Windows

Generic Plus UFR II/LIPSLX/LIPS4/PCL6/PS3 Printer Driver

Installation Guide

USRMA-3633-10 2024-02 en Copyright CANON INC. 2024

Contents

Introduction ....................................................................................................................................................... 2
How to Use the Manual ............................................................................................................................................. 3
Notations Used in the Manual ................................................................................................................................ 4
Disclaimers ............................................................................................................................................................... 5
Copyright .................................................................................................................................................................. 6
Trademarks .............................................................................................................................................................. 7

About This Driver ........................................................................................................................................... 9

Before Use ......................................................................................................................................................... 11

Installing the Driver .................................................................................................................................. 13

Pre-installation Check ............................................................................................................................................. 14
System Requirements ......................................................................................................................................... 15
Notes and Warnings Regarding Installation ........................................................................................................... 17
About the Readme File ........................................................................................................................................ 18
Installation Using the Installer ................................................................................................................................ 19
Installer Types .................................................................................................................................................... 20
Installing by Discovering Devices on a Network ...................................................................................................... 22
Installing by Specifying a Port or IP Address ........................................................................................................... 27
Installing Using a USB Connection ........................................................................................................................ 35
Installing a Driver Using Master Setup ................................................................................................................... 39
Installation Without Using the Installer ................................................................................................................... 41
Installing by Specifying an inf File ......................................................................................................................... 42
Installing Using a WSD Port .................................................................................................................................. 44
Updating/Uninstalling the Driver ............................................................................................................................. 46
Updating the Driver ............................................................................................................................................ 47
Uninstalling the Driver ........................................................................................................................................ 49

Changing Settings to Match the Usage Environment .................................................. 52

Using a Shared Printer ............................................................................................................................................ 53
Installing as a Print Server ................................................................................................................................... 54
Setting up Clients of a Shared Printer .................................................................................................................... 56
Changing the Port ................................................................................................................................................... 58
Installing the PPD File (PS3) ..................................................................................................................................... 62

Printing ................................................................................................................................................................ 64
Printing from a Computer ....................................................................................................................................... 65
How to Refer to the Help ......................................................................................................................................... 67

I
Creating a Shortcut to the Online Manual ............................................................................. 69
Installing a Shortcut to the Online Manual ............................................................................................................... 70
Uninstalling the Shortcut to the Online Manual ....................................................................................................... 71

Troubleshooting ........................................................................................................................................... 73
Cannot discover a device connected via a WSD port .................................................................................................. 74

II
 Introduction

Introduction
Introduction .......................................................................................................................................................... 2
How to Use the Manual ......................................................................................................................................... 3
Notations Used in the Manual .......................................................................................................................... 4
Disclaimers ............................................................................................................................................................. 5
Copyright ............................................................................................................................................................... 6
Trademarks ............................................................................................................................................................ 7

1
 Introduction

Introduction

How to Use the Manual(P. 3)

Disclaimers(P. 5)
Copyright(P. 6)
Trademarks(P. 7)

2
 Introduction

How to Use the Manual

This explains things that you need to know in order to use this manual.
Notations Used in the Manual(P. 4)

3
 Introduction

Notations Used in the Manual

This explains symbols and settings used in this manual.

Symbols Used in This Manual

In this manual, explanations of items and operations that must be followed while using the driver are set forth
the symbols that indicate the following.

IMPORTANT

● Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the
product correctly, and avoid damage to the product.

NOTE

● Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these
notes is highly recommended.

About Settings
In this manual, setting names displayed on the computer screen are represented as shown in the following
examples.

Example:
[Print]
[OK]

4
 Introduction

Disclaimers

The information in this document is subject to change without notice.

CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR
IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT.
CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.

5
 Introduction

Copyright

Copyright CANON INC. 2024

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon Inc.

6
 Introduction

Trademarks

All brand names and product names appearing on this document are registered trademarks or trademarks of
their respective owners.

All other trademarks are the property of their respective owners.

7
 About This Driver

About This Driver

About This Driver ............................................................................................................................................... 9

8
 About This Driver

About This Driver

This is a generic printer driver that supports various devices. You can use the same driver for all printer models
by changing the settings for the printing port and device information.

Features
● Information regarding the functions and options of the device are collectively defined in a "configuration
profile." By switching "configuration profiles," you can switch the driver settings screen to match the
functions of the device.
● You do not need to reinstall the driver when you add or replace a device.

Utilizing Configuration Profiles

Configuration profiles corresponding to each printer model have been prepared beforehand. You can
customize and use a configuration profile corresponding to your printer operation management.

By applying a configuration profile to the driver, the settings in the [Device Settings] sheet can be changed and
the functions specific to the device can be set. You can also export and save the function and option settings for
the device in the [Device Settings] sheet as a configuration profile.

Examples of How to Utilize Configuration Profiles

● Making a driver settings screen for the printer model you are using
When you can acquire the printer model information from the device, a configuration profile is applied
automatically and the settings screen changes to match the device. When you cannot acquire the information,
apply a configuration profile manually.
● Efficiently configuring driver settings for multiple computers
You can export and save the device function and options settings of the [Device Settings] sheet as a
configuration profile. The device information of drivers used in other computers can be easily batch set by
importing the exported configuration profile.
If you cannot acquire the device information, you can apply it by importing a configuration profile exported in
an environment where the information could be acquired.

NOTE

● For details about how to set device information and how to import and export configuration profiles, refer to
the help.

9
 Before Use

Before Use
Before Use ............................................................................................................................................................ 11

10
 Before Use

Before Use

● The newest driver software is posted on the Canon web site. Please verify the operating environment etc.
and download the appropriate software as required.
Canon Global Site: https://global.canon/
● The functions that you can use may vary according to the following conditions.
- The device you are using and its settings
- The firmware version of the device
- The option structure of the device
- The driver you are using
- The driver version
- The computer environment you are using
● When printing from a Windows Store app, because you cannot display the print settings screen of the driver,
the number of functions you can set is limited.
● The screen content, procedures, etc. displayed and described in the manual may differ from those actually
displayed.
● In this manual, examples using Windows 11 are explained.

