PRODUCT OVERVIEW

T-CLASS WATER-COOLED CHILLERS

GLOBAL #1 IN OIL-FREE CHILLERS

T-Class Water-Cooled Chillers
Smardt’s T-Class of chillers utilize Smardt’s oil-free chiller technology with Turbocor’s TTS compressors using
R134a refrigerant. T-Class Water-Cooled Chillers are available from 45 to 1600 TR (160 to 5625 kW) and
can be supplied in multiple configurations, which Smardt can customize per the requirements of
your application.

T-Class Chillers Proprietary magnetic bearings replace

Smardt has brought its extensive conventional oil-lubricated bearings.
experience in oil-free chiller This eliminates the high friction losses,
development, sales and service into mechanical wear, and the higher-
designing the T-Class — a range of maintenance oil management systems
water-cooled chillers that deliver the that are inherent with conventional
highest level of reliability, outstanding compressor designs.
efficiency and the lowest total cost of
Turbocor’s primary moving part (the
ownership.
rotor shaft and impellers) is levitated
T-Class chillers offer valuable benefits to during rotation by a digitally controlled
owners and operators, such as ease of magnetic bearing system. Position
installation, simple streamlined operation sensors at each magnetic bearing
and maintenance, and lower lifetime provide real-time feedback to the
operating and maintenance costs. These bearing control system, 120 times each
advantages are the hallmark of Smardt revolution, ensuring constantly centered
A Smardt T-Class water-cooled chiller
chillers. rotation.
equipped with two Turbocor TTS
compressors Your requirements for capacity, The result is oil-free operation that
configuration, and turndown delivers significant chiller energy savings
performance will help your Smardt compared with standard chillers, and
representative assist with determining the provides an extended service life without
best product fit for your project. the efficiency decrease seen in oil-based
systems.
Oil-Free Operation
Smardt oil-free centrifugal chillers use Global Number One
magnetic bearings and a variable- Smardt is the industry leader in oil-free
speed drive to deliver IPLV efficiencies centrifugal chillers. Smardt pioneered oil-
that far surpass those of conventional free centrifugal compressor technology
oil-lubricated centrifugal, reciprocating, to provide plant owners and operators
scroll and screw chillers. a line of chillers that broke through
industry norms of lifetime performance,
Smardt utilizes totally oil-free Turbocor
energy conservation (reducing operating
compressor technology, achieving
expenses), streamlined maintenance, and
the highest part-load efficiencies for
ease of operation.
our chillers and chilled water systems
(including water-, air- and evaporatively- Since our first oil-free centrifugal chiller in
cooled applications). 2002, more than 10,000 Smardt chillers,
ranging from 60 TR up to 3200 TR, are
now saving money, energy and CO2
emissions across the globe.

T-Class water-cooled chillers Product Overview 2

T-Class Water-Cooled Chillers

T-Class water-cooled chillers Product Overview 3

T-Class Water-Cooled Chillers

Side and front views of a Smardt T-Class water-cooled chiller customized in a stacked
(narrow) configuration to fit a smaller footprint within a plant room

Turbocor TTS Compressor Multiple Configurations Smardt Restart ensures that in the
T-Class chillers can be equipped Smardt can configure your T-Class chiller event of a power failure, your Smardt
with up to eight Turbocor TTS oil-free to fit any footprint or height restriction, chiller is back on line as quickly as
compressors. VFDs are built-in, and with multiple barrel configurations 20 seconds. Chilled water supply for
drives are internal to the machine. available (see illustration on page 5). critical applications is not impacted by
These oil-free compressors have low- intermittent power loss, eliminating the
sound output and use R134a or R513A Chiller Options need for additional thermal storage. The
refrigerants.* For R513A chiller solutions, Options for Smardt’s T-Class chillers start-up mode includes additional motor
please see Smardt’s G-Class chillers. include our integrated pump packages, and surge protection.
economizer, Smardt Lift, and Smardt
Extended Service Life Restart. Applications
The T-Class chiller is designed for a Energy conscious plant owners and
Smardt Lift enables chiller operation at
service life of 25 years. operators want optimized performance
full load with enhanced efficiencies when
with savings over the life of the chiller.
supplying chilled water at temperatures
Smardt’s T-Class chillers support
that are close to the ambient temperature.
critical-load applications in a variety
This is extremely beneficial in both high
of markets, including commercial, data
temperature chilled water applications or
center, pharmaceutical, hospital, higher
in seasonal operation when the ambient
TTS Compressor education, district cooling, hotels, malls,
temperature is similar to the design
and manufacturing.
chilled water conditions.

*The Danfoss Turbocor TTS compressor can use R134a or R513A

refrigerants. A Smardt T-Class chiller using R513A effectively
becomes a G-class chiller.

T-Class water-cooled chillers Product Overview 4

T-Class Water-Cooled Chillers

Smardt T-Class Water-Cooled Chillers offer barrel configuration flexibility for applications
with restricted footprints or access challenges

Highlights
•Class leading part-load efficiencies,
achieving optimum IPLV in total capacity
range.

•Typically smaller footprint than chillers of

comparable capacity.
•Responsive chilled water control under
all conditions.
•Inbuilt redundancy with multiple
compressors.
•Designed for ease of maintenance and
serviceability, featuring field-serviceable
compressors.

•Smardt quality, acceptance tested and

pre-commissioned prior to delivery
ensuring trouble-free commissioning and
start-up on every project.

