITE
11 Ref. B [17] on the next page with a
#8 Washer (242-5005-00) and 243
Retaining Ring, 3/16" (270-5001-00)
Qty. 2
10 10

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 /RZHU7URXJK 0RWRU$VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV
5HI%,WHP /LQNDJH RQWKHSUHYLRXVSDJHVHFXUHVWR,WHP 'ULYHU'LVF 
Nr. TROUGH & MOTOR PARTS QTY. SPI PART Nr. Nr. TROUGH & MOTOR PARTS QTY. SPI PART Nr.
14 Bracket, Ball Trough Weldment 1 515-7682-00 18 Micro Switch (Roller Actuator, Lite-Force) 2 180-5119-02
Bracket, Motor Mounting Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
15 1 535-0158-00
Items 14 & 15 are secured under the playfield by: #10 X 1/2" HWH A (Zinc) (Qty. 4, 19 Micro Switch (HAPP #95-1128-00) 1 180-5183-00
1 per tab) (237-5817-00) Item 14 is secured to Item 15 by: #8 Washer (Qty. 2) Switch has a Diode (1N4004) on a Terminal Strip. See Sec. 5, Chp. 2, P/F W., Pages 96–97.
(242-5005-00) and #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
Items 18 & 19 are secured to Items 14 & 15 by: Switch Body Protect Plate (Qty. 1/per)
16 Motor & Connector 1 511-5063-00 (535-6539-00) and #2-56 X 1/2" Uns. Serr. HWH #4 Head TR3 Black (Qty. 2/per)
Item 16 is sec’d to Item 15 by: #6-32 X 1/4" PPH MS Ex. Sems (Zc.) (Qty. 2) (232-5200-00) (237-5937-02)
Use Loctite 243 Motor Only (No Connector) Reference Only 041-5103-01. Switch Insulator (Fiche Paper)
Motor Specifications: 24VAC 50/60Hz 3W 12 RPM CW RoHS 20 3 545-6141-01
(ASM. REF. ONLY 500-7121-00, Items 14–20)
17 Driver Disc Weldment 1 515-7681-00
Item 17 is secured onto Item 16 Motor Shaft by: Washer, 1/4" X 7/16" X 1/32" (Qty. 1) * Relay & Connector 1 500-6700-00
(242-5012-00) and #8-32 X 1/4" Set Screw Cup Pt. (Qty. 1) (237-6130-00) Note: For Wiring, see Section 5, Chapter 1, Backbox Wiring, Page 91.
Tool Required: 5/64" Allen Wrench READ REFERENCE (REF.) B NOTE.
7DNH1RWH
* An asterisk (*) indicates item(s) are not noted in the pictorials.

14

SW. 12
15
19
LOCTITE
Diode on Terminal Strip under the playfield. 243
See Section 5, Chapter 2, Playfield Wiring, 19 20 19
Pages 96–97. 17
20 18 Qty. 2
16
15

SW. 52 LOCTITE
SW. 53 243

6HF'UDZLQJV
15
4
0RWRU
Qty. 2 per 16
15 17 Ref. B
SW. 12 Connector
SW. 53
SW.
14 Not Shown
Ref. B: Mount to the for clarity.
52
Linkage [11] on the
previous page with a
20 #8 Washer (242-5005-00)
and Retaining Ring,
3/16" (270-5001-00)
15
For Securing Hardware,
20 see the Parts Table above,
under the item desired.

16
4
0RWRU Connector
Not Shown
for clarity.

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 6FRRS XQGHU*UDLO $VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV
Nr. SCOOP PARTS QTY. SPI PART Nr. Nr. SCOOP PARTS QTY. SPI PART Nr.
1 Bracket, Scoop Weldment 1 515-7361-00 7 Compression (Return) Spring 1 266-5020-00
Item 1 is secured below the P/F by: #8 X 1/2" SHWH AB (Zinc) (Qty. 4) (234-5101-00) Rubber Bumper (Grommet)
8 1 545-5105-00
2 Coil Retaining Bracket 1 535-5203-03 9 Micro Switch (HAPP #95-1128-00) 1 180-5183-00
Item 2 is secured to Item 1 by: #8-32 X 1/4" PPH MS (Sems) (Qty. 2) (232-5300-00) Switch has a Diode (1N4004) on a Terminal Strip. See Sec. 5, Chp. 2, P/F W., Pages 96–97.
3 Coil, 24-940 [ NO DIODE ] 1 090-5036-ND Item 9 is secured to Item 1 by: Switch Body Protect Plate (Qty. 1/per) (535-6539-00),
COIL DOES NOT REQUIRE A DIODE. SEE # COIL NOTE BELOW FOR DETAILS. #2-56 X 1/2" Uns. Serr. HWH #4 Head TR3 Black (Qty. 2/per) (237-5937-02) and
#2-56 Hex Nut (Qty. 2) (240-5301-00)
4 Coil Sleeve (Short) (Formost #10-7077) 1 545-5076-01 (ASM. REF. ONLY 500-6774-01, Items 1–9)
5 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00 Bracket, Hole Protect
10 1 535-0191-00
6 Plunger Assembly 1 515-5000-02 Item 10 is secured to under the playfield by: #6 X 1/2" HWH AB (Zinc) Red (Qty. 3)
(234-5001-02)

1
2
2
8

4
12 ',2'(

SW. 11 9
6 7 5 3
4
1
6HF'UDZLQJV

10

1
For Securing Hardware,
see the Parts Table above, Coil Sleeve
under the item desired. thru Coil

4 9
Spring Washer
Between Items 2 & 3 5 SW. 11

1 2 3 9
 Diode on Terminal Strip under the playfield.
See Section 5, Chapter 2, Playfield Wiring,
4 Pages 96–97.

7DNH1RWH
# #
Large
7
end of
spring 12',2'( Coil Note: NO DIODE ON LUGS.
If replacing with a coil of the same gauge
on coil
side. and turn and it has a diode on it, remove it
8 before using.
6

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 $UN 7RS $VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV
7KH$UN/LGRSHQVDQGFORVHVE\WKH$UN %RWWRP $VVHPEO\RQWKHQH[WSDJHV
Nr. ARK (TOP) PARTS QTY. SPI PART Nr.
Frame (Housing), Ark Frame
3
1 1 515-7687-00
Item 1 is secured under the playfield by: #8 Washer (Qty. 4) (242-5005-00) and
#8-32 Nylon Stop Nut (Qty. 4) (240-5102-00)

2 Ark Base (incl. threaded barrel nuts) 1 880-5100-01

Item 2 is secured to Item 1 by: #8-32 X 1/2" PPH MS (Zinc) (Qty. 4) (237-5602-00)

3 Ark Lid (880-5100-00*) with Hinges 1 511-5108-00 6

Note: The Ark Lid is not available without hinges; however, hinges can be ordered separately.

4 Hinge 2 390-5044-00
Item 4 is sec’d to Item 3 by: #8-32 X 1/4" PPH MS (Zinc) (Qty. 2/per) (232-5300-00)
Items 3 & 4 are sec’d to Item 1 by: #8-32 X 1/2" PPH MS (Zc) (Qty. 2/per) (232-5302-00)

5 PCB, LED Flash X2 2 520-5289-00

Item 5 is secured to Item 1 by: #6-32 X 1/2" PPH MS (Zinc) (Qty. 2) (237-5502-00) and
1/4" Self Retaining Plastic Spacer (White) (Qty. 2/per) (254-5007-02) 2
Note: For a 3D View, Schematic & Wiring, see Section 5, Chapter 4, PCBs, Pages 136–137.

6 Kit #2: Plastics 1 803-5001-A4

Item 6 is secured to Item 1 by: #6-32 X 3/8" PPH MS (Zinc) (Qty. 4) (237-5501-00)
Note: Individual Plastics (includes 545-6328-00 Top Plate and 545-6328-01 Front (Not 4
Shown)) are not available individually, ordering of kit is required.
(ASM. REF. ONLY 500-7117-00, Items 1–6)
1
Qty. 4
6
6 For Securing Hardware,
see the Parts Table above,
under the item desired.

Qty. 4
3 LOCTITE 3
243

5
4
)ODVK
5 4
Qty. 2/per )ODVK
5
Qty. 2/per

5 4 Qty. 2

Nr. ARK (TOP) PARTS QTY. SPI PART Nr.

7 Bracket, Blue Rubber Pad 1 535-0200-00
Item 1 is sec’d above the P/F with the Front Plastic (see Item 6 above) by:
Post [Hex Base] #6-32 Tap // #10-32 Thread (Qty. 2) (530-5332-01), Bumper
BLACK Post Sleeve (Tall) (Qty. 2) (545-5308-00), #10 Washer (Qty. 2)

6HF'UDZLQJV
(242-5005-00) and #10-32 Nylon Stop Nut (Qty. 2) (240-5203-00)
Front Plastic mounted atop the posts (see Item 13, Page 52) by: #6 X 1/2"
1 PPH T25 (Qty. 2) (237-5880-02) and #6 Washer (Qty. 2) (242-5001-00)

8 Blue Pad (Rubber Bumper) 1 626-5083-00

Item 2 is secured to Item 1 by: #8-32 X 5/16" PPH MS (Zinc) (Qty. 2)
(237-5613-00) and #8 Washer (Qty. 2) (242-5005-00)
(ASM. REF. ONLY 511-5130-00, Items 7–8)

2
For Securing Hardware,
see the Parts Table above,
under the item desired.
7

Adhesive side faces bracket, align

holes, then remove backing paper
7
and apply with even pressure.

2
LOCTITE
243
Qty. 2/per

7
2
LOCTITE 8
243

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 $UN %RWWRP $VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV
2SHQVDQGFORVHVWKH$UN/LG SUHYLRXVSDJH HPSW\LQJWKHIRXU  SLQEDOOVLQWRSOD\
>3DUWV7DEOH $VVHPEOHG9LHZRQWKHQH[WSDJH@
([SORGHG 9LHZ 5D
RI ,WHP >@
5 5D Qty. 1/per

LOCTITE Qty. 2/per

5D 243
5C
5B
5C
LOCTITE
243

5C

5C
For Securing Hardware, see the
Qty. 2/per Parts Table ON THE NEXT PAGE,
under the item desired.

5A

5D
5
5B

5C
5A
4 $OWHUQDWH 9LHZV RI ,WHP >@
5
$VVHPEOHG
6HF'UDZLQJV

Qty. 2/per
1
6 6
3

SW. 51

3
LOCTITE
243

SW. 50
3 2
6

For Securing Hardware, see the 4

Parts Table ON THE NEXT PAGE,
under the item desired. 2 Qty. 4 0RWRU
LOCTITE
243

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 $UN %RWWRP $VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV &RQWLQXHG
2SHQVDQGFORVHVWKH$UN/LG 3DJH HPSW\LQJWKHIRXU  SLQEDOOVLQWRSOD\
>([SORGHG9LHZ'UDZLQJVRQWKHSUHYLRXVSDJH@
Nr. ARK (BOTTOM) PARTS QTY. SPI PART Nr. Nr. ARK (BOTTOM) PARTS QTY. SPI PART Nr.
1 Bracket, Motor Mount (Ark Slider) 1 535-0143-00 5 Ark Slider Block (Elevator) Assembly 1 511-5103-00
Item 1 is secured below the P/F by: #8-32 X 3/4" SHWH Swage Ser. (Zinc) Wax (Qty. 4) Frame Weldment
(237-5975-02) into #8-32 T-Nut (Qty. 4) (240-5101-00) 5A 1 515-7679-00
5B Platform 1 535-0146-00
2 Motor & Gear Box without Conn. 1 041-5107-00
Item 17 is sec’d to Item 16 by: #10-32 X 1" PPH MS Sems (Zinc) (Qty. 4) (232-5406-00) 5C Glide Plate (White Nylon) 2 545-6325-01
Use Loctite 243 Motor with Connector use 511-5120-00. 5D Lid Lift White Cap 2 545-6327-00
Motor Specs.: 24VDC Reversible Model #7000D-DCM 12 RPM 35MM (.63" Shaft) RoHS Item 5C secured to Item 5B by: #8-32 X 3/8" PFH 82° U’cut MS (Qty. 2/per) (237-6030-00)
Crank Arm Asm. Weldment Item 5D secured to Item 5A by: #4-40 X 1/4" PFH MS (Black) (Qty. 1/per) (237-5983-02)
3 1 515-7678-00 Note: Items 5A & 5B may not be available individually, ordering of assembly required.
Item 3 is secured onto the Motor Shaft (Item 2) by: #8-32 X 1/4" Socket Set Scr. Cup Pt.
(Qty. 1) (237-6130-00) and is secured to the Connector Arm (Item 4) by: Retaining Ring, 6 Micro Switch (1-1/4" Actuator) 2 180-5010-04
1/4" ø (Qty. 1) (270-5002-00) Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
4 Connector Arm 1 545-6324-00 Item 6 is secured to Item 1 by: Switch Body Protect Plate (Qty. 1/per) (535-6539-00),
Item 4 is secured to Item 5 (5A bottom) by: Clevis Pin (Qty. 1) (251-5033-00) and #2-56 X 1/2" Uns. Serr. HWH #4 Head TR3 Black (Qty. 2/per) (237-5937-02)
Retaining Ring, 1/4" ø (Qty. 1) (270-5002-00). Note: Clevis Pin may include Retaining Ring. (ASM. REF. ONLY 500-7118-00, Items 1–6)

5D

5A 5D
5C 5B
5
For Securing Hardware,
see the Parts Table above,
under the item desired.

5C

5A
4
1

6HF'UDZLQJV
SW. 51

3
6
4
0RWRU

SW. 50 6

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 Magnet Assemby, Individual Parts Only

Q3
NO DIODE

not over
Playfield

THREADED CORE
PLUG ADJUSTMENT
To prevent playfield
wear and tear,

not under
Playfield

ensure the threaded

Sec. 4: Drawings ...

core plug is level

with the playfield!

flush & level

Playfield

Once flush & level

with the playfield,
apply Loctite 243
to the threads and
tighten the hex nut
up to the bushing.

Section 4, Chapter 2 Drawings for Major

Page 82 Assemblies & Ramps
 6KRRWHU6NLOO3ODVWLF5DPS$VVHPE\,QGLYLGXDO3DUWV2QO\ ,WHPV
Nr. SHOOTER RAMP PARTS QTY. SPI PART Nr. Nr. SHOOTER RAMP PARTS QTY. SPI PART Nr.
1® Shooter Plastic Ramp & Flap Riveted Asm. 1 510-5063-00 4
Gate, Switch & Sign Bracket 1 535-6303-02
Item 1® is secured @ flap [ SH1 ] by: #4 X 1/2" PFH (Zinc) (Qty. 2) (237-5840-00) Wire Form (for above gate)
and is sec’d @ exit [ SH2 ] by: Hex Spacer, 2-3/8" X 1/4" #6-32 Tap (Qty. 1) (254-5008-28) 1 535-6304-03
and is secured @ upper right corner [ SH3 ] by: #6-32 T-Nut (Qty. 1) (240-5002-00), Item 4 is secured to Item 1 by: #6-32 X 1/2" PPH Sems MS Ext. (Zinc) (Qty. 2)
Metal Post [Fasten] #6-32 Tap (Qty. 1) (530-5012-01), Plastic Post 1-Groove (Clear) (Qty. 1) (232-5202-00) and #6-32 Nylon Stop Nut (Qty. 2) (240-5005-00)
(550-5059-01), Hex Spacer, 1-3/4" X 1/4" #6-32 Tap (Qty. 1) (254-5008-10) Micro Switch
and by Gate Bracket [ SH4 ] below ramp edge by: Hex Spacer, 1-1/8" X 1/4" #6-32 Tap
5 1 180-5087-00
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
(Qty. 1) (254-5008-17) and above ramp edge by: Hex Spacer, 7/8" X 1/4" #6-32
Male/Female (Qty. 1) (254-5024-05). Each Hex Spacer gets secured at ramp edge by: Item 5 is secured to Item 4 by: Switch Body Protect Plate (Qty. 1/per) (535-6539-00) and
#6-32 X 3/8" PPH Sems (Zinc) (Qty. 1/per) (232-5201-00) and #6 Washer (Qty. 1/per) #2-56 X 1/2" Uns. Serr. HWH #4 Head TR3 Black (Qty. 2/per) (237-5937-02)
(242-5001-00) Also see Section 4, Chapter 1, Pages 54-55, Hex Spacers. (ASM. REF. ONLY 511-5148-00, Items 4–5)
For individual items use : [A] Shooter Plastic Ramp (No Parts) (545-6306-00) and
[B] Ramp Flap (535-0122-00). [B] is secured to [A] by: Rivet, 1/8" ø X 3/16" (Qty. 2) 6‡ Kit #1: Plastics (incl. 830-6087-00) 1 803-5000-A4
(245-5001-00) and #6 Lock Washer (Qty. 2) (246-5000-00) Item 6 is sec’d to Item 4 by: #6-32 X 1/4" SHWH Swage Ser. (Zinc) (Qty. 2) (237-5976-01)
Note: Individual Plastics (830-6073-XX & 830-6087-00) are not available individually,
2 Transceiver OPTO PCB Asm. with 15" Leads 2 500-6775-01 ordering of kit is required.
Application Note: Pairs required per switch and an OPTO Transceiver Amplifier PCB (ASM. REF. ONLY 500-5110-00, Items 1–5 + 6‡ : ordering of Plastics Kit required)
(520-5239-01). See Section 5, Chapter 4, (Yellow Pages) PCBs, Pages 130 – 131.
Item 2 is secured to Item 1 by: #6 X 3/8" PPH (Zinc) Type-25 (Qty. 2/per) (237-5880-00) 7 #555 Wedge Base Bulb (Clear) 1 165-5002-00
Mini-Jewel Plastic Post (Clear) 1 8 Wedge Base Socket (Laydown) 1 077-5026-01
3 550-5052-01 Light Reflector (Silver Plastic)
Item 3 is secured to Item 1 by: #6-32 X 1/2" PTH A (Zinc) (Qty. 1) (237-5809-00) 9 1 545-5409-01
1® SH3 7DNH1RWH
3 ® "R" indicates Item noted is
2 secured with rivet(s) as listed.
1® 4
1®
For Securing Hardware,
SH2 5
see the Parts Table above,
under the item desired.

6
SW. 49
3

SW. 39 SW. 39 4

2 2 1®
1® SH2

$OWHUQDWH 9LHZ RI ,WHP >1®

@ 1® SH4
ZLWK SDUWV DWWDFKHG 1®
1®

6HF'UDZLQJV
SH1
SH3

SW. 39
G.I. 7
6 2 3
9 5
4 1
G.I.
6
8 SW. 49
[B]

1®
9 6
8 SH4
4
1® 5
1
[A]
1® 5 ([SORGHG
SH1 9LHZ
For Securing Hardware, SW. 49
see the Parts Table above,
under the item desired. 4
1
[B]

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 Main Plastic Ramp Assemby, Individual Parts Only (Items 1-31)
Parts Table Below & Alternate Views on the Next Page
10 Page Subject to Change
9
8
7
6
5
4
1 RIGHT RAMP / FLAP ASSEMBLY - INDY 1 510-5062-00
2 BALL STOPPER ASSEMBLY 1 511-5114-00
DECAL KIT #42 - RIGHT RAMP - MID
DECAL KIT #41 - RIGHT RAMP - MID
DECAL KIT #40 - RIGHT RAMP - MID 1
DECAL KIT #39 - RIGHT RAMP - EXIT
DECAL KIT #43 - RIGHT RAMP - RIGHT
DECAL KIT #38 - RIGHT RAMP - FLANGE
DECAL KIT #37 - RIGHT RAMP - FLANGE
802-5000-A4 INCLUDES BELOW:
SEE 2-1 THRU 2-10 BOTTOM NEXT PAGE
3 CRYSTAL SKULL ASSEMBLY 1 511-5109-00
SEE 3-1 THRU 3-6 BELOW
SW. 60

Q38
Flash

Q25
Flash
820-6410-42
820-6410-41
820-6410-40
820-6410-39
820-6410-43
820-6410-38
820-6410-37

Q25
Flash
32

3-3
15
31

30

SW. 48
3-2
3-1
29

3-3

3-5 3-4
Sec. 4: Drawings ...

Q38
Flash
3-6
3-1 LED BOARD, 2-FLASH 1 520-5289-00
3-2 1/4" SELF RETAINING SPACER 2 254-5007-02
3-3 CRYSTAL SKULL 1 545-6329-00
2 3-4 CRYSTAL SKULL MTG BRKT 1 535-0201-00
2-1 – 2-10 3-5 SCREW, 6-32 x 5/8 PPH SEMS ZC 2 232-5203-00
32-1800 3-6 SCREW, 6-32 X 1/4" PPH SEMS 2 232-5200-00
Q5 4-10 DECAL KIT SEE UPPER RIGHT CORNER FOR DESC. 1 802-5000-A4
NO DIODE 11 RAMP PROTECTOR - LEFT 1 535-0187-00
12 SCREW, #6 X 1/2" PTH A 2 237-5809-00
13 RAMP PROTECTOR - RIGHT 1 535-0188-00
14 R/U SWITCH ASSEMBLY - SEE PAGE 48 1 515-6556-04-A4R
15 R/U SWITCH ASSEMBLY - SEE PAGE 48 1 515-6556-04-A4L
16 MINI MARS W/ EARS - FLUOR. ORANGE SB 2 550-5031-10
17 #89 BULB ASSY - HEAVY FILAMENT
SOCKET, 2-LUG S/U SHORT 2 165-5000-89-HF
077-5101-00
18 KIT BUTY #38 - RIGHT RAMP 830-6073-38 1 803-5000-A4
19 SPACER - 1/2" GRAY 2 254-5000-03
20 SPACER - 3/4" GRAY 1 254-5000-07
23

21 SPACER - 7/8" GRAY 1 254-5000-11

22 6-32 NYLOK STOP NUT 18 240-5005-00

Section 4, Chapter 2 Drawings for Major

Page 84 Assemblies & Ramps
 6
Main Plastic Ramp Assemby, Individual Parts Only
(Items 1-31) Continued Parts Tables below &

4
28

25

20
Alternate View Drawings on the Previous Page.
Page Subject to Change

22

24
14
18

22

13
SW. 48
19

24
21

Q25
27

12
Flash

Q38

13
Flash
19
28

11
Q25
26

Flash
27

16

17

11
23 RAMP PROTECTOR - RT EXIT 1 535-8167-00
24 SCREW, 6-32 X 1/2" PPH MS SEMS 10 232-5202-00
25 #6 WASHER 8 242-5001-00
26 SCREW, 6-32 x 5/8 PPH SEMS ZINC 4 232-5203-00
27 SCREW, 6-32 X 1" PPH SEMS 2 232-5206-00
28 SCREW, 6-32 X 1-1/2" PPH 2 237-5510-00
1

29 DECAL KIT #44 - RIGHT RAMP - MID 2820-6410-44 1 802-5000-A4

30 MINI POST - CLEAR 1 550-5052-01
31 SCREW, #6 X 3/8 PPH AB ZINC 1 232-5000-00
32 HEX SPACER, 2-1/2" X 1/4" #6-32 TAP 1 254-5008-16
22

SW. 60
2-1 BALL STOPPER COIL ASSEMBLY 1 515-7691-00
24

2-2 BRACKET - BALL STOPPER 1 535-0160-00

Sec. 4: Drawings ...

2-3 BALL STOPPER COVER - INDY 1 545-6337-00
2-4 SCREW, 6-32 X 1/4" PPH SEMS 2 232-5200-00
2-5 #6 WASHER 2 242-5001-00
15

2-6 SCREW, 8-32 x 3/8 PFH 82° U/C MS 1 237-6030-00

2-7 DECAL KIT #29 - PYRAMID - TOP 820-6410-29 1 802-5000-A4
2-8 DECAL KIT #30 - PYRAMID - SIDE 820-6410-30
2-9 DECAL KIT #31 - PYRAMID - BACK 820-6410-31
2-10 DECAL KIT #32 - PYRAMID - FRONT 820-6410-32

LOCTITE 243
9

32-1800
Q5
2-1

2-7 NO DIODE
10
8

2-6
2-2
23

2-3
22
24

0
2-1 2
2-9
24

2-8
7
23

Drawings for Major 2-5 Section 4, Chapter 2

2-4
Assemblies & Ramps Page 85
 %DFN3DQHO$VVHPE\,QGLYLGXDO3DUWV2QO\ ,WHPV
Nr. BACK PANEL PARTS QTY. SPI PART Nr.
1 Back Panel (No Parts) Black Wood 1 525-5678-00
Item 1 is secured below the playfield with Item 8 by: #8 X 1/2" SHWH AB (Zinc)
(Qty. 2/per) (234-5101-00)
(ASM. REF. ONLY 500-7124-00, Items 1-7 + 9 ‡ : ordering of Decal Kit required))
4 2 Socket, 2-Lug Staple Down 10 077-5000-00
4
)ODVK 3 #44 Bulb (Clear) Heavy Filament 10 165-5000-44-HF
4 Light Cover with tabs (Yellow) 1 550-5031-06
5 Socket, 2-Lug Stand-Up Short 1 077-5101-00
PARTS TABLE CONTINUED BELOW

4
Qty. 10 )ODVK
3
4 5
9
6
For Securing Hardware,
1 see the Parts Table below,
under the item desired.

7 Qty. 4

7
Qty. 2

8
8
6HF'UDZLQJV

Qty. 10

Nr. BACK PANEL PARTS QTY. SPI PART Nr.

6 #89 Bulb (Clear) Heavy Filament 10 165-5000-89-HF
7 Clamp, 1/2" (Single) 2 040-5000-06
Items 5-7 are secured to Item 1 by: #6 X 1/2" HWH (Qty. 1/per) (234-5001-02)
3
8 Bracket, Back Panel Mounting 2 535-8964-00 Qty. 10
Item 8 is secured to 1 by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2/per) (234-5101-00)
Note: For playfield location, see Page 47, Item 11.

9‡ Kit: Decal (incl. -10, Back Panel) 1 802-5000-A4

Note: Individual Decals (820-6410-XX) are not available individually, ordering of kit is
required. (ASM. REF. ONLY 500-7124-00, Items 1-7 + 9 ‡ : ordering of Decal Kit required))

6HFWLRQ&KDSWHU 'UDZLQJVIRU0DMRU
3DJH $VVHPEOLHV 5DPSV
 +RO\*UDLO &XS 6RFNHWV %XOEV,QGLYLGXDO3DUWV2QO\ ,WHPV
LAMP 80

For Securing Hardware, 3

see the Parts Table below,
under the item desired.
3
Diode on Terminal Strip under LP. 80
the playfield. See Section 5, 2
Chapter 2, Playfield Wiring,
Pages 96–97.
1

LAMP 73
1
1 1
5
4
6

LAMP 73

Nr. GRAIL (CUP) PARTS QTY. SPI PART Nr.

1 Holy Grail (Cup) Molded Plastic 1 880-5101-00
Item 1 is secured to Item 6 by: #6-32 X 3/8" PPH Sems (Zinc) (Qty. 3) (232-5201-00)
and #6 Washer (Qty. 2) (242-5001-00)
6 Wedge Base Socket (Special App.)
2 1 077-5206-00
3 #555 Wedge Base Bulb (Amber) 1 165-5054-03
4 3-Lug Laydown Socket (2-Lugs Bent) 1 077-5032-00
Item 4 is secured to Item 6 by: #4-40 X 1/2" PPH MS Sems (Zinc) (Qty. 1) (237-5813-00),
Black Rubber Ring O.D. 7/16" (Qty. 1, between socket bracket and plastic) (545-5348-17)
and #4-40 Nylon Stop Nut (Qty. 1) (240-5303-00)

5 #44 Bulb (Amber) Heavy Filament 165-5053-03-HF

LAMP 73
6 Kit #1: Plastics (includes -33) 1 803-5000-A4
1 Note: Individual Plastics (830-6073-XX & 830-6087-00) are not available individually,
ordering of kit is required.
5 (ASM. REF. ONLY 511-5125-33, Items 1–6 ‡ : ordering of Plastics Kit required)

'RXEOH6ZLWFK ,QOLQH 2IIVHW %UDFNHW$VVHPEO\,QGLYLGXDO3DUWV2QO\ ,WHPV

6HF'UDZLQJV
Nr. X2 SWITCH PARTS QTY. SPI PART Nr. Nr. X2 SWITCH PARTS QTY. SPI PART Nr.
1 Bracket, Double-Switch Inline 1 535-0178-00 3 Micro Switch Offset Wire (HP 951560-00) 1 180-5179-00
Item 1 is secured below by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2) (234-5101-00) Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
Micro Sw. Inline Wire (DA3 Ch. DA3A-BWDF) Items 2 & 3 are sec’d to Item 1 by: Switch Body Protect Plate (Qty. 1/per) (535-6539-00)
2 1 180-5178-00 and #2-56 X 1/2" Uns. Serr. HWH #4 Head TR3 Black (Qty. 2/per) (237-5937-02)
(ASM. REF. ONLY 500-5112-00, Items 1-3)

2
1
For Securing Hardware,
1 3 see the Parts Table above,
under the item desired.

SW. 61

3 SW. 61 SW. 62

2 3

SW. 62
3
3

'UDZLQJVIRU0DMRU 6HFWLRQ&KDSWHU
$VVHPEOLHV 5DPSV 3DJH
 **OPTIONAL** Shaker Motor Kit, 502-5027-00 (Rev. B), (Items 1-10)

1 1 502-5027-00 SHAKER MOTOR KIT

2-6 1 515-5893-01 SHAKER MOTOR ASM.
2 1 041-5029-04 MOTOR
3 1 545-5425-00 INSULATOR
4 1 535-6711-01 S.M. BRACKET
5 1 535-6711-02 S.M. BRACKET LEG
6 2 535-6727-01 WEIGHT
7 237-5911-00 SET SCREW
7 1 545-5241-00 PLASTIC COVER WITH
WARNING DECAL (820-6062-00)
8 1 515-5742-00 S.M. PCB + SPACERS
9 1 756-5027-00 INSTRUCTION SHEET (2-Sided)
1 756-5027-00T TEMPLATE
10 1 036-5537-00 Wiring (from back of cabinet to
front of cabinet (Item 8) S.M. PCB)
5 Click to view the
instructions and template online:
http://www.sternpinball.com/
756-5027-00RevB.html
These 2 sheets are included in the kit.
4

6
2
M.P. #3811R
Q8
8
Motor
Sec. 4: Drawings ...

6
9

Q8
Motor
2-6

10 Not Shown

Section 4, Chapter 2 Drawings for Major

Page 88 Assemblies & Ramps
6HFWLRQ  & KD SW H U   R I  
6FKHPDWLFV :LULQJ 3ULQWHG&LUFXLW%R DUG V
7DEOHRI&RQWHQWV
IRU6HFWLRQ
&KDSWHU%DFNER[:LULQJ²
X Table of Contents for Section 5......................................................................................................................................................89
X Coils Detailed Chart Table ..............................................................................................................................................................90
X Backbox I/O Power Driver Board Detailed Wiring Diagram.........................................................................................................91
X Backbox Board Layout Wiring Diagram........................................................................................................................................92
&KDSWHU3OD\ILHOG:LULQJ  ²
X General Illumination Circuit Detailed Wiring Diagram .................................................................................................................93
X Playfield Switch Wiring Diagram....................................................................................................................................................94
X Playfield Lamp Wiring Diagram......................................................................................................................................................95
X Playfield Terminal Strips, Fuses & Misc. Wiring Descriptions & Locations ..............................................................................96
X 2-Flipper Circuit Wiring Diagram ...................................................................................................................................................97
&KDSWHU&DELQHWDQG&RLQ'RRU:LULQJ ²
X Transformer Power Wiring Diagram ..............................................................................................................................................99
X Cabinet Wiring Diagram................................................................................................................................................................100
X Coin Door Wiring Diagram............................................................................................................................................................101
X Cabinet Universal Voltage Jumper Plugs (for use with Universal AC Cable, 036-5530-00 ONLY) .........................................102
&KDSWHU3ULQWHG&LUFXLW%RDUGV 3&%V ²
X Trough Up-Kicker Dual OPTO PCBs (515-0173-00 & 515-0174-00) Theory of Operation & Schematic .......................(Top) 103
Z Trough Up-Kicker Dual OPTO PCBs (515-0173-00 & 515-0174-00) Component Layout & Parts.................................(Bot) 103
X OPTO Troubleshooting .......................................................................................................................................................(Top) 104
Z Trough Dual OPTO PCBs Alignment / Tests for LED1 & LED2....................................................................................... 104-105
X I/O Power Driver PCB S.A.M. System (520-5249-00) Schematic (Sheet 1 of 4) ................................................................ 106-107
X I/O Power Driver PCB S.A.M. System (520-5249-00) Schematic (Sheet 2 of 4) ................................................................ 108-109
X I/O Power Driver PCB S.A.M. System (520-5249-00) Schematic (Sheet 3 of 4) .................................................................110-111
X I/O Power Driver PCB S.A.M. System (520-5249-00) Schematic (Sheet 4 of 4) .................................................................112-113
Z I/O Power Driver PCB S.A.M. System (520-5249-00) Component Layout .............................................................................114
Z I/O Power Driver PCB S.A.M. System (520-5249-00) Parts ...................................................................................................115
X CPU / Sound PCB S.A.M. System (520-5246-00) Schematic (Sheet 1 of 5) .......................................................................116-117
X CPU / Sound PCB S.A.M. System (520-5246-00) Schematic (Sheet 2 of 5) .......................................................................118-119
X CPU / Sound PCB S.A.M. System (520-5246-00) Schematic (Sheet 3 of 5) ...................................................................... 120-121
X CPU / Sound PCB S.A.M. System (520-5246-00) Schematic (Sheet 4 of 5) ...................................................................... 122-123
X CPU / Sound PCB S.A.M. System (520-5246-00) Schematic (Sheet 5 of 5) ...................................................................... 124-125
Z CPU / Sound PCB S.A.M. System (520-5246-00) Component Layout ...................................................................................126
Z CPU / Sound PCB S.A.M. System (520-5246-00) Parts ................................................................................................. 126-127
X Display Power Supply PCB (520-5138-00) Schematic................................................................................................................128
Z Display Power Supply PCB (520-5138-00) Component Layout & Parts .................................................................................128
X OPTO Interuptor PCB (520-5251-00) Schematic & Wiring ...............................................................................................(Top) 129
Z OPTO Interuptor PCB (520-5251-00) Component Layout & Parts ................................................................................(Bot) 129
X Playfield Switches OPTO Transceiver PCBs (500-6755-01) Schematic..........................................................................(Top) 130
Z Playfield Switches OPTO Transceiver PCBs (500-6775-01, Qty. 2/pairs) Component Layout & Parts ........................ (Top) 130
X Playfield OPTO Transmitter / Receiver Amplifier PCB (520-5239-01) Schematic .......................................................... (Bot) 130
Z Playfield OPTO Transmitter / Receiver Amplifier PCB (520-5239-01-ASY) Component Layout & Parts ...................... (Top) 131
Z Playfield OPTO Transmitter / Receiver Amplifier PCB (520-5239-01) Wiring (General) ................................................(Bot) 131
X Lamp (X20 #555) PCB (520-5287-00) Schematic & Wiring ................................................................................................. 132-133
Z Lamp (X20 #555) PCB (520-5287-00) Component Layout & Parts ........................................................................................134
X Auxiliary (3X Transistor) Driver PCB (in Backbox) with the Coin/Ticket Meter and Ticket Disp. Wiring Diagram ...............135
X LED (X2 Flash) PCB (520-5289-00) Schematic & Wiring ...........................................................................................(Top) 136-137 6HF6FKHPDWLFV
Z LEX (X2 Flash) (520-5289-00, Qty. 4) Component Layout & Parts................................................................................(Bot) 136
X Auxiliary (3X Transistor) Driver PCB Schematic ..............................................................................................................(Top) 138
Z Auxiliary (3X Transistor) Driver PCB Component Layout...............................................................................................(Bot) 138

6FKHPDWLFV 6HFWLRQ&KDSWHU
:LULQJ 3&%V 3DJH
 Use the below Coils Detailed Chart Table in conjunction with Sec. 5, Chp. 1, Backbox Note on Q1: Can substitute with
I/O PCB Detailed Wiring Diagram (I/O J6, J7, J8 & J9) & PCB Layout Wiring Diagram: 25-1240 (090-5034-ND) Coil
+LJK &XUUHQW &RLOV *URXS  Drive Driver
Transistor Ouput PCB
Power Line
Color
Power Line
Connection
Power Drive Transistor D.T. Control
Voltage Control Line Color Line Connect
Coil GA-Turn
or Bulb Type

#1 TROUGH UP-KICKER Q1 YEL-VIO J10-P9/10 50VDC BRN-BLK J8-P1 26-1200

090-5044-ND
!
23-8000 !
#2
#3
AUTO LAUNCH
ARK MAGNET
Q2

Q3
5 YEL-VIO

VIO-YEL
J10-P9/10 50VDC

J10-P8 50VDC
BRN-RED

BRN-ORG
J8-P3

J8-P4
090-5001-ND
22-6500 !
511-5065-ND

#4 GRAIL SCOOP EJECT Q4

I/O YEL-VIO J10-P9/10 50VDC BRN-YEL J8-P5 24-9400 !
Power 090-5036-ND

#5 BALL STOP (RAMP) Q5 Driver YEL-VIO J10-P9/10 50VDC BRN-GRN J8-P6 32-1800 !
090-5031-00-ND

#6 TEMPLE MOTOR / RELAY Q6 6 BROWN J7-P1 20VDC BRN-BLU J8-P7 Relay Asm
500-6700-00

#7 ARK DIVERTER (RAMP) Q7 YEL-VIO J10-P9/10 50VDC BRN-VIO J8-P8 23-1500 !

090-5062-ND0

#8 SHAKER MOTOR (OPTIONAL) Q8 RED-WHT J17-P7 16VAC BRN-GRY J8-P9 S. Motor Kit
12VDC 502-5027-00
+LJK &XUUHQW &RLOV *URXS  Drive Driver
Transistor Ouput PCB
Power Line
Color
Power Line
Connection
Power Drive Transistor D.T. Control
Voltage Control Line Color Line Connect
Coil GA-Turn
or Bulb Type

#9 LEFT POP BUMPER Q9 YEL-VIO J10-P9/10 50VDC BLU-BRN J9-P1 26-1200 !

090-5044-ND
26-1200 !
#10 TOP POP BUMPER
#11 BOTTOM POP BUMPER
Q10

Q11
5 YEL-VIO

YEL-VIO
J10-P9/10 50VDC

J10-P9/10 50VDC
BLU-RED

BLU-ORG
J9-P2

J9-P4
090-5044-ND
26-1200 !
090-5044-ND

#12 RIGHT POP BUMPER Q12

I/O YEL-VIO J10-P9/10 50VDC BLU-YEL J9-P5 26-1200 !
Power 090-5044-ND

#13 L. SLINGSHOT (TOP) Q13 Driver BROWN J7-P1 20VDC BLU-GRN J9-P6 23-8000 !
090-5001-ND
23-8000 !
#14 R. SLINGSHOT (TOP) Q14 6 BROWN J7-P1 20VDC BLU-BLK J9-P7 090-5001-ND

#15 LEFT FLIPPER (50v RED/YEL) Q15 GRY-YEL~3A 22-1080 !

Fuse~RED-YEL J10-P6/7 50VDC ORG-GRY J9-P8 090-5032-ND

#16 RIGHT FLIPPER (50v RED/YEL) Q16 BLU-YEL~3A 22-1080 !

Fuse~RED-YEL J10-P6/7 50VDC ORG-VIO J9-P9 090-5032-ND
/RZ &XUUHQW &RLOV *URXS  Drive Driver
Transistor Ouput PCB
Power Line
Color
Power Line
Connection
Power Drive Transistor D.T. Control
Voltage Control Line Color Line Connect
Coil GA-Turn
or Bulb Type

#17 LEFT SLINGSHOT Q17 BROWN J7-P1 20VDC VIO-BRN J7-P2 23-8000 !
090-5001-ND
23-8000 !
#18 RIGHT SLINGSHOT
#19 FLASH: TEMPLE OF DOOM
Q18

Q19
5 BROWN

ORANGE
J7-P1

J6-P10
20VDC

20VDC
VIO-RED

VIO-ORG
J7-P3

J7-P4
090-5001-ND
#89 Bulb
165-5000-89
I/O #89 Bulb
#20 FLASH: RAIDERS Q20 ORANGE J6-P10 20VDC VIO-WHT J7-P6
Power 165-5000-89

#21 FLASH: SLINGSHOT (X2) Q21 Driver ORANGE J6-P10 20VDC VIO-GRN J7-P7 #89 Bulb
165-5000-89

#22 FLASH: SANKARA STONE Q22 6 ORANGE J6-P10 20VDC VIO-BLU J7-P8 #89 Bulb
165-5000-89

#23 FLASH: KINGDOM Q23 ORANGE J6-P10 20VDC VIO-BLK J7-P9 #89 Bulb
165-5000-89

#24 OPTIONAL (e.g. COIN METER) Q24 RED J16-P4>8 5VDC VIO-GRY Optional
J7-P10
5VDC
! Coil Note: ! -ND means ’No Diode’. -00B or -00T can be used for coil replacements, but the diode must be removed. Call for more info.
/RZ &XUUHQW &RLOV *URXS  Drive Driver
Transistor Ouput PCB
Power Line
Color
Power Line
Connection
Power Drive Transistor D.T. Control
Voltage Control Line Color Line Connect
Coil GA-Turn
or Bulb Type

#25 FLASH: RAMP (X2) Q25 ORANGE J6-P10 20VDC BLK-BRN J6-P1 #89 Bulb
165-5000-89
!
5
#26 MAP EJECT Q26 BROWN J7-P1 20VDC BLK-RED J6-P2 26-1200
090-5044-ND

#27 ARK MOTOR Q27 BROWN J7-P1 20VDC BLK-ORG J6-P3 Motor
511-5120-00
I/O #89 Bulb
#28 FLASH: BACKPANEL LEFT Q28 ORANGE J6-P10 20VDC BLK-YEL J6-P4
Power 165-5000-89

#29 FLASH: ARK FRONT Q29 Driver ORANGE J6-P10 20VDC BLK-GRN J6-P5 #89 Bulb
6HF6FKHPDWLFV

165-5000-89

#30 SWORDSMAN MOTOR / RELAY Q30 6 BROWN J7-P1 20VDC BLK-BLU J6-P6 Relay Asm
500-6700-00

#31 FLASH: POP BUMPER (X3) Q31 ORANGE J6-P10 20VDC BLK-VIO J6-P7 #89 Bulb
165-5000-89

#32 FLASH: CRUSADE Q32 ORANGE J6-P10 20VDC BLK-GRY J6-P8 #89 Bulb
165-5000-89
Note: In Test Flash Lamps Menu ("Flash" Icon), only Flashers are tested. This Game: Q19 – Q23, Q25, Q28, Q29, Q31, Q32, Q36 – Q38
$X[ 2XW /(' )ODVK /DPSV Data
Out
Driver
Ouput PCB
Power Line
Color
Power Line
Connection
Power
Voltage
Ground
Color
Ground
Connection
Drive (Data)
Line Color
Drive (Data)
Line Connect
Flash Type
PCB

#36 FLASH: ARK LEDS (X2) B3 5 ORANGE J6-P10 20VDC BLK J16-P9>15 ORG-YEL J2-P5 LED PCB
520-5289-00
I/O LED PCB
#37 FLASH: SWORDSMAN LEDS B4 ORANGE J6-P10 20VDC BLK J16-P9>15 ORG-GRN J2-P6
6
P.D. 520-5289-00

#38 FLASH: SKULL LEDS B5 ORANGE J6-P10 20VDC BLK J16-P9>15 ORG-BLU J2-P7 LED PCB
520-5289-00

6HFWLRQ&KDSWHU %DFNER[
3DJH :LULQJ
 Backbox I/O Power Driver Board Relay with Wiring + Conn. 500-6700-00 (Qty. 2) for: PICKER RELAY
#PC113-2C-C1-24D-LD COIL
(Coils Q1-Q32) Temple Captive Ball Target Up/Down Motor and 24VDC 12A 250VAC/28VDC

47Z7 Red 14mm

10A 277VAC 1/2HP 125VAC
Detailed Wiring Diagram Swordsman Open/Close Motor (above Map Room)

150-5010-00
Metal Oxide
Varistor
Partial View (520-5249-00) 1 N.C. 2
3 N.O. 4
For complete and detailed schematics of the Connectors, Coils, Flash Lamps, Bridges and Fuses noted below, see the I/O Power Driver PCB (Sheets 1 & 2 of 4) in Section 5, Chapter 4, Printed Circuit Boards (PCBs).
#89 (Clear) X2 #25 Flash:
J6q 5 COMM 6
BLK-BRN Ramp (X2)
J6: P1-8 Q25 1

DRY

+28
#26

BLK-ORG
+20VDC BLK-RED Map Eject 26-1200 7 8
Q26 2

WHT
#27 Ark

BRN
VIO
Q25-Q32 BLK-ORG Motor BRN-WHT
Q27 3 511-5120-00
#89 (Clear) X1 #28 Flash: 1/4A S.B.
BLK-YEL Backpanel LT 250V SLO-BLO 2 1 4 3
FLASH LAMPS or
LOW CURRENT

Q28 4

BLK-BLU

BRN

BLK-ORG

WHT
DRIVE
SOLENOIDS
J6

#89 (Clear) X1 #29 Flash:

BLK-GRN Ark Front
Q29 5

SWITCHED AC
#30 Swords.
BLK-BLU Motor / Relay BLK-BLU
Q30 6
#89 (Clear) X3 #31 Flash: J11-P2
BLK-VIO Bumper (X3) FUSE F5
J6 Q25-Q32 Q31 7 I/O PCB
#89 (Clear) X1 #32 Flash:
TIP122 +48VDC
(110-0067-00) BLK-GRY Crusade
Q32 8 BLK-ORG
AC VOLTAGES
[ 9 KEY ] SYNCRONOUS
ORG 20VDC LOW POWER q J10-P1
MOTOR
24VAC 50/60HZ
BRDG2 / F10 J6-P10
10
FUSE F6 12 RPM 3W
BRN CLOCKWISE
J7-P1 J7q BRN 20VDC LOW POWER q I/O PCB
FUSE F10 20VDC q (041-5103-02)
J7: P1-9 1 +24VAC
#17 Left YEL-BLK
VIO-BRN Slingshot 23-800 2 1
+20VDC Q17 2
VOLTAGE
OUTPUTS

BLUE

BLUE
Q17-Q24 #18 Right
VIO-RED Slingshot 23-800 BRN
Q18 3
#89 (Clear) X1 #19 Flash: 20VDC q
VIO-ORG Temple of Doom Motor
LOW CURRENT
FLASH LAMPS
SOLENOIDS or

Q19 4 with Wiring + Conn.

J7

#89 (Clear) X1 Q30 = 041-5103-02

[ 5 KEY ] #20 Flash: 511-5063-02
VIO-WHT Raiders
Q20 6
#89 (Clear) X2 #21 Flash: PICKER RELAY
VIO-GRN Slingshot (X2) #PC113-2C-C1-24D-LD COIL
Q21 7 24VDC 12A 250VAC/28VDC

47Z7 Red 14mm

#89 (Clear) X1 10A 277VAC 1/2HP 125VAC
#22 Flash:

150-5010-00
Metal Oxide
VIO-BLU Sankara Stone
J7 Q17-Q24 Q22 8

Varistor
#89 (Clear) X1 1 N.C. 2
TIP122 #23 Flash:
3 N.O. 4
(110-0067-00) VIO-VIO Kingdom
Q23 9
J16-P4>8 5 COMM 6
#24 Optional RED I/O PCB
5VDC q

DRY
OPTIONAL

+28
VIO-GRY Coil (e.g. Meter)

BLK-ORG
Q24 10 +05VDC 7 8
J8q #1 Trough Up- RED
BRN-BLK 23-800
25-1240or
Kicker (4-Ball) POWER

WHT
BRN
26-1200
J8: P1-9 Q1 1

VIO
OUT
[ 2 KEY ] #2 Auto Launch
+50VDC BRN-RED 23-800 (Shooter) J10-P8
Q2 3
BLK

BLK

22- FUSE F7 2 1 4 3
#3 Ark VIO-YEL
Q1-Q8 I/O PCB

BRN-BLU

BRN

BLK-ORG

WHT
650 50VDC q

DRIVE
BRN-ORG Magnet
Q3 4 CONNECTOR +50VDC
#4 Grail Scoop J10-P9/10 VIO-YEL

SWITCHED AC
SOLENOIDS

24-940 FUSE F8
J8

BRN-YEL Eject YEL-VIO HIGH

CURRENT

Q4 5
50VDC q I/O PCB POWER
HIGH

#5 Ball Stop +50VDC

BRN-GRN 32-1800 (Ramp) J11-P2
Q5 6 YEL-VIO
HIGH POWER FUSE F5
#6 Temple I/O PCB
BRN-BLU Motor / Relay BRN-BLU
J8 Q1-Q8 Q6 7 +48VDC
STP22NE10L #7 Ark Diverter More Shaker Motor details in the BLK-ORG
(110-0106-00) BRN-VIO 23-1500 (Ramp) Cabinet Wiring Diagram on Page 100. AC VOLTAGES
Q7 8
J17-P7
BRN-GRY
#8 Shaker
Motor (Optional) qOPTIONALq I/O PCB
SYNCRONOUS
MOTOR
+12VDC J10-P1 24VAC 50/60HZ
Q8 9 +16VAC FUSE F6 12 RPM 3W
J9q #9 Left Pop RED-WHT I/O PCB
CLOCKWISE
order 502-5027-00 SM Kit

(041-5103-00)
SHAKER MOTOR

BLU-BRN 26-1200 Bumper P6 [ J1 ] P2

x
TRANS-
J9: P1-9 Q9 1 Shaker FORMER +24VAC
#10 Top Pop Motor PCB
x
YEL-BLK 2 1
+50VDC BLU-RED 26-1200 Bumper P3 [ J2 ] P2 VOLTAGE
Q10 2 OUTPUTS
BLUE

BLUE
BLUE

#11 Bottom Pop

RED

[ 3 KEY ] +12VDC
Q9-Q16 BLU-ORG 26-1200 Bumper BRN
Q11 4
20VDC q
#12 Right Pop Sec. 5: Backbox ...
SOLENOIDS

26-1200 Bumper
J9

BLU-YEL Motor
CURRENT

Q12 5 with Wiring + Conn.

HIGH

Q6 = 041-5103-00
#13 Left 511-5063-00
BLU-GRN Slingshot (Top) 23-800
Q13 6 Note: The "-02" is identical to the "-00" motor with the
following important exception : The "-02" has a divet
#14 Right hole on the flat portion of the motor shaft to keep the
BLU-BLK Slingshot (Top) 23-800 Set-Screw in place (due to the space restraints under
J9 Q9-Q16 Q14 7 the playfield, the motor has to be mounted upside-
down in this Swordsman Assembly).
STP22NE10L #15 (Lower)
(110-0106-00) ORG-GRY 22-1080 Left Flipper GRY-YEL RED-YEL J10-P6/7
Q15 8
50VDC q I/O PCB
#16 (Lower) p 3A S.B. q
22-1080 Right Flipper 250V SLO-BLO +50VDC
ORG-VIO BLU-YEL
Q16 9 RED-YEL
VOLTAGE
OUTPUTS

Note: ALL FUSES RATED Q15–Q16 & Q27: These Coil Fuses are
Coil Diodes (1N4004) are integrated 250V SLO-BLO located under the playfield NEAR the #33 – #35 Note: If this game is equiped with
on the I/O Power Driver PC Board. I/O FUSE CHART INFO IN assembly, see Sec. 5, Chp. 2, P/F Wiring. an optional Ticket Dispenser & Meter, see the
BACKBOX & PAGE DR. 1 end of Sec. 5, Chapter 4 for wiring information.
Ensure Std. Adj. 56, Ticket Dispenser = YES.

Backbox Section 5, Chapter 1

Wiring Page 91
 Backbox
Wiring
+50VDC
+50VDC
+50VDC
+50VDC
+50VDC

-12VDC

Ground
Ground
Ground
Ground
Ground
Ground
+ 5VDC
+ 5VDC
+ 5VDC
+ 5VDC
+ 5VDC
+12VDC
-12VDC
YEL-BLK 24VAC

13VAC
13VAC
16VAC
16VAC

19VAC
GRY 19VAC

CONNECT THE J11 J10

BLK-ORG 48VAC

1 2 3 4 5 6
BLK-YEL 48VAC

1 2 3 4
YEL-BLK 24VAC

RED 8VAC

RED 8VAC
BLK GND
GND
GND

GND

20-PIN RIBBON POWER AUDIO

CABLE TO I/O J1
GRY-WHT +12V
BLK-WHT

BLK
BLK
BLK
BLK
BLK
BLK

RED-BLK CH A-
GRY-WHT
VIO-YEL
YEL-VIO
YEL-VIO
RED-YEL
RED-YEL

RED-WHT
9 BLU-WHT
BLU-WHT

RED
RED
RED
RED
RED
4 GRY-GRN
-RED

5 GRY-WHT

GRY-RED

BLK Ground
BLK
BLK

BLK Ground RED-WHT CH A+

19 YEL-BLK CH B-
7 WHT

BLK-WHT -12V
YEL-WHT CH B+
KEY
KEY

BLK Ground
RED +5V
1

J9
8

visit http://www.sternpinball.com/GAME-code.shtml
3
6

Reset
1
2
3

RED
2 1 Button

For the latest boot Flash EPROM code or

1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
AC VOLTAGES 9 6 3

game code for your USB Memory Stick,

J11 VOLTAGE OUTPUTS audio POWER OUT J12
J10 8 5 2 J16 SWITCH RETURNS COIN CELL
BLACK
TAN-BLK
10 Ground BATTERY
J14 7 4 1 9 COL 9
Important:

5.7VAC G.I.s FROM

When connecting any 20 19 TAN-RED 8 COL 10
(CR2430 3V)
Ribbon Cable, always TAN-ORG
TRANSFROMER ensure the " Red Line " TAN-YEL
7 COL 11
POWER FROM THE side of the ribbon cable J1 6 COL 12
YELLOW TRANSFORMER KEY
goes to the Pin-1 side 5 J15

PORT
YELLOW TAN-GRN

USB
YELLOW J17 of any Dual 0.1" Header
2 1 TAN-BLU
4 COL 13
1 2 3 Connector. 3 COL 14
TAN-VIO 2 COL 15
4 5 6
YEL-WHT TAN-WHT 1 COL 16

XILINX JTAG PROCESSOR

YEL-WHT
YEL-WHT J3 J6 CPU/SOUND PC BOARD J7
AUXILLIARY SWITCH RETURNS
GENERAL ILLUMINATION

9 VIOLET
BROWN
INPUT BLACK
WHT-BRN
10 Ground (S.A.M. System)

Boot FLASH EPROM

8 GREEN 1 9 COL 1
YELLOW ORANGE WHT-RED
7
BRN-WHT YELLOW
2
3 WHT-ORG
8
7
COL 2
COL 3
520-5246-00
6 GREEN WHT-YEL
KEY 4 COL 4
5
4 WHT-VIO I/O POWER DRIVER PC BOARD BLU E 5 WHT-GRN
6
5 COL 5 J8
WHT-GRN VIOLET 6 KEY 4
3
2 WHT-YEL (S.A.M. System) GREY
PINK
7 WHT-BLU
WHT-VIO
3 COL 6
1 WHT-BRN 8 2 COL 7
BRN-WHT WHT-GRY
520-5249-00 9 1 COL 8

DISPLAY
J15 GRN-WHT 10
BLU-WHT 11 BLACK Ground
G.I.s PNK-WHT LT GRN-GRY
10
12 9 SW D=24 14-PIN RIBBON
+18VDC
BLUE
LT GRN-VIO 8 SW D=23 MOVE TO 'ON'
POSITION
CABLE TO J5
10 LT GRN-BLU 7 SW D=22 DOT DISPLAY
YEL-BRN ORG-BRN 1 LT GRN-BLK TO UPDATE
9 ORG-RED 6 SW D=21 P2
vDIP SW. 8

SERIAL PORT
8 YEL-RED 2 LT GRN-YEL
YEL-ORG ORG-BLK 5 SW D=20
7 3 LT GRN-ORG v ON 8
YEL-BLK KEY 4 SW D=19 7
6 4 LT GRN-RED SW D=18
5 YEL-GRN ORG-YEL
ORG-GRN
5 KEY
3
2
6
5 J3 J2 J1
4
YEL-BLU 6 LT GRN-BRN 4 DEDICATED SWITCHES DEDICATED SWITCHES SWITCH STROBES J4
YEL-VIO ORG-BLU 1 SW D=17 3
3 7
ORG-VIO

SW D-12
SW D-14

SW D-10
SW D-16

SW D-13
SW D-15

SW D-11
KEY J13 2

Ground

Ground
Ground

SW D-2
SW D-4
SW D-8
SW D-6

SW D-3
SW D-5

SW D-1
SW D-7
SW D-9
8

ROW 8

ROW 2
ROW 1
ROW 7
ROW 5
ROW 6
ROW 4
ROW 3
2

OFF
YEL-GRY ORG-GRY 9
1
1 ORG-WHT DED. SWITCHES
10 SW1
J13 J2 DIP
LAMP COMLUMS SWITCH 10 9 8 7 6 5 4 3 2 1 12 11 10 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1

+20VDC
+20VDC
18V J9 J8 J7 AUXILLIAR
J12 HIGH CURRENT HIGH CURRENT LOW CURRENT J6 OUTPUT
LAMP ROWS GROUND SOLENOIDS SOLENOIDS SOLENOIDS FLASH LAMPS

KEY

KEY
N.U.

KEY

GRN-ORG
GRY-ORG

GRN-GRY
GRY-GRN

GRN-RED
GRN-BRN
PNK-ORG
PNK-GRN
GRY-RED
GRY-BRN

PNK-GRY

PNK-BRN

GRN-BLU
PNK-RED

GRN-YEL
GRN-BLK
GRY-BLU
GRY-BLK

GRY-YEL
12 11 10 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 10 9 8 7 6 5 4 3 2 1 10 9 8 7 6 5 4 3 2 1

PNK-BLU

GRN-VIO
PNK-YEL
GRY-VIO

PNK-VIO
BLACK

BLACK

BLACK
KEY
KEY
N.C.