11
 Installing the Driver

Installing the Driver

Installing the Driver ....................................................................................................................................... 13
Pre-installation Check ......................................................................................................................................... 14
System Requirements ..................................................................................................................................... 15
Notes and Warnings Regarding Installation ................................................................................................... 17
About the Readme File ................................................................................................................................... 18
Installation Using the Installer .......................................................................................................................... 19
Installer Types ................................................................................................................................................ 20
Installing by Discovering Devices on a Network ............................................................................................. 22
Installing by Specifying a Port or IP Address ................................................................................................... 27
Installing Using a USB Connection .................................................................................................................. 35
Installing a Driver Using Master Setup ........................................................................................................... 39
Installation Without Using the Installer ............................................................................................................ 41
Installing by Specifying an inf File ................................................................................................................... 42
Installing Using a WSD Port ............................................................................................................................ 44
Updating/Uninstalling the Driver ...................................................................................................................... 46
Updating the Driver ........................................................................................................................................ 47
Uninstalling the Driver .................................................................................................................................... 49

12
 Installing the Driver

Installing the Driver

This explains items to check and various methods regarding driver installation.

Refer to the items to check before installing the driver.

The installation method differs according to the connection method and environment of the device to use.
Select the appropriate method for installation.

Also, refer to the procedure indicated here when updating or uninstalling the driver.
Pre-installation Check(P. 14)
Installation Using the Installer(P. 19)
Installation Without Using the Installer(P. 41)
Updating/Uninstalling the Driver(P. 46)

13
 Installing the Driver

Pre-installation Check

This explains what to confirm beforehand in order to install the driver correctly.
System Requirements(P. 15)
Notes and Warnings Regarding Installation(P. 17)
About the Readme File(P. 18)

14
 Installing the Driver

System Requirements

This driver can be used with the following system environments.

Operating Systems
Windows 10/11

Windows Server 2016/2019/2022

For server-based computing environments:

Operating systems in a server environment:
Windows Server 2016/2019/2022

Server components:
Citrix Virtual Apps and Desktops 7 1912(LTSR)/2203(LTSR)/2209/2212/2303/2305/2308
VMware vSphere 7.0/8.0
Microsoft Application Virtualization (App-V)
Remote Desktop Service on Windows Server 2016/2019/2022

Operating systems for a clustering server:

Windows Server 2016/2019/2022

Computer
A computer that runs any of the above operating system software properly.

NOTE

● For the support status of the newest operating systems and service packs, check the Canon web site (https://
global.canon/).
● The ARM architecture is not supported.

Combinations of Driver and Operating System Display Languages

Depending on the combination of supported driver languages and the display language of the operating
system, correct operation may not be guaranteed. It is recommended that you install with the language
selected by default when the installer starts.

Supported Driver Languages

For the UFR II/LIPSLX/PCL6/PS3 driver

English / Arabic / Basque / Catalan / Chinese (Simplified) / Chinese (Traditional) / Czech / Danish / Dutch /
Finnish / French / German / Hebrew / Hungarian / Italian / Japanese * / Korean / Malay / Norwegian / Polish /
Portuguese / Russian / Slovak / Spanish / Swedish / Thai / Turkish / Ukrainian / Vietnamese
* The PCL6 driver is not supported.

15
 Installing the Driver

For the LIPS4 driver

English / Japanese

Scope of Guaranteed Operation

Language of operating Language of operating system

system included in not included in supported
supported driver driver languages
languages

Installed with language matching the operating Guaranteed --

system

Installed with language not matching the Guaranteed*1 Not guaranteed*2

operating system

Changed to language not matching the operating Guaranteed*1 Not guaranteed*2

system after installation

*1 The layout may be broken or the driver may not be displayed correctly.
*2 Operation is only guaranteed when installed with English. However, the layout may be broken or the driver may not be
displayed correctly.

Services Required for the Acquire Device Information Function

If you want to use the acquire device information function, you need the following services and environments.

Operating System Services

● Remote Procedure (RPC)
● TCP/IP NetBIOS Helper Service
● Workstation

All the above services must be installed in the operating system. A setting other than disabled must be selected
for the [Startup type] setting of each service.

Protocols
UDP or TCP (IPv4 or IPv6)

Supported Device Connection Configurations

When connected to a network: TCP/IP

When connected locally: USB *

* May not be supported, depending on the driver, device, and architecture of the computer you are using.

16
 Installing the Driver

Notes and Warnings Regarding Installation

Take care of the following items when installing.

● If a screen requiring you to allow changes to the computer is displayed, allow the changes with an
administrator account.
● If a Windows Security screen indicating that the publisher of the driver cannot by verified is displayed, allow
installation.
● When acquiring driver information using the Canon Driver Information Assist Service, if a warning regarding
removing Windows Firewall blocking is displayed, remove the block.
● If you use the installer to install a driver, you can update existing drivers at the same time that you install the
new driver.

17
 Installing the Driver

About the Readme File

Restrictions and precautions regarding installing drivers or using drivers are included in the Readme file.

The Readme file is stored under the following name within the package folder of the driver.

Readme_en-US.hta

Also, if you are installing using the installer, you can refer to the Readme in the screen for selecting [Printer
Setup].

18
 Installing the Driver

Installation Using the Installer

Installer Types(P. 20)

Installing by Discovering Devices on a Network(P. 22)
Installing by Specifying a Port or IP Address(P. 27)
Installing Using a USB Connection(P. 35)
Installing a Driver Using Master Setup(P. 39)

19
 Installing the Driver

Installer Types

The installer that starts depends on the target device to install and how the installer was obtained.

For information on the suitable installer for a device, see the notice included with the device.

Either an integrated installer or Master Setup is used, depending on the device.

There are multiple methods for installing a device, which depend on the type of installer and the connection
method and environment of the device. Select the appropriate procedure to perform the installation process.

Driver-Specific Installer
An installer provided for one driver. Installs a single driver.

● Obtained from : Supplied CD-ROM, or downloaded from the website indicated in the notice included with the
device
● Executable name : [Setup.exe]

Integrated Installer
An installer that installs multiple drivers.

● Obtained from : Supplied CD-ROM

● Executable name : [MInst.exe]

Master Setup
An installer used for installing some target devices.

20
 Installing the Driver

● Obtained from : Downloaded from the website indicated in the notice included with the device
● Executable name : [Msetup4.exe]

Installation Procedure
When using a driver-specific installer or integrated installer
Installing by Discovering Devices on a Network(P. 22)
Installing by Specifying a Port or IP Address(P. 27)
Installing Using a USB Connection(P. 35)

When using Master Setup

Installing a Driver Using Master Setup(P. 39)

21
 Installing the Driver

Installing by Discovering Devices on a Network

You can search for devices on TCP/IP networks when installing the driver.

During installation, the configuration profile and device functions corresponding to the printer model are
automatically set. You can also change or import a configuration profile if necessary.

