NV9 USB

MANUAL SET

INTRODUCTION
NV9 USB Manual Set - Introduction 1

MANUAL AMENDMENTS

Document Base Details

Spec. Used Issue Receipt Comments

Date Date
GA550-1 29/02/11 17/05/11
GA138 01/11/10 22/01/11
GA959 29/03/11 29/07/11

Amendment Details

Rev. Date Amendment Details Issued by

-- 13/04/12 Revised First Issue EAM

Copyright © Innovative Technology Ltd 2013 GA00550-2

NV9 USB Manual Set - Introduction 2

NV9 USB MANUAL SET - INTRODUCTION

COPYRIGHT 3
LIMITED WARRANTY 3
PRODUCT SAFETY INFORMATION 3
INTRODUCTION 4
FEATURES 5
TYPICAL APPLICATIONS 5
STRUCTURE OF THIS MANUAL SET 6
WHICH SECTION IS RELEVANT TO ME? 6

MAIN HEADQUARTERS Innovative Technology Ltd

Derker Street – Oldham – England - OL1 4EQ
Tel: +44 161 626 9999 Fax: +44 161 620 2090
E-mail: [email protected]
Web site: www.innovative-technology.co.uk

BRAZIL
[email protected]

CHINA
[email protected]

GERMANY
[email protected]

SPAIN
[email protected]

UNITED KINGDOM
[email protected]

UNITED STATES OF AMERICA

[email protected]

REST OF THE WORLD

[email protected]

Copyright © Innovative Technology Ltd 2013 GA00550-2

NV9 USB Manual Set - Introduction 3

COPYRIGHT

This manual set is Copyright © Innovative Technology Ltd., 2012. No part of this
publication may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from
Innovative Technology Ltd. The contents of this manual set may be subject to change
without prior notice.

LIMITED WARRANTY

Innovative Technology Ltd warrants each of its hardware products to be free from
defects in workmanship and materials under normal use and service for a period
commencing on the date of purchase from Innovative Technology Ltd or its
Authorized Reseller, and extending for the length of time stipulated by Innovative
Technology Ltd.

A list of Innovative Technology Ltd offices can be found in every section of this
manual set. If the product proves defective within the applicable warranty period,
Innovative Technology Ltd will repair or replace the product. Innovative Technology
Ltd shall have the sole discretion whether to repair or replace, and any replacement
product supplied may be new or reconditioned.

The foregoing warranties and remedies are exclusive and are in lieu of all other
warranties, expressed or implied, either in fact or by operation of law, statutory or
otherwise, including warranties of merchantability and fitness for a particular purpose.

Innovative Technology Ltd shall not be liable under this warranty if it’s testing and
examination disclose that the alleged defect in the product does not exist or was
caused by the customer's or any third person's misuse, neglect, improper installation
or testing, unauthorized attempts to repair, or any other cause beyond the range of
the intended use. In no event will Innovative Technology Ltd be liable for any
damages, including loss of profits, cost of cover or other incidental, consequential or
indirect damages arising out the installation, maintenance, use, performance, failure
or interruption of a Innovative Technology Ltd product, however caused.

PRODUCT SAFETY INFORMATION

Throughout this manual set, we may draw your attention to key safety points that you
should be aware of when using or maintaining the product.

These safety points will be highlighted in

a box, like this: Caution!
Mains voltage is present on
these terminals

This manual set and the information it contains is only applicable to the model stated
on the front cover, and must not be used with any other make or model.

Copyright © Innovative Technology Ltd 2013 GA00550-2

NV9 USB Manual Set - Introduction 4

INTRODUCTION

The NV9 USB validator is made up of three basic components: an NV9 USB validator
head, removable bezel and a cashbox (as shown below):

Removable
bezel
NV9 USB
validator
head

Cashbox

The NV9 USB validator is a device that can accept, validate and store 300 or 600 bank
notes of mixed denominations.

NV9 USB NV9 USB NV9 USB

Rear View Side View Front View

The NV9 USB Validator leaves the factory preset to at least one currency and one
firmware interface so that it is ready for immediate installation. The NV9 USB validator
works with any NV9 USB currency dataset created by Innovative Technology Ltd -
datasets can be downloaded from the Support section of the ITL website.

Copyright © Innovative Technology Ltd 2013 GA00550-2

NV9 USB Manual Set - Introduction 5

FEATURES

The NV9 USB validator has many innovative features, including:

 300 or 600 note capacity cashboxes available

 Accepts up to 15 different note denominations (in serial control mode)
 Accepts, validates and stores multiple denominations of bank notes in less than
3 seconds
 Secure encrypted protocol available for communication

TYPICAL APPLICATIONS

The NV9 USB validator can be used in a variety of situations where high security and
high volume bank note acceptance and validation are needed. Some typical
applications are:

 AWP and SWP applications

 Self-Serve and Retail
 Kiosks
 Casinos
 Parking and Ticketing
 Vending

Copyright © Innovative Technology Ltd 2013 GA00550-2

NV9 USB Manual Set - Introduction 6

STRUCTURE OF THIS MANUAL SET

This manual set is made up of seven sections, each is supplied in a separate Portable
Document Format (PDF) file, so you only need to download or print the section
relevant to your requirements:

 Introduction
 Section 1 – Quick Start and Configuration Guide
 Section 2 – Field Service Manual
 Section 3 – ITL Software Support Guide
 Section 4 – Mechanical and Electrical Manual
 Section 5 – Software Implementation Guide
 Section 6 – Technical Appendices

WHICH SECTION IS RELEVANT TO ME?

 Quick Start and Configuration Guide:

– Most users should use this section; typical users are software engineers
looking at how to make it work, project engineers evaluating their first
unit, or installation engineers installing the unit into a host machine.

– This section contains the essential information that a user needs to

quickly assemble and configure the NV9 USB validator ready for
installation into the host machine.

 Field Service Manual:

– Typically used by a field service engineer who is maintaining the

product.

– This section contains the essential information that the field service
engineer needs to clean, maintain and fault find an NV9 USB validator
that is installed in a host machine.

 ITL Software Support Guide:

– Any user who wants to test the functionality of the unit, reprogram the
firmware or dataset, or set up the encryption key, address or routing for
the unit.

– This section contains the information needed for a user to configure and
program the NV9 USB validator, using a range of software tools.

Copyright © Innovative Technology Ltd 2013 GA00550-2

NV9 USB Manual Set - Introduction 7

 Mechanical and Electrical Manual:

– Design engineers who are designing a host machine cabinet, or looking

to integrate the NV9 USB validator into an existing cabinet.

– This section contains the all the mechanical and electrical information a
designer needs to effectively integrate the NV9 USB validator into a host
machine.

 Software Implementation Guide:

– Software engineers looking at how to implement the NV9 USB validator

in their host machine, or design engineers looking at including the unit
in their host machine.

– The information in this section details the communications protocols,

specific commands and interfaces used including eSSP and ccTalk.

 Technical Appendices:

– These appendices have no specific audience, but users can find relevant
and useful information here.

– This section includes information on product approvals, technical

specifications and ordering information.

Copyright © Innovative Technology Ltd 2013 GA00550-2