KEY

KEY
KEY
ORG-GRY
Backbox Board Layout Wiring

BRN-ORG
RED-WHT

RED-ORG
RED-GRN

BRN-GRN
RED-GRY

BRN-GRY

BRN-RED
BLU-ORG
RED-BRN

BLK-ORG
BLU-GRN

BLK-GRN
BLU-RED

VIO-ORG
RED-BLU

BRN-BLU

BLK-GRY
BLU-BRN

ORANGE
RED-BLK

ORG-VIO

BLK-RED
VIO-GRN
RED-YEL

BRN-YEL

BRN-BLK

BLK-BRN
VIO-RED
VIO-GRY

VIO-BRN
RED-VIO

BRN-VIO
BLU-YEL

BLK-BLU
BLU-BLK

BLK-YEL
VIO-BLU
VIO-YEL
VIO-BLK

BLK-VIO
BROWN
RED

DISPLAY POWER SUPPLY PCB

CN1 to Transformer (Cabinet)

Section 5, Chapter 1
14 NOT USED 13 NOT USED 128 DOT MATRIX 520-5138-00
12 GROUND 11 SER. DATA
{
x 32 DISPLAY PCB
10 GROUND 09 PIX CLOCK
{

CN2 to Display
08 GROUND 07 COL. LATCH YEL-BLK

J4 BABCOCK
– 110VDC
RED – 110VDC 1

– 98VDC
06 GROUND 05 ROW CLOCK

+68VDC
+12VDC
+5VDC GRY-YEL

Ground
Ground
7

+5VDC
04 GROUND 03 ROW DATA BLUE 6 +18VDC – 98VDC 2 KEY
02 GROUND 01 DISPLAY ENABLE KEY 5
3
YELLOW
BLACK 4 Ground Ground 4
BLACK
BABCOCK J1 WHITE 3 110VAC (COMMON) Ground 5
RED

8
7
6
5
4
3
2
1
DALE P2 BLK-RED +5VDC 6
DALE P1 2 110VAC BLUE

Page 92
WHT-GRN 1 88VAC +12VDC 7
VIO-YEL
Diagram

+68VDC 8
CN1

KEY
CN2

GRY-YEL
YEL-BLK
YELLOW
VIO-YEL

BLACK
BLUE
RED
14-PIN
RIBBON
CABLE TO
CPU / SOUND
J5 DISPLAY
Sec. 5: Backbox ...
Section 5 Chapter 2 of 4
Playfield Wiring
General Illumination Circuit Detailed Wiring Diagram Partial View I/O Power Driver PCB
Below: Bottom of Playfield shown +5VDC (520-5249-00)
as if leaning up against the Backbox. 20
qF1
3 D0 VCC Q0
2
U21 G.I. RELAY 5A
250V
L9
74HCT273 RLY1 SLO-BLO
DATA LATCH 1 D50
U20 11 CLK 5 NC R14 1N4148 AP2012EC
3 NO LED
10 qF2 680
V GND 2
6 NC 5A L10
4 NO 250V
SLO-BLO
7 D51
+20VDC
D49 R15 1N4148 AP2012EC
LED
Y V 1N4004
8 qF3 680
Y V R150 FRL264
1K Q44 5A
250V
L11

AP2012EC
MMBT3904 G.I.s 5.7VAC SLO-BLO
Y V RELAY TRANSISTOR INPUT FROM D52

LED
DRIVER TRANSFORMER R16 1N4148
Y V qJ14 qF4 680
YEL
1

J14 TRANSFORMER
YEL 5A L12

2ndary 5.7v AC
2 250V
YEL SLO-BLO

Primary
3 D53
Y V

AP2012EC
LED
Above Playfield:
G.I. in Light Reflector on
Above Playfield:
G.I. in Light Reflector on YEL-WHT 4 R17 1N4148
Left Slingshot Plastic. Right Slingshot Plastic.
V YEL-WHT 5 680
YEL-WHT 6
Y Transformer

J15q
J15

[ 5 KEY ]
Y PRI-103.5-115-207-230V 9 8 7 6 4 3 2 1
50/60Hz 750VA
Y V CLASS 130 EPBO GENERAL ILLUMINATION
Above Playfield: V V
G.I. in Light Reflector by
Ramp above X5 Targets.
V
9 8 7 6 4 3 2 1
V J15-P6 to J15-P1 (Fuse F1)
VIOLET

GREEN

YELLOW

BRN-WHT

WHT-VIO

WHT-GRN

WHT-YEL
B = BRN-WHT to WHT-BRN
Y Above Playfield: Location: Mainly Upper Left
G.I. in Light Reflector Corner X14
behind Top Pop Bumper. WHT-BRN

#44 Bulb
14 ea.
Circuit
B 1
B V #1 #2 #14*
V V Note: Various Colors, see
Page 62 for Part Numbers.
B
V J15-P7 to J15-P2 (Fuse F2)
Y J2
J3 J4

Y = YELLOW to WHT-YEL
Y J1
Location: Mainly Left Playfield &
V
J5

Upper Right Corner X16

WHT-YEL
V

#555 Bulb
#44 Bulb
14 ea.
Circuit

2 ea.
B Y 2
B YEL #1 #2 #16*
B B B
B B
Note: GI above P/F are #555 Bulbs.
B B Y Y
Y J15-P8 to J15-P3 (Fuse F3)
B G = GREEN to WHT-GRN
B Y Location: Back Panel X10
WHT-GRN + US Coin Door X2 (Euro X3)
This Edge is “Top of Playfield”. YEL-WHT
Coin On Coin
#555 Bulb
#44 Bulb

Door Door
10 ea.

Circuit
Sec. 5: Playfield ...
2 ea.

G Below: Located at the top of the

G
P/F, rear view of the Back Panel. 3
GRN #1 Wiring #3 #12*
G Harness
Connector YEL
GIs on rear G
Back Panel G J15-P9 to J15-P4 (Fuse F4)
(X10) G V = VIOLET to WHT-VIO
G Location: Main Right Playfield X18
G WHT-VIO Note: GI above P/F are #555 Bulbs.

G
#555 Bulb
#44 Bulb

WHT-
16 ea.

G Circuit
2 ea.

GRN

GREEN
4
VIO #1 #2 #18*
* G.I. Bulb quantities may change during production.

Playfield Section 5, Chapter 2

Wiring Page 93
 Playfield
Wiring
Please NOTe: Switch & Lamp Descriptions may differ slightly than that of the Dot Display due to space restraints.
Switch Return IC Source Number : LM339D Surface Mount Switch Return IC Source Number : LM339D Surface Mount
IC-U22A

IC-U22B

IC-U22C

IC-U22D

IC-U15A

IC-U15B

IC-U15C

IC-U15D

IC-U35A

IC-U35B

IC-U35C

IC-U35D

IC-U40A

IC-U40B

IC-U40C

IC-U40D
Ground

Ground
SWITCH RETURNS

SWITCH RETURNS

J12
J12p
[ 4 KEY ]

[ 5 KEY ]
BLACK J6q
J6
10

10

1
CPU/Sound PCB
WHT-BRN

WHT-RED

WHT-ORG

WHT-YEL

WHT-GRN

WHT-BLU

WHT-VIO

WHT-GRY

BLACK

TAN-BLK

TAN-RED

TAN-ORG

TAN-YEL

TAN-GRN

TAN-BLU

TAN-VIO

TAN-WHT
p Switch Returns p
Return 1 Return 2 Return 3 Return 4 Return 5 Return 6 Return 7 Return 8 Return 9 Return 10 Return 11 Return 12 Return 13 Return 14 Return 15 Return 16
Switch 01 Switch 02 Switch 03 Switch 04 Switch 05 Switch 06 Switch 07 Switch 08 Switch 09 Switch 10 Switch 11 Switch 12 Switch 13 Switch 14 Switch 15 Switch 16
JONE (S) JON (E) S JO (N) ES J (O) NES (J) ONES RT ORBIT IND (Y) IN (D) Y I (N) DY (I) NDY GRAIL TRANSFER LT ORBIT LT ORBIT TOURNA- START
SPINNER EJECT TROUGH (BOTTOM) SPINNER MENT START BUTTON
D D D D D D D D D D D D D D D D
O O O O O O O O O O O O O O O O
Drive 1

T T T T T T T T T T T T T T T T
S S S S S S S S S S S S S S S S
Switch 17 Switch 18 Switch 19 Switch 20 Switch 21 Switch 22 Switch 23 Switch 24 Switch 25 Switch 26 Switch 27 Switch 28 Switch 29 Switch 30 Switch 31 Switch 32
ARK AUTO TROUGH TROUGH TROUGH Trough TROUGH SHOOTER LEFT L. RETURN L. SLING- R. SLING- R. RETURN RIGHT LEFT TOP BOTTOM
u D
LOAD #4 (LEFT)
D D
#3
D
#2 #1 (RIGHT)
D D
JAM
D
LANE OUTLANE
D D
LANE
D
SHOT
D
SHOT
D
LANE OUTLANE
D D
BUMPER
D
BUMPER
D
BUMPER
Switch O O O O O O O O O O O O O O O O
Drive 2

T T T T T T T T T T T T T T T T
Drives S S S S S S S S S S S S S S S S
u
Switch 33 Switch 34 Switch 35 Switch36 Switch 37 Switch 38 Switch 39 Switch 40 Switch 41 Switch 42 Switch 43 Switch 44 Switch 45 Switch 46 Switch 47 Switch 48
J1
SWITCH O

RIGHT
BUMPER
D D
O

NOT
USED
D
O

(M) AP
D
O

M (A) P
D
O

MA (P) RT ORBIT ARK ENTER

D
O

(TOP) (OPTO)
D
O

HIT ARK
D
O

(OPTO)
GERMAN
D
O

1 (BOT)
GERMAN
D
O

2
D
O

GERMAN
3
D
O

GERMAN
4 (TOP)
D
O

MAP
EJECT
D
O

LT SLING
(TOP)
D
O

RT SLING
(TOP)
D
O

RT RAMP
ENTRANCE
Drive 3

STROBES T T T T T T T T T T T T T T T T
S S S S S S S S S S S S S S S S
J1q GRN-BRN
Q1 1
Playfield Switch Wiring Diagram

[ 2 KEY ]
Switch 49 Switch 50 Switch 51 Switch 52 Switch 53 Switch 54 Switch 55 Switch 56 Switch 57 Switch 58 Switch 59 Switch 60 Switch 61 Switch 62 Switch 63 Switch 64
GRN-RED SKILL ARK ARK TEMPLE TEMPLE RT ORBIT GERMAN GERMAN GERMAN LT ORBIT TEMPLE RT RAMP CAPTIVE CAPTIVE SWORDS- SWORDS-
Q2 3 SHOT MTR (UP) MTR (DN) MTR (UP) MTR (DN) (BOTTOM) 5 (BOT) 6 7 (TOP) (TOP) STANDUP EXIT BALL (TOP) BALL (BOT) MAN BACK MAN FRWD
D D D D D D D D D D D D D D D D
O O O O O O O O O O O O O O O O
GRN-ORG
Drive 4
T T T T T T T T T T T T T T T T
Q3 4 S S S S S S S S S S S S S S S S

Section 5, Chapter 2
GRN-YEL
Q4 5
GRN-BLK
Q5 6
GRN-BLU
Q6 7
GRN-VIO D D iode
Q7 8 For Switch: O On

Page 94
11 & 12 T T erminal
S S trip
GRN-GRY
Q8 9 -or-
NOTE : All Switch, Lamp & Coil assemblies require diodes. D D iode
Switch Drive Transistor Some diodes are located under the playfield on Terminal O On
D D iode
Source Number : 2N3904 Strips or Diode Boards and not on the assemblies. B B oard
Sec. 5: Playfield ...
 Please NOTe: Switch & Lamp Descriptions may differ slightly than that of the Dot Display due to space restraints.
Lamp Drive IC Source Number : VN02N

U17
U16
U15
U14
U13
U12
U11
U10

9
8
7
6
5
4
3
1

10

Wiring
I/O POWER DRIVER PCB

[ 2 KEY ]

Playfield
N/C
q Lamp Drives q J13
YEL-VIO

YEL-BLK
YEL-BLU

YEL-RED
J13q YEL-GRY

YEL-BRN
YEL-GRN

YEL-ORG
LAMP COLUMNS 18VDC

Drive 1 Drive 2 Drive 3 Drive 4 Drive 5 Drive 6 Drive 7 Drive 8

Lamp 01 Lamp 02 TOURNA- Lamp 03 Lamp 04 Lamp 05 Lamp 06 Lamp 07 Lamp 08
START MENT START NOT NOT NOT NOT LAST CRUSADE
Playfield Lamp Wiring Diagram

BUTTON
D D USED
D USED
D USED
D USED
D CRUSADE
D ARROW
D
O O O O O O O O
T T T T T T T T

Return 1
t S S S S S S S S

Lamp Lamp 09 Lamp 10 Lamp 11 Lamp 12 Lamp 13 Lamp 14 Lamp 15 Lamp 16

RAIDERS RAIDERS RAIDERS LITE RIGHT RAIDERS SHOOT RAIDERS
Returns #5
D (TOP) #4
D #3
D MYSTERY
D SPECIAL
D #2
D AGAIN
D #1
D (BOT)
O O O O O O O O
t T T T T T T T T

Return 2
S S S S S S S S
Lamp 17 Lamp 18 Lamp 19 Lamp 20 Lamp 21 SKILL: Lamp 22 SKILL: Lamp 23 SKILL: Lamp 24 SKILL:
NOT NOT IN (D) Y I (N) DY INDY JONES CAIRO SWORDS- MYSTERY SUPER POPS
J12 USED
D USED
D D D D MAN
D D D
LAMP RETURNS O O O O O O O O
T T T T T T T T

Return 3
S S S S S S S S
J12q RED-BRN
Lamp 25 SKILL: Lamp 26 RIGHT Lamp 27 Lamp 28 Lamp 29 Lamp 30 Lamp 31 Lamp 32
Q33 1 ADVANCE SCENE ORBIT ARROW (I) NDY (J) ONES J (O) NES JO (N) ES JON (E) S JONE (S)
D D D D D D D D
RED-BLK O O O O O O O O
2 T T T T T T T T

Return 4
Q34 S S S S S S S S
RED-ORG Lamp 33 Lamp 34 RIGHT Lamp 35 Lamp 36 Lamp 37 Lamp 38 Lamp 39 Lamp 40
Q35 3 EXTRA RAMP ARROW TEMPLE TEMPLE TEMPLE TEMPLE TEMPLE NOT
BALL
D D #5
D (TOP) #4
D #3
D #2
D #1
D (BOT) USED
D
RED-YEL O O O O O O O O
4 T T T T T T T T

Return 5
Q36 S S S S S S S S
RED-GRN Lamp 41 Lamp 42 Lamp 43 Lamp 44 Lamp 45 Lamp 46 X2 Lamp 47 Lamp 48 CAIRO
Q37 5 (M) AP M (A) P MA (P) NOT KINGDOM MARKS 8-BALL SWORDSMAN
D D D USED
D D THE
D SPOT D D
RED-BLU O O O O O O O O
6 T T T T T T T T

Return 6
Q38 S S S S S S S S
[ 7 KEY ]
RED-VIO Lamp 49 Lamp 50 Lamp 51 Lamp 52 Lamp 53 Lamp 54 RIGHT Lamp 55 LEFT Lamp 56 LEFT
Q39 8 CRUSADE CRUSADE CRUSADE CRUSADE CRUSADE SPINNER SPINNER ORBIT ARROW
#5
D (TOP) #4
D #3
D #2
D #1
D (BOT) D D D
RED-GRY O O O O O O O O
9 T T T T T T T T

Return 7
Q40 S S S S S S S S
RED-WHT Lamp 57 Lamp 58 Lamp 59 Lamp 60 LEFT Lamp 61 TOP Lamp 62 BOTTOM Lamp 63 RIGHT Lamp 64
Q41 10 NOT NOT NOT BUMPER BUMPER BUMPER BUMPER TEMPLE
USED
D USED
D USED
D D D D D ARROW
D

Lamp Return Transistor Source Number : STP20N10L

RED O O O O O O O O
11 T T T T T T T T

Return 8
Q42 S S S S S S S S
N/C Lamp 65 Lamp 66 Lamp 67 Lamp 68 Lamp 69 Lamp 70 Lamp 71 Lamp 72
12 TEMPLE OF KINGDOM KINGDOM KINGDOM KINGDOM LEFT RAIDERS KINGDOM
DOOM
D #5
D (TOP) #4
D #3
D #D2 SPECIAL
D ARROW
D #1
D
O O O O O O O O
T T T T T T T T
D D iode S S S S S S S S
For Lamp(s): O On
60–63 & 80 T T erminal Lamp 73 Lamp 74 Lamp 75 Lamp 76 Lamp 77 Lamp 78 Lamp 79 Lamp 80
S S trip MYSTERY NOT NOT NOT IND (Y) NOT RAIDERS GRAIL
-or- D USED
D USED
D USED
D D USED
D D D
NOTE : All Switch, Lamp & Coil assemblies require diodes. D D iode O O O O O O O O
O On T T T T T T T T
Return 9 Return 10

Some diodes are located under the playfield on Terminal D D iode S S S S S S S S

Strips or Diode Boards and not on the assemblies. B B oard

Page 95
Section 5, Chapter 2
Sec. 5: Playfield ...
 Playfield Terminal Strips, Fuses & Misc. Wiring Descriptions & Locations
Please Note: Terminal Strip(s), Diode Board(s) and/or Fuse Holder(s) locations shown,
represent the general location (your game may differ slightly). Bottom of Playfield Explanation:
shown as if leaning All Switches, Lamps & Coils require diodes. Coil diodes are
up against the
All fuses are rated: Backbox. located on the I/O Power Driver PCB (in Backbox). Some diodes
3A 250v Slo-Blo from switches or lamps are moved onto Terminal Strips (located
Do Not Over-Fuse under the playfield). This is done where space constraints or
excessive vibrations are present. The Switch & Lamp Matrix Grids
also note which Switch or Lamp has a diode on a Terminal
Strip, noted by DOTS (Diode On Terminal Strip).

Note: Some wires 'appear' to be doubled on the lugs.

The switches and lamps are in a series, so you may see 1
or 2 wires depending where the switch or lamp is in the
820-6221-LR
820-6221-LL

LOWER LEFT FLIPPER FUSE LOWER RIGHT FLIPPER FUSE

Rated 3A 250V S.B. Rated 3A 250V S.B. string.
RED 3A S.B. GRAY RED 3A S.B. BLUE
–YEL –YEL –YEL –YEL READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
INDIANA
820-6221-A4A
LAMP 60 RED-GRY
JONES PINBALL
LEFT
BUMPER 1N4004
1N4004
BLACK
J12-9
RED-
GRY
TERMINAL STRIP
J13-6

I/O PCB
BLK YEL-BLK YEL-

YEL -GRN
BLK

BLK
BLK

E READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!

SWITCH 12
820-6221-A4F
INDIANA
JONES PINBALL
BLACK
TOP
BUMPER LAMP 61
J13-5
YEL-
GRN
ORANGE ORANGE
1N4004
TAN-YEL BLACK
CPU PCB

J12-6
CONN.

TRANSFER
TROUGH
TERMINAL STRIP
J1-1
GRN-BRN GRN-BRN GRN-BRN
READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
INDIANA
820-6221-A4E
SWITCH 11 JONES PINBALL

1N4004
ORANGE ORANGE TAN-ORG
CPU PCB

J12-7
CONN.

GRAIL

F
EJECT
TERMINAL STRIP
J1-1
GRN-BRN GRN-BRN GRN-BRN

D
READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
INDIANA
820-6221-A4D

BLACK
LAMP 80
ORG-RED
1N4004
JONES PINBALL

RED
READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
J12-11
I/O PCB
CONN.

INDIANA
GRAIL
(CUP)

820-6221-A4C
TERMINAL STRIP
J13-1
BLACK YEL-GRY YEL-GRY

LAMP 63 JONES PINBALL

READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
INDIANA
820-6221-A4C
LAMP 62 JONES PINBALL

1N4004
BLACK RED-GRY
J12-9
I/O PCB

BOTTOM
BUMPER
TERMINAL STRIP
J13-4
BLACK YEL-BLU YEL-BLU

qqqqq
1N4004
UNDER
BLACK RED-GRY
STERN® PINBALL, INC. 820-6221-A4MAP

PLAYFIELD
FUSES
J12-9

I/O PCB
RATED:
3A 250V
SLO-BLO
E DO NOT

DF
OVER FUSE!
ppppp
RIGHT
C B BUMPER
TERMINAL STRIP
J13-3
DTS Decal Map
A
BLACK YEL-VIO YEL-VIO

C B
DTS / Fuse Decals
SPI : 820-6221-A4A-E/M +
820-6221-LL, -LR & -UP

READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
INDIANA
820-6221-A4B
LAMP 62 JONES PINBALL
READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
INDIANA
820-6221-A4B
LAMP 63 JONES PINBALL

1N4004
BLACK RED-GRY
J12-9
I/O PCB

RIGHT
BUMPER
TERMINAL STRIP
J13-3
BLACK YEL-VIO YEL-VIO
READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!

LAMP 60 820-6221-A4A
INDIANA
JONES PINBALL 1N4004
LEFT
BUMPER 1N4004
RED-GRY
1N4004
BLACK RED-GRY
BLACK
J12-9
J12-9

I/O PCB
RED-
GRY
TERMINAL STRIP
J13-6
I/O PCB

BLK YEL-BLK YEL-

BLK

BLK
YEL -GRN

BLACK
TOP
BUMPER LAMP 61
BLK
J13-5
YEL-
GRN
BOTTOM
BLACK
BUMPER
TERMINAL STRIP
J13-4
BLACK YEL-BLU YEL-BLU

J3 J4
J2

J1

A
J5
Sec. 5: Playfield ...

Continued Next Page.

See Sec. 4, Chp. 1 (Pink Pages), CATHODE

SIDE 1N4004 ANODE
SIDE
Playfield Bottom – Misc. Parts and 112-5003-00
Brackets for Terminal Strips, Diodes,
TERMINAL STRIP
Fuses and Fuse Holders Part #s.

Section 5, Chapter 2 Playfield

Page 96 Wiring
Playfield Terminal Strips, Fuses & Misc. Wiring Descriptions & Locations Continued

Continued Previous Page.

E
D F
C B

READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
INDIANA
820-6221-A4D
LAMP 80 JONES PINBALL

1N4004
BLACK ORG-RED RED
J12-11
I/O PCB
CONN.

GRAIL
(CUP)
TERMINAL STRIP
J13-1
BLACK YEL-GRY YEL-GRY

READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS!
INDIANA
820-6221-A4E
SWITCH 11 JONES PINBALL

1N4004
(TAN)-ORG ORANGE TAN-ORG
CPU PCB

J12-P7
CONN.

GRAIL
EJECT
TERMINAL STRIP
J1-1
GRN-BRN GRN-BRN GRN-BRN

(WIRE COLOR NOTE: ORG-YEL MAY APPEAR ORG-TAN)

READ GAME MANUAL FOR MORE INFO! LOOK FOR INFO OR WARNING DECALS! Sec. 5: Playfield ...
INDIANA
820-6221-A4F
SWITCH 12 JONES PINBALL

1N4004
ORG-(YEL) ORG-(YEL) TAN-YEL
CPU PCB

J12-6
CONN.

TRANSFER
TROUGH
TERMINAL STRIP
J1-1
GRN-BRN GRN-BRN GRN-BRN

See Sec. 4, Chp. 1 (Pink Pages), CATHODE

SIDE 1N4004 ANODE
SIDE
Playfield Bottom – Misc. Parts and 112-5003-00
Brackets for Terminal Strips, Diodes,
TERMINAL STRIP
Fuses and Fuse Holders Part #s.

Playfield Section 5, Chapter 2

Wiring Page 97
 2-Flipper Circuit Wiring Diagram
The Outside LEFT FLIPPER BUTTON located
Partial View CPU/Sound CPU/Sound PCB on the Cabinet operates both the Left Flipper &
PCB (520-5246-00)

Ground
Upper Left Flipper, if used. The Outside RIGHT

IC-U4

IC-U4

IC-U4

IC-U4

IC-U4

IC-U4

IC-U4

IC-U4
Dedicated Switch IC FLIPPER BUTTON located on the Cabinet
Source Number : LVC245A operates both the Right Flipper & Upper Right
Flipper, if used. RIGHT & LEFT BUTTONS:
J3

[ 3 KEY ]
These switches are Double-stacked. Pressing

J3q
1 2 4 5 6 7 8 9 10
DEDICATED SWITCHES
half-way down operates the Lower Flippers
(respectively); pressing full down operates both

GRY-BRN

GRY-RED

GRY-ORG

GRY-YEL

GRY-GRN

GRY-BLU

GRY-VIO

GRY-BLK

BLACK
the Lower Flipper & Upper Flippers
(respectively) simultaneously.

LEFT RIGHT UPPER LEFT UPPER RIGHT

FLIPPER FLIPPER FLIPPER FLIPPER
BUTTON BUTTON BUTTON BUTTON
N.O. tSW. D-90 N.O. tSW. D-11 N.O. tSW. D-13 N.O. tSW. D-15
ON CABINET ON CABINET ON CABINET ON CABINET
INSIDE LEFT INSIDE RIGHT INSIDE UPR. LEFT INSIDE UPR. RIGHT
DOUBLE-STACK DOUBLE-STACK DOUBLE-STACK DOUBLE-STACK
DEDICATED DEDICATED DEDICATED DEDICATED
GND SWITCH GND SWITCH GND SWITCH GND SWITCH
(Black) (Black) (Black) (Black)

LEFT RIGHT UPPER LEFT UPPER RIGHT

NOTE: FLIPPER FLIPPER FLIPPER FLIPPER
N.C. = Normally Closed E.O.S. E.O.S. E.O.S. E.O.S.
N.O. = Normally Open
E.O.S. = End-of-Stroke N.C. tSW. D-10 N.C. tSW. D-12 N.C. tSW. D-14 N.C. tSW. D-16
ON LEFT FLIPPER ON RIGHT FLIPPER ON LEFT FLIPPER ON RIGHT FLIPPER
ASSEMBLY ASSEMBLY ASSEMBLY ASSEMBLY
DEDICATED DEDICATED DEDICATED DEDICATED
Technical GND
SWITCH
GND
SWITCH
GND
SWITCH
GND
SWITCH

Overview (Black) (Black) (Black) (Black)

Our Flipper System uses one supply voltage (+50VDC) for both kick & hold. Once the Game CPU detects a Flipper
Cabinet Switch closure (during game play) it applies a 40msec pulse to the gate of the Flipper Drive Transistor
(STP22NE10L). If it continues to detect a Flipper Cabinet Switch closure (the player holding the button in) it will continue
to pulse the flipper drive transistor 1msec every 12msecs for the duration of the hold cycle.
The E.O.S. (End-Of-Stroke) Switch serves the same function as before as it prevents
J10
VOLTAGE OUTPUTS
foldback when the player has the flipper energized to capture balls. The E.O.S.
Dedicated Switch is a normally closed switch which opens approximately 1/16" when
the flipper is energized. The Game CPU will detect a switch closure if the flipper bat is
J10q forced back by a high velocity shot or
10
rebound on the playfield and will apply
Partial View I/O I/O POWER DRIVER PCB another 40msec pulse of 50VDC to the
9 Power Driver PCB
(520-5249-00) J9q coil.
8 1
MOS FET
IC Source Number : 2
7 STP22NE10L [ 3 KEY ]
+50VDC
HIGH CURRENT SOLENOIDS

4
#13 Upper PF Left 3A
+50VDC
RED-YEL
6
Flippers
Q13 5
BLU-GRN 00-0000 Flipper GRY-YEL SLO-BLO
6
J9

HIGH
POWER 5 +50VDC
#14 Upper PF Right 3A
4
Q14 BLU-BLK 00-0000 Flipper BLU-YEL SLO-BLO
7
Sec. 5: Playfield ...

[ 3 KEY ] +50VDC
BLACK #15 (Lower) 3A
2 GROUND Q15 ORG-GRY 22-1080 Left Flipper GRY-YEL SLO-BLO
8
1 +50VDC
#16 (Lower) Right 3A
Q16 ORG-VIO 22-1080 Flipper BLU-YEL SLO-BLO
9
Q13-Q16: These Coil Fuses are located
under the playfield NEAR the assembly,
see Section 5, Chapter 2, Playfield Wiring.
NOTe:
Coil Diodes (1N4004)
are integrated on the I/O
Power Driver PC Board.
RED-YEL 50VDC RED-YEL 50VDC

Section 5, Chapter 2 Playfield

Page 98 Wiring
 Section 5 Chapter 3 of 4
Cabinet and Coin Door Wiring
Transformer Power Wiring Diagram 1T1 1F/M2 I/O J17
1F/M1 1M/F1
GRY 19VAC
BLACK 3 2 F12 5A S.B.
1 1
BLACK GRY-WHT
2 2
5 5 TO BRIDGE 3
BROWN*
6 6
JUMPER

FOR AUDIO
ORANGE GRY-GRN 19VAC F13 5A S.B.
9 9 4 3
WHT-BLK BLU-WHT 13VAC
JUMPER

3 3 9 8
JUMPER

WHT-BRN F9 8A S.B.
5 5 TO BRIDGE 4

TO I/O POWER DRIVER BOARD

WHT-BRN BLU-WHT 13VAC
4 4 10 9 FOR +18VDC
WHT-ORG CONTROL LAMPS
8 8 WHT-RED 16VAC
WHT-ORG 7 6 F10 5A S.B.
7 7
BLACK TO BRIDGE 2
ER

10 * YEL-WHT WHT-RED 16VAC FOR +20VDC

MP

WHITE may be substituted in harness 6 7 COILS / FLASHERS

JU 11 (Pin-6)
RED 8VAC
JUMPERS 12 NOT USED DOMESTIC 13 1 F11 4A S.B.
14AWG BLACK CONFIGURATION
TO BRIDGE 5
RED 8VAC FOR +5VDC
ON/OFF 14 4 LOGIC POWER
LINE BLK
I/O J11
FILTER I/0 BLK BLK-YEL 48VAC
120V / 240V 1 11 3 F6 3A S.B.
50 Hz / 60 Hz WHT 115VAC WHT 2
RF1 YEL-BLK 24VAC
TO 15 1 TO BRIDGE 1
DOLLAR BILL$ 24VAC FOR +50VDC
VALIDATOR BLK-ORG 48VAC F5 7A S.B. COILS / FLIPPERS
GRN 12 2

GROUND DPS CN1

WHT-GRN 88VAC
2 1

Domestic = WHT TO DISPLAY POWER

1 3 SUPPLY PC BOARD
WHT 115VAC
1V1
VARISTER International = BLK-RED 100VAC F1 3/4A S.B.
8 2
Dom. = 130V BLU 220VAC
Int'l = 275V
1F/M3 I/O J14

TO I/O POWER DRIVER BOARD

1 1 F1, F2, F3, F4 5A S.B. (all)
GRN (to (E)arth Ground) 3 3
YEL
1F1 FUSE SERVICE OUTLET 2 2
Domestic = FOR GENERAL
8A 250V (Domestic / International) 5.7VAC ILLUMINATION
Slo-Blo Note: Not All International Games YEL-WHT (G.I.s) +5.7VAC
have or require a Service Outlet. 4 4
Fuse
Int’l = 5 5
5A 250V
Slo-Blo Domestic = BLK 115VAC 6 6 +5.7VAC
Fuse International = BRN 220VAC
ALL FUSES RATED 250V SLO-BLO DO NOT OVERFUSE p
HOT (L)oad (N)eutral
1F/M4
BLU WHT
JUMPER PLUG q 120VAC
(SPI PART #036-5530-120)
110+VAC LINE BLU BLK
CORD
N. AMERICA Sec. 5: Cab. & Coin
LINE VOLTAGE BALLAST
CU45Z-W 1/2" Core

120V 50/60Hz 13W (UL) STARTER

SPI Nr.: 010-5015-00 FLUOR. FS2 LIGHT
SPI Nr.: 165-5011-01
BLK-WHT BLK
For all the Cabinet
Universal Voltage
FLUORESCENT TUBE 24"
Jumper Plug RED (F20T9CW) WHT
115 SPI Nr.: 165-5061-00
Configurations for VOLTS
voltage variations,
see the end of this FLUORESCENT TUBE, STARTER & BALLAST
Chapter, Page 102. LOCATED IN THE BACKBOX

Cabinet and Coin Section 5, Chapter 3

Door Wiring Page 99
 Cabinet Wiring Diagram
J3q BLACK N.O.
Ground 10 tSW. D-15
UPR. RIGHT FLIPPER BUTTON
GRY-BLK N.O.
Dedicated Switch IC Source Number : LVC245A IC-U4 9 tSW. D-11
RIGHT FLIPPER BUTTON
GRY-VIO

PWR. XFRMR / AC VOLTAGES

IC-U4 8 N.C. NORMALLY OPEN -1 J17q
DEDICATED SWITCHES

tSW. D-16

J17+J11
GRY-BLU 16VAC RED-WHT 7
IC-U4 7 UPPER RIGHT FLIPPER E.O.S.
N.C. 20VDC COMMON - 1
J3

GRY-GRN tSW. D-12 COILS N.O. 16VAC WHT-RED

IC-U4 6 N.C.
RIGHT FLIPPER E.O.S. TRANSFORMER
GRY-YEL tSW. D-14 NORMALLY OPEN -2 J11q
IC-U4 5 N.C.
UPPER LEFT FLIPPER E.O.S. 48VAC BLK-YEL 3
GRY-ORG tSW. D-10 50VDC COMMON - 2
LEFT FLIPPER E.O.S. COILS 48VAC BLK-YEL
IC-U4 4
[ 3 KEY ]
BLACK TRANSFORMER
GRY-RED N.O.
IC-U4 2 tSW. D-13
UPPER LEFT FLIPPER BUTTON COIL POWER INTERLOCK SWITCH
GRY-BRN N.O. (location : inside Coin Door)
IC-U4 1 tSW. 0D-9
Upper Left or Right LEFT FLIPPER BUTTON
Double-Stack Dedicated
Switch(es), if equiped. GND RED-WHT
(location : cabinet inside, (Black)
below flipper button(s))

SHAKER MOTOR PCB J1q

520-5065-00

1N5404
1

D3

tI/O POWER DRIVER PCBu

HIGH CURRENT SOLENOIDS
2

250V SLO-BLO
J2q [ 3 KEY ]
10W 10W
BLUE

20J1ROE
OHMITE
RED

qF3
+12VDC

2.5A
5 R1 4
tCPU/Sound PCBu

J8
[ 4 KEY ] J8q
BLU 3 5 [ Q8 ] BRN-GRY
9
OPTIONAL
250V SLO-BLO
2.5A SPARE

RED BRN-GRY
6
1N5404

Q6 SHAKER MOTOR 2
qF2
D2

order 502-5027-00 SM Kit

See Page 88 for Kit Details.
1 7
(loc. : under Left Flip. Button)
DEDICATED SWITCHES

J13q BLACK TICKET NOTCH p INSIDE CABINET LEFT SIDE WHEN INSTALLED p
J13

(IF USED)
Ground 10
qSW. D-19
N.O.

POWER OUT / LOW CUR.

LT. GRN-ORG
LVC245A

IC-U41 4 J16q

J16+J7
GND OPTIONAL
N.O. (Black) +5VDC RED 4
LT. GRN-BRN –
IC-U41 1 8
pSW. D-17 J7q
TILT PENDULUM
(PLUMB BOB) VIO-GRY
GND 10
(Black)
J10q YEL-WHT Q24 OPTIONAL COIL
(OUT A–) 4 ~ e.g. Coin or Tix Meter ~
(location : Coin Door)
J10

YEL-BLK
OUT A [+] 3
AUDIO

RED-WHT
(OUT B –) 2
(loc. : under Right Flip. Button)
RED-BLK CABINET POWER SOURCE CONNECTOR
OUT B [+] 1 BOTTOM J16
SPEAKER J16q
POWER OUT

+5VDC RED 4
(GND) BLK –
8
BACKBOX BACKBOX +12VDC GRY-RED
LEFT RIGHT 3
SPEAKER SPEAKER
Sec. 5: Cab. & Coin

TOURNAMENT
BUTTON
qSW. 15
SWITCH DRIVES / SW. RETURNS

LAMP COL. 18V / LAMP ROWS

J12q N.O. J13q

TAN-VIO YEL-RED
J13+J12

2 8
J12+J1

N.O.
TAN-WHT YEL-BRN 9
1
pSW. 16 3-LUG DIODE
TERMINAL STRIP
START BUTTON ORG-BRN
J1q J12q
GRN-BRN pLAMP 2 RED-BRN
1 TOURNAMENT BUTTON 1
ORG-BRN
pLAMP 1
START BUTTON
pCPU/Sound PCBp pI/O POWER DRIVER PCBp
Section 5, Chapter 3 Cabinet and Coin
Page 100 Door Wiring
 Coin Door Wiring Diagram
SW. 0D-2 PNK-RED

US TYPICAL 25¢ 2-SLOT COIN DOOR +5V 9-PIN

USES CABLE WIRING HARNESS MOLEX
RED BLOCK
036-5509-25 BLACK CONN.

(location : Coin Door) ALT. BILL ACCEPTOR

(location : Cabinet)
COIN SLOT SWITCHES & G.I.s
PNK-RED BLACK 9-PIN
SW. 0D-2u MOLEX
TO CENTER COIN SLOT
BLOCK
TO POWER BOX IN CABINET
J2q BLACK / DOLLAR BILL ACCEPTOR
or VALIDATOR (OPTIONAL) BLK-WHT CONN. WHITE
Ground 11 1 +110VAC NUETRAL
WHT-BLK BLACK
PNK-GRN 2 +110VAC ( HOT )
D.S. IC Source Nr. : LVC245A

IC-U2 7 PNK-GRN
tSW. 0D-5
DEDICATED SWITCHES

PNK-YEL 5TH COIN SLOT

IC-U2 6 PNK-YEL

(location : Coin Door)

tSW. 0D-4
J2

#555 G.I. BULBS

[ 5 KEY ]
PNK-ORG 4TH COIN SLOT
IC-U2 4 12-PIN PNK-ORG
MOLEX tSW. 0D-3
PNK-RED BLOCK RIGHT COIN SLOT
IC-U2 3 CONN. PNK-BRN
tSW. 0D-1

BLACK

POWER OUT / GEN. ILLUM.

PNK-BRN LEFT COIN SLOT

J16+J15
IC-U2 2 1 4 7 10 1 4 7 10
BLACK 2 5 8 2 5 8 J15q
Ground 1 WHT-GRN 7
J13q BLACK 3 6 9 12 3 6 9 12 YEL-WHT
1
Ground YELLOW GREEN

tI/O POWER DRIVER PCBu

10 2 6
N/C
3
LT. GRN-GRY BLACK +12VDC J16q
DEDICATED SWITCHES
D.S. IC Source Nr. : LVC245A

IC-U41 9 4

4-BUTTONS FOR SERVICE MENU

GRY-RED
J13

BLACK 3
tCPU/Sound PCBu

LT. GRN-VIO
IC-U41 8 LT. GRN-GRY
tSW. D-24
LT. GRN-BLU (location : Coin Door) SELECT BUTTON ( BLACK ) Note: If a +20VDC
BROWN ( I/O J7-P1 ),
IC-U41 7 LT. GRN-VIO
tSW. D-23 is connected to Pin-3
of the Coin Door 4-Pin
LT. GRN-BLK + / > BUTTON ( RED ) Flat Connector and a
IC-U41 6 LT. GRN-BLU C120 is required, see
tSW. D-22 the Electronic Coin Mech.
LT. GRN-BRN < / – BUTTON ( RED ) PCB Wiring below.
IC-U41 1 LT. GRN-BLK
tSW. D-21

BLACK
BACK BUTTON ( GREEN )

LT. GRN-RED
BLACK
tSW. D-18
SLAM TILT (OPTIONAL)

1-SLOT COIN DOOR WITH C120 CAPABILITIES (NO INTERFACE COIN MECH PCB REQUIRED)
USES CABLE WIRING HARNESS
036-5509-31A (+12VDC GRY-RED)
036-5509-31B (ICT/KAL ONLY) / 036-5509-31C (ODA ONLY) / 036-5509-31D (SPAIN ONLY)
NON-US NON-C120 2-SLOT COIN DOOR NON-US NON-C120 3-SLOT COIN DOOR
USES CABLE WIRING HARNESS USES CABLE WIRING HARNESS
036-5509-32 036-5509-33

IF YOUR GAME HAS AN ELECTRONIC COIN MECH. INTERFACE PC BOARD ( 520-5193-00 ): #555 G.I. BULB

LOW CURRENT / GEN. ILLUM.

(location : Coin Door)
1-SLOT COIN DOOR USE WITH C120 CAPABILITIES REQUIRING PCB 520-5193-00
USES CABLE WIRING HARNESS J15q

J7+J15
WHT-GRN 7
036-5509-31 (S.A.M. SYSTEM) YEL-WHT
1
CN1
YELLOW
2 GREEN 6
BROWN +20VDC
ELECTROIC COIN MECHANISM

+20VDC BROWN
+20VDC 1 BLK BLACK
3
+20VDC J7q
GND 2 4
KEY 3 BROWN 1
to 12-PIN MOLEX BLOCK CONNECTOR BLACK
INTERFACE PCB

SW DRV 1 4 1 4 7 10 Sec. 5: Cab. & Coin

520-5193-00

PNK-BRN (P-3) SW. D-1 CPU J2-P2 LEFT COIN SLOT IF YOUR GAME HAS A
SW. D-1 5 PNK-RED (P-2) SW. D-2 CPU J2-P3 CENTER COIN SLOT 2 5 8
SW. D-2 6 PNK-ORG (P-1) SW. D-3 CPU J2-P4 RIGHT COIN SLOT +20VDC BROWN WIRE TO
SW. D-3 7 2 6 9 12 THE 4-PIN CONNECTOR, THE
CABLE WIRING HARNESS IS
036-5509-31. PLEASE NOTE: IF THE WIRE IS NOT
1 2 3 4 5 6 7 8 9 10 to COIN MECH BROWN BUT +12VDC GRY-RED INSTEAD, USE CABLE
Red Stripe 1 2 WIRING HARNESS 036-5509-31A, AND DO NOT USE THE
+12VDC

ELECTRONIC COIN MECH INTERFACE PCB 520-5193-00.

RED

Switch

RIBBON CABLE, Pins 1-10 corresponds

GND
Ded.

9 10
CN2
to the Coin Mech. Conn. Pins 1-10
CN3
5 4 3 2 1
NOT SHOWN ARE THE WIRES FOR
PINS 4, 6, 7, 8, 9 & 10 (SERVICE BUTTONS
& OPTIONAL SLAM TILT); THEY ARE
PNK-GRN (P-5) SW. D-5 CPU J2-P7 5TH COIN SLOT IDENTICAL TO ABOVE 12-PIN MOLEX
BLOCK CONNECTOR
PNK-YEL (P-6) SW. D-4 CPU J2-P6 4TH COIN SLOT
~ WIRING CONFIGURATION WILL VARY ACCORDING TO COUNTRY ~

Cabinet and Coin Section 5, Chapter 3

Door Wiring Page 101
 Future Expansion
Cabinet Universal Voltage Jumper Plugs (for use with Universal AC Cable, 036-5530-00 ONLY)

JUMPER PLUG q
(SPI PART #036-5530-120)
110+VAC
N. AMERICA
LINE VOLTAGE

1
2 4
3 5 7 115
6 8 10 VOLTS
9 11
12

12-PIN FEMALE SIDE TO JUMPER 9-PIN MALE SIDE TO TRANSFORMER

12-PIN MALE SIDE CONNECTOR 9-PIN FEMALE SIDE CONN.

4
1 BLK 1
1
7 2 BLK 4
10 3 WHT-BLK 7
4 WHT-BRN
1 4 5 WHT-BRN
2 3 2 1
7 6 BRN (or YEL-WHT)
10 5
3 6 4
6
7 WHT-ORG 7
8 WHT-ORG 9
8
12-PIN F/M CONN. 9-PIN F/M CONN.
BACK VIEW p 9 ORG p BACK VIEW
10 BLK
11 WHT
12 N/U

t JUMPER PLUG
(SPI PART #036-5530-100)
98VAC – 109VAC 10
JAPAN or 11
100
VOLTS N. AMERICA LOW Black & White wires from
the POWER BOX, cabinet bottom
LINE VOLTAGE to 12-Pin Conn., Pins 10 & 11..

JUMPER PLUG q JUMPER PLUG q JUMPER PLUG q

(SPI PART #036-5530-206) (SPI PART #036-5530-220) (SPI PART #036-5530-230)
200VAC – 211VAC 212VAC – 224VAC 225+VAC
EUROPE and EUROPE and EUROPE and
Sec. 5: Cab. & Coin

MID. EAST LOW MID. EAST MID. EAST HIGH

LINE VOLTAGE LINE VOLTAGE LINE VOLTAGE

206 218 230

VOLTS VOLTS VOLTS

Section 5, Chapter 3 Cabinet and Coin

Page 102 Door Wiring
Section 5 Chapter 4 of 4
Printed Circuit Boards (PCBs)
Trough Up-Kicker Dual OPTO PCBs (515-0173-00 & 515-0174-00) Theory of Op. & Schematic
As light from the Transmitter LED1 falls on the Receiver LED1, it generates a Positive Bias Voltage (0.7v to 1.5v)
which is applied to the Gate (G) of Q1 (Fet 2N5460) turning Q1 off. When Q1 is held off, no current flows through
Q2's (2N3906) Base (B). With no base current, Q2 is off and acts as an OPEN SWITCH. When the light is
interrupted (BLOCKED) R1 (Rec. Bd.) bleeds the gate voltage off of Q1 allowing it to conduct, switching Q2 on,
which acts as a CLOSED SWITCH. The LED2 (Trans/Rec) Circuit operates identical as the LED1 Circuit.
+5v CN1 B Te s t
Point
CN1

2 1 WHT/XXX
RED (Switch Row/
R2 Return +)
LED 1 R1 4.7K W E
R1 TLRH180P 10M W B
180 W Q2
G D 2N3906
S C
R3 Q1
LED 1 10K W 2N5460
TLRH180P
A Te s t
Point
G=Gate D=Drain S=Source
B Te s t
Point
B=Base E=Emitter C=Collector

R2 3 WHT/XXX
180 W (Switch Row/
R5 Return +)
LED 2 R4 4.7K W E
TLRH180P 10M W B Q4
LED 2 G D 2N3906
TLRH180P

S C
BLK R6 Q3
1 10K W 2N5460 2 GRN/XXX
A Te s t
Point (Switch Col/
520-5173-00 520-5174-00 Drive -)
GND Transmitter Receiver = Emitting Light

Trough Up-Kicker Dual OPTO PCBs (515-0173-00 & 515-0174-00) Component Layout & Parts
520-5173-00 (TRANS) Boards Actual Size 520-5174-00 (REC)
(Screened Text Printed Larger for Clarity)
LED2 LED2
00-3715-025 520-5173-00 520-5174-00 00-4715-025
REC CER
SNART TRANS
R4
R6
103

105
R5
1B1
562 R2

Q3
R2 562
Q1

Q4
MGE3
MGE3

1B1
2A 7

Q2
R1
2A 7

105
R3
103

R1

LED1 LED1
CN1
CN1

Front Side Back Side Back Side Front Side

(LEDs & 2-Pin Connector) (Solder / Surface Mounts) (Solder / Surface Mounts) (LEDs & 3-Pin Connector)

ITEM QTY PART NUMBER REF-DESIGNATOR DESCRIPTION

A+C & D 1 515-0173-00 Dual-OPTO Transmitter PCB Assembly (Item A PCB + Items C & D)
A 1 520-5173-00 Dual-OPTO Transmitter PCB (includes Items A-1 – A-3)
A-1 1 045-5111-02 CN1 2X, .156" Rt. Angle (26-60-5020) Conn.
A-2 2 165-5052-00 LED1, LED2 LED TLRH180P (Ultra Bright Red)
Sec. 5: PCBs

A-3 2 121-5067-00 R1, R2 180 W Resistor SMT, 1/8W (CRCW)

B+C & D 1 515-0174-00 Dual-OPTO Receiver PCB Assembly (Item B PCB + Items C & D)
B 1 520-5174-00 Dual-OPTO Receiver PCB (includes Items B-1 – B-7)
B-1 1 045-5111-03 CN1 3X, .156" Right Angle (26-60-5030) Conn.
B-2 2 165-5052-00 LED1, LED2 LED TLRH180P (Ultra Bright Red)
B-3 2 110-5006-00 Q1, Q3 2N5460, Transistor (P-FET SOT-23)
B-4 2 110-0086-00 Q2, Q4 2N3906, Transistor
B-5 2 121-5082-00 R1, R4 Replacement Part: 10M W Resistor SMT, 1/8W (CRCW)
B-6 2 121-5083-00 R2, R5 LED TLRH180P 4.7K W Resistor SMT, 1/8W (CRCW)
B-7 2 121-5011-00 R3, R6 10K W Resistor SMT, 1/8W (CRCW)
C 3/per 530-5308-02 (T1-3/4 GaAIAs) OPTO PCB Brass Tube Spacer
D 3/per 545-5518-00 SPI Part N1: OPTO PCB Rubber Grommet
165-5052-00

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 103
 23727URXEOHVKRRWLQJ
9ROW0HWHU7HVW LQGLFDWHVQRUPDORSHUDWLQJFRQGLWLRQ 
A. OPEN OPTO (Light Falling on LED) = SWITCH OPEN. Place meter leads across points A and B on the
LED1 Circuit (Refer to Schematic Drawing on previous page, 520-5174-00 Receiver Side). It should read
approximately 0.8 - 1.2v DC. The LED2 Circuit operates the same.

B. CLOSED OPTO (Light Blocked) = SWITCH CLOSED. Place meter leads across points A and B on the
LED1 Circuit (Refer to Schematic Drawing on previous page, 520-5174-00 Receiver Side). It should read
approximately 0.0 - 0.1v DC. The LED2 Circuit operates the same.

2VF LOORVFRSH7HVW LQGLFDWHVQRUPDORSHUDWLQJFRQGLWLRQ 

A. OPEN OPTO (Light Falling on LED) = SWITCH OPEN. Place Scope lead
)LJ$ at Pin-1 of OPTO Rec. Board with Scope Grounded (see Schematic). The
Scope should display a STEADY +5v as shown in Fig. A, Wave Form
Diagram.

)LJ% B. CLOSED OPTO (Light Blocked) = SWITCH CLOSED. Place Scope lead
at Pin-1 of OPTO Rec. Board with Scope Grounded (see Schematic). The
Scope should display a PULSE STREAM indicating Q2 has switched "On"
as shown in Fig. B, Wave Form Diagram. This is your Switch Drive Pulse.

%HQFK 7HVW 6HH)LJ& 

)LJ&
Please Note: To perform this test you must use a spare
560: Pull-Up Resistor, SPI Nº: 121-5047-00

Disconnect the OPTO Transmitter / Receiver Board

from the circuit. Connect one side of a 560: Pull-Up
Resistor to Pin-1 of the OPTO Receiver Bd. and the
other side of the resistor to a 5v DC source. Connect
Pin-2 to GND. Connect a +5v DC source to Pin-1 of the
Transmitter & GND to Pin-2. Align with the Receiver
OPTO approx. 3" distance. Using your Volt-Meter or an
Oscilloscope, monitor Pin-1 while BLOCKING and
UNBLOCKING the BEAM from the Trans. The output will
be approx. +5v DC when the BEAM IS NOT BLOCKED
and approx. v when the BEAM IS BLOCKED.

7URXJK'XDO2372%RDUGV$OLJQPHQW7HVWIRU/('
When a working OPTO is installed and connected in a game, the transmitter should light (LED1 lower & LED2
upper) when the power is switched on. With the playfield in Service Position #1 (playfield lifted up in the half-way
position resting on the Prop Rod or edge slide support brackets) and the game on, the LED lights should show up
as a BRIGHT RED RINGS through the back of the Receiver Board around the Receivers LED1 & LED2 (see
Fig. 1). Testing only LED1: With the game in Switch Test Mode, lifting the Trough Plunger with a fingertip should
block the BEAM and cause the Switch Position to trigger (see Fig. 2). View Fig. 2a & 2b (on the next page) for a
sectional view of the Light Path (note alignment) and what happens as a ball breaks the light beam.

5HFHLYHU %RDUG )LJ

)LJ
Sec.
6HF3&%V

%5,*+7 5(' 5,1* 3OXQJHU EORFNV %($0

5: PCBs


/LI W
3OXQJHU SOXQJHU
WRF KH FN
9LHZIDFLQJWURXJK ZLWKSOD\ VZLWFK DV
ILHOGLQ6HU YLFH3RVLWLRQ
VKRZQ

Section 5, Chapter 4 3ULQWHG&LUFXLW

Page 104 %RDUGV 3&%V
 6HFWLRQDOYLHZIURPULJKW )LJD E

5HF 7UDQV
)LJD 6LGH )LJE 6LGH

/LJKW 3DWK

3LQEDOO
(Note
alignment)

7URXJK'XDO2372%RDUGV$OLJQPHQW7HVWIRU/('
When a working OPTO is installed and connected in a game, the transmitter should light (LED1 lower & LED2
upper) when the power is switched on. With the playfield in Service Position #1 (playfield lifted up and resting on
the Playfield Support Slide Brackets) and the game on, the LED lights should show up as a BRIGHT RED RINGS
through the back of the Receiver Board around the Receivers LED1 & LED2 (see Fig. 1, previous page). Testing
only LED2: TO PERFORM THIS TEST, A PINBALL MUST BE IN THE BALL TROUGH. With the game in Switch
Test Mode, lifting the Trough Plunger with a finger tip should block the BEAM on LED2 and cause the Switch
Position to trigger (see Fig. 3). View Fig. 3a & 3b for a sectional view of the Light Path (note alignment) and what
happens as a "double-stacked" ball scenario breaks the light beam.

)LJ )LJD )LJE

5HF 7UDQV
6LGH 6LGH
3LQEDOO

/LJKW 3DWK

3OXQJHU (Note
EORFNV alignment)
%($0


/LI W
SOXQJHU
WRF KH FN
VZLWFK DV
VKRZQ

, 0 3 2 5 7 $ 1 7
If replacement of LED is required, insure that is mounted correctly
before and after soldering (See Fig. 4a / 4b).