NOTE

● For network environments other than TCP/IP, refer to the procedure for installing by specifying a port or IP
address.
● If you do not know the network environment you are using, check with your network administrator.

Prerequisites
● System Requirements(P. 15)
● Enabling settings for both [Use WSD Printing] and [Multicast Discovery Settings] at the device (for network
environments that use WSD)
● Page description language selection (Plug & Play) function setting of the device
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the
setting method, refer to the manual of the device.
● The device is one that is on the same subnet as the computer you are using
● Notes and Warnings Regarding Installation(P. 17)
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Start the installer.

If you are using an installer downloaded from the web site:
Double-click the downloaded file to decompress it. If the installer does not start automatically after it is
decompressed, double-click [Setup.exe].
If you are using the accompanying CD-ROM:
(1) Set the CD-ROM in the computer.
If the CD-ROM menu is not displayed, click the subsequent "Open details."
Start the installer by following the procedure below.
- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute
[MInst.exe].
- If nothing is displayed: Double-click the CD-ROM icon.
- If the above [MInst.exe] does not exist: Execute [Setup.exe] in the driver folder of the CD-ROM.
If you executed [Setup.exe], proceed to step 2.(P. 23)
(2) If the language selection screen is displayed, select a language → click [OK].
(3) Click [Installation] from the menu screen.
(4) If the [Select the Type of Connection] screen is displayed, select [Network Connection] → click [Next].
(5) In the displayed screen, confirm that the driver(s) to be installed have been selected → click [Install].
(6) Confirm the content of the CANON SOFTWARE LICENSE AGREEMENT → click [Yes].

22
 Installing the Driver

2 Select a language → click [Next].

3 When the CANON SOFTWARE LICENSE AGREEMENT is displayed, confirm the content →
click [Yes].

4 Select [Standard] → click [Next].

[Reactivate Printers in the Sleep Mode and Search]: Select this when you want to detect devices on the network
that are in sleep mode.

5 Select the required items → click [Next].

[Canon Driver Information Assist Service]: Select this when you want to use the acquire device information
function in a print server environment.

23
 Installing the Driver

6 Select the device to install from [Printer List].

[IPv4 Devices]/[IPv6 Devices]/[WSD Devices]: The search results are displayed on the sheet corresponding to
the connection method of the device. Click a sheet to switch to it.
[Search Options]: Change the time for searching for devices. This enables you to extend the time spent
searching for devices when devices are not displayed in [Printer List].
You can enter the SNMP community name specified in the device to display the discovery results on the [IPv4
Devices]/[IPv6 Devices] sheet.
Set this when a name other than the default name "public" is specified in the device.
[Search Again]: Click this if the device is not displayed in [Printer List]. If the device is still not displayed after re-
searching, select [Custom] and install by specifying a port or IP address.

7 If you want to change the name of the device, set it as the default device or change
the configuration profile, select [Set Printer Information] → click [Next].
Otherwise, click [Next] and proceed to step 9.(P. 26)

24
 Installing the Driver

8 Change [Printer Name] → click [Next].

[Configuration Profile] > [Change]: Click this only when you need to change or import a configuration profile.
Click the subsequent "Open details" and perform the necessary operations.
Select a configuration profile.
When manually selecting a configuration profile:
Select a configuration profile from [Select Config. Profile] → click [OK].
When importing a configuration profile:
Click [Import] → select a configuration profile file (*.typ) → click [OK].

IMPORTANT

● If the device is connected to the computer you are using, under normal circumstances, set the installer so
that the configuration profile is automatically selected. If the computer cannot be connected to the device
and device information cannot be retrieved, or if it is necessary to customize the configuration profile,
manually select the configuration profile or import an exported profile.
[Create a shortcut on the desktop for Remote UI]: Creates a shortcut to the Remote UI of the device on the
desktop.
To update the IP address of the device set in the shortcut after installing the driver, or delete the shortcut, do
so manually.
[Set as Default]: Select this to set the device as the device that is normally used.
[Use as Shared Printer]: Select this if you want to share the device.

25
 Installing the Driver

9 Check [Printer List for Driver Installation] → click [Start].

[Select Printers to Update]: Click this when there are printers you do not need to update.
Proceed with the installation according to the instructions on the screen.

10 Click [Restart] or [Exit].

If device information cannot be acquired during installation, set the device information before printing. You can
also change or import a configuration profile while setting the device information.

For details about how to set the device information, refer to the driver help.

Related Topics
Installing by Specifying a Port or IP Address(P. 27)
Installing as a Print Server(P. 54)
Updating the Driver(P. 47)
How to Refer to the Help(P. 67)

26
 Installing the Driver

Installing by Specifying a Port or IP Address

You can manually specify the port or IP address to use for network connected or locally connected devices and
install the driver. Install according to this procedure when you cannot discover a device on the network or when
unique settings are required.

As well as using an existing port, you can add a new port.

If the device is connected during installation, a configuration profile corresponding to the printer model is set.
You can also change or import the configuration profile if necessary.

A device is installed for each applied configuration profile. You can also change the number of devices during
installation to simultaneously install multiple devices to which the same configuration profile is applied.

Prerequisites
● System Requirements(P. 15)
● Notes and Warnings Regarding Installation(P. 17)
● Confirm the port to be specified.
Specify a network connection port (standard TCP/IP port or WSD port) or local port. You can specify an
already registered port. You can select a temporary port ([LPT1] etc.) and set it after installation is complete.
● Confirm the name or IP address of the device (if adding a standard TCP/IP port or WSD port).
If you are installing by adding a network connection port (standard TCP/IP port or WSD port), you need to
enter the name (or host name) and IP address of the device. For the name of the device, use the name by
which the device is known on the network. If you do not know the value to set, check with your network
administrator.
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Start the installer.

If you are using an installer downloaded from the web site:
Double-click the downloaded file to decompress it. If the installer does not start automatically after it is
decompressed, double-click [Setup.exe].
If you are using the accompanying CD-ROM:
(1) Set the CD-ROM in the computer.
If the CD-ROM menu is not displayed, click the subsequent "Open details."
Start the installer by following the procedure below.
- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute
[MInst.exe].
- If nothing is displayed: Double-click the CD-ROM icon.
- If the above [MInst.exe] does not exist: Execute [Setup.exe] in the driver folder of the CD-ROM.
If you executed [Setup.exe], proceed to step 2.(P. 28)
(2) If the language selection screen is displayed, select a language → click [OK].
(3) Click [Installation] from the menu screen.
(4) If the [Select the Type of Connection] screen is displayed, select [Network Connection] → click [Next].
(5) In the displayed screen, confirm that the driver(s) to be installed have been selected → click [Install].

