Scribd
Upload
57 views1 page

N-6010-2.5mm-94140177 (F23)

The document provides an inspection test certificate for an N-6010 welding electrode with dimensions of 2.5 x 350mm from lot 94140177. It specifies the applicable AWS standard and provides test results for chemical composition, tensile strength, yield strength, elongation and impact value which meet the specifications listed.

Uploaded by

hanz bermejo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views1 page

N-6010-2.5mm-94140177 (F23)

The document provides an inspection test certificate for an N-6010 welding electrode with dimensions of 2.5 x 350mm from lot 94140177. It specifies the applicable AWS standard and provides test results for chemical composition, tensile strength, yield strength, elongation and impact value which meet the specifications listed.

Uploaded by

hanz bermejo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CUSTOMER:

P.O.NO.:
INSPECTION TEST CERTIFICATE

NIH
D
NWELD
F23

Product Name Dimension (mm) Lot No. Applicable Specification and Certificate No. Date oflssue
Classification
N-6010 2.5 X 350 94140177 AWS A5.l: E6010 23-10125 October 4, 2023
CHEMICAL COMPOSITION(%) ACCORDING TO EN10204 TYPE 3.1
Elements C Si Mn p s Ni Cr Mo V
Specifications
All Weld Metal 0.13 0.18 0.43 0.017 0.013 0.01 0.03 0.0003 0.01
Elements
Specifications
All Weld Metal
ACCORDING TO EN10204 TYPE 2.2 remarks/notes:

Tensile Test of Deposited Metal Impact Test of Deposited Meta


Yield Strength Tensile Strength !Elongation Test Impact Value
at 0.2% offset N/mm2 % Temp. J
N/mm2 oc
Specifications
All Weld Metal 482 546 25 -30 89
We hereby certify that this report is correct and that all test results are in

tlwt
compliance with the specification described herein.
Test results for mechanical properties, deposit or electrode composition and other properties
were obtained from a weld produced and tested according lo prescribed standards, ana INDUSTRIAL WELDING CORPORATION
should not be assumed to be the expected results in a particular application or weldment.
Actual results will vary depending on many factors, including, but not limited to, wel 11

procedure, plate chemistry and temperature, weldment design and fabrication methods.
Users are cautioned to confirm by qualification testing, or other appropriate means, the H.B. Pelant� -
'iuitability of any welding consumable and procedure before use in the intended application.
f'P: Technical Departmenf
0250 rev. 03.25.15 R2

You might also like