6HF3&%V
Sec. 5: PCBs

)LJD )LJE
&RUUHFW3RVLWLRQ ,QFRUUHFW3RVLWLRQ

3ULQWHG&LUFXLW Section 5, Chapter 4

%RDUGV 3&%V Page 105
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Schematic (Sheet 1 of 4)
Sec. 5: PCBs

Section 5, Chapter 4 Printed Circuit

Page 106 Boards (PCBs)
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Schematic (Sheet 1 of 4)

Sec. 5: PCBs

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 107
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Schematic (Sheet 2 of 4)
Sec. 5: PCBs

Section 5, Chapter 4 Printed Circuit

Page 108 Boards (PCBs)
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Schematic (Sheet 2 of 4)

Sec. 5: PCBs

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 109
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Schematic (Sheet 3 of 4)
Sec. 5: PCBs

Section 5, Chapter 4 Printed Circuit

Page 110 Boards (PCBs)
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Schematic (Sheet 3 of 4)

Sec. 5: PCBs

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 111
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Schematic (Sheet 4 of 4)
Sec. 5: PCBs

Section 5, Chapter 4 Printed Circuit

Page 112 Boards (PCBs)
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Schematic (Sheet 4 of 4)

Sec. 5: PCBs

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 113
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Component Layout
Sec. 5: PCBs

Section 5, Chapter 4 Printed Circuit

Page 114 Boards (PCBs)
 I/O POWER DRIVER PCB S.A.M. System (520-5249-00) Parts
ITEM QTY. SPI PART NUMBER (MFG. P.N.) REF-DESIGNATOR DESCRIPTION (SM = Surface Mount)
— 1 520-5249-00 I/O Power Driver PCB (S.A.M. System), Rev. A (includes Items 1-67)
1 1 121-6001-00 (101-0001807) R9 Resistor SM 0805 Film 1.5KW 1/10W 5%
2 22 121-6002-00 (101-0001820) R86, R87, R88, R89, R90, R91, R92, R93, R102, Resistor SM 0805 Film 100W 1/10W 5%
R104, R106, R108, R110, R112, R114, R116, R118,
R120, R122, R124, R126, R146
3 12 121-6020-00 (101-0001827) R21, R94, R95, R101, R103, R105, R107, R109, Resistor SM 0805 Film 10KW 1/10W 5%
R111, R113, R115, R144
4 1 121-6003-00 (101-0001845) R2 Resistor SM 0805 Film 120W 1/10W 5%
5 20 121-6022-00 (101-0001905) R7, R8, R10, R11, R12, R13, R18, R19, R98, Resistor SM 0805 Film 1KW 1/10W 5%
R100, R150, R152, R154, R156, R158, R160,
R162, R164, R166, R167
6 2 121-6004-00 (101-0001943) R6, R145 Resistor SM 0805 Film 220W 1/10W 5%
7 16 121-6005-00 (101-0001849) R55, R57, R59, R61, R63, R65, R67, R69, R71, Resistor SM 0805 Film 22KW 1/10W 5%
R73, R75, R77, R79, R81, R83, R85
8 2 121-6006-00 (101-0002012) R3, R149 Resistor SM 0805 Film 330W 1/10W 5%
9 3 121-6007-00 (101-0002031) R1, R4, R5 Resistor SM 0805 Film 390W 1/10W 5%
10 8 121-6013-00 (101-0002035) R151, R153, R155, R157, R159, R161, R163, Resistor SM 0805 Film 39KW 1/10W 5%
R165
11 9 121-6008-00 (101-0002046) R96, R97, R99, R117, R119, R121, R123, R125, Resistor SM 0805 Film 4.7KW 1/10W 5%
R148
12 8 121-6014-00 (101-0002065) R129, R131, R133, R135, R137, R139, R141, Resistor SM 0805 Film 47W 1/10W 5%
R143
13 1 121-6015-00 (101-0002071) R20 Resistor SM 0805 Film 47KW 1/10W 5%
14 8 121-6009-00 (101-0002108) R128, R130, R132, R134, R136, R138, R140, Resistor SM 0805 Film 6.8KW 1/10W 5%
R142
15 16 121-6010-00 (101-0002116) R54, R56, R58, R60, R62, R64, R66, R68, R70, Resistor SM 0805 Film 620W 1/10W 5%
R72, R74, R76, R78, R80, R82, R84
16 4 121-6016-00 (101-0002126) R14, R15, R16, R17 Resistor SM 0805 Film 680W 1/10W 5%
17 10 121-6011-00 (101-0002296) R28, R29, R30, R31, R32, R33, R34, R35, R36, Resistor SM 1206 Film 22KW 1/10W 5%
R37
18 8 121-6012-00 (101-0002473) R22, R23, R24, R25, R26, R27, R168, R169 Resistor SM 1206 Film 8.2KW 1/10W 5%
19 16 121-6013-01 (101-0002378) R38, R39, R40, R41, R42, R43, R44, R45, R46, Resistor SM 1206 Film 39KW 1/10W 5%
R47, R48, R49, R50, R51, R52, R53
20 16 125-6001-00 (121-0000056) C2, C66, C67, C68, C69, C70, C71, C72, C73, Capacitor SM 0805 Cer. .1UF 50V 10% X7R
C74, C75, C76, C77, C78, C79, C80
21 25 125-6002-00 (121-0000096) C13, C14, C15, C16, C17, C18, C19, C20, C21, Capacitor SM 0805 Cer. 470PF 50V 5% NPO
C30, C31, C32, C33, C34, C35, C36, C37, C59,
C60, C61, C62, C63, C64, C65, C81
22 18 125-6003-00 (121-0004236) C7, C12, C38, C39, C40, C41, C42, C43, C44, Capacitor SM 0805 Cer. .01UF 50V 10% X7R
C45, C46, C47, C48, C49, C50, C51, C52, C53
23 13 125-6004-00 (121-0005318) C22, C23, C24, C25, C26, C27, C28, C29, C54, Capacitor SM 0805 Cer. 22PF 100V 5% NPO
C55, C56, C57, C58
24 1 125-5032-00 (131-0003773) C1 Capacitor Tht. Radial Alum. 100UF 25V 20%
25 1 125-5034-00 (131-0003864) C5 Capacitor Tht. Radial Alum. 4700UF 35V 20%
26 1 125-5029-01 (133-0003741) C10 Capacitor Tht. Disc Cer. .1UF 500V 20%
27 1 125-6022-00 (134-0003846) C11 Capacitor Tht. Radial Alum. 330UF 160V 20%
28 5 125-5036-01 (134-0004000) C3, C4, C6, C8, C9 Cap. Tht. Rad. Al. 15000UF 35V 20% Snap-In
29 34 112-6001-01 (183-0004374) D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, Diode Tht. DO-41 1N4004 400V 1A
D12, D13, D14, D15, D16, D17, D18, D19, D20,
D21, D22, D23, D24, D25, D26, D27, D28, D29,
D30, D31, D32, D49, D74
30 5 112-5000-00 (187-0004700) BRDG1, BRDG2, BRDG3, BRDG4, BRDG5 Bridge Tht. Fullwave 100V 35A MB-35
31 10 110-0088-01 (203-0003591) Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q40, Fet Tht. TO-220 STP20NE06L NFet 60V 20A
Q41, Q42
32 16 110-0106-00 (203-0003592) Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Fet Tht. TO-220 20N10L NFet 100V 20A
Q12, Q13, Q14, Q15, Q16
33 8 110-0089-00 (203-0003597) U10, U11, U12, U13, U14, U15, U16, U17 Fet Tht. PENTAWAT VN02N NFet HighSide 26V 6A
34 2 110-0069-01 (211-0003589) Q44, Q45 Trans. SM SOT-23 MMST3904 NPN 40V 0.2A
35 16 110-0067-00 (213-0003565) Q17, Q18, Q19, Q20, Q21, Q22, Q23, Q24, Q25, Transistor Tht. TO-220 TIP122 NPN 100V 5A
Q26, Q27, Q28,Q29, Q30, Q31, Q32
36 3 100-6003-00 (221-0000972) U18, U22, U24 I.C. SM SOIC 74HC245 Oct. Bus. Xcvr.
37 1 100-6000-00 (221-0011253) U23 I.C. SM SOIC DS1832S, SO-8
38 8 100-5056-00 (221-0001287) U2, U3, U4, U5, U6, U7, U9, U21 I.C. SM SOIC 74HCT273 Oct. D F-F
39 2 100-6001-00 (221-0003728) U19, U20 I.C. SM SO 74LS138D Hex Inverter; 3-8 DC/DMX
40 1 100-6002-00 (221-0011135) U8 I.C. SM SOIC 74LS74AD SOIC-14
41 1 100-0356-00 (225-0003582) U1 I.C. Tht. TO-3 LM338 5A Adjust. Voltage Reg.
42 5 045- (315-0003427) J2, J6, J7, J10, J13 Con. Tht. Hdr. 10 Pin, 1 Row .156"
43 1 045- (315-0006910) J1 Con. Tht. Hdr. 20 Pin, 2 Row .1"
44 2 045- (315-0003430) J3, J12 Con. Tht. Hdr. 12 Pin, 1 Row .156"
45 1 045- (315-0003432) J16 Con. Tht. Hdr. 15 Pin, 1 Row .156"
46 1 045- (315-0003503) J11 Con. Tht. Pwr. 3 Pin, 1 Row .25"
47 1 045- (315-0003504) J14 Con. Tht. Pwr. 6 Pin, 2 Row .25"
48 1 045- (315-0003505) J17 Con. Tht. Pwr. 9 Pin, 3 Row .25"
49 3 045- (315-0003821) J8, J9, J15 Con. Tht. Hdr. 9 Pin, 1 Row .156"
50 2 200-5000-08 (407-0003117) F6, F8 Fuse 3 Amp 250V Slo-Blo (Glass, Tht. 3AG)
51 2 200-5000-06 (407-0003118) F7, F11 Fuse 4 Amp 250V Slo-Blo (Glass, Tht. 3AG)
52 7 200-5000-01 (407-0003119) F1, F2, F3, F4, F10, F12, F13 Fuse 5 Amp 250V Slo-Blo (Glass, Tht. 3AG)
53 1 200-5000-03 (407-0003121) F5 Fuse 7 Amp 250V Slo-Blo (Glass, Tht. 3AG)
54 1 200-5000-05 (407-0003122) F9 Fuse 8 Amp 250V Slo-Blo (Glass, Tht. 3AG)
55 1 121-5039-00 (415-0004788) POT1 Potiento THT 50W Single Top Adjust. Trimr.
56 1 165-6000-00 (425-0006913) L18 LED SM Yellow 0805 LED
57 5 165-6001-00 (425-0007753) L4, L6, L8, L16, L19 LED SM Green Ultrabright Top
58 13 165-6002-00 (425-0007755) L1, L2, L3, L5, L7, L9, L10, L11, L12, LED SM Red Ultrabright Top 0805 LED
L15, L17
59 1 190-5002-00 (448-0004778) RLY1 Relay Tht. GW DPDT10A DC24
2400VA PC MNT
60 1 127-5001-00 (461-0003520) for BRDG 4, BRDG 5 Heatsink, Sq. Finned Ba TO-220 Avid 531102
61 1 127-5001-02 (461-0003534) for U1 Heatsink All Large Finned Alum. TO-3
62 1 127-5001-04 (579103B00000G) for U1 on TO-3 LM338 5A Adj. Volt. Reg. Heatsink, Circular Finned (Mfg. Aavid)
Sec. 5: PCBs
63 4 240-5008-00 (503-0004469) 2 pcs. for U1 1 pc. each for BRDG 4 & 5 #6-32 Keps Nut
64 26 205-0004-00 (503-0004667) 2 pcs. each for F1 - F13 Fuseclip with End Stops (+ Ears)
65 4 237-5504-00 (504-0004610) 2 pcs. for U1 1 pc. each for BRDG 4 & 5 #6-32 X 3/4" PPH MS (Zinc) Screw
66 2 254-5007-02 (507-0004544) for BRDG 4 & 5 (Mfg. .169" I.D. X 9/32" O.D. X 1/4") 1/4" Slf. Rtn. Spacer White
67 5 254-5007-05 (507-0004547) for BRDG1, 2 & 3 and for Mounting Holes 5/16" Slf. Rtn. Spacer White

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 115
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 1 of 5)
5 4 3
VDDCORE VDDIO +3.3V
NWAIT [4] P24
R67 P25 [4]
VDDCORE P24 [3]
C55 C69 100K VDDIO NWE VDDIO
C54 C56
NCS0 NRD/ P23 [4] R65

P25 [3,4]
47PF 100nF 47PF 100nF NCS1 NOE 10K

P24 [4]
NWDOVF

MCKI
NCS2

C62

C61
TDO

TMS
TCK

P23
NRSTCPU +3.3V

TD I

[5]
NCS3
NUB

100
U8 RXD1

100nF

47PF
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
R208 100K

NWRO/NWE
VDDCORE

NRD/NOE
VDDIO

VDDIO
P27/NCS3
P26/NCS2

P24/BMS

P22/RXD1
NRST
NCS1
NCS0

MCKI
GND
GND

NWDOVF

GND
TDO
TCK

TDI

P23

NWR1/NUB
P25/MCKO
NWAIT

TMS
[3,4] A0/NLB P21/
TXD1/ +3.3V
1 NTRI 75 TXD1 [5] +3.3V
D [3,4] A[20 :1] 2 A0/NLB 74
A1 3 GND P20/SCK1 73
A2 4 A1 P19 72
A2 P18 P18
A3 5 71 P17
A3 P17 R64 C43
A4 6 70 P16
A5 7 A4 P16 69 100K
A5 P15/RXD0 RXD0 [5] 100nF
A6 8 68 TXD0 [5]
A7 9
10
A6
A7
P14/TXD0
P13/SCK0
67
66 IN T
Y1
VDDIO VDDIO P12/FIQ 1 4
A8 11 65 OE VCC
A9 12 A8 GND 64
A10
A11
13
14
A9
A10 AT91R40008 P11/IRQ2
P10/IRQ1
63
62
P10/I RQ1 2
GND OUT
3 R69 MCKI
A11 PQFP100 VDDIO
A12 15 61 33
A13 16 A12 VDDCORE 60 40.000MHz
A13 P9/IRQ0 IR Q0 [4]
A14 17 59
18 A14 P8/TIOB2 58
19 GND P7/TIOA2 57 +3.3V
A15 20 GND P6/TCLK2 56
A15 P5/TIOB1 MD [6]
A16 21 55 MC [6]
A17 22 A16 P4/TIOA1 54
A17 P3/TCLK1 ML [6] +4.5V
P29/A21/CS6

P30/A22/CS5
P31/A23/CS4

A18 23 53
A18 GND R68
VDDCORE

A19 24 52

P0/TCLK0
P1/TIOA0
A20 25 A19 GND 51 100K
VDDIO

VDDIO
P28/A20/CS7 P2/TIOB0
GND

D10
D11

D12
D13
D14
D15
R223
D0
D1
D2
D3
D4

D5
D6
D7
D8
D9
P10/ 10K
VDDIO IRQ1
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
AT91R4008
VDDCO RE
C70 C71 VDDIO C110
R86
47PF 100nF VDDIO 3.3K
C A21 0.01 UF
A22
D0
D1
D2
D3
D4

D5
D6
D7
D8
D9
0D1
1D1

2D1
3D1
4D1
5D1
A23
[3 ,4] D[15:0]
D1 0
D1 1

D1 2
D1 3
D1 4
D1 5
VDDCORE VDDIO VDDIO VDDCORE VDDIO
D0
D1
D2
D3

D4
D5
D6
D7

D8
D9
100K
100K
100K
100K

100K
100K
100K
100K

100K
100K
100K
100K

100K
100K
100K
100K
C50 C51 C49 C48 C53 C52 C74 C75 C64 C63
47PF 100nF 47PF 100nF 47PF 100nF 47PF 100nF 47PF 100nF
R84
R85
R82
R83

R80
R81
R78
R79

R76
R77
R74
R75

R73
R72
R71
R70

+3.3V

KEYSTONE 105 B1 TP11

24mm COIN CELL
R211 R212 +5V
2 1 D24
0
100
U9

32
SMT4148 +3.3V
+12V PLACE
24mmBAT SHORTING A0/NLB 12 1 A19

VCC
U54 TRACE
BETWEEN U43 A1
A2
11
10
A0
A1
VPP

3 2 D25 2 PADS A2
A3
VIN VOUT
SMT4148
OF 0 OHM
RESISTOR
Y2 1
VCC2 VCC1
8
A4
9
8 A3
A4 D0 13 D0
1 ADJ 2 7 P18 A5 7 14 D1
1

2 X1 SCLK A6 6 A5 D1 D2
LM317T R213 A6 D2 15
B 3 6 P17 A7 5 17 D3
R215 220 C256 R214 220 3 X2 I/O A8 A7 D3 D4
27 18
4

2.2 UF 220 A9 A8 D4 D5
R216 32.768KHz 4 5 P16 26
A9 D5 19
GND RST A10 23 20 D6
470 +5V A11 A10 D6 D7
25 21
D26 DS1302 A12 A11 D7
4
SMT4148 A13 A12
28
A14 29 A13
D28 C174 A15 A14
3 EPROM
0.1 UF A16 2 A15
SMT4148 A16 CS 22
A17 30
GND

A18 31 A17
A18 OE 24
R66 100K +3.3V +3.3V NRD/NOE
C255 27C040
16

0.22F

C77 C65 C219 C220

0.1 UF 0.1 UF 0.1 UF 0.1 UF
U11
32

C89
A0/N LB 12 13 D0 0.1 UF U13 U48
VCC

A1 11 A0 D0 14 D1
A2 10 A1 D1 15 D2 A5 1 44 A6 X2_A5 1 44 X2_A6
A2 D2 A4 A0 A17 A7 X2_A4 A4 A5 X2_A7
A3 9 17 D3 2 A1 A16 43 2 A3 A6 43
A4 8 A3 D3 18 D4 A3 3 42 A8 X2_A3 3 42 X2_A8
A4 D4 A2 A2 A15 NR D/NOE X2_A2 A2 A7 X2_NR D/ NOE
A5 7 19 D5 4 A3 OE# 41 4 A1 OE# 41
A6 6 A5 D5 20 D6 A1 5 40 NU B X2_A1 5 40 X2_NUB
A6 D6 U13_ CS A4 BHE# A0/NLB A0 BHE# X2_A0/ NLB
A7 5 21 D7 6 CS# BLE# 39 6 CS# BLE# 39
A8 27 A7 D7 +12V D0 7 38 D1 5 X2_D0 7 38 X2_D15
I/O0 I/O15 I/O0 I/O15
Sec. 5: PCBs

A9 26 A8 D1 8 37 D1 4 X2_D1 8 37 X2_D14
A9 I/O1 I/O14 I/O1 I/O14
I DT71V016SA

A10 23 D2 9 36 D1 3 X2_D2 9 36 X2_D13

I DT71V416YS

A10 RESET# D3 I/O2 I/O13 D1 2 X2_D3 I/O2 I/O13 X2_D12

A11 25 10 I/O3 I/O12 35 10 I/O3 I/O12 35
A A11
SOJ44
SOJ44

A12 4 +3.3V 11 VDD VSS 34 +3.3V 11 VDD VSS 34

A13 A12 NC 1 R225 [ 2,3 ] 12 33 12 33
28 3 VSS VDD +3.3V VSS VDD +3.3V X2_D11
A14 3 A13 10K D4 13 32 D1 1 X2_D4 13 32
A14 D5 I/O4 I/O11 D1 0 X2_D5 I/O4 I/O11 X2_D10
A15 31 14 I/O5 I/O10 31 14 I/O5 I/O10 31
A16 2 A15 D6 15 30 D9 X2_D6 15 30 X2_D9
A16 1 D7 16
I/O6 I/O9
29 D8 X2_D7 16
I/O6 I/O9
29 X2_D8
I/O7 I/O8 I/O7 I/O8
30
CE2 WE
29 RAMW 2 Q10 NW E 17 WE# NC 28 X2_NWE 17 WE# NC 28
A16 18 27 A9 X2_A16 18 27 X2_A9
GND

24 NR D/NOE MMBF170 A15 A5 A14 A10 X2_A15 A15 A8 X2_A10

BRAM 22 19 A6 A13 26 19 A14 A9 26
CE1 OE A14 20 25 A11 X2_A14 20 25 X2_A11
A13 A7 A12 A12 X2_A13 A13 A10 X2_A12
128K X 8 RAM 21 A8 A11 24 21 A12 A11 24
16

A17 22 23 A18 22 23
A9 A10 NC NC
IDT71V416YS IDT71V016SA

5 4 3

Section 5, Chapter 4 Printed Circuit

Page 116 Boards (PCBs)
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 1 of 5)
3 2 1

+3.3V +3.3V
TEST POINTS
TP3 TP4 TP5 TP6 TP7 TP8 TP9TP10
C46 C45 C44 C40 C42 C67 C68 C47 C202 C203 C204 C205 C206 C207 C208 C209
0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF

+3.3V +3.3V +3.3V +3.3V RESET#

MCKI
U7 U42 INT
IR Q0
NCS0
IN T 1 51 D7 1 51 NCS1
U13_ CS 2 I/O1 VCC4 52 NR D/NOE Z4 2 I/O1 VCC4 52 NCS0 D
NCS2
SC KI 3 I/O I/O30 53 NUB D6 3 NC1 I/O30 53 NCS1 NCS3
Z5 4 I/O/GTS1 I/O31 54 A1 D5 4 I/O/GTS1 I/O31 54 NCS2 SWSTB [3]
5 I/O/GTS2 I/O32 55 A2 5 I/O/GTS2 I/O32 55 NCS3 DPSW [3]
X2_A0/ NLB 6 VCC1 I/O33 56 A3 D4 6 VCC1 I/O33 56 NW DOVF DSW [3]
Z1 7 I/O2 I/O34 57 P24 7 I/O2 I/O34 57 SWM [3]
X2_NWE 8 NC2 VCC5 58 A4 D3 8 NC2 VCC5 58 SCKI [6]
I/O3 I/O35 I/O3 I/O35 RESET# [ 3,5]
X2_NUB 9 59 A5 D2 9 59 IOPORT [3]
X2_NR D/ NOE 10 I/O4 I/O36 60 A6 D1 10 I/O4 I/O36 60
I/O5 I/O37 I/O5 I/O37 IORESET [3]
DS W 11 61 A7 D0 11 61 EPROM
D PSW 12 I/O6 I/O38 62 D1 5 12 I/O6 I/O38 62
SWSTB 13 I/O7 GND5 63 A8 D1 4 13 I/O7 GND5 63 BRAM
A21 14 I/O8 I/O39 64 A9 D1 3 14 I/O8 I/O39 64 SDATA
A22 15 I/O9 I/O40 65 A10 D1 2 15 I/O9 I/O40 65 DIN
I/O10 I/O41 I/O10 I/O41 DIN [6]
A23 16 66 A11 D1 1 16 66 A23
A17 17 I/O11 I/O42 67 A12 D1 0 17 I/O11 I/O42 67 A22
A18 18 I/O12 I/O43 68 A13 D9 18 I/O12 I/O43 68 A20
Z3 19 I/O13 I/O44 69 A21 19 I/O13 I/O44 69
NCS3 20 NC3 GND6 70 A14 D8 20 NC3 GND6 70 WF 0
21 I/O14 I/O45 71 A15 21 I/O14 I/O45 71 GF 0
MCKI 22 GND1 I/O46 72 A16 MCKI 22 GND1 I/O46 72 FF1
NW E 23 I/O/GCK1 I/O47 73 Z2 X2_D8 23 I/O/GCK1 I/O47 73 Z6
24 I/O/GCK2 NC8 74 X2_A5 24 I/O/GCK2 I/O 74 WF 1
A20 25 GND2 I/O48 75 X2_D7 25 GND2 I/O48 75
26 I/O15 GND7 76 X2_A4 26 I/O15 GND7 76 GF1 +3.3V
A19 27 VCC2 I/O49 77 X2_A3 X2_D9 27 VCC2 I/O49 77 FF3
DE 28 I/O/GCK3 I/O50 78 X2_A2 X2_D6 28 I/O/GCK3 I/O50 78 FF2
ROWDATA 29 I/O16 I/O51 79 X2_A1 X2_D10 29 I/O16 I/O51 79 A15
ROWC LK 30 I/O17 I/O52 80 Z4 X2_D5 30 I/O17 I/O52 80 Z7
31 I/O18 NC9 81 X2_A16 31 I/O18 I/O 81 A16
TP18 COL
LATCH_A GND3 I/O53 GND3 I/O53 R54 R224
32 82 X2_A15 X2_D11 32 82
PIXCLK 33 I/O19 I/O54 83 XTDA X2_D4 33 I/O19 I/O54 83 XTDO 330 330
34 I/O20 TDO 84 X2_D12 34 I/O20 TDO 84 C
COLLATCH_B 35 NC5
I/O21
GND8
I/O55
85 X2_A14 X2_D3 35 NC5
I/O21
GND8
I/O55
85 Z5 4 3 LED3
D5 36 86 X2_A13 X2_D13 36 86 IOSTB LED-
I/O22 I/O56 I/O22 I/O56 IOSTB [3] RED+ YG
D6 37 87 X2_A6 X2_D2 37 87 USB [4]
38 I/O23 I/O57 88 38 I/O23 I/O57 88 YG RED
D7 39 VCC3 VCC6 89 X2_A7 X2_D14 39 VCC3 VCC6 89 BCKIN
I/O24 I/O58 I/O24 I/O58 BCKIN [6]
D0 40 90 X2_A8 X2_D1 40 90 LRC IN LRCIN [6]
D1 41 I/O25 I/O59 91 X2_A12 X2_D15 41 I/O25 I/O59 91
I/O26 I/O60 I/O26 I/O60 BRESET#
D2 42 92 X2_A11 X2_D0 42 92 Z2 [4]
Z6 43 I/O27 I/O61 93 X2_A10 A14 43 I/O27 I/O61 93 Z3
I/O I/O62 NC6 I/O62 2 1
44 94 X2_A9 44 94 A19
XTDI 45 GND4 I/O63 95 SWM XTDA 45 GND4 I/O63 95 LED_STAT
Z7 46 TDI I/O64 96 BCKIN Z1 46 TDI I/O64 96 NRSTCPU
XTMS 47 I/O I/O65 97 A0/N LB XTMS 47 NC7 I/O65 97 RAMW
XTCK 48 TMS I/O66 98 XTCK 48 TMS I/O66 98
D3 49 TCK VCC7 99 LRC IN NR D/NOE 49 TCK VCC7 99 MPIN
D4 I/O28 I/O/GSR I/O28 I/O/GSR MPIN [3]
50 100 NW E 50 100
I/O29 GND9 I/O29 GND9

XC95144XL XC95144XL
+5V

+3.3V
+3.3V
C257

U55
20

0.1UF
+3.3V
C175 C176 J5
J7
VCC

R114 R115 R116 R28 0.1 UF 0.1 UF DE 18 2 1 2

1K 1K 1K 10K ROWDATA 17 B1 A1 3 3 4
1 2 ROWC LK 16 B2 A2 4 5 6
4
TDI 3 5 6 COLLATCH_A 15 B3 A3 5 7 8
TCK TMS PIXCLK 14 B4 A4 6 9 10
7 8
TDO TCK SDATA 13 B5 A5 7 11 12 B
9 10
TDI COLLATCH_B 12 B6 A6 8 13 14
12
TMS TDO 11 13 14 11 B7 A7 9
B8 A8
47PF C259

47PF C260

47PF C261

47PF C262

47PF C263

47PF C264

47PF C265
NRSTJTAG NRSTJTAG 15 16 2x7
18 19
GND

17 OE 1
20
19 DIR
C88 C87 C84 C85 C86 +3.3V
10PF 10PF 10PF 10PF 10PF 2x10 74HCT245
10

PROCESSOR
JTAG
+3.3V +3.3V
R193 R194
+3.3V +3.3V 10K 10K
C211 C212 C243
U44 U45 C213 C214 C244
0.1UF 0.1UF 0.1UF FF2 1 56 FF3 FF2 1 56 FF3 0.1UF 0.1UF 0.1UF
FF1 2 A23 A24 FF1 2 A23 A24 VPEN
A16 A22 NC 55 A17 A16 A22 NC 55 A17
3 54 3 54
A15 4 A15 A16 53 BYTE# A15 4 A15 A16 53 BYTE# BYTE#
A14 5 A14 BYTE# 52 A14 5 A14 BYTE# 52
A13 6 A13 VSS 51 D15 A13 6 A13 VSS 51 D15
A12 DQ15/A-1 A12 DQ15/A-1 +3.3V +3.3V +3.3V
A12 7 50 D7 A12 7 50 D7
A11 A11 DQ7 D14 A11 DQ7
8 49 C210 A11 8 49 D14
A10 9 A10
A9
DQ14
DQ6
48 D6 A10 9 A10
A9
DQ14
DQ6
48 D6 XILINX
R96 R95 R94
+3.3V A9
A20
10
11 A8 DQ13
47
46
D13
D5
100nF A9 10
A20 11 A8 DQ13
47
46
D13
D5
C177
0.1 UF 1K 1K 1K
JTAG
A21 12 A19 DQ5 45 D12 A21 12 A19 DQ5 45 D12
R195
WF 0 13 A20
WE#
DQ12
DQ4
44 D4 WF1 13 A20
WE#
DQ12
DQ4
44 D4 J8
Sec. 5: PCBs
10K RESET# 14 43 RESET# 14 43
A22 15 RESET# VCC 42 D11 A22 15 RESET# VCC 42 D11 1
2 1 16 A21 DQ11 41 D3 VPEN 16 A21 DQ11 41 D3 2
WP#/ACC DQ3 WP#/ACC DQ3 XTCK A
P10/IRQ1 17 40 D10 P10/IRQ1 17 40 D10 XTDO 3
A19 18 RY/BY# DQ10 39 D2 A19 18 RY/BY# DQ10 39 D2 4
1X2 A18 DQ2 A18 DQ2 XTDI
A18 19 38 D9 A18 19 38 D9 XTMS 5
JP1 A8
A7
20
21
A17
A7
DQ9
DQ1
37
36
D1
D8
A8
A7
20
21
A17
A7
DQ9
DQ1
37
36
D1
D8
6
S29GL128NS

A6 DQ8 A6 DQ8 1X6

S29GL128N

A6 22 35 D0 A6 22 35 D0
A5 DQ0 A5 DQ0
TSOP56

TSOP56

A5 23 34 GF0 A5 23 34 GF1
A4 24 A4 OE# 33 A4 24 A4 OE# 33
A3 VSS A3 VSS
A3 25
A2 CE#
32 A3 25
A2 CE#
32 STERN PINBALL, INC.
A2 26 31 A1 A2 26 31
A1 A0 A1 A0 A1
27
28
NC
NC
NC
VIO
29 30
27
28
NC
NC
NC
VIO
29 30
CPU / Sound PCB (S.A.M. System)
520-5246-00 Sheet 1 of 5 Rev. G 041806
S29GL128N S29GL128N

3 2 1

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 117
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 2 of 5)
5 4 3

+3.3V

C121
0.1 UF
U25
[2,4] D [15:0]
D0 18 2
D0 D1 17 B0 A0 3
B1 A1
D1
D2
D2
D3
16
15 B2 A2
4
5 J9
D3 D4 14 B3 A3 6 2 1
D4 D5 13 B4 A4 7 4 3
D5 D6 12 B5 A5 8 6 5
D6 D7 11 B6 A6 9 8 7
D B7 A7
D7
10 9

47PF

47PF

47PF

47PF

47PF

47PF

47PF

47PF
D8 20 1 12 11
D9
+3.3V VCC DIR IOPORT NWE [2,4 ]
10 19 14 13
D10 GND OE 16 15
D11 74LVC245 18 17
+3.3V

C124

C120

C118

C116

C106

C117

C119

C122
D12 20 19
D13
D14 2x10
D15 C123
0.1 UF
U26
2 18
[2,4] A0/NLB 3 A0 B0 17
[2,4] A1 4 A1 B1 16
[2,4] A2 5 A2 B2 15
[2] [2,4] A3 6 A3 B3 14
IORESET [2,4] A4 A4 B4
7 13
R133 Q9 [2] IOSTB A5 B5
8 12
2N3904 [2,5] RESET# 9 A6 B6 11
1K [2] A9 A7 B7
R134

47PF

47PF

47PF

47PF

47PF

47PF

47PF

47PF
10K +3.3V 1 20 +3.3V
19 DIR VCC 10
[2] IOPORT OE GND +3.3V
+3.3V
74LVC245

C125

C127

C146

C149

C148

C147

C145

C126
C78

10K
10K
10K
10K
10K
10K
10K
10K
0.1 UF

D10
+5V +4.5V
C173
U14
4.7K

C +3.3V DL4004

R102
R103
R120
R100
R119
1K

1K

1K

1K

1K

1K

1K

R101
1K

100 UF

R98
R99
C26 D0 2 18 U22A
3 A0 B0 17 U22B
0.1 UF D1
U2 J2 D2 4 A1 B1 16 U22C
R16

R15

R14

R13

R12

R11

R10

R17
R9

5 A2 B2 15 U22D
D3
6 A3 B3 14 U15A
2 18 R35 39K 1 D4
D0 7 A4 B4 13 U15B
3 A0 B0 17 R36 39K 2 D5
D1 8 A5 B5 12 U15C
A1 B1 3 D6
D2 4
A2 B2
16 R39 39K
4 KEY PIN 5 D7 9 A6 B6 11 U15D
D3 5 15 R40 39K A7 B7
6 A3 B3 14 R41 39K 5
D4
7 A4 B4 13 R42 39K 6 1 20 +3.3V
D5 DIR VCC
8 A5 B5 12 R43 39K 7 19 10
D6 OE GND
9 A6 B6 11 R44 39K 8
D7
A7 B7 R19 4.7K 9 74LVC245
10
1 20 +3.3V
DIR VCC 11
47PF

47PF

47PF

47PF

47PF

47PF

47PF

47PF

19 10 SWM [2]
OE GND 12
74LVC245 1X12
C16

C15

C14

C13

C12

C11

C10

C9

DSW
MPIN
+4.5V

C27
1K

1K

1K

1K

1K

1K

1K

1K

R45
0.1UF
3.3K

U4
R26

R25

R24

R23

R22

R21

R20

R18

J3
D8 2 18 R46 39K
B +3.3V A0 B0 1
KEY PIN 3

D9 3 17 R47 39K
4 A1 B1 16 R48 39K 2
D10
5 A2 B2 15 R49 39K 3
D11
C29 6 A3 B3 14 R50 39K 4
D12
0.1 UF 7 A4 B4 13 R51 39K 5
D13
D14 8 A5 B5 12 R52 39K 6
9 A6 B6 11 R53 39K 7
D15
A7 B7 8 +3.3V +3.3V
+3.3V 9
1 20 +3.3V
DIR VCC 10
47PF

47PF

47PF

47PF

47PF

47PF

47PF

47PF

+3.3V 19 10
OE GND C184
1X10
1K
1K
1K
1K
1K
1K
1K

10K
10K
10K
10K
10K
10K
10K
10K
74LVC245 0.1 UF
C31
C24

C23

C22

C21

C20

C19

C18

C17

0.1 UF DSW
U5 U36
SW1
R55
R56
R57
R58
R59
R60
R61

R159
R160
R161
R162
R163
R164
R165
R166

D8 2 18 1 16
D9 3 A0 B0 17 D8 2 18 U35A
2 15 A0 B0
D10 4 A1 B1 16 D9 3 17 U35B
3 14 A1 B1
D11 5 A2 B2 15 D10 4 16 U35C
4 13 A2 B2
D12 6 A3 B3 14 D11 5 15 U35D
5 12 +4.5V A3 B3
D13 7 A4 B4 13 +3.3V D12 6 14 U40A
6 11 A4 B4
D14 8 A5 B5 12 D13 7 13 U40B
7 10 A5 B5
1K

1K

1K

1K

1K

1K

1K

1K

D15 9 A6 B6 11 D14 8 12 U40C

8 9 A6 B6
A7 B7 D15 9 11 U40D
A7 B7
1 20 SW DIP8
DIR VCC +3.3V 1 20
19
OE GND
10
[2] P24 U41 DIR VCC +3.3V
R75

R76

R77

R78

R79

R80

R81

R82

19 10
J13 OE GND
Sec. 5: PCBs

74LVC245
KEY PIN 2

D0 2 18 R183 39K 74LVC245

+3.3V A0 B0 1
D1 3 17 R184 39K
A DPSW A1 B1 39K 2
D2 4 16 R185 SWM [2]
5 A2 B2 15 39K 3
D3 R186
C185 6 A3 B3 14 39K 4
D4 R187
0.1 UF 7 A4 B4 13 39K 5
D5 R188
8 A5 B5 12 39K 6
D6 R189
9 A6 B6 11 39K 7
D7 R190
A7 B7 8
9
1 20 +3.3V
DIR VCC 10
47PF

47PF

47PF

47PF

47PF

47PF

47PF

47PF

19 10
OE GND
1X10
74LVC245
C201
C194

C195

C196

C197

C198

C199

C200

DPSW

5 4 3

Section 5, Chapter 4 Printed Circuit

Page 118 Boards (PCBs)
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 2 of 5)
3 2 1
+3.3V +4.5V

1K

1K

1K

1K

1K

1K

1K

1K
C25
0.1 UF

R1

R2

R3

R4

R5

R6

R7

R8
+3.3V
U1
RESET# 1 20
[2] SWSTB
11 (MR#)CLR# VCC
CP
R29 1K Q1
2N3904 R30 1K Q2 J1
2N3904
D0 3 2 1

PIN 2
KEY
D1 4 (D0)1D 1Q(Q0) 5 2
D2 7 (D1)2D 2Q(Q1) 6 3
D3 8 (D2)3D 3Q(Q2) 9 R31 1K Q3 4 D
D4 13 (D3)4D 4Q(Q3) 12 2N3904 R32 1K Q4 5
D5 14 (D4)5D 5Q(Q4) 15 2N3904 6
D6 17 (D5)6D 6Q(Q5) 16 7
D7 18 (D6)7D 7Q(Q6) 19 8
(D7)8D 8Q(Q7) 9
R33 1K Q5
+4.5V 10 2N3904 R34 1K Q6
GND 2N3904 1X9
74LV273 SWITCH
COLUMNS
R121
3.3K R37 1K Q7

0.1 UF

0.1 UF

0.1 UF

0.1 UF

0.1 UF

0.1 UF
0.1 UF

0.1 UF
2N3904 R38 1K Q8
2N3904
VREF

C1

C2

C3

C4

C5

C6

C7

C8
+4.5V
3
V+ 5
R122
3.3K 2 +4.5V
A
4 VREF
U22A

1K

1K

1K

1K

1K

1K

1K

1K
VREF
C102 12 V- +4.5V
3
LM339 V+ 7
22UF 1
B

R128

R126

R124

R109

R107
R113

R105
R111
6
U22B
12 V-
+4.5V LM339
3 R127 220 D9 SMT4148
V+ 9
14
C R125 220 D8 SMT4148
8 VREF
U22C J6
VREF

C
12 V- +4.5V
3 D7
LM339 V+ 11 R123 220 SMT4148
U22A 10
13 9
U22B D
10
U22C
U22D
U22D R112 220 D5 SMT4148 8
7
12 V- 6

KEY PIN 4
U15A LM339
U15B +4.5V R110 220 D4 5
3 4
U15C V+ 5 SMT4148
2 3
U15D
A R108 220 D3 2
4 VREF
U15A SMT4148
1
VREF

12 V- +4.5V 1X10
3
LM339 V+ 7 R106 220 D2
SWITCH
1 SMT4148 ROWS
B
6
U15B R104 220 D1
SMT4148
12 V-
+4.5V LM339
3
V+ 9
0.1 UF

0.1 UF

0.1 UF

0.1 UF

0.1 UF

0.1 UF
0.1 UF

0.1 UF

14
C
8 VREF
U15C
VREF

12 V- +4.5V
3
LM339 V+
C105

C104

C103

11
C83

C82

C81

C80

C79

13
D
10
U15D
12 V-
+4.5V LM339
3 B
V+ 5
2 +4.5V
A
4 VREF
U35A
1K

1K

1K

1K

1K

1K

1K

1K
VREF

12 V- +4.5V
3
LM339 V+ 7
1
B
R151

R152

R153

R154

R155

R156

R157

R158

6
U35B
12 V-
+4.5V LM339
3 R167 220 D11 SMT4148
V+ 9
14
C R168 220 D12 SMT4148
8 VREF
U35C J12
VREF

12 V- +4.5V
3 D13
LM339 V+ 11 R169 220 SMT4148
U35A 10
13 9
U35B D
10
U35C U35D R170 220 D14 SMT4148 8
KEY PIN 5

U35D 7
12 V- 6
U40A LM339
U40B +4.5V R171 220 D15 5
3 4
U40C V+ 5 SMT4148
U40D 2 3
A R172 220 D16 2
4 VREF
U40A SMT4148
1
VREF

12 V- +4.5V 1X10
3
Sec. 5: PCBs
LM339 V+ 7 R173 220 D17
SWITCH
1 SMT4148 ROWS
B
6
U40B R174 220 D18
SMT4148
A
12 V-
+4.5V LM339
3
V+ 9
0.1 UF

0.1 UF

0.1 UF

0.1 UF

0.1 UF

0.1 UF
0.1 UF

0.1 UF

14
C
8 VREF
U40C
VREF

12 V- +4.5V
3
V+
STERN PINBALL, INC.
LM339
C186

C187

C188

C189

C190

C191

C192

C193

11
13
D
10
CPU / Sound PCB (S.A.M. System)
U40D 520-5246-00 Sheet 2 of 5 Rev. G 041806
12 V-
LM339
3 2 1

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 119
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 3 of 5)
5 4 3

+3.3V +3.3V
D

C258
U6 0.1 UF
1 20
(MR#)CLR# VCC
DC LK 11
CP
[2,3 ] A[ 20: 1]
A7 3 2 1
A6 (D0)1D 1Q(Q0) 2
4 5
A5 (D1)2D 2Q(Q1) 3
7 6
A4 (D2)3D 3Q(Q2) 4
8 9
A3 (D3)4D 4Q(Q3) 5
13 12
A2 (D4)5D 5Q(Q4) 6
14 15
A1 (D5)6D 6Q(Q5) 7
17 16
(D6)7D 7Q(Q6) 8
[2,3 ] A0/NLB 18 19
(D7)8D 8Q(Q7) 9
[2] USB
10 [2] NRD/NOE 10
GND 11
[2,3 ] NW E
74LV273 [2] IRQ0 12

14
C
[2] P25 16
[2] NWAIT 17

+3.3V DECOUPLING CAPACITORS C95 C96

PLACE NEXT TO VDD PINS
2.2UF 470PF

C221 C222 C223 C224 C252 C253 C254

4. 7UF 0.1 UF 0.1 UF 0.1 UF 0.1 UF 0.1 UF 0.1 UF

+5V

B L3
15UH
C241 C178
0.1 UF 4.7UF

J15
HOST 1
USB +V [2] BRESET#
TYPE A 2 DATA– R129 USB_DM
33
D-
3 DATA+ R130 33 USB_DP
D+
4 RPD_EN
GND
R11 7 R11 8
15K 15K
S

S
6

5
Sec. 5: PCBs

5 4 3

Section 5, Chapter 4 Printed Circuit

Page 120 Boards (PCBs)
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 3 of 5)
3 2 1

[2,3 ] D[ 15: 0]
+3.3V

D10

D11
D12
D13
D14
D15
D0
D1
D2
D3
D4

D5
D6
D7
D8
D9
D

100
U49

99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
D0
D1
D2
D3
D4

D5
D6
D7
D8
D9
D10

D12
D13
D14
D15

D16
D17
D18
D19
VDD
VSS

VSS

VSS
BWIDTH[1]
D11
+3.3V
+3.3V

1 75
2 A7 VDD 74
3 A6 D20 73
4 A5 D21 72
5 A4 D22 71
6 A3 D23 70
7 A2 D24 69
8 A1 D25 68
9 A0 D26 67
10 CS_N D27 66
11 OE_N VDD 65
12 WE_N VEXT3 64
INTR_OUT VSS C101 C107
13 63
14 VSS AT43USB380 D28 62 470PF 2.2UF
15 VEXT1
VDD
PQFP100 D29
D30
61 C
16 60
17 SYS_CLK D31 59
WAIT_N WAKEUP_EN P23 [2]
18 58
19 DREQ_N BWIDTH[0] 57
20 DACK_N TP4 56
21 CPCLK RCV_DATA 55 +3.3V
DISCHARGE DCLK DCLK
22 54
23 EN TP5 53 R218 1K
R91 LOW_CUR SO
10K 24 52
25 PUMP_EN SCK 51
SESS_LOW VSS
SESS_HIGH
SESS_END
SESS_VLD

RESET_N
CLK_SEL

RPD_EN
RPU_EN
VEXT2
XTAL1
XTAL2

VDD

VDD
VSS

VSS

VSS
TP0
TP1

TP2
TP3
LFT

DM
DP

CS
ID

SI

+3.3V AT43USB380
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

R27
0 B
+3.3V

R92
R62
0 100K

USB_DM

USB_DP

RPD_EN

TP12
Sec. 5: PCBs

Y3 A

1 2 R93
330
C30 6.000MHz C66 C97 C98 C99 C100
22PF 22PF .033UF .033 UF 470PF 2. 2UF STERN PINBALL, INC.
CPU / Sound PCB (S.A.M. System)
520-5246-00 Sheet 3 of 5 Rev. G 041806

3 2 1

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 121
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 4 of 5)
5 4 3

+5V +3.3V VDDIO TP1

+3.3V

U34 R147
100
3
VIN
2
D VOUT LED1
1 C171 C172 LED-GRN
ADJ
0.1 UF 100 UF
LT1086

TP2
U3
VD DCORE 1 8
VDDCORE VOUT C2-
2 7 C28
C1- GND
C57 C58 C60 1.0 UF
10UF 3 6
1.0 UF 1.0 UF C1+ C2+

+3.3V 4 5
VIN SHDN/SS +3.3V
C182 C59 LT1503
C
0.1 UF 10UF

TP13
L4 L5
+5V
C92 C247 FB095_3712 C248 FB095_3712
0.1 UF 47 UF 0.1 UF
J11
TP14 +5V_IN
1
L6 L7 –12V_IN
2
–12V 3
4
C91 C249 FB095_3712 C250 FB095_3712 +12V_IN 5
B
6
0.1 UF 47 UF 0.1 UF
1X6
POWER IN
TP15
L8 L9
+12V
C90 C293 FB095_3712 C251 FB095_3712
0.1 UF 47 UF 0.1 UF

GROUND POSTS
MH2 MH8 MH3
ZG2 1 3
1 1 1 3 1 1
2
2 2 2 2 2
ZG3 5 4
5 4
Mounting Hole Mounting Hole Mount ing Hole
ZG4 0.235 with Vias
MH7 MH4
Sec. 5: PCBs

ZG5 1 3 1 3
1 3 1 3
2
2 MOUNTING 2
2
A ZG6 5
5 4
4 HOLES 5
5 4
4

Mounting Hole Mounting Hole

ZG7 0.235 with Vias 0.235 with Vias

ZG8 MH1 MH5 MH6

FIDUCIALS TOOLING HOLES 1 3
1 1 1 3 1 1
2
ZG9 FID1 FID2 FID3 TH1 TH2 TH3 2 2 2 2 2
5 4
5 4
ZG1 0 FID4 FID5 FID6 FID7
Mounting Hole Mounting Hole Mount ing Hole
0.235 with Vias

5 4 3

Section 5, Chapter 4 Printed Circuit

Page 122 Boards (PCBs)
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 4 of 5)
3 2 1

+3.3V

R148
100

LED2
+3.3V +3.3V LED-YEL D

C168
U32
0.1 UF 3 2
VCC RESET# RESET# [2, 3]
C167

GND
GND
0.01 UF
DS1233

1
4
S1
1 4

2 3

SPST520

+5V

C1+
C33
U52 C37

1 2 V+ 0.1 UF
0.1 UF C1- C+ V+ 6 V-
V-
C2+
3
4 C1- 14 C41
SERIAL A J4
C2+ T1OUT 13
C39 5
R1IN 0.1 UF
5 7
0.1 UF C2- C2- T2OUT 9
8 4
R2IN
11 8
[2] TXD0 12 T1IN 16 RS232_TD0
[2] RXD0 +5V 3
10 R1OUT VCC
7
[2] TXD1 T2IN RS232_R D0
9 15 2
[2] RXD1 R2OUT GND C72
10UF 6
SP232ACN 1 B

DE9P

10
11
C34 C36 C38 C35
22PF 22PF 22PF 22PF

+5V

J14
R88 1
3.3K
L2
1 2 3 4 5 6

RS232_TD1 2
3
U53 RS232_R D1 4
C1+ 2 V+ 5 FB-0805
1
C+ V+ 6 V- 6
Sec. 5: PCBs

C1- V-
3 6MOD6
C2+ C1- 14 RS232_TD0
4 A
C2+ T1OUT 13 RS232_R D0 PHONE
R1IN JACK
C2- 5 7 RS232_TD1
C2- T2OUT 8 RS232_R D1
TXD0 R2IN
11
RXD0 T1IN 16
12 +5V
TXD1 R1OUT VCC STERN PINBALL, INC.
10
RXD1 T2IN 15
9
R2OUT GND CPU / Sound PCB (S.A.M. System)
SP232ACT
520-5246-00 Sheet 4 of 5 Rev. G 041806

3 2 1

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 123
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 5 of 5)
5 4 3

U16
R220 47 1 16
[2] BCKIN BCK SCK MD [2]
R221 47 2 15
[2] DIN DATA ML MC [2]
R222 47 3 14
[2] LRCIN LRCK MC ML [2]
4 13 R219 47
DGND MD SC KI [2]
D
+5 AUD
5 NC ZEROL/NA 12
6
VCC ZEROR/OA 11
C165 7 10
VOUTL VCOM
10UF 8 9 C166
VOUTR AGND C162
10UF R89 R90 680PF
PCM1755 100K 100K

C76 10UF R146 10K R145 10K

C94 10UF R143 10K R142 10K

C160
680PF

C163 1500PF R139 10K

TP16 +5 AUD
U30 TP17 C161
1 8
OUTA V+
R144 10K 2 7 0.01 UF
-INA OUTB
3 6
C159 1500PF +INA -INB
4 5
V- +INB
R141 10K OPA2353

C108 C109
470PF 470PF

R137 10K

U33 L1
Sec. 5: PCBs

1 3
GND

+12V IN OUT +5 AUD

A
FB-0805
LM340T-5.0 C169 C170
2

0.1 UF 10UF

5 4 3

Section 5, Chapter 4 Printed Circuit

Page 124 Boards (PCBs)
 CPU / SOUND PCB S.A.M. System (520-5246-00) Schematic (Sheet 5 of 5)
3 2 1

R209 47K C225 10 UF R198 22K R199 470

R200 22K

U50
+12V 1 2
5 VIN VIN
+VS
C
-VS

4
OUT
C226 C227 TDA2030A
3

D19 D20 C228

C32 100 UF 0.1 UF
R201 22UF
DL4004 DL4004 1.0
680PF
-12V

R63 C229 J10

47K C230 C231 C232
100 UF 1
0.1 UF 0.1 UF 0.1 UF
2
3
4
1X4

R202 0 C233 10 UF R203 22K R204 470 B

R205 22K

1 U51
1

+12V 2
VIN

5 VIN
+VS
-VS

4
OUT
C234 C235 TDA2030A
3

D21 D22 C236

100 UF
C73 0.1 UF
R206 22UF
DL4004 DL4004 1.0
680PF
-12V
C237
Sec. 5: PCBs
C238 C239 C240
100 UF
0.1 UF 0.1 UF 0.1 UF A

STERN PINBALL, INC.

CPU / Sound PCB (S.A.M. System)
520-5246-00 Sheet 3 of 5 Rev. G 041806

3 2 1

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 125
 CPU / SOUND PCB S.A.M. System (520-5246-00) Component Layout

CPU / SOUND PCB S.A.M. System (520-5246-00) Component Parts

ITEM QTY. SPI PART NUMBER (MFG. P.N.) REF-DESIGNATOR DESCRIPTION (SM = Surface Mount)
Sec. 5: PCBs

— 1 520-5246-00 CPU/Sound PCB (S.A.M. System), Rev. G (includes Items 1-90)

1 3 121-6017-00 (101-0001790) R27, R202, R212 Resistor SM 0805 0.0W 1/10W 5%
2 2 121-6108-00 (101-0001792) R201, R206 Resistor SM 0805 1.0W 1/10W 5%
3 24 121-6001-00 (101-0001807) R9, R10, R11, R12, R13, R14, R15, R16, R18, Resistor SM 0805 1.5KW 1/10W 5%
R20, R21, R22, R23, R24, R25, R26, R175,
R176, R177, R178, R179, R180, R181, R182
4 3 121-6002-00 (101-0001820) R147, R148, R211 Resistor SM 0805 Film 100W 1/10W 5%
5 24 121-6019-00 (101-0001823) R64, R66, R67, R68, R70, R71, R72, R73, R74, Resistor SM 0805 100KW 1/10W 5%
R75, R76, R77, R78, R79, R80, R81, R82, R83,
R84, R85, R89, R90, R92, R208
6 33 121-6020-00 (101-0001827) R28, R65, R91, R98, R99, R100, R101, R102, Resistor SM 0805 Film 10KW 1/10W 5%
R103, R119, R120, R134, R137, R139, R141, R142,
R143, R144, R145, R146, R159, R160, R161, R162, R163,
R164, R165, R166, R193, R194, R195, R223, R225
7 2 121-6021-00 (101-0001880) R117, R118 Resistor SM 0805 15KW 1/10W 5%

Parts List Continued Next Page.

Section 5, Chapter 4 Printed Circuit

Page 126 Boards (PCBs)
 CPU / SOUND PCB S.A.M. System (520-5246-00) Parts Continued
ITEM QTY. SPI PART NUMBER (MFG. P.N.) REF-DESIGNATOR DESCRIPTION (SM = Surface Mount)
8 47 121-6022-00 (101-0001905) R1, R2, R3, R4, R5, R6, R7, R8, R29, R30, R31, Resistor SM 0805 1KW 1/10W 5%
R32, R33, R34, R37, R38, R55, R56, R57, R58, R59, R60, R61, R94, R95, R96, R105, R107, R109,
R111, R113, R114, R115, R116, R124, R126, R128, R133, R151, R152, R153, R154, R155, R156,
R157, R158, R218, LED2
9 19 121-6004-00 (101-0001943) R104, R106, R108, R110, R112, R123, R125, Resistor SM 0805 Film 220W 1/10W 5%
R127, R167, R168, R169, R170, R171, R172,
R173, R174, R213, R214, R215
10 4 121-6005-00 (101-0001849) R198, R200, R203, R205 Resistor SM 0805 Film 22KW 1/10W 5%
11 5 121-6023-00 (101-0001889) R45, R86, R88, R121, R122 Resistor SM 0805 3.3KW 1/10W 5%
12 3 121-6024-00 (101-0002009) R69, R129, R130 Resistor SM 0805 33W 1/10W 5%
13 2 121-6006-00 (101-0002012) R54, R93 Resistor SM 0805 Film 330W 1/10W 5%
14 24 121-6013-00 (101-0002035) R35, R36, R39, R40, R41, R42, R43, R44, R46, Resistor SM 0805 Film 39KW 1/10W 5%
R47, R48, R49, R50, R51, R52, R53, R183, R184,
R185, R186, R187, R188, R189, R190
15 2 121-6008-00 (101-0002046) R17, R19 Resistor SM 0805 Film 4.7KW 1/10W 5%
16 4 121-6014-00 (101-0002065) R219, R220, R221, R222 Resistor SM 0805 Film 47W 1/10W 5%
17 3 121-6025-00 (101-0002067) R199, R204, R216 Resistor SM 0805 470W 1/10W 5%
18 1 121-6015-00 (101-0002071) R209 Resistor SM 0805 Film 47KW 1/10W 5%
19 99 125-6001-00 (121-0000056) C25, C26, C27, C29, C31, C33, C37, C39, C40, Capacitor SM 0805 Cer. .1UF 50V 10% X7R
C41, C42, C43, C44, C45, C46, C47, C48, C51, C52, C54, C62, C64, C65, C67, C68, C69, C71,
C75, C77, C78, C79, C80, C81, C82, C83, C89, C90, C91, C92, C103, C104, C105, C121, C123,
C168, C169, C171, C174, C175, C176, C177, C182, C184, C185, C186, C187, C188, C189, C190,
C191, C192, C193, C202, C203, C204, C205, C206, C207, C208, C209, C210, C211, C212, C213,
C214, C219, C220, C222, C223, C224, C227, C230, C231, C232, C235, C238, C239, C240, C241,
C243, C244, C248, C250, C251, C252, C253, C254, C257, C258
20 3 125-6013-00 (121-0000077) C28, C57, C60 Capacitor SM 0805 Cer. 1UF 10V 10% X7R
21 1 125-6014-00 (121-0000086) C97 Capacitor SM 0805 Cer. 3300PF 50V 5% X7R
22 7 125-6002-00 (121-0000096) C259, C260, C261, C262, C263, C264, C265 Capacitor SM 0805 Cer. 470PF 50V 5% NPO
Rev. G as Mods on back of PCB, Rev. H in place (FCC Caps Plasma Ribbon Cable)
23 3 125-6015-00 (121-0000269) C102, C228, C236 Capacitor SM Case D Tant 22UF 25V 20%
24 11 125-6003-00 (121-0004236) C1, C2, C3, C4, C5, C6, C7, C8, C110, C161, C167 Capacitor SM 0805 Cer. .01UF 50V 10% X7R
25 49 125-6016-00 (121-0004245) C9, C10, C11, C12, C13, C14, C15, C16, C17, Capacitor SM 0805 Cer. 47PF 50V 5% NPO
C18, C19, C20, C21, C22, C23, C24, C49, C50, C53, C55, C56, C61, C63, C70, C74, C106, C116,
C117, C118, C119, C120, C122, C124, C125, C126, C127, C145, C146, C147, C148, C149, C194,
C195, C196, C197, C198, C199, C200, C201
26 4 125-6017-00 (121-0005317) C95, C100, C107, C256 Capacitor SM Case A Tant 2.2UF 16V 10%
27 6 125-6004-00 (121-0005318) C30, C34, C35, C36, C38, C66 Capacitor SM 0805 Cer. 22PF 100V 5% NPO
28 2 125-6005-00 (121-0006113) C178, C221 Capacitor SM 1206 Cer. 4.7PF 16V 20% Y5V
29 2 125-6006-00 (121-0007394) C159, C163 Capacitor SM 603 Cer. 1500PF 25V 10% X7R
30 10 125-6007-00 (121-0007853) C58, C59, C72, C76, C94, C165, C166, C170, Capacitor SM Case C Tant 10UF 16V 20%
C225, C233
31 1 125-6018-00 (121-0010097) C98 Cap. SM 805 Cer. .033UF 50V +80/-20% Y5V
32 4 125-6009-00 (121-0010493) C32, C73, C160, C162 Capacitor SM 805 Cer. 680PF 50V 5% NPO
33 6 125-6019-00 (134-0005415) C172, C173, C226, C229, C234, C237 Capacitor Tht. Radial Alum. 100UF 35V 20%
34 3 125-6020-00 (134-0007336) C93, C247, C249 Capacitor Tht. Radial Alum. 47UF 35V 20%
35 1 125-6010-00 (139-0006487) C255 Capacitor Tht. .22UF 5.5V, Gold, SD, Vert
36 6 125-6011-00 (161-0004959) L4, L5, L6, L7, L8, L9 Ind.-SM Ferrite100W 1234 Smt.
37 2 125-6012-00 (161-0007286) L1, L2 Ind.-SM 805 Bead 600W 100Mhz 25% 500mA
38 1 125-6021-00 (161-0009686) L3 Ind.-SM EP Inductor15uH 1100mA 20%
39 20 112-6000-00 (181-0004347) D1, D2, D3, D4, D5, D7, D8, D9, D11, D12, D13, Diode SM MiniMELFDL/LL4148 100V 500mW
D14, D15, D16, D17, D18, D24, D25, D26, D28
40 5 112-6001-00 (181-0004478) D10, D19, D20, D21, D22 Diode SM MELF DL4004 400V 1.0A
41 1 110-6000-00 (201-0006808) Q10 Fet-SM SOT-23 MMBF170 N-Chnnl. Fet
42 9 110-0069-00 (213-0003546) Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 Transistor Tht. TO-92 2N3904 NPN 40V 0.2A
43 1 124-6000-00 (213-0005687) U34 Trans. Tht. TO-220 LT1086 3.3V 1.5A Volt Reg.
44 8 100-6004-00 (221-0001000) U2, U4, U5, U14, U25, U26, U36, U41 I.C.-SM SO 74LVC245 Oct. Bus Xcvr.
45 1 100-5048-00 (221-0003716) U55 I.C.-SM SOIC 74HCT245DW Octal Line Xvr. W/3S
46 4 100-6005-00 (221-0003718) U15, U22, U35, U40 I.C.-SM SO LM339 Quad Diff. Comparator
47 1 100-6006-00 (221-0005249) U43 I.C.-SM SOIC DS1302 Time Keeper
48 1 100-6008-00 (221-0006578) U52 I.C.-SM SOIC SP232A SO-16
49 1 100-6009-00 (221-0006914) U32 I.C.-SM SOT-223 DS1233A2-15 Reset
50 1 100-6007-00 (221-0006919) U30 I.C.-SM OPA2353 Dual CMOS O/A MSOP-8
51 1 100-6018-00 (221-0006940) U48 I.C.-SM SOJ IDT71V016SA15Y SOJ-44
52A 1 100-6016-00 (221-0007056) U7 (must be programmed) XC95144XL program for U7 (I.C.-SM TQFP CPLD 144 Macro Cell 3.3V)
52B 1 100-6017-00 (221-0007056) U42 (must be programmed) XC95144XL program for U42 (I.C.-SM TQFP CPLD 144 Mac. Cell 3.3V)
53 1 124-6001-00 (221-0007298) U3 I.C.-SM SOIC LT1503CS8-1.8
54 1 100-6012-00 (221-0010735) U11 I.C.-SM SOIC CY62128 SRAM 128Kx8 3V LP SO32
55 1 100-6013-00 (221-0010736) U49 I.C.-SM QFP-L AT43 USB380 Processor USB 2.0
56 1 100-6014-00 (221-0010738) U16 I.C.-SM SSOP PCM1755 24-Bit Audio DAC 16-PI
57 1 100-6010-00 (221-0010978) U13 BOOT FLASH I.C.-SM SOJ IDT71V416S15Y SOJ-44
58 1 100-6011-00 (221-0010981) U44 LOCATION U9 I.C.-SM TSOP S29GL256N11 256MB Flash
59 1 100-6015-00 (221-0011102) U1 8MB EPROM I.C.-SM SOIC 74LV273 SOIC-20
60 1 124-6002-00 (225-0003581) U54 I.C.-Tht. TO-220 LM317T Adjustable Volt Reg.
61 2 100-5016-20 (225-0003635) U50, U51 960-5016-00 : I.C.-Tht. Pentawat TDA2030 18W Amplifier
62 1 124-6003-00 (225-0006921) U33 (No File, Unprogrammed) I.C.-Tht. TO-220 LM340T 5V 1A Volt Regulator
63 1 077-5217-00 (301-0004285) SU9 Socket DIP/SIP 32-Pin, Tin, .6, Dip
64 2 n/a (303-0005944) TP1, TP2 965-BOOT-SAM: Test Pt. All Test Point, White, Miniature
65 1 045- (315-0003511) JP1 (Latest Version Programmed) Con.-Tht. Header 2 Pin, 1 Row, VT, Tin, .1"
66 1 045- (315-0004097) J11 Con.-Tht. Header 6 Pin, 1 Row, VT, Tin, .156"
67 1 045- (315-0004121) J1 Con.-Tht. Header 9 Pin, 1 Row, VT, Tin, .156"
68 4 045- (315-0004122) J3, J6, J12, J13 Con.-Tht. Hdr. 10 Pin, 1 Row, VT, Tin, .156"
69 1 045- (315-0004124) J8 Con.-Tht. Header 6 Pin, 1 Row, VT, Tin, .1"
70 1 045- (315-0006776) J14 Con.-Tht. Hdr. 6 Pos. Phone Jack, Vertical
71 1 045- (315-0006910) J9 Con.-Tht. Header 20 Pin, 2 Row, VT, Tin, .1"
72 1 045- (315-0009252) J10 Con.-Tht. Header 4 Pin, 1 Row, VT, Tin, .156"
73 1 045- (315-0009520) J2 Con.-Tht. Hdr. 12 Pin, 1 Row, VT, Tin, .156"
74 1 045- (315-0009626) J15 Con.-Tht. 4 Pos. USB Recpt, VT, WHT/BLK
75 1 045- (315-0009627) J4 Con.-Tht. D-Sub 9 Pos, VT, w/lock & Hex Sc.
76 1 045- (315-0010979) J5 Con.-Tht. Hdr. 14 Pin, 2 Row, VT, Gold, .1" Shrou.
Sec. 5: PCBs

77 1 140-6000-00 (401-0007295) Y2 XTAL.-SM 32.768MHz Cl 12.5 FSR327

78 1 140-6001-00 (401-0010737) Y3 XTAL.-SM 600MHz 20PF
79 1 140-6002-00 (403-0005489) Y1 Osc.-SM SO 400MHz 5V Tristate CMOS
80 1 515- (421-0010979) B1 Battery (Coin Cell 24.5mm) Holder with clip
81 1 000-0644-01 (421-0010980) for B1 Coin Cell 3V 265maH 24X3 mm (CR2430)
82 1 165-6003-00 (425-0005320) LED1 LED SM Green 0805 LED
83 1 165-6004-00 (425-0010803) LED3 LED SM Dual Red/Green 1210 Top
84 1 182-5002-00 (450-0004750) SW1 8-Position Dip Switch
Spst. 16 Pin X8 Slide 5VDC 100ma
85 1 182-5001-00 (450-0004752) S1 White Push-Button Reset Switch
Spst. 4 Pin Momentary 24VDC 50ma
86 2 127-5001-00 (461-0003520) for U33, U34 Heatsink All Vert Mount Ba TO-220
87 2 127-5001-01 (461-0003528) for U50, U51 Heatsink All Vert Mount Ba TO-220
88 4 237-5909-01 (504-0004604) for Heat Sinks U33, U34, U50, U51 #4-40 X 3/8" PPH MS Sems (Zinc) Screw
89 4 240-5318-00 (503-0004457) for Heat Sinks U33, U34, U50, U51 #4-40 Keps Nut
90 4 254-5007-05 (507-0004547) for Mntg. Holes (Mfg. .169" I.D. X 9/32" O.D. X 5/16") 5/16" Slf. Rtn. Spacer White

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 127
 Display
S e c tPower
i o n Supply
5 PCB (520-5138-00) Schematic 1 CN2
8PKK156C
-120V

2 CN2 -100V
8PKK156C
3 KEY

4 CN2 GND
C7 8PKK156C
5 CN2 GND
0.1 uF 8PKK156C
R1 500V GND +5V
Q3
GND 6 CN2 +5V
8PKK156C
130 W
5W
D3 R4 MJE15030
+12V 7 CN2 +12V
1N5228 8PKK156C
D1 3.9V 1.5K W
1N4004 + 1/2W 8 CN2 +60V
C1 .. Q1 Q5 8PKK156C
220 uF MPSA92 C3
200V 0.1 uF R6
88V AC CN1 1 R2 D5 330K W R8 MJE15030
47K W 500V
1N4760A 1/2W 2K W
7PKK156E 1W 68V 5W
110V AC CN1 2
7PKK156E F1
XFRMR CN1 3 D6 R10
_GND R3 1N4764A C4 R7 GND 1.5K W
7PKK156E 0.75A 47K W 100V 0.1 uF 330K W 1/2W
S.B. 1W 500V
GND CN1 4 GND 1/2W
7PKK156E + C2
.. Q2
GND 220 uF D7
KEY 5 200V MPSA42
1N4743
13V
D2 D4 R5
+20V CN1 6 +20V
1N4004 1N5228 .. Q4
7PKK156E 3.9V MJE15031
1.5K W
+5V CN1 7 +5V 1/2W
7PKK156E

Display Power Supply PCB (520-5138-00) Component Layout & Parts

®
Actual Board Size 5” X 3.3”

ITEM QTY PART NUMBER REF-DESIGNATOR DESCRIPTION (NS = Not Stuffed)

— 1 520-5138-00 Display Power Supply PCB (includes Items 1-2 + 4-24)
1 2 125-5044-00 C1, C2 220uF, 200v, Radial Lytic Cap.
2 3 125-5035-00 C3, C4, C7 0.1uF, 500v, Ceramic Disk Cap.
3 0 125-5003-00 (C5, C6: NS) 22uF, 35v, Rad Lytic Cap
4 1 045-5015-07 CN1 7PKK156E (PIN5=KEY)
5 1 045-5015-08 CN2 8PKK156 (PIN3=KEY)
6 2 112-5003-00 D1, D2 1N4004, Diode
7 2 112-0053-00 D3, D4 1N5228, 3.9v, Diode
8 1 112-0062-00 D5 1N4760A, 68v, Diode
9 1 112-0049-00A D6 1N4764A, 100v, Diode
10 1 112-0061-00 D7 1N4743, 13v, Diode
11 1 200-5000-17 F1 3/4A (0.75A) S.B. Fuse
Sec. 5: PCBs

12 2 205-0004-00 F1 Fuse Clip

13 1 110-0100-00 Q1 MPSA92, Transistor
14 1 110-0082-00 Q2 MPSA42, Transistor
15 2 110-0101-00 Q3, Q5 MJE15030, Transistor
16 2 535-5000-11 Q3, Q4 Heatsinks - AAVID #563002
17 2 240-5008-00 Q3, Q4 #6-32 KEPS Nut
18 2 237-5501-00 Q3, Q4 #6-32 X 3/8" PPH Screw
19 1 110-0103-00 Q4 MJE15031, Transistor
20 1 121-5061-00 R1 130 W Resistor SMT, 5W
21 2 121-5060-00 R2, R3 47K W Resistor SMT, 1W
22 3 121-5038-00 R4, R5, R10 1.5K W Resistor SMT, 1/2W (R9: NS)
23 2 121-5059-00 R6, R7 330K W Resistor SMT, 1/2W
24 1 121-5062-00 R8 2K W Resistor SMT, 5W
25 0 124-5003-00 (VR1: NS) 7812CT

Section 5, Chapter 4 Printed Circuit

Page 128 Boards (PCBs)
OPTO Interrupter (520-5251-00) Schematic & Wiring
(for OPTO Switch 64) U-Shaped OPTO
Located on the Swordsman Assembly
Sw. 64, Swordsman Forward

OPTO Interrupter (520-5251-00) Component Layout & Parts

WHT (to TAN-WHT)
GRN (to GRN-YEL)

RED SW. 64
BLACK

BLACK
WHT (to TAN-WHT)

GRN (to GRN-YEL)

RED
Connector Side OPTO Side

S
+ +
E

Sec. 5: PCBs

ITEM QTY. SPI PART NR. (MFG. P.N.) REF-DESIGNATOR DESCRIPTION (SMT = Surface Mount)
— 1 520-5251-00 Ref. Only 237-0350 OPTO "U" Interuptor PCB Complete PCB Assembly (Rev. C)
1 1 (REV C) R1 Resistor, 150 W
2 1 R2 Resistor, 22K W
3 1 R3 Resistor, 33 W
4 1 Q1 Transistor, BSS123
5 1 D1 Diode, 1N4148
6 1 112-6003-00 225-0007940 OPTO 1 OPTO, Slotted QVE11233
7 1 045-5002-04 (055-5022-06) GND, RTN, STR, +5V Conn., 4-Pin Molex (Male Lugs required)
If a part is required where a part number is not provided, call Technical Support (see back of cover).