27
 Installing the Driver

(6) Confirm the content of the CANON SOFTWARE LICENSE AGREEMENT → click [Yes].

2 Select a language → click [Next].

3 When the CANON SOFTWARE LICENSE AGREEMENT is displayed, confirm the content →
click [Yes].

4 Select [Custom] → click [Next].

5 If the following screen is displayed, select [Add New Printers] → click [Next].
[Update Existing Printer Drivers]: Select this if you want to update drivers only. When you select this, in the
next screen, click [Select Printers to Update] → select the device to update from [Printer List] → click [OK]. Then
click [Start] → skip to step 11.(P. 33)
[Canon Driver Information Assist Service]: Select this when you want to use the acquire device information
function in a print server environment.

28
 Installing the Driver

6 Select a configuration profile → click [Next].

29
 Installing the Driver

IMPORTANT

● If the device is connected to the computer you are using, set [Auto Select] under normal circumstances.
Select the configuration profile manually only if the computer cannot be connected to the device and device
information cannot be retrieved, or if it is necessary to customize the configuration profile.

7 Set the port.

30
 Installing the Driver

When adding a port

(1) Click [Add Port] → select the type of port to add in [Port to Add] → click [OK].
You can add the following types of ports.
Standard TCP/IP / Local / WSD
(2) Follow the instructions in the displayed dialog box or wizard.
If you selected local port or WSD port, enter the value to set, then click [OK] and proceed to step 8.(P. 31)
If you selected standard TCP/IP port, a wizard is displayed. Follow the instructions in the wizard and proceed
to the next step.
(3) Enter the device name or IP address.
[Port Name] is automatically entered. Change the port name if required.
If the [Additional port information required] screen is displayed, click the subsequent "Open details" and
perform the necessary operations.
Perform one of the following.
- Return to the previous screen in the wizard → re-enter the information for [Printer Name or IP Address] →
click [Next].
- Select [Device Type] > [Standard] > [Canon Network Printing Device with P9100] → click [Next].
Depending on the device you are using, the name you select in [Device Type] > [Standard] may differ from
[Canon Network Printing Device with P9100].
When using an existing port
Select a port from [Port].

8 Set [Printer Name] if necessary.

[Configuration Profile] > [Change]: Click this only when you need to change or import a configuration profile.

31
 Installing the Driver

Click the subsequent "Open details" and perform the necessary operations.
Select a configuration profile.
When manually selecting a configuration profile:
Select a configuration profile from [Select Config. Profile] → click [OK].
When importing a configuration profile:
Click [Import] → select a configuration profile file (*.typ) → click [OK].
[Create a shortcut on the desktop for Remote UI]: Creates a shortcut to the Remote UI of the device on the
desktop. Enter the IP address of the device in [IP Address].
To update the IP address of the device set in the shortcut after installing the driver, or delete the shortcut, do
so manually.
[Set as Default]: Select this to set the device as the device that is normally used.
[Use as Shared Printer]: Select this if you want to share the device.
If you selected a network printer port, you cannot set [Printer Name] and [Use as Shared Printer].

9 If necessary, change the number of devices to be installed in [Devices] → click [Next].

You can change the number of devices for each configuration profile selected in step 6.(P. 29)
When you click [Next], the change to [Devices] is applied to [Current Printer] and [Number of Printers to Set].
[Current Printer] shows which number device is currently being set.
For an example of the number of devices being applied to [Current Printer]/[Number of Printers to Set], click
and refer to the subsequent "Open details."
An example where the following two configuration profiles are selected and the number of devices is changed
is shown below.
- Configuration profile A: changing from one device to three devices

32
 Installing the Driver

- Configuration profile B: one device

(1) For the devices to which configuration profile A is applied, the following values are initially displayed.
[Current Printer]: 1 / [Number of Printers to Set]: 2
(2) Change [Devices] from 1 to 3 → click [Next].
The information for devices to which configuration profile A is applied is updated as follows.
[Current Printer]: 2 / [Number of Printers to Set]: 4
This indicates that the device currently being set is the second device and that the total number of devices
installed is now four (The number of devices to which configuration profile A is applied is three, and the
number of devices to which configuration profile B is applied is one).

If multiple configuration profiles were selected in step 6.(P. 29) , or multiple devices were specified in [Devices],
the [Printer Information] screen is repeatedly displayed the number of times corresponding to [Number of
Printers to Set]. Repeat steps 7.(P. 30) to 9.(P. 32) for each device.

10 Check [Printer List for Driver Installation] → click [Start].

Proceed with the installation according to the instructions on the screen.

11 Click [Restart] or [Exit].

If device information cannot be acquired during installation, set the device information before printing. You can
also change or import a configuration profile while setting the device information.

For details about how to set the device information, refer to the driver help.

33
 Installing the Driver

Related Topics
Installing as a Print Server(P. 54)
Changing the Port(P. 58)
Updating the Driver(P. 47)
How to Refer to the Help(P. 67)

34
 Installing the Driver

Installing Using a USB Connection

You can connect the device and computer with a USB cable and install the driver.

During installation, the configuration profile corresponding to the printer model is automatically set. You can
change or import the configuration profile if necessary.

Prerequisites
● System Requirements(P. 15)
● Installation of the optional USB interface board (if required with the device you are using)
● Page description language selection (Plug & Play) function setting of the device (if required with the device
you are using)
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the
setting method, refer to the manual of the device.
● Notes and Warnings Regarding Installation(P. 17)
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Turn off the device.

2 Start the installer.

If you are using an installer downloaded from the web site:
Double-click the downloaded file to decompress it. If the installer does not start automatically after it is
decompressed, double-click [Setup.exe].
If you are using the accompanying CD-ROM:
(1) Set the CD-ROM in the computer.
If the CD-ROM menu is not displayed, click the subsequent "Open details."
Start the installer by following the procedure below.
- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute
[MInst.exe].
- If nothing is displayed: Double-click the CD-ROM icon.
- If the above [MInst.exe] does not exist: Execute [Setup.exe] in the driver folder of the CD-ROM.
If you executed [Setup.exe], proceed to step 3.(P. 35)
(2) If the language selection screen is displayed, select a language → click [OK].
(3) Click [Installation] from the menu screen.
(4) If the [Select the Type of Connection] screen is displayed, select [USB Connection] → click [Next].
(5) In the displayed screen, confirm that the driver(s) to be installed have been selected → click [Install].
(6) Confirm the content of the CANON SOFTWARE LICENSE AGREEMENT → click [Yes].

