Scribd
Upload
54 views1 page

Gypsum Board Strength

Uploaded by

pqpqpqpqpqpq2002
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views1 page

Gypsum Board Strength

Uploaded by

pqpqpqpqpqpq2002
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL DATASHEET

Gypsum plasterboard (GKB) 20 06


MSZ EN 520

Product: Gypsum plasterboard (GKB) - Type A


MASTERPLAST Kft., 8143 Sárszentmihály, Árpád u. 1/a
Supplier:
(www.masterplastgroup.com)
Size, packaging: Boards on pallet, edgeform: AK, HRAK

Intented to be used in conjunction with gypsum plasterboards, in assembled


Application: non-loadbearing structures (e.g. wall- and ceiling linings, cladding of beams,
columns), exposed to varying relative humidity up to 70 %.

Composed of a plaster core encased in, and firmly bonded to paper liners to
Material:
form flat rectangular boards

Properties Relevant standards Technical data

Reaction to fire EN 13501-1 A2-s1, d0


Length of boards Manufacturer's declared value (MDV) 2000-3000mm (+0 / -5)mm
Width of boards MDV 1250mm (+0 / -5)mm
Thickness of boards MDV 9,5mm / 12,5 mm (±0,5)mm
Densiity of raw-material MDV >800 kg/m3
Mass per unit area MDV 7,5 / 9,5 kg/m2
Moisture content (in air-dry condition) MDV <1 %(v/v)
Content of crystalwater MDV ≥ 20 %
Moisture absorption (20 ˚C)
Partial vapour pressure MDV 40% 60% 80%
Moisture absorption (mass%) MDV 0,3-0,6 0,6-1,0 1,0-2,0
Coefficient:
Water vapour resistance factor MDV
0,009 - 0,023 kg/m·h·Pa
Elongation due to moisture (20°C)
MDV 0,35 mm/m
(by 65-95 % partial vapour pressure)
Modulus of elasticity (E); (Paralell to fiber orientation /
DIN 18180 ≥ 2000 N/mm2 / ≥ 2500 N/mm2
Perpendicular to fiber orientation)
Bending strength (Paralell to fiber orientation /
DIN 18180 > 2,2 N/mm2 / > 7,2 N/mm2
Perpendicular to fiber orientation)
Compression strength MDV 5-10 N/mm2
Shear strength MDV 2,5-4,5 N/mm2
Surface hardness (Brinell) MDV 15 N/mm2

Storage and handling


Under dry conditions, protected against atmospheric exposure, especially sun-radiation, as well as against moisture and rain.

Guarantee, warranty
In accordance with the current legislations and the conditions of the distributor. The observation of the application rules of the product and presentation of
the invoice constitute a prerequisite for possible future warranty claims.
Standards, specifications
DIN 18180, MSZ EN 520

Health and safety

No labelling required in accordance with the relevant regulation (EC) No. 1907/2006 of the European Parliament and of the Council (REACH).

This datasheet corresponds the current knowledge on the subject, but may be revised as new knowledge and/or experience becomes available. The
product possesses the given technical characteristics. Since all variations of end-using of the product can not be anticipated, the designer/end-user's
responsibility to make sure of the suitability of this product for particular purposes, structures.

*This technical datasheet is applied to products sold by Masterplast Kft. and valid until withdrawal or until modification. Since this datasheet may
be subject to revision, it is the responsibility of designer/end-user to make sure of possessing the latest version of the datasheet (*see date of issuing).
Most recent version of this datasheet can be also accessed under www.masterplastgroup.com.

TD_Plasterboard(GKB)-20120201_HU *Issued: 2012 02. 01.

You might also like