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 129
 Playfield Switches OPTO Transceiver PCBs (500-6775-0 1 ) Schematic

Mini PCB Front Back

Pin-2 A OPTO 15" Lead
White Stripe (Black Bracket)
Pin-1 K 500-6775-01 A
Playfield Switches OPTO Transceiver PCBs (500-6775 -01 )
Component Layout & Parts

ITEM QTY PART NUMBER REF-DESIGNATOR DESCRIPTION

A, B & D 2 pair 500-6775-01 Mini OPTO Transceiver PCB Assembly (Items A PCB + B + C)
A 1 520-5237-00 Mini OPTO Transceiver PCB (includes Items A-1 – A-3)
A-1 1 545-6092-00 Black Bracket (Plastic) Holder
A-2 1 237-5909-00 #4-40 X 1/4 PPH Screw
A-3 1 165-5052-00 LED (Ultra Bright Red)
B 1 601-5023-15 K, A 15" Speaker Wire (1-Side White Stripe)
D 1 045-5020-02 Note White Strip to Pin-1 2-Pin Cn., .100 KK Cmp Trm Molex 08-50-0113

Playfield OPTO Transmitter / Receiver Amplifier PCB (520-5239-01) Schematic

Sec. 5: PCBs

Section 5, Chapter 4 Printed Circuit

Page 130 Boards (PCBs)
Playfield OPTO Transmitter/Receiver Amplifier PCB (520-5239-01-ASY) Component Layout & Parts
(for OPTO Switches 39 & 40)

Front

Back
Front

J1

J2
J1
J1

J2
J2

J3
J3

J4
J4
J4

J5

J3
J5
J5

ITEM QTY PART NUMBER REF-DESIGNATOR DESCRIPTION (SMT = Surface Mount)

— 1 520-5239-01-ASY OPTO Transmitter/Receiver Amplifier PCB (incl. Items 1–14 + Item 15 spacers)
1 1 R7 Resistor SMT 805, 150K W 1/10W 5%
2 2 R5, R6 Resistor SMT 805, 180 W 1/10W 5%
3 1 R9 Resistor SMT 805, 180K W 1/10W 5%
4 4 If a part is required R1, R3, R12, R13 Resistor SMT 805, 1K W 1/10W 5%
5 2 where a part number R10, R11 Resistor SMT 805, 1M W 1/10W 5%
6 2 is not provided, call R2, R4 Resistor SMT 805, 470 W 1/10W 5%
7 1 Technical Support R8 SResistor SMT 805, 6.8K W 1/10W 5%
8 3 (see back of cover). C1, C2, C3 Cap.-SMT Cer. .1uF 50v 10% X7R
9 2 D1, D2 Diode, 1N4148W, 100v, 350MW
10 2 Q1, Q2 Transistor, MMST3904, NPN, 40v, .02A
11 1 U1 LM339M, Low Power Offset QUA
12 4 Mfg. 22-23-2021 J1, J2, J3, J4 Conn. 2-Pin, 0.1 Header (1 Row, VT, Tin)
13 1 Mfg. 640445-5 J5 Conn. 5-Pin, .156 Header (1 Row, VT, Tin)
14 2 Mfg. APT3216SURC L1, L2 LEDD-SMT, Red 1206
15 4 254-5007-02 corners Spacer, 1/4" Slf. Rtn. (.153" ID X 9/32" OD X 3/8")

Playfield OPTO Transmitter/Receiver Amplifier PCB (520-5239-01) Wiring (General)

(OPTO Switches 39 & 40)

Bs
PC
er itch)
TRANSCEIVER
e i v w
nsc er S 1
Tra ty. 2 p 775-0 2-conductor cable SILVER Anode
Q
( 500 - 6
COPPER Cathode
SWITCH 39 SILVER Anode
COPPER Cathode
2-conductor cable
2
1
2
1

TRANSCEIVER ARK ENTER (OPTO)

J2

J1
RECEIVER 1

TRANSMITTER 1

[ REAR ]
Switch Matrix
Bs WHT-VIO Return to CPU PCB J6-P2
Part of Playfield Cable

PC
er itch)
TRANSCEIVER 1
e i v w WHT-GRY Return to CPU PCB J6-P1
nsc er S 1 2
Tra ty. 2 p 775-0
6 2-conductor cable SILVER Anode
1
J3 GRN-ORG Drive to CPU PCB J1-P4
Q
( 500 -
COPPER Cathode 3
2
TRANSMITTER 2 BLK Ground
4
SWITCH 40 RED +5V DC to I/O PCB J16-P8
Sec. 5: PCBs

SILVER Anode J4 5
1
COPPER Cathode RECEIVER 2
J5
2-conductor cable 2

TRANSCEIVER HIT ARK (OPTO) OPTO Amplifier Board

520-5239-01
[ FRONT ]

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 131
 Lamp (X20 #555 Wedge Base Bulbs) PCB (520-5287-00) Schematic
9 49
1 11
10 50
2 12
11 51
3 13
14 52
4 14
16 53
5 15

35 66
6 16
36 67
7 17
37 68
8 18
38 69
9 19
39 72
10 20

J2 J1

49 35
11 6

50 36
66 12 7 9
16 1

51 37
13 8
67 10
17 2

52 38
14 9
68 11
18 3

53 39
15 10
69 14
Sec. 5: PCBs

19 4

72 16
20 5
CONNECTOR SIDE
(CONNECTORS NOT SHOWN)

Section 5, Chapter 4 Printed Circuit

Page 132 Boards (PCBs)
Lamp (X20 #555 Wedge Base Bulbs) PCB (520-5287-00) Wiring
CONN. J2 (KEY P8, N/U P7): CONN. J1 (KEY P7, N/U P14):
PIN 01, LMP11 – LMP15 (GND I/O RED-VIO J12-P8) PIN 01, LMP1 – LMP5 (GND I/O RED-BLK J12-P2)
PIN 02, LMP11 = 49 (Lamp Matrix) YEL-BRN J13-P9 PIN 02, LMP01 = 09 (Lamp Matrix) YEL-BRN J13-P9
PIN 03, LMP12 = 50 (Lamp Matrix) YEL-RED J13-P8 PIN 03, LMP02 = 10 (Lamp Matrix) YEL-RED J13-P8
PIN 04, LMP13 = 51 (Lamp Matrix) YEL-ORG J13-P7 PIN 04, LMP03 = 11 (Lamp Matrix) YEL-ORG J13-P7
PIN 05, LMP14 = 52 (Lamp Matrix) YEL-BLK J13-P6 PIN 05, LMP04 = 14 (Lamp Matrix) YEL-BLU J13-P4
PIN 06, LMP15 = 53 (Lamp Matrix) YEL-GRN J13-P5 PIN 06, LMP05 = 16 (Lamp Matrix) YEL-GRY J13-P1
PIN 09, LMP16 – LMP20 (GND I/O RED-WHT J12-P10) PIN 08, LMP6 – LMP10 (GND I/O RED-GRN J12-P5)
PIN 10, LMP16 = 66 (Lamp Matrix) YEL-RED J13-P8 PIN 09, LMP06 = 35 (Lamp Matrix) YEL-ORG J13-P7
PIN 11, LMP17 = 67 (Lamp Matrix) YEL-ORG J13-P7 PIN 10, LMP07 = 36 (Lamp Matrix) YEL-BLK J13-P6
PIN 12, LMP18 = 68 (Lamp Matrix) YEL-BLK J13-P6 PIN 11, LMP08 = 37 (Lamp Matrix) YEL-GRN J13-P5
PIN 13, LMP19 = 69 (Lamp Matrix) YEL-GRN J13-P5 PIN 12, LMP09 = 38 (Lamp Matrix) YEL-BLU J13-P4
PIN 14, LMP20 = 72 (Lamp Matrix) YEL-GRY J13-P1 PIN 13, LMP10 = 39 (Lamp Matrix) YEL-VIO J13-P3

J2 J1

49 35
11 6

50 36
66 12 7 9
16 1

51 37
13 8

67 10
17 2

52 38
14 9
68 11
18 3

53 39
15 10
69 14
19 4
Sec. 5: PCBs

72 16
20 5

For Lamp (X20 #555) PCB Component Layout & Parts, see opposite pages.

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 133
 Lamp (X20 #555 Wedge Base Bulbs) PCB (520-5287-00) Component Layout & Parts

J1 J2
Lamp Matrix Lamp Matrix
35 49
PCB LMP6 PCB LMP11

Lamp Matrix Lamp Matrix

Lamp Matrix Lamp Matrix
36 50
9 PCB LMP7 PCB LMP12 66
PCB LMP1 PCB LMP16

Lamp Matrix Lamp Matrix

37 51
Lamp Matrix PCB LMP8 Lamp Matrix
PCB LMP13
10 67
PCB LMP2 PCB LMP17
Lamp Matrix Lamp Matrix
38 52
Lamp Matrix Lamp Matrix
PCB LMP9 PCB LMP14
11 68
PCB LMP3 PCB LMP18

Lamp Matrix Lamp Matrix

Lamp Matrix 39 53 Lamp Matrix

PCB LMP10 PCB LMP15
14 69
PCB LMP4 PCB LMP19

Lamp Matrix Lamp Matrix

16 72
PCB LMP5 PCB LMP20

COMPONENT SIDE
(SOCKETS & DIODES / BULBS NOT SHOWN or INCLUDED)
Sec. 5: PCBs

ITEM QTY. SPI PART NR. (MFG. P.N.) REF-DESIGNATOR DESCRIPTION (SMT = Surface Mount)
— 1 520-5287-00 Lamp (X20 #555 Wedge Base) PCB PCB Assembly (may include spacers)
(Will Not Include Bulbs!)
1 20 112-5003-00 D1–D20 Diode, 1N4001
2 20 077-5207-01 LMP1–LMP20 Wedge Base Socket, Vertical Solder
Ref. 5 254-5007-06 n/a 1" Slf. Rtn. Plastic Spacer White
Not Included :
Ref. 20 165-5002-00 LMP1–LMP20 #555 Wedge Base Bulb (Clear)
Ref. 5 232-5007-00 n/a (securing hardware) #6 X 1-1/2" PPH (Zinc)
If a part is required where a part number is not provided, call Technical Support (see back of cover).

Section 5, Chapter 4 Printed Circuit

Page 134 Boards (PCBs)
Auxiliary®(3X®Transistor)®Driver®PCB®(in®Backbox)®with®the®Coin/Ticket®Meter
and®Ticket®Dispenser®Wiring®Diagram

Cabinet Bottom
® DATA Cable
BETA brite Electronic Color Message Display ®
BETA brite Power Cable Power
Supply
Plugs into Service Outlet
provided in the bottom of all
I/O POWER DRIVER & TO CPU/SOUND PCB domestic SPI Pinball Games
AUX. DRIVER PCBs IN BACKBOX
IN BACKBOX (LEFT SIDE) (RIGHT SIDE) J14

N/C
10
9
Conn. 8
to I/O 7
ORG-BLU (DATA 5) TO FLASH X2 LED PCBs (4 EA.) ABOVE
Power 6
ORG-GRN (DATA 4) THE PLAYFIELD (AUXILLARY OUTPUTS)
Driver 5
ORG-YEL (DATA 3) SEE PAGES 136-137 FOR SCHEMATIC,
PCB KEY WIRING AND COMPONENT LAYOUT.
4
J2 3
ORG-BLK (DATA 2)
ORG-RED (DATA 1)
2
ORG-BRN (DATA 0)
1

PNK-WHT (STROBE)
12
11
10
Conn. 9 NC 1
to I/O 8 NC 2 1 NC
Power 7 J16 KEY
I/O PCB KEY 3 Auxiliary 2 AUX 1: TICKET ADVANCE
Driver 6
+5VDC 1 RED 4 3 WHT ( ENABLE ) WHITE
6-PIN CONN.

PCB 5 Driver BRN AUX 2: TICKET METER

6 NC 5 4
J3 4 3 ORG-RED 6 PC Board 5 NC ( XXXXXX ) BROWN
3 2 ORG-BRN 7 520-5068-01 6 BLK
2 4 ORG-BLK 8 7 BLK-WHT AUX 3: SWITCHED GROUND
1 PNK-WHT ( XXXXXX ) BLK-WHT
5 9
J1 J2
Ticket Meter
IN CABINET
RED 1 1 RED (LEFT SIDE
02008
BLK 2 2 BRN BY COIN DOOR)

12-PIN
J16 WHT
I/O PCB CONN.
J16 BLK 1 BLK
GND 1
J16-P3 I/O PCB RED 2 RED

LT. GRN-ORG
LT. GRN-ORG
I/O PCB +5VDC 2
GRY-RED 3 3 GRY
+12VDC
1K
LT. GRN-ORG
Coin Meter 5V PULL-UP
J16 (TIX. ENABLE)
LT. GRN-ORG
I/O PCB
RED 1 1 RED
+5VDC J13-P4
02008 NC 2 2 NC CPU/SND
BLK 3 3 VIO-GRY 1 2 3 4 5 DED. SW.
Q24
J7-P10 Terminal Strip TICKET
I/O PCB 500-6640-00 NOTCH
DEDICATED
IN CABINET SWITCH 19
Deltronics DL-1275 Circuit Board (RIGHT SIDE)
or compatible TO BACKBOX
Sec. 5: PCBs

1 BLU 1 1 LT. GRN-ORG Notch Return Signal

2 BLK 2 2 BLK-WHT Switched Ground
WHT 3 3 WHT Drive Signal (Tix. Enable)
3 RED GRY +12V DC
4 4
4
Ticket Dispenser

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 135
X LED (X2 Flash) PCB (520-5289-00) Schematic
(for Auxiliary Flashers (LEDs) #36, #37 & #38)

LED (X2 Flash) PCB (520-5289-00) Component Layout & Parts

Connector/Component Side LED FLASH X2 Side

ITEM QTY. SPI PART NR. (MFG. P.N.) REF-DESIGNATOR DESCRIPTION (SMT = Surface Mount)
Sec. 5: PCBs

— 4 520-5289-00 LED (X2 Flash) PCB Complete PCB Assembly (may include spacers)
1 3 R1, R3, R8 Resistor, 1K W
2 1 R2 Resistor, 10K W
3 4 R4, R5, R6, R7 Resistor, 4.7 W
4 1 R9 Resistor, 0 W
5 2 Q1, Q2 Transistor, MMBT2222A
6 2 D1, D2 Super Bright LED, LXCL-PWF3
7 1 U1 IC, LM317
8 1 C1 Capacitor 47uF 35V
9 1 C2 Capacitor .1ufd
Ref. 2 254-5007-02 n/a 1/4" Slf. Rtn. Plastic Spacer White
If a part is required where a part number is not provided, call Technical Support (see back of cover).

Section 5, Chapter 4 Printed Circuit

Page 136 Boards (PCBs)
 LED (X2 Flash) PCB
LED (X2 Flash) PCB (520-5289-00) Wiring 520-5289-00
(for Auxiliary Flashers (LEDs) #36, #37 & #38)

ORG +18VDC 1
KEY 2
J6-P10 ORG-YEL DATA 3 3
I/O PCB BLK Ground
+18VDC 4
ORG
LOW POWER

J16-P10>16 ARK (Left)

I/O PCB
GND LED (X2 Flash) PCB
520-5289-00
AUX. OUT:
#36 FLASH:
ARK LEDS (X2)

ORG +18VDC 1
Ark Flash LED Cable KEY 2
036-5529-18-A4 ORG-YEL DATA 3 3
BLK Ground 4
ORG +18VDC 1 1 +18VDC ORG
KEY 2 2 KEY
NC 3 3 NC
DATA 3 DATA 3 ORG-YEL ARK (Right)
4 4
BLK Ground 5 5 Ground BLK
LED (X2 Flash) PCB
520-5289-00
AUX. OUT:
#37 FLASH:
Swordsman Flash LED Cable SWORDSMAN LEDS
036-5529-19-A4

ORG +18VDC 1 1 +18VDC ORG ORG +18VDC 1

KEY 2 2 KEY KEY 2
DATA 4 3 3 DATA 4 ORG-GRN ORG-GRN DATA 4 3
BLK Ground 4 4 Ground BLK BLK Ground 4

SWORDSMAN

I/O POWER DRIVER & LED (X2 Flash) PCB

AUX. DRIVER PCBs 520-5289-00
IN BACKBOX (LEFT SIDE) AUX. OUT:
#38 FLASH:
Skull Flash LED Cable SKULL LEDS
10 036-5529-20-A4
9
Conn. 8 ORG +18VDC 1 1 +18VDC ORG ORG +18VDC 1
to I/O 7
ORG-BLU (DATA 5) KEY KEY KEY
ORG-GRN (DATA 4) 2 2 2
Power 6 DATA 5 DATA 5 ORG-BLU ORG-BLU DATA 5
Driver ORG-YEL (DATA 3) 3 3 3
5 BLK Ground Ground BLK BLK Ground
PCB KEY 4 4 4
4
J2 3
ORG-BLK (DATA 2)
ORG-RED (DATA 1)
2
ORG-BRN (DATA 0) CRYSTAL SKULL
1

PNK-WHT (STROBE)
12
11
Sec. 5: PCBs

10
Conn. 9
to I/O 8
Power 7
Driver 6
PCB 5
J3 3
4
TO OPTIONAL AUX. DRIVER PCB
(AUXILLARY OUTPUTS)
2
SEE PAGE 135 WIRING DIAGRAM.
1

Printed Circuit Section 5, Chapter 4

Boards (PCBs) Page 137
 Auxiliary (3X Transistor) Driver PCB Schematic
NC

NC

KEY

RED

NC

ORG-RED

ORG-BRN

ORG-BLK

PNK-WHT
Auxiliary
Driver
Board
NC

KEY

WHT

RED

BLK

BLK

ORG
Auxiliary
Driver
Board

Auxiliary (3X Transistor) Driver PCB Component Layout

Sec. 5: PCBs

ITEM QTY PART NUMBER REF-DESIGNATOR DESCRIPTION

— 1 520-5068-01 Aux. / Solenoid Expander PCB (x3 Transistor) Complete PCB Assembly

Section 5, Chapter 4 Printed Circuit

Page 138 Boards (PCBs)
 $S SHQGL[
$SSHQGL[HV$WKUR XJK-
7DEOHRI&RQWHQWV
IRU$SSHQGL[HV
x$SSHQGL[$3LQEDOO*DPH)LUPZDUH7DEOH $$
X        *
Z        ' ? @??\^^^
_ ?`{__|}~{? €  {‚ƒ_@„†? €{‚
x$SSHQGL[%6HPL&RQGXFWRUV,&·V5HOD\V&URVV5HIHUHQFH7DEOH  %
Z   ? ?    ‡^  ‡„ˆ ‡ˆ{ ‡   @ 
      
x$SSHQGL[&3URGXFWLRQ6WDUW'DWH0DQXDO3DUW1ž5206L]H 3RVLWLRQVDQG-XPSHU:  &
X        *
Z ‰   ?  Š ‡?_  ‡  ?€‚‡?‹^? __`{__|}~
{? €  {‚ƒ_@„†? €{‚
x$SSHQGL['%RDUG7\SH7DEOH  ''
X        *
Z ‰  Œ_ **^Š ‰‡?‡Š __‡Š   Š _‡Š _? __‡
„? \  `{__|}~{? €  {‚ƒ_@„†?
€{‚**      !$ '* '
x$SSHQGL[(*HQHULF&RLO&URVV5HIHUHQFH*XLGH )OLSSHU&RLO7DEOH ((
X        *
Z ‰  _   ?{Ž„?    `{__|}~{? €  
{‚ƒ_@„†? €{‚
x$SSHQGL[)0RWRU6SHFLILFDWLRQ7DEOH ))
X        *
Z ‰ __  Œ? ?‡ `  ??  `{__|}~{? €  {‚ƒ
_@„†? €{‚
x$SSHQGL[*3DUW1XPEHU3UHIL[&ODVVLILFDWLRQ&RGHV  *
Z _ ?   ‰_  _   
x$SSHQGL[+3OD\ILHOG,QVHUWV 3ODVWLF/LJKW&RYHUV  +
Z  ‰  _‰   ?? `__  ?  << < 
x$SSHQGL[,6WDQG8S7DUJHWV 0RGXODU6WDQG8S7DUJHWV  ,,
Z  ‰  _‰   ??  `__  ?_ ?Ž„  << < 
x$SSHQGL[-&RLQ&DUGV 86$ ,QWHUQDWLRQDO  -
Z  ‰  _‰   ??  `__ ?  ?`‡?‡ˆ? 
^? ? ?_?  < '<'> < '<  '@  Z   \ ' '  

$SSHQGL[HV$²- $SSHQGL[HV$²-
7DEOHRI&RQWHQWV 7DEOHRI&RQWHQWV
 $33(1',;$
3LQEDOO*DPH)LUPZDUH :KLWH6WDU%RDUG6\VWHP 2QO\ 7DEOH
6HH ZHEVLWH IRU WKH ODWHVW ,QWHUQDWLRQDO &RGH RU 8SGDWHG 86$ YHUVLRQ  FKHFNVXPV
&KLS 3URJUDP 86$ '07 %G 5DZ &KLS 3URJUDP 86$ '07 %G 5DZ
520 6L]H 3DUW 1ž &KHFN 6XP /RF 3DUW 1ž 520 6L]H 3DUW 1ž &KHFN 6XP /RF 3DUW 1ž
†_^ ‰`€£'{‘ ‘K !_##!%
$?} ‘„}’ “”•\–œ„“\”†   ™š   “”–\•––“\––
>  ‘•„—ƒ’ “”•\–œ—–\”† {„––™šZ›ZZ <† “”–\†––„\–—
   ‘›}’ “”•\–œ—„\”†  ™š  Š‡Œ “”–\•–„•\–„
{ „ ‘˜}’ “”•\–œ——\”† {„––™š%—” <„† “”–\•–„”\––
{ — ‘˜}’ “”•\–œ—œ\”† {„––™š“œ“” <—„ “”–\•–„”\––
{ œ ‘˜}’ “”•\–œ—›\”† {„––™šZ@†— <œ” “”–\•–„”\––
{ › ‘›}’ “”•\–œ—•\”† {„––™š”„–– <œ† “”–\•–„•\–„

 ‘’ !{

  ^
:†_^ ‰`€£'{‘ ‘‘_ 0   _##__##%


ƒ '{ $?} ‘„}’ “”•\–œ„“\”†  ™š   “”–\•––“\––
$?} ‘„}’ “”•\–—–˜\––  ™š›  “”–\•––“\––    ‘›}’ “”•\–œ—„\”†   ™š; › Š‡Œ “”–\•–„•\–„
>  ‘•„—ƒ’ “”•\–—„—\–– {„––™š•—›› <† “”–\†––„\–—
:†_^ ‰`€£'{‘

<“K
   ‘›}’ “”•\–—„œ\––  ™š;›; Š‡Œ “”–\•–„•\–„ ‘‘ 0   _##{%
{ „ ‘›}’ “”•\–—–“\–– {„––™š†Z%† <„† =‘ _’ $?} ‘„}’ “”•\–œ„“\˜†  ™š  “”–\•––“\––
{ — ‘›}’ “”•\–—„–\–– {„––™š˜X•• <—„ =‘ _’    ‘›}’ “”•\–œ—„\˜†  ™š “”–\•–„•\–„
{ œ ‘›}’ “”•\–—„„\–– {„––™š–˜XX <œ” =‘ _’

‹€^'{ {__Ÿ{_~'{‘ 
$?} ‘„}’ “”•\–œ—”\”˜   ™š  “”–\•––“\––
$?} ‘„}’ “”•\–—„›\›—  ™š   “”–\•––“\–– >  ‘•„—ƒ’ “”•\–œ—†\”˜ {„––™šœ@% <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–—„†\›— {„––™š”„• <† “”–\†––„\–—    ‘›}’ “”•\–œ—˜\”˜   ™š› Š‡Œ “”–\•–„•\–„
   ‘›}’ “”•\–—„˜\›—  ™š‰ Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ—“\”˜ {„––™š›˜— <„† “”–\•–„”\––
{ „ ‘›}’ “”•\–—„•\›— {„––™šœXœ— <„† =‘ _’ { — ‘˜}’ “”•\–œœ–\”˜ {„––™š†œ„— <—„ “”–\•–„”\––
{ — ‘›}’ “”•\–—„”\›— {„––™š†„Z– <—„ =‘ _’ { œ ‘˜}’ “”•\–œœ„\”˜ {„––™šX—Z <œ” “”–\•–„”\––
{ › ‘˜}’ “”•\–œœ—\”˜ {„––™š%•–˜ <œ† “”–\•–„”\––
=œ{_'{
$?} ‘„}’ “”•\–—„“\›„   ™š›  “”–\•––“\–– '$'{‘ ^'<_`{   \< Z|_  Z}'
>  ‘•„—ƒ’ “”•\–——„\›„ {„––™š„ZZZ <† “”–\†––„\–— $?} ‘„}’ “”•\–œœ“\†œ  ™š‰  “”–\•––“\––
   ‘›}’ “”•\–———\›„  ™š‰ Š‡Œ “”–\•–„•\–„ >  ‘•„—ƒ’ “”•\–œ›–\†œ {„––™š <† “”–\†––„\–—
{ „ ‘›}’ “”•\–——–\›„ {„––™šœ”•– <„† “”–\•–„•\–„    ‘›}’ “”•\–œ›„\†œ  ™š  Š‡Œ “”–\•–„•\–„
{ — ‘›}’ “”•\–——œ\›„ {„––™š“œ–– <—„ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ›—\†œ {„––™š <„† “”–\•–„”\––
{ — ‘˜}’ “”•\–œ›œ\†œ {„––™š <—„ “”–\•–„”\––
&‰&€ƒ€‰^'{ { œ ‘˜}’ “”•\–œ››\†œ {„––™š <œ” “”–\•–„”\––
{ › ‘˜}’ “”•\–œ›•\†œ {„––™š <œ† “”–\•–„”\––
$?} ‘„}’ “”•\–——›\›•  ™š›  “”–\•––“\––
>  ‘•„—ƒ’ “”•\–——†\›• {„––™š———@ <† “”–\†––„\–—
   ‘›}’ “”•\–——˜\›•  ™š; Š‡Œ “”–\•–„•\–„ _^ {{'{‘ 
{ „ ‘›}’ “”•\–——•\›• {„––™šœX„ <„† “”–\•–„•\–„ $?} ‘„}’ “”•\–œœœ\†—  ™š›  “”–\•––“\––
{ — ‘›}’ “”•\–——”\›• {„––™š—–”X <—„ “”–\•–„•\–„ >  ‘•„—ƒ’ “”•\–œœ›\†— {„–„™š“†“” <† “”–\†––„\–—
   ‘›}’ “”•\–œœ•\†—  ™š Š‡Œ “”–\•–„•\–„
ƒž~'{ { „ ‘˜}’ “”•\–œœ”\†— {„––™š•˜X <„† “”–\•–„”\––
{ — ‘˜}’ “”•\–œœ†\†— {„––™š—†—@ <—„ “”–\•–„”\––
$?} ‘„}’ “”•\–——“\›œ  ™š  “”–\•––“\–– { œ ‘˜}’ “”•\–œœ˜\†— {„––™š›„X <œ” “”–\•–„”\––
>  ‘•„—ƒ’ “”•\–—œœ\›œ {„––™šZ„X† <† “”–\†––„\–—
   ‘›}’ “”•\–—œ›\›œ  ™š Š‡Œ “”–\•–„•\–„
{ „ ‘›}’ “”•\–—œ–\›œ {„––™š@˜ <„† “”–\•–„•\–„ †Š_'{‘ 
{ — ‘›}’ “”•\–—œ„\›œ {„––™šZ„ <—„ “”–\•–„•\–„ $?} ‘„}’ “”•\–œ›”\”•  ™š›  “”–\•––“\––
{ œ ‘›}’ “”•\–—œ—\›œ {„––™šZœ— <œ” “”–\•–„•\–„ >  ‘•„—ƒ’ “”•\–œ›†\”• {„––™š•˜„% <† “”–\†––„\–—
   ‘›}’ “”•\–œ›˜\”•  ™š ; Š‡Œ “”–\•–„•\–„
={_ˆ_=_^ ƒ€{  '{ { „ ‘˜}’ “”•\–œ›“\”• {„––™šX„— <„† “”–\•–„”\––
{ — ‘˜}’ “”•\–œ•–\”• {„––™šœ˜Z› <—„ “”–\•–„”\––
$?} ‘„}’ “”•\–—œ•\•”   ™š   “”–\•––“\–– { œ ‘˜}’ “”•\–œ•„\”• {„––™š„@•› <œ” “”–\•–„”\––
>  ‘•„—ƒ’ “”•\–—œ˜\•” {„––™š›† <† “”–\†––„\–— { › ‘˜}’ “”•\–œ•—\”• {„––™š†—– <œ† “”–\•–„”\––
   ‘›}’ “”•\–—œ“\•”  ™š Š‡Œ “”–\•–„•\–„
{ „ ‘›}’ “”•\–—œ”\•” {„––™šX””@ <„† “”–\•–„•\–„
{ — ‘›}’ “”•\–—œ†\•” {„––™š˜Z•› <—„ “”–\•–„•\–„ {œ_• '{‘ 
$?} ‘„}’ “”•\–œ•œ\†›  ™š ‰  “”–\•––“\––
=${ˆ_€ž__'{ >  ‘•„—ƒ’ “”•\–œ•›\†› {„––™š†@ <† “”–\†––„\–—
   ‘›}’ “”•\––œ•\†›  ™š  Š‡Œ “”–\•–„•\–„
$?} ‘„}’ “”•\–—›–\•œ  ™š  “”–\•––“\–– { „ ‘˜}’ “”•\–œ•”\†› {„––™š—@“ <„† “”–\•–„”\––
>  ‘•„—ƒ’ “”•\–—›œ\•œ {„––™šœ•@ <† “”–\†––„\–— { — ‘˜}’ “”•\–œ•†\†› {„––™š“X†• <—„ “”–\•–„”\––
   ‘›}’ “”•\–—››\•œ  ™š  Š‡Œ “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ•˜\†› {„––™š•„Zœ <œ” “”–\•–„”\––
{ „ ‘›}’ “”•\–—›„\•œ {„––™š„—† <„† “”–\•–„•\–„ { › ‘˜}’ “”•\–œ•“\†› {„––™š–X• <œ† “”–\•–„”\––
{ — ‘›}’ “”•\–—›—\•œ {„––™š˜› <—„ “”–\•–„•\–„

=Ÿ '{ Œ‡'‡‡$¤£'{‘ 

$?} ‘„}’ “”•\–œ”–\†•  ™š   “”–\•––“\––
$?} ‘„}’ “”•\–—›•\›”   ™š  “”–\•––“\–– >  ‘•„—ƒ’ “”•\–œ”„\†• {„––™š˜%„˜ <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–—›˜\›” {„––™š””›˜ <† “”–\†––„\–—    ‘›}’ “”•\–œ”—\†•  ™š  Š‡Œ “”–\•–„•\–„
   ‘›}’ “”•\–—›“\›”  ™š‰ Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ”œ\†• {„––™šœ•X” <„† “”–\•–„”\––
{ „ ‘›}’ “”•\–—›”\›” {„––™šœ›“ <„† “”–\•–„•\–„ { — ‘˜}’ “”•\–œ”›\†• {„––™š@œ• <—„ “”–\•–„”\––
{ — ‘›}’ “”•\–—›†\›” {„––™š”—“% <—„ “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ”•\†• {„––™š˜“Z <œ” “”–\•–„”\––
{_ƒ=_ƒ_'{  ^^'{‘ ‘ 
$?} ‘„}’ “”•\–—•–\•“  ™š   “”–\•––“\–– $?} ‘„}’ “”•\–œ”†\†”  ™š ‰  “”–\•––“\––
>  ‘•„—ƒ’ “”•\–—•œ\•“ {„––™š”›@— <† “”–\†––„\–— >  ‘•„—ƒ’ “”•\–œ”˜\†” {„–—™šX†%— <† “”–\†––„\–—
   ‘›}’ “”•\–—•›\•“  ™š ; Š‡Œ “”–\•–„•\–„    ‘›}’ “”•\–œ”“\†”  ™š  Š‡Œ “”–\•–„•\–„
{ „ ‘›}’ “”•\–—•„\•“ {„––™š„•— <„† “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ†–\†” {„––™š“@X <„† “”–\•–„”\––
{ — ‘›}’ “”•\–—•—\•“ {„––™š–—“„ <—„ “”–\•–„•\–„ { — ‘˜}’ “”•\–œ†„\†” {„––™š“Zœ› <—„ “”–\•–„”\––
{ œ ‘›}’ “”•\–—••\•“ {„––™š“•† <œ” “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ†—\†” {„––™šœ†›@ <œ” “”–\•–„”\––
{ › ‘˜}’ “”•\–œ†œ\†” {„––™š—œ† <œ† “”–\•–„”\––
ƒ_'{‰_` '{
$?} ‘„}’ “”•\–—””\œ•  ™š   “”–\•––“\–– Š_{_=^• '{‘ ‘ 
>  ‘•„—ƒ’ “”•\–—†„\œ• {„––™š›Z˜ <† “”–\†––„\–— >  ‘•„—ƒ’ “”•\–œ†›\†˜ {„––™šZ””œ <† “”–\†––„\–—
   ‘›}’ “”•\–—†—\œ•  ™š ‰ Š‡Œ “”–\•–„•\–„ $?} ‘„}’ “”•\–œ†•\†˜  ™š   “”–\•––“\––
{ „ ‘›}’ “”•\–—”†\œ• {„––™š˜–„˜ <„† “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ††\†˜ {„––™šœ%› <„† “”–\•–„”\––
{ — ‘›}’ “”•\–—”˜\œ• {„––™š—„•† <—„ “”–\•–„•\–„ { — ‘˜}’ “”•\–œ†˜\†˜ {„––™š–•† <—„ “”–\•–„”\––
{ œ ‘›}’ “”•\–—”“\œ• {„––™š@•” <œ” “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ†“\†˜ {„––™š–›† <œ” “”–\•–„”\––
{ › ‘›}’ “”•\–—†–\œ• {„––™š–„X <œ† “”–\•–„•\–„    ‘›}’ “”•\–œ†”\†˜  ™š‰‰;  %  
${&ƒ'{ =~ƒ• _{^'{‘ ‘ 
$?} ‘„}’ “”•\–—˜—\”–  ™š;  “”–\•––“\–– >  ‘•„—ƒ’ “”•\–œ˜„\†† {„–„™š†XX <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–—˜†\”– {„––™š”Z <† “”–\†––„\–— $?} ‘„}’ “”•\–œ˜—\††  ™š  “”–\•––“\––
   ‘›}’ “”•\–—˜˜\”–  ™š ; Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ˜œ\†† {„––™š“†„“ <„† “”–\•–„”\––
{ „ ‘›}’ “”•\–—˜œ\”– {„––™š›œ“„ <„† “”–\•–„•\–„ { — ‘˜}’ “”•\–œ˜›\†† {„––™š„”X <—„ “”–\•–„”\––
{ — ‘›}’ “”•\–—˜›\”– {„––™š˜—„• <—„ “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ˜•\†† {„––™š%X <œ” “”–\•–„”\––
{ œ ‘›}’ “”•\–—˜•\”– {„––™š•@œ— <œ” “”–\•–„•\–„ { › ‘˜}’ “”•\–œ˜”\†† {„––™šX†X• <œ† “”–\•–„”\––
{ › ‘›}’ “”•\–—˜”\”– {„––™š˜“†„ <œ† “”–\•–„•\–„    ‘›}’ “”•\–œ˜†\††  ™š %'%@ “”–\•–„•\–„
‹€¡'{ =_~{_£ Š¥{Œ• '{‘ ‘ 
$?} ‘„}’ “”•\–—˜“\›–   ™š;  “”–\•––“\–– >  ‘•„—ƒ’ “”•\–œ˜˜\†“ {„––™š—Z <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–—“›\›– {„––™š–%%˜ <† “”–\†––„\–— $?} ‘„}’ “”•\–œ˜“\†“  ™š  “”–\•––“\––
   ‘›}’ “”•\–—“•\›–  ™š›› Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ“–\†“ {„––™š„˜œ˜ <„† “”–\•–„”\––
{ „ ‘›}’ “”•\–—“–\›– {„––™š–†• <„† “”–\•–„•\–„ { — ‘˜}’ “”•\–œ“„\†“ {„––™šZ–• <—„ “”–\•–„”\––
{ — ‘›}’ “”•\–—“„\›– {„––™š%%%Z <—„ “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ“—\†“ {„––™š˜“ <œ” “”–\•–„”\––
{ œ ‘›}’ “”•\–—“—\›– {„––™š——†Z <œ” “”–\•–„•\–„ { › ‘˜}’ “”•\–œ“œ\†“ {„––™š„—–– <œ† “”–\•–„”\––
{ › ‘›}’ “”•\–—“œ\›– {„––™š@”“ <œ† “”–\•–„•\–„    ‘›}’ “”•\–œ“›\†“  ™š› %'%@ “”–\•–„•\–„
{_'{‘  =$_€¥{Š• '{ ‘
$?} ‘„}’ “”•\–œ–„\†„   ™š   “”–\•––“\–– >  ‘•„—ƒ’ “”•\–›–„\˜– {„–„™šœ”@% <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–œ–”\†„ {„––™š„—˜” <† “”–\†––„\–— $?} ‘„}’ “”•\–›–—\˜– ™š  “”–\•––“\––
   ‘›}’ “”•\–œ–†\†„  ™š Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–›–œ\˜– {„––™š„†“— <„† “”–\•–„”\––
{ „ ‘˜}’ “”•\–œ–—\†„ {„––™š†@Z˜ <„† “”–\•–„”\–– { — ‘˜}’ “”•\–›–›\˜– {„––™š”†Z„ <—„ “”–\•–„”\––
{ — ‘˜}’ “”•\–œ–œ\†„ {„––™š“%%% <—„ “”–\•–„”\–– { œ ‘˜}’ “”•\–›–•\˜– {„––™š˜“@” <œ” “”–\•–„”\––
{ œ ‘˜}’ “”•\–œ–›\†„ {„––™š“ <œ” “”–\•–„”\–– { › ‘˜}’ “”•\–›–”\˜– {„––™šX›“ <œ† “”–\•–„”\––
{ › ‘˜}’ “”•\–œ–•\†„ {„––™š””•“ <œ† “”–\•–„”\––    ‘›}’ “”•\–›–†\˜– ™š› %'%@ “”–\•–„•\–„
 *!”$ *J =; ;_

$SSHQGL[$ 3LQEDOO*DPH
 )LUPZDUH7DEOH
 $33(1',;$
3LQEDOO*DPH)LUPZDUH :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH
6HH ZHEVLWH IRU WKH ODWHVW ,QWHUQDWLRQDO &RGH RU 8SGDWHG 86$ YHUVLRQ  FKHFNVXPV
&KLS 3URJUDP 86$ '07 %G 5DZ
520 6L]H 3DUW 1ž &KHFN 6XP /RF 3DUW 1ž
Ripley’s Believe It or Not!® (Notes 7, 8) Spider-Man• Pinball (S-M) (Notes 7, 9)
Sound (512K) 965-0408-81 V1.00 | $D93D U7 960-7001-02 Boot B-02 (8M) 965-BOOT-SAM X2.10 | $F625 U9 960-5016-00
Game ROM (1M) 965-0409-81 A3.20 | $43FF U210 960-5009-00 unprogrammed
Voice 1 (8M) 965-0410-81 V1.00 | $067B U17 960-5016-00 Memory Stick 128MB (970-0128-00) Version System Bin Files:
Voice 2 (8M) 965-0411-81 V1.00 | $C8B8 U21 960-5016-00 English + Spanish 1.3ES 1.27+ spd_1_30_es.bin
Voice 3 (8M) 965-0412-81 V1.00 | $64C2 U36 960-5016-00 English + French 1.3EF 1.27+ spd_1_30_ef.bin
Voice 4 (8M) 965-0413-81 V1.00 | $5341 U37 960-5016-00 German+French 1.3GF 1.27+ spd_1_30_gf.bin
Display (4M) 965-0414-81 A3.00 | $DE4B U5 DC PCB 960-5015-01 English + Italian 1.3EI 1.27+ spd_1_30_ei.bin
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 25MB – 30MB+/–
Elvis® (Notes 7, 8)
Sound (512K) 965-0415-84 V1.00 | $8CD2 U7 960-7001-02
Game ROM (1M) 965-0416-84 A5.00 | $50FF U210 960-5009-00
Voice 1 (8M) 965-0417-84 V1.00 | $538D U17 960-5016-00
Voice 2 (8M) 965-0418-84 V1.00 | $8BCD U21 960-5016-00
Voice 3 (8M) 965-0419-84 V1.00 | $60F8 U36 960-5016-00
Voice 4 (8M) 965-0420-84 V1.00 | $14D8 U37 960-5016-00
Display (4M) 965-0421-84 A5.00 | $A1F6 U5 DC PCB 960-5015-01

The SopranosSM (Notes 7, 8).

Sound (512K) 965-0422-85 V4.00 | $9B5A U7 960-7001-02
Game ROM (1M) 965-0423-85 A5.00 | $5BFF U210 960-5009-00
Voice 1 (8M) 965-0424-85 V3.00 | $F01E U17 960-5016-00
Voice 2 (8M) 965-0425-85 V1.04 | $C14C U21 960-5016-00
Voice 3 (8M) 965-0426-85 V1.04 | $47A3 U36 960-5016-00
Voice 4 (8M) 965-0427-85 V1.04 | $ADCD U37 960-5016-00
Display (4M) 965-0428-85 A5.00 | $B4BB U5 DC PCB 960-5015-01

NASCAR® (Notes 7, 8)
Sound (512K) 965-0429-86 V2.00 | $32B3 U7 960-7001-02
Game ROM (1M) 965-0430-86 A4.50 | $39FF U210 960-5009-00
Voice 1 (8M) 965-0431-86 V2.00 | $CFFB U17 960-5016-00
Voice 2 (8M) 965-0432-86 V2.00 | $22C0 U21 960-5016-00
Voice 3 (8M) 965-0433-86 V2.00 | $5FC8 U36 960-5016-00
Voice 4 (8M) 965-0434-86 V2.00 | $2902 U37 960-5016-00
Display (4M) 965-0435-86 A4.00 | $92BD U5 DC PCB 960-5015-01

Grand Prix (Notes 7, 8)

Sound (512K) 965-0429-91 V1.00 | $6F89 U7 960-7001-02
Game ROM (1M) 965-0430-91 A4.50 | $5EFF U210 960-5009-00
Voice 1 (8M) 965-0431-91 V1.00 | $CE0E U17 960-5016-00
Voice 2 (8M) 965-0432-91 V1.00 | $F4C6 U21 960-5016-00
Voice 3 (8M) 965-0433-91 V1.00 | $057D U36 960-5016-00
Voice 4 (8M) 965-0434-91 V1.00 | $2646 U37 960-5016-00
Display (4M) 965-0435-91 A4.00 | $DA8E U5 DC PCB 960-5015-01

[NDSE] (Notes 7, 8) Call for more info if code update required.