3 Select a language → click [Next].

35
 Installing the Driver

4 When the CANON SOFTWARE LICENSE AGREEMENT is displayed, confirm the content →
click [Yes].

5 Select [USB Connection] → click [Next].

6 When the following screen appears, connect the device and computer with a USB cable
→ turn on the device.
[Skip]: If correctly connected by USB, in this screen you can finish the installation without waiting for automatic
completion.

36
 Installing the Driver

Proceed with the installation according to the instructions on the screen.

If installation fails in the above screen, click the subsequent "Open details" and perform the necessary
operations.
Reinstall the driver after performing the following procedure.
(1) Connect the device and computer with a USB cable → turn on the device.
(2) Right-click the icon of the Start menu in Windows → select [Device Manager] from the menu.
(3) Right-click the target device in [Other devices] → select the menu for uninstalling the device.
(4) Confirm the device name.
Canon + <model name being used>

7 In the screen indicating the printer information, check whether the configuration
profile is suitable for the device.
[Configuration Profile] > [Change]: Click this only when you need to change or import a configuration profile.
Click the subsequent "Open details" and perform the necessary operations.
Select a configuration profile.
When manually selecting a configuration profile:
Select a configuration profile from [Select Config. Profile] → click [OK].
When importing a configuration profile:
Click [Import] → select a configuration profile file (*.typ) → click [OK].

IMPORTANT

● If the device is connected to the computer you are using, under normal circumstances, set the installer so
that the configuration profile is automatically selected. If the computer cannot be connected to the device

37
 Installing the Driver

and device information cannot be retrieved, or if it is necessary to customize the configuration profile,
manually select the configuration profile or import an exported profile.

8 Click [Restart] or [Exit].

If device information cannot be acquired during installation, set the device information before printing. You can
also change or import a configuration profile while setting the device information.

For details about how to set the device information, refer to the driver help.

Related Topics
How to Refer to the Help(P. 67)

38
 Installing the Driver

Installing a Driver Using Master Setup

Master Setup can install the driver for a device without worrying about the connection environment of the
target device (whether the device uses a network connection or USB connection).

Install the driver by following the instructions on the screen.

NOTE

● Master Setup does not support the following functions. Use an installer other than Master Setup if these
functions are required.
- Discovery of devices connected via IPv6
- Identification of multiple devices of the same model connected via USB
- Shared printer settings
- Installation of alternate drivers

Prerequisites
● The environment is connected to the Internet
● System Requirements(P. 15)
Installation using Master Setup is only supported with Windows 10/11.
● Page description language selection (Plug & Play) function setting of the device (if required with the device
you are using)
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the
setting method, refer to the manual of the device.
● The device is one that is on the same subnet as the computer you are using (when discovering a device
connected via a network)
● Notes and Warnings Regarding Installation(P. 17)
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Start the installer.

Extract the downloaded file, and double-click [Msetup4.exe].
If the combination of selected language and region is not supported by the driver, the driver is installed in the
language set for Windows.

2 Proceed with the installation according to the instructions on the screen.

3 Click [Finish], [Restart Now], or [Later].

A shortcut to the online manual is created on your desktop.

If device information cannot be acquired during installation, set the device information before printing. You can
also change or import a configuration profile while setting the device information.

39
 Installing the Driver

For details about how to set the device information, refer to the driver help.

Related Topics
How to Refer to the Help(P. 67)

40
 Installing the Driver

Installation Without Using the Installer

Installing by Specifying an inf File(P. 42)

Installing Using a WSD Port(P. 44)

41
 Installing the Driver

Installing by Specifying an inf File

You can install a driver by specifying an inf file with the add printer function of Windows. The following
explanation will be given with respect to installation with a standard TCP/IP port.

Prerequisites
● System Requirements(P. 15)
● Confirm the IP address of the device.
● Prepare the inf file.
Acquire the driver from the Canon web site (https://global.canon/) or the accompanying CD-ROM, and
prepare the inf file.
The inf file is stored in the [Driver] folder and [etc] folder in the folder of the driver you have acquired.
When updating all drivers installed on your computer
- Use the inf file in the [Driver] folder
When separately installing a new driver without updating the driver already installed on your computer
- Use the inf file in the [etc] folder
● Notes and Warnings Regarding Installation(P. 17)
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Start the Windows add printer wizard.

(1) Display [Bluetooth & devices] (or [Devices]) from [ Settings] in the Start menu.

(2) In [Printers & scanners], click [Add a printer or scanner] > [Add device] (or [Add a printer or scanner]).
(3) Click [The printer that I want isn’t listed] > [Add manually] (or [The printer that I want isn’t listed]).

2 Select local printer addition and proceed to the next screen.

3 Select [Create a new port] → select [Standard TCP/IP Port] from [Type of port] → click
[Next].

4 Enter the IP address of the device in [Hostname or IP address] → proceed according to

the instructions on the screen.
If the device cannot be found, it may be recognized as an unknown device. If so, click the subsequent "Open
details."
(1) Right-click the icon of the Start menu in Windows → select [Device Manager] from the menu.
(2) Select and right-click [Other devices] > [Unknown device] → select the menu for updating the driver.
(3) In the driver software update wizard, click [Browse my computer for drivers] → click [Let me pick from a list
of available drivers on my computer].
(4) Select [Printers] from [Common hardware types] → click [Next].

42
 Installing the Driver

5 In the [Install the printer driver] screen, click [Have Disk].

6 Click [Browse] → select the prepared inf file.

7 Select the device to use from [Printers] → click [Next].

8 Install the driver according to the instructions on the screen → click [Finish].

During installation, either one of [Basic Configuration] and [Basic Configuration (Compatible)] configuration
profiles will be set.

Set the device information after installation is complete. To enable the functions of the device, change to the
configuration profile that matches the device you are using and set the device function and option information.

For details about how to set the device information, refer to the driver help.

Related Topics
Changing the Port(P. 58)
How to Refer to the Help(P. 67)

43
 Installing the Driver

Installing Using a WSD Port

This explains the procedure for searching for devices on a network from the Windows printer list using a WSD
(Web Services on Devices) port, and installing the driver.

IMPORTANT

● If you want to install multiple drivers, share a standard TCP/IP port. You cannot install multiple drivers using
a WSD port.

Prerequisites
● System Requirements(P. 15)
● Page description language selection (Plug & Play) function setting of the device
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the
setting method, refer to the manual of the device.
● Installing by Specifying a Port or IP Address(P. 27)
Specify a temporary port ([LPT1] etc.) and install the driver.