T-Class water-cooled chillers Product Overview 5

T-Class Water-Cooled Chillers
Smardt’s T-Class Water-Cooled Chillers with full-load capacities of units with R134a refrigerant, range from
45 to 1600 TR (160 to 5625 kW)

Representative Smardt can customize your T-Class chiller to meet your project’s needs and
Models specifications. The models included in this capacity chart are considered
representative of the T-Class, but selection is not limited to to these specific models.
Your Smardt representative can provide capacity data for your project.

WB031.1B

WB044.2H

WE125.3E

WB280.4K

WE320.5K

WB400.6K

WE500.7K

WE600.8K

TR 171 341 512 682 853 1024 1194 1365 1535 1706
kW 0 600 1200 1800 2400 3000 3600 4200 4800 5400 6000

Cooling Capacity TR (kW)

Note: Available cooling capacity will vary
with operating conditions and chiller
Economized
configuration. Capacities shown are based
Selectable Full-Load Range on standard AHRI conditions.
Unloading Capacity

T-Class water-cooled chillers Product Overview 6

T-Class Water-Cooled Chillers

Water-cooled Chiller Nomenclature

Model Number Nomenclature

W B 031 . 1 B G04 . F 4 AH C A . F 4 AG C A.0 C 0

Chiller Type Circuiting
(Water Cooled) D, S, M, P

Design Series Unit Layout

C,F,L,N,S
Nominal Cooling Capacity
in kW of Refrigeration ÷10 Performance Option
(031  310 kWR) E=Brazed Plate
T=Flash Tank
Number of Compressors
Compressor Type (* denotes future use)
A = TGS310, B = TTS300, D = TTS300 MT, Cond. Tube Code
E = TTS350, F = TGS230, G = TGS490, A=Ø 3/4", B= Ø 1"
H = TTS400, J = TGS390, K = TTS700,
L = TTS500*, M = TGS520, N = TTH375, Tube Length
O = TTH375 MT, P = TGH285*, Q = TGH285 MT, Code
S = VTT1000, U = VTT1200, V = VTG1200*, Tube Count
X = VTX1600, Y = VTG1400 Code

Compressor Voltage Number of

D = 380 V 60HZ; F: 575V 60HZ Condenser
. Passes
G = 46 0V 60HZ; J: 400V 60HZ
Condenser Type
Evaporator Type F: Flooded; D: DX coil
P: Plate, A: Air-cooled
F: Flooded; D: DX condenser coil
P: Plate; A: Air

Number of Evaporator Passes Evap. Tube Code

A=Ø 3/4", B= Ø 1"

Tube Count Code

Evaporator Tube
Length Code

T-Class water-cooled chillers Product Overview 7

Global reach, single focus
Smardt is both the pioneer and world-leader in oil-free centrifugal chillers, with production facilities
in Canada (Montreal area), Australia (Melbourne area), United States (Plattsburgh, New York),
Germany (Stuttgart area), and China (Guangzhou and Nanjing).
Smardt service networks extend across the globe to monitor and support the world’s largest installed
base of oil-free high-efficiency chillers, with more than 10000 chillers installed globally.

AMERICAS ASIA PACIFIC EMEA

Canada Australia Guangzhou Smardt Chillers Singapore Germany
Manufacturing Co. Ltd, Nanjing
Smardt Chiller Group Inc. Smardt Chiller Pty Ltd Smardt Chillers Pte Ltd Smardt-OPK Chillers AG
Branch No. 2,
1800 Trans-Canada Highway 144 Colchester Road 438A Alexandra Road #08-11 Bahnhofstraße 74
Hengxiang Road, Qixia Economic and
Dorval, Quebec H9P1H7 Bayswater North VIC 3153 Alexandra Technopark 119967 D73240 Wendlingen
Technological Development Zone,
T +1 514 426 8989 T +61 3 9761 7905 T +65 6273 1120 T +49 7024 79429 0
Nanjing, China
E [email protected] E [email protected] E [email protected] E [email protected]
T +86 25 8532 6977
www.opk.de
USA China E [email protected]

Smardt Chillers Inc. Guangzhou Smardt Chillers

TICA Smardt Hong Kong Ltd United Kingdom
11/F, The Bedford, 91-93 Bedford Road
22 Colorado Street, Bldg 2815 Manufacturing Co. Ltd Smardt Chiller UK
Tai Kok Tsui, Kowloon, Hong Kong
Plattsburgh, NY 12903 Mei Xing Industrial Park 10A Burrell Way, Thetford,
T +852 2772 8448
T +1 518 324 5741 No. 30 Dong Zhong Road ETDD Norfolk IP24 3RW
E [email protected]
E [email protected] Guangzhou T +44 1842 824830
T +86 20 8205 7161 E [email protected]
Brazil E [email protected]
Mecalor Solutions (licensed partner)
Rua da Banduira, 219-Novo Mundo Park
São Paulo, Brazil
T +55 11 2188 1700
E [email protected]

Follow us. www.smardt.com

Smardt has exercised its best efforts to ensure that the information contained in this document is correct at time of printing. However, no warranty, reliability or accuracy is given with respect to the information contained herein, and Smardt is not and shall not be
responsible for any error or omission, or liable for the correctness or suitability of the information given. All brand names and product names used in this manual are trademarks, registered trademarks, or trade names of their respective holders.
© 2022, Smardt Chiller Group Inc. All rights reserved. 06/2022

T-Class water-cooled chillers Product Overview 8