Sound (512K) 965-0436-97 U7 960-7001-02
Game ROM (1M) 965-0437-97 U210 960-5009-00
Voice 1 (8M) 965-0438-97 U17 960-5016-00
Voice 2 (8M) 965-0439-97 U21 960-5016-00
Voice 3 (8M) 965-0440-97 U36 960-5016-00
Voice 4 (8M) 965-0441-97 U37 960-5016-00
Display (4M) 965-0442-97 U5 DC PCB 960-5015-01

** GAMES BELOW THIS LINE / NEXT COLUMN ARE S.A.M. SYSTEM GAMES

7225'(50(025<67,&.:,7+*$0(),/(6
)520<285',675,%872586(63,3$57
180%(5 ,1&/8'(7+(
*$0(1$0(/$1*8$*(),/( 6 '(6,5('

World Poker Tour• Pinball (WPT) (Notes 7, 9)

Boot B-02 (8M) 965-BOOT-SAM X1.04 | $7E62 U9 960-5016-00
unprogrammed
Memory Stick 128MB (970-0128-00) Version System Bin Files:
English + Spanish 1.12AL 1.17+ WPT0112AL.bin
English Only 1.12A 1.17+ WPT0112A.bin
English + French 1.12AF 1.17+ WPT0112AF.bin
French Only 1.12F 1.17+ WPT0112F.bin
German + French 1.12GF 1.17+ WPT0112GF.bin
German Only 1.12G 1.17+ WPT0112G.bin
English + Italian 1.12AI 1.17+ WPT0112AI.bin
Italian Only 1.12I 1.17+ WPT0112I.bin
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 25MB – 30MB+/–

The Simpsons• Kooky Carnival Redemption (Note 9)

Boot B-02 (8M) 965-BOOT-SAM X1.04 | $7E62 U9 960-5016-00
unprogrammed
Memory Stick 128MB (970-0128-00) Version Bin Files:
English Only 1.05 SKC0105.bin
English New Jersey Only 0.09NJ SKC0090NJ.bin
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 5.5MB +/–

©Disney’s Pirates of the Caribbean Pinball (POTC) (Notes 7, 9)

Boot B-02 (8M) 965-BOOT-SAM X1.06 | $2014 U9 960-5016-00
unprogrammed
Memory Stick 128MB (970-0128-00) Version System Bin Files:
English + Spanish 1.15AS 1.17+ POTC115AS.bin
English + French 1.15AF 1.17+ POTC115AF.bin
German + French 1.15GF 1.17+ POTC115GF.bin
English + Italian 1.15AI 1.17+ POTC115AI.bin
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 25MB – 30MB+/–

Family Guy• Pinball (FG) (Notes 7, 9)

Boot B-02 (8M) 965-BOOT-SAM X2.09 | $10A3 U9 960-5016-00
unprogrammed
Memory Stick 128MB (970-0128-00) Version System Bin Files:
English + Spanish 10.00AL 1.23+ FG1000AL.bin
English + French 10.00AF 1.23+ FG1000AF.bin footnotes:
English + German 10.00AG 1.23+ FG1000GF.bin
English + Italian 10.00AI 1.23+ FG1000AI.bin 1 ROMs on CPU/Sound Bd.: 520-5136-00 (Stereo) & Display Cont. Bd.: 520-5055-01
2 ROMs on CPU/Sound Bd.: 520-5136-10 (Mono) & Display Cont. Bd.: 520-5055-01
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 25MB – 30MB+/– 3 ROMs on CPU/Sound Board: 520-5136-15* (Mono) (*FCC 11-97) &
Display Controller Board: 520-5055-02* (*FCC 11-97)

3LQEDOO*DPH $SSHQGL[$
)LUPZDUH7DEOH 
 $33(1',;$
3LQEDOO*DPH)LUPZDUH7DEOH
&KLS 3URJUDP 86$ %G 5DZ &KLS 3URJUDP 86$ %G 5DZ
(3520 6L]H 3DUW 1ž 9HU /RF 3DUW 1ž (3520 6L]H 3DUW 1ž 9HU /RF 3DUW 1ž
Laser War Lethal Weapon 3
CPU (256K) 965-0004-00 LWAR.C5 C5 960-5007-00 CPU (512K) 965-0082-00 A2.08 C5 960-7001-02
Sound (Old) (256K) 965-0005-00 J5 960-5007-00 Voice 1 (2M) 965-0083-00 U17 960-5010-00
Sound (Old) (256K) 965-0006-00 J6 960-5007-00 Voice 2 (2M) 965-0084-00 U21 960-5010-00
Sound (Old) (256K) 965-0007-00 J7 960-5007-00 Sound (256K) 965-0085-00 U7 960-5007-00
Display (2M) 965-0086-00 A2.06 ROM 0 960-5010-00
- OR - Display (2M) 965-0087-00 A2.06 ROM 1 960-5010-00
Sound (256K) 965-0008-00 7F 960-5007-00 (Used on Display PCB 520-5055-00)
Sound 1 (512K) 965-0009-00 6F 960-7001-02
Sound 2 (512K) 965-0010-00 4F 960-7001-02 -OR-
Display (4M) 965-0087-04 A2.06 ROM 0 960-5015-00
Secret Service (Used on Display PCB 520-5055-01)
CPU (256K) 965-0011-00 A4-6 B5 960-5007-00
CPU (256K) 965-0012-00 A4-6 C5 960-5007-00 Star Wars
Voice 1 (512K) 965-0014-00 6F 960-7001-02 CPU (512K) 965-0119-00 A1.03 C5 960-7001-02
Voice 2 (512K) 965-0015-00 4F 960-7001-02 Voice 0 (4M) 965-0132-00 U17 960-5015-00
Sound (256K) 965-0013-00 7F 960-5007-00 Voice 1 (2M) 965-0133-00 U21 960-5010-00
Sound (256K) 965-0131-00 U7 960-5007-00
Torpedo Alley Display (2M) 965-0120-00 A1.04 ROM 0 960-5010-00
Display (2M) 965-0121-00 A1.04 ROM 1 960-5010-00
CPU (256K) 965-0016-00 A2-1 B5 960-5007-00 (Used on Display PCB 520-5055-00)
CPU (256K) 965-0017-00 A2-1 C5 960-5007-00
Voice 1 (512K) 965-0019-00 6F 960-7001-02 -OR-
Voice 2 (512K) 965-0020-00 4F 960-7001-02 Display (4M) 965-0122-00 A1.05 ROM 0 960-5015-00
Sound (256K) 965-0018-00 7F 960-5007-00 (Used on Display PCB 520-5055-01)

Time Machine Rocky & Bullwinkle & Friends

CPU (128K) 965-0021-00 A2-4 B5 960-5006-00 CPU (512K) 965-0138-00 A1.30 C5 960-7001-02
CPU (256K) 965-0022-00 A2-4 C5 960-5007-00 Voice 0 (4M) 965-0139-00 U17 960-5015-00
Voice 1 (512K) 965-0024-00 6F 960-7001-02 Voice 1 (2M) 965-0140-00 U21 960-5010-00
Voice 2 (512K) 965-0025-00 4F 960-7001-02 Sound (256K) 965-0141-00 U7 960-5007-00
Sound (256K) 965-0023-00 7F 960-5007-00 Display (4M) 965-0142-00 A1.30 ROM 0 960-5015-00

Playboy 35th Anniversary Jurassic Park

CPU (256K) 965-0046-00 A2-4 B5 960-5007-00 CPU (512K) 965-0143-00 A5.13 C5 960-7001-02
CPU (256K) 965-0047-00 A2-4 C5 960-5007-00 Voice 0 (4M) 965-0144-00 U17 960-5015-00
Voice 1 (512K) 965-0049-00 6F 960-7001-02 Voice 1 (2M) 965-0145-00 U21 960-5010-00
Voice 2 (512K) 965-0050-00 4F 960-7001-02 Sound (256K) 965-0146-00 U7 960-5007-00
Sound (256K) 965-0048-00 7F 960-5007-00 Display (4M) 965-0147-00 A5.10 ROM 0 960-5015-00

ABC Monday Night Football Last Action Hero

CPU (128K) 965-0031-00 A2-7 B5 960-5006-00 CPU (512K) 965-0148-00 A1.12 C5 960-7001-02
CPU (256K) 965-0032-00 A2-7 C5 960-5007-00 Voice 0 (4M) 965-0149-00 U17 960-5015-00
Voice 1 (512K) 965-0034-00 6F 960-7001-02 Voice 1 (2M) 965-0150-00 U21 960-5010-00
Voice 2 (512K) 965-0035-00 4F 960-7001-02 Sound (256K) 965-0151-00 U7 960-5007-00
Sound (256K) 965-0033-00 7F 960-5007-00 Display (4M) 965-0152-00 A1.06 ROM 0 960-5015-00

Robocop Tales from the Crypt

CPU (256K) 965-0036-00 A3-4 B5 960-5007-00 CPU (512K) 965-0157-00 A3.03 C5 960-7001-02
CPU (256K) 965-0037-00 A3-4 C5 960-5007-00 Voice 0 (4M) 965-0158-00 U17 960-5015-00
Voice 1 (512K) 965-0039-00 6F 960-7001-02 Voice 1 (2M) 965-0159-00 U21 960-5010-00
Voice 2 (512K) 965-0040-00 4F 960-7001-02 Sound (256K) 965-0160-00 U7 960-5007-00
Sound (256K) 965-0038-00 7F 960-5007-00 Display (4M) 965-0161-00 A3.01 ROM 0 960-5015-00

Phantom of the Opera The Who’s Tommy

CPU (128K) 965-0026-00 A3-2 B5 960-5006-00 CPU (512K) 965-0162-00 A4.00 C5 960-7001-02
CPU (256K) 965-0027-00 A3-2 C5 960-5007-00 Voice 1 (4M) 965-0165-00 U17 960-5015-00
Voice 1 (512K) 965-0029-00 6F 960-7001-02 Voice 2 (4M) 965-0166-00 U21 960-5015-00
Voice 2 (512K) 965-0030-00 4F 960-7001-02 Voice 3 (4M) 965-0167-00 U36 960-5015-00
Sound (256K) 965-0028-00 7F 960-5007-00 Voice 4 (4M) 965-0168-00 U37 960-5015-00
Sound (512K) 965-0164-00 U7 960-7001-02
Back to the Future Display (4M) 965-0163-00 A4.00 ROM 0 960-5015-00
CPU (256K) 965-0041-00 A2-0 B5 960-5007-00
CPU (256K) 965-0042-00 A2-0 C5 960-5007-00 WWF Royal Rumble
Voice 1 (512K) 965-0044-00 6F 960-7001-02 CPU (512K) 965-0169-00 A1.06 C5 960-7001-02
Voice 2 (512K) 965-0045-00 4F 960-7001-02 Voice 1 (4M) 965-0172-00 U17 960-5015-00
Sound (256K) 965-0043-00 7F 960-5007-00 Voice 2 (4M) 965-0173-00 U21 960-5015-00
Voice 3 (4M) 965-0174-00 U36 960-5015-00
The Simpsons Sound (512K) 965-0171-00 U7 960-7001-02
Display (4M) 965-0170-00 A1.02 ROM 0 960-5015-00
CPU (128K) 965-0051-00 A2-7 B5 960-5006-00
CPU (256K) 965-0052-00 A2-7 C5 960-5007-00
Voice 1 (512K) 965-0054-00 6F 960-7001-02 Guns N’ Roses
Voice 2 (512K) 965-0055-00 4F 960-7001-02 CPU (512K) 965-0175-00 A3.00 C5 960-7001-02
Sound (256K) 965-0053-00 7F 960-5007-00 Voice 1 (4M) 965-0178-00 U17 960-5015-00
Voice 2 (4M) 965-0179-00 U21 960-5015-00
Checkpoint Voice 3 (4M) 965-0180-00 U36 960-5015-00
Voice 4 (4M) 965-0181-00 U37 960-5015-00
CPU (128K) 965-0056-00 A1-7 B5 960-5006-00 Sound (512K) 965-0177-00 U7 960-7001-02
CPU (256K) 965-0134-00 A1-7 C5 960-5007-00 Display (4M) 965-0176-00 A3.00 ROM 0 960-5015-00
Voice 1 (1M) 965-0057-00 F7 960-5009-00
Voice 2 (1M) 965-0058-00 F5 960-5009-00
Sound (256K) 965-0059-00 F4 960-5007-00 Maverick *
Display (512K) 965-0060-00 CP80 U8 960-7001-02 CPU (512K) 965-0182-00 A4.04 C5 960-7001-02
Voice 1 (4M) 965-0186-00 U17 960-5015-00
Teenage Mutant Ninja Turtles Voice 2 (4M) 965-0187-00 U21 960-5015-00
Voice 3 (4M) 965-0187-01 U36 960-5015-00
CPU (128K) 965-0061-00 A1.04 B5 960-5006-00 Sound (512K) 965-0185-00 U7 960-7001-02
CPU (256K) 965-0062-00 A1.04 C5 960-5007-00 Display* (4M) 965-0183-00 A4.01 ROM 0 960-5015-00
Voice 1 (1M) 965-0063-00 F5/6 960-5009-00 Display* (4M) 965-0184-00 A4.01 ROM 3 960-5015-00
Voice 2 (1M) 965-0064-00 F4/5 960-5009-00
Sound (256K) 965-0065-00 F7 960-5007-00
Display (512K) 965-0066-00 A1.04 U8 960-7001-02 Mary Shelley’s Frankenstein *
CPU (512K) 965-0188-00 A1.03 C5 960-7001-02
Batman Voice 1 (4M) 965-0192-00 U17 960-5015-00
Voice 2 (4M) 965-0193-00 U21 960-5015-00
CPU (128K) 965-0067-00 A1.06 B5 960-5006-00 Voice 3 (4M) 965-0194-00 U36 960-5015-00
CPU (256K) 965-0135-00 A1.06 C5 960-5007-00 Sound (512K) 965-0191-00 U7 960-7001-02
Voice 1 (2M) 965-0068-00 U17 960-5010-00 Display* (4M) 965-0189-00 A1.03 ROM 0 960-5015-00
Voice 2 (1M) 965-0069-00 U21 960-5009-00 Display* (4M) 965-0190-00 A1.03 ROM 3 960-5015-00
Sound (256K) 965-0070-00 U7 960-5007-00
Display (1M) 965-0071-00 A1.06 U8 960-5009-00
Baywatch * (CPU Board 520-5003-04)
Star Trek 25th Anniversary CPU (512K) 965-0195-00 A4.00 C5 960-7001-02
Voice 1 (4M) 965-0196-00 U17 960-5015-00
CPU (512K) 965-0072-00 A2.01 C5 960-7001-02 Voice 2 (4M) 965-0197-00 U21 960-5015-00
Voice 1 (2M) 965-0073-00 U17 960-5010-00 Sound (512K) 965-0199-00 U7 960-7001-02
Voice 2 (2M) 965-0074-00 U21 960-5010-00 Display* (4M) 965-0200-00 A4.00 ROM 0 960-5015-00
Sound (256K) 965-0075-00 U7 960-5007-00 Display* (4M) 965-0201-00 A4.00 ROM 3 960-5015-00
Display (1M) 965-0076-00 A1.09 U8 960-5009-00

Hook Batman Forever * (CPU Board 520-5003-04)

CPU (512K) 965-0202-00 A3.02 C5 960-7001-02
CPU (512K) 965-0077-00 A4.08 C5 960-7001-02 Voice 1 (4M) 965-0203-00 U17 960-5015-00
Voice 1 (2M) 965-0078-00 U17 960-5010-00 Voice 2 (4M) 965-0204-00 U21 960-5015-00
Voice 2 (2M) 965-0079-00 U21 960-5010-00 Sound (512K) 965-0205-00 U7 960-7001-02
Sound (256K) 965-0080-00 U7 960-5007-00 Display* (4M) 965-0206-00 A3.00 ROM 0 960-5015-00
Display (1M) 965-0081-00 A4.01 U8 960-5009-00 Display* (4M) 965-0207-00 A3.00 ROM 3 960-5015-00

* Note: Display EPROMS (4M) for Maverick thru Batman Forever require an access time of 120 Nsec or faster.

$SSHQGL[$ 3LQEDOO*DPH
 )LUPZDUH7DEOH
 $33(1',;%
6HPL&RQGXFWRUV,QWHJUDWHG&LUFXLWV ,& 5HOD\V&URVV5HIHUHQFH7DEOH

67(51Š
1 7 (Š ( & *Š 5 & $Š
7DEOH 6RXUFH 5DGLR
6KDFNŠ
7\SH
1ž 1XPEHU 3,1%$//
5(&7,),&$7,21 %/2&.,1* '$03(1,1* ',2'(6 $1'25 /,*+7 (0,77,1* ',2'(6 /('V
  „€›––„ „„—\•––„\–– €X••— X%••— \Ÿ\Ÿ\ >ƒ“–––
  „€›––› „„—\•––œ\–– €X„„” X%„„” —†”\„„–œ >ƒœœ„—
  „€•›–„ „„—\––•”\–– €X•˜–„ X%•˜–„ —†”\„„›œ >ƒ“––›
  „€•›–› „„—\•––›\–– €X•˜–› X%•˜–› —†”\„„›› >ƒ“––†
  
 
”„–^
Z$œ–—
„„—\•––”\–„
„„—\•––“\––
€X•˜„—
€X•˜˜
X%•˜„—
X%•˜˜
\Ÿ\Ÿ\
\Ÿ\Ÿ\
\Ÿ\Ÿ\
>ƒ•–„›
 >   „€“„› „„—\•–„›\–– \Ÿ\Ÿ\ \Ÿ\Ÿ\ \Ÿ\Ÿ\ \Ÿ\Ÿ\
Œ=  Š „”•\•–•—\––
^X =$Š† %ˆ‰ \Ÿ\Ÿ\ \Ÿ\Ÿ\ —†”\–””@ \Ÿ\Ÿ\
‘„\œ=› ’ KŠX‹XKŒŒ‹ŒŒ
=(1(5 ',2'(6
  „€›†›—„— „„—\––”„\–– €X„›— X%„›— —†”\•”œ >ƒ„—{
  „€›†”–@”˜ „„—\––”—\––@ €X•–“— X%•–“— \Ÿ\Ÿ\ >ƒ”˜{
  „€›†”›„–– „„—\––›“\–– €X•–“” X%•–“” \Ÿ\Ÿ\ >ƒ„––{


  „€•——˜œ“ „„—\––•œ\–– €X•––† X%•––† \Ÿ\Ÿ\ >ƒœ“
  „€•—œ›@”— „„—\––›†\––@ €X•–„œ X%•–„œ —†”\•”„ >ƒ”—
  „€•œ†“„„– „„—\––†—\–– €X•„•† X%•„•† \Ÿ\Ÿ\ >ƒ„„–
  „€”—”†”˜ „„—\•–„„\–– €X›“–— X%›“–— \Ÿ\Ÿ\ \Ÿ\Ÿ\
  „€›†•—œœ „„—\•–„–\–– €X„›† X%„›† \Ÿ\Ÿ\ >ƒœœ{
  „€›†œ””˜„ „„—\•––†\–– €X•–†„ X%•–†„ \Ÿ\Ÿ\ \Ÿ\Ÿ\
75$16,67256  7<3( )(7 131 313 $1'25 6&5
ZX  >'—–€„–^ „„–\–„–”\–– €X—“˜† X%—“˜† \Ÿ\Ÿ\ \Ÿ\Ÿ\
ZX  >'„“€–”^ „„–\––˜˜\–– €X—“˜• X%—“˜• \Ÿ\Ÿ\ \Ÿ\Ÿ\
ZX  {€–—€ „„–\––˜“\–– \Ÿ\Ÿ\ \Ÿ\Ÿ\ \Ÿ\Ÿ\ \Ÿ\Ÿ\
€'€  —€››–„ „„–\––†œ\–– €X˜• X%˜• —†”\—––“ >ƒœ„—›
€'€  —€”›—† „„–\––†–\–– €X›˜ X%›˜ \Ÿ\Ÿ\ >ƒ›“–”
€'€  } Xœ›– „„–\––†„\–– €X„•† X%„•† \Ÿ\Ÿ\ >ƒœ†›†
€'€  }'>›— „„–\––˜—\–– €X—˜† X%—˜† \Ÿ\Ÿ\ >ƒœ—œ—
€'€  —€œ“–› „„–\––”“\–– €X„—œ' X%„—œ' —†”\—––“ \Ÿ\Ÿ\
 €'€ 
€'€ 
'„——
} X„•–œ–
„„–\––”†\––
„„–\–„–„\––
€X—”„
€Xœ†•
X%—”„
X%œ†•
—†”\—–”˜
\Ÿ\Ÿ\
>ƒœ˜“”
>ƒ“„„˜
'€'  —€•›–„ „„–\––†˜\–– €X—˜˜ X%—˜˜ \Ÿ\Ÿ\ >ƒœ›œ›
'€'  } X„•–œ„ „„–\–„–œ\–– €X—“— X%—“— \Ÿ\Ÿ\ >ƒœ››„
'€'  } Xœ•– „„–\––†—\–– €Xœ†› X%œ†› \Ÿ\Ÿ\ >ƒ“–›—
'€'  }'>“— „„–\–„––\–– €X—˜˜ X%—†˜ \Ÿ\Ÿ\ >ƒœ›œ›
'€'  '›— „„–\––”˜\–– €Xœœ— X%œœ— \Ÿ\Ÿ\ >ƒ“—œ”
'€'  'œ—% „„–\––˜„\–– €X—“— X%—“— \Ÿ\Ÿ\ >ƒœ››„
'€'  'œ”% „„–\––††\–– €Xœ“œ X%œ“œ \Ÿ\Ÿ\ >ƒœ“”„
>%$  —€•–”– „„–\––†›\–– €X•›–– X%•›–– —†”\„–”† >ƒœ“•–
>%$  >%$—˜––@ „„–\––˜œ\–– €X•›”„\˜ X%•›”„\˜ \Ÿ\Ÿ\ \Ÿ\Ÿ\
%5,'*( 5(&7,),(56 %5 &RPPHQWV

 @$‘'  ’
5(/$<6
@œ•–„
%}œ•–„
„„—\•–––\–– Z¡>=?@ @$¢œ•£„––'{

&RPPHQWV
$  Z$^\—”› „“–\•––—\–– Z''@'> ¤¡ >=?@ 


–—›=–—%ƒ $ ¢—›%„–'
Z$^\—”› Z%'<@ 
$  „“–\•––„\––
––”=–›%{ $ ¢”%•›' 

$SSHQGL[% 6HPL&RQGXFWRUV
 &URVV5HI7DEOH
 $33(1',;&
3URGXFWLRQ6WDUW'DWH0DQXDO3DUW1ž5206L]H 3RVLWLRQVDQG
-XPSHU:,QVWDOOHG1RWH‡ :KLWH6WDU%RDUG6\VWHP 6$06\VWHP2QO\* 

*DPH 1DPH
CPU/Sound Board Sound U7 512K
3URGXFWLRQ CPU/Sound *DPH 1DPH 3URGXFWLRQ CPU/Sound Board Sound U7 512K

‡ VHH 1RWH
6WDUW 'DWH CPU/Sound Board Game U210 1MB

,QVWDOOHG
:KLWH 6WDU 6WDUW 'DWH Board Game U210 1MB
:KLWH 6WDU

-XPSHU
DQG 0DQXDO CPU/Sound Board Voice ROMS: DQG 0DQXDO CPU/Sound Board Voice ROMS:
%G 6\VWHP• 3DUW 1U U17 U21 U36 U37
%RDUG 6\VWHP• 3DUW 1U U17 U21 U36 U37
* Note: For complete Appendix Information for Games Laser War 54 Elvis® AUG 04
780-5084-00 8MB 8MB 8MB 8MB
through Batman Forever, see any Service Game Manual SM
between Apollo 13 through Ripley’s Believe It or Not! 55 The Sopranos FEB 05
780-5085-00 8MB 8MB 8MB 8MB
or on-line at our website www.sternpinball.com/parts.htm;
also available on CD-R, 970-2003-00 (The Simpsons•
Pinball Party, T3® and The Lord of the Rings• ). 56 NASCAR® JUL 05 8MB 8MB 8MB 8MB
780-5086-00

29 Apollo 13 NOV 95 4MB 4MB 4MB Not n/a 57 Grand Prix SEP 05 8MB 8MB 8MB 8MB
(A13) 780-5044-00 Used 780-5091-00

30 Golden
Eye
FEB 96
780-5042-00 4MB 4MB Not
Used
Not
Used n/a See Apdx. A for more detailed information on Pinball Game Firmware (ROM
Name, Size, Part Numbers, USA Version & Checksum and Board Locations).
31 Twister APR 96 4MB 4MB Not Not n/a 3URGXFWLRQ S.A.M. System CPU/Sound Board
780-5041-00 Used Used
*DPH 1DPH 6WDUW 'DWH Boot EPROM U9
32 ID4: Independ-
ence Day
JUL 96
780-5045-00
4MB 4MB Not
Used
Not
Used
n/a 6$0 6\VWHP DQG 0DQXDO
3DUW 1U 965-BOOT-SAM (Programmed)
33 Space
Jam
OCT 96
780-5043-00 4MB 4MB 4MB Not
Used n/a 58 World Poker Tour• JUN 06 8MB B-02 chksum LOC:
(WPT) 780-5088-00 V2.1+ $F625 U9
34 Trilogy - Sp. Ed. FEB
The Star Wars 97
780-5056-00 4MB 4MB Not
Used
Not
Used n/a 59 The Simpsons• APR 06 8MB B-02 chksum LOC:
Kooky Carnival 780-5090-00 V2.1+ $F625 U9
35 The Lost World: JUN 97 4MB 4MB Not Not n/a 60 ©Disney’s AUG 06 8MB B-02 chksum LOC:
Jurassic Park 780-5053-00 Used Used Pirates of the Caribbean 780-5092-00 V2.1+ $F625 U9
The AUG 97 Not Not
36
X-Files 780-5046-00
4MB 4MB
Used Used
n/a 61 Famil Guy• DEC 06
780-5093-00 8MB B-02 chksum LOC:
V2.1+ $F625 U9
37 Starship
Troopers
NOV 97
780-5059-00 4MB 4MB 4MB Not
Used n/a 62 Spider-Man• MAY 07 8MB B-02 chksum LOC:
780-5094-00 V2.1+ $F625 U9
38 Viper
Drivin’
Night FEB 98
780-5035-00 4MB 4MB 4MB 4MB n/a Games 58 – current, S.A.M. System : CPU/Sound & I/O Power Driver PCBs
Lost In JUN 98 differ than White Star (previous Games 29 – 57); Disp. Controller Not Required.
39 4MB 4MB 4MB 4MB n/a
Space 780-5060-00
40 Godzilla SEP 98 4MB 4MB 4MB 4MB n/a
780-5040-00
South
41 Park JAN 99 8MB 8MB 8MB 8MB W6
780-5071-00
42 Harley- AUG 99 8MB 8MB 8MB 8MB W6
a Davidson® 780-5067-01
42 Harley-David- SEP 02 8MB 8MB 8MB 8MB W6
b son®2nd Ed. 780-5067-10
42 Harley-David- OCT 04 8MB 8MB 8MB 8MB W6
c son® 3rd Ed. 780-5087-00
43 Striker MAR 00 8MB 8MB 8MB 8MB W6
a Xtreme 780-5068-01
43 NFL OCT 00 8MB 8MB 8MB 8MB W6
b 780-5073-00
44 Sharkey’s JUL/OCT 00 8MB 8MB 8MB Not W6
Shootout 780-5072-01 Used
45 High Roller JAN 01 8MB 8MB 8MB 8MB W6
Casino 780-5065-00
46 Austin MAY 01 8MB 8MB 8MB 8MB W6
Powers• 780-5074-00
47 MONOPOLY® 780-5075-00
SEP 01 8MB 8MB 8MB Not
Used W6

48 Playboy FEB 02 8MB 8MB 8MB 8MB W6

780-5076-00
49 RollerCoaster AUG 02 8MB 8MB 8MB Not W6
Tycoon• 780-5078-00 Used
The Simpsons
50 Pinball Party • JAN 03
8MB 8MB 8MB 8MB W6
780-5077-00
51 T3®: Rise of MAY 03
the Machines• 780-5079-00 8MB 8MB 8MB 8MB W6

52 The Lord of
the Rings•
NOV 03
780-5080-00 8MB 8MB 8MB 8MB

53 Ripley’s Believe APR 04 8MB 8MB 8MB 8MB

It or Not!® 780-5081-00
‡ Additional Information for Installed Jumper (above games 41-51):
x Installed W6 so 8MB ROMS can be utilized. See the CPU/Sound Board
Schematic (Sheet 2 of 3, Address Location 3E) in the games’ Service Game
Manual. Games 52 - 57 CPU/Sound Board differ than <51 (See Appendix D).
See Apdx. A for more detailed information on Pinball Game Firmware (ROM
Name, Size, Part Numbers, USA Version & Checksum and Board Locations).

3URGXFWLRQ6WDUW $SSHQGL[&
,QVWDOOHG1RWH 
 $33(1',;'
%RDUG7\SH :KLWH6WDU%RDUG6\VWHP 2QO\ 7DEOH

*DPH )OLSSHU ,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[ 'LVSOD\ 2372 2372 2372
1DPH 'ULYHU 6WHUHR 6XSSO\ 'LVSOD\ &RQWUROOHU 7UDQVPLWWHU 5HFHLYHU $SSOLFDWLRQ

•—–\•–˜–\–– •—–\•„œ†\––
•—–\•„œ”\–– •—–\•–•—\––
•—–\•„œ˜\–– „—˜ •—–\•„—›\––
•—–\•–••\–„ > •—–\•„—•\–– •\@ 
—\Z  œ—  ?'? >  ?'? <\ƒ _
 „œ ^ @ •—–\•„œ–\–„\–›¤\–•}   
}    $ @
'%@ ‡ †\>   ¤^ @•—–\•„œ–\–”}  
•—–\•–„–\––
@•—–\•„œ–\–—>  } @•—–\•„œ–\–œ
•—–\•–˜–\–– •—–\•„œ†\–– •—–\•„œ”\–– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– •\@ 
—\Z  „—˜ œ— >  ?'? >  ?'? <\ƒ _
  X
}    ^ @ }'   — @ $ @
'%@ ‡ •—–\•„—˜\–•\–˜ •—–\•„›œ\–– •—–\•–„–\––
}X>‚X$X?€€?^?€X$$X¦<$X‚XZ^''X$@?$¡‚‚X¡‚X>$@?$>§>X}•
*DPH ,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[ 'LVSOD\ 2372 2372 2372 0LVF 2372
1DPH 'ULYHU 0RQR 6XSSO\ 'LVSOD\ &RQWUROOHU 7UDQVPLWWHU 5HFHLYHU $SSOLFDWLRQ $SS
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– •\@ 
„—˜ œ— >  ?'? >  ?'? <\ƒ _
 
}    ^ @ }@ $ @
'%@ ‡ •—–\•„›•\–„\–† •—–\•„›œ\–– •—–\•–„–\––
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– ›\@ 
    „—˜ œ— >  ?'? >  ?'? <\ƒ _
‘›’ }    ^ @ >}@ •—–\•–˜—\–– •—–\•–˜œ\––   ‚
'%@ ‡ •—–\•„›“\–„\„– •—–\•„•—\–– ^ ‚‡=‡ ^ ‚‡=‡ X 
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– •\@ 
„—˜ œ— >  ?'? >  ?'? <\ƒ _
>  
}    — †\>   @
'%@ ‡ •—–\•„•œ\––
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– ›\@ 
> „—˜ œ— >  ?'? >  ?'? <\ƒ _
¡   
\>  X }    $ @
'%@ ‡ •—–\•–„–\––
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– ›\@  •—–\•„”—\––
^  „—˜ œ— >  ?'? >  ?'? <\ƒ _ —\' }
¡ ‡ ' }    ' %$ @ >_}@ > 
%@ ‡ •—–\•–””\–– •—–\•–”•\–– > }
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– ›\@  •—–\•„••\––
„—˜ œ— >  ?'? >  ?'? <\ƒ _ œ\' }
 \Z  > 
}    •—–\•–˜—\–– •—–\•–˜œ\–– Z %  Z %
'%@ ‡ ^ ‚‡=‡ ^ ‚‡=‡ X  }
•—–\•„œ†\–„ •—–\•„œ”\„• •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–— •—–\•„—›\–– •—–\•„—•\–– ›\@ 
>   „—˜ œ— >  ?'? >  ?'? <\ƒ _
 }    › †\>   @ •—–\•–˜—\–– •—–\•–˜œ\–„ ^=$? 
'%@ ‡ •—–\•„””\–– ^ ‚‡=‡ ^ ‚‡=‡ ^ X 
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •—–\•„—›\–– •—–\•„—•\–– ›\@ 
{ €  „—˜ œ— >  ?'? >  ?'? <\ƒ _
  ¨ }    $ @ •—–\•–˜—\–– •—–\•–˜œ\–„
'%@ ‡ ^ ‚‡=‡ ^ ‚‡=‡ $
•—–\•–„–\––
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@ 
„—˜ œ—  ?'?  ?'? <\ƒ _
^  > 
}    $ @
'%@ ‡ •—–\•–„–\––
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@ 
„—˜ œ—  ?'?  ?'? <\ƒ _
 
}    >_}@
'%@ ‡ •—–\•–”•\––
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– •\@ 
„—˜ œ—  ?'?  ?'? <\ƒ _
>'_
}    •—–\•–˜—\–– •—–\•–˜œ\–„ ƒ < 
'%@ ‡ ^ ‚‡=‡ ^ ‚‡=‡ X 
‚ \ •—–\•„œ†\–„ •—–\•„œ”\„” •—–\•–•—\–– •„•\–„†œ\–– •„•\–„†›\–– ›\@ 
   © *•—–\•œ––\––* •—–\•„œ˜\–– „—˜ œ— •—–\•–••\–œ  ?'?  ?'? <\ƒ _
„ \œ* }    $ @ >_}@  @ •—–\•–˜—\–– •—–\•–˜œ\–„ }  
X   '%@ ‡ •—–\•–„–\–– •—–\•–”•\–– •—–\•„›”\–– ^ ‚‡=‡ ^ ‚‡=‡ X 
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•–•—\––
•—–\•„œ˜\–– „—˜ •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@  •—–\•„••\––
> _ œ—  ?'?  ?'? <\ƒ _ œ\' }
  Ž‡'$¤¦ > 
‘€Z^’ }    %$ @ $ @  @ €§ƒ€_;€ •—–\•–˜—\–– •—–\•–˜œ\–„  < \
'%@ ‡ •—–\•–””\–– •—–\•–„–\–– •—–\•„›”\––  ›  ^ ‚‡=‡ ^ ‚‡=‡ X   }
•—–\•„œ†\”› •—–\•„œ”\”› •—–\•–•—\––
•—–\•„œ˜\–– „—˜ •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@  •—–\•„“›\––
>_¨ œ—  ?'?  ?'? <\ƒ _ ›\' }
> }    ' $ @ > X`@ > 
%@ ‡ •—–\•–„–\–– •—–\•„“—\–– ª\@ }
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•–•—\––
•—–\•„œ˜\–– „—˜ •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@  •—–\•„“›\––
œ—  ?'?  ?'? <\ƒ _ ›\' }
‚ $  •—–\•–˜—\–– •—–\•–˜œ\–„ @ ^ _ > 
%  ^ ‚‡=‡ ^ ‚‡=‡  $  $ 
}      ‘• †’ > }   Ž‡'$¤¦
•—–\•„“”\–– •—–\•„“•\–– <= $ ¡
'%@ ‡ •—–\•„“†\––
€§ƒ€_;€
œ\' ?'? œ\' ?'? > }  }
 › 

•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@ 

  „—˜ œ—  ?'?  ?'? <\ƒ _ •—–\•—„—\––
' • }    ' $ @‘ œ’  Ž‡'$¤¦
€§ƒ€_;€ •—–\•–˜—\–– •—–\•–˜œ\–„  }  
 {_{_
‡=‡ƒ Œ
%@ ‡ •—–\•–„–\––  ›  ^ ‚‡=‡ ^ ‚‡=‡ $
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@ 
„—˜ œ—  ?'?  ?'? <\ƒ _
}?€?'?^§©  Ž‡'$¤¦
}    ' %$ @ } \  ‘œ• †’ €§ƒ€_;€ •—–\•—„˜\–– •—–\•—„–\–– @ _
%@ ‡ •—–\•–””\–– •—–\•„“†\––{_„  ›  ›\' ?'? ›\' ?'? 
?      • 

$SSHQGL[' %RDUG
 7\SH7DEOH
 $33(1',;'
%RDUG7\SH :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH

*DPH ,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[ 'LVSOD\ 2372 2372 2372 0LVF 2372
1DPH 'ULYHU ROG QHZ 6XSSO\ 'LVSOD\ &RQWUROOHU 7UDQVPLWWHU 5HFHLYHU $SSOLFDWLRQ $SS
520-5137-01 520-5136-16 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough
128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
Playboy for UK ONLY> Sol-
Miscellaneous DC Relay Bd. Relay Bd. enoid Expander Bd.
PC Boards: 520-5066-00 520-5010-00 520-5192-00

520-5137-01 520-5136-16 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 520-5222-00
RollerCoaster 128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker 1-Position
Tycoon• for UK ONLY> Sol-
Miscellaneous DC Relay Bd. Mini-Dot Display (3 by 5X7) enoid Expander Bd. 520-5082-00 520-5083-01 Behind 1-Bank Switch Detect
PC Boards: 520-5066-00 520-5221-00 (Ramp Enter Sign) 520-5192-00 Long Hop OPTO Long Hop OPTO Drop Target on Wheel Spin
The 520-5137-01 520-5136-16 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough
Simpsons• X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
Pinball Miscellaneous LED Bd. Color Dot Display (4 by 5X7) for UK ONLY 999
Aux. Driver Bd.
Party PC Boards: 520-5219-00 520-5225-00 (TV Set) 520-5068-01
Terminator® 520-5137-01 520-5136-16 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough
3: X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
Rise of the Miscellaneous for UK ONLY 999 515-7307-00 515-7308-00 TXCannon
Aux. Driver Bd.
Machines• PC Boards: 520-5068-01 Single OPTO Single OPTO Trough
520-5137-01 New 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 500-6746-00
The Lord 520-5300-00 128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker (White Trans.)
of the
Miscellaneous 19-LED PCB OPTO Transmitter / Receiver for UK ONLY 999 515-7307-00 515-7308-00 Orthanc Tower 500-6747-00
Rings• Aux. Driver Bd.
(Black Rec.)
PC Boards: 520-5242-00 Amplifier PCB 520-5239-00 520-5068-01 Single OPTO Single OPTO Trough
520-5137-01 520-5300-00 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 500-6775-00
Ripley’s X 32 Dots Dual OPTO Dual OPTO over Up-Kicker OPTO Trnscvr
Believe It
Miscellaneous 520-5236-00 OPTO Transmitter / Receiver for UK ONLY 999 520-5234-00 520-5234-00 520-5235-03
or Not!® Aux. Driver Bd. Vari-Target
PC Boards: X3 Dot Display Amplifier PCB 520-5239-01 520-5068-01 3-Pos. OPTO 3-Pos. OPTO X3 Aux. Drvr
520-5137-01 520-5300-00 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough
X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
Elvis®
Miscellaneous for UK ONLY 999
Aux. Driver Bd.
PC Boards: 520-5068-01

520-5137-01 520-5300-00 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough

The 128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
SopranosSM Miscellaneous for UK ONLY 999
Aux. Driver Bd.
PC Boards: 520-5068-01

520-5137-01 520-5300-00 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 500-6775-00
NASCAR® 128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker OPTO Trans.
and [NDSE] Miscellaneous 520-5235-03 OPTO Transmitter / Receiver for UK ONLY 999 (Qty. 16)
Aux. Driver Bd.
PC Boards: X3 Aux. Drvr Amplifier PCB 520-5239-01 520-5068-01 Switch Detect.
520-5137-01 520-5300-00 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 500-6775-00
X 32 Dots Dual OPTO Dual OPTO over Up-Kicker OPTO Trans.
Grand Prix
Miscellaneous 520-5235-03 OPTO Transmitter / Receiver for UK ONLY 999 (Qty. 16)
Aux. Driver Bd.
PC Boards: X3 Aux. Drvr Amplifier PCB 520-5239-01 520-5068-01 Switch Detect.

*DPH ,2 3RZHU &38  'LVS 3RZHU 'RW 0DWUL[ 'XDO 2372 'XDO 2372 'XDO 2372 2372 7UDQVFHLYHU
1DPH 'ULYHU 6RXQG 6XSSO\ 'LVSOD\ 7UDQVPLWWHU 5HFHLYHU 7UDQVFHLYHU 0LVFHOODQHRXV
520-5249-00 520-5246-00 520-5138-00 520-5052-00 515-0173-00 515-0174-00 520-5251-00 ’U’ 1/per PCB
World Poker Backbox Backbox Backbox 128 X 32 Dots 4-Ball Trough 4-Ball Trough 500-6775-00 Jail Bars Up Ace/Hole Mech
Tour• 4 Switch Pairs
(WPT) Miscellaneous 520-5254-00 520-5250-14 520-5239-01 520-5247-00 520-5248-00 (Qty. 8) 520-5252-04 ’U’ 4/per PCB
PCBs : 50V Step-Up Drv 14LED 5X7 Disp. OPTO Amplifier Ace/Hole Mech Ace/Hole Mech Drop Targets 4- & 8- Banks
The 520-5249-00 520-5246-00 520-5138-00 520-5052-00
Simpsons• Back Door Back Door Cabinet Rear 128 X 32 Dots 520-5253-00-ASY
Kooky Coin Drop
Miscellaneous 515-5742-00 500-6700-00 (Qty. 11)
Carnival PCBs : Shaker PCB Relay (incl. Wiring + Conn.)
520-5249-00 520-5246-00 520-5138-00 520-5052-00 515-0173-00 515-0174-00
©Disney’s Backbox Backbox Backbox 128 X 32 Dots 4-Ball Trough 4-Ball Trough 500-6775-00
Pirates 5 Switch Pairs
of the Miscellaneous 520-5239-01 511-5024-03
Caribbean PCBs : OPTO Amp. (X3) Relay (incl. Wiring + Conn.) (Qty. 10)
520-5238-00 : H-E-A-R-T LED PCB
520-5249-00 520-5246-00 520-5138-00 520-5052-00 515-0173-00 515-0174-00 500-6775-00 520-5252-01 ’U’ 1/per PCB
Backbox Backbox Backbox 128 X 32 Dots 4-Ball Trough 4-Ball Trough 3 Switch Pairs
(Qty. 6) Drop Target 1-Bank
Family
Guy• Miscellaneous 520-5239-01 520-5261-00 511-5042-01 500-6775-01
PCBs : OPTO Amp. (X2) Stepper Motor Trgt. Sensor (X2) 1 Switch Pair 520-5252-04 ’U’ 4/per PCB
(Qty. 2) Drop Target 4-Bank
511-5046-00 : Mini Playfield Lamp PCB
520-5249-00 520-5246-00 520-5138-00 520-5052-00 515-0173-00 515-0174-00 500-6775-00
Backbox Backbox Backbox 128 X 32 Dots 4-Ball Trough 4-Ball Trough 3 Switch Pairs
Spider- (Qty. 6)
Man•
Miscellaneous 520-5239-01
PCBs : OPTO Amp. (X2)

%RDUG $SSHQGL['
7\SH7DEOH 
 $33(1',;'
%RDUG7\SH7DEOH
*DPH 1DPH )OLSSHU 6RXQG 3RZHU 6XSSO\ 'LVSOD\ ;'LJLW
initial: Master: 520-5004-00 plus:
2-Flipper 520-5002-00
x Laser War 520-5005-00 (Qty. 2): 7 Digit Alpha/Numeric
Board Not Required replaced with: 520-5006-00 (Qty. 2): 7 Digit Numeric
520-5002-02 520-5007-00 (Qty. 1): 4 Digit Numeric
520-5002-01 was not used.
x Secret Service 3-Flipper
x Torpedo Alley Board Not Required
520-5000-00 520-5014-01
x Time Machine 2-Flipper 7 Digit Alpha/Numeric Combined
Board Not Required
x Playboy 35th Anniversary * 520-5002-02
520-5033-00
x ABC Monday Night Football * 2-Flipper
x Robocop (*only for 100 games of 520-5030-00
x Phantom of the Opera 16 Digit Alpha/Numeric Combined
x Back to the Future Playboy 35th Anniv. &
x The Simpsons ABC Mon. Night Football) 520-5002-03

*DPH )OLSSHU 6RXQG 3RZHU 'RW 0DWUL[ 'LVSOD\ 2372 2372 2372
1DPH 6XSSO\ 'LVSOD\ &RQWUROOHU 7UDQVPLWWHU 5HFHLYHU $SOOLFDWLRQ
x Checkpoint
x Teenage 520-5002-03
Mutant Ninja
Turtles 520-5042-00
520-5047-00
x Batman 128 X 16
x Star Trek 520-5033-00
25th Anniv.
x Hook 2-Flipper 520-5050-01
x Lethal
Weapon 3
x Star Wars 520-5047-01
x Rocky & Bull-
winkle & Friends 520-5050-02 520-5055-00
x Jurassic Park 520-5076-00
3-Flipper
x Last Action 520-5070-00 520-5052-00
Hero 2-Flipper 128 X 32
520-5050-03
x Tales from
the Crypt 520-5076-00 520-5047-02
x The Who’s 3-Flipper
Tommy 520-5055-01
x WWF Royal 520-5070 / 5080 -00
520-5077-00
Rumble 4-Flipper (2X2)
x Guns N’
Roses 520-5076-00
x Maverick 3-Flipper 520-5102-00 520-5103-00 Paddle Boat
520-5050-03
Single OPTO Single OPTO Wheel Enter
x Mary Shelley’s 520-5076-00
Frankenstein 520-5077-00 520-5075-00
3-Flipper 520-5047-03 520-5092-01
520-5070 / 5080 -00 192 X 64 520-5124-00 520-5125-00 5-Ball Trough
x Baywatch
4-Flipper (2X2) Single OPTO Single OPTO over Up-Kicker
520-5126-02
x Batman 520-5076-00 520-5124-00 520-5125-00 4-Ball Trough
Forever 3-Flipper Single OPTO Single OPTO over Up-Kicker
Miscellaneous Boards (Lamp Boards & Relay Boards) not listed above can be found in each individual game manual.

$SSHQGL[' %RDUG
 7\SH7DEOH
 $33(1',;(
)OLSSHU&RLO :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH
„ < _  ^†‡‡†Z' '    _  „ˆ @ Z|' € ' '|‰_    ˆZ' Z|   ' '| 

}ƒ@ƒ' „}†?'??'}' ‡ @' „'??@ ‘ ?'??'}' ‡

 |}ˆ  @„:‡ ?'? ˆ‰     |}ˆ  @„:‡ ?'? ˆ‰   
  |‘ : ‘’‘Ž“‘”|ŽZ Š |‹‹Š „  ›  : ‘’‘Ž“‘”‘ŽZ Š |‹Œ}Ž˜›|–‘‘–|“–‘–Š 
  |• : ‘’‘Ž“‘|•ŽZ Š Ž‘‘Š „ |Œ‹Š „\ ž ˆŠž
:  ’ ”— : ‘’‘Ž“‘||ŽZ Š |‹‹ƒ{ƒ'}Ž˜Š “
  ””
:
‘’‘Ž“‘|•ŽZ Š Ž‘\Š \_|‹}Š „
Ž‘\Š \_|‹}Š „   ’”‘ :
  }| ‘’‘Ž“‘””ŽZ Š
  }– : ‘’‘Ž“‘|’ŽZ Š Ž‘‘Š „  › }–“ : ‘’‘Ž“‘”‘ŽZ Š Ž”‘„Š „Ÿˆ˜˜ž
  : Ž‘\Š \_|‹}Š „ |‹|ƒŠ 
}— ‘’‘Ž“‘‘|ŽZ Š
|˜||™˜|ƒŠ    –” : ‘’‘Ž“‘}”ŽZ Š Ž‘\Š\_|‹}Š„Ÿˆ˜Ž{ ž
  : Ž‘‘Š „ |Š 
–‘
:
‘’‘Ž“‘‘“ŽZ Š
 ’ ”– : ‘’‘Ž“‘‘—ŽZ Š Ž‘‘ƒ{ƒ'}Ž˜Š “
  }— ‘’‘Ž“‘}•ŽZ Š Ž‘}Š „
  •“‘ :
 › : Ž‘”Š „|Œ‹˜|–™˜
“‘
:
‘’‘Ž“‘‘”ŽZ Š
 ’ }‘ : ‘’‘Ž“‘|}ŽZ Š Ž‘‘ƒ{{ƒ'Š „
 › ““ ‘’‘Ž“‘}—ŽZ Š Ž‘\Š \_|‹}Š „
Z ‹‹|Ž‹ŽŒ|‹Œ˜||™˜   š}“ :
:  ’ ”– : ‘’‘Ž“‘|”ŽZ Š Ž‘‘ƒ{{ƒ'Š „
  ’}
:
‘’‘Ž“‘}–ŽZ Š Ž‘‘Š \_
Ž‘\Š \_|‹}Š „   ’‘“ :
  |‘} ‘’‘Ž“‘––ŽZ Š
|˜||™˜|ƒŠ   › –‘“ : ‘’‘Ž“‘”‘ŽZ Š Ž}‘Š „{ ˆˆž
   |–” :
‘’‘Ž“‘‘}ŽZ Š Ž‘„Š „   “| : ‘’‘Ž“‘}‘ŽZ Š Ž‘„Š „ {ˆž
|ƒŠ 
  |–• :
‘’‘Ž“‘|“ŽZ Š Ž‘‘Š \_
 \^_  >~Z|<'' •|  : ‘’‘Ž“‘‘šŽZ Š Ž‘‘Š „\˜ ž
  ŽŒŒ|Ž‹‚Œ|‹‹
   |—} :
‘’‘Ž“‘‘–ŽZ Š Ž‘\Š \_|‹}Š „   ––  : ‘’‘Ž“‘—”ŽZ Š Ž‘‘Š „\˜ˆž
›  }}— :
‘’‘Ž“‘|—ŽZ Š Ž‘‘Š „   ’“  : ‘’‘Ž“‘”“ŽZ Š Ž‘‘Š „\˜ˆž
@ƒ'{‘''' „}??'}' ‡    : ‘’‘Ž“‘—•ŽZ Š Ž‘„Š „ ˆŠž
  ”’ : ‘’‘Ž“‘—–ŽZ Š Ž‘”˜ƒ|–™˜˜    : ‘’‘Ž“‘—šŽZ Š Ž‘„Š „¡^„ˆž
   –} : ‘’‘Ž“‘–”ŽZ Š Ž‘‘˜ƒ—™˜˜  |}š  : ‘’‘Ž“‘–|ŽZ Š Ž‘„Š „\˜ˆŽ{ ˆˆž
|‹Œ˜ƒ|”™˜˜ ''' „@ }`}@'???'}' ‡
  š‘ : ‘’‘Ž“‘—|ŽZ Š Ž‘‘˜ƒ—™˜   ›   : ‘’‘Ž“‘–—ŽZ Š Ž‘|Š „
›  |“” : ‘’‘Ž“‘“’ŽZ Š Ž‘‘˜›Š ›?  ?    ||“ : ‘’‘Ž“‘–—ŽZ Š Ž‘‘Š „
   “”‘ : ‘’‘Ž“‘Ž’Ž‘‘Š    ˜›Š › ?    : “‘‘Ž—’•—Ž‘| ˜Š —™˜??
‘’‘Ž“‘ŽŽŽ‘‘Š ’‘œ˜›Š ›?  ?  ›  : ‘’‘Ž“‘|‘ŽZ Š Ž‘‘Š „
  }@Z @    ' '|'     '    }“‘ : ŽŒŽ|”Œ”|‹ŒŠ ' Z !  Ÿˆ˜˜ž
  “‘” :
  <  Z'   <  @  Ž‘\Š \_|‹}Š „
$ 'Z       @    'Z|    <  ‘’‘Ž“‘}|ŽZ Š
Z `‚ ' Z Z' '|!Z   ƒ 
 @    $   _ '|    € ''    €“|“Ž—||‘Ž‘‘‚
 › “’‘ : ŽŒŽ|”Œ”|‹‹Š ' Z   ƒ ¡^„ˆž

)OLSSHU&RLO :KLWH6WDU%RDUG6\VWHP 2QO\ 7DEOH

'??@  '??@    \^
  
  ?'`{|}{@ `  ?'`{|}{@ ` 
@} @@'€} {??@} {??@@'€}
¬>* Ž J'=J'‘J=– ; q @^< %' ‘JZ*@;! ;
+ \—q ^>Z’$‹<“”Œ‹QŒŒ•‹ŒŒ ?   •  \<? “? =  + • 
  –“–\•–œ—\–
„œ    ¤$ ‹Š'
>}X €<  €< 
  –“–\•–œ—\–
X    ¤$ ‹Š' >}X €<  €< 
–“–\•–—–\—– –“–\•–œ—\–
    › ¤$$‡ˆ   ¤$ ‹Š' €<  €< 
›‡ –“–\•–œ—\– –“–\•–—–\œ–
    ‚   ¤$ ‹Š' >}X €<   › ‹Š'
>  –“–\•–œ—\– –“–\•–—–\—–
†    ¤$ ‹Š'  › ¤$$‡ˆ €<  €< 
>¡  \ –“–\•–œ—\–
>  X   †    ¤$ ‹Š' >}X €<  €< 
^ ¡ ‡ –“–\•–œ—\–
 '_ †    ¤$ ‹Š' >}X €<  €< 
 –“–\•–œ—\–
\Z  †    ¤$ ‹Š' >}X €<  €< 
>   –“–\•–œ–\– –“–\•–œ—\–
 † ‚   ‡Š'‹ >}X €<    ¤$ ‹Š'
{  –“–\•–œ–\–
€   ¨ †    ‡Š'‹ >}X €<  €< 
^  –“–\•–œ–\– –“–\•–œ—\–
>  †    ‡Š'‹   ¤$ ‹Š' €<  €< 

  † –“–\•–œ—\–
   ¤$ ‹Š' >}X €<  €< 
> –“–\•–œ–\–
'_ †    ‡Š'‹ >}X €<  €< 
† % '€    =           '‹@'';'| ?      • 
% '€    ;         

$SSHQGL[( &RLO&URVV5HI*XLGH
 )OLSSHU&RLO7DEOH
 $33(1',;(
)OLSSHU&RLO :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH

FLIPPERS w/E.O.S. Switch FLIPPERS no E.O.S. Switch

GAME NAME Nº of
Flippers SPI Nº / GAUGE-TURNS / Color SPI Nº / GAUGE-TURNS / Color
LOWER LEFT LOWER RIGHT UPPER LEFT UPPER RIGHT
Harley-Davidson® † and 090-5032-0T 090-5030-0T
1st through 3rd Editions 2 22-1080 -YEL-GRN- 23-1100 -ORANGE- Not Used Not Used
Striker Xtreme 090-5032-0T 090-5030-0T 090-5030-0T
(NFL) † 3 22-1080 -YEL-GRN- 23-1100 -ORANGE- 23-1100 -ORANGE- Not Used
Sharkey’s 090-5030-0T 090-5030-0T
Shootout † 3 23-1100 -ORANGE- SAME 23-1100 -ORANGE- Not Used
High Roller 090-5020-20T 090-5032-0T
Casino † 2 22-900 -YELLOW- 22-1080 -YEL-GRN- Not Used Not Used
Austin 090-5020-30 090-5030-0T
Powers• † 2 23-900 -GREEN- 23-1100 -ORANGE- Not Used Not Used

MONOPOLY® † 090-5032-0T 090-5062-0T

3 22-1080 -YEL-GRN- SAME Not Used 23-1500 -BLUE-
Playboy † 090-5030-0T
2 23-1100 -ORANGE- SAME Not Used Not Used
RollerCoaster 090-5032-0T 090-5067-0T 090-5068-0T
Tycoon• † 4 22-1080 -YEL-GRN- SAME 25-1400 -RED- 25-1600 -WHITE-
6** 090-5032-0T SAME Not Used 090-5030-0T
22-1080 -YEL-GRN- 23-1100 -ORANGE-
The Simpsons• (5 with )OLSSHUV 0LQL%DWV RQ QG /HYHO 3OD\ILHOG
Pinball Party † ** The Homer Head Assembly is affixed to an
Flipper Upr. Rt. Style Flipper ** 090-5020-20T 090-5041-00T 090-5025-00
Bats) (no E.O.S. Switch): 22-900 -YELLOW- 25-1800 -BLU-GRN- 24-1570 -BLUE-
Terminator® 3: 090-5032-0T
Rise of the Machines• † 2 22-1080 -YEL-GRN- SAME Not Used Not Used
The Lord 090-5020-20T
of the Rings• † 2 22-900 -YELLOW- SAME Not Used Not Used
Ripley’s 090-5032-0T 090-5067-00T
Believe It or Not!® † 3 22-1080 -YEL-GRN- SAME Not Used
25-1400 -RED-
Elvis® † 090-5020-20T 090-5020-30
4 22-900 -YELLOW- SAME
23-900 -GREEN-
SAME

The SopranosSM † 090-5032-0T

2 22-1080 -YEL-GRN- SAME Not Used Not Used

NASCAR® and [NDSE] † 090-5030-0T

2 23-1100 -ORANGE- SAME Not Used Not Used
Grand 090-5030-0T
Prix † 2 23-1100 -ORANGE- SAME Not Used Not Used
† Coil Part Numbers ending with a "T" signifies the Diode is on the top of the lug (on the coil-winding side); Coil Part Numbers ending with a "B" signifies the Diode is on the bottom of the lugs.

** S.A.M. System Games DO NOT REQUIRE DIODES. If you use a coil from your stock which has a diode, remove it ONLY FOR S.A.M. System Games.
World Poker Tour• 090-5032-ND 090-5030-ND
(WPT)** 4 22-1080 [ NO DIODE ]
SAME
23-1100 [ NO DIODE ]
SAME
©Disney’s Pirates of the 090-5030-ND
Caribbean** 2 23-1100 [ NO DIODE ] SAME Not Used Not Used
090-5030-ND SAME 090-5062-ND
Family 3 Norm. 23-1100 [ NO DIODE ] 23-1500 [ NO DIODE ]
Not Used
Guy• ** 090-5046-01-ND
2 Mini 27-950 [ NO DIODE ] SAME
Spider- 090-5032-ND 090-5032-ND
Man• ** 3 22-1080 [ NO DIODE ] SAME Not Used
22-1080 [ NO DIODE ]

&RLO&URVV5HI*XLGH $SSHQGL[(
)OLSSHU&RLO7DEOH 
 $33(1',;(
*HQHULF&RLO&URVV5HIHUHQFH*XLGH† ‡

)OLSSHU&RLO7DEOH‡ ††

1ž RI
)/,33(56 Z(26 6ZLWFK )/,33(56 QR (26 6ZLWFK
*$0( 1$0( )OLSSHUV 63, 1ž  *$8*(78516  &RORU 63, 1ž  *$8*(78516  &RORU
/2:(5 /()7 /2:(5 5,*+7 833(5 /()7 833(5 5,*+7
Laser War ‡  090-5011-00
22-750 / 30-2600 SAME Not Used Not Used

Secret Service ‡  090-5006-00

23-620 / 30-2600 SAME Not Used 090-5006-00
23-620 / 30-2600
Torpedo Alley ‡  090-5011-00
22-750 / 30-2600
090-5013-00
23-700 / 30-2600
Not Used 090-5012-00
23-800 / 30-2600
Time Machine ‡  090-5011-00
22-750 / 30-2600
SAME Not Used Not Used
‡ These coils are dual-wound.

Playboy 35th Anniversary ††  090-5020-02

22-900 -YEL-YEL-
SAME Not Used Not Used

ABC Monday Night Football ††  090-5020-02

22-900 -YEL-YEL-
SAME Not Used Not Used
†† A very small % of these games used a 090-5020-20 coil which used a proto-type Solid State Flipper System. The two types of coils both are 22-900 coils; the only difference is the
addition of the 1N5404 Diode on the (-02) coils which was used in the Deger Design.

Robocop  090-5020-20
22-900 -YEL-YEL-
SAME Not Used Not Used

Phantom of the Opera  090-5020-20

22-900 -YEL-YEL-
SAME Not Used Not Used

Back to the Future  090-5020-20

22-900 -YEL-YEL-
SAME Not Used Not Used

The Simpsons  090-5020-20

22-900 -YEL-YEL- SAME Not Used Not Used

Checkpoint  090-5020-20
22-900 -YEL-YEL- SAME Not Used Not Used

Teenage Mutant Ninja Turtles  090-5020-30

23-900 -GRN-GRN- SAME Not Used Not Used

Batman  090-5020-30
23-900 -GRN-GRN- SAME Not Used Not Used

Star Trek 25th Anniversary  090-5020-30

23-900 -GRN-GRN- SAME Not Used Not Used

Hook  090-5030-00
23-1100 -ORG-ORG-
090-5020-30
23-900 -GRN-GRN-
Not Used Not Used

Lethal Weapon 3  090-5030-00

23-1100 -ORG-ORG-
SAME Not Used Not Used

Star Wars  090-5032-00

22-1080 -YEL-GRN-
SAME Not Used Not Used
Rocky & Bullwinkle & Friends
 090-5020-30
23-900 -GRN-GRN-
SAME Not Used Not Used
Jurassic Park
 090-5020-30
23-900 -GRN-GRN-
SAME Not Used 090-5030-00
23-1100 -ORG-ORG-
Table continued on the next page.

$SSHQGL[( &RLO&URVV5HI*XLGH
 )OLSSHU&RLO7DEOH
 $33(1',;(
)OLSSHU&RLO7DEOH†

1ž RI
)/,33(56 Z(26 6ZLWFK )/,33(56 QR (26 6ZLWFK
*$0( 1$0( )OLSSHUV 63, 1ž  *$8*(78516  &RORU 63, 1ž  *$8*(78516  &RORU
/2:(5 /()7 /2:(5 5,*+7 833(5 /()7 833(5 5,*+7
Last Action Hero  090-5020-30
23-900 -GRN-GRN- SAME Not Used Not Used

Tales from the Crypt  090-5032-00

22-1080 -YEL-GRN- SAME Not Used 090-5041-00
25-1800 -BLU-GRN-
The Who’s Tommy  090-5020-30
23-900 -GRN-GRN- SAME 090-5041-00
25-1800 -BLU-GRN- Not Used

WWF Royal Rumble  090-5032-00

22-1080 -YEL-GRN- SAME 090-5041-00
25-1800 -BLU-GRN- SAME

Guns N’ Roses  090-5032-00

22-1080 -YEL-GRN-
SAME 090-5030-00
23-1100 -ORG-ORG- Not Used

Maverick  090-5032-00
22-1080 -YEL-GRN SAME Not Used 090-5032-00
22-1080 -YEL-GRN-
Mary Shelley’s Frankenstein  090-5030-00
23-1100 -ORG-ORG- SAME Not Used 090-5030-00
23-1100 -ORG-ORG-
Baywatch  090-5030-00
23-1100 -ORG-ORG-
090-5020-30
23-900 -GRN-GRN-
090-5025-00
24-1570 -See Note-
090-5030-00
23-1100 -ORG-ORG-
Batman Forever  090-5032-00
22-1080 -YEL-GRN-
090-5020-20
22-900 -YEL-YEL- Not Used 090-5020-30
23-900 -GRN-GRN-
Apollo 13  090-5032-00
22-1080 -YEL-GRN-
SAME Not Used Not Used

Golden Eye  090-5032-00

22-1080 -YEL-GRN- SAME Not Used Not Used

Twister  090-5020-20
22-900 -YEL-YEL-
090-5032-00
22-1080 -YEL-GRN- Not Used Not Used

ID4: Independence Day  090-5032-00

22-1080 -YEL-GRN- SAME Not Used 090-5020-30
23-900 -GRN-GRN-
Space Jam †  090-5032-00T
22-1080 -YEL-GRN-
090-5020-20T
22-900 -YEL-YEL- Not Used Not Used
The Star Wars Trilogy -
Special Edition †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used Not Used

The Lost World: Jurassic Park †  090-5032-00T

22-1080 -YEL-GRN- SAME Not Used Not Used

The X-Files †  090-5032-00T

22-1080 -YEL-GRN- SAME Not Used Not Used

Starship Troopers †  090-5030-00T

23-1100 -ORG-ORG- SAME Not Used 090-5032-00T
22-1080 -YEL-GRN-
Viper Night Drivin’ †  090-5030-00T
23-1100 -ORG-ORG- SAME Not Used Not Used

Lost In Space †  090-5030-00T

23-1100 -ORG-ORG-
090-5032-00T
22-1080 -YEL-GRN- Not Used Not Used

Godzilla †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used Not Used

South Park †  090-5030-00T

23-1100 -ORG-ORG- SAME Not Used Not Used
Harley-Davidson® † and
Harley-Davidson® 2nd Ed. †  090-5032-00T
22-1080 -YEL-GRN-
090-5030-00T
23-1100 -ORG-ORG- Not Used Not Used

Striker Xtreme (NFL) †  090-5032-00T

22-1080 -YEL-GRN-
090-5030-00T
23-1100 -ORG-ORG-
090-5030-00T
23-1100 -ORG-ORG- Not Used

Sharkey’s Shootout †  090-5030-00T

23-1100 -ORG-ORG- SAME 090-5030-00T
23-1100 -ORG-ORG- Not Used

High Roller Casino †  090-5020-20T

22-900 -YEL-YEL-
090-5032-00T
23-1080 -YEL-GRN- Not Used Not Used

Austin Powers• †  090-5020-30

23-900 -GRN-GRN-
090-5030-00T
23-1100 -ORG-ORG- Not Used Not Used

MONOPOLY® †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used 090-5062-00T
23-1500 -BLU-BLU-
Playboy †  090-5030-00T
23-1100 -ORG-ORG- SAME Not Used Not Used

RollerCoaster Tycoon• †  090-5032-00T

22-1080 -YEL-GRN- SAME 090-5067-00T
25-1400 -RED-RED-
090-5068-00T
25-1600 -WHT-WHT
 090-5032-00T SAME Not Used 090-5030-00T
The Simpsons• Pinball Party †  ZLWK *
22-1080 -YEL-GRN-
The Homer Head Assembly is affixed to an
23-1100 -ORG-ORG-
Flippers (Mini-Bats) on 2nd Level Playfield:
)OLSSHU Upr. Rt. Style Flipper * 090-5020-20T 090-5041-00T 090-5025-00T
%DWV (no E.O.S. Switch): 22-900 -YEL-YEL- 25-1800 -BLU-GRN- 24-1570 -See Note-
Terminator® 3:
Rise of the Machines• †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used Not Used

The Lord of the Rings• †  090-5020-20T

22-900 -YEL-YEL- SAME Not Used Not Used
Ripley’s
Believe It or Not!® †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used 090-5067-00T
25-1400 -RED-RED-

† Coil Part Nºs ending with a "T" signifies the Diode is on the top of the lug (on the coil-winding side); Coil Part Nºs ending with a "B" signifies the Diode is on the bottom of the lugs.