Procedures

1 Display [Bluetooth & devices] (or [Devices]) from [ Settings] in the Start menu.

2 In [Printers & scanners], click [Add a printer or scanner] > [Add device] (or [Add a
printer or scanner]).

3 Click [Add device] for the target device.

During installation, either one of [Basic Configuration] and [Basic Configuration (Compatible)] configuration
profiles will be set.

Set the device information after installation is complete. To enable the functions of the device, change to the
configuration profile that matches the device you are using and set the device function and option information.

For details about how to set the device information, refer to the driver help.

NOTE

● If you install using a WSD port, you may not be able to retrieve device information, depending on the
connected device.
● After installation using the WSD port is complete, the device added to the printer list of Windows during
installation specifying the temporary port is unnecessary.
Select the device to be removed in the printer list of Windows, then select [Remove device] or click [Remove]
on the management screen for the device.
Refer to the above procedure for how to display the printer list of Windows.

44
 Installing the Driver

Related Topics
How to Refer to the Help(P. 67)
Cannot discover a device connected via a WSD port(P. 74)

45
 Installing the Driver

Updating/Uninstalling the Driver

This explains the driver updating and uninstalling methods.

Updating the Driver(P. 47)
Uninstalling the Driver(P. 49)

46
 Installing the Driver

Updating the Driver

You can update installed drivers to their newer versions.

It is recommended that you download the latest drivers corresponding to new functions and/or operating
systems, and update them.

You can update already installed drivers at the same time as installing a driver for a new device, but here the
procedure for updating installed drivers only is explained.

Prerequisites
● Acquire the installer
You can download the update installer from the Canon web site (https://global.canon/).
● Connect the device by USB cable and turn the power on (when updating a driver installed with a USB
connection).
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Start the installer → proceed according to the instructions on the screen.

2 Select [Custom] for [Printer Setup] → click [Next].

3 Select [Update Existing Printer Drivers] → click [Next].

47
 Installing the Driver

4 Check [Printer List for Driver Installation] → click [Start].

If there are devices whose drivers you do not intend to update, click [Select Printers to Update] → deselect the
devices from [Printer List] → click [OK].

5 Click [Exit].
Restart your computer when a message is displayed prompting you to do so.

When updating a driver on a print server, update the drivers on clients as well, referring to the procedure for
setting computers as shared printer clients.

Related Topics
Installing by Discovering Devices on a Network(P. 22)
Installing by Specifying a Port or IP Address(P. 27)
Installing Using a USB Connection(P. 35)
Setting up Clients of a Shared Printer(P. 56)

48
 Installing the Driver

Uninstalling the Driver

This explains the procedure for uninstalling a driver that is no longer needed. There are two methods: starting
the uninstaller from Windows, and using the uninstaller in the accompanying CD-ROM or downloaded driver
folder.

Prerequisites
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Start the uninstaller of the driver.

● When using Windows functions

(1) Display [Apps] (or [System]) > [Installed apps] (or [Apps & features]) from [ Settings] in the Start menu.

(2) Click […] for the driver you want to uninstall (or select the driver) → click [Uninstall].
● When using the uninstall file provided with the driver
Double-click one of the following files.
When using a file in an installed driver folder
Use [UNINSTAL.exe] corresponding to the driver in the following folder.
<install folder>\Canon\PrnUninstall
When using the file in the accompanying CD-ROM or downloaded driver folder
Use the following file in the folder of the driver you have acquired.
misc\UNINSTAL.exe
An uninstall file is not provided if Master Setup is used for installation. In that case, use the Windows function
to uninstall the driver.

2 Select the name of the device you want to uninstall → click [Delete].
[Cleanup]: Click this to simultaneously delete all files and registry information relating to all of the drivers
displayed in the list, not just the selected driver. Click [Delete] to perform a normal uninstallation of the driver.

49
 Installing the Driver

3 In the screen for confirming whether to delete the printer, click [Yes].
A confirmation message asking whether you want to delete the driver package as well may be displayed.

4 In the [Delete Printer] screen, click [Exit].

50
 Changing Settings to Match the Usage Environment

Changing Settings to Match the

Usage Environment
Changing Settings to Match the Usage Environment ................................................................ 52
Using a Shared Printer ........................................................................................................................................ 53
Installing as a Print Server .............................................................................................................................. 54
Setting up Clients of a Shared Printer ............................................................................................................. 56
Changing the Port ............................................................................................................................................... 58
Installing the PPD File (PS3) ................................................................................................................................ 62

51
 Changing Settings to Match the Usage Environment

Changing Settings to Match the Usage Environment

This explains shared printer settings, switching ports, and installing the PPD files.
Using a Shared Printer(P. 53)
Changing the Port(P. 58)
Installing the PPD File (PS3)(P. 62)

52
 Changing Settings to Match the Usage Environment

Using a Shared Printer

This explains the setting procedure for sharing a device with computers on the same network.
Installing as a Print Server(P. 54)
Setting up Clients of a Shared Printer(P. 56)

53
 Changing Settings to Match the Usage Environment

Installing as a Print Server

This explains how to configure the share settings of and install the driver in order to use a computer connected
to the device as a print server.

NOTE

● When [Department ID] and [PIN] are set for the department ID management function in the server side print
settings, they are not reflected in the client side print settings.

Prerequisites
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Start the installer → proceed according to the instructions on the screen.

2 If the [Select Process] screen is displayed, select [Add New Printers] and [Canon Driver
Information Assist Service] → click [Next].

3 Select the device to install from [Printer List] → click [Next].

4 Select [Use as Shared Printer] → change [Shared Name] if necessary → click [Next].
If a client computer with an operating system that differs from the print server is connected to a shared
printer, click [Drivers to Add] and select an alternate driver to automatically download an alternate driver.

54
 Changing Settings to Match the Usage Environment

5 Follow the instructions on the screen → click [Exit].

Related Topics
Installing by Discovering Devices on a Network(P. 22)
Installing by Specifying a Port or IP Address(P. 27)
Setting up Clients of a Shared Printer(P. 56)

55
 Changing Settings to Match the Usage Environment

Setting up Clients of a Shared Printer

This explains the procedure for enabling printing from a client computer (hereafter referred to an "a client")
using a print server on the same network.

In environments where Windows Update can be used, it is not necessary to use the installer in order for the
newest driver to be installed when selecting a print server.

Prerequisites
● Configure the share settings of the print server driver.
If the types of operating systems on the print server and clients differ, install the drivers for operating
systems supported by the clients on the print server.
To enable device information on the print server to be retrieved when creating a shared printer, enable the
following function in the driver on the print server side.
[Device Settings] sheet > [Details] > [Other Settings] > [Retrieve Device Information When Creating Shared
Printer]
● When starting the computer, log on as a user with administrator privileges.

NOTE

● If you are configuring the settings of a client in a workgroup environment, the user name and password for
logging onto the client must match the user name and password registered in the server.
● The driver settings of the server may not be reflected in the clients. If this happens, the driver version of the
clients may be older than that of the print server. Always update the client drivers to the newest version
together with print server updates.

Procedures

1 Display [Network] in Windows Explorer.

2 Double-click the computer (print server) you have set for print sharing.

3 Double-click the icon of the device for installation.

4 Click [Yes] in the displayed message.

5 Configure the settings according to the instructions in the wizard.

6 Restart the computer after installation is complete.

56
 Changing Settings to Match the Usage Environment

NOTE

● When [Department ID] and [PIN] are set for the department ID management function in the server side print
settings, they are not reflected in the client side print settings.

Related Topics
Installing as a Print Server(P. 54)
Updating the Driver(P. 47)

57
 Changing Settings to Match the Usage Environment

Changing the Port

This explains the procedure for changing the port used by a device connected to a network.

If you temporarily set a port for the device when installing the driver, change it to the correct port by following
this procedure.

Here, the method for creating a Raw or LPR port using a standard TCP/IP port is explained.

Prerequisites
● Driver installation
● Confirm the name or IP address of the device (if adding a standard TCP/IP port).
To add a standard TCP/IP port, you need to enter the name or IP address of the device. For the name of the
device, use the name by which the device is known on the network. If you do not know the device name or IP
address, check with your network administrator.
● Determining the protocol to use
Raw: A protocol that can be used with Windows. It transmits data at a higher speed than LPR.
LPR: The protocol commonly used by TCP/IP.
● When starting the computer, log on as a user with administrator privileges.

Procedures

1 Display the printer properties screen.

(1) Display [Bluetooth & devices] (or [Devices]) from [ Settings] in the Start menu.

(2) In [Printers & scanners], display the management screen for the device to set.
To display the management screen, click the device or click [Manage] for the corresponding device.
(3) Click [Printer properties] for the device to set.

2 Display the [Ports] sheet → set the port.

58
 Changing Settings to Match the Usage Environment

When using an existing port:

Select a port from [Port].
When adding a standard TCP/IP port:
(1) Click [Add Port] → select [Standard TCP/IP Port] from [Available port types] → click [New Port].
(2) Enter the device name or IP address according to the instructions of the wizard.
[Port Name] is automatically entered. Change the port name if required.
If the [Additional port information required] screen is displayed, click the subsequent "Open details" and
perform the necessary operations.
Perform one of the following.
- Return to the previous screen in the wizard → re-enter the information for [Printer Name or IP Address] →
click [Next].
- Select [Device Type] > [Standard] > [Canon Network Printing Device with P9100] → click [Next].
Depending on the device you are using, the name you select in [Device Type] > [Standard] may differ from
[Canon Network Printing Device with P9100].
(3) Click [Finish] → click [Close] in the [Printer Ports] dialog box.

3 If you want to configure the standard TCP/IP port, click [Configure Port].

59
 Changing Settings to Match the Usage Environment

4 Configure the port.

When using Raw:
Select [Raw] for [Protocol] → click [OK].
When using LPR:
(1) Select [LPR] for [Protocol] → specify one of the following print queues for [LPR Settings] > [Queue Name].
LP: Outputs according to the spool setting of the device. This is the setting that is normally used.
SPOOL: Always outputs after spooling to the hard disk, regardless of the device settings.
DIRECT: Always outputs without spooling to the hard disk, regardless of the device settings.
(2) Click [OK].

60
 Changing Settings to Match the Usage Environment

5 Click [Close].

61
 Changing Settings to Match the Usage Environment

Installing the PPD File (PS3)

This explains the procedure for installing the PPD (PostScript Printer Description) file used by the PS3 driver.

If you print with the driver from an application according to this operation, you can use the functions specific to
the device.

Prerequisites
● Acquire the PS3 driver from the Canon web site (https://global.canon/) or the accompanying CD-ROM.

Procedures

1 Double-click the file [gpps3.cab] in one of the following folders of the driver.
PS3\32BIT\Driver
PS3\x64\Driver

2 Copy [cns3gp.ppd] into the appropriate folder for the application you want to use.
For the PPD file copy destination, refer to the manual of each application.

62
 Printing

Printing
Printing .................................................................................................................................................................. 64
Printing from a Computer ................................................................................................................................... 65
How to Refer to the Help ..................................................................................................................................... 67

63
 Printing

Printing

This explains the procedures for basic printing operations. You can check the help for details on how to use the
driver.
Printing from a Computer(P. 65)
How to Refer to the Help(P. 67)

64
 Printing

Printing from a Computer

This explains the basic procedure for printing configuring the printer driver settings.

NOTE

● When using a device connected via a WSD port, enable [Use WSD Printing] at the device.

1 Open a document in the application → display the print screen.

2 Select the device you are using → click [Preferences].

Depending on the application, [Preferences] may be called "Printer properties" or "Properties."

3 In the print settings screen of the driver, set the required items.
If necessary, switch sheets and configure relevant settings.

65
 Printing

NOTE

● If the function you want to use is not displayed in the print settings screen, configure the print settings after
enabling the functions of the device by acquiring the device information etc.

4 Click [OK].

5 In the print screen, click [Print] or [OK].

Related Topics
About This Driver(P. 9)
How to Refer to the Help(P. 67)

66
 Printing

How to Refer to the Help

For details about how to use the driver and each of the functions, refer to the help.

The help is displayed by clicking [Help] in the print settings screen of the driver.

67
 Creating a Shortcut to the Online Manual

Creating a Shortcut to the Online

Manual
Creating a Shortcut to the Online Manual ........................................................................................ 69
Installing a Shortcut to the Online Manual ....................................................................................................... 70
Uninstalling the Shortcut to the Online Manual ............................................................................................... 71

68
 Creating a Shortcut to the Online Manual

Creating a Shortcut to the Online Manual

You can create a shortcut on your desktop to the website where online manuals for Canon products are
available.
Installing a Shortcut to the Online Manual(P. 70)
Uninstalling the Shortcut to the Online Manual(P. 71)

69
 Creating a Shortcut to the Online Manual

Installing a Shortcut to the Online Manual

This explains the procedure for installing a shortcut to the website where online manuals for Canon products
are available.