&RLO&URVV5HI*XLGH $SSHQGL[(
)OLSSHU&RLO7DEOH 
 $33(1',;)
0RWRU6SHFLILFDWLRQ :KLWH6WDU%RDUG6\VWHP 2QO\ 7DEOH

*DPH 1DPH )XQFWLRQ 6SHFLILFDWLRQV 3DUW 1XPHU

$ _ @ }—›{% •„•\”œ˜œ\––

<= }  ”–‚œ¡”$'}%%¡ '  
ƒ } <  }  '  }—›{% •„•\”›˜†\––
$   ?  •–=”–‚œ¡”$'}%%¡ '  
>_   } –'*„–•{% –›„\•–—“\
„–}'—“•–$'}%¡ Z—ˆ!˜
‹€^ >  @ }—›{% •„•\”•—˜\––
^=$ }  ”–‚œ¡”$'}%¡ '  
>  }  '  }—›{% Œ?K‹XŒQŠ‹ŒŒ •„•\”œ›†\––
 }  •–=”–‚œ¡œ—•$'}%%¡ '  
=œ{_
@ _`Z  }  '  }—›{% Œ?K‹XŒXQ‹ŒŒ •„•\”•œ„\––
‘ ¡ ’ •–=”–‚œ¡œ”––$'}%¡ '  
&‰&€ƒ€‰^   ‚ >} –›„\•–›•\––
? =%  }  “?•QQ Z—ˆ!˜
%#Z ˆZ—™%#$

={_ˆ_=_^   \¡  @ }—›{% Œ?K‹XŒXš‹ŒŒ •„•\”œ˜œ\–„

^=$ }  ”–‚œ¡„–$'}%%¡ '  
> ¤% ^ _ }  '  }—–{% Œ?K‹XŒX“‹Œ• •„•\”†„•\–œ
=${ˆ_€ ^ <= }  “$'}€ \     '  
ž__   } –'*„–•{% –›„\•–—“\
>_ „–}'—“•–$'}%¡ Z—ˆ!˜
=Ÿ  \Z %  }  '  }—–{% –›„\•–•†\––
^ <= }  “$'}%%¡ Z—ˆ!˜
‚ >  ¤   >} •„•\”†“›\––
¡ @ „—{%›”¡ Œ?K‹XŒŠQ‹ŒŒ>  œ”–––‡„›­ '  
{_ƒ=_ƒ_ Z=$ }  ˆ‹'%     ‚>¯œ”˜”›\„— Š¨_ \¥{
™' >‡––›>  ‡„•± •œ–\••–œ\––
–#ˆ‘›—$–ˆ> ˆZ—™%#$

${&ƒ >  }  '  }—›{% Œ?K‹XŒ?Š‹ŒŒ •„•\”œ›†\––

 }  •–=”–‚œ¡œ—•$'}%%¡ '  
‹€¡ >_‡ }  ¯œ˜„„–”œ–}‘{ ’„—{% –›„\•–—“ 
œ„––$'}%¡ @$!—%‡ Z—ˆ!˜
%™—›œ ˆZ—™%#$

>_‡ }  ¯œ˜„„–”œ–}‘{ ’„—{% –›„\•–—“ 

†_^ ‰`€£ œ„––$'}%¡ @$!—%‡ Z—ˆ!˜
K ; •#'' }    —›{% Œ?K‹XŒ”Q‹ŒQ •„•\†–—•\––
^ <= }  —–$'}%%¡ '  
{__Ÿ{_~'$  ‘^  _’ }  ¯œ•“–„—{% Œ?K‹XŒ”X‹ŒŒ •„•\†–†„\––
^$ }  ”–$'} '  
_^ {{ } @ ‚ _ }} \X—›{% Œ?K‹XŒ”Š‹ŒŒ •„•\†–“•\––
$ }  •–=”–‚œ¡—–$'}%¡ '  
$ ¡ }  '  }—–{% Œ?K‹XŒ”š‹ŒŒ •„•\†„•œ\––
$ }  „†$'}%%¡ '  
†Š_ ‚ >  ¤   >} •„•\”†“›\––
<= $ > }  „—{%›”¡ Œ?K‹XŒŠQ‹ŒŒ>  œ”–––‡„›­ '  
^ <= }  ˆ‹'%     ‚>¯œ”˜”›\„— Š¨_¥{\
™' >‡––›>  ‡„•± •œ–\••–œ\–„
 }   }  '  }—›{% Œ?K‹XŒ”“‹ŒŒ •„•\†„›„\––
$ }  •–=”–‚—–$'}%%¡ '  
{œ_• ^ @  }—›{% Œ?K‹XŒšK‹ŒŒ •„•\†„†„\––
^$      •–=”–‚›¡„–$'}@ \     '  
X  ‚ _ }} \X—›{% Œ?K‹XŒ•Œ‹ŒŒ •„•\•“––\––
^ <= }  •–=”–‚”$'}%%¡ '  
Œƒ^£ } \Z ‘¡_ ’ }  '}¤@`¯†–––X ––„•“ –›„\•–˜œ\––
$ }  —–{%•–=”–‚˜•$'}%%=%%¡ Z—ˆ!˜
   @   } $XKKKXŒ‹K•š”—›{% –›„\•–˜”\–—
$ }  •–=”–‚„—$'}@ \     Z—ˆ!˜
%  }   }  '   •ŠšŒ}„—% –›„\•–†•\–›
^^ ? =%  }  „–=„—$'}%%=%%¡ Z—ˆ!˜
‚ >  ¤   >} •„•\”†“›\––
 >  „—{%›”¡ Œ?K‹XŒŠQ‹ŒŒ>  œ”–––‡„›­ '  
^ <= }  ˆ‹'%     ‚>¯œ”˜”›\„— Š¨_ \¥{
™' >‡––›>  ‡„•± •œ–\••–œ\––
‡>* Y‹ŒKY%  Z'>` @' %  ZŒ?K‹XŒQ“## %  Z XKX‹Xš“•‹ŒŒ
—›%ˆ#Z—ˆˆ!˜#™%#$ˆˆ#%›œ#Z—%%˜XKX‹Xš“•#!
?      • 

$SSHQGL[) 0RWRU6SHFLILFDWLRQ
 7DEOH
 $33(1',;)
0RWRU6SHFLILFDWLRQ :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH

*DPH 1DPH )XQFWLRQ 6SHFLILFDWLRQV 3DUW 1XPEHU

ROLLERCOASTER TYCOON• (NO MOTOR USED)
THE SIMPSONS• PINBALL PARTY (NO MOTOR USED)
Terminator® 3: Backbox Ball Shooter Multi Products Motor 24VAC (041-5079-01) 515-7317-00
Rise of the Machines• Up/Down Movement 21 RPM CW incl. Connector

The Lord of the Rings• Balrog (Motor & Gate) Multi Prod. Motor 20VDC Series 600B (or equiv.) 041-5088-01
Open/Close Movement 50/60Hz 10 RPM Bi-Directional MOTOR ONLY
RIPLEY’S BELIEVE IT OR NOT!® (NO MOTOR USED)
Haydon Switch & Instrument, Inc. Stepper Motor 500-6809-00
Elvis• 12VDC 10W (041-5089-00), incl. Connector
Front/Back Movement (Non-Captive Shaft not included) Requires 7.25" Shaft:
Elvis® HSI #46868-12-002 530-5658-00
::: OPTIONAL 999 Multi #3811 0630 Motor (Vibrator) 12VDC 515-5893-01
Shaker (041-5029-01) 3100 RPM (w/DRL PTS) incl. Connector
The Sopranos SM Bada Bing! Girls x2 Autotrol Synchronous Motor 24VAC 4W 041-5092-00
Rotating Posts Movement 50/60Hz 45.7/54.9 RPM Bi-Directional w/1" Shaft + 12" Leads

NASCAR® and [NDSE] Back Panel Rotating (Car) Multi Products Motor & Gear Box 20VDC 041-5093-00
Windmill (Skill Ball Enter) Model #8000 (EX-04-073) 10 RPM MOTOR ONLY
Grand Prix Back Panel Rotating (Car) Multi Products Motor & Gear Box 20VDC 041-5093-00
Windmill (Skill Ball Enter) Model #8000 (EX-04-073) 10 RPM MOTOR ONLY

World Poker Tour• (WPT) (NO MOTOR USED)

Bart on Skateboard Multi Products Motor with Crank 24VAC 500-6947-01
Left/Right Movement (041-5095-01) 50/60Hz 3W 14 RPM incl. Connector
The Simpons• Left & Right Ramps Multi Products Motor 24VAC (041-5048-01) 515-7558-00
Kooky Carnival Up/Down Movement 50/60Hz 3W 15 RPM CCW (Qty. 2 in game) incl. Connector
Shaker Multi #3811 0630 Motor (Vibrator) 12VDC 041-5029-01
(details in SKC Manual, Page 24) 3100 RPM (w/DRL PTS) MOTOR ONLY
Multi #3811R 0630 Motor (Vibrator) 12VDC
Spinning
(041-5029-04) 3100 RPM (w/DRL PTS) 511-5024-04
©Disney’s Pirates Disk
-04 is RoHS compliant; can substitute with -01 domestic incl. Connector
of the Caribbean Pirate Ship Multi Products Motor & Gear Box 24VDC 041-5101-00
Sinking/Raising Movement Model #7000-DCM 12 RPM MOTOR ONLY
Family Guy• Stewie Figurine Stepper Motor NPM PF35T-48D4STD 5V RVB 511-5043-00
Left & Right Movement (041-5102-00 Reference Only) incl. Connector
Doc Ock, Sandman & 3-Bank Sync. Motor 24VAC 50/60Hz 3W 12 RPM CW 511-5063-00
Up/Down Movement (041-5103-00 Reference Only) incl. Connector
Spider-Man• ::: OPTIONAL 999 Multi #3811R 0630 Motor (Vibrator) 12VDC
515-5893-01
Shaker Motor Kit (041-5029-04) 3100 RPM (w/DRL PTS)
502-5027-00 -04 is RoHS compliant; can substitute with -01 domestic incl. Connector

0RWRU6SHFLILFDWLRQ $SSHQGL[)
7DEOH 
 $33(1',;)
0RWRU6SHFLILFDWLRQ7DEOH
The following table only list games that used motors. Part Numbers starting with "515-" will include the Wiring Harness & Connector.
*DPH 1DPH )XQFWLRQ 6SHFLILFDWLRQV 3DUW 1ž
Goal Post Motor 24v A.C.
ABC Monday Night Football Up/Down Movement 60 RPM CW 515-5222-00
Organ Bowman Motor 24v
Phantom of the Opera Up/Down Movement 60Hz 3W 11 RPM CCW 515-5256-00
Mag Wheel
(in Backbox) Motor D.C. (KEN) 041-5005-00
Checkpoint
Johnson Motor
Shaker (Vibrator) 041-5002-00
Spinning Pizza Ball Gear Motor 24v A.C.
Teenage Mutant Ninja Turtles Deflector 325 RPM CW 515-5397-00
Bar Target Bowman Motor 24v
Batman Up/Down Movement 60Hz 3W 11 RPM CCW 515-5256-00
Bowman Motor 24v
Swinging Target
221e2 RPM 515-5534-00
Star Trek 25th Anniversary Gear Motor 24v A.C.
Transporter F/X
31e2 RPM 500-5421-00
Cooling Fan 41e2" Motor 12v
(for Transporter F/X) 041-5014-00
Motor 21e2
v A.C.
Lethal Weapon 3 Spinning Light
4000 RPM CCW 041-5017-00
Bar Target Bowman Motor 24v
Up/Down Movement 60hz 3W 11 RPM CCW 515-5256-00
Star Wars R2D2 Robot Bowman Motor 24v A.C.
Left/Right Movement 221e2 RPM CW 515-5571-00
Death Star Bowman "G" Motor 24v A.C.
Rotation 60Hz 6 RPM CW 515-5570-00
Nell Log "Cutting Blade" Autotrol Model E Motor 24v
Rocky & Bullwinkle & Friends Forward/Back Movement 60hz 4W 3 RPM CCW 041-5023-00
T-Rex Multi Motor 5v D.C.
Left/Right Movement 041-5025-00
Jurassic Park T-Rex Bowman Motor 24v
Up/Down Movement 11 RPM CW 041-5026-00
Johnson Motor
Shaker
(Vibrator) 041-5002-00
Crane Multi Products Motor 12v D.C.
Left/Right Movement #3312 OSC 041-5027-00
Last Action Hero
Johnson Motor (Vibrator) 10.5v D.C.
Shaker 10 AMP 2950 RPM CW 041-5029-00
Tombstone Bowman Motor 24v A.C.
Up/Down Movement 6 RPM CCW 515-5900-00
Tales from the Crypt
Johnson Motor (Vibrator) 10.5v D.C.
Shaker
10 AMP 2950 RPM CW 041-5029-00
Mirror Bowman Motor 24v A.C.
Up/Down Movement 6 RPM CCW 515-5900-00
The Who’s Tommy Servo Motor
Flipper Blinders (94102) 041-5032-00
Spinning Airplane
Propellers Motor D.C. 041-5033-00
Johnson Motor (Vibrator) 10.5v D.C.
WWF Royal Rumble Shaker
10 AMP 2950 RPM CW 041-5029-00
Motor 24v A.C.
Maverick, The Movie Turning Paddle Wheel
10 RPM 041-5036-00
Creature Head
Mary Shelley’s Frankenstein Left/Right Movement Servo Motor (94102) 041-5032-00
Cannon Bowman Motor 24v A.C.
Batman Forever Left/Right Movement 60Hz 3W 6 RPM CCW 515-6383-00

$SSHQGL[) 0RWRU6SHFLILFDWLRQ
 7DEOH
 $33(1',;*
3DUW1XPEHU3UHIL[&ODVVLILFDWLRQ&RGHV
I. Electrical Source, Energy & Signal Converters VI. Handles, Locks, Catches, Latches, Keys
010- Transformers 355- Handles, Locks, Catches, Latches
031- Speakers and Keys
090- Solenoids (Coils)
150- Filters, Outlets, Varistors, Thermistors VII. Fabricated Parts
200- Fuses 390- Hinges
501- Coin Doors
II. Conductors, Connectors & Insulators 515- Sub-Assemblies
034- Line Cords 520- Printed Circuit Boards (PCBs)
036- Cable Assemblies & Wiring Harnesses 522- Display Glass
041- Motors 525- Wood Parts
045- Connectors (All Types) 530- Screw Machined Parts
055- Lugs (M/F), Pins (M/F), Discs, 535- Fabricated Parts
Ring Terminals, 545- Molded (Extruded) Plastic and
Terminal Strips, etc. Rubber Parts (Rings, Sleeves, etc.)
060- Polarizing Keys and Conn. Covers 550- Molded (Inserts)
077- Lamp Sockets
VIII. In-House Assemblies
III. Circuits & Circuit Elements 500- End Product (Systems and Models)
100- ICs 502- Kits (Created In-House)
110- Transistors 505- Cabinets (complete)
112- Diodes (All Types including LEDs & Modules) 510- Riveted Sub-Assemblies (In-House)
121- Resistors 511- Sub-Assemblies (In-House)
123- Resistors (Variable & Adjustable) 515- Sub-Assemblies*
124- Regulators & Bridge Rectifiers *2 or more 515-’s but still a sub-assembly.
125- Capacitors (Radial Lytics & Ferrites)
126- Piezo Crystal IX. Bulk Materials
127- Heatsinks 600- Braided Wire & Ground Straps
130- Capacitors (Tecates & Ceramics) 601- Stranded Wire
140- Oscillators (Clocks/Crystals) 602- Ribbon Cable
165- Light Bulbs 604- Telephone Line Cord
180- Switches 605- Sleeving (Shrink Tubing)
181- Switch Membranes (Pads) & Piezo Sensors 625- Velcro (non-adhesive)
190- Relays 626- Foam Rubber, Foam Pads, Rubber
960- EPROM (Raw Part) Bumpers (Blue Pads), Tape (All Types)
965- EPROM (Programmed Part) Velcro (adhesive) and String / Rope
IV. Bolts, Screws, Nuts, Washers & Nails X. Miscellaneous
231- Bolts 000- Tools (see also 777-) and Supplies
232- Screws (Pan Head) 040- Clamps, Ties & Clips
234- Screws (HWH) 042- Pulleys
237- Screws (Misc.) 091- Coin Mechs
240- Nuts (Misc.) 205- Fuse Holders
242- Washers (Flat, Round) 631- Staples
244- Washers (Split Lock) 660- Glass (Playfield, Backglass, etc.)
245- Nyliners 675- Cleaners
246- Washers (Lockers, External Tooth) 705- Packing & Shipping Items
281- Nails 755- Instruction, Coin Cards, Ins. Sheets
756- Information Sheets, Service Bulletins,
V. Mechanical Components Instruction Sheets in Kits and Templates
249- Rivets 777- Tools (Wrenches and Drivers)
251- Pins (Dowel), Finishing Nails, Hairpins, 780- Manuals
Spring Pins and Clevis Pins 802- Decal Kits (comprised of 820’s)
254- Stand-Offs, Spacers and Shims 820- Decals, Mylar and Labels (Sheets/Sets)
260- Steel Ball (All Types Steel, Glowing, Delrin, etc.) 803- Plastic Kits (comprised of 830’s)
265- Springs (Extension) 830- Plastic Pieces (Butyrate Sheets/Sets)
266- Springs (Compression) 880- Toys, Models, Figurines, etc.
267- Springs (Torsion) 900- Game Posters
269- Springs (Washers - Belleville, Wave)
270- Retaining Rings
280- Grommets, Bushings and Nyliners
283- Bearings

$SSHQGL[* 3DUW1XPEHU3UHIL[
 &ODVVLILFDWLRQ&RGHV
 $33(1',;+
3OD\ILHOG,QVHUWV 3ODVWLF/LJKW&RYHUV

{{_ =Š; Š= =Š; Š= =Š; Š= =Š; Š= =Š; Š=
=Š; Š= &Š $Š &Š $Š &Š $Š &Š $Š &Š $Š

•e˜\ª œe›\ª \ª  œ’„”\ª  „e—\ª

=&$

  ŸŸ   ŸŸ   ŸŸ   ŸŸ   ŸŸ

=Š; Š= =Š; Š= $&' $&' $&' $&'
&Š $Š &Š $Š &Š $Š &Š $Š &Š $Š &Š $Š

 „e›\ª  œe›\ª œe›\ª \ª  œ’„”\ª  „e—\ª

  ŸŸ   ŸŸ   ŸŸ   ŸŸ  › ŸŸ   ŸŸ

$&' $&' =&$ =&$ Š‡$$‡Š ˆ†&==Š
&Š $Š &Š $Š &Š $Š \« Š ; ==‡';  '@ '

 „e›\ª  œe›\ª \ª —\

  ŸŸ   ŸŸ   ŸŸ  › ŸŸ   ŸŸ   

=&$ =&$ =Š; Š= $&' $&' $&'
Š='‹ $Š Š='‹ $Š Š='‹ $Š Š='‹ $Š Š='‹ $Š Š='‹ $Š

 „e—\Ÿœe›\  •e˜\Ÿ „e—\  „e›\Ÿ „e˜\  „e›\Ÿ „e˜\  „e›\Ÿ „e—\ \Ÿ „e—\

  ŸŸ    ŸŸ   ŸŸ  › ŸŸ    ŸŸ   ŸŸ

=Š; Š= =Š; Š= Œ&'& ;$ $&' ;''
Œ&'&†&$‰ $Š‹†&$‰ †‡=‰‡‹ †‡=‰‡‹ †‡=‰‡‹

\Ÿ\  •’˜\ „e—\ „e—\

  ŸŸ   ŸŸ   ŸŸ   ŸŸ   ŸŸ   ŸŸ

=Š; Š= =Š; Š= =Š; Š= =Š; Š= =Š; Š= =Š; Š=
ŠŠ‡ˆ Œ$$ ŠŠ‡ˆ $Š‹ ŠŠ‡ˆ †‰ ŠŠ‡ˆ †‰ ; $$= =Š&'‹$
Œ$$ $Š‹

  ŸŸ    ŸŸ   ŸŸ   ŸŸ   ŸŸ   ŸŸ
>* —  ' @* %J J ;*'*'  
   * '         ‘           ’  —\    
     ŸŸ               
 —\           ˆ J *'*

3/$67,& 3$57 &2/25 &+$57

1¬ &RORU 1¬ &RORU 1¬ &RORU 1¬ &RORU 1¬ &RORU 1¬ &RORU
 ;> %     §  › '   Z @   ^   
 %     ?   Z ?       
 $  @   ¡   Z      @

3OD\ILHOG,QVHUWV $SSHQGL[+
3ODVWLF/LJKW&RYHUV 
 $33(1',;,
6WDQG8S7DUJHWV

$SSHQGL[, 6WDQG8S
 7DUJHWV
 $33(1',;,
0RGX ODU6WDQG8S7DUJHWV
Š
² 7R5HSODFHWKH©7DUJHW,QVHUWª
 ³ RUFKDQJH7DUJHW2ULHQWDWLRQ
5  
   ;0>*Z   \  \>''
$ €‘ ’   '     
}     ² ³²+Ÿ'J ˜+˜
      ˆJ*%%'–'@' 
J  ' @;Z~ ²
 ³ \  \>''€

}  •  ˆ   –ˆ^ — Š

Œ  __`_   ‰‡  ?  
__      `   `? ? ‰
_      ? ™™   _‰

   „
^?    ?  
  __ 
 €`? ‚ ‡ ?
7DNH1RWH _ `  ?   
„ &{~        —  _‰ 
;J *'*'  
\ ŸŸ\      
 —\      
    % % 
'< @'; @‰
% ‘’| $‘@%X’|  ‘X’|
 ‘@’|  @ ‘%’| § ‘%’
›' ‘@’| Z    ‘@’
— Ž '  %‹™
—;<' <% '{< !<
'' 'ž! '

 ='‰ =Š‹=Š= ?'?@} 

} > \<€  •––\”„œ˜\
 > \<€‘ ’    ŸŸ
} > \<>  •––\”„œ“\
; > \<>‘ ’   › ŸŸ ‚ _   ?   ?     _
} > \<$     •––\”——˜\
 > \<$   ‘ ’   ŸŸ
_  ?   _‰ @  
} > \<$   •––\”–†•\
‰ > \<$ ‘ ’   Z   @  '|  ' ''Š| 
  ŸŸ

}> \<„>    •––\”„˜“\ Z'    Z‹<%'*„   
> \<„>  ‘ ’  › ŸŸ

6WDQG8S $SSHQGL[,
7DUJHWV 
 $33(1',;-
&RLQ&DUGV 86$ ,QWHUQDWLRQDO3ULFLQJ'HIDXOWV X)RU<HOORZ6WRFNDGG<WRWKH3DUW1XPEHU
If more than one Pricing Scheme is available for countries listed, the F. listed beside the option, denotes the Factory Default Setting.
FOR VIEWS OF THE LATEST or OPTIONAL USA, INTERNATIONAL / EURO AND CUSTOM COIN CARDS, VISIT OUR WEBSITE.
Not Shown USA 755-5400-10 Tournament Option $2 = X1; 755-5400-11 Tournament Option $1.50 = X1

USA 10 F. USA 10 USA 2-7 or CANADA FOR CUSTOM PRICING † USA 3 with ToPS• USA 5 with ToPS•
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5400-11 Front 755-5400-11 Back 755-5400-02 Front 755-5400-01, -02 or -04 Back 755-5400-03 or -09 Front 755-5400-03 Back / -08 Front
AUSTRALIA 1 F. AUSTRALIA 2 CROATIA FOR CUSTOM PRICING † DENMARK 1 F. DENMARK 2
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5406-00 Front 755-5406-00 Back 755-5410-00 Front 755-5410-00 Back 755-5402-00 Front 755-5402-00 Back
JAPAN 1 JAPAN 2 F. MIDDLE EAST ANY COUNTRY CAN USE NEW ZEALAND 1 F. NEW ZEALAND 2

755-5408-01 Front 755-5408-01 Back 755-5400-06 Front 755-5400-06 Back 755-5406-00 Back 755-5406-00 Front
NORWAY 1 F. NORWAY 2 RUSSIA F. RUSSIA (ALTERNATE) SOUTH AFRICA FOR CUSTOM PRICING †
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5403-01 Front 755-5403-01 Back 755-5411-00 Front 755-5411-00 Back 755-5409-01 Front 755-5409-01 Back
SWEDEN 1 F. SWEDEN 2 SWITZERLAND 1 F. SWITZERLAND 2 TAIWAN FOR CUSTOM PRICING †
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5404-00 Front 755-5404-00 Back 755-5405-00 Front 755-5405-00 Back 755-5412-00 Front 755-5412-00 Back
UK 1 UK 3 UK 5 F. FOR CUSTOM PRICING † Appendix J Notes:
1. Coin Card on Game is determined by original shipping
Backside is Blank country destination.
(Border Only) 2. Optional Coin Card(s), are available via your distributor or via
free download @ www.sternpinball.com/coinagecards.shtml.
Typeset your Older style Coin Cards (foreign or domestic) not available
Custom Pricing on our website or no longer available through your
distributor, are obsolete.
755-5407-00 Front 755-5407-00 Back 755-5407-01 Front 755-5407-01 Back 3. Coin Cards which have a Blank Backside can be used for
Not Shown EURO 755-5401-20 Tournament Custom (can fill in your own pricing). †Custom Pricing.

EURO 1 EURO 2 EURO 3 EURO 4 EURO 5 EURO 6

755-5401-01 1-Side Only 755-5401-02 1-Side Only 755-5401-03 1-Side Only 755-5401-04 1-Side Only 755-5401-05 1-Side Only 755-5401-06 1-Side Only
EURO 7 EURO 8 EURO 9 EURO 10 EURO 11 EURO 12

755-5401-07 1-Side Only 755-5401-08 1-Side Only 755-5401-09 1-Side Only 755-5401-10 1-Side Only 755-5401-11 1-Side Only 755-5401-12 1-Side Only
[(852)$&725<'()$8/76800$5<7$%/(\
EURO 1 EURO 2 EURO 3 EURO 4 EURO 5 EURO 6 EURO 7 EURO 8 EURO 9 EURO 10 EURO 11 EURO 12
BELGIUM GERMANY 2 NETHERLANDS GREECE FINLAND AUSTRIA FRANCE
ITALY 1 SPAIN
PORTUGAL

Section 3, Chapter 4, GO TO ADJUSTMENTS MENU, Adj. 18, Game Pricing, USA & International (non-Euro) and Euro 1-12 Summary &
International (Euro) Standard Pricing Select Tables, summarizes Standard or Custom Pricing Schemes & the Dip Switch Setting required.

$SSHQGL[- &RLQ&DUGV 86$

 ,QWQ·O3ULFLQJ'HIDXOWV
 $33(1',;$
3LQEDOO*DPH)LUPZDUH :KLWH6WDU%RDUG6\VWHP 2QO\ 7DEOH
6HH ZHEVLWH IRU WKH ODWHVW ,QWHUQDWLRQDO &RGH RU 8SGDWHG 86$ YHUVLRQ  FKHFNVXPV
&KLS 3URJUDP 86$ '07 %G 5DZ &KLS 3URJUDP 86$ '07 %G 5DZ
520 6L]H 3DUW 1ž &KHFN 6XP /RF 3DUW 1ž 520 6L]H 3DUW 1ž &KHFN 6XP /RF 3DUW 1ž
†_^ ‰`€£'{‘ ‘K !_##!%
$?} ‘„}’ “”•\–œ„“\”†   ™š   “”–\•––“\––
>  ‘•„—ƒ’ “”•\–œ—–\”† {„––™šZ›ZZ <† “”–\†––„\–—
   ‘›}’ “”•\–œ—„\”†  ™š  Š‡Œ “”–\•–„•\–„
{ „ ‘˜}’ “”•\–œ——\”† {„––™š%—” <„† “”–\•–„”\––
{ — ‘˜}’ “”•\–œ—œ\”† {„––™š“œ“” <—„ “”–\•–„”\––
{ œ ‘˜}’ “”•\–œ—›\”† {„––™šZ@†— <œ” “”–\•–„”\––
{ › ‘›}’ “”•\–œ—•\”† {„––™š”„–– <œ† “”–\•–„•\–„

 ‘’ !{

  ^
:†_^ ‰`€£'{‘ ‘‘_ 0   _##__##%


ƒ '{ $?} ‘„}’ “”•\–œ„“\”†  ™š   “”–\•––“\––
$?} ‘„}’ “”•\–—–˜\––  ™š›  “”–\•––“\––    ‘›}’ “”•\–œ—„\”†   ™š; › Š‡Œ “”–\•–„•\–„
>  ‘•„—ƒ’ “”•\–—„—\–– {„––™š•—›› <† “”–\†––„\–—
:†_^ ‰`€£'{‘

<“K
   ‘›}’ “”•\–—„œ\––  ™š;›; Š‡Œ “”–\•–„•\–„ ‘‘ 0   _##{%
{ „ ‘›}’ “”•\–—–“\–– {„––™š†Z%† <„† =‘ _’ $?} ‘„}’ “”•\–œ„“\˜†  ™š  “”–\•––“\––
{ — ‘›}’ “”•\–—„–\–– {„––™š˜X•• <—„ =‘ _’    ‘›}’ “”•\–œ—„\˜†  ™š “”–\•–„•\–„
{ œ ‘›}’ “”•\–—„„\–– {„––™š–˜XX <œ” =‘ _’

‹€^'{ {__Ÿ{_~'{‘ 
$?} ‘„}’ “”•\–œ—”\”˜   ™š  “”–\•––“\––
$?} ‘„}’ “”•\–—„›\›—  ™š   “”–\•––“\–– >  ‘•„—ƒ’ “”•\–œ—†\”˜ {„––™šœ@% <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–—„†\›— {„––™š”„• <† “”–\†––„\–—    ‘›}’ “”•\–œ—˜\”˜   ™š› Š‡Œ “”–\•–„•\–„
   ‘›}’ “”•\–—„˜\›—  ™š‰ Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ—“\”˜ {„––™š›˜— <„† “”–\•–„”\––
{ „ ‘›}’ “”•\–—„•\›— {„––™šœXœ— <„† =‘ _’ { — ‘˜}’ “”•\–œœ–\”˜ {„––™š†œ„— <—„ “”–\•–„”\––
{ — ‘›}’ “”•\–—„”\›— {„––™š†„Z– <—„ =‘ _’ { œ ‘˜}’ “”•\–œœ„\”˜ {„––™šX—Z <œ” “”–\•–„”\––
{ › ‘˜}’ “”•\–œœ—\”˜ {„––™š%•–˜ <œ† “”–\•–„”\––
=œ{_'{
$?} ‘„}’ “”•\–—„“\›„   ™š›  “”–\•––“\–– '$'{‘ ^'<_`{   \< Z|_  Z}'
>  ‘•„—ƒ’ “”•\–——„\›„ {„––™š„ZZZ <† “”–\†––„\–— $?} ‘„}’ “”•\–œœ“\†œ  ™š‰  “”–\•––“\––
   ‘›}’ “”•\–———\›„  ™š‰ Š‡Œ “”–\•–„•\–„ >  ‘•„—ƒ’ “”•\–œ›–\†œ {„––™š <† “”–\†––„\–—
{ „ ‘›}’ “”•\–——–\›„ {„––™šœ”•– <„† “”–\•–„•\–„    ‘›}’ “”•\–œ›„\†œ  ™š  Š‡Œ “”–\•–„•\–„
{ — ‘›}’ “”•\–——œ\›„ {„––™š“œ–– <—„ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ›—\†œ {„––™š <„† “”–\•–„”\––
{ — ‘˜}’ “”•\–œ›œ\†œ {„––™š <—„ “”–\•–„”\––
&‰&€ƒ€‰^'{ { œ ‘˜}’ “”•\–œ››\†œ {„––™š <œ” “”–\•–„”\––
{ › ‘˜}’ “”•\–œ›•\†œ {„––™š <œ† “”–\•–„”\––
$?} ‘„}’ “”•\–——›\›•  ™š›  “”–\•––“\––
>  ‘•„—ƒ’ “”•\–——†\›• {„––™š———@ <† “”–\†––„\–—
   ‘›}’ “”•\–——˜\›•  ™š; Š‡Œ “”–\•–„•\–„ _^ {{'{‘ 
{ „ ‘›}’ “”•\–——•\›• {„––™šœX„ <„† “”–\•–„•\–„ $?} ‘„}’ “”•\–œœœ\†—  ™š›  “”–\•––“\––
{ — ‘›}’ “”•\–——”\›• {„––™š—–”X <—„ “”–\•–„•\–„ >  ‘•„—ƒ’ “”•\–œœ›\†— {„–„™š“†“” <† “”–\†––„\–—
   ‘›}’ “”•\–œœ•\†—  ™š Š‡Œ “”–\•–„•\–„
ƒž~'{ { „ ‘˜}’ “”•\–œœ”\†— {„––™š•˜X <„† “”–\•–„”\––
{ — ‘˜}’ “”•\–œœ†\†— {„––™š—†—@ <—„ “”–\•–„”\––
$?} ‘„}’ “”•\–——“\›œ  ™š  “”–\•––“\–– { œ ‘˜}’ “”•\–œœ˜\†— {„––™š›„X <œ” “”–\•–„”\––
>  ‘•„—ƒ’ “”•\–—œœ\›œ {„––™šZ„X† <† “”–\†––„\–—
   ‘›}’ “”•\–—œ›\›œ  ™š Š‡Œ “”–\•–„•\–„
{ „ ‘›}’ “”•\–—œ–\›œ {„––™š@˜ <„† “”–\•–„•\–„ †Š_'{‘ 
{ — ‘›}’ “”•\–—œ„\›œ {„––™šZ„ <—„ “”–\•–„•\–„ $?} ‘„}’ “”•\–œ›”\”•  ™š›  “”–\•––“\––
{ œ ‘›}’ “”•\–—œ—\›œ {„––™šZœ— <œ” “”–\•–„•\–„ >  ‘•„—ƒ’ “”•\–œ›†\”• {„––™š•˜„% <† “”–\†––„\–—
   ‘›}’ “”•\–œ›˜\”•  ™š ; Š‡Œ “”–\•–„•\–„
={_ˆ_=_^ ƒ€{  '{ { „ ‘˜}’ “”•\–œ›“\”• {„––™šX„— <„† “”–\•–„”\––
{ — ‘˜}’ “”•\–œ•–\”• {„––™šœ˜Z› <—„ “”–\•–„”\––
$?} ‘„}’ “”•\–—œ•\•”   ™š   “”–\•––“\–– { œ ‘˜}’ “”•\–œ•„\”• {„––™š„@•› <œ” “”–\•–„”\––
>  ‘•„—ƒ’ “”•\–—œ˜\•” {„––™š›† <† “”–\†––„\–— { › ‘˜}’ “”•\–œ•—\”• {„––™š†—– <œ† “”–\•–„”\––
   ‘›}’ “”•\–—œ“\•”  ™š Š‡Œ “”–\•–„•\–„
{ „ ‘›}’ “”•\–—œ”\•” {„––™šX””@ <„† “”–\•–„•\–„
{ — ‘›}’ “”•\–—œ†\•” {„––™š˜Z•› <—„ “”–\•–„•\–„ {œ_• '{‘ 
$?} ‘„}’ “”•\–œ•œ\†›  ™š ‰  “”–\•––“\––
=${ˆ_€ž__'{ >  ‘•„—ƒ’ “”•\–œ•›\†› {„––™š†@ <† “”–\†––„\–—
   ‘›}’ “”•\––œ•\†›  ™š  Š‡Œ “”–\•–„•\–„
$?} ‘„}’ “”•\–—›–\•œ  ™š  “”–\•––“\–– { „ ‘˜}’ “”•\–œ•”\†› {„––™š—@“ <„† “”–\•–„”\––
>  ‘•„—ƒ’ “”•\–—›œ\•œ {„––™šœ•@ <† “”–\†––„\–— { — ‘˜}’ “”•\–œ•†\†› {„––™š“X†• <—„ “”–\•–„”\––
   ‘›}’ “”•\–—››\•œ  ™š  Š‡Œ “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ•˜\†› {„––™š•„Zœ <œ” “”–\•–„”\––
{ „ ‘›}’ “”•\–—›„\•œ {„––™š„—† <„† “”–\•–„•\–„ { › ‘˜}’ “”•\–œ•“\†› {„––™š–X• <œ† “”–\•–„”\––
{ — ‘›}’ “”•\–—›—\•œ {„––™š˜› <—„ “”–\•–„•\–„

=Ÿ '{ Œ‡'‡‡$¤£'{‘ 

$?} ‘„}’ “”•\–œ”–\†•  ™š   “”–\•––“\––
$?} ‘„}’ “”•\–—›•\›”   ™š  “”–\•––“\–– >  ‘•„—ƒ’ “”•\–œ”„\†• {„––™š˜%„˜ <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–—›˜\›” {„––™š””›˜ <† “”–\†––„\–—    ‘›}’ “”•\–œ”—\†•  ™š  Š‡Œ “”–\•–„•\–„
   ‘›}’ “”•\–—›“\›”  ™š‰ Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ”œ\†• {„––™šœ•X” <„† “”–\•–„”\––
{ „ ‘›}’ “”•\–—›”\›” {„––™šœ›“ <„† “”–\•–„•\–„ { — ‘˜}’ “”•\–œ”›\†• {„––™š@œ• <—„ “”–\•–„”\––
{ — ‘›}’ “”•\–—›†\›” {„––™š”—“% <—„ “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ”•\†• {„––™š˜“Z <œ” “”–\•–„”\––
{_ƒ=_ƒ_'{  ^^'{‘ ‘ 
$?} ‘„}’ “”•\–—•–\•“  ™š   “”–\•––“\–– $?} ‘„}’ “”•\–œ”†\†”  ™š ‰  “”–\•––“\––
>  ‘•„—ƒ’ “”•\–—•œ\•“ {„––™š”›@— <† “”–\†––„\–— >  ‘•„—ƒ’ “”•\–œ”˜\†” {„–—™šX†%— <† “”–\†––„\–—
   ‘›}’ “”•\–—•›\•“  ™š ; Š‡Œ “”–\•–„•\–„    ‘›}’ “”•\–œ”“\†”  ™š  Š‡Œ “”–\•–„•\–„
{ „ ‘›}’ “”•\–—•„\•“ {„––™š„•— <„† “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ†–\†” {„––™š“@X <„† “”–\•–„”\––
{ — ‘›}’ “”•\–—•—\•“ {„––™š–—“„ <—„ “”–\•–„•\–„ { — ‘˜}’ “”•\–œ†„\†” {„––™š“Zœ› <—„ “”–\•–„”\––
{ œ ‘›}’ “”•\–—••\•“ {„––™š“•† <œ” “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ†—\†” {„––™šœ†›@ <œ” “”–\•–„”\––
{ › ‘˜}’ “”•\–œ†œ\†” {„––™š—œ† <œ† “”–\•–„”\––
ƒ_'{‰_` '{
$?} ‘„}’ “”•\–—””\œ•  ™š   “”–\•––“\–– Š_{_=^• '{‘ ‘ 
>  ‘•„—ƒ’ “”•\–—†„\œ• {„––™š›Z˜ <† “”–\†––„\–— >  ‘•„—ƒ’ “”•\–œ†›\†˜ {„––™šZ””œ <† “”–\†––„\–—
   ‘›}’ “”•\–—†—\œ•  ™š ‰ Š‡Œ “”–\•–„•\–„ $?} ‘„}’ “”•\–œ†•\†˜  ™š   “”–\•––“\––
{ „ ‘›}’ “”•\–—”†\œ• {„––™š˜–„˜ <„† “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ††\†˜ {„––™šœ%› <„† “”–\•–„”\––
{ — ‘›}’ “”•\–—”˜\œ• {„––™š—„•† <—„ “”–\•–„•\–„ { — ‘˜}’ “”•\–œ†˜\†˜ {„––™š–•† <—„ “”–\•–„”\––
{ œ ‘›}’ “”•\–—”“\œ• {„––™š@•” <œ” “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ†“\†˜ {„––™š–›† <œ” “”–\•–„”\––
{ › ‘›}’ “”•\–—†–\œ• {„––™š–„X <œ† “”–\•–„•\–„    ‘›}’ “”•\–œ†”\†˜  ™š‰‰;  %  
${&ƒ'{ =~ƒ• _{^'{‘ ‘ 
$?} ‘„}’ “”•\–—˜—\”–  ™š;  “”–\•––“\–– >  ‘•„—ƒ’ “”•\–œ˜„\†† {„–„™š†XX <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–—˜†\”– {„––™š”Z <† “”–\†––„\–— $?} ‘„}’ “”•\–œ˜—\††  ™š  “”–\•––“\––
   ‘›}’ “”•\–—˜˜\”–  ™š ; Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ˜œ\†† {„––™š“†„“ <„† “”–\•–„”\––
{ „ ‘›}’ “”•\–—˜œ\”– {„––™š›œ“„ <„† “”–\•–„•\–„ { — ‘˜}’ “”•\–œ˜›\†† {„––™š„”X <—„ “”–\•–„”\––
{ — ‘›}’ “”•\–—˜›\”– {„––™š˜—„• <—„ “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ˜•\†† {„––™š%X <œ” “”–\•–„”\––
{ œ ‘›}’ “”•\–—˜•\”– {„––™š•@œ— <œ” “”–\•–„•\–„ { › ‘˜}’ “”•\–œ˜”\†† {„––™šX†X• <œ† “”–\•–„”\––
{ › ‘›}’ “”•\–—˜”\”– {„––™š˜“†„ <œ† “”–\•–„•\–„    ‘›}’ “”•\–œ˜†\††  ™š %'%@ “”–\•–„•\–„
‹€¡'{ =_~{_£ Š¥{Œ• '{‘ ‘ 
$?} ‘„}’ “”•\–—˜“\›–   ™š;  “”–\•––“\–– >  ‘•„—ƒ’ “”•\–œ˜˜\†“ {„––™š—Z <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–—“›\›– {„––™š–%%˜ <† “”–\†––„\–— $?} ‘„}’ “”•\–œ˜“\†“  ™š  “”–\•––“\––
   ‘›}’ “”•\–—“•\›–  ™š›› Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–œ“–\†“ {„––™š„˜œ˜ <„† “”–\•–„”\––
{ „ ‘›}’ “”•\–—“–\›– {„––™š–†• <„† “”–\•–„•\–„ { — ‘˜}’ “”•\–œ“„\†“ {„––™šZ–• <—„ “”–\•–„”\––
{ — ‘›}’ “”•\–—“„\›– {„––™š%%%Z <—„ “”–\•–„•\–„ { œ ‘˜}’ “”•\–œ“—\†“ {„––™š˜“ <œ” “”–\•–„”\––
{ œ ‘›}’ “”•\–—“—\›– {„––™š——†Z <œ” “”–\•–„•\–„ { › ‘˜}’ “”•\–œ“œ\†“ {„––™š„—–– <œ† “”–\•–„”\––
{ › ‘›}’ “”•\–—“œ\›– {„––™š@”“ <œ† “”–\•–„•\–„    ‘›}’ “”•\–œ“›\†“  ™š› %'%@ “”–\•–„•\–„
{_'{‘  =$_€¥{Š• '{ ‘
$?} ‘„}’ “”•\–œ–„\†„   ™š   “”–\•––“\–– >  ‘•„—ƒ’ “”•\–›–„\˜– {„–„™šœ”@% <† “”–\†––„\–—
>  ‘•„—ƒ’ “”•\–œ–”\†„ {„––™š„—˜” <† “”–\†––„\–— $?} ‘„}’ “”•\–›–—\˜– ™š  “”–\•––“\––
   ‘›}’ “”•\–œ–†\†„  ™š Š‡Œ “”–\•–„•\–„ { „ ‘˜}’ “”•\–›–œ\˜– {„––™š„†“— <„† “”–\•–„”\––
{ „ ‘˜}’ “”•\–œ–—\†„ {„––™š†@Z˜ <„† “”–\•–„”\–– { — ‘˜}’ “”•\–›–›\˜– {„––™š”†Z„ <—„ “”–\•–„”\––
{ — ‘˜}’ “”•\–œ–œ\†„ {„––™š“%%% <—„ “”–\•–„”\–– { œ ‘˜}’ “”•\–›–•\˜– {„––™š˜“@” <œ” “”–\•–„”\––
{ œ ‘˜}’ “”•\–œ–›\†„ {„––™š“ <œ” “”–\•–„”\–– { › ‘˜}’ “”•\–›–”\˜– {„––™šX›“ <œ† “”–\•–„”\––
{ › ‘˜}’ “”•\–œ–•\†„ {„––™š””•“ <œ† “”–\•–„”\––    ‘›}’ “”•\–›–†\˜– ™š› %'%@ “”–\•–„•\–„
 *!”$ *J =; ;_

$SSHQGL[$ 3LQEDOO*DPH
 )LUPZDUH7DEOH
 $33(1',;$
3LQEDOO*DPH)LUPZDUH :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH
6HH ZHEVLWH IRU WKH ODWHVW ,QWHUQDWLRQDO &RGH RU 8SGDWHG 86$ YHUVLRQ  FKHFNVXPV
&KLS 3URJUDP 86$ '07 %G 5DZ
520 6L]H 3DUW 1ž &KHFN 6XP /RF 3DUW 1ž
Ripley’s Believe It or Not!® (Notes 7, 8) Spider-Man• Pinball (S-M) (Notes 7, 9)
Sound (512K) 965-0408-81 V1.00 | $D93D U7 960-7001-02 Boot B-02 (8M) 965-BOOT-SAM X2.10 | $F625 U9 960-5016-00
Game ROM (1M) 965-0409-81 A3.20 | $43FF U210 960-5009-00 unprogrammed
Voice 1 (8M) 965-0410-81 V1.00 | $067B U17 960-5016-00 Memory Stick 128MB (970-0128-00) Version System Bin Files:
Voice 2 (8M) 965-0411-81 V1.00 | $C8B8 U21 960-5016-00 English + Spanish 1.3ES 1.27+ spd_1_30_es.bin
Voice 3 (8M) 965-0412-81 V1.00 | $64C2 U36 960-5016-00 English + French 1.3EF 1.27+ spd_1_30_ef.bin
Voice 4 (8M) 965-0413-81 V1.00 | $5341 U37 960-5016-00 German+French 1.3GF 1.27+ spd_1_30_gf.bin
Display (4M) 965-0414-81 A3.00 | $DE4B U5 DC PCB 960-5015-01 English + Italian 1.3EI 1.27+ spd_1_30_ei.bin
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 25MB – 30MB+/–
Elvis® (Notes 7, 8)
Sound (512K) 965-0415-84 V1.00 | $8CD2 U7 960-7001-02
Game ROM (1M) 965-0416-84 A5.00 | $50FF U210 960-5009-00
Voice 1 (8M) 965-0417-84 V1.00 | $538D U17 960-5016-00
Voice 2 (8M) 965-0418-84 V1.00 | $8BCD U21 960-5016-00
Voice 3 (8M) 965-0419-84 V1.00 | $60F8 U36 960-5016-00
Voice 4 (8M) 965-0420-84 V1.00 | $14D8 U37 960-5016-00
Display (4M) 965-0421-84 A5.00 | $A1F6 U5 DC PCB 960-5015-01

The SopranosSM (Notes 7, 8).

Sound (512K) 965-0422-85 V4.00 | $9B5A U7 960-7001-02
Game ROM (1M) 965-0423-85 A5.00 | $5BFF U210 960-5009-00
Voice 1 (8M) 965-0424-85 V3.00 | $F01E U17 960-5016-00
Voice 2 (8M) 965-0425-85 V1.04 | $C14C U21 960-5016-00
Voice 3 (8M) 965-0426-85 V1.04 | $47A3 U36 960-5016-00
Voice 4 (8M) 965-0427-85 V1.04 | $ADCD U37 960-5016-00
Display (4M) 965-0428-85 A5.00 | $B4BB U5 DC PCB 960-5015-01

NASCAR® (Notes 7, 8)
Sound (512K) 965-0429-86 V2.00 | $32B3 U7 960-7001-02
Game ROM (1M) 965-0430-86 A4.50 | $39FF U210 960-5009-00
Voice 1 (8M) 965-0431-86 V2.00 | $CFFB U17 960-5016-00
Voice 2 (8M) 965-0432-86 V2.00 | $22C0 U21 960-5016-00
Voice 3 (8M) 965-0433-86 V2.00 | $5FC8 U36 960-5016-00
Voice 4 (8M) 965-0434-86 V2.00 | $2902 U37 960-5016-00
Display (4M) 965-0435-86 A4.00 | $92BD U5 DC PCB 960-5015-01

Grand Prix (Notes 7, 8)

Sound (512K) 965-0429-91 V1.00 | $6F89 U7 960-7001-02
Game ROM (1M) 965-0430-91 A4.50 | $5EFF U210 960-5009-00
Voice 1 (8M) 965-0431-91 V1.00 | $CE0E U17 960-5016-00
Voice 2 (8M) 965-0432-91 V1.00 | $F4C6 U21 960-5016-00
Voice 3 (8M) 965-0433-91 V1.00 | $057D U36 960-5016-00
Voice 4 (8M) 965-0434-91 V1.00 | $2646 U37 960-5016-00
Display (4M) 965-0435-91 A4.00 | $DA8E U5 DC PCB 960-5015-01

[NDSE] (Notes 7, 8) Call for more info if code update required.

Sound (512K) 965-0436-97 U7 960-7001-02
Game ROM (1M) 965-0437-97 U210 960-5009-00
Voice 1 (8M) 965-0438-97 U17 960-5016-00
Voice 2 (8M) 965-0439-97 U21 960-5016-00
Voice 3 (8M) 965-0440-97 U36 960-5016-00
Voice 4 (8M) 965-0441-97 U37 960-5016-00
Display (4M) 965-0442-97 U5 DC PCB 960-5015-01

** GAMES BELOW THIS LINE / NEXT COLUMN ARE S.A.M. SYSTEM GAMES

7225'(50(025<67,&.:,7+*$0(),/(6
)520<285',675,%872586(63,3$57
180%(5 ,1&/8'(7+(
*$0(1$0(/$1*8$*(),/( 6 '(6,5('

World Poker Tour• Pinball (WPT) (Notes 7, 9)

Boot B-02 (8M) 965-BOOT-SAM X1.04 | $7E62 U9 960-5016-00
unprogrammed
Memory Stick 128MB (970-0128-00) Version System Bin Files:
English + Spanish 1.12AL 1.17+ WPT0112AL.bin
English Only 1.12A 1.17+ WPT0112A.bin
English + French 1.12AF 1.17+ WPT0112AF.bin
French Only 1.12F 1.17+ WPT0112F.bin
German + French 1.12GF 1.17+ WPT0112GF.bin
German Only 1.12G 1.17+ WPT0112G.bin
English + Italian 1.12AI 1.17+ WPT0112AI.bin
Italian Only 1.12I 1.17+ WPT0112I.bin
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 25MB – 30MB+/–

The Simpsons• Kooky Carnival Redemption (Note 9)

Boot B-02 (8M) 965-BOOT-SAM X1.04 | $7E62 U9 960-5016-00
unprogrammed
Memory Stick 128MB (970-0128-00) Version Bin Files:
English Only 1.05 SKC0105.bin
English New Jersey Only 0.09NJ SKC0090NJ.bin
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 5.5MB +/–

©Disney’s Pirates of the Caribbean Pinball (POTC) (Notes 7, 9)

Boot B-02 (8M) 965-BOOT-SAM X1.06 | $2014 U9 960-5016-00
unprogrammed
Memory Stick 128MB (970-0128-00) Version System Bin Files:
English + Spanish 1.15AS 1.17+ POTC115AS.bin
English + French 1.15AF 1.17+ POTC115AF.bin
German + French 1.15GF 1.17+ POTC115GF.bin
English + Italian 1.15AI 1.17+ POTC115AI.bin
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 25MB – 30MB+/–

Family Guy• Pinball (FG) (Notes 7, 9)

Boot B-02 (8M) 965-BOOT-SAM X2.09 | $10A3 U9 960-5016-00
unprogrammed
Memory Stick 128MB (970-0128-00) Version System Bin Files:
English + Spanish 10.00AL 1.23+ FG1000AL.bin
English + French 10.00AF 1.23+ FG1000AF.bin footnotes:
English + German 10.00AG 1.23+ FG1000GF.bin
English + Italian 10.00AI 1.23+ FG1000AI.bin 1 ROMs on CPU/Sound Bd.: 520-5136-00 (Stereo) & Display Cont. Bd.: 520-5055-01
2 ROMs on CPU/Sound Bd.: 520-5136-10 (Mono) & Display Cont. Bd.: 520-5055-01
NOTE: THE TYPICAL SIZE PER UNZIPPED BIN FILE IS 25MB – 30MB+/– 3 ROMs on CPU/Sound Board: 520-5136-15* (Mono) (*FCC 11-97) &
Display Controller Board: 520-5055-02* (*FCC 11-97)

3LQEDOO*DPH $SSHQGL[$
)LUPZDUH7DEOH 
 $33(1',;$
3LQEDOO*DPH)LUPZDUH7DEOH
&KLS 3URJUDP 86$ %G 5DZ &KLS 3URJUDP 86$ %G 5DZ
(3520 6L]H 3DUW 1ž 9HU /RF 3DUW 1ž (3520 6L]H 3DUW 1ž 9HU /RF 3DUW 1ž
Laser War Lethal Weapon 3
CPU (256K) 965-0004-00 LWAR.C5 C5 960-5007-00 CPU (512K) 965-0082-00 A2.08 C5 960-7001-02
Sound (Old) (256K) 965-0005-00 J5 960-5007-00 Voice 1 (2M) 965-0083-00 U17 960-5010-00
Sound (Old) (256K) 965-0006-00 J6 960-5007-00 Voice 2 (2M) 965-0084-00 U21 960-5010-00
Sound (Old) (256K) 965-0007-00 J7 960-5007-00 Sound (256K) 965-0085-00 U7 960-5007-00
Display (2M) 965-0086-00 A2.06 ROM 0 960-5010-00
- OR - Display (2M) 965-0087-00 A2.06 ROM 1 960-5010-00
Sound (256K) 965-0008-00 7F 960-5007-00 (Used on Display PCB 520-5055-00)
Sound 1 (512K) 965-0009-00 6F 960-7001-02
Sound 2 (512K) 965-0010-00 4F 960-7001-02 -OR-
Display (4M) 965-0087-04 A2.06 ROM 0 960-5015-00
Secret Service (Used on Display PCB 520-5055-01)
CPU (256K) 965-0011-00 A4-6 B5 960-5007-00
CPU (256K) 965-0012-00 A4-6 C5 960-5007-00 Star Wars
Voice 1 (512K) 965-0014-00 6F 960-7001-02 CPU (512K) 965-0119-00 A1.03 C5 960-7001-02
Voice 2 (512K) 965-0015-00 4F 960-7001-02 Voice 0 (4M) 965-0132-00 U17 960-5015-00
Sound (256K) 965-0013-00 7F 960-5007-00 Voice 1 (2M) 965-0133-00 U21 960-5010-00
Sound (256K) 965-0131-00 U7 960-5007-00
Torpedo Alley Display (2M) 965-0120-00 A1.04 ROM 0 960-5010-00
Display (2M) 965-0121-00 A1.04 ROM 1 960-5010-00
CPU (256K) 965-0016-00 A2-1 B5 960-5007-00 (Used on Display PCB 520-5055-00)
CPU (256K) 965-0017-00 A2-1 C5 960-5007-00
Voice 1 (512K) 965-0019-00 6F 960-7001-02 -OR-
Voice 2 (512K) 965-0020-00 4F 960-7001-02 Display (4M) 965-0122-00 A1.05 ROM 0 960-5015-00
Sound (256K) 965-0018-00 7F 960-5007-00 (Used on Display PCB 520-5055-01)

Time Machine Rocky & Bullwinkle & Friends

CPU (128K) 965-0021-00 A2-4 B5 960-5006-00 CPU (512K) 965-0138-00 A1.30 C5 960-7001-02
CPU (256K) 965-0022-00 A2-4 C5 960-5007-00 Voice 0 (4M) 965-0139-00 U17 960-5015-00
Voice 1 (512K) 965-0024-00 6F 960-7001-02 Voice 1 (2M) 965-0140-00 U21 960-5010-00
Voice 2 (512K) 965-0025-00 4F 960-7001-02 Sound (256K) 965-0141-00 U7 960-5007-00
Sound (256K) 965-0023-00 7F 960-5007-00 Display (4M) 965-0142-00 A1.30 ROM 0 960-5015-00

Playboy 35th Anniversary Jurassic Park

CPU (256K) 965-0046-00 A2-4 B5 960-5007-00 CPU (512K) 965-0143-00 A5.13 C5 960-7001-02
CPU (256K) 965-0047-00 A2-4 C5 960-5007-00 Voice 0 (4M) 965-0144-00 U17 960-5015-00
Voice 1 (512K) 965-0049-00 6F 960-7001-02 Voice 1 (2M) 965-0145-00 U21 960-5010-00
Voice 2 (512K) 965-0050-00 4F 960-7001-02 Sound (256K) 965-0146-00 U7 960-5007-00
Sound (256K) 965-0048-00 7F 960-5007-00 Display (4M) 965-0147-00 A5.10 ROM 0 960-5015-00

ABC Monday Night Football Last Action Hero

CPU (128K) 965-0031-00 A2-7 B5 960-5006-00 CPU (512K) 965-0148-00 A1.12 C5 960-7001-02
CPU (256K) 965-0032-00 A2-7 C5 960-5007-00 Voice 0 (4M) 965-0149-00 U17 960-5015-00
Voice 1 (512K) 965-0034-00 6F 960-7001-02 Voice 1 (2M) 965-0150-00 U21 960-5010-00
Voice 2 (512K) 965-0035-00 4F 960-7001-02 Sound (256K) 965-0151-00 U7 960-5007-00
Sound (256K) 965-0033-00 7F 960-5007-00 Display (4M) 965-0152-00 A1.06 ROM 0 960-5015-00

Robocop Tales from the Crypt

CPU (256K) 965-0036-00 A3-4 B5 960-5007-00 CPU (512K) 965-0157-00 A3.03 C5 960-7001-02
CPU (256K) 965-0037-00 A3-4 C5 960-5007-00 Voice 0 (4M) 965-0158-00 U17 960-5015-00
Voice 1 (512K) 965-0039-00 6F 960-7001-02 Voice 1 (2M) 965-0159-00 U21 960-5010-00
Voice 2 (512K) 965-0040-00 4F 960-7001-02 Sound (256K) 965-0160-00 U7 960-5007-00
Sound (256K) 965-0038-00 7F 960-5007-00 Display (4M) 965-0161-00 A3.01 ROM 0 960-5015-00

Phantom of the Opera The Who’s Tommy

CPU (128K) 965-0026-00 A3-2 B5 960-5006-00 CPU (512K) 965-0162-00 A4.00 C5 960-7001-02
CPU (256K) 965-0027-00 A3-2 C5 960-5007-00 Voice 1 (4M) 965-0165-00 U17 960-5015-00
Voice 1 (512K) 965-0029-00 6F 960-7001-02 Voice 2 (4M) 965-0166-00 U21 960-5015-00
Voice 2 (512K) 965-0030-00 4F 960-7001-02 Voice 3 (4M) 965-0167-00 U36 960-5015-00
Sound (256K) 965-0028-00 7F 960-5007-00 Voice 4 (4M) 965-0168-00 U37 960-5015-00
Sound (512K) 965-0164-00 U7 960-7001-02
Back to the Future Display (4M) 965-0163-00 A4.00 ROM 0 960-5015-00
CPU (256K) 965-0041-00 A2-0 B5 960-5007-00
CPU (256K) 965-0042-00 A2-0 C5 960-5007-00 WWF Royal Rumble
Voice 1 (512K) 965-0044-00 6F 960-7001-02 CPU (512K) 965-0169-00 A1.06 C5 960-7001-02
Voice 2 (512K) 965-0045-00 4F 960-7001-02 Voice 1 (4M) 965-0172-00 U17 960-5015-00
Sound (256K) 965-0043-00 7F 960-5007-00 Voice 2 (4M) 965-0173-00 U21 960-5015-00
Voice 3 (4M) 965-0174-00 U36 960-5015-00
The Simpsons Sound (512K) 965-0171-00 U7 960-7001-02
Display (4M) 965-0170-00 A1.02 ROM 0 960-5015-00
CPU (128K) 965-0051-00 A2-7 B5 960-5006-00
CPU (256K) 965-0052-00 A2-7 C5 960-5007-00
Voice 1 (512K) 965-0054-00 6F 960-7001-02 Guns N’ Roses
Voice 2 (512K) 965-0055-00 4F 960-7001-02 CPU (512K) 965-0175-00 A3.00 C5 960-7001-02
Sound (256K) 965-0053-00 7F 960-5007-00 Voice 1 (4M) 965-0178-00 U17 960-5015-00
Voice 2 (4M) 965-0179-00 U21 960-5015-00
Checkpoint Voice 3 (4M) 965-0180-00 U36 960-5015-00
Voice 4 (4M) 965-0181-00 U37 960-5015-00
CPU (128K) 965-0056-00 A1-7 B5 960-5006-00 Sound (512K) 965-0177-00 U7 960-7001-02
CPU (256K) 965-0134-00 A1-7 C5 960-5007-00 Display (4M) 965-0176-00 A3.00 ROM 0 960-5015-00
Voice 1 (1M) 965-0057-00 F7 960-5009-00
Voice 2 (1M) 965-0058-00 F5 960-5009-00
Sound (256K) 965-0059-00 F4 960-5007-00 Maverick *
Display (512K) 965-0060-00 CP80 U8 960-7001-02 CPU (512K) 965-0182-00 A4.04 C5 960-7001-02
Voice 1 (4M) 965-0186-00 U17 960-5015-00
Teenage Mutant Ninja Turtles Voice 2 (4M) 965-0187-00 U21 960-5015-00
Voice 3 (4M) 965-0187-01 U36 960-5015-00
CPU (128K) 965-0061-00 A1.04 B5 960-5006-00 Sound (512K) 965-0185-00 U7 960-7001-02
CPU (256K) 965-0062-00 A1.04 C5 960-5007-00 Display* (4M) 965-0183-00 A4.01 ROM 0 960-5015-00
Voice 1 (1M) 965-0063-00 F5/6 960-5009-00 Display* (4M) 965-0184-00 A4.01 ROM 3 960-5015-00
Voice 2 (1M) 965-0064-00 F4/5 960-5009-00
Sound (256K) 965-0065-00 F7 960-5007-00
Display (512K) 965-0066-00 A1.04 U8 960-7001-02 Mary Shelley’s Frankenstein *
CPU (512K) 965-0188-00 A1.03 C5 960-7001-02
Batman Voice 1 (4M) 965-0192-00 U17 960-5015-00
Voice 2 (4M) 965-0193-00 U21 960-5015-00
CPU (128K) 965-0067-00 A1.06 B5 960-5006-00 Voice 3 (4M) 965-0194-00 U36 960-5015-00
CPU (256K) 965-0135-00 A1.06 C5 960-5007-00 Sound (512K) 965-0191-00 U7 960-7001-02
Voice 1 (2M) 965-0068-00 U17 960-5010-00 Display* (4M) 965-0189-00 A1.03 ROM 0 960-5015-00
Voice 2 (1M) 965-0069-00 U21 960-5009-00 Display* (4M) 965-0190-00 A1.03 ROM 3 960-5015-00
Sound (256K) 965-0070-00 U7 960-5007-00
Display (1M) 965-0071-00 A1.06 U8 960-5009-00
Baywatch * (CPU Board 520-5003-04)
Star Trek 25th Anniversary CPU (512K) 965-0195-00 A4.00 C5 960-7001-02
Voice 1 (4M) 965-0196-00 U17 960-5015-00
CPU (512K) 965-0072-00 A2.01 C5 960-7001-02 Voice 2 (4M) 965-0197-00 U21 960-5015-00
Voice 1 (2M) 965-0073-00 U17 960-5010-00 Sound (512K) 965-0199-00 U7 960-7001-02
Voice 2 (2M) 965-0074-00 U21 960-5010-00 Display* (4M) 965-0200-00 A4.00 ROM 0 960-5015-00
Sound (256K) 965-0075-00 U7 960-5007-00 Display* (4M) 965-0201-00 A4.00 ROM 3 960-5015-00
Display (1M) 965-0076-00 A1.09 U8 960-5009-00

Hook Batman Forever * (CPU Board 520-5003-04)

CPU (512K) 965-0202-00 A3.02 C5 960-7001-02
CPU (512K) 965-0077-00 A4.08 C5 960-7001-02 Voice 1 (4M) 965-0203-00 U17 960-5015-00
Voice 1 (2M) 965-0078-00 U17 960-5010-00 Voice 2 (4M) 965-0204-00 U21 960-5015-00
Voice 2 (2M) 965-0079-00 U21 960-5010-00 Sound (512K) 965-0205-00 U7 960-7001-02
Sound (256K) 965-0080-00 U7 960-5007-00 Display* (4M) 965-0206-00 A3.00 ROM 0 960-5015-00
Display (1M) 965-0081-00 A4.01 U8 960-5009-00 Display* (4M) 965-0207-00 A3.00 ROM 3 960-5015-00

* Note: Display EPROMS (4M) for Maverick thru Batman Forever require an access time of 120 Nsec or faster.