1 Insert the accompanying CD-ROM into your computer.

If the CD-ROM menu is not displayed, click the subsequent "Open details."
- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute
[MInst.exe].
- If nothing is displayed: Double-click the CD-ROM icon.

2 If the language selection screen is displayed, select a language → click [OK].

3 Click [Installation] from the menu screen.

4 Select only the [Manuals] in the displayed screen → click [Install].

5 Read the CANON SOFTWARE LICENSE AGREEMENT → click [Yes].

6 Check the installation destination → click [Install].

If you want to change the installation destination, click [Browse].
The installation operation begins.

7 Click [Exit].

8 Click [Next] in the [Install] screen → click [Exit].

The shortcut is created on your desktop.

70
 Creating a Shortcut to the Online Manual

Uninstalling the Shortcut to the Online Manual

This explains the procedure for uninstalling the shortcut to the website where online manuals for Canon
products are available, which is created with the accompanying CD-ROM.

1 Insert the accompanying CD-ROM into your computer.

If the CD-ROM menu is not displayed, click the subsequent "Open details."
- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute
[MInst.exe].
- If nothing is displayed: Double-click the CD-ROM icon.

2 If the language selection screen is displayed, select a language → click [OK].

3 Click [Start Software Programs] from the menu screen.

4 Click [Start] for [Manual Uninstaller] in the displayed screen.

5 Click [Next].
The uninstallation operation begins.

6 Click [Exit].

7 In the [Start Software Programs] screen, click [Back].

8 Click [Exit] in the CD-ROM menu screen.

71
 Troubleshooting

Troubleshooting
Troubleshooting ............................................................................................................................................... 73
Cannot discover a device connected via a WSD port ......................................................................................... 74

72
 Troubleshooting

Troubleshooting

This explains solutions to common problems.

Cannot discover a device connected via a WSD port(P. 74)

73
 Troubleshooting

Cannot discover a device connected via a WSD port

A number of causes can be considered. Change the settings as required while referring to each "Remedy."

Cause 1.
The device settings are incorrect.

Remedy
Check whether the following have been set at the device. If they have not been set, change the settings or
install the appropriate driver.
● The settings for both [Use WSD Printing] and [Multicast Discovery Settings] are enabled.
● [PDL Selection (Plug and Play)] and the page description language of the driver match.
For details about the setting method for the page description language (plug and play) function of the device,
refer to the manual of the device.

Cause 2.
The network settings of the operating system are incorrect.

Remedy
Check whether the necessary settings have been configured in the network settings of the operating system.
If they have not been set, change the settings.
(1) Display [Settings] > [Network & internet].
(2) Click [Properties] (or [Change connection properties]).
If you cannot find [Properties] (or [Change connection properties]), click the name of the connected network
in [Show available networks] to display the screen for selecting the network profile.
(3) Select a private network for the network profile.
If the above method cannot be used, follow the procedure below. The screen for selecting the network profile
may not be displayed, depending on your environment.
In Windows Server 2016
Display [Settings] > [Network & Internet] → click an icon displayed in the connection method to the current
network → enable [Make this PC discoverable].

Cause 3.
The device is not displayed in the discovery results because the driver corresponding to the discovered
device is already installed.

Remedy
If you want to install a driver by discovering a device, uninstall the driver first, then discover it again.

Related Topics
Installing Using a WSD Port(P. 44)
Uninstalling the Driver(P. 49)

74
 SIL OPEN FONT LICENSE

This Font Software is licensed under the SIL Open Font License,
Version 1.1.

This license is copied below, and is also available with a FAQ at:
http://scripts.sil.org/OFL

-----------------------------------------------------------
SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
-----------------------------------------------------------

PREAMBLE
The goals of the Open Font License (OFL) are to stimulate worldwide
development of collaborative font projects, to support the font
creation efforts of academic and linguistic communities, and to
provide a free and open framework in which fonts may be shared and
improved in partnership with others.

The OFL allows the licensed fonts to be used, studied, modified and
redistributed freely as long as they are not sold by themselves. The
fonts, including any derivative works, can be bundled, embedded,
redistributed and/or sold with any software provided that any reserved
names are not used by derivative works. The fonts and derivatives,
however, cannot be released under any other type of license. The
requirement for fonts to remain under this license does not apply to
any document created using the fonts or their derivatives.

DEFINITIONS
"Font Software" refers to the set of files released by the Copyright
Holder(s) under this license and clearly marked as such. This may
include source files, build scripts and documentation.

"Reserved Font Name" refers to any names specified as such after the
copyright statement(s).

"Original Version" refers to the collection of Font Software

components as distributed by the Copyright Holder(s).

"Modified Version" refers to any derivative made by adding to,

deleting, or substituting -- in part or in whole -- any of the
components of the Original Version, by changing formats or by porting
the Font Software to a new environment.

"Author" refers to any designer, engineer, programmer, technical

writer or other person who contributed to the Font Software.

PERMISSION & CONDITIONS

Permission is hereby granted, free of charge, to any person obtaining
a copy of the Font Software, to use, study, copy, merge, embed,
modify, redistribute, and sell modified and unmodified copies of the
Font Software, subject to the following conditions:

75
 SIL OPEN FONT LICENSE

1) Neither the Font Software nor any of its individual components, in

Original or Modified Versions, may be sold by itself.

2) Original or Modified Versions of the Font Software may be bundled,

redistributed and/or sold with any software, provided that each copy
contains the above copyright notice and this license. These can be
included either as stand-alone text files, human-readable headers or
in the appropriate machine-readable metadata fields within text or
binary files as long as those fields can be easily viewed by the user.

3) No Modified Version of the Font Software may use the Reserved Font
Name(s) unless explicit written permission is granted by the
corresponding Copyright Holder. This restriction only applies to the
primary font name as presented to the users.

4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font

Software shall not be used to promote, endorse or advertise any
Modified Version, except to acknowledge the contribution(s) of the
Copyright Holder(s) and the Author(s) or with their explicit written
permission.

5) The Font Software, modified or unmodified, in part or in whole,

must be distributed entirely under this license, and must not be
distributed under any other license. The requirement for fonts to
remain under this license does not apply to any document created using
the Font Software.

TERMINATION
This license becomes null and void if any of the above conditions are
not met.

DISCLAIMER
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
OTHER DEALINGS IN THE FONT SOFTWARE.

76