$SSHQGL[$ 3LQEDOO*DPH
 )LUPZDUH7DEOH
 $33(1',;%
6HPL&RQGXFWRUV,QWHJUDWHG&LUFXLWV ,& 5HOD\V&URVV5HIHUHQFH7DEOH

67(51Š
1 7 (Š ( & *Š 5 & $Š
7DEOH 6RXUFH 5DGLR
6KDFNŠ
7\SH
1ž 1XPEHU 3,1%$//
5(&7,),&$7,21 %/2&.,1* '$03(1,1* ',2'(6 $1'25 /,*+7 (0,77,1* ',2'(6 /('V
  „€›––„ „„—\•––„\–– €X••— X%••— \Ÿ\Ÿ\ >ƒ“–––
  „€›––› „„—\•––œ\–– €X„„” X%„„” —†”\„„–œ >ƒœœ„—
  „€•›–„ „„—\––•”\–– €X•˜–„ X%•˜–„ —†”\„„›œ >ƒ“––›
  „€•›–› „„—\•––›\–– €X•˜–› X%•˜–› —†”\„„›› >ƒ“––†
  
 
”„–^
Z$œ–—
„„—\•––”\–„
„„—\•––“\––
€X•˜„—
€X•˜˜
X%•˜„—
X%•˜˜
\Ÿ\Ÿ\
\Ÿ\Ÿ\
\Ÿ\Ÿ\
>ƒ•–„›
 >   „€“„› „„—\•–„›\–– \Ÿ\Ÿ\ \Ÿ\Ÿ\ \Ÿ\Ÿ\ \Ÿ\Ÿ\
Œ=  Š „”•\•–•—\––
^X =$Š† %ˆ‰ \Ÿ\Ÿ\ \Ÿ\Ÿ\ —†”\–””@ \Ÿ\Ÿ\
‘„\œ=› ’ KŠX‹XKŒŒ‹ŒŒ
=(1(5 ',2'(6
  „€›†›—„— „„—\––”„\–– €X„›— X%„›— —†”\•”œ >ƒ„—{
  „€›†”–@”˜ „„—\––”—\––@ €X•–“— X%•–“— \Ÿ\Ÿ\ >ƒ”˜{
  „€›†”›„–– „„—\––›“\–– €X•–“” X%•–“” \Ÿ\Ÿ\ >ƒ„––{


  „€•——˜œ“ „„—\––•œ\–– €X•––† X%•––† \Ÿ\Ÿ\ >ƒœ“
  „€•—œ›@”— „„—\––›†\––@ €X•–„œ X%•–„œ —†”\•”„ >ƒ”—
  „€•œ†“„„– „„—\––†—\–– €X•„•† X%•„•† \Ÿ\Ÿ\ >ƒ„„–
  „€”—”†”˜ „„—\•–„„\–– €X›“–— X%›“–— \Ÿ\Ÿ\ \Ÿ\Ÿ\
  „€›†•—œœ „„—\•–„–\–– €X„›† X%„›† \Ÿ\Ÿ\ >ƒœœ{
  „€›†œ””˜„ „„—\•––†\–– €X•–†„ X%•–†„ \Ÿ\Ÿ\ \Ÿ\Ÿ\
75$16,67256  7<3( )(7 131 313 $1'25 6&5
ZX  >'—–€„–^ „„–\–„–”\–– €X—“˜† X%—“˜† \Ÿ\Ÿ\ \Ÿ\Ÿ\
ZX  >'„“€–”^ „„–\––˜˜\–– €X—“˜• X%—“˜• \Ÿ\Ÿ\ \Ÿ\Ÿ\
ZX  {€–—€ „„–\––˜“\–– \Ÿ\Ÿ\ \Ÿ\Ÿ\ \Ÿ\Ÿ\ \Ÿ\Ÿ\
€'€  —€››–„ „„–\––†œ\–– €X˜• X%˜• —†”\—––“ >ƒœ„—›
€'€  —€”›—† „„–\––†–\–– €X›˜ X%›˜ \Ÿ\Ÿ\ >ƒ›“–”
€'€  } Xœ›– „„–\––†„\–– €X„•† X%„•† \Ÿ\Ÿ\ >ƒœ†›†
€'€  }'>›— „„–\––˜—\–– €X—˜† X%—˜† \Ÿ\Ÿ\ >ƒœ—œ—
€'€  —€œ“–› „„–\––”“\–– €X„—œ' X%„—œ' —†”\—––“ \Ÿ\Ÿ\
 €'€ 
€'€ 
'„——
} X„•–œ–
„„–\––”†\––
„„–\–„–„\––
€X—”„
€Xœ†•
X%—”„
X%œ†•
—†”\—–”˜
\Ÿ\Ÿ\
>ƒœ˜“”
>ƒ“„„˜
'€'  —€•›–„ „„–\––†˜\–– €X—˜˜ X%—˜˜ \Ÿ\Ÿ\ >ƒœ›œ›
'€'  } X„•–œ„ „„–\–„–œ\–– €X—“— X%—“— \Ÿ\Ÿ\ >ƒœ››„
'€'  } Xœ•– „„–\––†—\–– €Xœ†› X%œ†› \Ÿ\Ÿ\ >ƒ“–›—
'€'  }'>“— „„–\–„––\–– €X—˜˜ X%—†˜ \Ÿ\Ÿ\ >ƒœ›œ›
'€'  '›— „„–\––”˜\–– €Xœœ— X%œœ— \Ÿ\Ÿ\ >ƒ“—œ”
'€'  'œ—% „„–\––˜„\–– €X—“— X%—“— \Ÿ\Ÿ\ >ƒœ››„
'€'  'œ”% „„–\––††\–– €Xœ“œ X%œ“œ \Ÿ\Ÿ\ >ƒœ“”„
>%$  —€•–”– „„–\––†›\–– €X•›–– X%•›–– —†”\„–”† >ƒœ“•–
>%$  >%$—˜––@ „„–\––˜œ\–– €X•›”„\˜ X%•›”„\˜ \Ÿ\Ÿ\ \Ÿ\Ÿ\
%5,'*( 5(&7,),(56 %5 &RPPHQWV

 @$‘'  ’
5(/$<6
@œ•–„
%}œ•–„
„„—\•–––\–– Z¡>=?@ @$¢œ•£„––'{

&RPPHQWV
$  Z$^\—”› „“–\•––—\–– Z''@'> ¤¡ >=?@ 


–—›=–—%ƒ $ ¢—›%„–'
Z$^\—”› Z%'<@ 
$  „“–\•––„\––
––”=–›%{ $ ¢”%•›' 

$SSHQGL[% 6HPL&RQGXFWRUV
 &URVV5HI7DEOH
 $33(1',;&
3URGXFWLRQ6WDUW'DWH0DQXDO3DUW1ž5206L]H 3RVLWLRQVDQG
-XPSHU:,QVWDOOHG1RWH‡ :KLWH6WDU%RDUG6\VWHP 6$06\VWHP2QO\* 

*DPH 1DPH
CPU/Sound Board Sound U7 512K
3URGXFWLRQ CPU/Sound *DPH 1DPH 3URGXFWLRQ CPU/Sound Board Sound U7 512K

‡ VHH 1RWH
6WDUW 'DWH CPU/Sound Board Game U210 1MB

,QVWDOOHG
:KLWH 6WDU 6WDUW 'DWH Board Game U210 1MB
:KLWH 6WDU

-XPSHU
DQG 0DQXDO CPU/Sound Board Voice ROMS: DQG 0DQXDO CPU/Sound Board Voice ROMS:
%G 6\VWHP• 3DUW 1U U17 U21 U36 U37
%RDUG 6\VWHP• 3DUW 1U U17 U21 U36 U37
* Note: For complete Appendix Information for Games Laser War 54 Elvis® AUG 04
780-5084-00 8MB 8MB 8MB 8MB
through Batman Forever, see any Service Game Manual SM
between Apollo 13 through Ripley’s Believe It or Not! 55 The Sopranos FEB 05
780-5085-00 8MB 8MB 8MB 8MB
or on-line at our website www.sternpinball.com/parts.htm;
also available on CD-R, 970-2003-00 (The Simpsons•
Pinball Party, T3® and The Lord of the Rings• ). 56 NASCAR® JUL 05 8MB 8MB 8MB 8MB
780-5086-00

29 Apollo 13 NOV 95 4MB 4MB 4MB Not n/a 57 Grand Prix SEP 05 8MB 8MB 8MB 8MB
(A13) 780-5044-00 Used 780-5091-00

30 Golden
Eye
FEB 96
780-5042-00 4MB 4MB Not
Used
Not
Used n/a See Apdx. A for more detailed information on Pinball Game Firmware (ROM
Name, Size, Part Numbers, USA Version & Checksum and Board Locations).
31 Twister APR 96 4MB 4MB Not Not n/a 3URGXFWLRQ S.A.M. System CPU/Sound Board
780-5041-00 Used Used
*DPH 1DPH 6WDUW 'DWH Boot EPROM U9
32 ID4: Independ-
ence Day
JUL 96
780-5045-00
4MB 4MB Not
Used
Not
Used
n/a 6$0 6\VWHP DQG 0DQXDO
3DUW 1U 965-BOOT-SAM (Programmed)
33 Space
Jam
OCT 96
780-5043-00 4MB 4MB 4MB Not
Used n/a 58 World Poker Tour• JUN 06 8MB B-02 chksum LOC:
(WPT) 780-5088-00 V2.1+ $F625 U9
34 Trilogy - Sp. Ed. FEB
The Star Wars 97
780-5056-00 4MB 4MB Not
Used
Not
Used n/a 59 The Simpsons• APR 06 8MB B-02 chksum LOC:
Kooky Carnival 780-5090-00 V2.1+ $F625 U9
35 The Lost World: JUN 97 4MB 4MB Not Not n/a 60 ©Disney’s AUG 06 8MB B-02 chksum LOC:
Jurassic Park 780-5053-00 Used Used Pirates of the Caribbean 780-5092-00 V2.1+ $F625 U9
The AUG 97 Not Not
36
X-Files 780-5046-00
4MB 4MB
Used Used
n/a 61 Famil Guy• DEC 06
780-5093-00 8MB B-02 chksum LOC:
V2.1+ $F625 U9
37 Starship
Troopers
NOV 97
780-5059-00 4MB 4MB 4MB Not
Used n/a 62 Spider-Man• MAY 07 8MB B-02 chksum LOC:
780-5094-00 V2.1+ $F625 U9
38 Viper
Drivin’
Night FEB 98
780-5035-00 4MB 4MB 4MB 4MB n/a Games 58 – current, S.A.M. System : CPU/Sound & I/O Power Driver PCBs
Lost In JUN 98 differ than White Star (previous Games 29 – 57); Disp. Controller Not Required.
39 4MB 4MB 4MB 4MB n/a
Space 780-5060-00
40 Godzilla SEP 98 4MB 4MB 4MB 4MB n/a
780-5040-00
South
41 Park JAN 99 8MB 8MB 8MB 8MB W6
780-5071-00
42 Harley- AUG 99 8MB 8MB 8MB 8MB W6
a Davidson® 780-5067-01
42 Harley-David- SEP 02 8MB 8MB 8MB 8MB W6
b son®2nd Ed. 780-5067-10
42 Harley-David- OCT 04 8MB 8MB 8MB 8MB W6
c son® 3rd Ed. 780-5087-00
43 Striker MAR 00 8MB 8MB 8MB 8MB W6
a Xtreme 780-5068-01
43 NFL OCT 00 8MB 8MB 8MB 8MB W6
b 780-5073-00
44 Sharkey’s JUL/OCT 00 8MB 8MB 8MB Not W6
Shootout 780-5072-01 Used
45 High Roller JAN 01 8MB 8MB 8MB 8MB W6
Casino 780-5065-00
46 Austin MAY 01 8MB 8MB 8MB 8MB W6
Powers• 780-5074-00
47 MONOPOLY® 780-5075-00
SEP 01 8MB 8MB 8MB Not
Used W6

48 Playboy FEB 02 8MB 8MB 8MB 8MB W6

780-5076-00
49 RollerCoaster AUG 02 8MB 8MB 8MB Not W6
Tycoon• 780-5078-00 Used
The Simpsons
50 Pinball Party • JAN 03
8MB 8MB 8MB 8MB W6
780-5077-00
51 T3®: Rise of MAY 03
the Machines• 780-5079-00 8MB 8MB 8MB 8MB W6

52 The Lord of
the Rings•
NOV 03
780-5080-00 8MB 8MB 8MB 8MB

53 Ripley’s Believe APR 04 8MB 8MB 8MB 8MB

It or Not!® 780-5081-00
‡ Additional Information for Installed Jumper (above games 41-51):
x Installed W6 so 8MB ROMS can be utilized. See the CPU/Sound Board
Schematic (Sheet 2 of 3, Address Location 3E) in the games’ Service Game
Manual. Games 52 - 57 CPU/Sound Board differ than <51 (See Appendix D).
See Apdx. A for more detailed information on Pinball Game Firmware (ROM
Name, Size, Part Numbers, USA Version & Checksum and Board Locations).

3URGXFWLRQ6WDUW $SSHQGL[&
,QVWDOOHG1RWH 
 $33(1',;'
%RDUG7\SH :KLWH6WDU%RDUG6\VWHP 2QO\ 7DEOH

*DPH )OLSSHU ,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[ 'LVSOD\ 2372 2372 2372
1DPH 'ULYHU 6WHUHR 6XSSO\ 'LVSOD\ &RQWUROOHU 7UDQVPLWWHU 5HFHLYHU $SSOLFDWLRQ

•—–\•–˜–\–– •—–\•„œ†\––
•—–\•„œ”\–– •—–\•–•—\––
•—–\•„œ˜\–– „—˜ •—–\•„—›\––
•—–\•–••\–„ > •—–\•„—•\–– •\@ 
—\Z  œ—  ?'? >  ?'? <\ƒ _
 „œ ^ @ •—–\•„œ–\–„\–›¤\–•}   
}    $ @
'%@ ‡ †\>   ¤^ @•—–\•„œ–\–”}  
•—–\•–„–\––
@•—–\•„œ–\–—>  } @•—–\•„œ–\–œ
•—–\•–˜–\–– •—–\•„œ†\–– •—–\•„œ”\–– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– •\@ 
—\Z  „—˜ œ— >  ?'? >  ?'? <\ƒ _
  X
}    ^ @ }'   — @ $ @
'%@ ‡ •—–\•„—˜\–•\–˜ •—–\•„›œ\–– •—–\•–„–\––
}X>‚X$X?€€?^?€X$$X¦<$X‚XZ^''X$@?$¡‚‚X¡‚X>$@?$>§>X}•
*DPH ,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[ 'LVSOD\ 2372 2372 2372 0LVF 2372
1DPH 'ULYHU 0RQR 6XSSO\ 'LVSOD\ &RQWUROOHU 7UDQVPLWWHU 5HFHLYHU $SSOLFDWLRQ $SS
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– •\@ 
„—˜ œ— >  ?'? >  ?'? <\ƒ _
 
}    ^ @ }@ $ @
'%@ ‡ •—–\•„›•\–„\–† •—–\•„›œ\–– •—–\•–„–\––
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– ›\@ 
    „—˜ œ— >  ?'? >  ?'? <\ƒ _
‘›’ }    ^ @ >}@ •—–\•–˜—\–– •—–\•–˜œ\––   ‚
'%@ ‡ •—–\•„›“\–„\„– •—–\•„•—\–– ^ ‚‡=‡ ^ ‚‡=‡ X 
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– •\@ 
„—˜ œ— >  ?'? >  ?'? <\ƒ _
>  
}    — †\>   @
'%@ ‡ •—–\•„•œ\––
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– ›\@ 
> „—˜ œ— >  ?'? >  ?'? <\ƒ _
¡   
\>  X }    $ @
'%@ ‡ •—–\•–„–\––
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– ›\@  •—–\•„”—\––
^  „—˜ œ— >  ?'? >  ?'? <\ƒ _ —\' }
¡ ‡ ' }    ' %$ @ >_}@ > 
%@ ‡ •—–\•–””\–– •—–\•–”•\–– > }
•—–\•„œ†\–„ •—–\•„œ”\„– •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–„ •—–\•„—›\–– •—–\•„—•\–– ›\@  •—–\•„••\––
„—˜ œ— >  ?'? >  ?'? <\ƒ _ œ\' }
 \Z  > 
}    •—–\•–˜—\–– •—–\•–˜œ\–– Z %  Z %
'%@ ‡ ^ ‚‡=‡ ^ ‚‡=‡ X  }
•—–\•„œ†\–„ •—–\•„œ”\„• •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–— •—–\•„—›\–– •—–\•„—•\–– ›\@ 
>   „—˜ œ— >  ?'? >  ?'? <\ƒ _
 }    › †\>   @ •—–\•–˜—\–– •—–\•–˜œ\–„ ^=$? 
'%@ ‡ •—–\•„””\–– ^ ‚‡=‡ ^ ‚‡=‡ ^ X 
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •—–\•„—›\–– •—–\•„—•\–– ›\@ 
{ €  „—˜ œ— >  ?'? >  ?'? <\ƒ _
  ¨ }    $ @ •—–\•–˜—\–– •—–\•–˜œ\–„
'%@ ‡ ^ ‚‡=‡ ^ ‚‡=‡ $
•—–\•–„–\––
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@ 
„—˜ œ—  ?'?  ?'? <\ƒ _
^  > 
}    $ @
'%@ ‡ •—–\•–„–\––
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@ 
„—˜ œ—  ?'?  ?'? <\ƒ _
 
}    >_}@
'%@ ‡ •—–\•–”•\––
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– •\@ 
„—˜ œ—  ?'?  ?'? <\ƒ _
>'_
}    •—–\•–˜—\–– •—–\•–˜œ\–„ ƒ < 
'%@ ‡ ^ ‚‡=‡ ^ ‚‡=‡ X 
‚ \ •—–\•„œ†\–„ •—–\•„œ”\„” •—–\•–•—\–– •„•\–„†œ\–– •„•\–„†›\–– ›\@ 
   © *•—–\•œ––\––* •—–\•„œ˜\–– „—˜ œ— •—–\•–••\–œ  ?'?  ?'? <\ƒ _
„ \œ* }    $ @ >_}@  @ •—–\•–˜—\–– •—–\•–˜œ\–„ }  
X   '%@ ‡ •—–\•–„–\–– •—–\•–”•\–– •—–\•„›”\–– ^ ‚‡=‡ ^ ‚‡=‡ X 
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•–•—\––
•—–\•„œ˜\–– „—˜ •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@  •—–\•„••\––
> _ œ—  ?'?  ?'? <\ƒ _ œ\' }
  Ž‡'$¤¦ > 
‘€Z^’ }    %$ @ $ @  @ €§ƒ€_;€ •—–\•–˜—\–– •—–\•–˜œ\–„  < \
'%@ ‡ •—–\•–””\–– •—–\•–„–\–– •—–\•„›”\––  ›  ^ ‚‡=‡ ^ ‚‡=‡ X   }
•—–\•„œ†\”› •—–\•„œ”\”› •—–\•–•—\––
•—–\•„œ˜\–– „—˜ •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@  •—–\•„“›\––
>_¨ œ—  ?'?  ?'? <\ƒ _ ›\' }
> }    ' $ @ > X`@ > 
%@ ‡ •—–\•–„–\–– •—–\•„“—\–– ª\@ }
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•–•—\––
•—–\•„œ˜\–– „—˜ •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@  •—–\•„“›\––
œ—  ?'?  ?'? <\ƒ _ ›\' }
‚ $  •—–\•–˜—\–– •—–\•–˜œ\–„ @ ^ _ > 
%  ^ ‚‡=‡ ^ ‚‡=‡  $  $ 
}      ‘• †’ > }   Ž‡'$¤¦
•—–\•„“”\–– •—–\•„“•\–– <= $ ¡
'%@ ‡ •—–\•„“†\––
€§ƒ€_;€
œ\' ?'? œ\' ?'? > }  }
 › 

•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@ 

  „—˜ œ—  ?'?  ?'? <\ƒ _ •—–\•—„—\––
' • }    ' $ @‘ œ’  Ž‡'$¤¦
€§ƒ€_;€ •—–\•–˜—\–– •—–\•–˜œ\–„  }  
 {_{_
‡=‡ƒ Œ
%@ ‡ •—–\•–„–\––  ›  ^ ‚‡=‡ ^ ‚‡=‡ $
•—–\•„œ†\–„ •—–\•„œ”\„” •—–\•„œ˜\–– •—–\•–•—\–– •—–\•–••\–œ •„•\–„†œ\–– •„•\–„†›\–– ›\@ 
„—˜ œ—  ?'?  ?'? <\ƒ _
}?€?'?^§©  Ž‡'$¤¦
}    ' %$ @ } \  ‘œ• †’ €§ƒ€_;€ •—–\•—„˜\–– •—–\•—„–\–– @ _
%@ ‡ •—–\•–””\–– •—–\•„“†\––{_„  ›  ›\' ?'? ›\' ?'? 
?      • 

$SSHQGL[' %RDUG
 7\SH7DEOH
 $33(1',;'
%RDUG7\SH :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH

*DPH ,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[ 'LVSOD\ 2372 2372 2372 0LVF 2372
1DPH 'ULYHU ROG QHZ 6XSSO\ 'LVSOD\ &RQWUROOHU 7UDQVPLWWHU 5HFHLYHU $SSOLFDWLRQ $SS
520-5137-01 520-5136-16 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough
128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
Playboy for UK ONLY> Sol-
Miscellaneous DC Relay Bd. Relay Bd. enoid Expander Bd.
PC Boards: 520-5066-00 520-5010-00 520-5192-00

520-5137-01 520-5136-16 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 520-5222-00
RollerCoaster 128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker 1-Position
Tycoon• for UK ONLY> Sol-
Miscellaneous DC Relay Bd. Mini-Dot Display (3 by 5X7) enoid Expander Bd. 520-5082-00 520-5083-01 Behind 1-Bank Switch Detect
PC Boards: 520-5066-00 520-5221-00 (Ramp Enter Sign) 520-5192-00 Long Hop OPTO Long Hop OPTO Drop Target on Wheel Spin
The 520-5137-01 520-5136-16 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough
Simpsons• X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
Pinball Miscellaneous LED Bd. Color Dot Display (4 by 5X7) for UK ONLY 999
Aux. Driver Bd.
Party PC Boards: 520-5219-00 520-5225-00 (TV Set) 520-5068-01
Terminator® 520-5137-01 520-5136-16 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough
3: X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
Rise of the Miscellaneous for UK ONLY 999 515-7307-00 515-7308-00 TXCannon
Aux. Driver Bd.
Machines• PC Boards: 520-5068-01 Single OPTO Single OPTO Trough
520-5137-01 New 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 500-6746-00
The Lord 520-5300-00 128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker (White Trans.)
of the
Miscellaneous 19-LED PCB OPTO Transmitter / Receiver for UK ONLY 999 515-7307-00 515-7308-00 Orthanc Tower 500-6747-00
Rings• Aux. Driver Bd.
(Black Rec.)
PC Boards: 520-5242-00 Amplifier PCB 520-5239-00 520-5068-01 Single OPTO Single OPTO Trough
520-5137-01 520-5300-00 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 500-6775-00
Ripley’s X 32 Dots Dual OPTO Dual OPTO over Up-Kicker OPTO Trnscvr
Believe It
Miscellaneous 520-5236-00 OPTO Transmitter / Receiver for UK ONLY 999 520-5234-00 520-5234-00 520-5235-03
or Not!® Aux. Driver Bd. Vari-Target
PC Boards: X3 Dot Display Amplifier PCB 520-5239-01 520-5068-01 3-Pos. OPTO 3-Pos. OPTO X3 Aux. Drvr
520-5137-01 520-5300-00 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough
X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
Elvis®
Miscellaneous for UK ONLY 999
Aux. Driver Bd.
PC Boards: 520-5068-01

520-5137-01 520-5300-00 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough

The 128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker
SopranosSM Miscellaneous for UK ONLY 999
Aux. Driver Bd.
PC Boards: 520-5068-01

520-5137-01 520-5300-00 520-5138-00 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 500-6775-00
NASCAR® 128 X 32 Dots Dual OPTO Dual OPTO over Up-Kicker OPTO Trans.
and [NDSE] Miscellaneous 520-5235-03 OPTO Transmitter / Receiver for UK ONLY 999 (Qty. 16)
Aux. Driver Bd.
PC Boards: X3 Aux. Drvr Amplifier PCB 520-5239-01 520-5068-01 Switch Detect.
520-5137-01 520-5300-00 520-5138-00 128 520-5052-00 520-5055-03 515-0173-00 515-0174-00 4-Ball Trough 500-6775-00
X 32 Dots Dual OPTO Dual OPTO over Up-Kicker OPTO Trans.
Grand Prix
Miscellaneous 520-5235-03 OPTO Transmitter / Receiver for UK ONLY 999 (Qty. 16)
Aux. Driver Bd.
PC Boards: X3 Aux. Drvr Amplifier PCB 520-5239-01 520-5068-01 Switch Detect.

*DPH ,2 3RZHU &38  'LVS 3RZHU 'RW 0DWUL[ 'XDO 2372 'XDO 2372 'XDO 2372 2372 7UDQVFHLYHU
1DPH 'ULYHU 6RXQG 6XSSO\ 'LVSOD\ 7UDQVPLWWHU 5HFHLYHU 7UDQVFHLYHU 0LVFHOODQHRXV
520-5249-00 520-5246-00 520-5138-00 520-5052-00 515-0173-00 515-0174-00 520-5251-00 ’U’ 1/per PCB
World Poker Backbox Backbox Backbox 128 X 32 Dots 4-Ball Trough 4-Ball Trough 500-6775-00 Jail Bars Up Ace/Hole Mech
Tour• 4 Switch Pairs
(WPT) Miscellaneous 520-5254-00 520-5250-14 520-5239-01 520-5247-00 520-5248-00 (Qty. 8) 520-5252-04 ’U’ 4/per PCB
PCBs : 50V Step-Up Drv 14LED 5X7 Disp. OPTO Amplifier Ace/Hole Mech Ace/Hole Mech Drop Targets 4- & 8- Banks
The 520-5249-00 520-5246-00 520-5138-00 520-5052-00
Simpsons• Back Door Back Door Cabinet Rear 128 X 32 Dots 520-5253-00-ASY
Kooky Coin Drop
Miscellaneous 515-5742-00 500-6700-00 (Qty. 11)
Carnival PCBs : Shaker PCB Relay (incl. Wiring + Conn.)
520-5249-00 520-5246-00 520-5138-00 520-5052-00 515-0173-00 515-0174-00
©Disney’s Backbox Backbox Backbox 128 X 32 Dots 4-Ball Trough 4-Ball Trough 500-6775-00
Pirates 5 Switch Pairs
of the Miscellaneous 520-5239-01 511-5024-03
Caribbean PCBs : OPTO Amp. (X3) Relay (incl. Wiring + Conn.) (Qty. 10)
520-5238-00 : H-E-A-R-T LED PCB
520-5249-00 520-5246-00 520-5138-00 520-5052-00 515-0173-00 515-0174-00 500-6775-00 520-5252-01 ’U’ 1/per PCB
Backbox Backbox Backbox 128 X 32 Dots 4-Ball Trough 4-Ball Trough 3 Switch Pairs
(Qty. 6) Drop Target 1-Bank
Family
Guy• Miscellaneous 520-5239-01 520-5261-00 511-5042-01 500-6775-01
PCBs : OPTO Amp. (X2) Stepper Motor Trgt. Sensor (X2) 1 Switch Pair 520-5252-04 ’U’ 4/per PCB
(Qty. 2) Drop Target 4-Bank
511-5046-00 : Mini Playfield Lamp PCB
520-5249-00 520-5246-00 520-5138-00 520-5052-00 515-0173-00 515-0174-00 500-6775-00
Backbox Backbox Backbox 128 X 32 Dots 4-Ball Trough 4-Ball Trough 3 Switch Pairs
Spider- (Qty. 6)
Man•
Miscellaneous 520-5239-01
PCBs : OPTO Amp. (X2)

%RDUG $SSHQGL['
7\SH7DEOH 
 $33(1',;'
%RDUG7\SH7DEOH
*DPH 1DPH )OLSSHU 6RXQG 3RZHU 6XSSO\ 'LVSOD\ ;'LJLW
initial: Master: 520-5004-00 plus:
2-Flipper 520-5002-00
x Laser War 520-5005-00 (Qty. 2): 7 Digit Alpha/Numeric
Board Not Required replaced with: 520-5006-00 (Qty. 2): 7 Digit Numeric
520-5002-02 520-5007-00 (Qty. 1): 4 Digit Numeric
520-5002-01 was not used.
x Secret Service 3-Flipper
x Torpedo Alley Board Not Required
520-5000-00 520-5014-01
x Time Machine 2-Flipper 7 Digit Alpha/Numeric Combined
Board Not Required
x Playboy 35th Anniversary * 520-5002-02
520-5033-00
x ABC Monday Night Football * 2-Flipper
x Robocop (*only for 100 games of 520-5030-00
x Phantom of the Opera 16 Digit Alpha/Numeric Combined
x Back to the Future Playboy 35th Anniv. &
x The Simpsons ABC Mon. Night Football) 520-5002-03

*DPH )OLSSHU 6RXQG 3RZHU 'RW 0DWUL[ 'LVSOD\ 2372 2372 2372
1DPH 6XSSO\ 'LVSOD\ &RQWUROOHU 7UDQVPLWWHU 5HFHLYHU $SOOLFDWLRQ
x Checkpoint
x Teenage 520-5002-03
Mutant Ninja
Turtles 520-5042-00
520-5047-00
x Batman 128 X 16
x Star Trek 520-5033-00
25th Anniv.
x Hook 2-Flipper 520-5050-01
x Lethal
Weapon 3
x Star Wars 520-5047-01
x Rocky & Bull-
winkle & Friends 520-5050-02 520-5055-00
x Jurassic Park 520-5076-00
3-Flipper
x Last Action 520-5070-00 520-5052-00
Hero 2-Flipper 128 X 32
520-5050-03
x Tales from
the Crypt 520-5076-00 520-5047-02
x The Who’s 3-Flipper
Tommy 520-5055-01
x WWF Royal 520-5070 / 5080 -00
520-5077-00
Rumble 4-Flipper (2X2)
x Guns N’
Roses 520-5076-00
x Maverick 3-Flipper 520-5102-00 520-5103-00 Paddle Boat
520-5050-03
Single OPTO Single OPTO Wheel Enter
x Mary Shelley’s 520-5076-00
Frankenstein 520-5077-00 520-5075-00
3-Flipper 520-5047-03 520-5092-01
520-5070 / 5080 -00 192 X 64 520-5124-00 520-5125-00 5-Ball Trough
x Baywatch
4-Flipper (2X2) Single OPTO Single OPTO over Up-Kicker
520-5126-02
x Batman 520-5076-00 520-5124-00 520-5125-00 4-Ball Trough
Forever 3-Flipper Single OPTO Single OPTO over Up-Kicker
Miscellaneous Boards (Lamp Boards & Relay Boards) not listed above can be found in each individual game manual.

$SSHQGL[' %RDUG
 7\SH7DEOH
 $33(1',;(
)OLSSHU&RLO :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH
„ < _  ^†‡‡†Z' '    _  „ˆ @ Z|' € ' '|‰_    ˆZ' Z|   ' '| 

}ƒ@ƒ' „}†?'??'}' ‡ @' „'??@ ‘ ?'??'}' ‡

 |}ˆ  @„:‡ ?'? ˆ‰     |}ˆ  @„:‡ ?'? ˆ‰   
  |‘ : ‘’‘Ž“‘”|ŽZ Š |‹‹Š „  ›  : ‘’‘Ž“‘”‘ŽZ Š |‹Œ}Ž˜›|–‘‘–|“–‘–Š 
  |• : ‘’‘Ž“‘|•ŽZ Š Ž‘‘Š „ |Œ‹Š „\ ž ˆŠž
:  ’ ”— : ‘’‘Ž“‘||ŽZ Š |‹‹ƒ{ƒ'}Ž˜Š “
  ””
:
‘’‘Ž“‘|•ŽZ Š Ž‘\Š \_|‹}Š „
Ž‘\Š \_|‹}Š „   ’”‘ :
  }| ‘’‘Ž“‘””ŽZ Š
  }– : ‘’‘Ž“‘|’ŽZ Š Ž‘‘Š „  › }–“ : ‘’‘Ž“‘”‘ŽZ Š Ž”‘„Š „Ÿˆ˜˜ž
  : Ž‘\Š \_|‹}Š „ |‹|ƒŠ 
}— ‘’‘Ž“‘‘|ŽZ Š
|˜||™˜|ƒŠ    –” : ‘’‘Ž“‘}”ŽZ Š Ž‘\Š\_|‹}Š„Ÿˆ˜Ž{ ž
  : Ž‘‘Š „ |Š 
–‘
:
‘’‘Ž“‘‘“ŽZ Š
 ’ ”– : ‘’‘Ž“‘‘—ŽZ Š Ž‘‘ƒ{ƒ'}Ž˜Š “
  }— ‘’‘Ž“‘}•ŽZ Š Ž‘}Š „
  •“‘ :
 › : Ž‘”Š „|Œ‹˜|–™˜
“‘
:
‘’‘Ž“‘‘”ŽZ Š
 ’ }‘ : ‘’‘Ž“‘|}ŽZ Š Ž‘‘ƒ{{ƒ'Š „
 › ““ ‘’‘Ž“‘}—ŽZ Š Ž‘\Š \_|‹}Š „
Z ‹‹|Ž‹ŽŒ|‹Œ˜||™˜   š}“ :
:  ’ ”– : ‘’‘Ž“‘|”ŽZ Š Ž‘‘ƒ{{ƒ'Š „
  ’}
:
‘’‘Ž“‘}–ŽZ Š Ž‘‘Š \_
Ž‘\Š \_|‹}Š „   ’‘“ :
  |‘} ‘’‘Ž“‘––ŽZ Š
|˜||™˜|ƒŠ   › –‘“ : ‘’‘Ž“‘”‘ŽZ Š Ž}‘Š „{ ˆˆž
   |–” :
‘’‘Ž“‘‘}ŽZ Š Ž‘„Š „   “| : ‘’‘Ž“‘}‘ŽZ Š Ž‘„Š „ {ˆž
|ƒŠ 
  |–• :
‘’‘Ž“‘|“ŽZ Š Ž‘‘Š \_
 \^_  >~Z|<'' •|  : ‘’‘Ž“‘‘šŽZ Š Ž‘‘Š „\˜ ž
  ŽŒŒ|Ž‹‚Œ|‹‹
   |—} :
‘’‘Ž“‘‘–ŽZ Š Ž‘\Š \_|‹}Š „   ––  : ‘’‘Ž“‘—”ŽZ Š Ž‘‘Š „\˜ˆž
›  }}— :
‘’‘Ž“‘|—ŽZ Š Ž‘‘Š „   ’“  : ‘’‘Ž“‘”“ŽZ Š Ž‘‘Š „\˜ˆž
@ƒ'{‘''' „}??'}' ‡    : ‘’‘Ž“‘—•ŽZ Š Ž‘„Š „ ˆŠž
  ”’ : ‘’‘Ž“‘—–ŽZ Š Ž‘”˜ƒ|–™˜˜    : ‘’‘Ž“‘—šŽZ Š Ž‘„Š „¡^„ˆž
   –} : ‘’‘Ž“‘–”ŽZ Š Ž‘‘˜ƒ—™˜˜  |}š  : ‘’‘Ž“‘–|ŽZ Š Ž‘„Š „\˜ˆŽ{ ˆˆž
|‹Œ˜ƒ|”™˜˜ ''' „@ }`}@'???'}' ‡
  š‘ : ‘’‘Ž“‘—|ŽZ Š Ž‘‘˜ƒ—™˜   ›   : ‘’‘Ž“‘–—ŽZ Š Ž‘|Š „
›  |“” : ‘’‘Ž“‘“’ŽZ Š Ž‘‘˜›Š ›?  ?    ||“ : ‘’‘Ž“‘–—ŽZ Š Ž‘‘Š „
   “”‘ : ‘’‘Ž“‘Ž’Ž‘‘Š    ˜›Š › ?    : “‘‘Ž—’•—Ž‘| ˜Š —™˜??
‘’‘Ž“‘ŽŽŽ‘‘Š ’‘œ˜›Š ›?  ?  ›  : ‘’‘Ž“‘|‘ŽZ Š Ž‘‘Š „
  }@Z @    ' '|'     '    }“‘ : ŽŒŽ|”Œ”|‹ŒŠ ' Z !  Ÿˆ˜˜ž
  “‘” :
  <  Z'   <  @  Ž‘\Š \_|‹}Š „
$ 'Z       @    'Z|    <  ‘’‘Ž“‘}|ŽZ Š
Z `‚ ' Z Z' '|!Z   ƒ 
 @    $   _ '|    € ''    €“|“Ž—||‘Ž‘‘‚
 › “’‘ : ŽŒŽ|”Œ”|‹‹Š ' Z   ƒ ¡^„ˆž

)OLSSHU&RLO :KLWH6WDU%RDUG6\VWHP 2QO\ 7DEOH

'??@  '??@    \^
  
  ?'`{|}{@ `  ?'`{|}{@ ` 
@} @@'€} {??@} {??@@'€}
¬>* Ž J'=J'‘J=– ; q @^< %' ‘JZ*@;! ;
+ \—q ^>Z’$‹<“”Œ‹QŒŒ•‹ŒŒ ?   •  \<? “? =  + • 
  –“–\•–œ—\–
„œ    ¤$ ‹Š'
>}X €<  €< 
  –“–\•–œ—\–
X    ¤$ ‹Š' >}X €<  €< 
–“–\•–—–\—– –“–\•–œ—\–
    › ¤$$‡ˆ   ¤$ ‹Š' €<  €< 
›‡ –“–\•–œ—\– –“–\•–—–\œ–
    ‚   ¤$ ‹Š' >}X €<   › ‹Š'
>  –“–\•–œ—\– –“–\•–—–\—–
†    ¤$ ‹Š'  › ¤$$‡ˆ €<  €< 
>¡  \ –“–\•–œ—\–
>  X   †    ¤$ ‹Š' >}X €<  €< 
^ ¡ ‡ –“–\•–œ—\–
 '_ †    ¤$ ‹Š' >}X €<  €< 
 –“–\•–œ—\–
\Z  †    ¤$ ‹Š' >}X €<  €< 
>   –“–\•–œ–\– –“–\•–œ—\–
 † ‚   ‡Š'‹ >}X €<    ¤$ ‹Š'
{  –“–\•–œ–\–
€   ¨ †    ‡Š'‹ >}X €<  €< 
^  –“–\•–œ–\– –“–\•–œ—\–
>  †    ‡Š'‹   ¤$ ‹Š' €<  €< 

  † –“–\•–œ—\–
   ¤$ ‹Š' >}X €<  €< 
> –“–\•–œ–\–
'_ †    ‡Š'‹ >}X €<  €< 
† % '€    =           '‹@'';'| ?      • 
% '€    ;         

$SSHQGL[( &RLO&URVV5HI*XLGH
 )OLSSHU&RLO7DEOH
 $33(1',;(
)OLSSHU&RLO :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH

FLIPPERS w/E.O.S. Switch FLIPPERS no E.O.S. Switch

GAME NAME Nº of
Flippers SPI Nº / GAUGE-TURNS / Color SPI Nº / GAUGE-TURNS / Color
LOWER LEFT LOWER RIGHT UPPER LEFT UPPER RIGHT
Harley-Davidson® † and 090-5032-0T 090-5030-0T
1st through 3rd Editions 2 22-1080 -YEL-GRN- 23-1100 -ORANGE- Not Used Not Used
Striker Xtreme 090-5032-0T 090-5030-0T 090-5030-0T
(NFL) † 3 22-1080 -YEL-GRN- 23-1100 -ORANGE- 23-1100 -ORANGE- Not Used
Sharkey’s 090-5030-0T 090-5030-0T
Shootout † 3 23-1100 -ORANGE- SAME 23-1100 -ORANGE- Not Used
High Roller 090-5020-20T 090-5032-0T
Casino † 2 22-900 -YELLOW- 22-1080 -YEL-GRN- Not Used Not Used
Austin 090-5020-30 090-5030-0T
Powers• † 2 23-900 -GREEN- 23-1100 -ORANGE- Not Used Not Used

MONOPOLY® † 090-5032-0T 090-5062-0T

3 22-1080 -YEL-GRN- SAME Not Used 23-1500 -BLUE-
Playboy † 090-5030-0T
2 23-1100 -ORANGE- SAME Not Used Not Used
RollerCoaster 090-5032-0T 090-5067-0T 090-5068-0T
Tycoon• † 4 22-1080 -YEL-GRN- SAME 25-1400 -RED- 25-1600 -WHITE-
6** 090-5032-0T SAME Not Used 090-5030-0T
22-1080 -YEL-GRN- 23-1100 -ORANGE-
The Simpsons• (5 with )OLSSHUV 0LQL%DWV RQ QG /HYHO 3OD\ILHOG
Pinball Party † ** The Homer Head Assembly is affixed to an
Flipper Upr. Rt. Style Flipper ** 090-5020-20T 090-5041-00T 090-5025-00
Bats) (no E.O.S. Switch): 22-900 -YELLOW- 25-1800 -BLU-GRN- 24-1570 -BLUE-
Terminator® 3: 090-5032-0T
Rise of the Machines• † 2 22-1080 -YEL-GRN- SAME Not Used Not Used
The Lord 090-5020-20T
of the Rings• † 2 22-900 -YELLOW- SAME Not Used Not Used
Ripley’s 090-5032-0T 090-5067-00T
Believe It or Not!® † 3 22-1080 -YEL-GRN- SAME Not Used
25-1400 -RED-
Elvis® † 090-5020-20T 090-5020-30
4 22-900 -YELLOW- SAME
23-900 -GREEN-
SAME

The SopranosSM † 090-5032-0T

2 22-1080 -YEL-GRN- SAME Not Used Not Used

NASCAR® and [NDSE] † 090-5030-0T

2 23-1100 -ORANGE- SAME Not Used Not Used
Grand 090-5030-0T
Prix † 2 23-1100 -ORANGE- SAME Not Used Not Used
† Coil Part Numbers ending with a "T" signifies the Diode is on the top of the lug (on the coil-winding side); Coil Part Numbers ending with a "B" signifies the Diode is on the bottom of the lugs.

** S.A.M. System Games DO NOT REQUIRE DIODES. If you use a coil from your stock which has a diode, remove it ONLY FOR S.A.M. System Games.
World Poker Tour• 090-5032-ND 090-5030-ND
(WPT)** 4 22-1080 [ NO DIODE ]
SAME
23-1100 [ NO DIODE ]
SAME
©Disney’s Pirates of the 090-5030-ND
Caribbean** 2 23-1100 [ NO DIODE ] SAME Not Used Not Used
090-5030-ND SAME 090-5062-ND
Family 3 Norm. 23-1100 [ NO DIODE ] 23-1500 [ NO DIODE ]
Not Used
Guy• ** 090-5046-01-ND
2 Mini 27-950 [ NO DIODE ] SAME
Spider- 090-5032-ND 090-5032-ND
Man• ** 3 22-1080 [ NO DIODE ] SAME Not Used
22-1080 [ NO DIODE ]

&RLO&URVV5HI*XLGH $SSHQGL[(
)OLSSHU&RLO7DEOH 
 $33(1',;(
*HQHULF&RLO&URVV5HIHUHQFH*XLGH† ‡

)OLSSHU&RLO7DEOH‡ ††

1ž RI
)/,33(56 Z(26 6ZLWFK )/,33(56 QR (26 6ZLWFK
*$0( 1$0( )OLSSHUV 63, 1ž  *$8*(78516  &RORU 63, 1ž  *$8*(78516  &RORU
/2:(5 /()7 /2:(5 5,*+7 833(5 /()7 833(5 5,*+7
Laser War ‡  090-5011-00
22-750 / 30-2600 SAME Not Used Not Used

Secret Service ‡  090-5006-00

23-620 / 30-2600 SAME Not Used 090-5006-00
23-620 / 30-2600
Torpedo Alley ‡  090-5011-00
22-750 / 30-2600
090-5013-00
23-700 / 30-2600
Not Used 090-5012-00
23-800 / 30-2600
Time Machine ‡  090-5011-00
22-750 / 30-2600
SAME Not Used Not Used
‡ These coils are dual-wound.

Playboy 35th Anniversary ††  090-5020-02

22-900 -YEL-YEL-
SAME Not Used Not Used

ABC Monday Night Football ††  090-5020-02

22-900 -YEL-YEL-
SAME Not Used Not Used
†† A very small % of these games used a 090-5020-20 coil which used a proto-type Solid State Flipper System. The two types of coils both are 22-900 coils; the only difference is the
addition of the 1N5404 Diode on the (-02) coils which was used in the Deger Design.

Robocop  090-5020-20
22-900 -YEL-YEL-
SAME Not Used Not Used

Phantom of the Opera  090-5020-20

22-900 -YEL-YEL-
SAME Not Used Not Used

Back to the Future  090-5020-20

22-900 -YEL-YEL-
SAME Not Used Not Used

The Simpsons  090-5020-20

22-900 -YEL-YEL- SAME Not Used Not Used

Checkpoint  090-5020-20
22-900 -YEL-YEL- SAME Not Used Not Used

Teenage Mutant Ninja Turtles  090-5020-30

23-900 -GRN-GRN- SAME Not Used Not Used

Batman  090-5020-30
23-900 -GRN-GRN- SAME Not Used Not Used

Star Trek 25th Anniversary  090-5020-30

23-900 -GRN-GRN- SAME Not Used Not Used

Hook  090-5030-00
23-1100 -ORG-ORG-
090-5020-30
23-900 -GRN-GRN-
Not Used Not Used

Lethal Weapon 3  090-5030-00

23-1100 -ORG-ORG-
SAME Not Used Not Used

Star Wars  090-5032-00

22-1080 -YEL-GRN-
SAME Not Used Not Used
Rocky & Bullwinkle & Friends
 090-5020-30
23-900 -GRN-GRN-
SAME Not Used Not Used
Jurassic Park
 090-5020-30
23-900 -GRN-GRN-
SAME Not Used 090-5030-00
23-1100 -ORG-ORG-
Table continued on the next page.

$SSHQGL[( &RLO&URVV5HI*XLGH
 )OLSSHU&RLO7DEOH
 $33(1',;(
)OLSSHU&RLO7DEOH†

1ž RI
)/,33(56 Z(26 6ZLWFK )/,33(56 QR (26 6ZLWFK
*$0( 1$0( )OLSSHUV 63, 1ž  *$8*(78516  &RORU 63, 1ž  *$8*(78516  &RORU
/2:(5 /()7 /2:(5 5,*+7 833(5 /()7 833(5 5,*+7
Last Action Hero  090-5020-30
23-900 -GRN-GRN- SAME Not Used Not Used

Tales from the Crypt  090-5032-00

22-1080 -YEL-GRN- SAME Not Used 090-5041-00
25-1800 -BLU-GRN-
The Who’s Tommy  090-5020-30
23-900 -GRN-GRN- SAME 090-5041-00
25-1800 -BLU-GRN- Not Used

WWF Royal Rumble  090-5032-00

22-1080 -YEL-GRN- SAME 090-5041-00
25-1800 -BLU-GRN- SAME

Guns N’ Roses  090-5032-00

22-1080 -YEL-GRN-
SAME 090-5030-00
23-1100 -ORG-ORG- Not Used

Maverick  090-5032-00
22-1080 -YEL-GRN SAME Not Used 090-5032-00
22-1080 -YEL-GRN-
Mary Shelley’s Frankenstein  090-5030-00
23-1100 -ORG-ORG- SAME Not Used 090-5030-00
23-1100 -ORG-ORG-
Baywatch  090-5030-00
23-1100 -ORG-ORG-
090-5020-30
23-900 -GRN-GRN-
090-5025-00
24-1570 -See Note-
090-5030-00
23-1100 -ORG-ORG-
Batman Forever  090-5032-00
22-1080 -YEL-GRN-
090-5020-20
22-900 -YEL-YEL- Not Used 090-5020-30
23-900 -GRN-GRN-
Apollo 13  090-5032-00
22-1080 -YEL-GRN-
SAME Not Used Not Used

Golden Eye  090-5032-00

22-1080 -YEL-GRN- SAME Not Used Not Used

Twister  090-5020-20
22-900 -YEL-YEL-
090-5032-00
22-1080 -YEL-GRN- Not Used Not Used

ID4: Independence Day  090-5032-00

22-1080 -YEL-GRN- SAME Not Used 090-5020-30
23-900 -GRN-GRN-
Space Jam †  090-5032-00T
22-1080 -YEL-GRN-
090-5020-20T
22-900 -YEL-YEL- Not Used Not Used
The Star Wars Trilogy -
Special Edition †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used Not Used

The Lost World: Jurassic Park †  090-5032-00T

22-1080 -YEL-GRN- SAME Not Used Not Used

The X-Files †  090-5032-00T

22-1080 -YEL-GRN- SAME Not Used Not Used

Starship Troopers †  090-5030-00T

23-1100 -ORG-ORG- SAME Not Used 090-5032-00T
22-1080 -YEL-GRN-
Viper Night Drivin’ †  090-5030-00T
23-1100 -ORG-ORG- SAME Not Used Not Used

Lost In Space †  090-5030-00T

23-1100 -ORG-ORG-
090-5032-00T
22-1080 -YEL-GRN- Not Used Not Used

Godzilla †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used Not Used

South Park †  090-5030-00T

23-1100 -ORG-ORG- SAME Not Used Not Used
Harley-Davidson® † and
Harley-Davidson® 2nd Ed. †  090-5032-00T
22-1080 -YEL-GRN-
090-5030-00T
23-1100 -ORG-ORG- Not Used Not Used

Striker Xtreme (NFL) †  090-5032-00T

22-1080 -YEL-GRN-
090-5030-00T
23-1100 -ORG-ORG-
090-5030-00T
23-1100 -ORG-ORG- Not Used

Sharkey’s Shootout †  090-5030-00T

23-1100 -ORG-ORG- SAME 090-5030-00T
23-1100 -ORG-ORG- Not Used

High Roller Casino †  090-5020-20T

22-900 -YEL-YEL-
090-5032-00T
23-1080 -YEL-GRN- Not Used Not Used

Austin Powers• †  090-5020-30

23-900 -GRN-GRN-
090-5030-00T
23-1100 -ORG-ORG- Not Used Not Used

MONOPOLY® †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used 090-5062-00T
23-1500 -BLU-BLU-
Playboy †  090-5030-00T
23-1100 -ORG-ORG- SAME Not Used Not Used

RollerCoaster Tycoon• †  090-5032-00T

22-1080 -YEL-GRN- SAME 090-5067-00T
25-1400 -RED-RED-
090-5068-00T
25-1600 -WHT-WHT
 090-5032-00T SAME Not Used 090-5030-00T
The Simpsons• Pinball Party †  ZLWK *
22-1080 -YEL-GRN-
The Homer Head Assembly is affixed to an
23-1100 -ORG-ORG-
Flippers (Mini-Bats) on 2nd Level Playfield:
)OLSSHU Upr. Rt. Style Flipper * 090-5020-20T 090-5041-00T 090-5025-00T
%DWV (no E.O.S. Switch): 22-900 -YEL-YEL- 25-1800 -BLU-GRN- 24-1570 -See Note-
Terminator® 3:
Rise of the Machines• †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used Not Used

The Lord of the Rings• †  090-5020-20T

22-900 -YEL-YEL- SAME Not Used Not Used
Ripley’s
Believe It or Not!® †  090-5032-00T
22-1080 -YEL-GRN- SAME Not Used 090-5067-00T
25-1400 -RED-RED-

† Coil Part Nºs ending with a "T" signifies the Diode is on the top of the lug (on the coil-winding side); Coil Part Nºs ending with a "B" signifies the Diode is on the bottom of the lugs.

&RLO&URVV5HI*XLGH $SSHQGL[(
)OLSSHU&RLO7DEOH 
 $33(1',;)
0RWRU6SHFLILFDWLRQ :KLWH6WDU%RDUG6\VWHP 2QO\ 7DEOH

*DPH 1DPH )XQFWLRQ 6SHFLILFDWLRQV 3DUW 1XPHU

$ _ @ }—›{% •„•\”œ˜œ\––

<= }  ”–‚œ¡”$'}%%¡ '  
ƒ } <  }  '  }—›{% •„•\”›˜†\––
$   ?  •–=”–‚œ¡”$'}%%¡ '  
>_   } –'*„–•{% –›„\•–—“\
„–}'—“•–$'}%¡ Z—ˆ!˜
‹€^ >  @ }—›{% •„•\”•—˜\––
^=$ }  ”–‚œ¡”$'}%¡ '  
>  }  '  }—›{% Œ?K‹XŒQŠ‹ŒŒ •„•\”œ›†\––
 }  •–=”–‚œ¡œ—•$'}%%¡ '  
=œ{_
@ _`Z  }  '  }—›{% Œ?K‹XŒXQ‹ŒŒ •„•\”•œ„\––
‘ ¡ ’ •–=”–‚œ¡œ”––$'}%¡ '  
&‰&€ƒ€‰^   ‚ >} –›„\•–›•\––
? =%  }  “?•QQ Z—ˆ!˜
%#Z ˆZ—™%#$

={_ˆ_=_^   \¡  @ }—›{% Œ?K‹XŒXš‹ŒŒ •„•\”œ˜œ\–„

^=$ }  ”–‚œ¡„–$'}%%¡ '  
> ¤% ^ _ }  '  }—–{% Œ?K‹XŒX“‹Œ• •„•\”†„•\–œ
=${ˆ_€ ^ <= }  “$'}€ \     '  
ž__   } –'*„–•{% –›„\•–—“\
>_ „–}'—“•–$'}%¡ Z—ˆ!˜
=Ÿ  \Z %  }  '  }—–{% –›„\•–•†\––
^ <= }  “$'}%%¡ Z—ˆ!˜
‚ >  ¤   >} •„•\”†“›\––
¡ @ „—{%›”¡ Œ?K‹XŒŠQ‹ŒŒ>  œ”–––‡„›­ '  
{_ƒ=_ƒ_ Z=$ }  ˆ‹'%     ‚>¯œ”˜”›\„— Š¨_ \¥{
™' >‡––›>  ‡„•± •œ–\••–œ\––
–#ˆ‘›—$–ˆ> ˆZ—™%#$

${&ƒ >  }  '  }—›{% Œ?K‹XŒ?Š‹ŒŒ •„•\”œ›†\––

 }  •–=”–‚œ¡œ—•$'}%%¡ '  
‹€¡ >_‡ }  ¯œ˜„„–”œ–}‘{ ’„—{% –›„\•–—“ 
œ„––$'}%¡ @$!—%‡ Z—ˆ!˜
%™—›œ ˆZ—™%#$

>_‡ }  ¯œ˜„„–”œ–}‘{ ’„—{% –›„\•–—“ 

†_^ ‰`€£ œ„––$'}%¡ @$!—%‡ Z—ˆ!˜
K ; •#'' }    —›{% Œ?K‹XŒ”Q‹ŒQ •„•\†–—•\––
^ <= }  —–$'}%%¡ '  
{__Ÿ{_~'$  ‘^  _’ }  ¯œ•“–„—{% Œ?K‹XŒ”X‹ŒŒ •„•\†–†„\––
^$ }  ”–$'} '  
_^ {{ } @ ‚ _ }} \X—›{% Œ?K‹XŒ”Š‹ŒŒ •„•\†–“•\––
$ }  •–=”–‚œ¡—–$'}%¡ '  
$ ¡ }  '  }—–{% Œ?K‹XŒ”š‹ŒŒ •„•\†„•œ\––
$ }  „†$'}%%¡ '  
†Š_ ‚ >  ¤   >} •„•\”†“›\––
<= $ > }  „—{%›”¡ Œ?K‹XŒŠQ‹ŒŒ>  œ”–––‡„›­ '  
^ <= }  ˆ‹'%     ‚>¯œ”˜”›\„— Š¨_¥{\
™' >‡––›>  ‡„•± •œ–\••–œ\–„
 }   }  '  }—›{% Œ?K‹XŒ”“‹ŒŒ •„•\†„›„\––
$ }  •–=”–‚—–$'}%%¡ '  
{œ_• ^ @  }—›{% Œ?K‹XŒšK‹ŒŒ •„•\†„†„\––
^$      •–=”–‚›¡„–$'}@ \     '  
X  ‚ _ }} \X—›{% Œ?K‹XŒ•Œ‹ŒŒ •„•\•“––\––
^ <= }  •–=”–‚”$'}%%¡ '  
Œƒ^£ } \Z ‘¡_ ’ }  '}¤@`¯†–––X ––„•“ –›„\•–˜œ\––
$ }  —–{%•–=”–‚˜•$'}%%=%%¡ Z—ˆ!˜
   @   } $XKKKXŒ‹K•š”—›{% –›„\•–˜”\–—
$ }  •–=”–‚„—$'}@ \     Z—ˆ!˜
%  }   }  '   •ŠšŒ}„—% –›„\•–†•\–›
^^ ? =%  }  „–=„—$'}%%=%%¡ Z—ˆ!˜
‚ >  ¤   >} •„•\”†“›\––
 >  „—{%›”¡ Œ?K‹XŒŠQ‹ŒŒ>  œ”–––‡„›­ '  
^ <= }  ˆ‹'%     ‚>¯œ”˜”›\„— Š¨_ \¥{
™' >‡––›>  ‡„•± •œ–\••–œ\––
‡>* Y‹ŒKY%  Z'>` @' %  ZŒ?K‹XŒQ“## %  Z XKX‹Xš“•‹ŒŒ
—›%ˆ#Z—ˆˆ!˜#™%#$ˆˆ#%›œ#Z—%%˜XKX‹Xš“•#!
?      • 

$SSHQGL[) 0RWRU6SHFLILFDWLRQ
 7DEOH
 $33(1',;)
0RWRU6SHFLILFDWLRQ :KLWH6WDU%RDUG6\VWHP  6$06\VWHP 2QO\ 7DEOH

*DPH 1DPH )XQFWLRQ 6SHFLILFDWLRQV 3DUW 1XPEHU

ROLLERCOASTER TYCOON• (NO MOTOR USED)
THE SIMPSONS• PINBALL PARTY (NO MOTOR USED)
Terminator® 3: Backbox Ball Shooter Multi Products Motor 24VAC (041-5079-01) 515-7317-00
Rise of the Machines• Up/Down Movement 21 RPM CW incl. Connector

The Lord of the Rings• Balrog (Motor & Gate) Multi Prod. Motor 20VDC Series 600B (or equiv.) 041-5088-01
Open/Close Movement 50/60Hz 10 RPM Bi-Directional MOTOR ONLY
RIPLEY’S BELIEVE IT OR NOT!® (NO MOTOR USED)
Haydon Switch & Instrument, Inc. Stepper Motor 500-6809-00
Elvis• 12VDC 10W (041-5089-00), incl. Connector
Front/Back Movement (Non-Captive Shaft not included) Requires 7.25" Shaft:
Elvis® HSI #46868-12-002 530-5658-00
::: OPTIONAL 999 Multi #3811 0630 Motor (Vibrator) 12VDC 515-5893-01
Shaker (041-5029-01) 3100 RPM (w/DRL PTS) incl. Connector
The Sopranos SM Bada Bing! Girls x2 Autotrol Synchronous Motor 24VAC 4W 041-5092-00
Rotating Posts Movement 50/60Hz 45.7/54.9 RPM Bi-Directional w/1" Shaft + 12" Leads

NASCAR® and [NDSE] Back Panel Rotating (Car) Multi Products Motor & Gear Box 20VDC 041-5093-00
Windmill (Skill Ball Enter) Model #8000 (EX-04-073) 10 RPM MOTOR ONLY
Grand Prix Back Panel Rotating (Car) Multi Products Motor & Gear Box 20VDC 041-5093-00
Windmill (Skill Ball Enter) Model #8000 (EX-04-073) 10 RPM MOTOR ONLY

World Poker Tour• (WPT) (NO MOTOR USED)

Bart on Skateboard Multi Products Motor with Crank 24VAC 500-6947-01
Left/Right Movement (041-5095-01) 50/60Hz 3W 14 RPM incl. Connector
The Simpons• Left & Right Ramps Multi Products Motor 24VAC (041-5048-01) 515-7558-00
Kooky Carnival Up/Down Movement 50/60Hz 3W 15 RPM CCW (Qty. 2 in game) incl. Connector
Shaker Multi #3811 0630 Motor (Vibrator) 12VDC 041-5029-01
(details in SKC Manual, Page 24) 3100 RPM (w/DRL PTS) MOTOR ONLY
Multi #3811R 0630 Motor (Vibrator) 12VDC
Spinning
(041-5029-04) 3100 RPM (w/DRL PTS) 511-5024-04
©Disney’s Pirates Disk
-04 is RoHS compliant; can substitute with -01 domestic incl. Connector
of the Caribbean Pirate Ship Multi Products Motor & Gear Box 24VDC 041-5101-00
Sinking/Raising Movement Model #7000-DCM 12 RPM MOTOR ONLY
Family Guy• Stewie Figurine Stepper Motor NPM PF35T-48D4STD 5V RVB 511-5043-00
Left & Right Movement (041-5102-00 Reference Only) incl. Connector
Doc Ock, Sandman & 3-Bank Sync. Motor 24VAC 50/60Hz 3W 12 RPM CW 511-5063-00
Up/Down Movement (041-5103-00 Reference Only) incl. Connector
Spider-Man• ::: OPTIONAL 999 Multi #3811R 0630 Motor (Vibrator) 12VDC
515-5893-01
Shaker Motor Kit (041-5029-04) 3100 RPM (w/DRL PTS)
502-5027-00 -04 is RoHS compliant; can substitute with -01 domestic incl. Connector

0RWRU6SHFLILFDWLRQ $SSHQGL[)
7DEOH 
 $33(1',;)
0RWRU6SHFLILFDWLRQ7DEOH
The following table only list games that used motors. Part Numbers starting with "515-" will include the Wiring Harness & Connector.
*DPH 1DPH )XQFWLRQ 6SHFLILFDWLRQV 3DUW 1ž
Goal Post Motor 24v A.C.
ABC Monday Night Football Up/Down Movement 60 RPM CW 515-5222-00
Organ Bowman Motor 24v
Phantom of the Opera Up/Down Movement 60Hz 3W 11 RPM CCW 515-5256-00
Mag Wheel
(in Backbox) Motor D.C. (KEN) 041-5005-00
Checkpoint
Johnson Motor
Shaker (Vibrator) 041-5002-00
Spinning Pizza Ball Gear Motor 24v A.C.
Teenage Mutant Ninja Turtles Deflector 325 RPM CW 515-5397-00
Bar Target Bowman Motor 24v
Batman Up/Down Movement 60Hz 3W 11 RPM CCW 515-5256-00
Bowman Motor 24v
Swinging Target
221e2 RPM 515-5534-00
Star Trek 25th Anniversary Gear Motor 24v A.C.
Transporter F/X
31e2 RPM 500-5421-00
Cooling Fan 41e2" Motor 12v
(for Transporter F/X) 041-5014-00
Motor 21e2
v A.C.
Lethal Weapon 3 Spinning Light
4000 RPM CCW 041-5017-00
Bar Target Bowman Motor 24v
Up/Down Movement 60hz 3W 11 RPM CCW 515-5256-00
Star Wars R2D2 Robot Bowman Motor 24v A.C.
Left/Right Movement 221e2 RPM CW 515-5571-00
Death Star Bowman "G" Motor 24v A.C.
Rotation 60Hz 6 RPM CW 515-5570-00
Nell Log "Cutting Blade" Autotrol Model E Motor 24v
Rocky & Bullwinkle & Friends Forward/Back Movement 60hz 4W 3 RPM CCW 041-5023-00
T-Rex Multi Motor 5v D.C.
Left/Right Movement 041-5025-00
Jurassic Park T-Rex Bowman Motor 24v
Up/Down Movement 11 RPM CW 041-5026-00
Johnson Motor
Shaker
(Vibrator) 041-5002-00
Crane Multi Products Motor 12v D.C.
Left/Right Movement #3312 OSC 041-5027-00
Last Action Hero
Johnson Motor (Vibrator) 10.5v D.C.
Shaker 10 AMP 2950 RPM CW 041-5029-00
Tombstone Bowman Motor 24v A.C.
Up/Down Movement 6 RPM CCW 515-5900-00
Tales from the Crypt
Johnson Motor (Vibrator) 10.5v D.C.
Shaker
10 AMP 2950 RPM CW 041-5029-00
Mirror Bowman Motor 24v A.C.
Up/Down Movement 6 RPM CCW 515-5900-00
The Who’s Tommy Servo Motor
Flipper Blinders (94102) 041-5032-00
Spinning Airplane
Propellers Motor D.C. 041-5033-00
Johnson Motor (Vibrator) 10.5v D.C.
WWF Royal Rumble Shaker
10 AMP 2950 RPM CW 041-5029-00
Motor 24v A.C.
Maverick, The Movie Turning Paddle Wheel
10 RPM 041-5036-00
Creature Head
Mary Shelley’s Frankenstein Left/Right Movement Servo Motor (94102) 041-5032-00
Cannon Bowman Motor 24v A.C.
Batman Forever Left/Right Movement 60Hz 3W 6 RPM CCW 515-6383-00

$SSHQGL[) 0RWRU6SHFLILFDWLRQ
 7DEOH
 $33(1',;*
3DUW1XPEHU3UHIL[&ODVVLILFDWLRQ&RGHV
I. Electrical Source, Energy & Signal Converters VI. Handles, Locks, Catches, Latches, Keys
010- Transformers 355- Handles, Locks, Catches, Latches
031- Speakers and Keys
090- Solenoids (Coils)
150- Filters, Outlets, Varistors, Thermistors VII. Fabricated Parts
200- Fuses 390- Hinges
501- Coin Doors
II. Conductors, Connectors & Insulators 515- Sub-Assemblies
034- Line Cords 520- Printed Circuit Boards (PCBs)
036- Cable Assemblies & Wiring Harnesses 522- Display Glass
041- Motors 525- Wood Parts
045- Connectors (All Types) 530- Screw Machined Parts
055- Lugs (M/F), Pins (M/F), Discs, 535- Fabricated Parts
Ring Terminals, 545- Molded (Extruded) Plastic and
Terminal Strips, etc. Rubber Parts (Rings, Sleeves, etc.)
060- Polarizing Keys and Conn. Covers 550- Molded (Inserts)
077- Lamp Sockets
VIII. In-House Assemblies
III. Circuits & Circuit Elements 500- End Product (Systems and Models)
100- ICs 502- Kits (Created In-House)
110- Transistors 505- Cabinets (complete)
112- Diodes (All Types including LEDs & Modules) 510- Riveted Sub-Assemblies (In-House)
121- Resistors 511- Sub-Assemblies (In-House)
123- Resistors (Variable & Adjustable) 515- Sub-Assemblies*
124- Regulators & Bridge Rectifiers *2 or more 515-’s but still a sub-assembly.
125- Capacitors (Radial Lytics & Ferrites)
126- Piezo Crystal IX. Bulk Materials
127- Heatsinks 600- Braided Wire & Ground Straps
130- Capacitors (Tecates & Ceramics) 601- Stranded Wire
140- Oscillators (Clocks/Crystals) 602- Ribbon Cable
165- Light Bulbs 604- Telephone Line Cord
180- Switches 605- Sleeving (Shrink Tubing)
181- Switch Membranes (Pads) & Piezo Sensors 625- Velcro (non-adhesive)
190- Relays 626- Foam Rubber, Foam Pads, Rubber
960- EPROM (Raw Part) Bumpers (Blue Pads), Tape (All Types)
965- EPROM (Programmed Part) Velcro (adhesive) and String / Rope
IV. Bolts, Screws, Nuts, Washers & Nails X. Miscellaneous
231- Bolts 000- Tools (see also 777-) and Supplies
232- Screws (Pan Head) 040- Clamps, Ties & Clips
234- Screws (HWH) 042- Pulleys
237- Screws (Misc.) 091- Coin Mechs
240- Nuts (Misc.) 205- Fuse Holders
242- Washers (Flat, Round) 631- Staples
244- Washers (Split Lock) 660- Glass (Playfield, Backglass, etc.)
245- Nyliners 675- Cleaners
246- Washers (Lockers, External Tooth) 705- Packing & Shipping Items
281- Nails 755- Instruction, Coin Cards, Ins. Sheets
756- Information Sheets, Service Bulletins,
V. Mechanical Components Instruction Sheets in Kits and Templates
249- Rivets 777- Tools (Wrenches and Drivers)
251- Pins (Dowel), Finishing Nails, Hairpins, 780- Manuals
Spring Pins and Clevis Pins 802- Decal Kits (comprised of 820’s)
254- Stand-Offs, Spacers and Shims 820- Decals, Mylar and Labels (Sheets/Sets)
260- Steel Ball (All Types Steel, Glowing, Delrin, etc.) 803- Plastic Kits (comprised of 830’s)
265- Springs (Extension) 830- Plastic Pieces (Butyrate Sheets/Sets)
266- Springs (Compression) 880- Toys, Models, Figurines, etc.
267- Springs (Torsion) 900- Game Posters
269- Springs (Washers - Belleville, Wave)
270- Retaining Rings
280- Grommets, Bushings and Nyliners
283- Bearings

$SSHQGL[* 3DUW1XPEHU3UHIL[
 &ODVVLILFDWLRQ&RGHV
 $33(1',;+
3OD\ILHOG,QVHUWV 3ODVWLF/LJKW&RYHUV

{{_ =Š; Š= =Š; Š= =Š; Š= =Š; Š= =Š; Š=
=Š; Š= &Š $Š &Š $Š &Š $Š &Š $Š &Š $Š

•e˜\ª œe›\ª \ª  œ’„”\ª  „e—\ª

=&$

  ŸŸ   ŸŸ   ŸŸ   ŸŸ   ŸŸ

=Š; Š= =Š; Š= $&' $&' $&' $&'
&Š $Š &Š $Š &Š $Š &Š $Š &Š $Š &Š $Š

 „e›\ª  œe›\ª œe›\ª \ª  œ’„”\ª  „e—\ª

  ŸŸ   ŸŸ   ŸŸ   ŸŸ  › ŸŸ   ŸŸ

$&' $&' =&$ =&$ Š‡$$‡Š ˆ†&==Š
&Š $Š &Š $Š &Š $Š \« Š ; ==‡';  '@ '

 „e›\ª  œe›\ª \ª —\

  ŸŸ   ŸŸ   ŸŸ  › ŸŸ   ŸŸ   

=&$ =&$ =Š; Š= $&' $&' $&'
Š='‹ $Š Š='‹ $Š Š='‹ $Š Š='‹ $Š Š='‹ $Š Š='‹ $Š

 „e—\Ÿœe›\  •e˜\Ÿ „e—\  „e›\Ÿ „e˜\  „e›\Ÿ „e˜\  „e›\Ÿ „e—\ \Ÿ „e—\

  ŸŸ    ŸŸ   ŸŸ  › ŸŸ    ŸŸ   ŸŸ

=Š; Š= =Š; Š= Œ&'& ;$ $&' ;''
Œ&'&†&$‰ $Š‹†&$‰ †‡=‰‡‹ †‡=‰‡‹ †‡=‰‡‹

\Ÿ\  •’˜\ „e—\ „e—\

  ŸŸ   ŸŸ   ŸŸ   ŸŸ   ŸŸ   ŸŸ

=Š; Š= =Š; Š= =Š; Š= =Š; Š= =Š; Š= =Š; Š=
ŠŠ‡ˆ Œ$$ ŠŠ‡ˆ $Š‹ ŠŠ‡ˆ †‰ ŠŠ‡ˆ †‰ ; $$= =Š&'‹$
Œ$$ $Š‹

  ŸŸ    ŸŸ   ŸŸ   ŸŸ   ŸŸ   ŸŸ
>* —  ' @* %J J ;*'*'  
   * '         ‘           ’  —\    
     ŸŸ               
 —\           ˆ J *'*

3/$67,& 3$57 &2/25 &+$57

1¬ &RORU 1¬ &RORU 1¬ &RORU 1¬ &RORU 1¬ &RORU 1¬ &RORU
 ;> %     §  › '   Z @   ^   
 %     ?   Z ?       
 $  @   ¡   Z      @

3OD\ILHOG,QVHUWV $SSHQGL[+
3ODVWLF/LJKW&RYHUV 
 $33(1',;,
$QWL/RIW6WDQG8S7DUJH WV

$SSHQGL[, 6WDQG8S
 7DUJHWV
 $33(1',;,
0RGX ODU6WDQG8S7DUJHWV
Š
² 7R5HSODFHWKH©7DUJHW,QVHUWª
 ³ RUFKDQJH7DUJHW2ULHQWDWLRQ
5  
   ;0>*Z   \  \>''
$ €‘ ’   '     
}     ² ³²+Ÿ'J ˜+˜
      ˆJ*%%'–'@' 
J  ' @;Z~ ²
 ³ \  \>''€

}  •  ˆ   –ˆ^ — Š

Œ  __`_   ‰‡  ?  
__      `   `? ? ‰
_      ? ™™   _‰

   „
^?    ?  
  __ 
 €`? ‚ ‡ ?
7DNH1RWH _ `  ?   
„ &{~        —  _‰ 
;J *'*'  
\ ŸŸ\      
 —\      
    % % 
'< @'; @‰
% ‘’| $‘@%X’|  ‘X’|
 ‘@’|  @ ‘%’| § ‘%’
›' ‘@’| Z    ‘@’
— Ž '  %‹™
—;<' <% '{< !<
'' 'ž! '

 ='‰ =Š‹=Š= ?'?@} 

} > \<€  •––\”„œ˜\
 > \<€‘ ’    ŸŸ
} > \<>  •––\”„œ“\
; > \<>‘ ’   › ŸŸ ‚ _   ?   ?     _
} > \<$     •––\”——˜\
 > \<$   ‘ ’   ŸŸ
_  ?   _‰ @  
} > \<$   •––\”–†•\
‰ > \<$ ‘ ’   Z   @  '|  ' ''Š| 
  ŸŸ

}> \<„>    •––\”„˜“\ Z'    Z‹<%'*„   
> \<„>  ‘ ’  › ŸŸ

6WDQG8S $SSHQGL[,
7DUJHWV 
 $33(1',;-
&RLQ&DUGV 86$ ,QWHUQDWLRQDO3ULFLQJ'HIDXOWV X)RU<HOORZ6WRFNDGG<WRWKH3DUW1XPEHU
If more than one Pricing Scheme is available for countries listed, the F. listed beside the option, denotes the Factory Default Setting.
FOR VIEWS OF THE LATEST or OPTIONAL USA, INTERNATIONAL / EURO AND CUSTOM COIN CARDS, VISIT OUR WEBSITE.
Not Shown USA 755-5400-10 Tournament Option $2 = X1; 755-5400-11 Tournament Option $1.50 = X1

USA 10 F. USA 10 USA 2-7 or CANADA FOR CUSTOM PRICING † USA 3 with ToPS• USA 5 with ToPS•
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5400-11 Front 755-5400-11 Back 755-5400-02 Front 755-5400-01, -02 or -04 Back 755-5400-03 or -09 Front 755-5400-03 Back / -08 Front
AUSTRALIA 1 F. AUSTRALIA 2 CROATIA FOR CUSTOM PRICING † DENMARK 1 F. DENMARK 2
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5406-00 Front 755-5406-00 Back 755-5410-00 Front 755-5410-00 Back 755-5402-00 Front 755-5402-00 Back
JAPAN 1 JAPAN 2 F. MIDDLE EAST ANY COUNTRY CAN USE NEW ZEALAND 1 F. NEW ZEALAND 2

755-5408-01 Front 755-5408-01 Back 755-5400-06 Front 755-5400-06 Back 755-5406-00 Back 755-5406-00 Front
NORWAY 1 F. NORWAY 2 RUSSIA F. RUSSIA (ALTERNATE) SOUTH AFRICA FOR CUSTOM PRICING †
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5403-01 Front 755-5403-01 Back 755-5411-00 Front 755-5411-00 Back 755-5409-01 Front 755-5409-01 Back
SWEDEN 1 F. SWEDEN 2 SWITZERLAND 1 F. SWITZERLAND 2 TAIWAN FOR CUSTOM PRICING †
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5404-00 Front 755-5404-00 Back 755-5405-00 Front 755-5405-00 Back 755-5412-00 Front 755-5412-00 Back
UK 1 UK 3 UK 5 F. FOR CUSTOM PRICING † Appendix J Notes:
1. Coin Card on Game is determined by original shipping
Backside is Blank country destination.
(Border Only) 2. Optional Coin Card(s), are available via your distributor or via
free download @ www.sternpinball.com/coinagecards.shtml.
Typeset your Older style Coin Cards (foreign or domestic) not available
Custom Pricing on our website or no longer available through your
distributor, are obsolete.
755-5407-00 Front 755-5407-00 Back 755-5407-01 Front 755-5407-01 Back 3. Coin Cards which have a Blank Backside can be used for
Not Shown EURO 755-5401-20 Tournament Custom (can fill in your own pricing). †Custom Pricing.

EURO 1 EURO 2 EURO 3 EURO 4 EURO 5 EURO 6

755-5401-01 1-Side Only 755-5401-02 1-Side Only 755-5401-03 1-Side Only 755-5401-04 1-Side Only 755-5401-05 1-Side Only 755-5401-06 1-Side Only
EURO 7 EURO 8 EURO 9 EURO 10 EURO 11 EURO 12

755-5401-07 1-Side Only 755-5401-08 1-Side Only 755-5401-09 1-Side Only 755-5401-10 1-Side Only 755-5401-11 1-Side Only 755-5401-12 1-Side Only
[(852)$&725<'()$8/76800$5<7$%/(\
EURO 1 EURO 2 EURO 3 EURO 4 EURO 5 EURO 6 EURO 7 EURO 8 EURO 9 EURO 10 EURO 11 EURO 12
BELGIUM GERMANY 2 NETHERLANDS GREECE FINLAND AUSTRIA FRANCE
ITALY 1 SPAIN
PORTUGAL

Section 3, Chapter 4, GO TO ADJUSTMENTS MENU, Adj. 18, Game Pricing, USA & International (non-Euro) and Euro 1-12 Summary &
International (Euro) Standard Pricing Select Tables, summarizes Standard or Custom Pricing Schemes & the Dip Switch Setting required.

$SSHQGL[- &RLQ&DUGV 86$

 ,QWQ·O3ULFLQJ'HIDXOWV
 */266$5<2)7(506
A Followed after a number means "Amp." or Ampage in an expres- P/F (Abbreviation) Playfield.
sion relating to an electrical object. (e.g. 8A). PIA LED (Acronym) Peripheral Interface Adapter Light Emitting Di-
AC (Acronym) Alternating Current. ode.. This is a diagnostic LED on the CPU; it should not be lit
during normal operation of a pinball game.
Adj. (Abbreviation) Adjustment(s).
Plumb Bob Tilt Weight on Tilt Assembly.
Assy. (Abbreviation) Assembly.
PPH (Abbreviation) Phillips Pan Head.
Au. (Abbreviation) Audit(s).
Pop(s) Another term for Turbo Bumper(s).
Bd. (Abbreviation) Board.
PPB (Acronym) Playfield Power Board ("Popcorn-Popping Bd.").
BOT (Abbreviation) Bottom.
PREV (Abbreviation) Previous.
Brkt. (Abbreviation) Bracket.
PSB (Abbreviation) Power Supply Board
Bridge Rectifier A configuration of a diode that allows current to
flow in one direction producing both positive and negative pul- RAM (Acronym) Random Access Memory. RAM can store input in-
sating DC Voltages. structions and supply output information.
Color Coding See Appendix H or I, Plastic Part Color Chart or Sec- Reflexive/Non-Reflexive Reflexive—Solenoid Drive Transistor is
tion 4, Chapter 1, Playfield - Plastic Posts & Spacers. enabled directly by a switch closure on the (Relating to CPU
Combination (Combo) [Shot] Any variable pinball shot(s) made Boards) solenoid assembly (Ver. 1/2).
Non-Reflexive—Solenoid Drive Transistor is enabled by the
successively. CPU after reading a switch closure in the Switch Matrix (Ver.
Conn. (Abbreviation) Connector. 3). Also note: All CPU Boards are backwards compatible (e.g.
Jurassic Park/Ver. 3 to Time Machine/ Ver. 2). Swapping a
CMOS Short for COSMOS (Complementary Symmetry M.O.S.); Ver. 2 Board to a Ver. 3 is not possible due to the special sole-
Complementary Metal-Oxide Semi-Conductor. noids section (i.e. Slingshots, Turbo Bumpers, etc.) changing
CN (Abbreviation) Connector (e.g. CN5-P3). from REFLEXIVE to NON-REFLEXIVE on Ver. 3 Boards.
CT (Abbreviation) Center. Relay An automatic switch operated by current in a coil.
DC (Abbreviation) Direct Current. ROM (Acronym) Read Only Memory. ROM cannot store input in-
structions but can supply output information. ROM can be pro-
DT (Abbreviation) Drop Target(s). grammed only once.
DOTS (Acronym) Diode On Terminal Strip. RMA (Abbreviation) Return Merchandise Authorization Number
EB (Abbreviation) Extra Ball. RT, Rt. or R. (Abbreviation) Right; ("R" at the end of Target Assy.
Eject Playfield surface device to kick ball back into play; Saucer. Part Nº signifies Target Insert is Reversed.)
EPROM (Acronym) Erasable Programmable Read Only Memory. RO (Abbreviation) Rollover (switches).
Can be erased using UV Light and re-programmed. Saucer See Eject.
e.g. (Abbreviation) Latin- Exempli gratia. For Example. Scoop A hole into the playfield. A metal scoop is in place to guide
EOS (Acronym) End-Of-Stroke (i.e. Switch for flipper). the ball into the kick-back under the playfield.
F (Abbreviation) Fuse (i.e. F23). Slam Tilt A switch which closes when the game is slammed into or
the Coin Door is slammed shut. Depending on adjustable set-
GA-Turn Gauge & Turn describing the windings on a coil (e.g. 23- tings, will cancel game in play when the number of closures re-
800, 23 is the gauge of wire and 800 is the amount of windings. quired is achieved.
G.I. (Abbreviation) General Illumination (Lamps). SMB (Abbreviation) Shaker Motor Board.
HWH (Abbreviation) Hex Washer Head. Solenoid A coil used for Electro Magnetic devices such as relays,
IC (Acronym) Integrated Circuit (As in after 24-Pin IC). flippers, slingshots, etc.
ID or I.D. (Acronym) Inside Dimension. SSFB (Abbreviation) Solid State Flipper Board.
i.e. (Abbreviation) Latin- Id est. That is. STEP Refers to the service switches on the coin door.
IO or I/O (Abbreviation) Input / Output (e.g. I/O Power Driver Bd.) Sub-Assy. (Abbreviation) Sub-Assembly.
LT, Lt. or L. (Abbreviation) Left. S-U or S/U (Abbreviation) Stand-Up ( targets).
Laser Kick A coil/plunger used above the playfield to kick pinball TM (Abbreviation) Trademark
back into play. Transfer [Shot] Maneuvering the ball in play from one flipper to the
LED (Acronym) Light Emitting Diode. other. With flipper in the up position and the ball cradled by that
flipper one would activate the flipper button in a quick repetitive
Loop [Shot] Continuously up a ramp and back to the flipper. manner to bounce the ball to the other side. Skilled players
Lwr. (Abbreviation) Lower. can rebound the ball off the slingshot.
Orbit [Shot] From the left or right flipper around the back rail of the Tri-Ball Three balls in play.
playfield back to the flipper. TTL (Abbreviation) Transistor-Transistor Logic
MB (Abbreviation) Magnet Board. Upr. (Abbreviation) Upper.
M-BALL or MBALL (Abbreviation) Multiball• More than 1 ball in V or v (Abbreviation) Volt(s).
game play.
Ver. (Abbreviation) Version.
MID (Abbreviation) Middle
VUK (Acronym) Vertical Up-Kicker (Super or Standard).
Non-Reflexive See Reflexive.
X (Abbreviation) "Times" A multiplier; also used in dimensions.
No. or Nº or # (Abbreviation) Number
X-Ball An undetermined number of ball(s) during game play.
NPF (Acronym) No Problem Found.
Zener Diode A semi-conductor diode used for voltage regulation.
N.C. or NC (Abbreviation) Normally Closed. Application depends on reverse break-down voltage.
N.O. or NO (Abbreviation) Normally Open. "-00B" "B" at the end of Coil Part Numbers signifies that the diode
NS (Abbreviation) Not Stuffed. (Use in Part Listings, Sec. 5) is attached to the bottom of the lug.
OD or O.D. (Abbreviation) Outside Dimension. "-00T" "T" at the end of Coil Part Numbers signifies that the diode
is attached to the top of the lug (the side nearest the coil-wind-
P (Abbreviation) Pin (e.g. CN5-P3). ing).
PCB (Acronym) Printed Circuit Board

*ORVVDU\ *ORVVDU\
RI7HUPV RI7HUPV
 S T E R N ® P I N B A L L , I N C . L I M I T E D W A R R A N T Y
Stern® Pinball, Inc., ("seller") warrants only to the initial purchaser of its products that the items listed below are free from
defects in material and workmanship under normal use and service for the w a r r a n t y p e r i o d s p e c i f i e d:
Printed Circuit Boards PCBs (game logic): 2 months
Dot Matrix Display P CB: 9 months

No other parts of seller’s product are warranted. Warranty periods are effective from the initial date of shipment from seller to
its authorized distributors.
Seller’s sole liability shall be, at its option, to repair or replace products which are returned to seller during the warranty
periods specified, provided:
1. Seller is notified promptly upon discovery by purchaser that stated products are defective.
2. Such products are properly packaged and then returned freight prepaid, to seller’s plant.
This warranty does not apply to any parts damaged during shipment and/or due to improper handling, or due to improper
installation or usage, or alteration. In no event shall the seller be liable for any anticipated profits, loss of profits, loss of use,
accidental or consequential damages or any other losses incurred by the customer in connection with the purchase of a
Stern® Pinball, Inc. product.
WARRANTY DIS CLAIME R
Except as specifically provided in a written contract between seller and purchaser, there are no other warranties, express or
implied, including any implied warranties of merchantability or fitness for a particular purpose.
C A U T I O N S , W A R N I N G S & N O T I C E S
CAUTION
For safety and reliability, substitute parts and equipment modifications are not recommended (and may void any
warranties). Use of non-Stern® Pinball Inc. parts or modifications of game circuitry, may adversely affect game play, or
may cause injuries. Transport pinball games with hinged backbox in the down position only! Always take great care when
servicing any game. Always read the service manual before replacing or servicing components. SUBSTITUTIONS OF
PARTS OR EQUIPMENT MODIFICATIONS may void FCC Type acceptance.
....Always disconnect the line voltage before servicing. Some parts may still hold current when unplugged.
WARNING
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance
with the instructions manual, may cause interference to radio communications. It has been tested and found to comply
with the limits for a class a computing device pursuant to SUBPART J OF PART 15 OF FCC RULES, which are designed to
provide reasonable protection against such interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to
take whatever measures may be required to correct the interference.
RF INTERFERENCE NOTICE: Cable harness placements and ground strap routing on this game have been designed to
keep RF radiation and conduction within levels accepted by the FCC rules. To maintain these levels, reposition harnesses
and reconnect ground straps to their original placements, if they become disconnected during maintenance.
(a) "The appliance has to be placed in a horizontal position."
(b) "This appliance is not to be cleaned by a Water Jet."
603335-7.12.1 (i) "Do not locate this appliance in an area where a Water Jet is used." (ii) "Do not clean this
appliance with a Water Jet." 60335-7.12.5 (b) If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
NOTICES
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED (EXCEPT WHERE
NOTED), USED OR OTHERWISE DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT WRITTEN CONSENT OF
STERN® PINBALL, INC. WARNING: PRODUCTS IN THIS MANUAL, THE COMPANY NAME AND DEVICES AND THE
DESIGN OF THE MANUAL ITSELF, ARE PROTECTED BY FEDERAL PATENTS (AND PATENTS PENDING), DESIGN
REGISTRATIONS, TRADEMARKS AND COPYRIGHTS. ACTION WILL BE TAKEN IN THE EVENT OF INFRINGEMENT OR
IMITATION. THE RIGHT IS RESERVED TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE.
© 2008 Manufactured by Stern® Pinball, Inc. Icon
Designs, ToPS• Logo, Bump N’ Win• Logo & all
related indicia are trademarks of Stern® Pinball, Inc.
All Rights Reserved. Manufactured in the USA.

"Multiball" is a registered trademark of Williams

Electronics Games, Inc. Used by permission. Indiana Jones• ©2008 Lucasfilm Ltd. & TM.
PCB Schematics (Section 5, Chapter 4) ©1995-2008 by Stern Pinball, Inc. All Rights Reserved.
CES (Creative Electronics & Software, Inc.) where noted.

If optional BETAbrite is purchased: Copyright ©2008. Music: “The Raiders March” (John T. Williams) ©Bantha Music (BMI) All Rights
BETA-brite and logo are trademarks of Adaptive Micro
Systems, Inc. registered in the USA Patent and Trade-
administered by Warner-Tamerlane Publishing Corp. All Rights Reserved.
mark Office. All Rights Reserved. Used by permission. "The Raiders March" courtesy of LUCASFILM LTD.
 SWITCH MATRIX GRID [ #1 – #64 ] {Switch Locations : next page}
CPU/ 01IC-U22A 02IC-U22B 03IC-U22C 04IC-U22D 05IC-U16A 06IC-U16B 07IC-U16C 08IC-U16D 09IC-U36A 10IC-U36B 11IC-U36C 12IC-U36D 13IC-U40A 14IC-U40B 15IC-U40C 16IC-U40D
Sound RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN RETURN
Board WHT-BRN WHT-RED WHT-ORG WHT-YEL WHT-GRN WHT-BLU WHT-VIO WHT-GRY TAN-BLK TAN-RED TAN-ORG TAN-YEL TAN-GRN TAN-BLU TAN-VIO TAN-WHT
J6-P9 J6-P8 J6-P7 J6-P6 J6-P5 J6-P3 J6-P2 J6-P1 J12-P9 J12-P8 J12-P7 J12-P6 J12-P4 J12-P3 J12-P2 J12-P1
SW. # 1 SW. # 2 SW. # 3 SW. # 4 SW. # 5 SW. # 6 SW. # 7 SW. # 8 SW. # 9 SW. # 10 SW. # 11 SW. # 12 SW. # 13 SW. # 14 SW. # 15 SW. # 16
01 X RIGHT TRANS- LEFT LEFT TOURNA-
Q1 ORBIT GRAIL FER ORBIT ORBIT MENT START
JONE (S) JON (E) S JO (N) ES J (O) NES (J) ONES SPINNER IND (Y) IN (D) Y I (N) DY ( I ) NDY EJECT TROUGH (BOTTOM) SPINNER START BUTTON

) DRIVE
GRN-BRN «515-7568-08
D.O.T.S. » « D.O.T.S. »
515-7568-08
J1-P1 below playfield below playfield
« D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » CABINET
515-7568-08 515-7568-08 515-7568-08 180-5010-04 515-7568-08 515-7568-08 515-7568-08 515-7568-08 180-5183-00 180-5183-00 500-6227-03 180-5010-04 180-5174-00
CABINET
below playfield below playfield below playfield above playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield above playfield In Cabinet
SW. # 17 SW. # 18 SW. # 19 SW. # 20 SW. # 21 SW. # 22 SW. # 23 SW. # 24 SW. # 25 SW. # 26 SW. # 27 SW. # 28 SW. # 29 SW. # 30 SW. # 31 SW. # 32
180-5174-00
In Cabinet

02 ARK (4-BALL) (4-BALL) (4-BALL) (VUK OPTO) (STACK OPTO) LEFT LEFT RIGHT RIGHT
Q2
AUTO TROUGH TROUGH TROUGH TROUGH TROUGH SHOOTER LEFT RETURN SLING- SLING- RETURN RIGHT LEFT TOP BOTTOM
DRIVE LOAD #4 (L) #3 #2 #1 (R) JAM LANE OUTLANE LANE SHOT SHOT LANE OUTLANE BUMPER BUMPER BUMPER
GRN-RED NOT USED « D.O.T.S. » « D.O.T.S. »
180-5119-02 180-5119-02 180-5119-02
« D.O.T.S. » TRANS. / REC. TRANS. / REC. « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. »
180-5119-02 TX 515-0173-00 TX 515-0173-00 180-5157-00 500-6227-04 500-6227-04 180-5054-00 180-5054-00 500-6227-04 500-6227-04 180-5015-04 180-5015-04 180-5015-04
J1-P3 below playfield below playfield below playfield below playfield RX 515-0174-00 RX 515-0174-00 below playfield below playfield below playfield 2 per Asm. 2 per Asm. below playfield below playfield below playfield below playfield below playfield
SW. # 33 SW. # 34 SW. # 35 SW. # 36 SW. # 37 SW. # 38 SW. # 39 SW. # 40 SW. # 41 SW. # 42 SW. # 43 SW. # 44 SW. # 45 SW. # 46 SW. # 47 SW. # 48
03 RIGHT ARK HIT L. SLING- R. SLING- R. RAMP
Q3
RIGHT NOT ORBIT ENTER ARK GERMAN GERMAN GERMAN GERMAN MAP SHOT SHOT EN-
DRIVE BUMPER USED ( M ) AP M ( A ) P MA ( P ) (TOP) (OPTO) (OPTO) 1 (BOT) 2 3 4 (TOP) EJECT (TOP) (TOP) TRANCE
GRN-ORG 180-5015-04 180-0000-00»
« D.O.T.S. » « D.O.T.S. « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. »
515-7568-06 515-7568-06 515-7568-06 500-6227-04 500-6775-01 500-6775-01 515-7568-04 515-7568-04 515-7568-04 515-7568-04 180-5186-01 180-5054-00 180-5054-00 180-5087-00
J1-P4 below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield 2 per Asm. 2 per Asm. above playfield
SW. # 49 SW. # 50 SW. # 51 SW. # 52 SW. # 53 SW. # 54 SW. # 55 SW. # 56 SW. # 57 SW. # 58 SW. # 59 SW. # 60 SW. # 61 SW. # 62 SW. # 63 SW. # 64
04 ARK ARK TEMPLE TEMPLE R. ORBIT LEFT CAPTIVE CAPTIVE SWORDS- SWORDS-
Q4SKILL MOTOR MOTOR MOTOR MOTOR (BOT- GERMAN GERMAN GERMAN ORBIT TEMPLE R. RAMP BALL BALL MAN- MAN-
DRIVE SHOT (UP) (DN) (UP) (DN) TOM) 5 (BOT) 6 7 (TOP) (TOP) STANDUP EXIT (TOP) (BOT) BACK FORWARD
GRN-YEL «180-5087-00
D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. »
180-5119-02 180-5119-02 180-5119-02 180-5119-02 500-6227-04 515-7568-04 515-7568-04 515-7568-04 500-6227-03
« D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. » « D.O.T.S. »
515-7581-07 180-5087-00 180-5179-00 180-5178-00 180-5119-02 520-5251-00
J1-P5 above playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield below playfield above playfield below playfield below playfield below playfield below playfield
« FOR MORE ABOUT DIODE ON TERMINAL STRIPS « D.O.T.S. », SEE SECTION 5, CHAPTER 2, PAGES 96 – 97. »
BLK
BLK BLU BRN GRY GRN LGN ORG PNK RED TAN VIO WHT YEL
Wire Color Abbreviations used: Black
Black Blue Brown Gray Green Light Grn. Orange Pink Red Tan Violet White Yellow

Dedicated Switches [ #D-1 – #D-32 ] {Dedicated Switch Locations : next page}

CPU/SND IC-U2 IC-U2 IC-U2 IC-U2 IC-U2 IC-U2 IC-U2 IC-U2 IC-U4 IC-U4 IC-U4 IC-U4 IC-U4 IC-U4 IC-U4 IC-U4
PNK-BRN PNK-RED PNK-ORG PNK-YEL PNK-GRN PNK-BLU PNK-VIO PNK-GRY GRY-BRN GRY-RED GRY-ORG GRY-YEL GRY-GRN GRY-BLU GRY-VIO GRY-BLK
Board J2-P2 J2-P3 J2-P4 J2-P6 J2-P7 J2-P8 J2-P9 J2-P10 J3-P1 J3-P2 J3-P4 J3-P5 J3-P6 J3-P7 J3-P8 J3-P9
SW. D-1 SW. D-2 SW. D-3 SW. D-4 SW. D-5 SW. D-6 SW. D-7 SW. D-8 SW. D-9 SW. D-10 SW. D-11 SW. D-12 SW. D-13 SW. D-14 SW. D-15 SW. D-16
GROUND LEFT CENTER RIGHT FOURTH FIFTH L. (EFT) LEFT R. (IGHT) RIGHT U.L. (EFT) U.L. (EFT) U.R. (IGHT) U.R. (IGHT)
(BLK) COIN COIN COIN COIN COIN NOT NOT NOT FLIPPER FLIPPER FLIPPER FLIPPER FLIPPER FLIPPER FLIPPER FLIPPER
J2-P1/11 SLOT SLOT SLOT SLOT SLOT USED USED USED BUTTON E.O.S. BUTTON E.O.S. BUTTON E.O.S. BUTTON E.O.S.
& J3-P10
NOT USED NOT USED NOT USED NOT USED IF USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED
180-5204-00 180-5204-00 180-5204-00 180-5204-00 180-0000-00 180-0000-00 180-5160-01 180-5160-01 180-5160-01 180-5149-00 180-5160-01 180-5149-00 180-5160-01 180-5149-00 180-5160-01 180-5149-00
Coin Door Coin Door Coin Door Coin Door a/b playfield a/b playfield Cabinet Side Cabinet Side Cabinet Side Flipper Asm. Cabinet Side Flipper Asm. Cabinet Side Flipper Asm. Cabinet Side Flipper Asm.

CPU/SND IC-41 IC-41 IC-41 IC-41 IC-41 IC-41 IC-41 IC-41

LGN-BRN LGN-RED LGN-ORG LGN-YEL LGN-BLK LGN-BLU LGN-VIO LGN-GRY CPU/SOUND BD. SW1 DIP SWITCH (located between Connectors J3/J13)
Board J13-P1 J13-P3 J13-P4 J13-P5 J13-P6 J13-P7 J13-P8 J13-P9
SW. D-17 SW. D-18 SW. D-19 SW. D-20 SW. D-21 SW. D-22 SW. D-23 SW. D-24 SW. D-25 SW. D-26 SW. D-27 SW. D-28 SW. D-29 SW. D-30 SW. D-31 SW. D-32
GROUND TILT BACK MINUS PLUS SELECT X X X X X X X X
(BLK) PENDULUM SLAM TICKET NOT DIP DIP DIP DIP DIP DIP DIP DIP
X X X X

(GREEN (< / – RED (+ / > RED (BLACK

J13-P10 (PLUMB BOB) TILT NOTCH USED BUTTON) BUTTON) BUTTON) BUTTON) (1)2345678 1(2)345678 12(3)45678 123(4)5678 1234(5)678 12345(6)78 123456(7)8 1234567(8)
NOT USED
See Sec. 4, OPTIONAL IF USED NOT USED NOT USED NOT USED NOT USED NOT USED SW. POS. SW. POS. SW. POS. SW. POS. SW. POS. SW. POS. SW. POS. SW. POS.
Chp. 1, Pg. 45 502-5032-00 180-5119-02 180-0000-00 180-5192-04 180-5192-02 180-5192-02 180-5192-00 #1 ON #2 ON #3 ON #4 ON #5 ON #6 ON #7 ON #8 ON
for cab. parts Optional Kit Below P/F a/b playfield Coin Door Coin Door Coin Door Coin Door
[ ][ ][ ]
LAMP MATRIX GRID [ #1 – #80 ] {Lamp Locations : next page}
I/O 01 02 03 04 05 06 07 08
Power IC-U17 IC-U16 IC-U15 IC-U14 IC-U13 IC-U12 IC-U11 IC-U10
Driver 18VDC
YEL-BRN
18VDC
YEL-RED
18VDC
YEL-ORG
18VDC
YEL-BLK
18VDC
YEL-GRN
18VDC
YEL-BLU
18VDC
YEL-VIO
18VDC
YEL-GRY
Board J13-P9 J13-P8 J13-P7 J13-P6 J13-P5 J13-P4 J13-P3 J13-P1
01 #555 Clear LP. # 1 #555 Clear LP. # 2 #555 Clear LP. # 3 #555 Clear LP. # 4 #555 Clear LP. # 5 #555 Clear LP. # 6 #44 Clear LP. # 7 #44 Clear LP. # 8
Q33
START TOURNAMENT NOT NOT NOT NOT LAST CRUSADE
GROUND BUTTON START BUTTON USED USED USED USED CRUSADE ARROW
RED-BRN
J12-P1 « D.O.T.S. » 165-5002-00 OPTIONAL 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5000-44-HF « D.O.T.S. » 165-5000-44-HF
02 #555 Clear LP. # 9 #555 Clear LP. # 10 #555 Clear LP. # 11 #555 Clear LP. # 12 #555 Clear LP. # 13 #555 Clear LP. # 14 #555 Clear LP. # 15 #555 Clear LP. # 16
Q34
RAIDERS RAIDERS RAIDERS LITE RIGHT RAIDERS SHOOT RAIDERS
GROUND #5 (TOP) #4 #3 MYSTERY SPECIAL #2 AGAIN #1 (BOT)
RED-BLK
J12-P2 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
03 #555 Clear LP. # 17 #555 Clear LP. # 18 #555 Clear LP. # 19 #555 Clear LP. # 20 #555 Clear LP. # 21 #555 Clear LP. # 22 #555 Clear LP. # 23 #555 Clear LP. # 24
Q35
NOT NOT SKILL: INDY SKILL: CAIRO SKILL: SKILL: SUPER
GROUND USED USED IN ( D ) Y I ( N ) DY J0NES SWORDSMAN MYSTERY POPS
RED-ORG
J12-P3 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
04 #555 Clear LP. # 25 #555 Clear LP. # 26 #555 Clear LP. # 27 #555 Clear LP. # 28 #555 Clear LP. # 29 #555 Clear LP. # 30 #555 Clear LP. # 31 #555 Clear LP. # 32
Q36
SKILL: ADVANCE RIGHT
GROUND SCENE ORBIT ARROW ( I ) NDY ( J ) ONES J ( O ) NES JO ( N ) ES JON ( E ) S JONE ( S )
RED-YEL
J12-P4 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
05 #555 Clear LP. # 33 #555 Clear LP. # 34 #555 Clear LP. # 35 #555 Clear LP. # 36 #555 Clear LP. # 37 #555 Clear LP. # 38 #555 Clear LP. # 39 #555 Clear LP. # 40
Q37
EXTRA RIGHT RAMP TEMPLE TEMPLE TEMPLE TEMPLE TEMPLE NOT
GROUND BALL ARROW #5 (TOP) #4 #3 #2 #1 (BOT) USED
RED-GRN
J12-P5 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
06 #555 Clear LP. # 41 #555 Clear LP. # 42 #555 Clear LP. # 43 #555 Clear LP. # 44 #555 Clear LP. # 45 #555 Clear LP. # 46 #555 Clear LP. # 47 #555 Clear LP. # 48
Q38
NOT 2X MARKS CAIRO
GROUND ( M ) AP M(A)P MA ( P ) USED KINGDOM THE SPOT 8-BALL SWORDSMAN
RED-BLU
J12-P6 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
07 #555 Clear LP. # 49 #555 Clear LP. # 50 #555 Clear LP. # 51 #555 Clear LP. # 52 #555 Clear LP. # 53 #555 Clear LP. # 54 #555 Clear LP. # 55 #555 Clear LP. # 56
Q39
CRUSADE CRUSADE CRUSADE CRUSADE CRUSADE RIGHT LEFT LEFT ORBIT
GROUND #5 (TOP) #4 #3 #2 #1 (BOT) SPINNER SPINNER ARROW
RED-VIO
J12-P8 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
08 #555 Clear LP. # 57 #555 Clear LP. # 58 #555 Clear LP. # 59 LED WB WHT LP. # 60 LED WB WHT LP. # 61 LED WB WHT LP. # 62 LED WB WHT LP. # 63 #555 Clear LP. # 64
Q40
NOT NOT NOT LEFT TOP BOTTOM RIGHT TEMPLE
GROUND USED USED USED BUMPER BUMPER BUMPER BUMPER ARROW
RED-GRY
J12-P9 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 112-5024-08 « D.O.T.S. » 112-5024-08 « D.O.T.S. » 112-5024-08 « D.O.T.S. » 112-5024-08 « D.O.T.S. » 165-5002-00
09 #44 Clear LP. # 65 #555 Clear LP. # 66 #555 Clear LP. # 67 #555 Clear LP. # 68 #555 Clear LP. # 69 #555 Clear LP. # 70 #555 Clear LP. # 71 #555 Clear LP. # 72
Q41
TEMPLE KINGDOM KINGDOM KINGDOM KINGDOM LEFT RAIDERS KINGDOM
GROUND OF DOOM #5 (TOP) #4 #3 #2 SPECIAL ARROW #1 (BOT)
RED-WHT
J12-P10 « D.O.T.S. » 165-5000-44-HF « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
10 #44 Amber LP. # 73 #555 Clear LP. # 74 #555 Clear LP. # 75 #555 Clear LP. # 76 #555 Clear LP. # 77 #555 Clear LP. # 78 #555 Clear LP. # 79 #555 Clear LP. # 80
Q42
NOT NOT NOT NOT
GROUND MYSTERY USED USED USED IND ( Y ) USED RAIDERS GRAIL
RED
J12-P11 « D.O.T.S. » 165-5053-03-HF « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00 « D.O.T.S. » 165-5002-00
FOR MORE ABOUT DIODE ON TER BLK BLU BRN GRY GRN ORG RED VIO WHT YEL
Black Blue Brown Gray Green Orange Red Violet White Yellow
q U.S. q
Customary
Inch Ruler

Indiana Jones™ ©2008 Lucasfilm Ltd. & TM.

Stern Pinball, Inc. All Rights Reserved.
1
2
3

Technical Support & Parts Sales

x
2002, 2003 (2-Disc Set) 2004 (2-Disc Set) & 2005 (2-Disc Set) & 2006 (3-Disc Set) CD-ROMs are
now available! Click year for more info!
x
We at STERN Pinball continuously strive to provide our distributors, operators, and game owners with
the best technical support possible. We, therefore, have provided you with the service options listed
4

below. If your game requires parts and/or service, please contact your nearest STERN Pinball distributor
(See our Distribution List). For any additional assistance, contact our technical service staff at 800-KICKERS
(800-542-5377) or by e-mail ( [email protected] ).
x Metric Conversion
If your STERN Pinball is in need of repair, please contact your nearest STERN Distributor. 1/16”
x
Pinball Game Parts Game Code Library 1/8”
• 2006+ Complete Pinball Service Game Manuals • Offering S.A.M. System Game Code 1/4”
5

in PDF Format available (includes parts and • Offering archived White Star Game Code 1/2”

.0625”

.125”

.25”
schematics). for all Data East®, Sega™ and STERN® 3/4”
• 2004 — 2005 Select Pinball Service Game Pinballs (EPROM Programmer required)

.75”
.5”
1/32”
Manual Excerpts only : Parts Identification & (.03125”)
Location (The Pink Pages), Drawings for Major Coinage Cards
Assemblies & Ramps (The Blue Pages) • Offering a range of Coinage Cards for 1” = 2.54 cm or 25.4 mm
• Appendixes A — J (updated with each game) download 1 cm = .3937”
1 mm = .03937”
• Country Setting, Pricing Scheme, Dip
6

Schematics, Theory of Operation Switch Setting (opens a pop-up window) For metric, multiply the inch
and Troubleshooting Tips • Custom Pricing Demonstration value by the metric value:
• Current S.A.M. System Games complete (for S.A.M. System) e.g.:
5” X 2.54 cm =
Schematic Section 12.7 cm or 127 mm
• Archived Drawings for the White Star Board Tricks & Tips
System™ • Pinball Machine Foam Cushion Packing For US, multiply the metric
value by the inch value:
• 1st Time Pinball Set-Up & Preventative e.g.:
Service Bulletins Maintenance 13 cm X .3937” =
5.1181”
7

• Detailing Technical Information, Tips, FYIs, • Pinball Location Maintenance

Notices and Updates • How to Update Your Game Code (S.A.M. System)

NTE Semi-Conductor Cross Reference Track Your Order Via UPS Non-USA select your location
Radio Shack Component Catalogue

Visit our website www.sternpinball.com for Pinball & Redemption game information!
8

Click to view, print or download all of the above!

HELP US, HELP YOU! If you have any suggestions, questions, need technical advice,
find errors or have comments, contact us through our website or call!
This Game Service Manual and all other documents relating to this product, playfield components, features, rules, programming
9

and operation are subject to change without notice (Service Bulletins, if applicable, available through our website).

780-50A4-00
Games shipped factory direct
to Europe from Stern Pinball,
Inc. are CE approved and will
have an "E" prefix attached to
t h e S e r i a l N u m b e r.
Ä Ã Á Ä Â Æ Æ